Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (67 commits)
  mmc: don't use weight32()
  pxamci: support arbitrary block size
  sdio: make the IRQ thread more resilient in the presence of bad states
  sdio: fix IRQ diagnostic message
  sdhci: remove old dma module params
  sdhci: add SDHCI_QUIRK_BROKEN_DMA quirk
  sdhci: remove DMA capability check from controller's PCI Class reg
  sdhci: fix a typo
  mmc: Disabler for Ricoh MMC controller
  sdio: adaptive interrupt polling
  mmc: pxamci: add SDIO card interrupt reporting capability
  mmc: pxamci: set proper buswidth capabilities according to PXA flavor
  mmc: pxamci: set proper block capabilities according to PXA flavor
  mmc: pxamci: better pending IRQ determination
  arm: i.MX/MX1 SDHC implements SD cards read-only switch read-back
  mmc: add led trigger
  mmc_spi host driver
  MMC core learns about SPI
  MMC/SD card driver learns SPI
  MMC headers learn about SPI
  ...

11 files changed, 533 insertions, 26 deletions

diff --git a/include/asm-arm/arch-imx/mmc.h b/include/asm-arm/arch-imx/mmc.h
index 84c726934ac..4712f354dcc 100644
--- a/include/asm-arm/arch-imx/mmc.h
+++ b/include/asm-arm/arch-imx/mmc.h
@@ -3,8 +3,11 @@
 
 #include <linux/mmc/host.h>
 
+struct device;
+
 struct imxmmc_platform_data {
-	int (*card_present)(void);
+	int (*card_present)(struct device *);
+	int (*get_ro)(struct device *);
 };
 
 extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index badf702fcff..0d508ac17d6 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -55,7 +55,28 @@ struct sd_switch_caps {
 	unsigned int		hs_max_dtr;
 };
 
+struct sdio_cccr {
+	unsigned int		sdio_vsn;
+	unsigned int		sd_vsn;
+	unsigned int		multi_block:1,
+				low_speed:1,
+				wide_bus:1,
+				high_power:1,
+				high_speed:1;
+};
+
+struct sdio_cis {
+	unsigned short		vendor;
+	unsigned short		device;
+	unsigned short		blksize;
+	unsigned int		max_dtr;
+};
+
 struct mmc_host;
+struct sdio_func;
+struct sdio_func_tuple;
+
+#define SDIO_MAX_FUNCS		7
 
 /*
  * MMC device
@@ -67,11 +88,13 @@ struct mmc_card {
 	unsigned int		type;		/* card type */
 #define MMC_TYPE_MMC		0		/* MMC card */
 #define MMC_TYPE_SD		1		/* SD card */
+#define MMC_TYPE_SDIO		2		/* SDIO card */
 	unsigned int		state;		/* (our) card state */
 #define MMC_STATE_PRESENT	(1<<0)		/* present in sysfs */
 #define MMC_STATE_READONLY	(1<<1)		/* card is read-only */
 #define MMC_STATE_HIGHSPEED	(1<<2)		/* card is in high speed mode */
 #define MMC_STATE_BLOCKADDR	(1<<3)		/* card uses block-addressing */
+
 	u32			raw_cid[4];	/* raw card CID */
 	u32			raw_csd[4];	/* raw card CSD */
 	u32			raw_scr[2];	/* raw card SCR */
@@ -80,10 +103,19 @@ struct mmc_card {
 	struct mmc_ext_csd	ext_csd;	/* mmc v4 extended card specific */
 	struct sd_scr		scr;		/* extra SD information */
 	struct sd_switch_caps	sw_caps;	/* switch (CMD6) caps */
+
+	unsigned int		sdio_funcs;	/* number of SDIO functions */
+	struct sdio_cccr	cccr;		/* common card info */
+	struct sdio_cis		cis;		/* common tuple info */
+	struct sdio_func	*sdio_func[SDIO_MAX_FUNCS]; /* SDIO functions (devices) */
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+	struct sdio_func_tuple	*tuples;	/* unknown common tuples */
 };
 
 #define mmc_card_mmc(c)		((c)->type == MMC_TYPE_MMC)
 #define mmc_card_sd(c)		((c)->type == MMC_TYPE_SD)
+#define mmc_card_sdio(c)	((c)->type == MMC_TYPE_SDIO)
 
 #define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
 #define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 63a80ea6112..d0c3abed74c 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -25,14 +25,20 @@ struct mmc_command {
 #define MMC_RSP_CRC	(1 << 2)		/* expect valid crc */
 #define MMC_RSP_BUSY	(1 << 3)		/* card may send busy */
 #define MMC_RSP_OPCODE	(1 << 4)		/* response contains opcode */
-#define MMC_CMD_MASK	(3 << 5)		/* command type */
+
+#define MMC_CMD_MASK	(3 << 5)		/* non-SPI command type */
 #define MMC_CMD_AC	(0 << 5)
 #define MMC_CMD_ADTC	(1 << 5)
 #define MMC_CMD_BC	(2 << 5)
 #define MMC_CMD_BCR	(3 << 5)
 
+#define MMC_RSP_SPI_S1	(1 << 7)		/* one status byte */
+#define MMC_RSP_SPI_S2	(1 << 8)		/* second byte */
+#define MMC_RSP_SPI_B4	(1 << 9)		/* four data bytes */
+#define MMC_RSP_SPI_BUSY (1 << 10)		/* card may send busy */
+
 /*
- * These are the response types, and correspond to valid bit
+ * These are the native response types, and correspond to valid bit
  * patterns of the above flags.  One additional valid pattern
  * is all zeros, which means we don't expect a response.
  */
@@ -41,12 +47,30 @@ struct mmc_command {
 #define MMC_RSP_R1B	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
 #define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
 #define MMC_RSP_R3	(MMC_RSP_PRESENT)
+#define MMC_RSP_R4	(MMC_RSP_PRESENT)
+#define MMC_RSP_R5	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 #define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 #define MMC_RSP_R7	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 
 #define mmc_resp_type(cmd)	((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
 
 /*
+ * These are the SPI response types for MMC, SD, and SDIO cards.
+ * Commands return R1, with maybe more info.  Zero is an error type;
+ * callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
+ */
+#define MMC_RSP_SPI_R1	(MMC_RSP_SPI_S1)
+#define MMC_RSP_SPI_R1B	(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
+#define MMC_RSP_SPI_R2	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R3	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R4	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+#define MMC_RSP_SPI_R5	(MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
+#define MMC_RSP_SPI_R7	(MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
+
+#define mmc_spi_resp_type(cmd)	((cmd)->flags & \
+		(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
+
+/*
  * These are the command types.
  */
 #define mmc_cmd_type(cmd)	((cmd)->flags & MMC_CMD_MASK)
@@ -54,12 +78,19 @@ struct mmc_command {
 	unsigned int		retries;	/* max number of retries */
 	unsigned int		error;		/* command error */
 
-#define MMC_ERR_NONE	0
-#define MMC_ERR_TIMEOUT	1
-#define MMC_ERR_BADCRC	2
-#define MMC_ERR_FIFO	3
-#define MMC_ERR_FAILED	4
-#define MMC_ERR_INVALID	5
+/*
+ * Standard errno values are used for errors, but some have specific
+ * meaning in the MMC layer:
+ *
+ * ETIMEDOUT    Card took too long to respond
+ * EILSEQ       Basic format problem with the received or sent data
+ *              (e.g. CRC check failed, incorrect opcode in response
+ *              or bad end bit)
+ * EINVAL       Request cannot be performed because of restrictions
+ *              in hardware and/or the driver
+ * ENOMEDIUM    Host can determine that the slot is empty and is
+ *              actively failing requests
+ */
 
 	struct mmc_data		*data;		/* data segment associated with cmd */
 	struct mmc_request	*mrq;		/* associated request */
@@ -76,7 +107,6 @@ struct mmc_data {
 #define MMC_DATA_WRITE	(1 << 8)
 #define MMC_DATA_READ	(1 << 9)
 #define MMC_DATA_STREAM	(1 << 10)
-#define MMC_DATA_MULTI	(1 << 11)
 
 	unsigned int		bytes_xfered;
 
@@ -104,9 +134,20 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
 extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);
 
-extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
 
-extern void mmc_claim_host(struct mmc_host *host);
+extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
 extern void mmc_release_host(struct mmc_host *host);
 
+/**
+ *	mmc_claim_host - exclusively claim a host
+ *	@host: mmc host to claim
+ *
+ *	Claim a host for a set of operations.
+ */
+static inline void mmc_claim_host(struct mmc_host *host)
+{
+	__mmc_claim_host(host, NULL);
+}
+
 #endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index b1350dfd3e9..125eee1407f 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -10,6 +10,8 @@
 #ifndef LINUX_MMC_HOST_H
 #define LINUX_MMC_HOST_H
 
+#include <linux/leds.h>
+
 #include <linux/mmc/core.h>
 
 struct mmc_ios {
@@ -51,6 +53,7 @@ struct mmc_host_ops {
 	void	(*request)(struct mmc_host *host, struct mmc_request *req);
 	void	(*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
 	int	(*get_ro)(struct mmc_host *host);
+	void	(*enable_sdio_irq)(struct mmc_host *host, int enable);
 };
 
 struct mmc_card;
@@ -87,9 +90,10 @@ struct mmc_host {
 
 #define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
 #define MMC_CAP_MULTIWRITE	(1 << 1)	/* Can accurately report bytes sent to card on error */
-#define MMC_CAP_BYTEBLOCK	(1 << 2)	/* Can do non-log2 block sizes */
-#define MMC_CAP_MMC_HIGHSPEED	(1 << 3)	/* Can do MMC high-speed timing */
-#define MMC_CAP_SD_HIGHSPEED	(1 << 4)	/* Can do SD high-speed timing */
+#define MMC_CAP_MMC_HIGHSPEED	(1 << 2)	/* Can do MMC high-speed timing */
+#define MMC_CAP_SD_HIGHSPEED	(1 << 3)	/* Can do SD high-speed timing */
+#define MMC_CAP_SDIO_IRQ	(1 << 4)	/* Can signal pending SDIO IRQs */
+#define MMC_CAP_SPI		(1 << 5)	/* Talks only SPI protocols */
 
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
@@ -106,6 +110,14 @@ struct mmc_host {
 	struct mmc_ios		ios;		/* current io bus settings */
 	u32			ocr;		/* the current OCR setting */
 
+	/* group bitfields together to minimize padding */
+	unsigned int		use_spi_crc:1;
+	unsigned int		claimed:1;	/* host exclusively claimed */
+	unsigned int		bus_dead:1;	/* bus has been released */
+#ifdef CONFIG_MMC_DEBUG
+	unsigned int		removed:1;	/* host is being removed */
+#endif
+
 	unsigned int		mode;		/* current card mode of host */
 #define MMC_MODE_MMC		0
 #define MMC_MODE_SD		1
@@ -113,16 +125,19 @@ struct mmc_host {
 	struct mmc_card		*card;		/* device attached to this host */
 
 	wait_queue_head_t	wq;
-	unsigned int		claimed:1;	/* host exclusively claimed */
 
 	struct delayed_work	detect;
-#ifdef CONFIG_MMC_DEBUG
-	unsigned int		removed:1;	/* host is being removed */
-#endif
 
 	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
 	unsigned int		bus_refs;	/* reference counter */
-	unsigned int		bus_dead:1;	/* bus has been released */
+
+	unsigned int		sdio_irqs;
+	struct task_struct	*sdio_irq_thread;
+	atomic_t		sdio_irq_thread_abort;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+	struct led_trigger	*led;		/* activity led */
+#endif
 
 	unsigned long		private[0] ____cacheline_aligned;
 };
@@ -137,6 +152,8 @@ static inline void *mmc_priv(struct mmc_host *host)
 	return (void *)host->private;
 }
 
+#define mmc_host_is_spi(host)	((host)->caps & MMC_CAP_SPI)
+
 #define mmc_dev(x)	((x)->parent)
 #define mmc_classdev(x)	(&(x)->class_dev)
 #define mmc_hostname(x)	((x)->class_dev.bus_id)
@@ -147,5 +164,11 @@ extern int mmc_resume_host(struct mmc_host *);
 extern void mmc_detect_change(struct mmc_host *, unsigned long delay);
 extern void mmc_request_done(struct mmc_host *, struct mmc_request *);
 
+static inline void mmc_signal_sdio_irq(struct mmc_host *host)
+{
+	host->ops->enable_sdio_irq(host, 0);
+	wake_up_process(host->sdio_irq_thread);
+}
+
 #endif
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index e3ed9b95040..4236fbf0b6f 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -27,7 +27,7 @@
 
 /* Standard MMC commands (4.1)           type  argument     response */
    /* class 1 */
-#define	MMC_GO_IDLE_STATE         0   /* bc                          */
+#define MMC_GO_IDLE_STATE         0   /* bc                          */
 #define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
 #define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
 #define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
@@ -39,8 +39,10 @@
 #define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
 #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
 #define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
-#define MMC_SEND_STATUS	         13   /* ac   [31:16] RCA        R1  */
+#define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
 #define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
+#define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
+#define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
 
   /* class 2 */
 #define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
@@ -90,15 +92,15 @@
  */
 
 /*
-  MMC status in R1
+  MMC status in R1, for native mode (SPI bits are different)
   Type
-  	e : error bit
+	e : error bit
 	s : status bit
 	r : detected and set for the actual command response
 	x : detected and set during command execution. the host must poll
             the card by sending status command in order to read these bits.
   Clear condition
-  	a : according to the card state
+	a : according to the card state
 	b : always related to the previous command. Reception of
             a valid command will clear it (with a delay of one command)
 	c : clear by read
@@ -124,10 +126,33 @@
 #define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
 #define R1_ERASE_RESET		(1 << 13)	/* sr, c */
 #define R1_STATUS(x)            (x & 0xFFFFE000)
-#define R1_CURRENT_STATE(x)    	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
+#define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
 #define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
 #define R1_APP_CMD		(1 << 5)	/* sr, c */
 
+/*
+ * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
+ * R1 is the low order byte; R2 is the next highest byte, when present.
+ */
+#define R1_SPI_IDLE		(1 << 0)
+#define R1_SPI_ERASE_RESET	(1 << 1)
+#define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
+#define R1_SPI_COM_CRC		(1 << 3)
+#define R1_SPI_ERASE_SEQ	(1 << 4)
+#define R1_SPI_ADDRESS		(1 << 5)
+#define R1_SPI_PARAMETER	(1 << 6)
+/* R1 bit 7 is always zero */
+#define R2_SPI_CARD_LOCKED	(1 << 8)
+#define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
+#define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
+#define R2_SPI_ERROR		(1 << 10)
+#define R2_SPI_CC_ERROR		(1 << 11)
+#define R2_SPI_CARD_ECC_ERROR	(1 << 12)
+#define R2_SPI_WP_VIOLATION	(1 << 13)
+#define R2_SPI_ERASE_PARAM	(1 << 14)
+#define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
+#define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
+
 /* These are unpacked versions of the actual responses */
 
 struct _mmc_csd {
@@ -182,6 +207,7 @@ struct _mmc_csd {
  */
 #define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
 					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
+					/* (and for SPI, CMD58,59) */
 #define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
 					/* (CMD11) */
 #define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
@@ -227,6 +253,7 @@ struct _mmc_csd {
 #define EXT_CSD_BUS_WIDTH	183	/* R/W */
 #define EXT_CSD_HS_TIMING	185	/* R/W */
 #define EXT_CSD_CARD_TYPE	196	/* RO */
+#define EXT_CSD_REV		192	/* RO */
 #define EXT_CSD_SEC_CNT		212	/* RO, 4 bytes */
 
 /*
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
new file mode 100644
index 00000000000..47ba464f517
--- /dev/null
+++ b/include/linux/mmc/sdio.h
@@ -0,0 +1,159 @@
+/*
+ *  include/linux/mmc/sdio.h
+ *
+ *  Copyright 2006-2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SDIO_H
+#define MMC_SDIO_H
+
+/* SDIO commands                         type  argument     response */
+#define SD_IO_SEND_OP_COND          5 /* bcr  [23:0] OCR         R4  */
+#define SD_IO_RW_DIRECT            52 /* ac   [31:0] See below   R5  */
+#define SD_IO_RW_EXTENDED          53 /* adtc [31:0] See below   R5  */
+
+/*
+ * SD_IO_RW_DIRECT argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] RAW flag
+ *      [25:9] Register address
+ *      [7:0] Data
+ */
+
+/*
+ * SD_IO_RW_EXTENDED argument format:
+ *
+ *      [31] R/W flag
+ *      [30:28] Function number
+ *      [27] Block mode
+ *      [26] Increment address
+ *      [25:9] Register address
+ *      [8:0] Byte/block count
+ */
+
+/*
+  SDIO status in R5
+  Type
+	e : error bit
+	s : status bit
+	r : detected and set for the actual command response
+	x : detected and set during command execution. the host must poll
+            the card by sending status command in order to read these bits.
+  Clear condition
+	a : according to the card state
+	b : always related to the previous command. Reception of
+            a valid command will clear it (with a delay of one command)
+	c : clear by read
+ */
+
+#define R5_COM_CRC_ERROR	(1 << 15)	/* er, b */
+#define R5_ILLEGAL_COMMAND	(1 << 14)	/* er, b */
+#define R5_ERROR		(1 << 11)	/* erx, c */
+#define R5_FUNCTION_NUMBER	(1 << 9)	/* er, c */
+#define R5_OUT_OF_RANGE		(1 << 8)	/* er, c */
+#define R5_STATUS(x)		(x & 0xCB00)
+#define R5_IO_CURRENT_STATE(x)	((x & 0x3000) >> 12) /* s, b */
+
+/*
+ * Card Common Control Registers (CCCR)
+ */
+
+#define SDIO_CCCR_CCCR		0x00
+
+#define  SDIO_CCCR_REV_1_00	0	/* CCCR/FBR Version 1.00 */
+#define  SDIO_CCCR_REV_1_10	1	/* CCCR/FBR Version 1.10 */
+#define  SDIO_CCCR_REV_1_20	2	/* CCCR/FBR Version 1.20 */
+
+#define  SDIO_SDIO_REV_1_00	0	/* SDIO Spec Version 1.00 */
+#define  SDIO_SDIO_REV_1_10	1	/* SDIO Spec Version 1.10 */
+#define  SDIO_SDIO_REV_1_20	2	/* SDIO Spec Version 1.20 */
+#define  SDIO_SDIO_REV_2_00	3	/* SDIO Spec Version 2.00 */
+
+#define SDIO_CCCR_SD		0x01
+
+#define  SDIO_SD_REV_1_01	0	/* SD Physical Spec Version 1.01 */
+#define  SDIO_SD_REV_1_10	1	/* SD Physical Spec Version 1.10 */
+#define  SDIO_SD_REV_2_00	2	/* SD Physical Spec Version 2.00 */
+
+#define SDIO_CCCR_IOEx		0x02
+#define SDIO_CCCR_IORx		0x03
+
+#define SDIO_CCCR_IENx		0x04	/* Function/Master Interrupt Enable */
+#define SDIO_CCCR_INTx		0x05	/* Function Interrupt Pending */
+
+#define SDIO_CCCR_ABORT		0x06	/* function abort/card reset */
+
+#define SDIO_CCCR_IF		0x07	/* bus interface controls */
+
+#define  SDIO_BUS_WIDTH_1BIT	0x00
+#define  SDIO_BUS_WIDTH_4BIT	0x02
+
+#define  SDIO_BUS_CD_DISABLE     0x80	/* disable pull-up on DAT3 (pin 1) */
+
+#define SDIO_CCCR_CAPS		0x08
+
+#define  SDIO_CCCR_CAP_SDC	0x01	/* can do CMD52 while data transfer */
+#define  SDIO_CCCR_CAP_SMB	0x02	/* can do multi-block xfers (CMD53) */
+#define  SDIO_CCCR_CAP_SRW	0x04	/* supports read-wait protocol */
+#define  SDIO_CCCR_CAP_SBS	0x08	/* supports suspend/resume */
+#define  SDIO_CCCR_CAP_S4MI	0x10	/* interrupt during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_E4MI	0x20	/* enable ints during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_LSC	0x40	/* low speed card */
+#define  SDIO_CCCR_CAP_4BLS	0x80	/* 4 bit low speed card */
+
+#define SDIO_CCCR_CIS		0x09	/* common CIS pointer (3 bytes) */
+
+/* Following 4 regs are valid only if SBS is set */
+#define SDIO_CCCR_SUSPEND	0x0c
+#define SDIO_CCCR_SELx		0x0d
+#define SDIO_CCCR_EXECx		0x0e
+#define SDIO_CCCR_READYx	0x0f
+
+#define SDIO_CCCR_BLKSIZE	0x10
+
+#define SDIO_CCCR_POWER		0x12
+
+#define  SDIO_POWER_SMPC	0x01	/* Supports Master Power Control */
+#define  SDIO_POWER_EMPC	0x02	/* Enable Master Power Control */
+
+#define SDIO_CCCR_SPEED		0x13
+
+#define  SDIO_SPEED_SHS		0x01	/* Supports High-Speed mode */
+#define  SDIO_SPEED_EHS		0x02	/* Enable High-Speed mode */
+
+/*
+ * Function Basic Registers (FBR)
+ */
+
+#define SDIO_FBR_BASE(f)	((f) * 0x100) /* base of function f's FBRs */
+
+#define SDIO_FBR_STD_IF		0x00
+
+#define  SDIO_FBR_SUPPORTS_CSA	0x40	/* supports Code Storage Area */
+#define  SDIO_FBR_ENABLE_CSA	0x80	/* enable Code Storage Area */
+
+#define SDIO_FBR_STD_IF_EXT	0x01
+
+#define SDIO_FBR_POWER		0x02
+
+#define  SDIO_FBR_POWER_SPS	0x01	/* Supports Power Selection */
+#define  SDIO_FBR_POWER_EPS	0x02	/* Enable (low) Power Selection */
+
+#define SDIO_FBR_CIS		0x09	/* CIS pointer (3 bytes) */
+
+
+#define SDIO_FBR_CSA		0x0C	/* CSA pointer (3 bytes) */
+
+#define SDIO_FBR_CSA_DATA	0x0F
+
+#define SDIO_FBR_BLKSIZE	0x10	/* block size (2 bytes) */
+
+#endif
+
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
new file mode 100644
index 00000000000..b050f4d7b41
--- /dev/null
+++ b/include/linux/mmc/sdio_func.h
@@ -0,0 +1,153 @@
+/*
+ *  include/linux/mmc/sdio_func.h
+ *
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#ifndef MMC_SDIO_FUNC_H
+#define MMC_SDIO_FUNC_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct mmc_card;
+struct sdio_func;
+
+typedef void (sdio_irq_handler_t)(struct sdio_func *);
+
+/*
+ * SDIO function CIS tuple (unknown to the core)
+ */
+struct sdio_func_tuple {
+	struct sdio_func_tuple *next;
+	unsigned char code;
+	unsigned char size;
+	unsigned char data[0];
+};
+
+/*
+ * SDIO function devices
+ */
+struct sdio_func {
+	struct mmc_card		*card;		/* the card this device belongs to */
+	struct device		dev;		/* the device */
+	sdio_irq_handler_t	*irq_handler;	/* IRQ callback */
+	unsigned int		num;		/* function number */
+
+	unsigned char		class;		/* standard interface class */
+	unsigned short		vendor;		/* vendor id */
+	unsigned short		device;		/* device id */
+
+	unsigned		max_blksize;	/* maximum block size */
+	unsigned		cur_blksize;	/* current block size */
+
+	unsigned int		state;		/* function state */
+#define SDIO_STATE_PRESENT	(1<<0)		/* present in sysfs */
+
+	u8			tmpbuf[4];	/* DMA:able scratch buffer */
+
+	unsigned		num_info;	/* number of info strings */
+	const char		**info;		/* info strings */
+
+	struct sdio_func_tuple *tuples;
+};
+
+#define sdio_func_present(f)	((f)->state & SDIO_STATE_PRESENT)
+
+#define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT)
+
+#define sdio_func_id(f)		((f)->dev.bus_id)
+
+#define sdio_get_drvdata(f)	dev_get_drvdata(&(f)->dev)
+#define sdio_set_drvdata(f,d)	dev_set_drvdata(&(f)->dev, d)
+
+/*
+ * SDIO function device driver
+ */
+struct sdio_driver {
+	char *name;
+	const struct sdio_device_id *id_table;
+
+	int (*probe)(struct sdio_func *, const struct sdio_device_id *);
+	void (*remove)(struct sdio_func *);
+
+	struct device_driver drv;
+};
+
+/**
+ * SDIO_DEVICE - macro used to describe a specific SDIO device
+ * @vend: the 16 bit manufacturer code
+ * @dev: the 16 bit function id
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific device. The class field will be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE(vend,dev) \
+	.class = SDIO_ANY_ID, \
+	.vendor = (vend), .device = (dev)
+
+/**
+ * SDIO_DEVICE_CLASS - macro used to describe a specific SDIO device class
+ * @dev_class: the 8 bit standard interface code
+ *
+ * This macro is used to create a struct sdio_device_id that matches a
+ * specific standard SDIO function type.  The vendor and device fields will
+ * be set to SDIO_ANY_ID.
+ */
+#define SDIO_DEVICE_CLASS(dev_class) \
+	.class = (dev_class), \
+	.vendor = SDIO_ANY_ID, .device = SDIO_ANY_ID
+
+extern int sdio_register_driver(struct sdio_driver *);
+extern void sdio_unregister_driver(struct sdio_driver *);
+
+/*
+ * SDIO I/O operations
+ */
+extern void sdio_claim_host(struct sdio_func *func);
+extern void sdio_release_host(struct sdio_func *func);
+
+extern int sdio_enable_func(struct sdio_func *func);
+extern int sdio_disable_func(struct sdio_func *func);
+
+extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz);
+
+extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler);
+extern int sdio_release_irq(struct sdio_func *func);
+
+extern unsigned char sdio_readb(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern unsigned short sdio_readw(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern unsigned long sdio_readl(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+extern int sdio_readsb(struct sdio_func *func, void *dst,
+	unsigned int addr, int count);
+
+extern void sdio_writeb(struct sdio_func *func, unsigned char b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writew(struct sdio_func *func, unsigned short b,
+	unsigned int addr, int *err_ret);
+extern void sdio_writel(struct sdio_func *func, unsigned long b,
+	unsigned int addr, int *err_ret);
+
+extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+extern int sdio_writesb(struct sdio_func *func, unsigned int addr,
+	void *src, int count);
+
+extern unsigned char sdio_f0_readb(struct sdio_func *func,
+	unsigned int addr, int *err_ret);
+extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
+	unsigned int addr, int *err_ret);
+
+#endif
+
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
new file mode 100644
index 00000000000..09306d47ff5
--- /dev/null
+++ b/include/linux/mmc/sdio_ids.h
@@ -0,0 +1,23 @@
+/*
+ * SDIO Classes, Interface Types, Manufacturer IDs, etc.
+ */
+
+#ifndef MMC_SDIO_IDS_H
+#define MMC_SDIO_IDS_H
+
+/*
+ * Standard SDIO Function Interfaces
+ */
+
+#define SDIO_CLASS_NONE		0x00	/* Not a SDIO standard interface */
+#define SDIO_CLASS_UART		0x01	/* standard UART interface */
+#define SDIO_CLASS_BT_A		0x02	/* Type-A BlueTooth std interface */
+#define SDIO_CLASS_BT_B		0x03	/* Type-B BlueTooth std interface */
+#define SDIO_CLASS_GPS		0x04	/* GPS standard interface */
+#define SDIO_CLASS_CAMERA	0x05	/* Camera standard interface */
+#define SDIO_CLASS_PHS		0x06	/* PHS standard interface */
+#define SDIO_CLASS_WLAN		0x07	/* WLAN interface */
+#define SDIO_CLASS_ATA		0x08	/* Embedded SDIO-ATA std interface */
+
+
+#endif
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 4dc5fa8be78..e47e5951058 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -340,4 +340,15 @@ struct parisc_device_id {
 #define PA_HVERSION_ANY_ID	0xffff
 #define PA_SVERSION_ANY_ID	0xffffffff
 
+/* SDIO */
+
+#define SDIO_ANY_ID (~0)
+
+struct sdio_device_id {
+	__u8	class;			/* Standard interface or SDIO_ANY_ID */
+	__u16	vendor;			/* Vendor or SDIO_ANY_ID */
+	__u16	device;			/* Device ID or SDIO_ANY_ID */
+	kernel_ulong_t driver_data;	/* Data private to the driver */
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 55f307ffbf9..c8636bb3e3a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1471,6 +1471,8 @@
 #define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
 #define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
 #define PCI_DEVICE_ID_RICOH_R5C822	0x0822
+#define PCI_DEVICE_ID_RICOH_R5C832	0x0832
+#define PCI_DEVICE_ID_RICOH_R5C843	0x0843
 
 #define PCI_VENDOR_ID_DLINK		0x1186
 #define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
new file mode 100644
index 00000000000..e9bbe3ebd72
--- /dev/null
+++ b/include/linux/spi/mmc_spi.h
@@ -0,0 +1,33 @@
+#ifndef __LINUX_SPI_MMC_SPI_H
+#define __LINUX_SPI_MMC_SPI_H
+
+struct device;
+struct mmc_host;
+
+/* Put this in platform_data of a device being used to manage an MMC/SD
+ * card slot.  (Modeled after PXA mmc glue; see that for usage examples.)
+ *
+ * REVISIT This is not a spi-specific notion.  Any card slot should be
+ * able to handle it.  If the MMC core doesn't adopt this kind of notion,
+ * switch the "struct device *" parameters over to "struct spi_device *".
+ */
+struct mmc_spi_platform_data {
+	/* driver activation and (optional) card detect irq hookup */
+	int (*init)(struct device *,
+		irqreturn_t (*)(int, void *),
+		void *);
+	void (*exit)(struct device *, void *);
+
+	/* sense switch on sd cards */
+	int (*get_ro)(struct device *);
+
+	/* how long to debounce card detect, in msecs */
+	u16 detect_delay;
+
+	/* power management */
+	u16 powerup_msecs;		/* delay of up to 250 msec */
+	u32 ocr_mask;			/* available voltages */
+	void (*setpower)(struct device *, unsigned int maskval);
+};
+
+#endif /* __LINUX_SPI_MMC_SPI_H */