[PATCH] mfd: SM501 core driver

This driver provides the core functionality of the SM501, which is a
multi-function chip including two framebuffers, video acceleration, USB,
and many other peripheral blocks.

The driver exports a number of entries for the peripheral drivers to use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2 files changed, 527 insertions, 0 deletions

diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h
new file mode 100644
index 00000000000..cc9be4a1186
--- /dev/null
+++ b/include/linux/sm501-regs.h
@@ -0,0 +1,357 @@
+/* sm501-regs.h
+ *
+ * Copyright 2006 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Silicon Motion SM501 register definitions
+*/
+
+/* System Configuration area */
+/* System config base */
+#define SM501_SYS_CONFIG		(0x000000)
+
+/* config 1 */
+#define SM501_SYSTEM_CONTROL 		(0x000000)
+#define SM501_MISC_CONTROL		(0x000004)
+
+#define SM501_MISC_BUS_SH		(0x0)
+#define SM501_MISC_BUS_PCI		(0x1)
+#define SM501_MISC_BUS_XSCALE		(0x2)
+#define SM501_MISC_BUS_NEC		(0x6)
+#define SM501_MISC_BUS_MASK		(0x7)
+
+#define SM501_MISC_VR_62MB		(1<<3)
+#define SM501_MISC_CDR_RESET		(1<<7)
+#define SM501_MISC_USB_LB		(1<<8)
+#define SM501_MISC_USB_SLAVE		(1<<9)
+#define SM501_MISC_BL_1			(1<<10)
+#define SM501_MISC_MC			(1<<11)
+#define SM501_MISC_DAC_POWER		(1<<12)
+#define SM501_MISC_IRQ_INVERT		(1<<16)
+#define SM501_MISC_SH			(1<<17)
+
+#define SM501_MISC_HOLD_EMPTY		(0<<18)
+#define SM501_MISC_HOLD_8		(1<<18)
+#define SM501_MISC_HOLD_16		(2<<18)
+#define SM501_MISC_HOLD_24		(3<<18)
+#define SM501_MISC_HOLD_32		(4<<18)
+#define SM501_MISC_HOLD_MASK		(7<<18)
+
+#define SM501_MISC_FREQ_12		(1<<24)
+#define SM501_MISC_PNL_24BIT		(1<<25)
+#define SM501_MISC_8051_LE		(1<<26)
+
+
+
+#define SM501_GPIO31_0_CONTROL		(0x000008)
+#define SM501_GPIO63_32_CONTROL		(0x00000C)
+#define SM501_DRAM_CONTROL		(0x000010)
+
+/* command list */
+#define SM501_ARBTRTN_CONTROL		(0x000014)
+
+/* command list */
+#define SM501_COMMAND_LIST_STATUS	(0x000024)
+
+/* interrupt debug */
+#define SM501_RAW_IRQ_STATUS		(0x000028)
+#define SM501_RAW_IRQ_CLEAR		(0x000028)
+#define SM501_IRQ_STATUS		(0x00002C)
+#define SM501_IRQ_MASK			(0x000030)
+#define SM501_DEBUG_CONTROL		(0x000034)
+
+/* power management */
+#define SM501_CURRENT_GATE		(0x000038)
+#define SM501_CURRENT_CLOCK		(0x00003C)
+#define SM501_POWER_MODE_0_GATE		(0x000040)
+#define SM501_POWER_MODE_0_CLOCK	(0x000044)
+#define SM501_POWER_MODE_1_GATE		(0x000048)
+#define SM501_POWER_MODE_1_CLOCK	(0x00004C)
+#define SM501_SLEEP_MODE_GATE		(0x000050)
+#define SM501_POWER_MODE_CONTROL	(0x000054)
+
+/* power gates for units within the 501 */
+#define SM501_GATE_HOST			(0)
+#define SM501_GATE_MEMORY		(1)
+#define SM501_GATE_DISPLAY		(2)
+#define SM501_GATE_2D_ENGINE		(3)
+#define SM501_GATE_CSC			(4)
+#define SM501_GATE_ZVPORT		(5)
+#define SM501_GATE_GPIO			(6)
+#define SM501_GATE_UART0		(7)
+#define SM501_GATE_UART1		(8)
+#define SM501_GATE_SSP			(10)
+#define SM501_GATE_USB_HOST		(11)
+#define SM501_GATE_USB_GADGET		(12)
+#define SM501_GATE_UCONTROLLER		(17)
+#define SM501_GATE_AC97			(18)
+
+/* panel clock */
+#define SM501_CLOCK_P2XCLK		(24)
+/* crt clock */
+#define SM501_CLOCK_V2XCLK		(16)
+/* main clock */
+#define SM501_CLOCK_MCLK		(8)
+/* SDRAM controller clock */
+#define SM501_CLOCK_M1XCLK		(0)
+
+/* config 2 */
+#define SM501_PCI_MASTER_BASE		(0x000058)
+#define SM501_ENDIAN_CONTROL		(0x00005C)
+#define SM501_DEVICEID			(0x000060)
+/* 0x050100A0 */
+
+#define SM501_PLLCLOCK_COUNT		(0x000064)
+#define SM501_MISC_TIMING		(0x000068)
+#define SM501_CURRENT_SDRAM_CLOCK	(0x00006C)
+
+/* GPIO base */
+#define SM501_GPIO			(0x010000)
+#define SM501_GPIO_DATA_LOW		(0x00)
+#define SM501_GPIO_DATA_HIGH		(0x04)
+#define SM501_GPIO_DDR_LOW		(0x08)
+#define SM501_GPIO_DDR_HIGH		(0x0C)
+#define SM501_GPIO_IRQ_SETUP		(0x10)
+#define SM501_GPIO_IRQ_STATUS		(0x14)
+#define SM501_GPIO_IRQ_RESET		(0x14)
+
+/* I2C controller base */
+#define SM501_I2C			(0x010040)
+#define SM501_I2C_BYTE_COUNT		(0x00)
+#define SM501_I2C_CONTROL		(0x01)
+#define SM501_I2C_STATUS		(0x02)
+#define SM501_I2C_RESET			(0x02)
+#define SM501_I2C_SLAVE_ADDRESS		(0x03)
+#define SM501_I2C_DATA			(0x04)
+
+/* SSP base */
+#define SM501_SSP			(0x020000)
+
+/* Uart 0 base */
+#define SM501_UART0			(0x030000)
+
+/* Uart 1 base */
+#define SM501_UART1			(0x030020)
+
+/* USB host port base */
+#define SM501_USB_HOST			(0x040000)
+
+/* USB slave/gadget base */
+#define SM501_USB_GADGET		(0x060000)
+
+/* USB slave/gadget data port base */
+#define SM501_USB_GADGET_DATA		(0x070000)
+
+/* Display contoller/video engine base */
+#define SM501_DC			(0x080000)
+
+/* common defines for the SM501 address registers */
+#define SM501_ADDR_FLIP			(1<<31)
+#define SM501_ADDR_EXT			(1<<27)
+#define SM501_ADDR_CS1			(1<<26)
+#define SM501_ADDR_MASK			(0x3f << 26)
+
+#define SM501_FIFO_MASK			(0x3 << 16)
+#define SM501_FIFO_1			(0x0 << 16)
+#define SM501_FIFO_3			(0x1 << 16)
+#define SM501_FIFO_7			(0x2 << 16)
+#define SM501_FIFO_11			(0x3 << 16)
+
+/* common registers for panel and the crt */
+#define SM501_OFF_DC_H_TOT		(0x000)
+#define SM501_OFF_DC_V_TOT		(0x008)
+#define SM501_OFF_DC_H_SYNC		(0x004)
+#define SM501_OFF_DC_V_SYNC		(0x00C)
+
+#define SM501_DC_PANEL_CONTROL		(0x000)
+
+#define SM501_DC_PANEL_CONTROL_FPEN	(1<<27)
+#define SM501_DC_PANEL_CONTROL_BIAS	(1<<26)
+#define SM501_DC_PANEL_CONTROL_DATA	(1<<25)
+#define SM501_DC_PANEL_CONTROL_VDD	(1<<24)
+#define SM501_DC_PANEL_CONTROL_DP	(1<<23)
+
+#define SM501_DC_PANEL_CONTROL_TFT_888	(0<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_333	(1<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_444	(2<<21)
+
+#define SM501_DC_PANEL_CONTROL_DE	(1<<20)
+
+#define SM501_DC_PANEL_CONTROL_LCD_TFT	(0<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN8	(1<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
+
+#define SM501_DC_PANEL_CONTROL_CP	(1<<14)
+#define SM501_DC_PANEL_CONTROL_VSP	(1<<13)
+#define SM501_DC_PANEL_CONTROL_HSP	(1<<12)
+#define SM501_DC_PANEL_CONTROL_CK	(1<<9)
+#define SM501_DC_PANEL_CONTROL_TE	(1<<8)
+#define SM501_DC_PANEL_CONTROL_VPD	(1<<7)
+#define SM501_DC_PANEL_CONTROL_VP	(1<<6)
+#define SM501_DC_PANEL_CONTROL_HPD	(1<<5)
+#define SM501_DC_PANEL_CONTROL_HP	(1<<4)
+#define SM501_DC_PANEL_CONTROL_GAMMA	(1<<3)
+#define SM501_DC_PANEL_CONTROL_EN	(1<<2)
+
+#define SM501_DC_PANEL_CONTROL_8BPP	(0<<0)
+#define SM501_DC_PANEL_CONTROL_16BPP	(1<<0)
+#define SM501_DC_PANEL_CONTROL_32BPP	(2<<0)
+
+
+#define SM501_DC_PANEL_PANNING_CONTROL	(0x004)
+#define SM501_DC_PANEL_COLOR_KEY	(0x008)
+#define SM501_DC_PANEL_FB_ADDR		(0x00C)
+#define SM501_DC_PANEL_FB_OFFSET	(0x010)
+#define SM501_DC_PANEL_FB_WIDTH		(0x014)
+#define SM501_DC_PANEL_FB_HEIGHT	(0x018)
+#define SM501_DC_PANEL_TL_LOC		(0x01C)
+#define SM501_DC_PANEL_BR_LOC		(0x020)
+#define SM501_DC_PANEL_H_TOT		(0x024)
+#define SM501_DC_PANEL_H_SYNC		(0x028)
+#define SM501_DC_PANEL_V_TOT		(0x02C)
+#define SM501_DC_PANEL_V_SYNC		(0x030)
+#define SM501_DC_PANEL_CUR_LINE		(0x034)
+
+#define SM501_DC_VIDEO_CONTROL		(0x040)
+#define SM501_DC_VIDEO_FB0_ADDR		(0x044)
+#define SM501_DC_VIDEO_FB_WIDTH		(0x048)
+#define SM501_DC_VIDEO_FB0_LAST_ADDR	(0x04C)
+#define SM501_DC_VIDEO_TL_LOC		(0x050)
+#define SM501_DC_VIDEO_BR_LOC		(0x054)
+#define SM501_DC_VIDEO_SCALE		(0x058)
+#define SM501_DC_VIDEO_INIT_SCALE	(0x05C)
+#define SM501_DC_VIDEO_YUV_CONSTANTS	(0x060)
+#define SM501_DC_VIDEO_FB1_ADDR		(0x064)
+#define SM501_DC_VIDEO_FB1_LAST_ADDR	(0x068)
+
+#define SM501_DC_VIDEO_ALPHA_CONTROL	(0x080)
+#define SM501_DC_VIDEO_ALPHA_FB_ADDR	(0x084)
+#define SM501_DC_VIDEO_ALPHA_FB_OFFSET	(0x088)
+#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR	(0x08C)
+#define SM501_DC_VIDEO_ALPHA_TL_LOC	(0x090)
+#define SM501_DC_VIDEO_ALPHA_BR_LOC	(0x094)
+#define SM501_DC_VIDEO_ALPHA_SCALE	(0x098)
+#define SM501_DC_VIDEO_ALPHA_INIT_SCALE	(0x09C)
+#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY	(0x0A0)
+#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP	(0x0A4)
+
+#define SM501_DC_PANEL_HWC_BASE		(0x0F0)
+#define SM501_DC_PANEL_HWC_ADDR		(0x0F0)
+#define SM501_DC_PANEL_HWC_LOC		(0x0F4)
+#define SM501_DC_PANEL_HWC_COLOR_1_2	(0x0F8)
+#define SM501_DC_PANEL_HWC_COLOR_3	(0x0FC)
+
+#define SM501_HWC_EN			(1<<31)
+
+#define SM501_OFF_HWC_ADDR		(0x00)
+#define SM501_OFF_HWC_LOC		(0x04)
+#define SM501_OFF_HWC_COLOR_1_2		(0x08)
+#define SM501_OFF_HWC_COLOR_3		(0x0C)
+
+#define SM501_DC_ALPHA_CONTROL		(0x100)
+#define SM501_DC_ALPHA_FB_ADDR		(0x104)
+#define SM501_DC_ALPHA_FB_OFFSET	(0x108)
+#define SM501_DC_ALPHA_TL_LOC		(0x10C)
+#define SM501_DC_ALPHA_BR_LOC		(0x110)
+#define SM501_DC_ALPHA_CHROMA_KEY	(0x114)
+#define SM501_DC_ALPHA_COLOR_LOOKUP	(0x118)
+
+#define SM501_DC_CRT_CONTROL		(0x200)
+
+#define SM501_DC_CRT_CONTROL_TVP	(1<<15)
+#define SM501_DC_CRT_CONTROL_CP		(1<<14)
+#define SM501_DC_CRT_CONTROL_VSP	(1<<13)
+#define SM501_DC_CRT_CONTROL_HSP	(1<<12)
+#define SM501_DC_CRT_CONTROL_VS		(1<<11)
+#define SM501_DC_CRT_CONTROL_BLANK	(1<<10)
+#define SM501_DC_CRT_CONTROL_SEL	(1<<9)
+#define SM501_DC_CRT_CONTROL_TE		(1<<8)
+#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
+#define SM501_DC_CRT_CONTROL_GAMMA	(1<<3)
+#define SM501_DC_CRT_CONTROL_ENABLE	(1<<2)
+
+#define SM501_DC_CRT_CONTROL_8BPP	(0<<0)
+#define SM501_DC_CRT_CONTROL_16BPP	(1<<0)
+#define SM501_DC_CRT_CONTROL_32BPP	(2<<0)
+
+#define SM501_DC_CRT_FB_ADDR		(0x204)
+#define SM501_DC_CRT_FB_OFFSET		(0x208)
+#define SM501_DC_CRT_H_TOT		(0x20C)
+#define SM501_DC_CRT_H_SYNC		(0x210)
+#define SM501_DC_CRT_V_TOT		(0x214)
+#define SM501_DC_CRT_V_SYNC		(0x218)
+#define SM501_DC_CRT_SIGNATURE_ANALYZER	(0x21C)
+#define SM501_DC_CRT_CUR_LINE		(0x220)
+#define SM501_DC_CRT_MONITOR_DETECT	(0x224)
+
+#define SM501_DC_CRT_HWC_BASE		(0x230)
+#define SM501_DC_CRT_HWC_ADDR		(0x230)
+#define SM501_DC_CRT_HWC_LOC		(0x234)
+#define SM501_DC_CRT_HWC_COLOR_1_2	(0x238)
+#define SM501_DC_CRT_HWC_COLOR_3	(0x23C)
+
+#define SM501_DC_PANEL_PALETTE		(0x400)
+
+#define SM501_DC_VIDEO_PALETTE		(0x800)
+
+#define SM501_DC_CRT_PALETTE		(0xC00)
+
+/* Zoom Video port base */
+#define SM501_ZVPORT			(0x090000)
+
+/* AC97/I2S base */
+#define SM501_AC97			(0x0A0000)
+
+/* 8051 micro controller base */
+#define SM501_UCONTROLLER		(0x0B0000)
+
+/* 8051 micro controller SRAM base */
+#define SM501_UCONTROLLER_SRAM		(0x0C0000)
+
+/* DMA base */
+#define SM501_DMA			(0x0D0000)
+
+/* 2d engine base */
+#define SM501_2D_ENGINE			(0x100000)
+#define SM501_2D_SOURCE			(0x00)
+#define SM501_2D_DESTINATION		(0x04)
+#define SM501_2D_DIMENSION		(0x08)
+#define SM501_2D_CONTROL		(0x0C)
+#define SM501_2D_PITCH			(0x10)
+#define SM501_2D_FOREGROUND		(0x14)
+#define SM501_2D_BACKGROUND		(0x18)
+#define SM501_2D_STRETCH		(0x1C)
+#define SM501_2D_COLOR_COMPARE		(0x20)
+#define SM501_2D_COLOR_COMPARE_MASK 	(0x24)
+#define SM501_2D_MASK			(0x28)
+#define SM501_2D_CLIP_TL		(0x2C)
+#define SM501_2D_CLIP_BR		(0x30)
+#define SM501_2D_MONO_PATTERN_LOW	(0x34)
+#define SM501_2D_MONO_PATTERN_HIGH	(0x38)
+#define SM501_2D_WINDOW_WIDTH		(0x3C)
+#define SM501_2D_SOURCE_BASE		(0x40)
+#define SM501_2D_DESTINATION_BASE	(0x44)
+#define SM501_2D_ALPHA			(0x48)
+#define SM501_2D_WRAP			(0x4C)
+#define SM501_2D_STATUS			(0x50)
+
+#define SM501_CSC_Y_SOURCE_BASE		(0xC8)
+#define SM501_CSC_CONSTANTS		(0xCC)
+#define SM501_CSC_Y_SOURCE_X		(0xD0)
+#define SM501_CSC_Y_SOURCE_Y		(0xD4)
+#define SM501_CSC_U_SOURCE_BASE		(0xD8)
+#define SM501_CSC_V_SOURCE_BASE		(0xDC)
+#define SM501_CSC_SOURCE_DIMENSION	(0xE0)
+#define SM501_CSC_SOURCE_PITCH		(0xE4)
+#define SM501_CSC_DESTINATION		(0xE8)
+#define SM501_CSC_DESTINATION_DIMENSION	(0xEC)
+#define SM501_CSC_DESTINATION_PITCH	(0xF0)
+#define SM501_CSC_SCALE_FACTOR		(0xF4)
+#define SM501_CSC_DESTINATION_BASE	(0xF8)
+#define SM501_CSC_CONTROL		(0xFC)
+
+/* 2d engine data port base */
+#define SM501_2D_ENGINE_DATA		(0x110000)
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
new file mode 100644
index 00000000000..9e3aaad6fe4
--- /dev/null
+++ b/include/linux/sm501.h
@@ -0,0 +1,170 @@
+/* include/linux/sm501.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+extern int sm501_unit_power(struct device *dev,
+			    unsigned int unit, unsigned int to);
+
+extern unsigned long sm501_set_clock(struct device *dev,
+				     int clksrc, unsigned long freq);
+
+extern unsigned long sm501_find_clock(int clksrc, unsigned long req_freq);
+
+/* sm501_misc_control
+ *
+ * Modify the SM501's MISC_CONTROL register
+*/
+
+extern int sm501_misc_control(struct device *dev,
+			      unsigned long set, unsigned long clear);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+extern unsigned long sm501_modify_reg(struct device *dev,
+				      unsigned long reg,
+				      unsigned long set,
+				      unsigned long clear);
+
+/* sm501_gpio_set
+ *
+ * set the state of the given GPIO line
+*/
+
+extern void sm501_gpio_set(struct device *dev,
+			   unsigned long gpio,
+			   unsigned int to,
+			   unsigned int dir);
+
+/* sm501_gpio_get
+ *
+ * get the state of the given GPIO line
+*/
+
+extern unsigned long sm501_gpio_get(struct device *dev,
+				    unsigned long gpio);
+
+
+/* Platform data definitions */
+
+#define SM501FB_FLAG_USE_INIT_MODE	(1<<0)
+#define SM501FB_FLAG_DISABLE_AT_EXIT	(1<<1)
+#define SM501FB_FLAG_USE_HWCURSOR	(1<<2)
+#define SM501FB_FLAG_USE_HWACCEL	(1<<3)
+
+struct sm501_platdata_fbsub {
+	struct fb_videomode	*def_mode;
+	unsigned int		 def_bpp;
+	unsigned long		 max_mem;
+	unsigned int		 flags;
+};
+
+enum sm501_fb_routing {
+	SM501_FB_OWN		= 0,	/* CRT=>CRT, Panel=>Panel */
+	SM501_FB_CRT_PANEL	= 1,	/* Panel=>CRT, Panel=>Panel */
+};
+
+/* sm501_platdata_fb flag field bit definitions */
+
+#define SM501_FBPD_SWAP_FB_ENDIAN	(1<<0)	/* need to endian swap */
+
+/* sm501_platdata_fb
+ *
+ * configuration data for the framebuffer driver
+*/
+
+struct sm501_platdata_fb {
+	enum sm501_fb_routing		 fb_route;
+	unsigned int			 flags;
+	struct sm501_platdata_fbsub	*fb_crt;
+	struct sm501_platdata_fbsub	*fb_pnl;
+};
+
+/* gpio i2c */
+
+struct sm501_platdata_gpio_i2c {
+	unsigned int		pin_sda;
+	unsigned int		pin_scl;
+};
+
+/* sm501_initdata
+ *
+ * use for initialising values that may not have been setup
+ * before the driver is loaded.
+*/
+
+struct sm501_reg_init {
+	unsigned long		set;
+	unsigned long		mask;
+};
+
+#define SM501_USE_USB_HOST	(1<<0)
+#define SM501_USE_USB_SLAVE	(1<<1)
+#define SM501_USE_SSP0		(1<<2)
+#define SM501_USE_SSP1		(1<<3)
+#define SM501_USE_UART0		(1<<4)
+#define SM501_USE_UART1		(1<<5)
+#define SM501_USE_FBACCEL	(1<<6)
+#define SM501_USE_AC97		(1<<7)
+#define SM501_USE_I2S		(1<<8)
+
+#define SM501_USE_ALL		(0xffffffff)
+
+struct sm501_initdata {
+	struct sm501_reg_init	gpio_low;
+	struct sm501_reg_init	gpio_high;
+	struct sm501_reg_init	misc_timing;
+	struct sm501_reg_init	misc_control;
+
+	unsigned long		devices;
+	unsigned long		mclk;		/* non-zero to modify */
+	unsigned long		m1xclk;		/* non-zero to modify */
+};
+
+/* sm501_init_gpio
+ *
+ * default gpio settings
+*/
+
+struct sm501_init_gpio {
+	struct sm501_reg_init	gpio_data_low;
+	struct sm501_reg_init	gpio_data_high;
+	struct sm501_reg_init	gpio_ddr_low;
+	struct sm501_reg_init	gpio_ddr_high;
+};
+
+/* sm501_platdata
+ *
+ * This is passed with the platform device to allow the board
+ * to control the behaviour of the SM501 driver(s) which attach
+ * to the device.
+ *
+*/
+
+struct sm501_platdata {
+	struct sm501_initdata		*init;
+	struct sm501_init_gpio		*init_gpiop;
+	struct sm501_platdata_fb	*fb;
+
+	struct sm501_platdata_gpio_i2c	*gpio_i2c;
+	unsigned int			 gpio_i2c_nr;
+};