[SPARC]: Merge asm-sparc{,64}/bpp.h

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 2 insertions, 74 deletions

diff --git a/include/asm-sparc/bpp.h b/include/asm-sparc/bpp.h
index 3578ac113cf..31f515e499a 100644
--- a/include/asm-sparc/bpp.h
+++ b/include/asm-sparc/bpp.h
@@ -17,7 +17,7 @@
  * with compliant or compatible devices. It will use whatever features
  * the device supports, prefering those that are typically faster.
  *
- * When the device is opened, it is left in COMPATABILITY mode, and
+ * When the device is opened, it is left in COMPATIBILITY mode, and
  * writes work like any printer device. The driver only attempt to
  * negotiate 1284 modes when needed so that plugs can be pulled,
  * switch boxes switched, etc., without disrupting things. It will
diff --git a/include/asm-sparc64/bpp.h b/include/asm-sparc64/bpp.h
index abe163a5038..514eee20272 100644
--- a/include/asm-sparc64/bpp.h
+++ b/include/asm-sparc64/bpp.h
@@ -1,73 +1 @@
-#ifndef _SPARC64_BPP_H
-#define _SPARC64_BPP_H
-
-/*
- * Copyright (c) 1995 Picture Elements
- *	Stephen Williams
- *	Gus Baldauf
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-#include  <linux/ioctl.h>
-
-/*
- * This is a driver that supports IEEE Std 1284-1994 communications
- * with compliant or compatible devices. It will use whatever features
- * the device supports, prefering those that are typically faster.
- *
- * When the device is opened, it is left in COMPATIBILITY mode, and
- * writes work like any printer device. The driver only attempt to
- * negotiate 1284 modes when needed so that plugs can be pulled,
- * switch boxes switched, etc., without disrupting things. It will
- * also leave the device in compatibility mode when closed.
- */
-
-
-
-/*
- * This driver also supplies ioctls to manually manipulate the
- * pins. This is great for testing devices, or writing code to deal
- * with bizzarro-mode of the ACME Special TurboThingy Plus.
- *
- * NOTE: These ioctl currently do not interact well with
- * read/write. Caveat emptor.
- *
- * PUT_PINS allows us to assign the sense of all the pins, including
- * the data pins if being driven by the host. The GET_PINS returns the
- * pins that the peripheral drives, including data if appropriate.
- */
-
-# define BPP_PUT_PINS _IOW('B', 1, int)
-# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
-# define BPP_PUT_DATA _IOW('B', 3, int)
-# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
-
-/*
- * Set the data bus to input mode. Disengage the data bin driver and
- * be prepared to read values from the peripheral. If the arg is 0,
- * then revert the bus to output mode.
- */
-# define BPP_SET_INPUT _IOW('B', 5, int)
-
-/*
- * These bits apply to the PUT operation...
- */
-# define BPP_PP_nStrobe   0x0001
-# define BPP_PP_nAutoFd   0x0002
-# define BPP_PP_nInit     0x0004
-# define BPP_PP_nSelectIn 0x0008
-
-/*
- * These apply to the GET operation, which also reads the current value
- * of the previously put values. A bit mask of these will be returned
- * as a bit mask in the return code of the ioctl().
- */
-# define BPP_GP_nAck   0x0100
-# define BPP_GP_Busy   0x0200
-# define BPP_GP_PError 0x0400
-# define BPP_GP_Select 0x0800
-# define BPP_GP_nFault 0x1000
-
-#endif
+#include <asm-sparc/bpp.h>