diff options
author | Linus Torvalds <torvalds@g5.osdl.org> | 2005-10-28 09:05:25 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2005-10-28 09:05:25 -0700 |
commit | e5dfa9282f3db461a896a6692b529e1823ba98c6 (patch) | |
tree | 574d23cebc57c657373b0e1b6692c047aba8dd6e /include | |
parent | 5dd962494f76fb3ef1196cd420b5d6260d7a3766 (diff) | |
parent | b2ab040db85835e54c7559533df7f85902617926 (diff) |
Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
Diffstat (limited to 'include')
-rw-r--r-- | include/asm-mips/sgi/hpc3.h | 40 | ||||
-rw-r--r-- | include/linux/cyclomx.h | 2 | ||||
-rw-r--r-- | include/linux/cycx_drv.h | 1 | ||||
-rw-r--r-- | include/linux/ibmtr.h | 4 | ||||
-rw-r--r-- | include/linux/if_arp.h | 1 | ||||
-rw-r--r-- | include/linux/mii.h | 1 | ||||
-rw-r--r-- | include/linux/netdevice.h | 6 | ||||
-rw-r--r-- | include/linux/sdladrv.h | 4 | ||||
-rw-r--r-- | include/linux/wanpipe.h | 9 | ||||
-rw-r--r-- | include/net/ieee80211.h | 525 | ||||
-rw-r--r-- | include/net/ieee80211_crypt.h | 38 | ||||
-rw-r--r-- | include/net/ieee80211_radiotap.h | 231 | ||||
-rw-r--r-- | include/net/syncppp.h | 1 |
13 files changed, 684 insertions, 179 deletions
diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h index ac3dfc7af5b..fcec52bafb2 100644 --- a/include/asm-mips/sgi/hpc3.h +++ b/include/asm-mips/sgi/hpc3.h @@ -128,26 +128,26 @@ struct hpc3_ethregs { volatile u32 rx_gfptr; /* current GIO fifo ptr */ volatile u32 rx_dfptr; /* current device fifo ptr */ u32 _unused1; /* padding */ - volatile u32 rx_reset; /* reset register */ -#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */ -#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */ -#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ - - volatile u32 rx_dconfig; /* DMA configuration register */ -#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ -#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ -#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ -#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ -#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ -#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ -#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ -#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */ - - volatile u32 rx_pconfig; /* PIO configuration register */ -#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ -#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ -#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ -#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ + volatile u32 reset; /* reset register */ +#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */ +#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */ +#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */ + + volatile u32 dconfig; /* DMA configuration register */ +#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */ +#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */ +#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */ +#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */ +#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */ +#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */ +#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */ +#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */ + + volatile u32 pconfig; /* PIO configuration register */ +#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */ +#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */ +#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */ +#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */ u32 _unused2[0x1000/4 - 8]; /* padding */ diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h index 04fa7dff079..300d704bdb9 100644 --- a/include/linux/cyclomx.h +++ b/include/linux/cyclomx.h @@ -37,8 +37,6 @@ #include <linux/cycx_x25.h> #endif -#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0) - /* Adapter Data Space. * This structure is needed because we handle multiple cards, otherwise * static data would do it. diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h index 6621df86a74..12fe6b0bfcf 100644 --- a/include/linux/cycx_drv.h +++ b/include/linux/cycx_drv.h @@ -60,6 +60,5 @@ extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len); extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len); extern int cycx_exec(void __iomem *addr); -extern void cycx_inten(struct cycx_hw *hw); extern void cycx_intr(struct cycx_hw *hw); #endif /* _CYCX_DRV_H */ diff --git a/include/linux/ibmtr.h b/include/linux/ibmtr.h index 2ef0b21517f..1c7a0dd5536 100644 --- a/include/linux/ibmtr.h +++ b/include/linux/ibmtr.h @@ -7,8 +7,8 @@ /* ported to the Alpha architecture 02/20/96 (just used the HZ macro) */ #define TR_RETRY_INTERVAL (30*HZ) /* 500 on PC = 5 s */ -#define TR_RST_TIME (HZ/20) /* 5 on PC = 50 ms */ -#define TR_BUSY_INTERVAL (HZ/5) /* 5 on PC = 200 ms */ +#define TR_RST_TIME (msecs_to_jiffies(50)) /* 5 on PC = 50 ms */ +#define TR_BUSY_INTERVAL (msecs_to_jiffies(200)) /* 5 on PC = 200 ms */ #define TR_SPIN_INTERVAL (3*HZ) /* 3 seconds before init timeout */ #define TR_ISA 1 diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 0856548a2a0..a8b1a207183 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -84,6 +84,7 @@ #define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ #define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ +#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ #define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ #define ARPHRD_NONE 0xFFFE /* zero header length */ diff --git a/include/linux/mii.h b/include/linux/mii.h index 9b8d0476988..68f5a0f392d 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -158,6 +158,7 @@ extern int mii_link_ok (struct mii_if_info *mii); extern int mii_nway_restart (struct mii_if_info *mii); extern int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); extern int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd); +extern int mii_check_gmii_support(struct mii_if_info *mii); extern void mii_check_link (struct mii_if_info *mii); extern unsigned int mii_check_media (struct mii_if_info *mii, unsigned int ok_to_print, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 368e4c825ff..a9281b24c40 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -873,11 +873,9 @@ static inline void netif_rx_complete(struct net_device *dev) static inline void netif_poll_disable(struct net_device *dev) { - while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) { + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) /* No hurry. */ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(1); - } + schedule_timeout_interruptible(1); } static inline void netif_poll_enable(struct net_device *dev) diff --git a/include/linux/sdladrv.h b/include/linux/sdladrv.h index 78f634007fc..c85e103d5e7 100644 --- a/include/linux/sdladrv.h +++ b/include/linux/sdladrv.h @@ -52,12 +52,8 @@ typedef struct sdlahw extern int sdla_setup (sdlahw_t* hw, void* sfm, unsigned len); extern int sdla_down (sdlahw_t* hw); -extern int sdla_inten (sdlahw_t* hw); -extern int sdla_intde (sdlahw_t* hw); -extern int sdla_intack (sdlahw_t* hw); extern void S514_intack (sdlahw_t* hw, u32 int_status); extern void read_S514_int_stat (sdlahw_t* hw, u32* int_status); -extern int sdla_intr (sdlahw_t* hw); extern int sdla_mapmem (sdlahw_t* hw, unsigned long addr); extern int sdla_peek (sdlahw_t* hw, unsigned long addr, void* buf, unsigned len); diff --git a/include/linux/wanpipe.h b/include/linux/wanpipe.h index 167d956c492..dae9860091d 100644 --- a/include/linux/wanpipe.h +++ b/include/linux/wanpipe.h @@ -265,15 +265,6 @@ typedef struct { #include <linux/tty_driver.h> #include <linux/tty_flip.h> - -#define is_digit(ch) (((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')?1:0) -#define is_alpha(ch) ((((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'z')||\ - ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'Z'))?1:0) -#define is_hex_digit(ch) ((((ch)>=(unsigned)'0'&&(ch)<=(unsigned)'9')||\ - ((ch)>=(unsigned)'a'&&(ch)<=(unsigned)'f')||\ - ((ch)>=(unsigned)'A'&&(ch)<=(unsigned)'F'))?1:0) - - /****** Data Structures *****************************************************/ /* Adapter Data Space. diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index dc36b1be674..5e38dca1d08 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -11,19 +11,26 @@ * * Adaption to a generic IEEE 802.11 stack by James Ketrenos * <jketreno@linux.intel.com> - * Copyright (c) 2004, Intel Corporation + * Copyright (c) 2004-2005, Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. See README and COPYING for * more details. + * + * API Version History + * 1.0.x -- Initial version + * 1.1.x -- Added radiotap, QoS, TIM, ieee80211_geo APIs, + * various structure changes, and crypto API init method */ #ifndef IEEE80211_H #define IEEE80211_H -#include <linux/if_ether.h> /* ETH_ALEN */ -#include <linux/kernel.h> /* ARRAY_SIZE */ +#include <linux/if_ether.h> /* ETH_ALEN */ +#include <linux/kernel.h> /* ARRAY_SIZE */ #include <linux/wireless.h> +#define IEEE80211_VERSION "git-1.1.6" + #define IEEE80211_DATA_LEN 2304 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section 6.2.1.1.2. @@ -33,34 +40,13 @@ represents the 2304 bytes of real data, plus a possible 8 bytes of WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ - -#define IEEE80211_HLEN 30 -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) - -struct ieee80211_hdr { - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; - u8 addr4[ETH_ALEN]; -} __attribute__ ((packed)); - -struct ieee80211_hdr_3addr { - __le16 frame_ctl; - __le16 duration_id; - u8 addr1[ETH_ALEN]; - u8 addr2[ETH_ALEN]; - u8 addr3[ETH_ALEN]; - __le16 seq_ctl; -} __attribute__ ((packed)); - #define IEEE80211_1ADDR_LEN 10 #define IEEE80211_2ADDR_LEN 16 #define IEEE80211_3ADDR_LEN 24 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_FCS_LEN 4 +#define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) +#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) #define MIN_FRAG_THRESHOLD 256U #define MAX_FRAG_THRESHOLD 2346U @@ -113,11 +99,11 @@ struct ieee80211_hdr_3addr { #define IEEE80211_STYPE_CFACK 0x0050 #define IEEE80211_STYPE_CFPOLL 0x0060 #define IEEE80211_STYPE_CFACKPOLL 0x0070 +#define IEEE80211_STYPE_QOS_DATA 0x0080 #define IEEE80211_SCTL_FRAG 0x000F #define IEEE80211_SCTL_SEQ 0xFFF0 - /* debug macros */ #ifdef CONFIG_IEEE80211_DEBUG @@ -128,8 +114,7 @@ do { if (ieee80211_debug_level & (level)) \ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) #else #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) -#endif /* CONFIG_IEEE80211_DEBUG */ - +#endif /* CONFIG_IEEE80211_DEBUG */ /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */ @@ -140,7 +125,6 @@ do { if (ieee80211_debug_level & (level)) \ * messages. It should never be used for passing essid to user space. */ const char *escape_essid(const char *essid, u8 essid_len); - /* * To use the debug system: * @@ -177,6 +161,7 @@ const char *escape_essid(const char *essid, u8 essid_len); #define IEEE80211_DL_TX (1<<8) #define IEEE80211_DL_RX (1<<9) +#define IEEE80211_DL_QOS (1<<31) #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) @@ -190,9 +175,10 @@ const char *escape_essid(const char *essid, u8 essid_len); #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) +#define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a) #include <linux/netdevice.h> #include <linux/wireless.h> -#include <linux/if_arp.h> /* ARPHRD_ETHER */ +#include <linux/if_arp.h> /* ARPHRD_ETHER */ #ifndef WIRELESS_SPY #define WIRELESS_SPY /* enable iwspy support */ @@ -200,10 +186,10 @@ const char *escape_essid(const char *essid, u8 essid_len); #include <net/iw_handler.h> /* new driver API */ #ifndef ETH_P_PAE -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#endif /* ETH_P_PAE */ +#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ +#endif /* ETH_P_PAE */ -#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ +#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ #ifndef ETH_P_80211_RAW #define ETH_P_80211_RAW (ETH_P_ECONET + 1) @@ -215,10 +201,10 @@ const char *escape_essid(const char *essid, u8 essid_len); struct ieee80211_snap_hdr { - u8 dsap; /* always 0xAA */ - u8 ssap; /* always 0xAA */ - u8 ctrl; /* always 0x03 */ - u8 oui[P80211_OUI_LEN]; /* organizational universal id */ + u8 dsap; /* always 0xAA */ + u8 ssap; /* always 0xAA */ + u8 ctrl; /* always 0x03 */ + u8 oui[P80211_OUI_LEN]; /* organizational universal id */ } __attribute__ ((packed)); @@ -246,8 +232,9 @@ struct ieee80211_snap_hdr { #define WLAN_CAPABILITY_PBCC (1<<6) #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7) #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) +#define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) -#define WLAN_CAPABILITY_OSSS_OFDM (1<<13) +#define WLAN_CAPABILITY_DSSS_OFDM (1<<13) /* Status codes */ enum ieee80211_statuscode { @@ -312,14 +299,12 @@ enum ieee80211_reasoncode { WLAN_REASON_CIPHER_SUITE_REJECTED = 24, }; - #define IEEE80211_STATMASK_SIGNAL (1<<0) #define IEEE80211_STATMASK_RSSI (1<<1) #define IEEE80211_STATMASK_NOISE (1<<2) #define IEEE80211_STATMASK_RATE (1<<3) #define IEEE80211_STATMASK_WEMASK 0x7 - #define IEEE80211_CCK_MODULATION (1<<0) #define IEEE80211_OFDM_MODULATION (1<<1) @@ -377,9 +362,6 @@ enum ieee80211_reasoncode { #define IEEE80211_NUM_CCK_RATES 4 #define IEEE80211_OFDM_SHIFT_MASK_A 4 - - - /* NOTE: This data is for statistical purposes; not all hardware provides this * information for frames received. Not setting these will not cause * any adverse affects. */ @@ -388,7 +370,7 @@ struct ieee80211_rx_stats { s8 rssi; u8 signal; u8 noise; - u16 rate; /* in 100 kbps */ + u16 rate; /* in 100 kbps */ u8 received_channel; u8 control; u8 mask; @@ -439,38 +421,44 @@ struct ieee80211_device; #include "ieee80211_crypt.h" -#define SEC_KEY_1 (1<<0) -#define SEC_KEY_2 (1<<1) -#define SEC_KEY_3 (1<<2) -#define SEC_KEY_4 (1<<3) -#define SEC_ACTIVE_KEY (1<<4) -#define SEC_AUTH_MODE (1<<5) -#define SEC_UNICAST_GROUP (1<<6) -#define SEC_LEVEL (1<<7) -#define SEC_ENABLED (1<<8) - -#define SEC_LEVEL_0 0 /* None */ -#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ -#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ -#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ -#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ - -#define WEP_KEYS 4 -#define WEP_KEY_LEN 13 +#define SEC_KEY_1 (1<<0) +#define SEC_KEY_2 (1<<1) +#define SEC_KEY_3 (1<<2) +#define SEC_KEY_4 (1<<3) +#define SEC_ACTIVE_KEY (1<<4) +#define SEC_AUTH_MODE (1<<5) +#define SEC_UNICAST_GROUP (1<<6) +#define SEC_LEVEL (1<<7) +#define SEC_ENABLED (1<<8) +#define SEC_ENCRYPT (1<<9) + +#define SEC_LEVEL_0 0 /* None */ +#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ +#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ +#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ +#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ + +#define SEC_ALG_NONE 0 +#define SEC_ALG_WEP 1 +#define SEC_ALG_TKIP 2 +#define SEC_ALG_CCMP 3 + +#define WEP_KEYS 4 +#define WEP_KEY_LEN 13 +#define SCM_KEY_LEN 32 +#define SCM_TEMPORAL_KEY_LENGTH 16 struct ieee80211_security { u16 active_key:2, - enabled:1, - auth_mode:2, - auth_algo:4, - unicast_uses_group:1; + enabled:1, + auth_mode:2, auth_algo:4, unicast_uses_group:1, encrypt:1; + u8 encode_alg[WEP_KEYS]; u8 key_sizes[WEP_KEYS]; - u8 keys[WEP_KEYS][WEP_KEY_LEN]; + u8 keys[WEP_KEYS][SCM_KEY_LEN]; u8 level; u16 flags; } __attribute__ ((packed)); - /* 802.11 data frame from AP @@ -494,7 +482,7 @@ enum ieee80211_mfie { MFIE_TYPE_RATES = 1, MFIE_TYPE_FH_SET = 2, MFIE_TYPE_DS_SET = 3, - MFIE_TYPE_CF_SET = 4, + MFIE_TYPE_CF_SET = 4, MFIE_TYPE_TIM = 5, MFIE_TYPE_IBSS_SET = 6, MFIE_TYPE_COUNTRY = 7, @@ -516,11 +504,75 @@ enum ieee80211_mfie { MFIE_TYPE_RSN = 48, MFIE_TYPE_RATES_EX = 50, MFIE_TYPE_GENERIC = 221, + MFIE_TYPE_QOS_PARAMETER = 222, }; -struct ieee80211_info_element_hdr { - u8 id; - u8 len; +/* Minimal header; can be used for passing 802.11 frames with sufficient + * information to determine what type of underlying data type is actually + * stored in the data. */ +struct ieee80211_hdr { + __le16 frame_ctl; + __le16 duration_id; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_1addr { + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_2addr { + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addr { + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_4addr { + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 addr4[ETH_ALEN]; + u8 payload[0]; +} __attribute__ ((packed)); + +struct ieee80211_hdr_3addrqos { + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 payload[0]; + __le16 qos_ctl; +} __attribute__ ((packed)); + +struct ieee80211_hdr_4addrqos { + __le16 frame_ctl; + __le16 duration_id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; + u8 addr3[ETH_ALEN]; + __le16 seq_ctl; + u8 addr4[ETH_ALEN]; + u8 payload[0]; + __le16 qos_ctl; } __attribute__ ((packed)); struct ieee80211_info_element { @@ -546,49 +598,77 @@ struct ieee80211_info_element { u16 status; */ -struct ieee80211_authentication { +struct ieee80211_auth { struct ieee80211_hdr_3addr header; __le16 algorithm; __le16 transaction; __le16 status; - struct ieee80211_info_element info_element; + /* challenge */ + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); +struct ieee80211_disassoc { + struct ieee80211_hdr_3addr header; + __le16 reason; +} __attribute__ ((packed)); + +/* Alias deauth for disassoc */ +#define ieee80211_deauth ieee80211_disassoc + +struct ieee80211_probe_request { + struct ieee80211_hdr_3addr header; + /* SSID, supported rates */ + struct ieee80211_info_element info_element[0]; +} __attribute__ ((packed)); struct ieee80211_probe_response { struct ieee80211_hdr_3addr header; u32 time_stamp[2]; __le16 beacon_interval; __le16 capability; - struct ieee80211_info_element info_element; + /* SSID, supported rates, FH params, DS params, + * CF params, IBSS params, TIM (if beacon), RSN */ + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); -struct ieee80211_assoc_request_frame { +/* Alias beacon for probe_response */ +#define ieee80211_beacon ieee80211_probe_response + +struct ieee80211_assoc_request { + struct ieee80211_hdr_3addr header; + __le16 capability; + __le16 listen_interval; + /* SSID, supported rates, RSN */ + struct ieee80211_info_element info_element[0]; +} __attribute__ ((packed)); + +struct ieee80211_reassoc_request { + struct ieee80211_hdr_3addr header; __le16 capability; __le16 listen_interval; u8 current_ap[ETH_ALEN]; - struct ieee80211_info_element info_element; + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); -struct ieee80211_assoc_response_frame { +struct ieee80211_assoc_response { struct ieee80211_hdr_3addr header; __le16 capability; __le16 status; __le16 aid; - struct ieee80211_info_element info_element; /* supported rates */ + /* supported rates */ + struct ieee80211_info_element info_element[0]; } __attribute__ ((packed)); - struct ieee80211_txb { u8 nr_frags; u8 encrypted; - u16 reserved; - u16 frag_size; - u16 payload_size; + u8 rts_included; + u8 reserved; + __le16 frag_size; + __le16 payload_size; struct sk_buff *fragments[0]; }; - /* SWEEP TABLE ENTRIES NUMBER */ #define MAX_SWEEP_TAB_ENTRIES 42 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7 @@ -604,9 +684,68 @@ struct ieee80211_txb { #define MAX_WPA_IE_LEN 64 -#define NETWORK_EMPTY_ESSID (1<<0) -#define NETWORK_HAS_OFDM (1<<1) -#define NETWORK_HAS_CCK (1<<2) +#define NETWORK_EMPTY_ESSID (1<<0) +#define NETWORK_HAS_OFDM (1<<1) +#define NETWORK_HAS_CCK (1<<2) + +/* QoS structure */ +#define NETWORK_HAS_QOS_PARAMETERS (1<<3) +#define NETWORK_HAS_QOS_INFORMATION (1<<4) +#define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | NETWORK_HAS_QOS_INFORMATION) + +#define QOS_QUEUE_NUM 4 +#define QOS_OUI_LEN 3 +#define QOS_OUI_TYPE 2 +#define QOS_ELEMENT_ID 221 +#define QOS_OUI_INFO_SUB_TYPE 0 +#define QOS_OUI_PARAM_SUB_TYPE 1 +#define QOS_VERSION_1 1 +#define QOS_AIFSN_MIN_VALUE 2 + +struct ieee80211_qos_information_element { + u8 elementID; + u8 length; + u8 qui[QOS_OUI_LEN]; + u8 qui_type; + u8 qui_subtype; + u8 version; + u8 ac_info; +} __attribute__ ((packed)); + +struct ieee80211_qos_ac_parameter { + u8 aci_aifsn; + u8 ecw_min_max; + __le16 tx_op_limit; +} __attribute__ ((packed)); + +struct ieee80211_qos_parameter_info { + struct ieee80211_qos_information_element info_element; + u8 reserved; + struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM]; +} __attribute__ ((packed)); + +struct ieee80211_qos_parameters { + __le16 cw_min[QOS_QUEUE_NUM]; + __le16 cw_max[QOS_QUEUE_NUM]; + u8 aifs[QOS_QUEUE_NUM]; + u8 flag[QOS_QUEUE_NUM]; + __le16 tx_op_limit[QOS_QUEUE_NUM]; +} __attribute__ ((packed)); + +struct ieee80211_qos_data { + struct ieee80211_qos_parameters parameters; + int active; + int supported; + u8 param_count; + u8 old_param_count; +}; + +struct ieee80211_tim_parameters { + u8 tim_count; + u8 tim_period; +} __attribute__ ((packed)); + +/*******************************************************/ struct ieee80211_network { /* These entries are used to identify a unique network */ @@ -616,6 +755,8 @@ struct ieee80211_network { u8 ssid[IW_ESSID_MAX_SIZE + 1]; u8 ssid_len; + struct ieee80211_qos_data qos_data; + /* These are network statistics */ struct ieee80211_rx_stats stats; u16 capability; @@ -631,10 +772,12 @@ struct ieee80211_network { u16 beacon_interval; u16 listen_interval; u16 atim_window; + u8 erp_value; u8 wpa_ie[MAX_WPA_IE_LEN]; size_t wpa_ie_len; u8 rsn_ie[MAX_WPA_IE_LEN]; size_t rsn_ie_len; + struct ieee80211_tim_parameters tim; struct list_head list; }; @@ -651,17 +794,52 @@ enum ieee80211_state { #define DEFAULT_MAX_SCAN_AGE (15 * HZ) #define DEFAULT_FTS 2346 - #define CFG_IEEE80211_RESERVE_FCS (1<<0) #define CFG_IEEE80211_COMPUTE_FCS (1<<1) +#define CFG_IEEE80211_RTS (1<<2) + +#define IEEE80211_24GHZ_MIN_CHANNEL 1 +#define IEEE80211_24GHZ_MAX_CHANNEL 14 +#define IEEE80211_24GHZ_CHANNELS 14 + +#define IEEE80211_52GHZ_MIN_CHANNEL 36 +#define IEEE80211_52GHZ_MAX_CHANNEL 165 +#define IEEE80211_52GHZ_CHANNELS 32 + +enum { + IEEE80211_CH_PASSIVE_ONLY = (1 << 0), + IEEE80211_CH_B_ONLY = (1 << 2), + IEEE80211_CH_NO_IBSS = (1 << 3), + IEEE80211_CH_UNIFORM_SPREADING = (1 << 4), + IEEE80211_CH_RADAR_DETECT = (1 << 5), + IEEE80211_CH_INVALID = (1 << 6), +}; + +struct ieee80211_channel { + u32 freq; + u8 channel; + u8 flags; + u8 max_power; +}; + +struct ieee80211_geo { + u8 name[4]; + u8 bg_channels; + u8 a_channels; + struct ieee80211_channel bg[IEEE80211_24GHZ_CHANNELS]; + struct ieee80211_channel a[IEEE80211_52GHZ_CHANNELS]; +}; struct ieee80211_device { struct net_device *dev; + struct ieee80211_security sec; /* Bookkeeping structures */ struct net_device_stats stats; struct ieee80211_stats ieee_stats; + struct ieee80211_geo geo; + /* Probe / Beacon management */ struct list_head network_free_list; struct list_head network_list; @@ -669,62 +847,102 @@ struct ieee80211_device { int scans; int scan_age; - int iw_mode; /* operating mode (IW_MODE_*) */ + int iw_mode; /* operating mode (IW_MODE_*) */ + struct iw_spy_data spy_data; /* iwspy support */ spinlock_t lock; - int tx_headroom; /* Set to size of any additional room needed at front - * of allocated Tx SKBs */ + int tx_headroom; /* Set to size of any additional room needed at front + * of allocated Tx SKBs */ u32 config; /* WEP and other encryption related settings at the device level */ - int open_wep; /* Set to 1 to allow unencrypted frames */ + int open_wep; /* Set to 1 to allow unencrypted frames */ - int reset_on_keychange; /* Set to 1 if the HW needs to be reset on + int reset_on_keychange; /* Set to 1 if the HW needs to be reset on * WEP key changes */ /* If the host performs {en,de}cryption, then set to 1 */ int host_encrypt; + int host_encrypt_msdu; int host_decrypt; - int ieee802_1x; /* is IEEE 802.1X used */ + /* host performs multicast decryption */ + int host_mc_decrypt; + + int host_open_frag; + int host_build_iv; + int ieee802_1x; /* is IEEE 802.1X used */ /* WPA data */ int wpa_enabled; int drop_unencrypted; - int tkip_countermeasures; int privacy_invoked; size_t wpa_ie_len; u8 *wpa_ie; struct list_head crypt_deinit_list; struct ieee80211_crypt_data *crypt[WEP_KEYS]; - int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ + int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */ struct timer_list crypt_deinit_timer; + int crypt_quiesced; - int bcrx_sta_key; /* use individual keys to override default keys even - * with RX of broad/multicast frames */ + int bcrx_sta_key; /* use individual keys to override default keys even + * with RX of broad/multicast frames */ /* Fragmentation structures */ struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN]; unsigned int frag_next_idx; - u16 fts; /* Fragmentation Threshold */ + u16 fts; /* Fragmentation Threshold */ + u16 rts; /* RTS threshold */ /* Association info */ u8 bssid[ETH_ALEN]; enum ieee80211_state state; - int mode; /* A, B, G */ - int modulation; /* CCK, OFDM */ - int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ - int abg_ture; /* ABG flag */ + int mode; /* A, B, G */ + int modulation; /* CCK, OFDM */ + int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */ + int abg_true; /* ABG flag */ + + int perfect_rssi; + int worst_rssi; /* Callback functions */ - void (*set_security)(struct net_device *dev, - struct ieee80211_security *sec); - int (*hard_start_xmit)(struct ieee80211_txb *txb, - struct net_device *dev); - int (*reset_port)(struct net_device *dev); + void (*set_security) (struct net_device * dev, + struct ieee80211_security * sec); + int (*hard_start_xmit) (struct ieee80211_txb * txb, + struct net_device * dev, int pri); + int (*reset_port) (struct net_device * dev); + int (*is_queue_full) (struct net_device * dev, int pri); + + int (*handle_management) (struct net_device * dev, + struct ieee80211_network * network, u16 type); + + /* Typical STA methods */ + int (*handle_auth) (struct net_device * dev, + struct ieee80211_auth * auth); + int (*handle_deauth) (struct net_device * dev, + struct ieee80211_auth * auth); + int (*handle_disassoc) (struct net_device * dev, + struct ieee80211_disassoc * assoc); + int (*handle_beacon) (struct net_device * dev, + struct ieee80211_beacon * beacon, + struct ieee80211_network * network); + int (*handle_probe_response) (struct net_device * dev, + struct ieee80211_probe_response * resp, + struct ieee80211_network * network); + int (*handle_probe_request) (struct net_device * dev, + struct ieee80211_probe_request * req, + struct ieee80211_rx_stats * stats); + int (*handle_assoc_response) (struct net_device * dev, + struct ieee80211_assoc_response * resp, + struct ieee80211_network * network); + + /* Typical AP methods */ + int (*handle_assoc_request) (struct net_device * dev); + int (*handle_reassoc_request) (struct net_device * dev, + struct ieee80211_reassoc_request * req); /* This must be the last item so that it points to the data * allocated beyond this structure by alloc_ieee80211 */ @@ -736,12 +954,12 @@ struct ieee80211_device { #define IEEE_G (1<<2) #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G) -extern inline void *ieee80211_priv(struct net_device *dev) +static inline void *ieee80211_priv(struct net_device *dev) { return ((struct ieee80211_device *)netdev_priv(dev))->priv; } -extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) +static inline int ieee80211_is_empty_essid(const char *essid, int essid_len) { /* Single white space is for Linksys APs */ if (essid_len == 1 && essid[0] == ' ') @@ -757,7 +975,8 @@ extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len) return 1; } -extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode) +static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, + int mode) { /* * It is possible for both access points and our device to support @@ -783,14 +1002,17 @@ extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mod return 0; } -extern inline int ieee80211_get_hdrlen(u16 fc) +static inline int ieee80211_get_hdrlen(u16 fc) { int hdrlen = IEEE80211_3ADDR_LEN; + u16 stype = WLAN_FC_GET_STYPE(fc); switch (WLAN_FC_GET_TYPE(fc)) { case IEEE80211_FTYPE_DATA: if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS)) hdrlen = IEEE80211_4ADDR_LEN; + if (stype & IEEE80211_STYPE_QOS_DATA) + hdrlen += 2; break; case IEEE80211_FTYPE_CTL: switch (WLAN_FC_GET_STYPE(fc)) { @@ -808,7 +1030,48 @@ extern inline int ieee80211_get_hdrlen(u16 fc) return hdrlen; } +static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr) +{ + switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) { + case IEEE80211_1ADDR_LEN: + return ((struct ieee80211_hdr_1addr *)hdr)->payload; + case IEEE80211_2ADDR_LEN: + return ((struct ieee80211_hdr_2addr *)hdr)->payload; + case IEEE80211_3ADDR_LEN: + return ((struct ieee80211_hdr_3addr *)hdr)->payload; + case IEEE80211_4ADDR_LEN: + return ((struct ieee80211_hdr_4addr *)hdr)->payload; + } + +} + +static inline int ieee80211_is_ofdm_rate(u8 rate) +{ + switch (rate & ~IEEE80211_BASIC_RATE_MASK) { + case IEEE80211_OFDM_RATE_6MB: + case IEEE80211_OFDM_RATE_9MB: + case IEEE80211_OFDM_RATE_12MB: + case IEEE80211_OFDM_RATE_18MB: + case IEEE80211_OFDM_RATE_24MB: + case IEEE80211_OFDM_RATE_36MB: + case IEEE80211_OFDM_RATE_48MB: + case IEEE80211_OFDM_RATE_54MB: + return 1; + } + return 0; +} +static inline int ieee80211_is_cck_rate(u8 rate) +{ + switch (rate & ~IEEE80211_BASIC_RATE_MASK) { + case IEEE80211_CCK_RATE_1MB: + case IEEE80211_CCK_RATE_2MB: + case IEEE80211_CCK_RATE_5MB: + case IEEE80211_CCK_RATE_11MB: + return 1; + } + return 0; +} /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev); @@ -817,18 +1080,30 @@ extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int ieee80211_set_encryption(struct ieee80211_device *ieee); /* ieee80211_tx.c */ -extern int ieee80211_xmit(struct sk_buff *skb, - struct net_device *dev); +extern int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev); extern void ieee80211_txb_free(struct ieee80211_txb *); - +extern int ieee80211_tx_frame(struct ieee80211_device *ieee, + struct ieee80211_hdr *frame, int len); /* ieee80211_rx.c */ extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, struct ieee80211_rx_stats *rx_stats); extern void ieee80211_rx_mgt(struct ieee80211_device *ieee, - struct ieee80211_hdr *header, + struct ieee80211_hdr_4addr *header, struct ieee80211_rx_stats *stats); +/* ieee80211_geo.c */ +extern const struct ieee80211_geo *ieee80211_get_geo(struct ieee80211_device + *ieee); +extern int ieee80211_set_geo(struct ieee80211_device *ieee, + const struct ieee80211_geo *geo); + +extern int ieee80211_is_valid_channel(struct ieee80211_device *ieee, + u8 channel); +extern int ieee80211_channel_to_index(struct ieee80211_device *ieee, + u8 channel); +extern u8 ieee80211_freq_to_channel(struct ieee80211_device *ieee, u32 freq); + /* ieee80211_wx.c */ extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee, struct iw_request_info *info, @@ -839,17 +1114,21 @@ extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee, extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee, struct iw_request_info *info, union iwreq_data *wrqu, char *key); - - -extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee) +extern int ieee80211_wx_set_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); +extern int ieee80211_wx_get_encodeext(struct ieee80211_device *ieee, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); + +static inline void ieee80211_increment_scans(struct ieee80211_device *ieee) { ieee->scans++; } -extern inline int ieee80211_get_scans(struct ieee80211_device *ieee) +static inline int ieee80211_get_scans(struct ieee80211_device *ieee) { return ieee->scans; } - -#endif /* IEEE80211_H */ +#endif /* IEEE80211_H */ diff --git a/include/net/ieee80211_crypt.h b/include/net/ieee80211_crypt.h index b58a3bcc0dc..0a1c2d82ca4 100644 --- a/include/net/ieee80211_crypt.h +++ b/include/net/ieee80211_crypt.h @@ -25,16 +25,22 @@ #include <linux/skbuff.h> +enum { + IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0), +}; + struct ieee80211_crypto_ops { const char *name; /* init new crypto context (e.g., allocate private data space, * select IV, etc.); returns NULL on failure or pointer to allocated * private data on success */ - void * (*init)(int keyidx); + void *(*init) (int keyidx); /* deinitialize crypto context and free allocated private data */ - void (*deinit)(void *priv); + void (*deinit) (void *priv); + + int (*build_iv) (struct sk_buff * skb, int hdr_len, void *priv); /* encrypt/decrypt return < 0 on error or >= 0 on success. The return * value from decrypt_mpdu is passed as the keyidx value for @@ -42,34 +48,39 @@ struct ieee80211_crypto_ops { * encryption; if not, error will be returned; these functions are * called for all MPDUs (i.e., fragments). */ - int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv); - int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv); + int (*encrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv); + int (*decrypt_mpdu) (struct sk_buff * skb, int hdr_len, void *priv); /* These functions are called for full MSDUs, i.e. full frames. * These can be NULL if full MSDU operations are not needed. */ - int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv); - int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len, - void *priv); + int (*encrypt_msdu) (struct sk_buff * skb, int hdr_len, void *priv); + int (*decrypt_msdu) (struct sk_buff * skb, int keyidx, int hdr_len, + void *priv); - int (*set_key)(void *key, int len, u8 *seq, void *priv); - int (*get_key)(void *key, int len, u8 *seq, void *priv); + int (*set_key) (void *key, int len, u8 * seq, void *priv); + int (*get_key) (void *key, int len, u8 * seq, void *priv); /* procfs handler for printing out key information and possible * statistics */ - char * (*print_stats)(char *p, void *priv); + char *(*print_stats) (char *p, void *priv); + + /* Crypto specific flag get/set for configuration settings */ + unsigned long (*get_flags) (void *priv); + unsigned long (*set_flags) (unsigned long flags, void *priv); /* maximum number of bytes added by encryption; encrypt buf is * allocated with extra_prefix_len bytes, copy of in_buf, and * extra_postfix_len; encrypt need not use all this space, but * the result must start at the beginning of the buffer and correct * length must be returned */ - int extra_prefix_len, extra_postfix_len; + int extra_mpdu_prefix_len, extra_mpdu_postfix_len; + int extra_msdu_prefix_len, extra_msdu_postfix_len; struct module *owner; }; struct ieee80211_crypt_data { - struct list_head list; /* delayed deletion list */ + struct list_head list; /* delayed deletion list */ struct ieee80211_crypto_ops *ops; void *priv; atomic_t refcnt; @@ -77,10 +88,11 @@ struct ieee80211_crypt_data { int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops); int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops); -struct ieee80211_crypto_ops * ieee80211_get_crypto_ops(const char *name); +struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name); void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int); void ieee80211_crypt_deinit_handler(unsigned long); void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee, struct ieee80211_crypt_data **crypt); +void ieee80211_crypt_quiescing(struct ieee80211_device *ieee); #endif diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h new file mode 100644 index 00000000000..429b73892a5 --- /dev/null +++ b/include/net/ieee80211_radiotap.h @@ -0,0 +1,231 @@ +/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */ +/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */ + +/*- + * Copyright (c) 2003, 2004 David Young. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of David Young may not be used to endorse or promote + * products derived from this software without specific prior + * written permission. + * + * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID + * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ + +/* + * Modifications to fit into the linux IEEE 802.11 stack, + * Mike Kershaw (dragorn@kismetwireless.net) + */ + +#ifndef IEEE80211RADIOTAP_H +#define IEEE80211RADIOTAP_H + +#include <linux/if_ether.h> +#include <linux/kernel.h> + +/* Radiotap header version (from official NetBSD feed) */ +#define IEEE80211RADIOTAP_VERSION "1.5" +/* Base version of the radiotap packet header data */ +#define PKTHDR_RADIOTAP_VERSION 0 + +/* A generic radio capture format is desirable. There is one for + * Linux, but it is neither rigidly defined (there were not even + * units given for some fields) nor easily extensible. + * + * I suggest the following extensible radio capture format. It is + * based on a bitmap indicating which fields are present. + * + * I am trying to describe precisely what the application programmer + * should expect in the following, and for that reason I tell the + * units and origin of each measurement (where it applies), or else I + * use sufficiently weaselly language ("is a monotonically nondecreasing + * function of...") that I cannot set false expectations for lawyerly + * readers. + */ + +/* XXX tcpdump/libpcap do not tolerate variable-length headers, + * yet, so we pad every radiotap header to 64 bytes. Ugh. + */ +#define IEEE80211_RADIOTAP_HDRLEN 64 + +/* The radio capture header precedes the 802.11 header. */ +struct ieee80211_radiotap_header { + u8 it_version; /* Version 0. Only increases + * for drastic changes, + * introduction of compatible + * new fields does not count. + */ + u8 it_pad; + u16 it_len; /* length of the whole + * header in bytes, including + * it_version, it_pad, + * it_len, and data fields. + */ + u32 it_present; /* A bitmap telling which + * fields are present. Set bit 31 + * (0x80000000) to extend the + * bitmap by another 32 bits. + * Additional extensions are made + * by setting bit 31. + */ +}; + +/* Name Data type Units + * ---- --------- ----- + * + * IEEE80211_RADIOTAP_TSFT u64 microseconds + * + * Value in microseconds of the MAC's 64-bit 802.11 Time + * Synchronization Function timer when the first bit of the + * MPDU arrived at the MAC. For received frames, only. + * + * IEEE80211_RADIOTAP_CHANNEL 2 x u16 MHz, bitmap + * + * Tx/Rx frequency in MHz, followed by flags (see below). + * + * IEEE80211_RADIOTAP_FHSS u16 see below + * + * For frequency-hopping radios, the hop set (first byte) + * and pattern (second byte). + * + * IEEE80211_RADIOTAP_RATE u8 500kb/s + * + * Tx/Rx data rate + * + * IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from + * one milliwatt (dBm) + * + * RF signal power at the antenna, decibel difference from + * one milliwatt. + * + * IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from + * one milliwatt (dBm) + * + * RF noise power at the antenna, decibel difference from one + * milliwatt. + * + * IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB) + * + * RF signal power at the antenna, decibel difference from an + * arbitrary, fixed reference. + * + * IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB) + * + * RF noise power at the antenna, decibel difference from an + * arbitrary, fixed reference point. + * + * IEEE80211_RADIOTAP_LOCK_QUALITY u16 unitless + * + * Quality of Barker code lock. Unitless. Monotonically + * nondecreasing with "better" lock strength. Called "Signal + * Quality" in datasheets. (Is there a standard way to measure + * this?) + * + * IEEE80211_RADIOTAP_TX_ATTENUATION u16 unitless + * + * Transmit power expressed as unitless distance from max + * power set at factory calibration. 0 is max power. + * Monotonically nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DB_TX_ATTENUATION u16 decibels (dB) + * + * Transmit power expressed as decibel distance from max power + * set at factory calibration. 0 is max power. Monotonically + * nondecreasing with lower power levels. + * + * IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from + * one milliwatt (dBm) + * + * Transmit power expressed as dBm (decibels from a 1 milliwatt + * reference). This is the absolute power level measured at + * the antenna port. + * + * IEEE80211_RADIOTAP_FLAGS u8 bitmap + * + * Properties of transmitted and received frames. See flags + * defined below. + * + * IEEE80211_RADIOTAP_ANTENNA u8 antenna index + * + * Unitless indication of the Rx/Tx antenna for this packet. + * The first antenna is antenna 0. + * + * IEEE80211_RADIOTAP_FCS u32 data + * + * FCS from frame in network byte order. + */ +enum ieee80211_radiotap_type { + IEEE80211_RADIOTAP_TSFT = 0, + IEEE80211_RADIOTAP_FLAGS = 1, + IEEE80211_RADIOTAP_RATE = 2, + IEEE80211_RADIOTAP_CHANNEL = 3, + IEEE80211_RADIOTAP_FHSS = 4, + IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5, + IEEE80211_RADIOTAP_DBM_ANTNOISE = 6, + IEEE80211_RADIOTAP_LOCK_QUALITY = 7, + IEEE80211_RADIOTAP_TX_ATTENUATION = 8, + IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9, + IEEE80211_RADIOTAP_DBM_TX_POWER = 10, + IEEE80211_RADIOTAP_ANTENNA = 11, + IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12, + IEEE80211_RADIOTAP_DB_ANTNOISE = 13, + IEEE80211_RADIOTAP_EXT = 31, +}; + +/* Channel flags. */ +#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */ +#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */ +#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */ +#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */ +#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */ +#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */ +#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */ +#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */ + +/* For IEEE80211_RADIOTAP_FLAGS */ +#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received + * during CFP + */ +#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received + * with short + * preamble + */ +#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received + * with WEP encryption + */ +#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received + * with fragmentation + */ +#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */ +#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between + * 802.11 header and payload + * (to 32-bit boundary) + */ + +/* Ugly macro to convert literal channel numbers into their mhz equivalents + * There are certianly some conditions that will break this (like feeding it '30') + * but they shouldn't arise since nothing talks on channel 30. */ +#define ieee80211chan2mhz(x) \ + (((x) <= 14) ? \ + (((x) == 14) ? 2484 : ((x) * 5) + 2407) : \ + ((x) + 1000) * 5) + +#endif /* IEEE80211_RADIOTAP_H */ diff --git a/include/net/syncppp.h b/include/net/syncppp.h index 614cb6ba564..877efa43470 100644 --- a/include/net/syncppp.h +++ b/include/net/syncppp.h @@ -86,7 +86,6 @@ static inline struct sppp *sppp_of(struct net_device *dev) void sppp_attach (struct ppp_device *pd); void sppp_detach (struct net_device *dev); -void sppp_input (struct net_device *dev, struct sk_buff *m); int sppp_do_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd); struct sk_buff *sppp_dequeue (struct net_device *dev); int sppp_isempty (struct net_device *dev); |