Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

5 files changed, 120 insertions, 38 deletions

diff --git a/include/dt-bindings/clk/exynos-audss-clk.h b/include/dt-bindings/clk/exynos-audss-clk.h
new file mode 100644
index 00000000000..8279f427c60
--- /dev/null
+++ b/include/dt-bindings/clk/exynos-audss-clk.h
@@ -0,0 +1,25 @@
+/*
+ * This header provides constants for Samsung audio subsystem
+ * clock controller.
+ *
+ * The constants defined in this header are being used in dts
+ * and exynos audss driver.
+ */
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+
+#define EXYNOS_MOUT_AUDSS	0
+#define EXYNOS_MOUT_I2S	1
+#define EXYNOS_DOUT_SRP	2
+#define EXYNOS_DOUT_AUD_BUS	3
+#define EXYNOS_DOUT_I2S	4
+#define EXYNOS_SRP_CLK		5
+#define EXYNOS_I2S_BUS		6
+#define EXYNOS_SCLK_I2S	7
+#define EXYNOS_PCM_BUS		8
+#define EXYNOS_SCLK_PCM	9
+
+#define EXYNOS_AUDSS_MAX_CLKS	10
+
+#endif
diff --git a/include/linux/omap-mailbox.h b/include/linux/omap-mailbox.h
new file mode 100644
index 00000000000..f8322d9cd23
--- /dev/null
+++ b/include/linux/omap-mailbox.h
@@ -0,0 +1,29 @@
+/*
+ * omap-mailbox: interprocessor communication module for OMAP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OMAP_MAILBOX_H
+#define OMAP_MAILBOX_H
+
+typedef u32 mbox_msg_t;
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
+
+struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
+
+void omap_mbox_save_ctx(struct omap_mbox *mbox);
+void omap_mbox_restore_ctx(struct omap_mbox *mbox);
+void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+
+#endif /* OMAP_MAILBOX_H */
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
index 4b781014b0a..1bb9b185225 100644
--- a/include/linux/platform_data/dma-ste-dma40.h
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -70,23 +70,8 @@ enum stedma40_flow_ctrl {
 	STEDMA40_FLOW_CTRL,
 };
 
-enum stedma40_periph_data_width {
-	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
-	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
-	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
-	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
-	STEDMA40_MEM_TO_MEM = 1,
-	STEDMA40_MEM_TO_PERIPH,
-	STEDMA40_PERIPH_TO_MEM,
-	STEDMA40_PERIPH_TO_PERIPH
-};
-
-
 /**
- * struct stedma40_chan_cfg - dst/src channel configuration
+ * struct stedma40_half_channel_info - dst/src channel configuration
  *
  * @big_endian: true if the src/dst should be read as big endian
  * @data_width: Data width of the src/dst hardware
@@ -95,7 +80,7 @@ enum stedma40_xfer_dir {
  */
 struct stedma40_half_channel_info {
 	bool big_endian;
-	enum stedma40_periph_data_width data_width;
+	enum dma_slave_buswidth data_width;
 	int psize;
 	enum stedma40_flow_ctrl flow_ctrl;
 };
@@ -109,8 +94,7 @@ struct stedma40_half_channel_info {
  * version 3+, i.e DB8500v2+
  * @mode: channel mode: physical, logical, or operation
  * @mode_opt: options for the chosen channel mode
- * @src_dev_type: Src device type
- * @dst_dev_type: Dst device type
+ * @dev_type: src/dst device type (driver uses dir to figure out which)
  * @src_info: Parameters for dst half channel
  * @dst_info: Parameters for dst half channel
  * @use_fixed_channel: if true, use physical channel specified by phy_channel
@@ -121,13 +105,12 @@ struct stedma40_half_channel_info {
  *
  */
 struct stedma40_chan_cfg {
-	enum stedma40_xfer_dir			 dir;
+	enum dma_transfer_direction		 dir;
 	bool					 high_priority;
 	bool					 realtime;
 	enum stedma40_mode			 mode;
 	enum stedma40_mode_opt			 mode_opt;
-	int					 src_dev_type;
-	int					 dst_dev_type;
+	int					 dev_type;
 	struct stedma40_half_channel_info	 src_info;
 	struct stedma40_half_channel_info	 dst_info;
 
@@ -138,13 +121,8 @@ struct stedma40_chan_cfg {
 /**
  * struct stedma40_platform_data - Configuration struct for the dma device.
  *
- * @dev_len: length of dev_tx and dev_rx
  * @dev_tx: mapping between destination event line and io address
  * @dev_rx: mapping between source event line and io address
- * @memcpy: list of memcpy event lines
- * @memcpy_len: length of memcpy
- * @memcpy_conf_phy: default configuration of physical channel memcpy
- * @memcpy_conf_log: default configuration of logical channel memcpy
  * @disabled_channels: A vector, ending with -1, that marks physical channels
  * that are for different reasons not available for the driver.
  * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
@@ -154,22 +132,17 @@ struct stedma40_chan_cfg {
  * @num_of_soft_lli_chans: The number of channels that needs to be configured
  * to use SoftLLI.
  * @use_esram_lcla: flag for mapping the lcla into esram region
+ * @num_of_memcpy_chans: The number of channels reserved for memcpy.
  * @num_of_phy_chans: The number of physical channels implemented in HW.
  * 0 means reading the number of channels from DMA HW but this is only valid
  * for 'multiple of 4' channels, like 8.
  */
 struct stedma40_platform_data {
-	u32				 dev_len;
-	const dma_addr_t		*dev_tx;
-	const dma_addr_t		*dev_rx;
-	int				*memcpy;
-	u32				 memcpy_len;
-	struct stedma40_chan_cfg	*memcpy_conf_phy;
-	struct stedma40_chan_cfg	*memcpy_conf_log;
 	int				 disabled_channels[STEDMA40_MAX_PHYS];
 	int				*soft_lli_chans;
 	int				 num_of_soft_lli_chans;
 	bool				 use_esram_lcla;
+	int				 num_of_memcpy_chans;
 	int				 num_of_phy_chans;
 };
 
diff --git a/include/linux/platform_data/mailbox-omap.h b/include/linux/platform_data/mailbox-omap.h
new file mode 100644
index 00000000000..4631dbb4255
--- /dev/null
+++ b/include/linux/platform_data/mailbox-omap.h
@@ -0,0 +1,58 @@
+/*
+ * mailbox-omap.h
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_MAILBOX_H
+#define _PLAT_MAILBOX_H
+
+/* Interrupt register configuration types */
+#define MBOX_INTR_CFG_TYPE1	(0)
+#define MBOX_INTR_CFG_TYPE2	(1)
+
+/**
+ * struct omap_mbox_dev_info - OMAP mailbox device attribute info
+ * @name:	name of the mailbox device
+ * @tx_id:	mailbox queue id used for transmitting messages
+ * @rx_id:	mailbox queue id on which messages are received
+ * @irq_id:	irq identifier number to use from the hwmod data
+ * @usr_id:	mailbox user id for identifying the interrupt into
+ *			the MPU interrupt controller.
+ */
+struct omap_mbox_dev_info {
+	const char *name;
+	u32 tx_id;
+	u32 rx_id;
+	u32 irq_id;
+	u32 usr_id;
+};
+
+/**
+ * struct omap_mbox_pdata - OMAP mailbox platform data
+ * @intr_type:	type of interrupt configuration registers used
+			while programming mailbox queue interrupts
+ * @num_users:	number of users (processor devices) that the mailbox
+ *			h/w block can interrupt
+ * @num_fifos:	number of h/w fifos within the mailbox h/w block
+ * @info_cnt:	number of mailbox devices for the platform
+ * @info:	array of mailbox device attributes
+ */
+struct omap_mbox_pdata {
+	u32 intr_type;
+	u32 num_users;
+	u32 num_fifos;
+	u32 info_cnt;
+	struct omap_mbox_dev_info *info;
+};
+
+#endif /* _PLAT_MAILBOX_H */
diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h
index 4c1cc50a595..dd9c83ac7de 100644
--- a/include/linux/platform_data/usb-musb-ux500.h
+++ b/include/linux/platform_data/usb-musb-ux500.h
@@ -9,14 +9,11 @@
 
 #include <linux/dmaengine.h>
 
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8
 
 struct ux500_musb_board_data {
 	void	**dma_rx_param_array;
 	void	**dma_tx_param_array;
-	u32	num_rx_channels;
-	u32	num_tx_channels;
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };