[MIPS] Pb1000 code style cleanup

Fix several errors and warnings given by checkpatch.pl:

- use of C99 // comments;

- brace not on the same line with condition in the 'switch' statement;

- printk() without KERN_* facility level;

- unnecessary braces for single-statement block;

- using simple_strtol() where strict_strtol() could be used.

In addition to these changes, also do the following:

- properly indent the 'switch' statement;

- remove needless parentheses;

- insert spaces between operator and its operands;

- replace numeric literals/expressions with the matching macros;

- remove useless #if dirctive from board_setup();

- remove unneeded numeric literal type casts;

- remove space after the type cast's closing parenthesis;

- replace spaces after the macro name with tabs in the #define directives, and
  sometimes insert spaces there;

- remove excess new lines;

- fix typos/errors, capitalize acronyms, etc. in the comments;

- make the multi-line comment style consistent with the kernel style elsewhere
  by adding empty first/last line;

- combine some comments;

- update MontaVista copyright;

- remove Pete Popov's old email address...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 52 insertions, 137 deletions

diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
index b52e0e7ee3f..6d1ff9060e4 100644
--- a/include/asm-mips/mach-pb1x00/pb1000.h
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -1,9 +1,8 @@
 /*
- * Alchemy Semi PB1000 Referrence Board
+ * Alchemy Semi Pb1000 Referrence Board
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  * ########################################################################
  *
@@ -28,145 +27,61 @@
 #define __ASM_PB1000_H
 
 /* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-#define PB1000_PCR     0xBE000000
-#  define PCR_SLOT_0_VPP0  (1<<0)
-#  define PCR_SLOT_0_VPP1  (1<<1)
-#  define PCR_SLOT_0_VCC0  (1<<2)
-#  define PCR_SLOT_0_VCC1  (1<<3)
-#  define PCR_SLOT_0_RST   (1<<4)
-
-#  define PCR_SLOT_1_VPP0  (1<<8)
-#  define PCR_SLOT_1_VPP1  (1<<9)
-#  define PCR_SLOT_1_VCC0  (1<<10)
-#  define PCR_SLOT_1_VCC1  (1<<11)
-#  define PCR_SLOT_1_RST   (1<<12)
-
-#define PB1000_MDR     0xBE000004
-#  define MDR_PI        (1<<5)  /* pcmcia int latch  */
-#  define MDR_EPI      (1<<14)  /* enable pcmcia int */
-#  define MDR_CPI      (1<<15)  /* clear pcmcia int  */
-
-#define PB1000_ACR1    0xBE000008
-#  define ACR1_SLOT_0_CD1    (1<<0)  /* card detect 1     */
-#  define ACR1_SLOT_0_CD2    (1<<1)  /* card detect 2     */
-#  define ACR1_SLOT_0_READY  (1<<2)  /* ready             */
-#  define ACR1_SLOT_0_STATUS (1<<3)  /* status change     */
-#  define ACR1_SLOT_0_VS1    (1<<4)  /* voltage sense 1   */
-#  define ACR1_SLOT_0_VS2    (1<<5)  /* voltage sense 2   */
-#  define ACR1_SLOT_0_INPACK (1<<6)  /* inpack pin status */
-#  define ACR1_SLOT_1_CD1    (1<<8)  /* card detect 1     */
-#  define ACR1_SLOT_1_CD2    (1<<9)  /* card detect 2     */
-#  define ACR1_SLOT_1_READY  (1<<10) /* ready             */
-#  define ACR1_SLOT_1_STATUS (1<<11) /* status change     */
-#  define ACR1_SLOT_1_VS1    (1<<12) /* voltage sense 1   */
-#  define ACR1_SLOT_1_VS2    (1<<13) /* voltage sense 2   */
-#  define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
-
-#define CPLD_AUX0      0xBE00000C
-#define CPLD_AUX1      0xBE000010
-#define CPLD_AUX2      0xBE000014
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+#define PB1000_PCR		0xBE000000
+#  define PCR_SLOT_0_VPP0	(1 << 0)
+#  define PCR_SLOT_0_VPP1	(1 << 1)
+#  define PCR_SLOT_0_VCC0	(1 << 2)
+#  define PCR_SLOT_0_VCC1	(1 << 3)
+#  define PCR_SLOT_0_RST	(1 << 4)
+#  define PCR_SLOT_1_VPP0	(1 << 8)
+#  define PCR_SLOT_1_VPP1	(1 << 9)
+#  define PCR_SLOT_1_VCC0	(1 << 10)
+#  define PCR_SLOT_1_VCC1	(1 << 11)
+#  define PCR_SLOT_1_RST	(1 << 12)
+
+#define PB1000_MDR		0xBE000004
+#  define MDR_PI		(1 << 5)	/* PCMCIA int latch  */
+#  define MDR_EPI		(1 << 14)	/* enable PCMCIA int */
+#  define MDR_CPI		(1 << 15)	/* clear  PCMCIA int  */
+
+#define PB1000_ACR1		0xBE000008
+#  define ACR1_SLOT_0_CD1	(1 << 0)	/* card detect 1	*/
+#  define ACR1_SLOT_0_CD2	(1 << 1)	/* card detect 2	*/
+#  define ACR1_SLOT_0_READY	(1 << 2)	/* ready		*/
+#  define ACR1_SLOT_0_STATUS	(1 << 3)	/* status change	*/
+#  define ACR1_SLOT_0_VS1	(1 << 4)	/* voltage sense 1	*/
+#  define ACR1_SLOT_0_VS2	(1 << 5)	/* voltage sense 2	*/
+#  define ACR1_SLOT_0_INPACK	(1 << 6)	/* inpack pin status	*/
+#  define ACR1_SLOT_1_CD1	(1 << 8)	/* card detect 1	*/
+#  define ACR1_SLOT_1_CD2	(1 << 9)	/* card detect 2	*/
+#  define ACR1_SLOT_1_READY	(1 << 10)	/* ready		*/
+#  define ACR1_SLOT_1_STATUS	(1 << 11)	/* status change	*/
+#  define ACR1_SLOT_1_VS1	(1 << 12)	/* voltage sense 1	*/
+#  define ACR1_SLOT_1_VS2	(1 << 13)	/* voltage sense 2	*/
+#  define ACR1_SLOT_1_INPACK	(1 << 14)	/* inpack pin status	*/
+
+#define CPLD_AUX0		0xBE00000C
+#define CPLD_AUX1		0xBE000010
+#define CPLD_AUX2		0xBE000014
 
 /* Voltage levels */
 
 /* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0<<1) | (0<<0))
-#define VPP_5V  ((1<<1) | (0<<0))
-#define VPP_3V  ((0<<1) | (1<<0))
-#define VPP_12V ((0<<1) | (1<<0))
-#define VPP_HIZ ((1<<1) | (1<<0))
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V	((1 << 1) | (0 << 0))
+#define VPP_3V	((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
 
 /* VCCEN1 - VCCEN0 */
-#define VCC_3V  ((0<<1) | (1<<0))
-#define VCC_5V  ((1<<1) | (0<<0))
-#define VCC_HIZ ((0<<1) | (0<<0))
+#define VCC_3V	((0 << 1) | (1 << 0))
+#define VCC_5V	((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
 
 /* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
-	((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
-
-/* PCI PB1000 specific defines */
-/* The reason these defines are here instead of au1000.h is because
- * the Au1000 does not have a PCI bus controller so the PCI implementation
- * on the some of the older Pb1000 boards was very board specific.
- */
-#define PCI_CONFIG_BASE   0xBA020000 /* the only external slot */
-
-#define SDRAM_DEVID       0xBA010000
-#define SDRAM_CMD         0xBA010004
-#define SDRAM_CLASS       0xBA010008
-#define SDRAM_MISC        0xBA01000C
-#define SDRAM_MBAR        0xBA010010
-
-#define PCI_IO_DATA_PORT  0xBA800000
-
-#define PCI_IO_ADDR       0xBE00001C
-#define PCI_INT_ACK       0xBBC00000
-#define PCI_IO_READ       0xBBC00020
-#define PCI_IO_WRITE      0xBBC00030
-
-#define PCI_BRIDGE_CONFIG 0xBE000018
-
-#define PCI_IO_START      0x10000000
-#define PCI_IO_END        0x1000ffff
-#define PCI_MEM_START     0x18000000
-#define PCI_MEM_END       0x18ffffff
-
-#define PCI_FIRST_DEVFN   0
-#define PCI_LAST_DEVFN    1
-
-static inline u8 au_pci_io_readb(u32 addr)
-{
-	writel(addr, PCI_IO_ADDR);
-	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
-	return (readl(PCI_IO_DATA_PORT) & 0xff);
-}
-
-static inline u16 au_pci_io_readw(u32 addr)
-{
-	writel(addr, PCI_IO_ADDR);
-	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
-	return (readl(PCI_IO_DATA_PORT) & 0xffff);
-}
-
-static inline u32 au_pci_io_readl(u32 addr)
-{
-	writel(addr, PCI_IO_ADDR);
-	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
-	return readl(PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writeb(u8 val, u32 addr)
-{
-	writel(addr, PCI_IO_ADDR);
-	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
-	writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writew(u16 val, u32 addr)
-{
-	writel(addr, PCI_IO_ADDR);
-	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
-	writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writel(u32 val, u32 addr)
-{
-	writel(addr, PCI_IO_ADDR);
-	writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
-	writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void set_sdram_extbyte(void)
-{
-	writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
-}
-
-static inline void set_slot_extbyte(void)
-{
-	writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
-}
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
 #endif /* __ASM_PB1000_H */