Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

9 files changed, 321 insertions, 42 deletions

diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 12334f9190c..03b2f30d2ac 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -137,6 +137,36 @@ struct bcma_host_ops {
 
 #define BCMA_MAX_NR_CORES		16
 
+/* Chip IDs of PCIe devices */
+#define BCMA_CHIP_ID_BCM4313	0x4313
+#define BCMA_CHIP_ID_BCM43224	43224
+#define  BCMA_PKG_ID_BCM43224_FAB_CSM	0x8
+#define  BCMA_PKG_ID_BCM43224_FAB_SMIC	0xa
+#define BCMA_CHIP_ID_BCM43225	43225
+#define BCMA_CHIP_ID_BCM43227	43227
+#define BCMA_CHIP_ID_BCM43228	43228
+#define BCMA_CHIP_ID_BCM43421	43421
+#define BCMA_CHIP_ID_BCM43428	43428
+#define BCMA_CHIP_ID_BCM43431	43431
+#define BCMA_CHIP_ID_BCM43460	43460
+#define BCMA_CHIP_ID_BCM4331	0x4331
+#define BCMA_CHIP_ID_BCM6362	0x6362
+#define BCMA_CHIP_ID_BCM4360	0x4360
+#define BCMA_CHIP_ID_BCM4352	0x4352
+
+/* Chip IDs of SoCs */
+#define BCMA_CHIP_ID_BCM4706	0x5300
+#define BCMA_CHIP_ID_BCM4716	0x4716
+#define  BCMA_PKG_ID_BCM4716	8
+#define  BCMA_PKG_ID_BCM4717	9
+#define  BCMA_PKG_ID_BCM4718	10
+#define BCMA_CHIP_ID_BCM47162	47162
+#define BCMA_CHIP_ID_BCM4748	0x4748
+#define BCMA_CHIP_ID_BCM4749	0x4749
+#define BCMA_CHIP_ID_BCM5356	0x5356
+#define BCMA_CHIP_ID_BCM5357	0x5357
+#define BCMA_CHIP_ID_BCM53572	53572
+
 struct bcma_device {
 	struct bcma_bus *bus;
 	struct bcma_device_id id;
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 8bbfe31fbac..fbd0d49dc4d 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -88,6 +88,11 @@
 #define  BCMA_CC_CHIPST_4313_OTP_PRESENT	2
 #define  BCMA_CC_CHIPST_4331_SPROM_PRESENT	2
 #define  BCMA_CC_CHIPST_4331_OTP_PRESENT	4
+#define  BCMA_CC_CHIPST_4706_PKG_OPTION		BIT(0) /* 0: full-featured package 1: low-cost package */
+#define  BCMA_CC_CHIPST_4706_SFLASH_PRESENT	BIT(1) /* 0: parallel, 1: serial flash is present */
+#define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
+#define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
+#define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
 #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
 #define  BCMA_CC_JCMD_START		0x80000000
 #define  BCMA_CC_JCMD_BUSY		0x80000000
@@ -280,6 +285,15 @@
 
 /* 4706 PMU */
 #define BCMA_CC_PMU4706_MAINPLL_PLL0	0
+#define BCMA_CC_PMU6_4706_PROCPLL_OFF	4	/* The CPU PLL */
+#define  BCMA_CC_PMU6_4706_PROC_P2DIV_MASK	0x000f0000
+#define  BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT	16
+#define  BCMA_CC_PMU6_4706_PROC_P1DIV_MASK	0x0000f000
+#define  BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT	12
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK	0x00000ff8
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT	3
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_MODE_MASK	0x00000007
+#define  BCMA_CC_PMU6_4706_PROC_NDIV_MODE_SHIFT	0
 
 /* ALP clock on pre-PMU chips */
 #define BCMA_CC_PMU_ALP_CLOCK		20000000
@@ -308,6 +322,19 @@
 #define BCMA_CC_PPL_PCHI_OFF		5
 #define BCMA_CC_PPL_PCHI_MASK		0x0000003f
 
+#define BCMA_CC_PMU_PLL_CTL0		0
+#define BCMA_CC_PMU_PLL_CTL1		1
+#define BCMA_CC_PMU_PLL_CTL2		2
+#define BCMA_CC_PMU_PLL_CTL3		3
+#define BCMA_CC_PMU_PLL_CTL4		4
+#define BCMA_CC_PMU_PLL_CTL5		5
+
+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK	0x00f00000
+#define BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT	20
+
+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK	0x1ff00000
+#define BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT	20
+
 /* BCM4331 ChipControl numbers. */
 #define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
 #define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
@@ -321,9 +348,18 @@
 #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
 #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
 #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_EXTPA_EN2		BIT(12)	/* 0 ext pa disable, 1 ext pa enabled */
 #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
 #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
 
+/* 43224 chip-specific ChipControl register bits */
+#define BCMA_CCTRL_43224_GPIO_TOGGLE		0x8000		/* gpio[3:0] pins as btcoex or s/w gpio */
+#define BCMA_CCTRL_43224A0_12MA_LED_DRIVE	0x00F000F0	/* 12 mA drive strength */
+#define BCMA_CCTRL_43224B0_12MA_LED_DRIVE	0xF0		/* 12 mA drive strength for later 43224s */
+
+/* 4313 Chip specific ChipControl register bits */
+#define BCMA_CCTRL_4313_12MA_LED_DRIVE		0x00000007	/* 12 mA drive strengh for later 4313 */
+
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
  */
@@ -411,5 +447,6 @@ extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
 					u32 offset, u32 mask, u32 set);
 extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
 				       u32 offset, u32 mask, u32 set);
+extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
 
 #endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 318fc1f705b..e02fc682bb6 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -47,6 +47,7 @@
 #define IEEE80211_FCTL_MOREDATA		0x2000
 #define IEEE80211_FCTL_PROTECTED	0x4000
 #define IEEE80211_FCTL_ORDER		0x8000
+#define IEEE80211_FCTL_CTL_EXT		0x0f00
 
 #define IEEE80211_SCTL_FRAG		0x000F
 #define IEEE80211_SCTL_SEQ		0xFFF0
@@ -54,6 +55,7 @@
 #define IEEE80211_FTYPE_MGMT		0x0000
 #define IEEE80211_FTYPE_CTL		0x0004
 #define IEEE80211_FTYPE_DATA		0x0008
+#define IEEE80211_FTYPE_EXT		0x000c
 
 /* management */
 #define IEEE80211_STYPE_ASSOC_REQ	0x0000
@@ -70,6 +72,7 @@
 #define IEEE80211_STYPE_ACTION		0x00D0
 
 /* control */
+#define IEEE80211_STYPE_CTL_EXT		0x0060
 #define IEEE80211_STYPE_BACK_REQ	0x0080
 #define IEEE80211_STYPE_BACK		0x0090
 #define IEEE80211_STYPE_PSPOLL		0x00A0
@@ -97,6 +100,18 @@
 #define IEEE80211_STYPE_QOS_CFPOLL		0x00E0
 #define IEEE80211_STYPE_QOS_CFACKPOLL		0x00F0
 
+/* extension, added by 802.11ad */
+#define IEEE80211_STYPE_DMG_BEACON		0x0000
+
+/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
+#define IEEE80211_CTL_EXT_POLL		0x2000
+#define IEEE80211_CTL_EXT_SPR		0x3000
+#define IEEE80211_CTL_EXT_GRANT	0x4000
+#define IEEE80211_CTL_EXT_DMG_CTS	0x5000
+#define IEEE80211_CTL_EXT_DMG_DTS	0x6000
+#define IEEE80211_CTL_EXT_SSW		0x8000
+#define IEEE80211_CTL_EXT_SSW_FBACK	0x9000
+#define IEEE80211_CTL_EXT_SSW_ACK	0xa000
 
 /* miscellaneous IEEE 802.11 constants */
 #define IEEE80211_MAX_FRAG_THRESHOLD	2352
@@ -1092,6 +1107,73 @@ struct ieee80211_ht_operation {
 #define WLAN_HT_SMPS_CONTROL_STATIC	1
 #define WLAN_HT_SMPS_CONTROL_DYNAMIC	3
 
+#define VHT_MCS_SUPPORTED_SET_SIZE      8
+
+struct ieee80211_vht_capabilities {
+	__le32 vht_capabilities_info;
+	u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE];
+} __packed;
+
+struct ieee80211_vht_operation {
+	u8 vht_op_info_chwidth;
+	u8 vht_op_info_chan_center_freq_seg1_idx;
+	u8 vht_op_info_chan_center_freq_seg2_idx;
+	__le16 vht_basic_mcs_set;
+} __packed;
+
+/**
+ * struct ieee80211_vht_mcs_info - VHT MCS information
+ * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams
+ * @rx_highest: Indicates highest long GI VHT PPDU data rate
+ *	STA can receive. Rate expressed in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest RX data rate supported.
+ * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
+ * @tx_highest: Indicates highest long GI VHT PPDU data rate
+ *	STA can transmit. Rate expressed in units of 1 Mbps.
+ *	If this field is 0 this value should not be used to
+ *	consider the highest TX data rate supported.
+ */
+struct ieee80211_vht_mcs_info {
+	__le16 rx_mcs_map;
+	__le16 rx_highest;
+	__le16 tx_mcs_map;
+	__le16 tx_highest;
+} __packed;
+
+#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0
+#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1
+#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT  2
+#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3
+
+/* 802.11ac VHT Capabilities */
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895                0x00000000
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991                0x00000001
+#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454               0x00000002
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ              0x00000004
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ     0x00000008
+#define IEEE80211_VHT_CAP_RXLDPC                              0x00000010
+#define IEEE80211_VHT_CAP_SHORT_GI_80                         0x00000020
+#define IEEE80211_VHT_CAP_SHORT_GI_160                        0x00000040
+#define IEEE80211_VHT_CAP_TXSTBC                              0x00000080
+#define IEEE80211_VHT_CAP_RXSTBC_1                            0x00000100
+#define IEEE80211_VHT_CAP_RXSTBC_2                            0x00000200
+#define IEEE80211_VHT_CAP_RXSTBC_3                            0x00000300
+#define IEEE80211_VHT_CAP_RXSTBC_4                            0x00000400
+#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE               0x00000800
+#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE               0x00001000
+#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX             0x00006000
+#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX              0x00030000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE               0x00080000
+#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE               0x00100000
+#define IEEE80211_VHT_CAP_VHT_TXOP_PS                         0x00200000
+#define IEEE80211_VHT_CAP_HTC_VHT                             0x00400000
+#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT          0x00800000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB   0x08000000
+#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB     0x0c000000
+#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN                  0x10000000
+#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN                  0x20000000
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -1124,6 +1206,21 @@ struct ieee80211_ht_operation {
 #define WLAN_CAPABILITY_QOS		(1<<9)
 #define WLAN_CAPABILITY_SHORT_SLOT_TIME	(1<<10)
 #define WLAN_CAPABILITY_DSSS_OFDM	(1<<13)
+
+/* DMG (60gHz) 802.11ad */
+/* type - bits 0..1 */
+#define WLAN_CAPABILITY_DMG_TYPE_IBSS		(1<<0) /* Tx by: STA */
+#define WLAN_CAPABILITY_DMG_TYPE_PBSS		(2<<0) /* Tx by: PCP */
+#define WLAN_CAPABILITY_DMG_TYPE_AP		(3<<0) /* Tx by: AP */
+
+#define WLAN_CAPABILITY_DMG_CBAP_ONLY		(1<<2)
+#define WLAN_CAPABILITY_DMG_CBAP_SOURCE	(1<<3)
+#define WLAN_CAPABILITY_DMG_PRIVACY		(1<<4)
+#define WLAN_CAPABILITY_DMG_ECPAC		(1<<5)
+
+#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT	(1<<8)
+#define WLAN_CAPABILITY_DMG_RADIO_MEASURE	(1<<12)
+
 /* measurement */
 #define IEEE80211_SPCT_MSR_RPRT_MODE_LATE	(1<<0)
 #define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE	(1<<1)
@@ -1133,7 +1230,6 @@ struct ieee80211_ht_operation {
 #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA	1
 #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI	2
 
-
 /* 802.11g ERP information element */
 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
 #define WLAN_ERP_USE_PROTECTION (1<<1)
@@ -1145,6 +1241,16 @@ enum {
 	WLAN_ERP_PREAMBLE_LONG = 1,
 };
 
+/* Band ID, 802.11ad #8.4.1.45 */
+enum {
+	IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */
+	IEEE80211_BANDID_SUB1  = 1, /* Sub-1 GHz (excluding TV white spaces) */
+	IEEE80211_BANDID_2G    = 2, /* 2.4 GHz */
+	IEEE80211_BANDID_3G    = 3, /* 3.6 GHz */
+	IEEE80211_BANDID_5G    = 4, /* 4.9 and 5 GHz */
+	IEEE80211_BANDID_60G   = 5, /* 60 GHz */
+};
+
 /* Status codes */
 enum ieee80211_statuscode {
 	WLAN_STATUS_SUCCESS = 0,
@@ -1196,6 +1302,17 @@ enum ieee80211_statuscode {
 	WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
 	WLAN_STATUS_FCG_NOT_SUPP = 78,
 	WLAN_STATUS_STA_NO_TBTT = 78,
+	/* 802.11ad */
+	WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39,
+	WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47,
+	WLAN_STATUS_REJECT_WITH_SCHEDULE = 83,
+	WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86,
+	WLAN_STATUS_PERFORMING_FST_NOW = 87,
+	WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88,
+	WLAN_STATUS_REJECT_U_PID_SETTING = 89,
+	WLAN_STATUS_REJECT_DSE_BAND = 96,
+	WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99,
+	WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103,
 };
 
 
@@ -1352,6 +1469,43 @@ enum ieee80211_eid {
 	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
 	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
 	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
+
+	WLAN_EID_VHT_CAPABILITY = 191,
+	WLAN_EID_VHT_OPERATION = 192,
+
+	/* 802.11ad */
+	WLAN_EID_NON_TX_BSSID_CAP =  83,
+	WLAN_EID_WAKEUP_SCHEDULE = 143,
+	WLAN_EID_EXT_SCHEDULE = 144,
+	WLAN_EID_STA_AVAILABILITY = 145,
+	WLAN_EID_DMG_TSPEC = 146,
+	WLAN_EID_DMG_AT = 147,
+	WLAN_EID_DMG_CAP = 148,
+	WLAN_EID_DMG_OPERATION = 151,
+	WLAN_EID_DMG_BSS_PARAM_CHANGE = 152,
+	WLAN_EID_DMG_BEAM_REFINEMENT = 153,
+	WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154,
+	WLAN_EID_AWAKE_WINDOW = 157,
+	WLAN_EID_MULTI_BAND = 158,
+	WLAN_EID_ADDBA_EXT = 159,
+	WLAN_EID_NEXT_PCP_LIST = 160,
+	WLAN_EID_PCP_HANDOVER = 161,
+	WLAN_EID_DMG_LINK_MARGIN = 162,
+	WLAN_EID_SWITCHING_STREAM = 163,
+	WLAN_EID_SESSION_TRANSITION = 164,
+	WLAN_EID_DYN_TONE_PAIRING_REPORT = 165,
+	WLAN_EID_CLUSTER_REPORT = 166,
+	WLAN_EID_RELAY_CAP = 167,
+	WLAN_EID_RELAY_XFER_PARAM_SET = 168,
+	WLAN_EID_BEAM_LINK_MAINT = 169,
+	WLAN_EID_MULTIPLE_MAC_ADDR = 170,
+	WLAN_EID_U_PID = 171,
+	WLAN_EID_DMG_LINK_ADAPT_ACK = 172,
+	WLAN_EID_QUIET_PERIOD_REQ = 175,
+	WLAN_EID_QUIET_PERIOD_RESP = 177,
+	WLAN_EID_EPAC_POLICY = 182,
+	WLAN_EID_CLISTER_TIME_OFF = 183,
+	WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190,
 };
 
 /* Action category code */
@@ -1368,7 +1522,10 @@ enum ieee80211_category {
 	WLAN_CATEGORY_MESH_ACTION = 13,
 	WLAN_CATEGORY_MULTIHOP_ACTION = 14,
 	WLAN_CATEGORY_SELF_PROTECTED = 15,
+	WLAN_CATEGORY_DMG = 16,
 	WLAN_CATEGORY_WMM = 17,
+	WLAN_CATEGORY_FST = 18,
+	WLAN_CATEGORY_UNPROT_DMG = 20,
 	WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
 	WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
 };
@@ -1616,6 +1773,7 @@ enum ieee80211_sa_query_action {
 #define WLAN_CIPHER_SUITE_CCMP		0x000FAC04
 #define WLAN_CIPHER_SUITE_WEP104	0x000FAC05
 #define WLAN_CIPHER_SUITE_AES_CMAC	0x000FAC06
+#define WLAN_CIPHER_SUITE_GCMP		0x000FAC08
 
 #define WLAN_CIPHER_SUITE_SMS4		0x00147201
 
diff --git a/include/linux/nfc.h b/include/linux/nfc.h
index f4e6dd915b1..6189f27e305 100644
--- a/include/linux/nfc.h
+++ b/include/linux/nfc.h
@@ -136,8 +136,9 @@ enum nfc_attrs {
 #define NFC_PROTO_FELICA	3
 #define NFC_PROTO_ISO14443	4
 #define NFC_PROTO_NFC_DEP	5
+#define NFC_PROTO_ISO14443_B	6
 
-#define NFC_PROTO_MAX		6
+#define NFC_PROTO_MAX		7
 
 /* NFC communication modes */
 #define NFC_COMM_ACTIVE  0
@@ -149,11 +150,12 @@ enum nfc_attrs {
 #define NFC_RF_NONE      2
 
 /* NFC protocols masks used in bitsets */
-#define NFC_PROTO_JEWEL_MASK	(1 << NFC_PROTO_JEWEL)
-#define NFC_PROTO_MIFARE_MASK	(1 << NFC_PROTO_MIFARE)
-#define NFC_PROTO_FELICA_MASK	(1 << NFC_PROTO_FELICA)
-#define NFC_PROTO_ISO14443_MASK	(1 << NFC_PROTO_ISO14443)
-#define NFC_PROTO_NFC_DEP_MASK	(1 << NFC_PROTO_NFC_DEP)
+#define NFC_PROTO_JEWEL_MASK      (1 << NFC_PROTO_JEWEL)
+#define NFC_PROTO_MIFARE_MASK     (1 << NFC_PROTO_MIFARE)
+#define NFC_PROTO_FELICA_MASK	  (1 << NFC_PROTO_FELICA)
+#define NFC_PROTO_ISO14443_MASK	  (1 << NFC_PROTO_ISO14443)
+#define NFC_PROTO_NFC_DEP_MASK	  (1 << NFC_PROTO_NFC_DEP)
+#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
 
 struct sockaddr_nfc {
 	sa_family_t sa_family;
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c0fc5d27733..db961a59247 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1638,12 +1638,20 @@ struct nl80211_sta_flag_update {
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
  * when getting information about the bitrate of a station.
+ * There are 2 attributes for bitrate, a legacy one that represents
+ * a 16-bit value, and new one that represents a 32-bit value.
+ * If the rate value fits into 16 bit, both attributes are reported
+ * with the same value. If the rate is too high to fit into 16 bits
+ * (>6.5535Gbps) only 32-bit attribute is included.
+ * User space tools encouraged to use the 32-bit attribute and fall
+ * back to the 16-bit one for compatibility with older kernels.
  *
  * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
  * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
  * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
  * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
+ * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s)
  * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
@@ -1653,6 +1661,7 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_MCS,
 	NL80211_RATE_INFO_40_MHZ_WIDTH,
 	NL80211_RATE_INFO_SHORT_GI,
+	NL80211_RATE_INFO_BITRATE32,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -1813,6 +1822,9 @@ enum nl80211_mpath_info {
  * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
  * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
+ * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
+ *	defined in 802.11ac
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -1826,6 +1838,9 @@ enum nl80211_band_attr {
 	NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
 	NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
 
+	NL80211_BAND_ATTR_VHT_MCS_SET,
+	NL80211_BAND_ATTR_VHT_CAPA,
+
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
 	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
@@ -2539,10 +2554,12 @@ enum nl80211_tx_rate_attributes {
  * enum nl80211_band - Frequency band
  * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
  * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
  */
 enum nl80211_band {
 	NL80211_BAND_2GHZ,
 	NL80211_BAND_5GHZ,
+	NL80211_BAND_60GHZ,
 };
 
 /**
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 061c01957e5..51f67a9003a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -70,11 +70,13 @@
  *
  * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band
  * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7)
+ * @IEEE80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz)
  * @IEEE80211_NUM_BANDS: number of defined bands
  */
 enum ieee80211_band {
 	IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ,
 	IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ,
+	IEEE80211_BAND_60GHZ = NL80211_BAND_60GHZ,
 
 	/* keep last */
 	IEEE80211_NUM_BANDS
@@ -211,6 +213,22 @@ struct ieee80211_sta_ht_cap {
 };
 
 /**
+ * struct ieee80211_sta_vht_cap - STA's VHT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ac VHT capabilities for an STA.
+ *
+ * @vht_supported: is VHT supported by the STA
+ * @cap: VHT capabilities map as described in 802.11ac spec
+ * @vht_mcs: Supported VHT MCS rates
+ */
+struct ieee80211_sta_vht_cap {
+	bool vht_supported;
+	u32 cap; /* use IEEE80211_VHT_CAP_ */
+	struct ieee80211_vht_mcs_info vht_mcs;
+};
+
+/**
  * struct ieee80211_supported_band - frequency band definition
  *
  * This structure describes a frequency band a wiphy
@@ -233,6 +251,7 @@ struct ieee80211_supported_band {
 	int n_channels;
 	int n_bitrates;
 	struct ieee80211_sta_ht_cap ht_cap;
+	struct ieee80211_sta_vht_cap vht_cap;
 };
 
 /*
@@ -561,11 +580,13 @@ enum station_info_flags {
  * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
  * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
  * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ * @RATE_INFO_FLAGS_60G: 60gHz MCS
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS		= 1<<0,
 	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
 	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
+	RATE_INFO_FLAGS_60G		= 1<<3,
 };
 
 /**
@@ -1482,9 +1503,8 @@ struct cfg80211_gtk_rekey_data {
  *	interfaces are active this callback should reject the configuration.
  *	If no interfaces are active or the device is down, the channel should
  *	be stored for when a monitor interface becomes active.
- * @get_channel: Get the current operating channel, should return %NULL if
- *	there's no single defined operating channel if for example the
- *	device implements channel hopping for multi-channel virtual interfaces.
+ * @set_monitor_enabled: Notify driver that there are only monitor
+ *	interfaces running.
  *
  * @scan: Request to do a scan. If returning zero, the scan request is given
  *	the driver, and will be valid until passed to cfg80211_scan_done().
@@ -1791,15 +1811,14 @@ struct cfg80211_ops {
 				  struct net_device *dev,
 				  u16 noack_map);
 
-	struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy,
-					       enum nl80211_channel_type *type);
-
 	int	(*get_et_sset_count)(struct wiphy *wiphy,
 				     struct net_device *dev, int sset);
 	void	(*get_et_stats)(struct wiphy *wiphy, struct net_device *dev,
 				struct ethtool_stats *stats, u64 *data);
 	void	(*get_et_strings)(struct wiphy *wiphy, struct net_device *dev,
 				  u32 sset, u8 *data);
+
+	void (*set_monitor_enabled)(struct wiphy *wiphy, bool enabled);
 };
 
 /*
@@ -2153,7 +2172,9 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+#ifdef CONFIG_PM
 	struct wiphy_wowlan_support wowlan;
+#endif
 
 	u16 max_remain_on_channel_duration;
 
@@ -2389,6 +2410,11 @@ struct wireless_dev {
 	struct ieee80211_channel *preset_chan;
 	enum nl80211_channel_type preset_chantype;
 
+	/* for AP and mesh channel tracking */
+	struct ieee80211_channel *channel;
+
+	bool ibss_fixed;
+
 	bool ps;
 	int ps_timeout;
 
@@ -3463,7 +3489,7 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq,
  *
  * return 0 if MCS index >= 32
  */
-u16 cfg80211_calculate_bitrate(struct rate_info *rate);
+u32 cfg80211_calculate_bitrate(struct rate_info *rate);
 
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 670a58ba8a4..e3fa90ce9ec 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -475,7 +475,7 @@ enum mac80211_rate_control_flags {
 #define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
 
 /* maximum number of rate stages */
-#define IEEE80211_TX_MAX_RATES	5
+#define IEEE80211_TX_MAX_RATES	4
 
 /**
  * struct ieee80211_tx_rate - rate selection/status
@@ -563,11 +563,11 @@ struct ieee80211_tx_info {
 		} control;
 		struct {
 			struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
-			u8 ampdu_ack_len;
 			int ack_signal;
+			u8 ampdu_ack_len;
 			u8 ampdu_len;
 			u8 antenna;
-			/* 14 bytes free */
+			/* 21 bytes free */
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[
@@ -634,7 +634,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
 		info->status.rates[i].count = 0;
 
 	BUILD_BUG_ON(
-	    offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+	    offsetof(struct ieee80211_tx_info, status.ack_signal) != 20);
 	memset(&info->status.ampdu_ack_len, 0,
 	       sizeof(struct ieee80211_tx_info) -
 	       offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
@@ -1896,19 +1896,6 @@ enum ieee80211_rate_control_changed {
  *	The low-level driver should send the frame out based on
  *	configuration in the TX control data. This handler should,
  *	preferably, never fail and stop queues appropriately.
- *	This must be implemented if @tx_frags is not.
- *	Must be atomic.
- *
- * @tx_frags: Called to transmit multiple fragments of a single MSDU.
- *	This handler must consume all fragments, sending out some of
- *	them only is useless and it can't ask for some of them to be
- *	queued again. If the frame is not fragmented the queue has a
- *	single SKB only. To avoid issues with the networking stack
- *	when TX status is reported the frames should be removed from
- *	the skb queue.
- *	If this is used, the tx_info @vif and @sta pointers will be
- *	invalid -- you must not use them in that case.
- *	This must be implemented if @tx isn't.
  *	Must be atomic.
  *
  * @start: Called before the first netdevice attached to the hardware
@@ -2257,11 +2244,21 @@ enum ieee80211_rate_control_changed {
  * @get_rssi: Get current signal strength in dBm, the function is optional
  *	and can sleep.
  *
+ * @mgd_prepare_tx: Prepare for transmitting a management frame for association
+ *	before associated. In multi-channel scenarios, a virtual interface is
+ *	bound to a channel before it is associated, but as it isn't associated
+ *	yet it need not necessarily be given airtime, in particular since any
+ *	transmission to a P2P GO needs to be synchronized against the GO's
+ *	powersave state. mac80211 will call this function before transmitting a
+ *	management frame prior to having successfully associated to allow the
+ *	driver to give it channel time for the transmission, to get a response
+ *	and to be able to synchronize with the GO.
+ *	The callback will be called before each transmission and upon return
+ *	mac80211 will transmit the frame right away.
+ *	The callback is optional and can (should!) sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
-	void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			 struct ieee80211_sta *sta, struct sk_buff_head *skbs);
 	int (*start)(struct ieee80211_hw *hw);
 	void (*stop)(struct ieee80211_hw *hw);
 #ifdef CONFIG_PM
@@ -2398,6 +2395,9 @@ struct ieee80211_ops {
 				  u32 sset, u8 *data);
 	int	(*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, s8 *rssi_dbm);
+
+	void	(*mgd_prepare_tx)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif);
 };
 
 /**
@@ -3832,12 +3832,6 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
 
 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
 
-int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
-			    struct sk_buff *skb, bool need_basic);
-
-int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
-				struct sk_buff *skb, bool need_basic);
-
 /**
  * ieee80211_ave_rssi - report the average rssi for the specified interface
  *
diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h
index e30e6a86971..f5169b04f08 100644
--- a/include/net/nfc/hci.h
+++ b/include/net/nfc/hci.h
@@ -44,10 +44,20 @@ struct nfc_hci_ops {
 			      struct nfc_target *target);
 };
 
-#define NFC_HCI_MAX_CUSTOM_GATES	15
+/* Pipes */
+#define NFC_HCI_INVALID_PIPE	0x80
+#define NFC_HCI_LINK_MGMT_PIPE	0x00
+#define NFC_HCI_ADMIN_PIPE	0x01
+
+struct nfc_hci_gate {
+	u8 gate;
+	u8 pipe;
+};
+
+#define NFC_HCI_MAX_CUSTOM_GATES	50
 struct nfc_hci_init_data {
 	u8 gate_count;
-	u8 gates[NFC_HCI_MAX_CUSTOM_GATES];
+	struct nfc_hci_gate gates[NFC_HCI_MAX_CUSTOM_GATES];
 	char session_id[9];
 };
 
@@ -112,6 +122,8 @@ void nfc_hci_unregister_device(struct nfc_hci_dev *hdev);
 void nfc_hci_set_clientdata(struct nfc_hci_dev *hdev, void *clientdata);
 void *nfc_hci_get_clientdata(struct nfc_hci_dev *hdev);
 
+void nfc_hci_driver_failure(struct nfc_hci_dev *hdev, int err);
+
 /* Host IDs */
 #define NFC_HCI_HOST_CONTROLLER_ID	0x00
 #define NFC_HCI_TERMINAL_HOST_ID	0x01
@@ -180,7 +192,8 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event,
 void nfc_hci_recv_frame(struct nfc_hci_dev *hdev, struct sk_buff *skb);
 
 /* connecting to gates and sending hci instructions */
-int nfc_hci_connect_gate(struct nfc_hci_dev *hdev, u8 dest_host, u8 dest_gate);
+int nfc_hci_connect_gate(struct nfc_hci_dev *hdev, u8 dest_host, u8 dest_gate,
+			 u8 pipe);
 int nfc_hci_disconnect_gate(struct nfc_hci_dev *hdev, u8 gate);
 int nfc_hci_disconnect_all_gates(struct nfc_hci_dev *hdev);
 int nfc_hci_get_param(struct nfc_hci_dev *hdev, u8 gate, u8 idx,
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 180964b954a..6431f5e3902 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -204,4 +204,6 @@ int nfc_tm_activated(struct nfc_dev *dev, u32 protocol, u8 comm_mode,
 int nfc_tm_deactivated(struct nfc_dev *dev);
 int nfc_tm_data_received(struct nfc_dev *dev, struct sk_buff *skb);
 
+void nfc_driver_failure(struct nfc_dev *dev, int err);
+
 #endif /* __NET_NFC_H */