Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits)
  USB: mos7840: add device IDs for B&B electronics devices
  USB: ftdi_sio: add USB device ID's for B&B Electronics line
  USB: musb: musb_host: fix sparse warning
  USB: musb: musb_gadget: fix sparse warning
  USB: musb: omap2430: fix sparse warning
  USB: core: message: fix sparse warning
  USB: core: hub: fix sparse warning
  USB: core: fix sparse warning for static function
  USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
  USB: Check bandwidth when switching alt settings.
  USB: Refactor code to find alternate interface settings.
  USB: xhci: Fix command completion after a drop endpoint.
  USB: xhci: Make reverting an alt setting "unfailable".
  USB: usbtmc: Use usb_clear_halt() instead of custom code.
  USB: xhci: Add correct email and files to MAINTAINERS entry.
  USB: ehci-omap.c: introduce missing kfree
  USB: xhci-mem.c: introduce missing kfree
  USB: add remove_id sysfs attr for usb drivers
  USB: g_multi kconfig: fix depends and help text
  USB: option: add pid for ZTE
  ...

5 files changed, 93 insertions, 20 deletions

diff --git a/include/linux/usb.h b/include/linux/usb.h
index a34fa89f147..e101a2d04d7 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -331,6 +331,7 @@ struct usb_bus {
 	u8 otg_port;			/* 0, or number of OTG/HNP port */
 	unsigned is_b_host:1;		/* true during some HNP roleswitches */
 	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
+	unsigned sg_tablesize;		/* 0 or largest number of sg list entries */
 
 	int devnum_next;		/* Next open device number in
 					 * round-robin allocation */
@@ -428,11 +429,9 @@ struct usb_tt;
  * @last_busy: time of last use
  * @autosuspend_delay: in jiffies
  * @connect_time: time device was first connected
- * @auto_pm: autosuspend/resume in progress
  * @do_remote_wakeup:  remote wakeup should be enabled
  * @reset_resume: needs reset instead of resume
  * @autosuspend_disabled: autosuspend disabled by the user
- * @autoresume_disabled: autoresume disabled by the user
  * @skip_sys_resume: skip the next system resume
  * @wusb_dev: if this is a Wireless USB device, link to the WUSB
  *	specific data for the device.
@@ -513,11 +512,9 @@ struct usb_device {
 	int autosuspend_delay;
 	unsigned long connect_time;
 
-	unsigned auto_pm:1;
 	unsigned do_remote_wakeup:1;
 	unsigned reset_resume:1;
 	unsigned autosuspend_disabled:1;
-	unsigned autoresume_disabled:1;
 	unsigned skip_sys_resume:1;
 #endif
 	struct wusb_dev *wusb_dev;
@@ -543,22 +540,20 @@ extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id);
 
 /* USB autosuspend and autoresume */
 #ifdef CONFIG_USB_SUSPEND
-extern int usb_autopm_set_interface(struct usb_interface *intf);
 extern int usb_autopm_get_interface(struct usb_interface *intf);
 extern void usb_autopm_put_interface(struct usb_interface *intf);
 extern int usb_autopm_get_interface_async(struct usb_interface *intf);
 extern void usb_autopm_put_interface_async(struct usb_interface *intf);
 
-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+		struct usb_interface *intf)
 {
-	atomic_set(&intf->pm_usage_cnt, 0);
-	usb_autopm_set_interface(intf);
+	atomic_inc(&intf->pm_usage_cnt);
 }
-
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_no_suspend(
+		struct usb_interface *intf)
 {
-	atomic_set(&intf->pm_usage_cnt, 1);
-	usb_autopm_set_interface(intf);
+	atomic_dec(&intf->pm_usage_cnt);
 }
 
 static inline void usb_mark_last_busy(struct usb_device *udev)
@@ -568,12 +563,8 @@ static inline void usb_mark_last_busy(struct usb_device *udev)
 
 #else
 
-static inline int usb_autopm_set_interface(struct usb_interface *intf)
-{ return 0; }
-
 static inline int usb_autopm_get_interface(struct usb_interface *intf)
 { return 0; }
-
 static inline int usb_autopm_get_interface_async(struct usb_interface *intf)
 { return 0; }
 
@@ -581,9 +572,11 @@ static inline void usb_autopm_put_interface(struct usb_interface *intf)
 { }
 static inline void usb_autopm_put_interface_async(struct usb_interface *intf)
 { }
-static inline void usb_autopm_enable(struct usb_interface *intf)
+static inline void usb_autopm_get_interface_no_resume(
+		struct usb_interface *intf)
 { }
-static inline void usb_autopm_disable(struct usb_interface *intf)
+static inline void usb_autopm_put_interface_no_suspend(
+		struct usb_interface *intf)
 { }
 static inline void usb_mark_last_busy(struct usb_device *udev)
 { }
@@ -626,6 +619,10 @@ extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
 		unsigned ifnum);
 extern struct usb_host_interface *usb_altnum_to_altsetting(
 		const struct usb_interface *intf, unsigned int altnum);
+extern struct usb_host_interface *usb_find_alt_setting(
+		struct usb_host_config *config,
+		unsigned int iface_num,
+		unsigned int alt_num);
 
 
 /**
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 4f6bb3d2160..738ea1a691c 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -127,6 +127,7 @@ struct usb_function {
 	/* private: */
 	/* internals */
 	struct list_head		list;
+	DECLARE_BITMAP(endpoints, 32);
 };
 
 int usb_add_function(struct usb_configuration *, struct usb_function *);
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 2443c0e7a80..52bb917641f 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -33,6 +33,23 @@ enum usb_otg_state {
 	OTG_STATE_A_VBUS_ERR,
 };
 
+#define USB_OTG_PULLUP_ID		(1 << 0)
+#define USB_OTG_PULLDOWN_DP		(1 << 1)
+#define USB_OTG_PULLDOWN_DM		(1 << 2)
+#define USB_OTG_EXT_VBUS_INDICATOR	(1 << 3)
+#define USB_OTG_DRV_VBUS		(1 << 4)
+#define USB_OTG_DRV_VBUS_EXT		(1 << 5)
+
+struct otg_transceiver;
+
+/* for transceivers connected thru an ULPI interface, the user must
+ * provide access ops
+ */
+struct otg_io_access_ops {
+	int (*read)(struct otg_transceiver *otg, u32 reg);
+	int (*write)(struct otg_transceiver *otg, u32 val, u32 reg);
+};
+
 /*
  * the otg driver needs to interact with both device side and host side
  * usb controllers.  it decides which controller is active at a given
@@ -42,6 +59,7 @@ enum usb_otg_state {
 struct otg_transceiver {
 	struct device		*dev;
 	const char		*label;
+	unsigned int		 flags;
 
 	u8			default_a;
 	enum usb_otg_state	state;
@@ -49,10 +67,17 @@ struct otg_transceiver {
 	struct usb_bus		*host;
 	struct usb_gadget	*gadget;
 
+	struct otg_io_access_ops	*io_ops;
+	void __iomem			*io_priv;
+
 	/* to pass extra port status to the root hub */
 	u16			port_status;
 	u16			port_change;
 
+	/* initialize/shutdown the OTG controller */
+	int	(*init)(struct otg_transceiver *otg);
+	void	(*shutdown)(struct otg_transceiver *otg);
+
 	/* bind/unbind the host controller */
 	int	(*set_host)(struct otg_transceiver *otg,
 				struct usb_bus *host);
@@ -65,6 +90,10 @@ struct otg_transceiver {
 	int	(*set_power)(struct otg_transceiver *otg,
 				unsigned mA);
 
+	/* effective for A-peripheral, ignored for B devices */
+	int	(*set_vbus)(struct otg_transceiver *otg,
+				bool enabled);
+
 	/* for non-OTG B devices: set transceiver into suspend mode */
 	int	(*set_suspend)(struct otg_transceiver *otg,
 				int suspend);
@@ -85,6 +114,38 @@ extern int otg_set_transceiver(struct otg_transceiver *);
 extern void usb_nop_xceiv_register(void);
 extern void usb_nop_xceiv_unregister(void);
 
+/* helpers for direct access thru low-level io interface */
+static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
+{
+	if (otg->io_ops && otg->io_ops->read)
+		return otg->io_ops->read(otg, reg);
+
+	return -EINVAL;
+}
+
+static inline int otg_io_write(struct otg_transceiver *otg, u32 reg, u32 val)
+{
+	if (otg->io_ops && otg->io_ops->write)
+		return otg->io_ops->write(otg, reg, val);
+
+	return -EINVAL;
+}
+
+static inline int
+otg_init(struct otg_transceiver *otg)
+{
+	if (otg->init)
+		return otg->init(otg);
+
+	return 0;
+}
+
+static inline void
+otg_shutdown(struct otg_transceiver *otg)
+{
+	if (otg->shutdown)
+		otg->shutdown(otg);
+}
 
 /* for usb host and peripheral controller drivers */
 extern struct otg_transceiver *otg_get_transceiver(void);
@@ -97,6 +158,12 @@ otg_start_hnp(struct otg_transceiver *otg)
 	return otg->start_hnp(otg);
 }
 
+/* Context: can sleep */
+static inline int
+otg_set_vbus(struct otg_transceiver *otg, bool enabled)
+{
+	return otg->set_vbus(otg, enabled);
+}
 
 /* for HCDs */
 static inline int
@@ -105,7 +172,6 @@ otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 	return otg->set_host(otg, host);
 }
 
-
 /* for usb peripheral controller drivers */
 
 /* Context: can sleep */
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
new file mode 100644
index 00000000000..20675c6ebc4
--- /dev/null
+++ b/include/linux/usb/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __LINUX_USB_ULPI_H
+#define __LINUX_USB_ULPI_H
+
+struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
+					unsigned int flags);
+
+#endif /* __LINUX_USB_ULPI_H */
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 3d15fb9bc11..a4b947e470a 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -56,7 +56,9 @@
 	US_FLAG(SANE_SENSE,     0x00008000)			\
 		/* Sane Sense (> 18 bytes) */			\
 	US_FLAG(CAPACITY_OK,	0x00010000)			\
-		/* READ CAPACITY response is correct */
+		/* READ CAPACITY response is correct */		\
+	US_FLAG(BAD_SENSE,	0x00020000)			\
+		/* Bad Sense (never more than 18 bytes) */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };