Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

3 files changed, 245 insertions, 86 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e5f085c8922..970da442067 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -281,9 +281,13 @@ struct ieee80211_supported_band {
 /**
  * struct vif_params - describes virtual interface parameters
  * @use_4addr: use 4-address frames
+ * @macaddr: address to use for this virtual interface. This will only
+ * 	be used for non-netdevice interfaces. If this parameter is set
+ * 	to zero address the driver may determine the address as needed.
  */
 struct vif_params {
        int use_4addr;
+       u8 macaddr[ETH_ALEN];
 };
 
 /**
@@ -326,7 +330,7 @@ struct cfg80211_chan_def {
  * cfg80211_get_chandef_type - return old channel type from chandef
  * @chandef: the channel definition
  *
- * Returns the old channel type (NOHT, HT20, HT40+/-) from a given
+ * Return: The old channel type (NOHT, HT20, HT40+/-) from a given
  * chandef, which must have a bandwidth allowing this conversion.
  */
 static inline enum nl80211_channel_type
@@ -364,7 +368,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
  * @chandef1: first channel definition
  * @chandef2: second channel definition
  *
- * Returns %true if the channels defined by the channel definitions are
+ * Return: %true if the channels defined by the channel definitions are
  * identical, %false otherwise.
  */
 static inline bool
@@ -382,7 +386,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1,
  * @chandef1: first channel definition
  * @chandef2: second channel definition
  *
- * Returns %NULL if the given channel definitions are incompatible,
+ * Return: %NULL if the given channel definitions are incompatible,
  * chandef1 or chandef2 otherwise.
  */
 const struct cfg80211_chan_def *
@@ -392,6 +396,7 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1,
 /**
  * cfg80211_chandef_valid - check if a channel definition is valid
  * @chandef: the channel definition to check
+ * Return: %true if the channel definition is valid. %false otherwise.
  */
 bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef);
 
@@ -399,7 +404,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef);
  * cfg80211_chandef_usable - check if secondary channels can be used
  * @wiphy: the wiphy to validate against
  * @chandef: the channel definition to check
- * @prohibited_flags: the regulatory chanenl flags that must not be set
+ * @prohibited_flags: the regulatory channel flags that must not be set
+ * Return: %true if secondary channels are usable. %false otherwise.
  */
 bool cfg80211_chandef_usable(struct wiphy *wiphy,
 			     const struct cfg80211_chan_def *chandef,
@@ -608,6 +614,8 @@ enum station_parameters_apply_mask {
  * @sta_modify_mask: bitmap indicating which parameters changed
  *	(for those that don't have a natural "no change" value),
  *	see &enum station_parameters_apply_mask
+ * @local_pm: local link-specific mesh power save mode (no change when set
+ *	to unknown)
  */
 struct station_parameters {
 	u8 *supported_rates;
@@ -623,6 +631,7 @@ struct station_parameters {
 	struct ieee80211_vht_cap *vht_capa;
 	u8 uapsd_queues;
 	u8 max_sp;
+	enum nl80211_mesh_power_mode local_pm;
 };
 
 /**
@@ -653,6 +662,9 @@ struct station_parameters {
  * @STATION_INFO_STA_FLAGS: @sta_flags filled
  * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
  * @STATION_INFO_T_OFFSET: @t_offset filled
+ * @STATION_INFO_LOCAL_PM: @local_pm filled
+ * @STATION_INFO_PEER_PM: @peer_pm filled
+ * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -676,6 +688,9 @@ enum station_info_flags {
 	STATION_INFO_STA_FLAGS		= 1<<18,
 	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
 	STATION_INFO_T_OFFSET		= 1<<20,
+	STATION_INFO_LOCAL_PM		= 1<<21,
+	STATION_INFO_PEER_PM		= 1<<22,
+	STATION_INFO_NONPEER_PM		= 1<<23,
 };
 
 /**
@@ -789,6 +804,9 @@ struct sta_bss_parameters {
  * @sta_flags: station flags mask & values
  * @beacon_loss_count: Number of times beacon loss event has triggered.
  * @t_offset: Time offset of the station relative to this host.
+ * @local_pm: local mesh STA power save mode
+ * @peer_pm: peer mesh STA power save mode
+ * @nonpeer_pm: non-peer mesh STA power save mode
  */
 struct station_info {
 	u32 filled;
@@ -818,6 +836,9 @@ struct station_info {
 
 	u32 beacon_loss_count;
 	s64 t_offset;
+	enum nl80211_mesh_power_mode local_pm;
+	enum nl80211_mesh_power_mode peer_pm;
+	enum nl80211_mesh_power_mode nonpeer_pm;
 
 	/*
 	 * Note: Add a new enum station_info_flags value for each new field and
@@ -993,6 +1014,10 @@ struct bss_parameters {
  * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs)
  *	during which a mesh STA can send only one Action frame containing
  *	a PREQ element for root path confirmation.
+ * @power_mode: The default mesh power save mode which will be the initial
+ *	setting for new peer links.
+ * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake
+ *	after transmitting its beacon.
  */
 struct mesh_config {
 	u16 dot11MeshRetryTimeout;
@@ -1020,6 +1045,8 @@ struct mesh_config {
 	u32 dot11MeshHWMPactivePathToRootTimeout;
 	u16 dot11MeshHWMProotInterval;
 	u16 dot11MeshHWMPconfirmationInterval;
+	enum nl80211_mesh_power_mode power_mode;
+	u16 dot11MeshAwakeWindowDuration;
 };
 
 /**
@@ -1034,6 +1061,8 @@ struct mesh_config {
  * @ie_len: length of vendor information elements
  * @is_authenticated: this mesh requires authentication
  * @is_secure: this mesh uses security
+ * @dtim_period: DTIM period to use
+ * @beacon_interval: beacon interval to use
  * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
  *
  * These parameters are fixed when the mesh is created.
@@ -1049,6 +1078,8 @@ struct mesh_setup {
 	u8 ie_len;
 	bool is_authenticated;
 	bool is_secure;
+	u8 dtim_period;
+	u16 beacon_interval;
 	int mcast_rate[IEEE80211_NUM_BANDS];
 };
 
@@ -1266,7 +1297,7 @@ struct cfg80211_bss {
  *
  * Note that the return value is an RCU-protected pointer, so
  * rcu_read_lock() must be held when calling this function.
- * Returns %NULL if not found.
+ * Return: %NULL if not found.
  */
 const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie);
 
@@ -1434,6 +1465,7 @@ struct cfg80211_ibss_params {
  * @ie: IEs for association request
  * @ie_len: Length of assoc_ie in octets
  * @privacy: indicates whether privacy-enabled APs should be used
+ * @mfp: indicate whether management frame protection is used
  * @crypto: crypto settings
  * @key_len: length of WEP key for shared key authentication
  * @key_idx: index of WEP key for shared key authentication
@@ -1454,6 +1486,7 @@ struct cfg80211_connect_params {
 	u8 *ie;
 	size_t ie_len;
 	bool privacy;
+	enum nl80211_mfp mfp;
 	struct cfg80211_crypto_settings crypto;
 	const u8 *key;
 	u8 key_len, key_idx;
@@ -2092,6 +2125,7 @@ struct ieee80211_iface_limit {
  * @beacon_int_infra_match: In this combination, the beacon intervals
  *	between infrastructure and AP types must match. This is required
  *	only in special cases.
+ * @radar_detect_widths: bitmap of channel widths supported for radar detection
  *
  * These examples can be expressed as follows:
  *
@@ -2144,6 +2178,7 @@ struct ieee80211_iface_combination {
 	u16 max_interfaces;
 	u8 n_limits;
 	bool beacon_int_infra_match;
+	u8 radar_detect_widths;
 };
 
 struct mac_address {
@@ -2364,8 +2399,8 @@ struct wiphy {
 	struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS];
 
 	/* Lets us get back the wiphy on the callback */
-	int (*reg_notifier)(struct wiphy *wiphy,
-			    struct regulatory_request *request);
+	void (*reg_notifier)(struct wiphy *wiphy,
+			     struct regulatory_request *request);
 
 	/* fields below are read-only, assigned by cfg80211 */
 
@@ -2409,6 +2444,7 @@ static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net)
  * wiphy_priv - return priv from wiphy
  *
  * @wiphy: the wiphy whose priv pointer to return
+ * Return: The priv of @wiphy.
  */
 static inline void *wiphy_priv(struct wiphy *wiphy)
 {
@@ -2420,6 +2456,7 @@ static inline void *wiphy_priv(struct wiphy *wiphy)
  * priv_to_wiphy - return the wiphy containing the priv
  *
  * @priv: a pointer previously returned by wiphy_priv
+ * Return: The wiphy of @priv.
  */
 static inline struct wiphy *priv_to_wiphy(void *priv)
 {
@@ -2442,6 +2479,7 @@ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev)
  * wiphy_dev - get wiphy dev pointer
  *
  * @wiphy: The wiphy whose device struct to look up
+ * Return: The dev of @wiphy.
  */
 static inline struct device *wiphy_dev(struct wiphy *wiphy)
 {
@@ -2452,6 +2490,7 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy)
  * wiphy_name - get wiphy name
  *
  * @wiphy: The wiphy whose name to return
+ * Return: The name of @wiphy.
  */
 static inline const char *wiphy_name(const struct wiphy *wiphy)
 {
@@ -2467,8 +2506,8 @@ static inline const char *wiphy_name(const struct wiphy *wiphy)
  * Create a new wiphy and associate the given operations with it.
  * @sizeof_priv bytes are allocated for private use.
  *
- * The returned pointer must be assigned to each netdev's
- * ieee80211_ptr for proper operation.
+ * Return: A pointer to the new wiphy. This pointer must be
+ * assigned to each netdev's ieee80211_ptr for proper operation.
  */
 struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
 
@@ -2477,7 +2516,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv);
  *
  * @wiphy: The wiphy to register.
  *
- * Returns a non-negative wiphy index or a negative error code.
+ * Return: A non-negative wiphy index or a negative error code.
  */
 extern int wiphy_register(struct wiphy *wiphy);
 
@@ -2626,6 +2665,7 @@ static inline u8 *wdev_address(struct wireless_dev *wdev)
  * wdev_priv - return wiphy priv from wireless_dev
  *
  * @wdev: The wireless device whose wiphy's priv pointer to return
+ * Return: The wiphy priv of @wdev.
  */
 static inline void *wdev_priv(struct wireless_dev *wdev)
 {
@@ -2643,12 +2683,14 @@ static inline void *wdev_priv(struct wireless_dev *wdev)
  * ieee80211_channel_to_frequency - convert channel number to frequency
  * @chan: channel number
  * @band: band, necessary due to channel number overlap
+ * Return: The corresponding frequency (in MHz), or 0 if the conversion failed.
  */
 extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band);
 
 /**
  * ieee80211_frequency_to_channel - convert frequency to channel number
  * @freq: center frequency
+ * Return: The corresponding channel, or 0 if the conversion failed.
  */
 extern int ieee80211_frequency_to_channel(int freq);
 
@@ -2665,6 +2707,7 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy,
  * ieee80211_get_channel - get channel struct from wiphy for specified frequency
  * @wiphy: the struct wiphy to get the channel for
  * @freq: the center frequency of the channel
+ * Return: The channel struct from @wiphy at @freq.
  */
 static inline struct ieee80211_channel *
 ieee80211_get_channel(struct wiphy *wiphy, int freq)
@@ -2679,10 +2722,10 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq)
  * @basic_rates: bitmap of basic rates
  * @bitrate: the bitrate for which to find the basic rate
  *
- * This function returns the basic rate corresponding to a given
- * bitrate, that is the next lower bitrate contained in the basic
- * rate map, which is, for this function, given as a bitmap of
- * indices of rates in the band's bitrate table.
+ * Return: The basic rate corresponding to a given bitrate, that
+ * is the next lower bitrate contained in the basic rate map,
+ * which is, for this function, given as a bitmap of indices of
+ * rates in the band's bitrate table.
  */
 struct ieee80211_rate *
 ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
@@ -2775,18 +2818,21 @@ extern const unsigned char bridge_tunnel_header[6];
 /**
  * ieee80211_get_hdrlen_from_skb - get header length from data
  *
+ * @skb: the frame
+ *
  * Given an skb with a raw 802.11 header at the data pointer this function
- * returns the 802.11 header length in bytes (not including encryption
- * headers). If the data in the sk_buff is too short to contain a valid 802.11
- * header the function returns 0.
+ * returns the 802.11 header length.
  *
- * @skb: the frame
+ * Return: The 802.11 header length in bytes (not including encryption
+ * headers). Or 0 if the data in the sk_buff is too short to contain a valid
+ * 802.11 header.
  */
 unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
 
 /**
  * ieee80211_hdrlen - get header length in bytes from frame control
  * @fc: frame control field in little-endian format
+ * Return: The header length in bytes.
  */
 unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
 
@@ -2794,7 +2840,7 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
  * ieee80211_get_mesh_hdrlen - get mesh extension header length
  * @meshhdr: the mesh extension header, only the flags field
  *	(first byte) will be accessed
- * Returns the length of the extension header, which is always at
+ * Return: The length of the extension header, which is always at
  * least 6 bytes and at most 18 if address 5 and 6 are present.
  */
 unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
@@ -2812,6 +2858,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
  * @skb: the 802.11 data frame
  * @addr: the device MAC address
  * @iftype: the virtual interface type
+ * Return: 0 on success. Non-zero on error.
  */
 int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
 			   enum nl80211_iftype iftype);
@@ -2823,6 +2870,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
  * @iftype: the virtual interface type
  * @bssid: the network bssid (used only for iftype STATION and ADHOC)
  * @qos: build 802.11 QoS data frame
+ * Return: 0 on success, or a negative error code.
  */
 int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
 			     enum nl80211_iftype iftype, u8 *bssid, bool qos);
@@ -2850,6 +2898,7 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list,
 /**
  * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame
  * @skb: the data frame
+ * Return: The 802.1p/1d tag.
  */
 unsigned int cfg80211_classify8021d(struct sk_buff *skb);
 
@@ -2860,12 +2909,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb);
  * @ies: data consisting of IEs
  * @len: length of data
  *
- * This function will return %NULL if the element ID could
- * not be found or if the element is invalid (claims to be
- * longer than the given data), or a pointer to the first byte
- * of the requested element, that is the byte containing the
- * element ID. There are no checks on the element length
- * other than having to fit into the given data.
+ * Return: %NULL if the element ID could not be found or if
+ * the element is invalid (claims to be longer than the given
+ * data), or a pointer to the first byte of the requested
+ * element, that is the byte containing the element ID.
+ *
+ * Note: There are no checks on the element length other than
+ * having to fit into the given data.
  */
 const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
 
@@ -2877,12 +2927,13 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len);
  * @ies: data consisting of IEs
  * @len: length of data
  *
- * This function will return %NULL if the vendor specific element ID
- * could not be found or if the element is invalid (claims to be
- * longer than the given data), or a pointer to the first byte
- * of the requested element, that is the byte containing the
- * element ID. There are no checks on the element length
- * other than having to fit into the given data.
+ * Return: %NULL if the vendor specific element ID could not be found or if the
+ * element is invalid (claims to be longer than the given data), or a pointer to
+ * the first byte of the requested element, that is the byte containing the
+ * element ID.
+ *
+ * Note: There are no checks on the element length other than having to fit into
+ * the given data.
  */
 const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
 				  const u8 *ies, int len);
@@ -2915,6 +2966,8 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
  *
  * Drivers should check the return value, its possible you can get
  * an -ENOMEM.
+ *
+ * Return: 0 on success. -ENOMEM.
  */
 extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
 
@@ -2944,13 +2997,13 @@ extern void wiphy_apply_custom_regulatory(
  * it wants to follow we respect that unless a country IE has been received
  * and processed already.
  *
- * When an error occurs, for example if no rule can be found, the return value
- * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain
- * the numeric return value. The numeric return value will be -ERANGE if we
- * determine the given center_freq does not even have a regulatory rule for a
- * frequency range in the center_freq's band. See freq_in_rule_band() for our
- * current definition of a band -- this is purely subjective and right now it's
- * 802.11 specific.
+ * Return: A valid pointer, or, when an error occurs, for example if no rule
+ * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to
+ * check and PTR_ERR() to obtain the numeric return value. The numeric return
+ * value will be -ERANGE if we determine the given center_freq does not even
+ * have a regulatory rule for a frequency range in the center_freq's band.
+ * See freq_in_rule_band() for our current definition of a band -- this is
+ * purely subjective and right now it's 802.11 specific.
  */
 const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy,
 					       u32 center_freq);
@@ -3000,7 +3053,8 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
  * This informs cfg80211 that BSS information was found and
  * the BSS should be updated/added.
  *
- * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
+ * Return: A referenced struct, must be released with cfg80211_put_bss()!
+ * Or %NULL on error.
  */
 struct cfg80211_bss * __must_check
 cfg80211_inform_bss_frame(struct wiphy *wiphy,
@@ -3025,7 +3079,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
  * This informs cfg80211 that BSS information was found and
  * the BSS should be updated/added.
  *
- * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()!
+ * Return: A referenced struct, must be released with cfg80211_put_bss()!
+ * Or %NULL on error.
  */
 struct cfg80211_bss * __must_check
 cfg80211_inform_bss(struct wiphy *wiphy,
@@ -3302,16 +3357,18 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy);
  * the testmode command. Since it is intended for a reply, calling
  * it outside of the @testmode_cmd operation is invalid.
  *
- * The returned skb (or %NULL if any errors happen) is pre-filled
- * with the wiphy index and set up in a way that any data that is
- * put into the skb (with skb_put(), nla_put() or similar) will end
- * up being within the %NL80211_ATTR_TESTDATA attribute, so all that
- * needs to be done with the skb is adding data for the corresponding
- * userspace tool which can then read that data out of the testdata
- * attribute. You must not modify the skb in any other way.
+ * The returned skb is pre-filled with the wiphy index and set up in
+ * a way that any data that is put into the skb (with skb_put(),
+ * nla_put() or similar) will end up being within the
+ * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done
+ * with the skb is adding data for the corresponding userspace tool
+ * which can then read that data out of the testdata attribute. You
+ * must not modify the skb in any other way.
  *
  * When done, call cfg80211_testmode_reply() with the skb and return
  * its error code as the result of the @testmode_cmd operation.
+ *
+ * Return: An allocated and pre-filled skb. %NULL if any errors happen.
  */
 struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
 						  int approxlen);
@@ -3321,11 +3378,12 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
  * @skb: The skb, must have been allocated with
  *	cfg80211_testmode_alloc_reply_skb()
  *
- * Returns an error code or 0 on success, since calling this
- * function will usually be the last thing before returning
- * from the @testmode_cmd you should return the error code.
- * Note that this function consumes the skb regardless of the
- * return value.
+ * Since calling this function will usually be the last thing
+ * before returning from the @testmode_cmd you should return
+ * the error code.  Note that this function consumes the skb
+ * regardless of the return value.
+ *
+ * Return: An error code or 0 on success.
  */
 int cfg80211_testmode_reply(struct sk_buff *skb);
 
@@ -3339,14 +3397,16 @@ int cfg80211_testmode_reply(struct sk_buff *skb);
  * This function allocates and pre-fills an skb for an event on the
  * testmode multicast group.
  *
- * The returned skb (or %NULL if any errors happen) is set up in the
- * same way as with cfg80211_testmode_alloc_reply_skb() but prepared
- * for an event. As there, you should simply add data to it that will
- * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must
- * not modify the skb in any other way.
+ * The returned skb is set up in the same way as with
+ * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As
+ * there, you should simply add data to it that will then end up in the
+ * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb
+ * in any other way.
  *
  * When done filling the skb, call cfg80211_testmode_event() with the
  * skb to send the event.
+ *
+ * Return: An allocated and pre-filled skb. %NULL if any errors happen.
  */
 struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
 						  int approxlen, gfp_t gfp);
@@ -3527,13 +3587,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr,
  * @len: length of the frame data
  * @gfp: context flags
  *
- * Returns %true if a user space application has registered for this frame.
+ * This function is called whenever an Action frame is received for a station
+ * mode interface, but is not processed in kernel.
+ *
+ * Return: %true if a user space application has registered for this frame.
  * For action frames, that makes it responsible for rejecting unrecognized
  * action frames; %false otherwise, in which case for action frames the
  * driver is responsible for rejecting the frame.
- *
- * This function is called whenever an Action frame is received for a station
- * mode interface, but is not processed in kernel.
  */
 bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm,
 		      const u8 *buf, size_t len, gfp_t gfp);
@@ -3625,7 +3685,7 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
  * This function is used in AP mode (only!) to inform userspace that
  * a spurious class 3 frame was received, to be able to deauth the
  * sender.
- * Returns %true if the frame was passed to userspace (or this failed
+ * Return: %true if the frame was passed to userspace (or this failed
  * for a reason other than not having a subscription.)
  */
 bool cfg80211_rx_spurious_frame(struct net_device *dev,
@@ -3641,7 +3701,7 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev,
  * an associated station sent a 4addr frame but that wasn't expected.
  * It is allowed and desirable to send this event only once for each
  * station to avoid event flooding.
- * Returns %true if the frame was passed to userspace (or this failed
+ * Return: %true if the frame was passed to userspace (or this failed
  * for a reason other than not having a subscription.)
  */
 bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
@@ -3679,8 +3739,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy,
  * @wiphy: the wiphy
  * @chandef: the channel definition
  *
- * This function returns true if there is no secondary channel or the secondary
- * channel(s) can be used for beaconing (i.e. is not a radar channel etc.)
+ * Return: %true if there is no secondary channel or the secondary channel(s)
+ * can be used for beaconing (i.e. is not a radar channel etc.)
  */
 bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
 			     struct cfg80211_chan_def *chandef);
@@ -3750,9 +3810,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev);
  * The function finds a given P2P attribute in the (vendor) IEs and
  * copies its contents to the given buffer.
  *
- * The return value is a negative error code (-%EILSEQ or -%ENOENT) if
- * the data is malformed or the attribute can't be found (respectively),
- * or the length of the found attribute (which can be zero).
+ * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is
+ * malformed or the attribute can't be found (respectively), or the
+ * length of the found attribute (which can be zero).
  */
 int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len,
 			  enum ieee80211_p2p_attr_id attr,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 23daed3c78e..3037f49e51c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1522,6 +1522,8 @@ struct ieee80211_hw {
  * structure can then access it via hw->priv. Note that mac802111 drivers should
  * not use wiphy_priv() to try to get their private driver structure as this
  * is already used internally by mac80211.
+ *
+ * Return: The mac80211 driver hw struct of @wiphy.
  */
 struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy);
 
@@ -2486,7 +2488,10 @@ enum ieee80211_rate_control_changed {
  *
  * @restart_complete: Called after a call to ieee80211_restart_hw(), when the
  *	reconfiguration has completed. This can help the driver implement the
- *	reconfiguration step. This callback may sleep.
+ *	reconfiguration step. Also called when reconfiguring because the
+ *	driver's resume function returned 1, as this is just like an "inline"
+ *	hardware restart. This callback may sleep.
+ *
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2673,6 +2678,8 @@ struct ieee80211_ops {
  *
  * @priv_data_len: length of private data
  * @ops: callbacks for this device
+ *
+ * Return: A pointer to the new hardware device, or %NULL on error.
  */
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 					const struct ieee80211_ops *ops);
@@ -2685,6 +2692,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
  * need to fill the contained wiphy's information.
  *
  * @hw: the device to register as returned by ieee80211_alloc_hw()
+ *
+ * Return: 0 on success. An error code otherwise.
  */
 int ieee80211_register_hw(struct ieee80211_hw *hw);
 
@@ -2731,6 +2740,8 @@ extern char *__ieee80211_create_tpt_led_trigger(
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
 {
@@ -2750,6 +2761,8 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
 {
@@ -2769,6 +2782,8 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
 {
@@ -2788,6 +2803,8 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
  * of the trigger so you can automatically link the LED device.
  *
  * @hw: the hardware to get the LED trigger name for
+ *
+ * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
 static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
 {
@@ -2805,9 +2822,10 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
  * @blink_table: the blink table -- needs to be ordered by throughput
  * @blink_table_len: size of the blink table
  *
- * This function returns %NULL (in case of error, or if no LED
- * triggers are configured) or the name of the new trigger.
- * This function must be called before ieee80211_register_hw().
+ * Return: %NULL (in case of error, or if no LED triggers are
+ * configured) or the name of the new trigger.
+ *
+ * Note: This function must be called before ieee80211_register_hw().
  */
 static inline char *
 ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
@@ -2940,10 +2958,10 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
  * Calls to this function for a single hardware must be synchronized against
  * each other.
  *
- * The function returns -EINVAL when the requested PS mode is already set.
- *
  * @sta: currently connected sta
  * @start: start or stop PS
+ *
+ * Return: 0 on success. -EINVAL when the requested PS mode is already set.
  */
 int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
 
@@ -2957,6 +2975,8 @@ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start);
  *
  * @sta: currently connected sta
  * @start: start or stop PS
+ *
+ * Return: Like ieee80211_sta_ps_transition().
  */
 static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta,
 						  bool start)
@@ -3094,6 +3114,8 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
  * according to the current DTIM parameters/TIM bitmap.
  *
  * The driver is responsible for freeing the returned skb.
+ *
+ * Return: The beacon template. %NULL on error.
  */
 struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 					 struct ieee80211_vif *vif,
@@ -3105,6 +3127,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
  * See ieee80211_beacon_get_tim().
+ *
+ * Return: See ieee80211_beacon_get_tim().
  */
 static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 						   struct ieee80211_vif *vif)
@@ -3121,6 +3145,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
  * hardware. The destination address should be set by the caller.
  *
  * Can only be called in AP mode.
+ *
+ * Return: The Probe Response template. %NULL on error.
  */
 struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif);
@@ -3136,6 +3162,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw,
  *
  * Note: Caller (or hardware) is responsible for setting the
  * &IEEE80211_FCTL_PM bit.
+ *
+ * Return: The PS Poll template. %NULL on error.
  */
 struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif);
@@ -3151,6 +3179,8 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw,
  *
  * Note: Caller (or hardware) is responsible for setting the
  * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields.
+ *
+ * Return: The nullfunc template. %NULL on error.
  */
 struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif);
@@ -3165,6 +3195,8 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
  *
  * Creates a Probe Request template which can, for example, be uploaded to
  * hardware.
+ *
+ * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
@@ -3200,6 +3232,8 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
  * If the RTS is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
  * the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_rts_duration(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif, size_t frame_len,
@@ -3235,6 +3269,8 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw,
  * If the CTS-to-self is generated in firmware, but the host system must provide
  * the duration field, the low-level driver uses this function to receive
  * the duration field value in little-endian byteorder.
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif,
@@ -3251,6 +3287,8 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw,
  *
  * Calculate the duration field of some generic frame, given its
  * length and transmission rate (in 100kbps).
+ *
+ * Return: The duration.
  */
 __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
 					struct ieee80211_vif *vif,
@@ -3267,9 +3305,10 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw,
  * hardware/firmware does not implement buffering of broadcast/multicast
  * frames when power saving is used, 802.11 code buffers them in the host
  * memory. The low-level driver uses this function to fetch next buffered
- * frame. In most cases, this is used when generating beacon frame. This
- * function returns a pointer to the next buffered skb or NULL if no more
- * buffered frames are available.
+ * frame. In most cases, this is used when generating beacon frame.
+ *
+ * Return: A pointer to the next buffered skb or NULL if no more buffered
+ * frames are available.
  *
  * Note: buffered frames are returned only after DTIM beacon frame was
  * generated with ieee80211_beacon_get() and the low-level driver must thus
@@ -3449,6 +3488,8 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
  * @queue: queue number (counted from zero).
  *
  * Drivers should use this function instead of netif_stop_queue.
+ *
+ * Return: %true if the queue is stopped. %false otherwise.
  */
 
 int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
@@ -3646,7 +3687,9 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
  * @vif: virtual interface to look for station on
  * @addr: station's address
  *
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  */
 struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
@@ -3659,7 +3702,9 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
  * @addr: remote station's address
  * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'.
  *
- * This function must be called under RCU lock and the
+ * Return: The station, if found. %NULL otherwise.
+ *
+ * Note: This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
  *
  * NOTE: You may pass NULL for localaddr, but then you will just get
@@ -3789,7 +3834,9 @@ void ieee80211_iter_chan_contexts_atomic(
  * information. This function must only be called from within the
  * .bss_info_changed callback function and only in managed mode. The function
  * is only useful when the interface is associated, otherwise it will return
- * NULL.
+ * %NULL.
+ *
+ * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
 					  struct ieee80211_vif *vif);
@@ -4136,12 +4183,14 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
 void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
 
 /**
- * ieee80211_ave_rssi - report the average rssi for the specified interface
+ * ieee80211_ave_rssi - report the average RSSI for the specified interface
  *
  * @vif: the specified virtual interface
  *
- * This function return the average rssi value for the requested interface.
- * It assumes that the given vif is valid.
+ * Note: This function assumes that the given vif is valid.
+ *
+ * Return: The average RSSI value for the requested interface, or 0 if not
+ * applicable.
  */
 int ieee80211_ave_rssi(struct ieee80211_vif *vif);
 
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 547017100a3..e6eeb4ba5dc 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -374,8 +374,8 @@
  *	requests to connect to a specified network but without separating
  *	auth and assoc steps. For this, you need to specify the SSID in a
  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
- *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
- *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
+ *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
+ *	%NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
  *	Background scan period can optionally be
@@ -958,7 +958,7 @@ enum nl80211_commands {
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *	used for the association (&enum nl80211_mfp, represented as a u32);
  *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE request
+ *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *	&struct nl80211_sta_flag_update.
@@ -1310,6 +1310,9 @@ enum nl80211_commands {
  *	if not given in START_AP 0 is assumed, if not given in SET_BSS
  *	no change is made.
  *
+ * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
+ *	defined in &enum nl80211_mesh_power_mode.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1580,6 +1583,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_P2P_CTWINDOW,
 	NL80211_ATTR_P2P_OPPPS,
 
+	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1838,6 +1843,10 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
  * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
+ * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode
+ * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
+ * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
+ *	non-peer STA
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1862,6 +1871,9 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_STA_FLAGS,
 	NL80211_STA_INFO_BEACON_LOSS,
 	NL80211_STA_INFO_T_OFFSET,
+	NL80211_STA_INFO_LOCAL_PM,
+	NL80211_STA_INFO_PEER_PM,
+	NL80211_STA_INFO_NONPEER_PM,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -2253,6 +2265,34 @@ enum nl80211_mntr_flags {
 };
 
 /**
+ * enum nl80211_mesh_power_mode - mesh power save modes
+ *
+ * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is
+ *	not known or has not been set yet.
+ * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is
+ *	in Awake state all the time.
+ * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will
+ *	alternate between Active and Doze states, but will wake up for
+ *	neighbor's beacons.
+ * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will
+ *	alternate between Active and Doze states, but may not wake up
+ *	for neighbor's beacons.
+ *
+ * @__NL80211_MESH_POWER_AFTER_LAST - internal use
+ * @NL80211_MESH_POWER_MAX - highest possible power save level
+ */
+
+enum nl80211_mesh_power_mode {
+	NL80211_MESH_POWER_UNKNOWN,
+	NL80211_MESH_POWER_ACTIVE,
+	NL80211_MESH_POWER_LIGHT_SLEEP,
+	NL80211_MESH_POWER_DEEP_SLEEP,
+
+	__NL80211_MESH_POWER_AFTER_LAST,
+	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
  * Mesh configuration parameters. These can be changed while the mesh is
@@ -2346,6 +2386,11 @@ enum nl80211_mntr_flags {
  *	(in TUs) during which a mesh STA can send only one Action frame
  *	containing a PREQ element for root path confirmation.
  *
+ * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links.
+ *	type &enum nl80211_mesh_power_mode (u32)
+ *
+ * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2375,6 +2420,8 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT,
 	NL80211_MESHCONF_HWMP_ROOT_INTERVAL,
 	NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
+	NL80211_MESHCONF_POWER_MODE,
+	NL80211_MESHCONF_AWAKE_WINDOW,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2937,6 +2984,8 @@ enum nl80211_iface_limit_attrs {
  *	the infrastructure network's beacon interval.
  * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
  *	different channels may be used within this group.
+ * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap
+ *	of supported channel widths for radar detection.
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -2969,6 +3018,7 @@ enum nl80211_if_combination_attrs {
 	NL80211_IFACE_COMB_MAXNUM,
 	NL80211_IFACE_COMB_STA_AP_BI_MATCH,
 	NL80211_IFACE_COMB_NUM_CHANNELS,
+	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
 
 	/* keep last */
 	NUM_NL80211_IFACE_COMB,