summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2009-09-22 16:46:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2009-09-23 07:39:44 -0700
commit568d0697f42771425ae9f1e9a3db769fef7e10b6 (patch)
tree8f4d1178b88481e3d3daba3e049c700a3cef72e4 /include
parent7869c0b9ed44404bbc675ef76f8ccb3be5496f39 (diff)
spi: handle TX-only/RX-only
Support two new half-duplex SPI implementation restrictions, for links that talk to TX-only or RX-only devices. (Existing half-duplex flavors support both transfer directions, just not at the same time.) Move spi_async() into the spi.c core, and stop inlining it. Then make that function perform error checks and reject messages that demand more than the underlying controller can support. Based on a patch from Marek Szyprowski which did this only for the bitbanged GPIO driver. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'include')
-rw-r--r--include/linux/spi/spi.h39
1 files changed, 3 insertions, 36 deletions
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index e2051f39f6a..97b60b37f44 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -258,6 +258,8 @@ struct spi_master {
/* other constraints relevant to this driver */
u16 flags;
#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */
+#define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */
+#define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */
/* Setup mode and clock, etc (spi driver may call many times).
*
@@ -538,42 +540,7 @@ static inline void spi_message_free(struct spi_message *m)
}
extern int spi_setup(struct spi_device *spi);
-
-/**
- * spi_async - asynchronous SPI transfer
- * @spi: device with which data will be exchanged
- * @message: describes the data transfers, including completion callback
- * Context: any (irqs may be blocked, etc)
- *
- * This call may be used in_irq and other contexts which can't sleep,
- * as well as from task contexts which can sleep.
- *
- * The completion callback is invoked in a context which can't sleep.
- * Before that invocation, the value of message->status is undefined.
- * When the callback is issued, message->status holds either zero (to
- * indicate complete success) or a negative error code. After that
- * callback returns, the driver which issued the transfer request may
- * deallocate the associated memory; it's no longer in use by any SPI
- * core or controller driver code.
- *
- * Note that although all messages to a spi_device are handled in
- * FIFO order, messages may go to different devices in other orders.
- * Some device might be higher priority, or have various "hard" access
- * time requirements, for example.
- *
- * On detection of any fault during the transfer, processing of
- * the entire message is aborted, and the device is deselected.
- * Until returning from the associated message completion callback,
- * no other spi_message queued to that device will be processed.
- * (This rule applies equally to all the synchronous transfer calls,
- * which are wrappers around this core asynchronous primitive.)
- */
-static inline int
-spi_async(struct spi_device *spi, struct spi_message *message)
-{
- message->spi = spi;
- return spi->master->transfer(spi, message);
-}
+extern int spi_async(struct spi_device *spi, struct spi_message *message);
/*---------------------------------------------------------------------------*/