pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.

The new ADI GPIO2 controller was introduced since the BF548 and BF60x
processors. It differs a lot from the old one on BF5xx processors. So,
create a pinctrl driver under the pinctrl framework.

- Define gpio ports and pin interrupt controllers as individual platform
  devices.
- Register a pinctrl driver for the whole GPIO ports and pin interrupt
  devices.
- Probe pint devices before port devices. Put device instances into
  the global gpio and pint lists.
- Define peripheral, irq and gpio reservation bit masks for each gpio
  port as runtime resources.
- Save and restore gpio port and pint status MMRs in syscore PM functions.
- Create the plug-in subdrivers to hold the pinctrl soc data for bf54x
  and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data
  in pin controller probe function. Get the pin groups and functions via
  the soc data reference.
- Call gpiochip_add_pin_range() in gpio device probe function to register
  range cross reference between gpio device and pin control device.
- Get range by pinctrl_find_gpio_range_from_pin(), find gpio_port object
  by container_of() and find adi_pinctrl by pin control device name.
- Handle peripheral and gpio requests in pinctrl operation functions.
- Demux gpio IRQs via the irq_domain created by each GPIO port.

v2-changes:
- Remove unlinke() directive.

v3-changes:
- Rename struct adi_pmx to adi_pinctrl.
- Fix the comments of struct gpio_pint.
- Remove unused pin_base in struct gpio_port.
- Change pint_assign into bool type.
- Add comments about the relationship between pint device and port device
to the driver header.
- Use BIT macro to shift bit.
- Remove all bitmap reservation help functions. Inline reservation functions
into the actual code.
- Remove gpio and offset mutual reference help functions.
- Remove all help functions to find gpio_port and adi_pinctrl structs. Get
range by pinctrl_find_gpio_range_from_pin(), find gpio_port object by
container_of() and find adi_pinctrl by pin control device name.
- Pass bool type usage variable to port_setup help function.
- Separate long bit operations into several lines and add comments.
- Use debugfs to output all GPIO request information.
- Avoid to set drvdata to NULL
- Add explanation to function adi_gpio_init_int()
- Call gpiochip_add_pin_range() in gpio device probe function to register
range cross reference between gpio device and pin control device.
- Remove the reference to pin control device from the gpio_port struct.
Remove the reference list to gpio device from the adi_pinctrl struct.
Replace the global adi_pinctrl list with adi_gpio_port_list. Walk through
the gpio list to do power suspend and resume operations.
- Remove the global GPIO base from struct adi_pinctrl, define pin base in
the platform data for each GPIO port device.
- Initialize adi_pinctrl_setup in arch_initcall().
- print the status of triggers, whether it is in GPIO mode, if it is
flagged to be used as IRQ, etc in adi_pin_dbg_show().
- Create the plug-in subdrivers to hold the pinctrl soc data for bf54x
and bf60x. Add soc data into struct adi_pinctrl. Initialize the soc data
in pin controller probe function. Get the pin groups and functions via
the soc data reference.

v4-changes:
- remove useless system_state checking.
- replace dev_err with dev_warn in both irq and gpio pin cases.
- comment on relationship between irq type and invert operation.
- It is not necessary to check the reservation mode of the requested
pin in IRQ chip operation. Remove the reservation map.
- Use existing gpio/pinctrl subsystem debugfs files. Remove pinctrl-adi2
driver specific debugfs output.
- Add linkport group and function information for bf60x.
- Separate uart and ctsrts pins into 2 groups.
- Separate APAPI and alternative ATAPI pins into 2 groups.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 40 insertions, 0 deletions

diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h
new file mode 100644
index 00000000000..8f91300617e
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-adi2.h
@@ -0,0 +1,40 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+
+#ifndef PINCTRL_ADI2_H
+#define PINCTRL_ADI2_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data
+ * for ADI GPIO2 device.
+ *
+ * @port_gpio_base: Optional global GPIO index of the GPIO bank.
+ *                 0 means driver decides.
+ * @port_pin_base: Pin index of the pin controller device.
+ * @port_width: PIN number of the GPIO bank device
+ * @pint_id: GPIO PINT device id that this GPIO bank should map to.
+ * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A
+ *               GPIO bank can be mapped into either low 16 bits[0] or high 16
+ *               bits[1] of each PINT register.
+ * @pint_map: GIOP bank mapping code in PINT device
+ */
+struct adi_pinctrl_gpio_platform_data {
+	unsigned int port_gpio_base;
+	unsigned int port_pin_base;
+	unsigned int port_width;
+	u8 pinctrl_id;
+	u8 pint_id;
+	bool pint_assign;
+	u8 pint_map;
+};
+
+#endif