iio: Added ST-sensors platform data to select the DRDY interrupt pin

This patch add support to redirect the DRDY interrupt on INT1 or INT2
on accelerometer and pressure sensors.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

2 files changed, 35 insertions, 3 deletions

diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 72b26940730..e51f65480ea 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -17,6 +17,8 @@
 #include <linux/iio/trigger.h>
 #include <linux/bitops.h>
 
+#include <linux/platform_data/st_sensors_pdata.h>
+
 #define ST_SENSORS_TX_MAX_LENGTH		2
 #define ST_SENSORS_RX_MAX_LENGTH		6
 
@@ -118,14 +120,16 @@ struct st_sensor_bdu {
 /**
  * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
  * @addr: address of the register.
- * @mask: mask to write the on/off value.
+ * @mask_int1: mask to enable/disable IRQ on INT1 pin.
+ * @mask_int2: mask to enable/disable IRQ on INT2 pin.
  * struct ig1 - represents the Interrupt Generator 1 of sensors.
  * @en_addr: address of the enable ig1 register.
  * @en_mask: mask to write the on/off value for enable.
  */
 struct st_sensor_data_ready_irq {
 	u8 addr;
-	u8 mask;
+	u8 mask_int1;
+	u8 mask_int2;
 	struct {
 		u8 en_addr;
 		u8 en_mask;
@@ -201,6 +205,7 @@ struct st_sensors {
  * @buffer_data: Data used by buffer part.
  * @odr: Output data rate of the sensor [Hz].
  * num_data_channels: Number of data channels used in buffer.
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
  * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
  * @tf: Transfer function structure used by I/O operations.
  * @tb: Transfer buffers and mutex used by I/O operations.
@@ -219,6 +224,8 @@ struct st_sensor_data {
 	unsigned int odr;
 	unsigned int num_data_channels;
 
+	u8 drdy_int_pin;
+
 	unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
 
 	const struct st_sensor_transfer_function *tf;
@@ -249,7 +256,8 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
 }
 #endif
 
-int st_sensors_init_sensor(struct iio_dev *indio_dev);
+int st_sensors_init_sensor(struct iio_dev *indio_dev,
+					struct st_sensors_platform_data *pdata);
 
 int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
 
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
new file mode 100644
index 00000000000..753839187ba
--- /dev/null
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -0,0 +1,24 @@
+/*
+ * STMicroelectronics sensors platform-data driver
+ *
+ * Copyright 2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_PDATA_H
+#define ST_SENSORS_PDATA_H
+
+/**
+ * struct st_sensors_platform_data - Platform data for the ST sensors
+ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ *	Available only for accelerometer and pressure sensors.
+ *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
+ */
+struct st_sensors_platform_data {
+	u8 drdy_int_pin;
+};
+
+#endif /* ST_SENSORS_PDATA_H */