[MIPS] Don't drag a platform specific header into generic arch code.

For some platforms it's definitions may conflict.  So that's the one-liner.
The rest is 10 square kilometers of collateral damage fixup this include
used to paper over.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

5 files changed, 9 insertions, 23 deletions

diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 91803ba30ff..3ca6a076124 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -72,4 +72,13 @@ extern int allocate_irqno(void);
 extern void alloc_legacy_irqno(void);
 extern void free_irqno(unsigned int irq);
 
+/*
+ * Before R2 the timer and performance counter interrupts were both fixed to
+ * IE7.  Since R2 their number has to be read from the c0_intctl register.
+ */
+#define CP0_LEGACY_COMPARE_IRQ 7
+
+extern int cp0_compare_irq;
+extern int cp0_perfcount_irq;
+
 #endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
index 76add42e486..93ba1c1b2a4 100644
--- a/include/asm-mips/mips-boards/atlasint.h
+++ b/include/asm-mips/mips-boards/atlasint.h
@@ -28,11 +28,6 @@
 
 #include <irq.h>
 
-/*
- * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
- */
-#define MIPSCPU_INT_BASE	MIPS_CPU_IRQ_BASE
-
 /* CPU interrupt offsets */
 #define MIPSCPU_INT_SW0		0
 #define MIPSCPU_INT_SW1		1
@@ -42,7 +37,6 @@
 #define MIPSCPU_INT_MB2		4
 #define MIPSCPU_INT_MB3		5
 #define MIPSCPU_INT_MB4		6
-#define MIPSCPU_INT_CPUCTR	7
 
 /*
  * Interrupts 8..39 are used for Atlas interrupt controller interrupts
diff --git a/include/asm-mips/mips-boards/maltaint.h b/include/asm-mips/mips-boards/maltaint.h
index 9180d646611..7461318f1cd 100644
--- a/include/asm-mips/mips-boards/maltaint.h
+++ b/include/asm-mips/mips-boards/maltaint.h
@@ -32,11 +32,6 @@
  */
 #define MALTA_INT_BASE		0
 
-/*
- * Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
- */
-#define MIPSCPU_INT_BASE	MIPS_CPU_IRQ_BASE
-
 /* CPU interrupt offsets */
 #define MIPSCPU_INT_SW0		0
 #define MIPSCPU_INT_SW1		1
@@ -49,7 +44,6 @@
 #define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
 #define MIPSCPU_INT_MB4		6
 #define MIPSCPU_INT_CORELO	MIPSCPU_INT_MB4
-#define MIPSCPU_INT_CPUCTR	7
 
 /*
  * Interrupts 64..127 are used for Soc-it Classic interrupts
diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h
index 4f6a3933699..e710bae0734 100644
--- a/include/asm-mips/mips-boards/seadint.h
+++ b/include/asm-mips/mips-boards/seadint.h
@@ -22,14 +22,7 @@
 
 #include <irq.h>
 
-/*
- * Interrupts 0..7 are used for SEAD CPU interrupts
- */
-#define MIPSCPU_INT_BASE	MIPS_CPU_IRQ_BASE
-
 #define MIPSCPU_INT_UART0	2
 #define MIPSCPU_INT_UART1	3
 
-#define MIPSCPU_INT_CPUCTR	7
-
 #endif /* !(_MIPS_SEADINT_H) */
diff --git a/include/asm-mips/mips-boards/simint.h b/include/asm-mips/mips-boards/simint.h
index 54f2fe621d6..8ef6db76d5c 100644
--- a/include/asm-mips/mips-boards/simint.h
+++ b/include/asm-mips/mips-boards/simint.h
@@ -21,15 +21,11 @@
 
 #define SIM_INT_BASE		0
 #define MIPSCPU_INT_MB0		2
-#define MIPSCPU_INT_BASE	MIPS_CPU_IRQ_BASE
 #define MIPS_CPU_TIMER_IRQ	7
 
 
-#define MIPSCPU_INT_CPUCTR	7
-
 #define MSC01E_INT_BASE		64
 
-#define MIPSCPU_INT_CPUCTR	7
 #define MSC01E_INT_CPUCTR	11
 
 #endif