Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform conversion patches from Olof Johansson:
 "Here are more patches in the progression towards multiplatform, sparse
  irq conversions in particular.

  Tegra has a handful of cleanups and general groundwork, but is not
  quite there yet on full enablement.

  Platforms that are enabled through this branch are VT8500 and Zynq.
  Note that i.MX was converted in one of the earlier cleanup branches as
  well (before we started a separate topic for multiplatform).  And both
  new platforms for this merge window, sunxi and bcm, were merged with
  multiplatform support enabled."

Fix up conflicts mostly as per Olof.

* tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: zynq: Remove all unused mach headers
  ARM: zynq: add support for ARCH_MULTIPLATFORM
  ARM: zynq: make use of debug_ll_io_init()
  ARM: zynq: remove TTC early mapping
  ARM: tegra: move debug-macro.S to include/debug
  ARM: tegra: don't include iomap.h from debug-macro.S
  ARM: tegra: decouple uncompress.h and debug-macro.S
  ARM: tegra: simplify DEBUG_LL UART selection options
  ARM: tegra: select SPARSE_IRQ
  ARM: tegra: enhance timer.c to get IO address from device tree
  ARM: tegra: enhance timer.c to get IRQ info from device tree
  ARM: timer: fix checkpatch warnings
  ARM: tegra: add TWD to device tree
  ARM: tegra: define DT bindings for and instantiate RTC
  ARM: tegra: define DT bindings for and instantiate timer
  clocksource/mtu-nomadik: use apb_pclk
  clk: ux500: Register mtu apb_pclocks
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ...

3 files changed, 233 insertions, 1 deletions

diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h
new file mode 100644
index 00000000000..80088973b73
--- /dev/null
+++ b/include/linux/platform_data/clocksource-nomadik-mtu.h
@@ -0,0 +1,9 @@
+#ifndef __PLAT_MTU_H
+#define __PLAT_MTU_H
+
+void nmdk_timer_init(void __iomem *base, int irq);
+void nmdk_clkevt_reset(void);
+void nmdk_clksrc_reset(void);
+
+#endif /* __PLAT_MTU_H */
+
diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h
index 5b2d0817e26..94df96d9a33 100644
--- a/include/linux/platform_data/crypto-ux500.h
+++ b/include/linux/platform_data/crypto-ux500.h
@@ -7,7 +7,7 @@
 #ifndef _CRYPTO_UX500_H
 #define _CRYPTO_UX500_H
 #include <linux/dmaengine.h>
-#include <plat/ste_dma40.h>
+#include <linux/platform_data/dma-ste-dma40.h>
 
 struct hash_platform_data {
 	void *mem_to_engine;
diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
new file mode 100644
index 00000000000..9ff93b06568
--- /dev/null
+++ b/include/linux/platform_data/dma-ste-dma40.h
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+
+#ifndef STE_DMA40_H
+#define STE_DMA40_H
+
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+/*
+ * Maxium size for a single dma descriptor
+ * Size is limited to 16 bits.
+ * Size is in the units of addr-widths (1,2,4,8 bytes)
+ * Larger transfers will be split up to multiple linked desc
+ */
+#define STEDMA40_MAX_SEG_SIZE 0xFFFF
+
+/* dev types for memcpy */
+#define STEDMA40_DEV_DST_MEMORY (-1)
+#define	STEDMA40_DEV_SRC_MEMORY (-1)
+
+enum stedma40_mode {
+	STEDMA40_MODE_LOGICAL = 0,
+	STEDMA40_MODE_PHYSICAL,
+	STEDMA40_MODE_OPERATION,
+};
+
+enum stedma40_mode_opt {
+	STEDMA40_PCHAN_BASIC_MODE = 0,
+	STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
+	STEDMA40_PCHAN_MODULO_MODE,
+	STEDMA40_PCHAN_DOUBLE_DST_MODE,
+	STEDMA40_LCHAN_SRC_PHY_DST_LOG,
+	STEDMA40_LCHAN_SRC_LOG_DST_PHY,
+};
+
+#define STEDMA40_ESIZE_8_BIT  0x0
+#define STEDMA40_ESIZE_16_BIT 0x1
+#define STEDMA40_ESIZE_32_BIT 0x2
+#define STEDMA40_ESIZE_64_BIT 0x3
+
+/* The value 4 indicates that PEN-reg shall be set to 0 */
+#define STEDMA40_PSIZE_PHY_1  0x4
+#define STEDMA40_PSIZE_PHY_2  0x0
+#define STEDMA40_PSIZE_PHY_4  0x1
+#define STEDMA40_PSIZE_PHY_8  0x2
+#define STEDMA40_PSIZE_PHY_16 0x3
+
+/*
+ * The number of elements differ in logical and
+ * physical mode
+ */
+#define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
+#define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
+#define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
+#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+
+/* Maximum number of possible physical channels */
+#define STEDMA40_MAX_PHYS 32
+
+enum stedma40_flow_ctrl {
+	STEDMA40_NO_FLOW_CTRL,
+	STEDMA40_FLOW_CTRL,
+};
+
+enum stedma40_periph_data_width {
+	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
+	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
+	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
+	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
+};
+
+enum stedma40_xfer_dir {
+	STEDMA40_MEM_TO_MEM = 1,
+	STEDMA40_MEM_TO_PERIPH,
+	STEDMA40_PERIPH_TO_MEM,
+	STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - dst/src channel configuration
+ *
+ * @big_endian: true if the src/dst should be read as big endian
+ * @data_width: Data width of the src/dst hardware
+ * @p_size: Burst size
+ * @flow_ctrl: Flow control on/off.
+ */
+struct stedma40_half_channel_info {
+	bool big_endian;
+	enum stedma40_periph_data_width data_width;
+	int psize;
+	enum stedma40_flow_ctrl flow_ctrl;
+};
+
+/**
+ * struct stedma40_chan_cfg - Structure to be filled by client drivers.
+ *
+ * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
+ * @high_priority: true if high-priority
+ * @realtime: true if realtime mode is to be enabled.  Only available on DMA40
+ * version 3+, i.e DB8500v2+
+ * @mode: channel mode: physical, logical, or operation
+ * @mode_opt: options for the chosen channel mode
+ * @src_dev_type: Src device type
+ * @dst_dev_type: Dst device type
+ * @src_info: Parameters for dst half channel
+ * @dst_info: Parameters for dst half channel
+ * @use_fixed_channel: if true, use physical channel specified by phy_channel
+ * @phy_channel: physical channel to use, only if use_fixed_channel is true
+ *
+ * This structure has to be filled by the client drivers.
+ * It is recommended to do all dma configurations for clients in the machine.
+ *
+ */
+struct stedma40_chan_cfg {
+	enum stedma40_xfer_dir			 dir;
+	bool					 high_priority;
+	bool					 realtime;
+	enum stedma40_mode			 mode;
+	enum stedma40_mode_opt			 mode_opt;
+	int					 src_dev_type;
+	int					 dst_dev_type;
+	struct stedma40_half_channel_info	 src_info;
+	struct stedma40_half_channel_info	 dst_info;
+
+	bool					 use_fixed_channel;
+	int					 phy_channel;
+};
+
+/**
+ * struct stedma40_platform_data - Configuration struct for the dma device.
+ *
+ * @dev_len: length of dev_tx and dev_rx
+ * @dev_tx: mapping between destination event line and io address
+ * @dev_rx: mapping between source event line and io address
+ * @memcpy: list of memcpy event lines
+ * @memcpy_len: length of memcpy
+ * @memcpy_conf_phy: default configuration of physical channel memcpy
+ * @memcpy_conf_log: default configuration of logical channel memcpy
+ * @disabled_channels: A vector, ending with -1, that marks physical channels
+ * that are for different reasons not available for the driver.
+ */
+struct stedma40_platform_data {
+	u32				 dev_len;
+	const dma_addr_t		*dev_tx;
+	const dma_addr_t		*dev_rx;
+	int				*memcpy;
+	u32				 memcpy_len;
+	struct stedma40_chan_cfg	*memcpy_conf_phy;
+	struct stedma40_chan_cfg	*memcpy_conf_log;
+	int				 disabled_channels[STEDMA40_MAX_PHYS];
+	bool				 use_esram_lcla;
+};
+
+#ifdef CONFIG_STE_DMA40
+
+/**
+ * stedma40_filter() - Provides stedma40_chan_cfg to the
+ * ste_dma40 dma driver via the dmaengine framework.
+ * does some checking of what's provided.
+ *
+ * Never directly called by client. It used by dmaengine.
+ * @chan: dmaengine handle.
+ * @data: Must be of type: struct stedma40_chan_cfg and is
+ * the configuration of the framework.
+ *
+ *
+ */
+
+bool stedma40_filter(struct dma_chan *chan, void *data);
+
+/**
+ * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
+ * (=device)
+ *
+ * @chan: dmaengine handle
+ * @addr: source or destination physicall address.
+ * @size: bytes to transfer
+ * @direction: direction of transfer
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_transfer_direction direction,
+					    unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_table(&sg, 1);
+	sg.dma_address = addr;
+	sg.length = size;
+
+	return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags);
+}
+
+#else
+static inline bool stedma40_filter(struct dma_chan *chan, void *data)
+{
+	return false;
+}
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_transfer_direction direction,
+					    unsigned long flags)
+{
+	return NULL;
+}
+#endif
+
+#endif