Merge branch 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM OMAP serial updates from Russell King:
 "This series is a major reworking of the OMAP serial driver code fixing
  various bugs in the hardware-assisted flow control, extending up into
  serial_core for a couple of issues.  These fixes have been done as a
  set of progressive changes and transformations in the hope that no new
  bugs will be introduced by this series.

  The problems are many-fold, from the driver not being informed about
  updated settings, to the driver not knowing what the intentions of the
  upper layers are.

  The first four patches tackle the serial_core layer, allowing it to
  provide the necessary information to drivers, and the remaining
  patches allow the OMAP serial driver to take advantage of this.

  This brings hardware assisted RTS/CTS and XON/OFF flow control into a
  useful state.

  These patches have been in linux-next for most of the last cycle;
  indeed they predate the previous merge window.  They've also been
  posted to the OMAP people."

* 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm: (21 commits)
  SERIAL: omap: fix hardware assisted flow control
  SERIAL: omap: simplify (2)
  SERIAL: omap: move xon/xoff setting earlier
  SERIAL: omap: always set TCR
  SERIAL: omap: simplify
  SERIAL: omap: don't read back LCR/MCR/EFR
  SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios
  SERIAL: omap: configure xon/xoff before setting modem control lines
  SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR
  SERIAL: omap: move driver private definitions and structures to driver
  SERIAL: omap: remove 'irq_pending' bitfield
  SERIAL: omap: fix MCR TCRTLR bit handling
  SERIAL: omap: fix set_mctrl() breakage
  SERIAL: omap: no need to re-read EFR
  SERIAL: omap: remove setting of EFR SCD bit
  SERIAL: omap: allow hardware assisted IXANY mode to be disabled
  SERIAL: omap: allow hardware assisted rts/cts modes to be disabled
  SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control
  SERIAL: core: add hardware assisted h/w flow control support
  SERIAL: core: add hardware assisted s/w flow control support
  ...

Conflicts:
	drivers/tty/serial/omap-serial.c

1 files changed, 6 insertions, 0 deletions

diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 3c430228d23..c6690a2a27f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -46,6 +46,8 @@ struct uart_ops {
 	unsigned int	(*get_mctrl)(struct uart_port *);
 	void		(*stop_tx)(struct uart_port *);
 	void		(*start_tx)(struct uart_port *);
+	void		(*throttle)(struct uart_port *);
+	void		(*unthrottle)(struct uart_port *);
 	void		(*send_xchar)(struct uart_port *, char ch);
 	void		(*stop_rx)(struct uart_port *);
 	void		(*enable_ms)(struct uart_port *);
@@ -163,6 +165,10 @@ struct uart_port {
 #define UPF_BUGGY_UART		((__force upf_t) (1 << 14))
 #define UPF_NO_TXEN_TEST	((__force upf_t) (1 << 15))
 #define UPF_MAGIC_MULTIPLIER	((__force upf_t) (1 << 16))
+/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */
+#define UPF_HARD_FLOW		((__force upf_t) (1 << 21))
+/* Port has hardware-assisted s/w flow control */
+#define UPF_SOFT_FLOW		((__force upf_t) (1 << 22))
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
 #define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
 #define UPF_EXAR_EFR		((__force upf_t) (1 << 25))