Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

12 files changed, 2 insertions, 717 deletions

diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
deleted file mode 100644
index 5106acaa1d0..00000000000
--- a/include/asm-arm/plat-s3c/iic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - I2C Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
-
-/* Notes:
- *	1) All frequencies are expressed in Hz
- *	2) A value of zero is `do not care`
-*/
-
-struct s3c2410_platform_i2c {
-	int		bus_num;	/* bus number to use */
-	unsigned int	flags;
-	unsigned int	slave_addr;	/* slave address for controller */
-	unsigned long	bus_freq;	/* standard bus frequency */
-	unsigned long	max_freq;	/* max frequency for the bus */
-	unsigned long	min_freq;	/* min frequency for the bus */
-	unsigned int	sda_delay;	/* pclks (s3c2440 only) */
-};
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h
deleted file mode 100644
index f4dcd14af05..00000000000
--- a/include/asm-arm/plat-s3c/nand.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/nand.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - NAND device controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* struct s3c2410_nand_set
- *
- * define an set of one or more nand chips registered with an unique mtd
- *
- * nr_chips	 = number of chips in this set
- * nr_partitions = number of partitions pointed to be partitoons (or zero)
- * name		 = name of set (optional)
- * nr_map	 = map for low-layer logical to physical chip numbers (option)
- * partitions	 = mtd partition list
-*/
-
-struct s3c2410_nand_set {
-	unsigned int		disable_ecc : 1;
-
-	int			nr_chips;
-	int			nr_partitions;
-	char			*name;
-	int			*nr_map;
-	struct mtd_partition	*partitions;
-	struct nand_ecclayout	*ecc_layout;
-};
-
-struct s3c2410_platform_nand {
-	/* timing information for controller, all times in nanoseconds */
-
-	int	tacls;	/* time for active CLE/ALE to nWE/nOE */
-	int	twrph0;	/* active time for nWE/nOE */
-	int	twrph1;	/* time for release CLE/ALE from nWE/nOE inactive */
-
-	unsigned int	ignore_unset_ecc : 1;
-
-	int			nr_sets;
-	struct s3c2410_nand_set *sets;
-
-	void			(*select_chip)(struct s3c2410_nand_set *,
-					       int chip);
-};
-
diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/include/asm-arm/plat-s3c/regs-ac97.h
deleted file mode 100644
index c3878f7acb8..00000000000
--- a/include/asm-arm/plat-s3c/regs-ac97.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-ac97.h
- *
- * Copyright (c) 2006 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2440 AC97 Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H __FILE__
-
-#define S3C_AC97_GLBCTRL				(0x00)
-
-#define S3C_AC97_GLBCTRL_CODECREADYIE			(1<<22)
-#define S3C_AC97_GLBCTRL_PCMOUTURIE			(1<<21)
-#define S3C_AC97_GLBCTRL_PCMINORIE			(1<<20)
-#define S3C_AC97_GLBCTRL_MICINORIE			(1<<19)
-#define S3C_AC97_GLBCTRL_PCMOUTTIE			(1<<18)
-#define S3C_AC97_GLBCTRL_PCMINTIE			(1<<17)
-#define S3C_AC97_GLBCTRL_MICINTIE			(1<<16)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_OFF			(0<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_PIO			(1<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_DMA			(2<<12)
-#define S3C_AC97_GLBCTRL_PCMOUTTM_MASK			(3<<12)
-#define S3C_AC97_GLBCTRL_PCMINTM_OFF			(0<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_PIO			(1<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_DMA			(2<<10)
-#define S3C_AC97_GLBCTRL_PCMINTM_MASK			(3<<10)
-#define S3C_AC97_GLBCTRL_MICINTM_OFF			(0<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_PIO			(1<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_DMA			(2<<8)
-#define S3C_AC97_GLBCTRL_MICINTM_MASK			(3<<8)
-#define S3C_AC97_GLBCTRL_TRANSFERDATAENABLE		(1<<3)
-#define S3C_AC97_GLBCTRL_ACLINKON			(1<<2)
-#define S3C_AC97_GLBCTRL_WARMRESET			(1<<1)
-#define S3C_AC97_GLBCTRL_COLDRESET			(1<<0)
-
-#define S3C_AC97_GLBSTAT				(0x04)
-
-#define S3C_AC97_GLBSTAT_CODECREADY			(1<<22)
-#define S3C_AC97_GLBSTAT_PCMOUTUR			(1<<21)
-#define S3C_AC97_GLBSTAT_PCMINORI			(1<<20)
-#define S3C_AC97_GLBSTAT_MICINORI			(1<<19)
-#define S3C_AC97_GLBSTAT_PCMOUTTI			(1<<18)
-#define S3C_AC97_GLBSTAT_PCMINTI			(1<<17)
-#define S3C_AC97_GLBSTAT_MICINTI			(1<<16)
-#define S3C_AC97_GLBSTAT_MAINSTATE_IDLE			(0<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_INIT			(1<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_READY		(2<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_ACTIVE		(3<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_LP			(4<<0)
-#define S3C_AC97_GLBSTAT_MAINSTATE_WARM			(5<<0)
-
-#define S3C_AC97_CODEC_CMD				(0x08)
-
-#define S3C_AC97_CODEC_CMD_READ				(1<<23)
-
-#define S3C_AC97_STAT					(0x0c)
-#define S3C_AC97_PCM_ADDR				(0x10)
-#define S3C_AC97_PCM_DATA				(0x18)
-#define S3C_AC97_MIC_DATA				(0x1C)
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
deleted file mode 100644
index 2f7c17de8ac..00000000000
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h
deleted file mode 100644
index b2caa4bca27..00000000000
--- a/include/asm-arm/plat-s3c/regs-nand.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
- *
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 NAND register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND
-
-
-#define S3C2410_NFREG(x) (x)
-
-#define S3C2410_NFCONF  S3C2410_NFREG(0x00)
-#define S3C2410_NFCMD   S3C2410_NFREG(0x04)
-#define S3C2410_NFADDR  S3C2410_NFREG(0x08)
-#define S3C2410_NFDATA  S3C2410_NFREG(0x0C)
-#define S3C2410_NFSTAT  S3C2410_NFREG(0x10)
-#define S3C2410_NFECC   S3C2410_NFREG(0x14)
-
-#define S3C2440_NFCONT   S3C2410_NFREG(0x04)
-#define S3C2440_NFCMD    S3C2410_NFREG(0x08)
-#define S3C2440_NFADDR   S3C2410_NFREG(0x0C)
-#define S3C2440_NFDATA   S3C2410_NFREG(0x10)
-#define S3C2440_NFECCD0  S3C2410_NFREG(0x14)
-#define S3C2440_NFECCD1  S3C2410_NFREG(0x18)
-#define S3C2440_NFECCD   S3C2410_NFREG(0x1C)
-#define S3C2440_NFSTAT   S3C2410_NFREG(0x20)
-#define S3C2440_NFESTAT0 S3C2410_NFREG(0x24)
-#define S3C2440_NFESTAT1 S3C2410_NFREG(0x28)
-#define S3C2440_NFMECC0  S3C2410_NFREG(0x2C)
-#define S3C2440_NFMECC1  S3C2410_NFREG(0x30)
-#define S3C2440_NFSECC   S3C2410_NFREG(0x34)
-#define S3C2440_NFSBLK   S3C2410_NFREG(0x38)
-#define S3C2440_NFEBLK   S3C2410_NFREG(0x3C)
-
-#define S3C2412_NFSBLK		S3C2410_NFREG(0x20)
-#define S3C2412_NFEBLK		S3C2410_NFREG(0x24)
-#define S3C2412_NFSTAT		S3C2410_NFREG(0x28)
-#define S3C2412_NFMECC_ERR0	S3C2410_NFREG(0x2C)
-#define S3C2412_NFMECC_ERR1	S3C2410_NFREG(0x30)
-#define S3C2412_NFMECC0		S3C2410_NFREG(0x34)
-#define S3C2412_NFMECC1		S3C2410_NFREG(0x38)
-#define S3C2412_NFSECC		S3C2410_NFREG(0x3C)
-
-#define S3C2410_NFCONF_EN          (1<<15)
-#define S3C2410_NFCONF_512BYTE     (1<<14)
-#define S3C2410_NFCONF_4STEP       (1<<13)
-#define S3C2410_NFCONF_INITECC     (1<<12)
-#define S3C2410_NFCONF_nFCE        (1<<11)
-#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
-#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
-#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
-
-#define S3C2410_NFSTAT_BUSY        (1<<0)
-
-#define S3C2440_NFCONF_BUSWIDTH_8	(0<<0)
-#define S3C2440_NFCONF_BUSWIDTH_16	(1<<0)
-#define S3C2440_NFCONF_ADVFLASH		(1<<3)
-#define S3C2440_NFCONF_TACLS(x)		((x)<<12)
-#define S3C2440_NFCONF_TWRPH0(x)	((x)<<8)
-#define S3C2440_NFCONF_TWRPH1(x)	((x)<<4)
-
-#define S3C2440_NFCONT_LOCKTIGHT	(1<<13)
-#define S3C2440_NFCONT_SOFTLOCK		(1<<12)
-#define S3C2440_NFCONT_ILLEGALACC_EN	(1<<10)
-#define S3C2440_NFCONT_RNBINT_EN	(1<<9)
-#define S3C2440_NFCONT_RN_FALLING	(1<<8)
-#define S3C2440_NFCONT_SPARE_ECCLOCK	(1<<6)
-#define S3C2440_NFCONT_MAIN_ECCLOCK	(1<<5)
-#define S3C2440_NFCONT_INITECC		(1<<4)
-#define S3C2440_NFCONT_nFCE		(1<<1)
-#define S3C2440_NFCONT_ENABLE		(1<<0)
-
-#define S3C2440_NFSTAT_READY		(1<<0)
-#define S3C2440_NFSTAT_nCE		(1<<1)
-#define S3C2440_NFSTAT_RnB_CHANGE	(1<<2)
-#define S3C2440_NFSTAT_ILLEGAL_ACCESS	(1<<3)
-
-#define S3C2412_NFCONF_NANDBOOT		(1<<31)
-#define S3C2412_NFCONF_ECCCLKCON	(1<<30)
-#define S3C2412_NFCONF_ECC_MLC		(1<<24)
-#define S3C2412_NFCONF_TACLS_MASK	(7<<12)	/* 1 extra bit of Tacls */
-
-#define S3C2412_NFCONT_ECC4_DIRWR	(1<<18)
-#define S3C2412_NFCONT_LOCKTIGHT	(1<<17)
-#define S3C2412_NFCONT_SOFTLOCK		(1<<16)
-#define S3C2412_NFCONT_ECC4_ENCINT	(1<<13)
-#define S3C2412_NFCONT_ECC4_DECINT	(1<<12)
-#define S3C2412_NFCONT_MAIN_ECC_LOCK	(1<<7)
-#define S3C2412_NFCONT_INIT_MAIN_ECC	(1<<5)
-#define S3C2412_NFCONT_nFCE1		(1<<2)
-#define S3C2412_NFCONT_nFCE0		(1<<1)
-
-#define S3C2412_NFSTAT_ECC_ENCDONE	(1<<7)
-#define S3C2412_NFSTAT_ECC_DECDONE	(1<<6)
-#define S3C2412_NFSTAT_ILLEGAL_ACCESS	(1<<5)
-#define S3C2412_NFSTAT_RnB_CHANGE	(1<<4)
-#define S3C2412_NFSTAT_nFCE1		(1<<3)
-#define S3C2412_NFSTAT_nFCE0		(1<<2)
-#define S3C2412_NFSTAT_Res1		(1<<1)
-#define S3C2412_NFSTAT_READY		(1<<0)
-
-#define S3C2412_NFECCERR_SERRDATA(x)	(((x) >> 21) & 0xf)
-#define S3C2412_NFECCERR_SERRBIT(x)	(((x) >> 18) & 0x7)
-#define S3C2412_NFECCERR_MERRDATA(x)	(((x) >> 7) & 0x3ff)
-#define S3C2412_NFECCERR_MERRBIT(x)	(((x) >> 4) & 0x7)
-#define S3C2412_NFECCERR_SPARE_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_MAIN_ERR(x)	(((x) >> 2) & 0x3)
-#define S3C2412_NFECCERR_NONE		(0)
-#define S3C2412_NFECCERR_1BIT		(1)
-#define S3C2412_NFECCERR_MULTIBIT	(2)
-#define S3C2412_NFECCERR_ECCAREA	(3)
-
-
-
-#endif /* __ASM_ARM_REGS_NAND */
-
diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/include/asm-arm/plat-s3c/regs-rtc.h
deleted file mode 100644
index d5837cf8e40..00000000000
--- a/include/asm-arm/plat-s3c/regs-rtc.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Internal RTC register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_RTC_H
-#define __ASM_ARCH_REGS_RTC_H __FILE__
-
-#define S3C2410_RTCREG(x) (x)
-
-#define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
-#define S3C2410_RTCCON_RTCEN  (1<<0)
-#define S3C2410_RTCCON_CLKSEL (1<<1)
-#define S3C2410_RTCCON_CNTSEL (1<<2)
-#define S3C2410_RTCCON_CLKRST (1<<3)
-
-#define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
-#define S3C2410_TICNT_ENABLE  (1<<7)
-
-#define S3C2410_RTCALM	      S3C2410_RTCREG(0x50)
-#define S3C2410_RTCALM_ALMEN  (1<<6)
-#define S3C2410_RTCALM_YEAREN (1<<5)
-#define S3C2410_RTCALM_MONEN  (1<<4)
-#define S3C2410_RTCALM_DAYEN  (1<<3)
-#define S3C2410_RTCALM_HOUREN (1<<2)
-#define S3C2410_RTCALM_MINEN  (1<<1)
-#define S3C2410_RTCALM_SECEN  (1<<0)
-
-#define S3C2410_RTCALM_ALL \
-  S3C2410_RTCALM_ALMEN | S3C2410_RTCALM_YEAREN | S3C2410_RTCALM_MONEN |\
-  S3C2410_RTCALM_DAYEN | S3C2410_RTCALM_HOUREN | S3C2410_RTCALM_MINEN |\
-  S3C2410_RTCALM_SECEN
-
-
-#define S3C2410_ALMSEC	      S3C2410_RTCREG(0x54)
-#define S3C2410_ALMMIN	      S3C2410_RTCREG(0x58)
-#define S3C2410_ALMHOUR	      S3C2410_RTCREG(0x5c)
-
-#define S3C2410_ALMDATE	      S3C2410_RTCREG(0x60)
-#define S3C2410_ALMMON	      S3C2410_RTCREG(0x64)
-#define S3C2410_ALMYEAR	      S3C2410_RTCREG(0x68)
-
-#define S3C2410_RTCRST	      S3C2410_RTCREG(0x6c)
-
-#define S3C2410_RTCSEC	      S3C2410_RTCREG(0x70)
-#define S3C2410_RTCMIN	      S3C2410_RTCREG(0x74)
-#define S3C2410_RTCHOUR	      S3C2410_RTCREG(0x78)
-#define S3C2410_RTCDATE	      S3C2410_RTCREG(0x7c)
-#define S3C2410_RTCDAY	      S3C2410_RTCREG(0x80)
-#define S3C2410_RTCMON	      S3C2410_RTCREG(0x84)
-#define S3C2410_RTCYEAR	      S3C2410_RTCREG(0x88)
-
-
-#endif /* __ASM_ARCH_REGS_RTC_H */
diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h
deleted file mode 100644
index 4938492470f..00000000000
--- a/include/asm-arm/plat-s3c/regs-watchdog.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Watchdog timer control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H
-
-#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
-
-#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
-
-/* the watchdog can either generate a reset pulse, or an
- * interrupt.
- */
-
-#define S3C2410_WTCON_RSTEN   (0x01)
-#define S3C2410_WTCON_INTEN   (1<<2)
-#define S3C2410_WTCON_ENABLE  (1<<5)
-
-#define S3C2410_WTCON_DIV16   (0<<3)
-#define S3C2410_WTCON_DIV32   (1<<3)
-#define S3C2410_WTCON_DIV64   (2<<3)
-#define S3C2410_WTCON_DIV128  (3<<3)
-
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
-
-#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
-
-
diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h
deleted file mode 100644
index 2d0852ac3b2..00000000000
--- a/include/asm-arm/plat-s3c24xx/mci.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _ARCH_MCI_H
-#define _ARCH_MCI_H
-
-struct s3c24xx_mci_pdata {
-	unsigned int	wprotect_invert : 1;
-	unsigned int	detect_invert : 1;   /* set => detect active high. */
-
-	unsigned int	gpio_detect;
-	unsigned int	gpio_wprotect;
-	unsigned long	ocr_avail;
-	void		(*set_power)(unsigned char power_mode,
-				     unsigned short vdd);
-};
-
-#endif /* _ARCH_NCI_H */
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
deleted file mode 100644
index 2b35479ee35..00000000000
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-spi.h
- *
- * Copyright (c) 2004 Fetron GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 SPI register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_SPI_H
-#define __ASM_ARCH_REGS_SPI_H
-
-#define S3C2410_SPI1	(0x20)
-#define S3C2412_SPI1	(0x100)
-
-#define S3C2410_SPCON	(0x00)
-
-#define S3C2412_SPCON_RXFIFO_RB2	(0<<14)
-#define S3C2412_SPCON_RXFIFO_RB4	(1<<14)
-#define S3C2412_SPCON_RXFIFO_RB12	(2<<14)
-#define S3C2412_SPCON_RXFIFO_RB14	(3<<14)
-#define S3C2412_SPCON_TXFIFO_RB2	(0<<12)
-#define S3C2412_SPCON_TXFIFO_RB4	(1<<12)
-#define S3C2412_SPCON_TXFIFO_RB12	(2<<12)
-#define S3C2412_SPCON_TXFIFO_RB14	(3<<12)
-#define S3C2412_SPCON_RXFIFO_RESET	(1<<11) /* RxFIFO reset */
-#define S3C2412_SPCON_TXFIFO_RESET	(1<<10) /* TxFIFO reset */
-#define S3C2412_SPCON_RXFIFO_EN		(1<<9)  /* RxFIFO Enable */
-#define S3C2412_SPCON_TXFIFO_EN		(1<<8)  /* TxFIFO Enable */
-
-#define S3C2412_SPCON_DIRC_RX	  (1<<7)
-
-#define S3C2410_SPCON_SMOD_DMA	  (2<<5)	/* DMA mode */
-#define S3C2410_SPCON_SMOD_INT	  (1<<5)	/* interrupt mode */
-#define S3C2410_SPCON_SMOD_POLL   (0<<5)	/* polling mode */
-#define S3C2410_SPCON_ENSCK	  (1<<4)	/* Enable SCK */
-#define S3C2410_SPCON_MSTR	  (1<<3)	/* Master/Slave select
-						   0: slave, 1: master */
-#define S3C2410_SPCON_CPOL_HIGH	  (1<<2)	/* Clock polarity select */
-#define S3C2410_SPCON_CPOL_LOW	  (0<<2)	/* Clock polarity select */
-
-#define S3C2410_SPCON_CPHA_FMTB	  (1<<1)	/* Clock Phase Select */
-#define S3C2410_SPCON_CPHA_FMTA	  (0<<1)	/* Clock Phase Select */
-
-#define S3C2410_SPCON_TAGD	  (1<<0)	/* Tx auto garbage data mode */
-
-
-#define S3C2410_SPSTA	 (0x04)
-
-#define S3C2412_SPSTA_RXFIFO_AE		(1<<11)
-#define S3C2412_SPSTA_TXFIFO_AE		(1<<10)
-#define S3C2412_SPSTA_RXFIFO_ERROR	(1<<9)
-#define S3C2412_SPSTA_TXFIFO_ERROR	(1<<8)
-#define S3C2412_SPSTA_RXFIFO_FIFO	(1<<7)
-#define S3C2412_SPSTA_RXFIFO_EMPTY	(1<<6)
-#define S3C2412_SPSTA_TXFIFO_NFULL	(1<<5)
-#define S3C2412_SPSTA_TXFIFO_EMPTY	(1<<4)
-
-#define S3C2410_SPSTA_DCOL	  (1<<2)	/* Data Collision Error */
-#define S3C2410_SPSTA_MULD	  (1<<1)	/* Multi Master Error */
-#define S3C2410_SPSTA_READY	  (1<<0)	/* Data Tx/Rx ready */
-#define S3C2412_SPSTA_READY_ORG	  (1<<3)
-
-#define S3C2410_SPPIN	 (0x08)
-
-#define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
-#define S3C2410_SPPIN_RESERVED	  (1<<1)
-#define S3C2400_SPPIN_nCS     	  (1<<1)	/* SPI Card Select */
-#define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
-
-#define S3C2410_SPPRE	 (0x0C)
-#define S3C2410_SPTDAT	 (0x10)
-#define S3C2410_SPRDAT	 (0x14)
-
-#define S3C2412_TXFIFO	 (0x18)
-#define S3C2412_RXFIFO	 (0x18)
-#define S3C2412_SPFIC	 (0x24)
-
-
-#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/include/asm-arm/plat-s3c24xx/regs-udc.h
deleted file mode 100644
index f0dd4a41b37..00000000000
--- a/include/asm-arm/plat-s3c24xx/regs-udc.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-udc.h
- *
- * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
- *
- * This include file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
-*/
-
-#ifndef __ASM_ARCH_REGS_UDC_H
-#define __ASM_ARCH_REGS_UDC_H
-
-#define S3C2410_USBDREG(x) (x)
-
-#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
-#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
-#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
-
-#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
-#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
-
-#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
-
-#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
-#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
-
-#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
-#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
-#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
-#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
-#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
-
-#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
-#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
-#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
-#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
-#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
-#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
-
-#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
-#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
-#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
-#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
-#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
-#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
-
-#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
-#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
-#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
-#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
-#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
-#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
-
-#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
-#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
-#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
-#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
-#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
-#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
-
-#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
-
-/* indexed registers */
-
-#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
-
-#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
-
-#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
-#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
-
-#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
-#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
-#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
-#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
-
-#define S3C2410_UDC_FUNCADDR_UPDATE	(1<<7)
-
-#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
-#define S3C2410_UDC_PWR_RESET		(1<<3) // R
-#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
-#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
-#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
-
-#define S3C2410_UDC_PWR_DEFAULT		0x00
-
-#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
-#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
-#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
-#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
-#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
-#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
-#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
-#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
-#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
-#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
-
-#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
-#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
-
-
-#define S3C2410_UDC_INDEX_EP0		(0x00)
-#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
-#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
-#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
-#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
-
-#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
-#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
-#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
-#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
-
-#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
-#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
-#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
-
-#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
-#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
-#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
-#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
-#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
-#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
-
-#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
-#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
-#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
-
-#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
-#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
-#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
-#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
-#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
-#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
-#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
-#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
-
-#define S3C2410_UDC_MAXP_8		(1<<0)
-#define S3C2410_UDC_MAXP_16		(1<<1)
-#define S3C2410_UDC_MAXP_32		(1<<2)
-#define S3C2410_UDC_MAXP_64		(1<<3)
-
-
-#endif
diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/include/asm-arm/plat-s3c24xx/udc.h
deleted file mode 100644
index 546bb4008f4..00000000000
--- a/include/asm-arm/plat-s3c24xx/udc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/udc.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	14-Mar-2005	RTP	Created file
- *	02-Aug-2005	RTP	File rename
- *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
- *	18-Jan-2007	HMW	Add per-platform vbus_draw function
-*/
-
-#ifndef __ASM_ARM_ARCH_UDC_H
-#define __ASM_ARM_ARCH_UDC_H
-
-enum s3c2410_udc_cmd_e {
-	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
-	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
-	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
-};
-
-struct s3c2410_udc_mach_info {
-	void	(*udc_command)(enum s3c2410_udc_cmd_e);
- 	void	(*vbus_draw)(unsigned int ma);
-	unsigned int vbus_pin;
-	unsigned char vbus_pin_inverted;
-};
-
-extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
-
-#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 4e4f1277f3b..feb3b939ec4 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -158,6 +158,8 @@
 /* SH-SCI */
 #define PORT_SCIFA	83
 
+#define PORT_S3C6400	84
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>