Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

50 files changed, 1755 insertions, 121 deletions

diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
index 45a6c6cc29d..2e23651e217 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -14,8 +14,8 @@
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000
-		orrne	\rx, \rx, #0x00b00000
                 movne   \rx, #0xff000000
+		orrne	\rx, \rx, #0x00b00000
                 add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
 						@ byte writes used - Big Endian.
                 .endm
diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h
index 1438c6cef0c..054fb9a8e0c 100644
--- a/include/asm-arm/arch-omap/usb.h
+++ b/include/asm-arm/arch-omap/usb.h
@@ -47,6 +47,15 @@
 #	define	 HMC_TLLATTACH		(1 << 6)
 #	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
 #define OTG_CTRL_REG			OTG_REG32(0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
 #	define	 OTG_ASESSVLD		(1 << 20)
 #	define	 OTG_BSESSEND		(1 << 19)
 #	define	 OTG_BSESSVLD		(1 << 18)
diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
index 2114acb3d23..4f68c8a5a19 100644
--- a/include/asm-arm/ide.h
+++ b/include/asm-arm/ide.h
@@ -5,7 +5,7 @@
  */
 
 /*
- *  This file contains the i386 architecture specific IDE code.
+ *  This file contains the ARM architecture specific IDE code.
  */
 
 #ifndef __ASMARM_IDE_H
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index cc4b5f5dbfc..cfa71a0dffb 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -82,7 +82,7 @@ extern void __readwrite_bug(const char *fn);
  * only.  Their primary purpose is to access PCI and ISA peripherals.
  *
  * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerious
+ * big endian mode connectivity is in place, as described by numerous
  * ARM documents:
  *
  *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
index 047980ad18d..2cf279a4401 100644
--- a/include/asm-arm/mach/time.h
+++ b/include/asm-arm/mach/time.h
@@ -60,6 +60,8 @@ struct dyn_tick_timer {
 };
 
 void timer_dyn_reprogram(void);
+#else
+#define timer_dyn_reprogram()	do { } while (0)
 #endif
 
 extern struct sys_timer *system_timer;
diff --git a/include/asm-i386/ide.h b/include/asm-i386/ide.h
index 859ebf4da63..79dfab87135 100644
--- a/include/asm-i386/ide.h
+++ b/include/asm-i386/ide.h
@@ -41,13 +41,17 @@ static __inline__ int ide_default_irq(unsigned long base)
 
 static __inline__ unsigned long ide_default_io_base(int index)
 {
+	if (pci_find_device(PCI_ANY_ID, PCI_ANY_ID, NULL) == NULL) {
+		switch(index) {
+			case 2: return 0x1e8;
+			case 3: return 0x168;
+			case 4: return 0x1e0;
+			case 5: return 0x160;
+		}
+	}
 	switch (index) {
 		case 0:	return 0x1f0;
 		case 1:	return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		case 4: return 0x1e0;
-		case 5: return 0x160;
 		default:
 			return 0;
 	}
diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h
index f22fab0cea2..ab216e1370e 100644
--- a/include/asm-i386/tlbflush.h
+++ b/include/asm-i386/tlbflush.h
@@ -22,16 +22,18 @@
  */
 #define __flush_tlb_global()						\
 	do {								\
-		unsigned int tmpreg;					\
+		unsigned int tmpreg, cr4, cr4_orig;			\
 									\
 		__asm__ __volatile__(					\
-			"movl %1, %%cr4;  # turn off PGE     \n"	\
+			"movl %%cr4, %2;  # turn off PGE     \n"	\
+			"movl %2, %1;                        \n"	\
+			"andl %3, %1;                        \n"	\
+			"movl %1, %%cr4;                     \n"	\
 			"movl %%cr3, %0;                     \n"	\
 			"movl %0, %%cr3;  # flush TLB        \n"	\
 			"movl %2, %%cr4;  # turn PGE back on \n"	\
-			: "=&r" (tmpreg)				\
-			: "r" (mmu_cr4_features & ~X86_CR4_PGE),	\
-			  "r" (mmu_cr4_features)			\
+			: "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig)	\
+			: "i" (~X86_CR4_PGE)				\
 			: "memory");					\
 	} while (0)
 
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index 176413fb9ae..e25e4c71a87 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -294,8 +294,10 @@
 #define __NR_add_key		286
 #define __NR_request_key	287
 #define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
 
-#define NR_syscalls 289
+#define NR_syscalls 291
 
 /*
  * user-visible error numbers are in the range -1 - -128: see
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
index 7b700035e36..bf36a32e37e 100644
--- a/include/asm-ia64/kprobes.h
+++ b/include/asm-ia64/kprobes.h
@@ -28,6 +28,7 @@
 #include <linux/ptrace.h>
 #include <asm/break.h>
 
+#define MAX_INSN_SIZE   16
 #define BREAK_INST	(long)(__IA64_BREAK_KPROBE << 6)
 
 typedef union cmp_inst {
@@ -63,6 +64,8 @@ typedef struct _bundle {
 
 #define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)pentry
 
+#define ARCH_SUPPORTS_KRETPROBES
+
 #define SLOT0_OPCODE_SHIFT	(37)
 #define SLOT1_p1_OPCODE_SHIFT	(37 - (64-46))
 #define SLOT2_OPCODE_SHIFT 	(37)
@@ -94,11 +97,6 @@ struct arch_specific_insn {
 };
 
 /* ia64 does not need this */
-static inline void jprobe_return(void)
-{
-}
-
-/* ia64 does not need this */
 static inline void arch_copy_kprobe(struct kprobe *p)
 {
 }
@@ -106,6 +104,12 @@ static inline void arch_copy_kprobe(struct kprobe *p)
 #ifdef CONFIG_KPROBES
 extern int kprobe_exceptions_notify(struct notifier_block *self,
 				    unsigned long val, void *data);
+
+/* ia64 does not need this */
+static inline void jprobe_return(void)
+{
+}
+
 #else				/* !CONFIG_KPROBES */
 static inline int kprobe_exceptions_notify(struct notifier_block *self,
 					   unsigned long val, void *data)
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
index 8e3dbde1b42..e9eb7f62d32 100644
--- a/include/asm-ia64/sections.h
+++ b/include/asm-ia64/sections.h
@@ -17,6 +17,7 @@ extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
 extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
 extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
 extern char __start_unwind[], __end_unwind[];
+extern char __start_ivt_text[], __end_ivt_text[];
 
 #endif /* _ASM_IA64_SECTIONS_H */
 
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index f7f43ec2483..517f1649ee6 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -263,6 +263,8 @@
 #define __NR_add_key			1271
 #define __NR_request_key		1272
 #define __NR_keyctl			1273
+#define __NR_ioprio_set			1274
+#define __NR_ioprio_get			1275
 #define __NR_set_zone_reclaim		1276
 
 #ifdef __KERNEL__
diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h
index dbe85331974..7848aa610c0 100644
--- a/include/asm-ppc/open_pic.h
+++ b/include/asm-ppc/open_pic.h
@@ -25,6 +25,11 @@
 #define OPENPIC_VEC_IPI		118	/* and up */
 #define OPENPIC_VEC_SPURIOUS	255
 
+/* Priorities */
+#define OPENPIC_PRIORITY_IPI_BASE	10
+#define OPENPIC_PRIORITY_DEFAULT	4
+#define OPENPIC_PRIORITY_NMI		9
+
 /* OpenPIC IRQ controller structure */
 extern struct hw_interrupt_type open_pic;
 
@@ -42,6 +47,7 @@ extern int epic_serial_mode;
 extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr);
 extern void openpic_init(int linux_irq_offset);
 extern void openpic_init_nmi_irq(u_int irq);
+extern void openpic_set_irq_priority(u_int irq, u_int pri);
 extern void openpic_hookup_cascade(u_int irq, char *name,
 				   int (*cascade_fn)(struct pt_regs *));
 extern u_int openpic_irq(void);
diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h
index cc51e5c9acc..e8b79220b29 100644
--- a/include/asm-ppc/unistd.h
+++ b/include/asm-ppc/unistd.h
@@ -277,8 +277,10 @@
 #define __NR_request_key	270
 #define __NR_keyctl		271
 #define __NR_waitid		272
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
 
-#define __NR_syscalls		273
+#define __NR_syscalls		275
 
 #define __NR(n)	#n
 
diff --git a/include/asm-ppc64/kprobes.h b/include/asm-ppc64/kprobes.h
index 19b468bed05..0802919c323 100644
--- a/include/asm-ppc64/kprobes.h
+++ b/include/asm-ppc64/kprobes.h
@@ -42,10 +42,13 @@ typedef unsigned int kprobe_opcode_t;
 
 #define JPROBE_ENTRY(pentry)	(kprobe_opcode_t *)((func_descr_t *)pentry)
 
+#define ARCH_SUPPORTS_KRETPROBES
+void kretprobe_trampoline(void);
+
 /* Architecture specific copy of original instruction */
 struct arch_specific_insn {
 	/* copy of original instruction */
-	kprobe_opcode_t insn[MAX_INSN_SIZE];
+	kprobe_opcode_t *insn;
 };
 
 #ifdef CONFIG_KPROBES
diff --git a/include/asm-sparc64/auxio.h b/include/asm-sparc64/auxio.h
index 5eb01dd4715..81a590a50a1 100644
--- a/include/asm-sparc64/auxio.h
+++ b/include/asm-sparc64/auxio.h
@@ -75,6 +75,8 @@
 
 #ifndef __ASSEMBLY__
 
+extern void __iomem *auxio_register;
+
 #define AUXIO_LTE_ON	1
 #define AUXIO_LTE_OFF	0
 
diff --git a/include/asm-sparc64/floppy.h b/include/asm-sparc64/floppy.h
index e071b4b4edf..49d49a28594 100644
--- a/include/asm-sparc64/floppy.h
+++ b/include/asm-sparc64/floppy.h
@@ -159,7 +159,7 @@ static void sun_82077_fd_outb(unsigned char value, unsigned long port)
  * underruns.  If non-zero, doing_pdma encodes the direction of
  * the transfer for debugging.  1=read 2=write
  */
-char *pdma_vaddr;
+unsigned char *pdma_vaddr;
 unsigned long pdma_size;
 volatile int doing_pdma = 0;
 
@@ -209,8 +209,7 @@ static void sun_fd_enable_dma(void)
 	pdma_areasize = pdma_size;
 }
 
-/* Our low-level entry point in arch/sparc/kernel/entry.S */
-extern irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs);
+extern irqreturn_t sparc_floppy_irq(int, void *, struct pt_regs *);
 
 static int sun_fd_request_irq(void)
 {
@@ -220,8 +219,8 @@ static int sun_fd_request_irq(void)
 	if(!once) {
 		once = 1;
 
-		error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, 
-					 SA_INTERRUPT, "floppy", NULL);
+		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq, 
+				    SA_INTERRUPT, "floppy", NULL);
 
 		return ((error == 0) ? 0 : -1);
 	}
@@ -615,7 +614,7 @@ static unsigned long __init sun_floppy_init(void)
 		struct linux_ebus *ebus;
 		struct linux_ebus_device *edev = NULL;
 		unsigned long config = 0;
-		unsigned long auxio_reg;
+		void __iomem *auxio_reg;
 
 		for_each_ebus(ebus) {
 			for_each_ebusdev(edev, ebus) {
@@ -642,7 +641,7 @@ static unsigned long __init sun_floppy_init(void)
 		/* Make sure the high density bit is set, some systems
 		 * (most notably Ultra5/Ultra10) come up with it clear.
 		 */
-		auxio_reg = edev->resource[2].start;
+		auxio_reg = (void __iomem *) edev->resource[2].start;
 		writel(readl(auxio_reg)|0x2, auxio_reg);
 
 		sun_pci_ebus_dev = ebus->self;
@@ -650,7 +649,8 @@ static unsigned long __init sun_floppy_init(void)
 		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
 
 		/* XXX ioremap */
-		sun_pci_fd_ebus_dma.regs = edev->resource[1].start;
+		sun_pci_fd_ebus_dma.regs = (void __iomem *)
+			edev->resource[1].start;
 		if (!sun_pci_fd_ebus_dma.regs)
 			return 0;
 
diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h
index 3aef0ca6775..018e2e46082 100644
--- a/include/asm-sparc64/irq.h
+++ b/include/asm-sparc64/irq.h
@@ -19,7 +19,7 @@
 /* You should not mess with this directly. That's the job of irq.c.
  *
  * If you make changes here, please update hand coded assembler of
- * SBUS/floppy interrupt handler in entry.S -DaveM
+ * the vectored interrupt trap handler in entry.S -DaveM
  *
  * This is currently one DCACHE line, two buckets per L2 cache
  * line.  Keep this in mind please.
@@ -122,11 +122,6 @@ extern void enable_irq(unsigned int);
 extern unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long imap);
 extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
 
-extern int request_fast_irq(unsigned int irq,
-			    irqreturn_t (*handler)(int, void *, struct pt_regs *),
-			    unsigned long flags, __const__ char *devname,
-			    void *dev_id);
-
 static __inline__ void set_softint(unsigned long bits)
 {
 	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
index bf2ae90ed3d..a1cc94f9598 100644
--- a/include/asm-sparc64/rwsem.h
+++ b/include/asm-sparc64/rwsem.h
@@ -55,8 +55,9 @@ static __inline__ int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
 		"add		%%g1, %1, %%g7\n\t"
 		"cas		[%2], %%g1, %%g7\n\t"
 		"cmp		%%g1, %%g7\n\t"
+		"membar		#StoreLoad | #StoreStore\n\t"
 		"bne,pn		%%icc, 1b\n\t"
-		" membar	#StoreLoad | #StoreStore\n\t"
+		" nop\n\t"
 		"mov		%%g7, %0\n\t"
 		: "=&r" (tmp)
 		: "0" (tmp), "r" (sem)
diff --git a/include/asm-sparc64/spinlock.h b/include/asm-sparc64/spinlock.h
index db7581bdb53..9cb93a5c2b4 100644
--- a/include/asm-sparc64/spinlock.h
+++ b/include/asm-sparc64/spinlock.h
@@ -52,12 +52,14 @@ static inline void _raw_spin_lock(spinlock_t *lock)
 
 	__asm__ __volatile__(
 "1:	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
 "	brnz,pn		%0, 2f\n"
-"	 membar		#StoreLoad | #StoreStore\n"
+"	 nop\n"
 "	.subsection	2\n"
 "2:	ldub		[%1], %0\n"
+"	membar		#LoadLoad\n"
 "	brnz,pt		%0, 2b\n"
-"	 membar		#LoadLoad\n"
+"	 nop\n"
 "	ba,a,pt		%%xcc, 1b\n"
 "	.previous"
 	: "=&r" (tmp)
@@ -95,16 +97,18 @@ static inline void _raw_spin_lock_flags(spinlock_t *lock, unsigned long flags)
 
 	__asm__ __volatile__(
 "1:	ldstub		[%2], %0\n"
-"	brnz,pn		%0, 2f\n"
 "	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
 "	.subsection	2\n"
 "2:	rdpr		%%pil, %1\n"
 "	wrpr		%3, %%pil\n"
 "3:	ldub		[%2], %0\n"
-"	brnz,pt		%0, 3b\n"
 "	membar		#LoadLoad\n"
+"	brnz,pt		%0, 3b\n"
+"	 nop\n"
 "	ba,pt		%%xcc, 1b\n"
-"	wrpr		%1, %%pil\n"
+"	 wrpr		%1, %%pil\n"
 "	.previous"
 	: "=&r" (tmp1), "=&r" (tmp2)
 	: "r"(lock), "r"(flags)
@@ -162,12 +166,14 @@ static void inline __read_lock(rwlock_t *lock)
 "4:	 add		%0, 1, %1\n"
 "	cas		[%2], %0, %1\n"
 "	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
 "	bne,pn		%%icc, 1b\n"
-"	 membar		#StoreLoad | #StoreStore\n"
+"	 nop\n"
 "	.subsection	2\n"
 "2:	ldsw		[%2], %0\n"
+"	membar		#LoadLoad\n"
 "	brlz,pt		%0, 2b\n"
-"	 membar		#LoadLoad\n"
+"	 nop\n"
 "	ba,a,pt		%%xcc, 4b\n"
 "	.previous"
 	: "=&r" (tmp1), "=&r" (tmp2)
@@ -204,12 +210,14 @@ static void inline __write_lock(rwlock_t *lock)
 "4:	 or		%0, %3, %1\n"
 "	cas		[%2], %0, %1\n"
 "	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
 "	bne,pn		%%icc, 1b\n"
-"	 membar		#StoreLoad | #StoreStore\n"
+"	 nop\n"
 "	.subsection	2\n"
 "2:	lduw		[%2], %0\n"
+"	membar		#LoadLoad\n"
 "	brnz,pt		%0, 2b\n"
-"	 membar		#LoadLoad\n"
+"	 nop\n"
 "	ba,a,pt		%%xcc, 4b\n"
 "	.previous"
 	: "=&r" (tmp1), "=&r" (tmp2)
@@ -240,8 +248,9 @@ static int inline __write_trylock(rwlock_t *lock)
 "	 or		%0, %4, %1\n"
 "	cas		[%3], %0, %1\n"
 "	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
 "	bne,pn		%%icc, 1b\n"
-"	 membar		#StoreLoad | #StoreStore\n"
+"	 nop\n"
 "	mov		1, %2\n"
 "2:"
 	: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h
index 9d7613eea81..1aa932773af 100644
--- a/include/asm-sparc64/spitfire.h
+++ b/include/asm-sparc64/spitfire.h
@@ -111,7 +111,6 @@ static __inline__ void spitfire_put_dcache_tag(unsigned long addr, unsigned long
 			     "membar	#Sync"
 			     : /* No outputs */
 			     : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
-	__asm__ __volatile__ ("membar #Sync" : : : "memory");
 }
 
 /* The instruction cache lines are flushed with this, but note that
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h
index 2e811ac262a..06174238252 100644
--- a/include/asm-x86_64/tlbflush.h
+++ b/include/asm-x86_64/tlbflush.h
@@ -22,16 +22,18 @@
  */
 #define __flush_tlb_global()						\
 	do {								\
-		unsigned long tmpreg;					\
+		unsigned long tmpreg, cr4, cr4_orig;			\
 									\
 		__asm__ __volatile__(					\
-			"movq %1, %%cr4;  # turn off PGE     \n"	\
+			"movq %%cr4, %2;  # turn off PGE     \n"	\
+			"movq %2, %1;                        \n"	\
+			"andq %3, %1;                        \n"	\
+			"movq %1, %%cr4;                     \n"	\
 			"movq %%cr3, %0;  # flush TLB        \n"	\
 			"movq %0, %%cr3;                     \n"	\
 			"movq %2, %%cr4;  # turn PGE back on \n"	\
-			: "=&r" (tmpreg)				\
-			: "r" (mmu_cr4_features & ~X86_CR4_PGE),	\
-			  "r" (mmu_cr4_features)			\
+			: "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig)	\
+			: "i" (~X86_CR4_PGE)				\
 			: "memory");					\
 	} while (0)
 
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index d767adcbf0f..6560439a83e 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -561,8 +561,12 @@ __SYSCALL(__NR_add_key, sys_add_key)
 __SYSCALL(__NR_request_key, sys_request_key)
 #define __NR_keyctl		250
 __SYSCALL(__NR_keyctl, sys_keyctl)
+#define __NR_ioprio_set		251
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get		252
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
 
-#define __NR_syscall_max __NR_keyctl
+#define __NR_syscall_max __NR_ioprio_get
 #ifndef __NO_STUBS
 
 /* user-visible error numbers are in the range -1 - -4095 */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 038022763f0..36ef29fa0d8 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -22,6 +22,7 @@
 
 #include <linux/highmem.h>
 #include <linux/mempool.h>
+#include <linux/ioprio.h>
 
 /* Platforms may set this to teach the BIO layer about IOMMU hardware. */
 #include <asm/io.h>
@@ -150,6 +151,19 @@ struct bio {
 #define BIO_RW_SYNC	4
 
 /*
+ * upper 16 bits of bi_rw define the io priority of this bio
+ */
+#define BIO_PRIO_SHIFT	(8 * sizeof(unsigned long) - IOPRIO_BITS)
+#define bio_prio(bio)	((bio)->bi_rw >> BIO_PRIO_SHIFT)
+#define bio_prio_valid(bio)	ioprio_valid(bio_prio(bio))
+
+#define bio_set_prio(bio, prio)		do {			\
+	WARN_ON(prio >= (1 << IOPRIO_BITS));			\
+	(bio)->bi_rw &= ((1UL << BIO_PRIO_SHIFT) - 1);		\
+	(bio)->bi_rw |= ((unsigned long) (prio) << BIO_PRIO_SHIFT);	\
+} while (0)
+
+/*
  * various member access, note that bio_data should of course not be used
  * on highmem page vectors
  */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index b54a0348a89..21a8674cd14 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -54,16 +54,23 @@ struct as_io_context {
 
 struct cfq_queue;
 struct cfq_io_context {
-	void (*dtor)(struct cfq_io_context *);
-	void (*exit)(struct cfq_io_context *);
-
-	struct io_context *ioc;
-
 	/*
 	 * circular list of cfq_io_contexts belonging to a process io context
 	 */
 	struct list_head list;
 	struct cfq_queue *cfqq;
+	void *key;
+
+	struct io_context *ioc;
+
+	unsigned long last_end_request;
+	unsigned long last_queue;
+	unsigned long ttime_total;
+	unsigned long ttime_samples;
+	unsigned long ttime_mean;
+
+	void (*dtor)(struct cfq_io_context *);
+	void (*exit)(struct cfq_io_context *);
 };
 
 /*
@@ -73,7 +80,9 @@ struct cfq_io_context {
  */
 struct io_context {
 	atomic_t refcount;
-	pid_t pid;
+	struct task_struct *task;
+
+	int (*set_ioprio)(struct io_context *, unsigned int);
 
 	/*
 	 * For request batching
@@ -81,8 +90,6 @@ struct io_context {
 	unsigned long last_waited; /* Time last woken after wait for request */
 	int nr_batch_requests;     /* Number of requests left in the batch */
 
-	spinlock_t lock;
-
 	struct as_io_context *aic;
 	struct cfq_io_context *cic;
 };
@@ -134,6 +141,8 @@ struct request {
 
 	void *elevator_private;
 
+	unsigned short ioprio;
+
 	int rq_status;	/* should split this into a few status bits */
 	struct gendisk *rq_disk;
 	int errors;
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index ee0c6e8995d..424d5e622b4 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -10,6 +10,7 @@
 typedef struct _cciss_pci_info_struct
 {
 	unsigned char 	bus;
+	unsigned short	domain;
 	unsigned char 	dev_fn;
 	__u32 		board_id;
 } cciss_pci_info_struct; 
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index ee54f81faad..ea6bbc2d740 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -16,9 +16,9 @@ typedef void (elevator_remove_req_fn) (request_queue_t *, struct request *);
 typedef void (elevator_requeue_req_fn) (request_queue_t *, struct request *);
 typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct request *);
 typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *);
-typedef int (elevator_may_queue_fn) (request_queue_t *, int);
+typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *);
 
-typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, int);
+typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int);
 typedef void (elevator_put_req_fn) (request_queue_t *, struct request *);
 typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *);
 
@@ -96,9 +96,9 @@ extern struct request *elv_former_request(request_queue_t *, struct request *);
 extern struct request *elv_latter_request(request_queue_t *, struct request *);
 extern int elv_register_queue(request_queue_t *q);
 extern void elv_unregister_queue(request_queue_t *q);
-extern int elv_may_queue(request_queue_t *, int);
+extern int elv_may_queue(request_queue_t *, int, struct bio *);
 extern void elv_completed_request(request_queue_t *, struct request *);
-extern int elv_set_request(request_queue_t *, struct request *, int);
+extern int elv_set_request(request_queue_t *, struct request *, struct bio *, int);
 extern void elv_put_request(request_queue_t *, struct request *);
 
 /*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3ae8e37bdfc..047bde30836 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,7 @@ extern int dir_notify_enable;
 #include <linux/radix-tree.h>
 #include <linux/prio_tree.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 
 #include <asm/atomic.h>
 #include <asm/semaphore.h>
@@ -822,16 +823,34 @@ enum {
 #define vfs_check_frozen(sb, level) \
 	wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level)))
 
+static inline void get_fs_excl(void)
+{
+	atomic_inc(&current->fs_excl);
+}
+
+static inline void put_fs_excl(void)
+{
+	atomic_dec(&current->fs_excl);
+}
+
+static inline int has_fs_excl(void)
+{
+	return atomic_read(&current->fs_excl);
+}
+
+
 /*
  * Superblock locking.
  */
 static inline void lock_super(struct super_block * sb)
 {
+	get_fs_excl();
 	down(&sb->s_lock);
 }
 
 static inline void unlock_super(struct super_block * sb)
 {
+	put_fs_excl();
 	up(&sb->s_lock);
 }
 
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 03206a425d7..c727c195a91 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -81,6 +81,7 @@ extern struct group_info init_groups;
 	.mm		= NULL,						\
 	.active_mm	= &init_mm,					\
 	.run_list	= LIST_HEAD_INIT(tsk.run_list),			\
+	.ioprio		= 0,						\
 	.time_slice	= HZ,						\
 	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
 	.ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children),		\
@@ -110,6 +111,7 @@ extern struct group_info init_groups;
 	.proc_lock	= SPIN_LOCK_UNLOCKED,				\
 	.journal_info	= NULL,						\
 	.cpu_timers	= INIT_CPU_TIMERS(tsk.cpu_timers),		\
+	.fs_excl	= ATOMIC_INIT(0),				\
 }
 
 
diff --git a/include/linux/input.h b/include/linux/input.h
index 9d9598ed760..b9cc0ac71f4 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -859,6 +859,10 @@ struct input_dev {
 	int (*erase_effect)(struct input_dev *dev, int effect_id);
 
 	struct input_handle *grab;
+
+	struct semaphore sem;	/* serializes open and close operations */
+	unsigned int users;
+
 	struct device *dev;
 
 	struct list_head	h_list;
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
new file mode 100644
index 00000000000..8a453a0b5e4
--- /dev/null
+++ b/include/linux/ioprio.h
@@ -0,0 +1,88 @@
+#ifndef IOPRIO_H
+#define IOPRIO_H
+
+#include <linux/sched.h>
+
+/*
+ * Gives us 8 prio classes with 13-bits of data for each class
+ */
+#define IOPRIO_BITS		(16)
+#define IOPRIO_CLASS_SHIFT	(13)
+#define IOPRIO_PRIO_MASK	((1UL << IOPRIO_CLASS_SHIFT) - 1)
+
+#define IOPRIO_PRIO_CLASS(mask)	((mask) >> IOPRIO_CLASS_SHIFT)
+#define IOPRIO_PRIO_DATA(mask)	((mask) & IOPRIO_PRIO_MASK)
+#define IOPRIO_PRIO_VALUE(class, data)	(((class) << IOPRIO_CLASS_SHIFT) | data)
+
+#define ioprio_valid(mask)	(IOPRIO_PRIO_CLASS((mask)) != IOPRIO_CLASS_NONE)
+
+/*
+ * These are the io priority groups as implemented by CFQ. RT is the realtime
+ * class, it always gets premium service. BE is the best-effort scheduling
+ * class, the default for any process. IDLE is the idle scheduling class, it
+ * is only served when no one else is using the disk.
+ */
+enum {
+	IOPRIO_CLASS_NONE,
+	IOPRIO_CLASS_RT,
+	IOPRIO_CLASS_BE,
+	IOPRIO_CLASS_IDLE,
+};
+
+/*
+ * 8 best effort priority levels are supported
+ */
+#define IOPRIO_BE_NR	(8)
+
+asmlinkage int sys_ioprio_set(int, int, int);
+asmlinkage int sys_ioprio_get(int, int);
+
+enum {
+	IOPRIO_WHO_PROCESS = 1,
+	IOPRIO_WHO_PGRP,
+	IOPRIO_WHO_USER,
+};
+
+/*
+ * if process has set io priority explicitly, use that. if not, convert
+ * the cpu scheduler nice value to an io priority
+ */
+#define IOPRIO_NORM	(4)
+static inline int task_ioprio(struct task_struct *task)
+{
+	WARN_ON(!ioprio_valid(task->ioprio));
+	return IOPRIO_PRIO_DATA(task->ioprio);
+}
+
+static inline int task_nice_ioprio(struct task_struct *task)
+{
+	return (task_nice(task) + 20) / 5;
+}
+
+/*
+ * For inheritance, return the highest of the two given priorities
+ */
+static inline int ioprio_best(unsigned short aprio, unsigned short bprio)
+{
+	unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
+	unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
+
+	if (!ioprio_valid(aprio))
+		return bprio;
+	if (!ioprio_valid(bprio))
+		return aprio;
+
+	if (aclass == IOPRIO_CLASS_NONE)
+		aclass = IOPRIO_CLASS_BE;
+	if (bclass == IOPRIO_CLASS_NONE)
+		bclass = IOPRIO_CLASS_BE;
+
+	if (aclass == bclass)
+		return min(aprio, bprio);
+	if (aclass > bclass)
+		return bprio;
+	else
+		return aprio;
+}
+
+#endif
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index b7e0ab622cd..06b9af77eb7 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -111,18 +111,35 @@ struct js_corr {
 #define JS_SET_ALL		8
 
 struct JS_DATA_TYPE {
-	int buttons;
-	int x;
-	int y;
+	__s32 buttons;
+	__s32 x;
+	__s32 y;
 };
 
-struct JS_DATA_SAVE_TYPE {
-	int JS_TIMEOUT;
-	int BUSY;
-	long JS_EXPIRETIME;
-	long JS_TIMELIMIT;
+struct JS_DATA_SAVE_TYPE_32 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s32 JS_EXPIRETIME;
+	__s32 JS_TIMELIMIT;
 	struct JS_DATA_TYPE JS_SAVE;
 	struct JS_DATA_TYPE JS_CORR;
 };
 
+struct JS_DATA_SAVE_TYPE_64 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s64 JS_EXPIRETIME;
+	__s64 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+#if BITS_PER_LONG == 64
+#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
+#elif BITS_PER_LONG == 32
+#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_32
+#else
+#error Unexpected BITS_PER_LONG
+#endif
+
 #endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 5e1a7b0d7b3..b7a194c4362 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -104,33 +104,12 @@ struct jprobe {
 };
 
 #ifdef ARCH_SUPPORTS_KRETPROBES
-extern int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs);
-extern void trampoline_post_handler(struct kprobe *p, struct pt_regs *regs,
-							unsigned long flags);
-extern struct task_struct *arch_get_kprobe_task(void *ptr);
 extern void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs);
-extern void arch_kprobe_flush_task(struct task_struct *tk);
 #else /* ARCH_SUPPORTS_KRETPROBES */
-static inline void kretprobe_trampoline(void)
-{
-}
-static inline int trampoline_probe_handler(struct kprobe *p,
-						struct pt_regs *regs)
-{
-	return 0;
-}
-static inline void trampoline_post_handler(struct kprobe *p,
-				struct pt_regs *regs, unsigned long flags)
-{
-}
 static inline void arch_prepare_kretprobe(struct kretprobe *rp,
 					struct pt_regs *regs)
 {
 }
-static inline void arch_kprobe_flush_task(struct task_struct *tk)
-{
-}
-#define arch_get_kprobe_task(ptr) ((struct task_struct *)NULL)
 #endif /* ARCH_SUPPORTS_KRETPROBES */
 /*
  * Function-return probe -
@@ -155,8 +134,8 @@ struct kretprobe_instance {
 	struct hlist_node uflist; /* either on free list or used list */
 	struct hlist_node hlist;
 	struct kretprobe *rp;
-	void *ret_addr;
-	void *stack_addr;
+	kprobe_opcode_t *ret_addr;
+	struct task_struct *task;
 };
 
 #ifdef CONFIG_KPROBES
@@ -176,7 +155,10 @@ extern void arch_copy_kprobe(struct kprobe *p);
 extern void arch_arm_kprobe(struct kprobe *p);
 extern void arch_disarm_kprobe(struct kprobe *p);
 extern void arch_remove_kprobe(struct kprobe *p);
+extern int arch_init(void);
 extern void show_registers(struct pt_regs *regs);
+extern kprobe_opcode_t *get_insn_slot(void);
+extern void free_insn_slot(kprobe_opcode_t *slot);
 
 /* Get the kprobe at this addr (if any).  Must have called lock_kprobes */
 struct kprobe *get_kprobe(void *addr);
@@ -194,8 +176,6 @@ int register_kretprobe(struct kretprobe *rp);
 void unregister_kretprobe(struct kretprobe *rp);
 
 struct kretprobe_instance *get_free_rp_inst(struct kretprobe *rp);
-struct kretprobe_instance *get_rp_inst(void *sara);
-struct kretprobe_instance *get_rp_inst_tsk(struct task_struct *tk);
 void add_rp_inst(struct kretprobe_instance *ri);
 void kprobe_flush_task(struct task_struct *tk);
 void recycle_rp_inst(struct kretprobe_instance *ri);
diff --git a/include/linux/libps2.h b/include/linux/libps2.h
index 923bdbc6d9e..a710bddda4e 100644
--- a/include/linux/libps2.h
+++ b/include/linux/libps2.h
@@ -41,6 +41,7 @@ struct ps2dev {
 
 void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
 int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
+void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
 int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
 int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command);
 int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index d6eb7b2efc0..9b6d05172ed 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -175,4 +175,50 @@ struct serio_device_id {
 };
 
 
+/* PCMCIA */
+
+struct pcmcia_device_id {
+	__u16		match_flags;
+
+	__u16		manf_id;
+	__u16 		card_id;
+
+	__u8  		func_id;
+
+	/* for real multi-function devices */
+	__u8  		function;
+
+	/* for pseude multi-function devices */
+	__u8  		device_no;
+
+	__u32 		prod_id_hash[4];
+
+	/* not matched against in kernelspace*/
+#ifdef __KERNEL__
+	const char *	prod_id[4];
+#else
+	kernel_ulong_t	prod_id[4];
+#endif
+
+	/* not matched against */
+	kernel_ulong_t	driver_info;
+#ifdef __KERNEL__
+	char *		cisfile;
+#else
+	kernel_ulong_t	cisfile;
+#endif
+};
+
+#define PCMCIA_DEV_ID_MATCH_MANF_ID	0x0001
+#define PCMCIA_DEV_ID_MATCH_CARD_ID	0x0002
+#define PCMCIA_DEV_ID_MATCH_FUNC_ID	0x0004
+#define PCMCIA_DEV_ID_MATCH_FUNCTION	0x0008
+#define PCMCIA_DEV_ID_MATCH_PROD_ID1	0x0010
+#define PCMCIA_DEV_ID_MATCH_PROD_ID2	0x0020
+#define PCMCIA_DEV_ID_MATCH_PROD_ID3	0x0040
+#define PCMCIA_DEV_ID_MATCH_PROD_ID4	0x0080
+#define PCMCIA_DEV_ID_MATCH_DEVICE_NO	0x0100
+#define PCMCIA_DEV_ID_MATCH_FAKE_CIS	0x0200
+#define PCMCIA_DEV_ID_MATCH_ANONYMOUS	0x0400
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 810bbbcee40..c3ee1ae4545 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -714,8 +714,9 @@
 #define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
 #define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
 #define PCI_DEVICE_ID_HP_CISSA		0x3220
-#define PCI_DEVICE_ID_HP_CISSB		0x3230
+#define PCI_DEVICE_ID_HP_CISSB		0x3222
 #define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
+#define PCI_DEVICE_ID_HP_CISSC		0x3230
 
 #define PCI_VENDOR_ID_PCTECH		0x1042
 #define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
@@ -1286,6 +1287,8 @@
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
+#define PCI_DEVICE_ID_NVIDIA_NVENET_14              0x0372
+#define PCI_DEVICE_ID_NVIDIA_NVENET_15              0x0373
 
 #define PCI_VENDOR_ID_IMS		0x10e0
 #define PCI_DEVICE_ID_IMS_8849		0x8849
@@ -1814,6 +1817,8 @@
 #define PCI_VENDOR_ID_ITE		0x1283
 #define PCI_DEVICE_ID_ITE_IT8172G	0x8172
 #define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
+#define PCI_DEVICE_ID_ITE_8211		0x8211
+#define PCI_DEVICE_ID_ITE_8212		0x8212
 #define PCI_DEVICE_ID_ITE_8872		0x8872
 #define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886
 
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 6d73eada277..373bd3b9b33 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -166,7 +166,7 @@ extern int pmu_i2c_simple_read(int bus, int addr,  u8* data, int len);
 extern int pmu_i2c_simple_write(int bus, int addr,  u8* data, int len);
 
 
-#ifdef CONFIG_PMAC_PBOOK
+#ifdef CONFIG_PM
 /*
  * Stuff for putting the powerbook to sleep and waking it again.
  *
@@ -208,6 +208,8 @@ struct pmu_sleep_notifier
 int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
 int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
 
+#endif /* CONFIG_PM */
+
 #define PMU_MAX_BATTERIES	2
 
 /* values for pmu_power_flags */
@@ -235,6 +237,4 @@ extern int pmu_battery_count;
 extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
 extern unsigned int pmu_power_flags;
 
-#endif /* CONFIG_PMAC_PBOOK */
-
 #endif	/* __KERNEL__ */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 9530b190316..ff48815bd3a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -608,6 +608,8 @@ struct task_struct {
 	struct list_head run_list;
 	prio_array_t *array;
 
+	unsigned short ioprio;
+
 	unsigned long sleep_avg;
 	unsigned long long timestamp, last_ran;
 	unsigned long long sched_time; /* sched_clock time spent running */
@@ -763,6 +765,7 @@ struct task_struct {
 	nodemask_t mems_allowed;
 	int cpuset_mems_generation;
 #endif
+	atomic_t fs_excl;	/* holding fs exclusive resources */
 };
 
 static inline pid_t process_group(struct task_struct *tsk)
@@ -1112,7 +1115,8 @@ extern void unhash_process(struct task_struct *p);
 
 /*
  * Protects ->fs, ->files, ->mm, ->ptrace, ->group_info, ->comm, keyring
- * subscriptions and synchronises with wait4().  Also used in procfs.
+ * subscriptions and synchronises with wait4().  Also used in procfs.  Also
+ * pins the final release of task.io_context.
  *
  * Nests both inside and outside of read_lock(&tasklist_lock).
  * It must not be nested with write_lock_irq(&tasklist_lock),
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 3a2702bbb1d..dc89116bb1c 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -19,6 +19,11 @@ static inline void secure_computing(int this_syscall)
 		__secure_computing(this_syscall);
 }
 
+static inline int has_secure_computing(struct thread_info *ti)
+{
+	return unlikely(test_ti_thread_flag(ti, TIF_SECCOMP));
+}
+
 #else /* CONFIG_SECCOMP */
 
 #if (__GNUC__ > 2)
@@ -28,6 +33,11 @@ static inline void secure_computing(int this_syscall)
 #endif
 
 #define secure_computing(x) do { } while (0)
+/* static inline to preserve typechecking */
+static inline int has_secure_computing(struct thread_info *ti)
+{
+	return 0;
+}
 
 #endif /* CONFIG_SECCOMP */
 
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 823181af6dd..3e3c1fa35b0 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -22,6 +22,7 @@ struct plat_serial8250_port {
 	unsigned int	uartclk;	/* UART clock rate */
 	unsigned char	regshift;	/* register shift */
 	unsigned char	iotype;		/* UPIO_* */
+	unsigned char	hub6;
 	unsigned int	flags;		/* UPF_* flags */
 };
 
diff --git a/include/linux/serio.h b/include/linux/serio.h
index a2d3b9ae06f..aa4d6493a03 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -83,6 +83,7 @@ static inline void serio_register_port(struct serio *serio)
 }
 
 void serio_unregister_port(struct serio *serio);
+void serio_unregister_child_port(struct serio *serio);
 void __serio_unregister_port_delayed(struct serio *serio, struct module *owner);
 static inline void serio_unregister_port_delayed(struct serio *serio)
 {
@@ -153,6 +154,11 @@ static inline int serio_pin_driver(struct serio *serio)
 	return down_interruptible(&serio->drv_sem);
 }
 
+static inline void serio_pin_driver_uninterruptible(struct serio *serio)
+{
+	down(&serio->drv_sem);
+}
+
 static inline void serio_unpin_driver(struct serio *serio)
 {
 	up(&serio->drv_sem);
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
index f5fe94e09a0..39e7ff4ffd2 100644
--- a/include/linux/usb_ch9.h
+++ b/include/linux/usb_ch9.h
@@ -6,11 +6,14 @@
  *
  * - the master/host side Linux-USB kernel driver API;
  * - the "usbfs" user space API; and
- * - (eventually) a Linux "gadget" slave/device side driver API.
+ * - the Linux "gadget" slave/device/peripheral side driver API.
  *
  * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
  * act either as a USB master/host or as a USB slave/device.  That means
- * the master and slave side APIs will benefit from working well together.
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
  */
 
 #ifndef __LINUX_USB_CH9_H
@@ -68,6 +71,18 @@
 #define USB_REQ_SET_INTERFACE		0x0B
 #define USB_REQ_SYNCH_FRAME		0x0C
 
+#define USB_REQ_SET_ENCRYPTION		0x0D	/* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION		0x0E
+#define USB_REQ_SET_HANDSHAKE		0x0F
+#define USB_REQ_GET_HANDSHAKE		0x10
+#define USB_REQ_SET_CONNECTION		0x11
+#define USB_REQ_SET_SECURITY_DATA	0x12
+#define USB_REQ_GET_SECURITY_DATA	0x13
+#define USB_REQ_SET_WUSB_DATA		0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE	0x15
+#define USB_REQ_LOOPBACK_DATA_READ	0x16
+#define USB_REQ_SET_INTERFACE_DS	0x17
+
 /*
  * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
  * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
@@ -75,10 +90,12 @@
  */
 #define USB_DEVICE_SELF_POWERED		0	/* (read only) */
 #define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE		2	/* (high speed only) */
-#define USB_DEVICE_B_HNP_ENABLE		3	/* dev may initiate HNP */
-#define USB_DEVICE_A_HNP_SUPPORT	4	/* RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* other RH port does */
+#define USB_DEVICE_TEST_MODE		2	/* (wired high speed only) */
+#define USB_DEVICE_BATTERY		2	/* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE		3	/* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE		3	/* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT	4	/* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
 #define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
 
 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
@@ -135,6 +152,13 @@ struct usb_ctrlrequest {
 #define USB_DT_OTG			0x09
 #define USB_DT_DEBUG			0x0a
 #define USB_DT_INTERFACE_ASSOCIATION	0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY			0x0c
+#define USB_DT_KEY			0x0d
+#define USB_DT_ENCRYPTION_TYPE		0x0e
+#define USB_DT_BOS			0x0f
+#define USB_DT_DEVICE_CAPABILITY	0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
 
 /* conventional codes for class-specific descriptors */
 #define USB_DT_CS_DEVICE		0x21
@@ -192,6 +216,7 @@ struct usb_device_descriptor {
 #define USB_CLASS_CSCID			0x0b	/* chip+ smart card */
 #define USB_CLASS_CONTENT_SEC		0x0d	/* content security */
 #define USB_CLASS_VIDEO			0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER	0xe0
 #define USB_CLASS_APP_SPEC		0xfe
 #define USB_CLASS_VENDOR_SPEC		0xff
 
@@ -223,6 +248,7 @@ struct usb_config_descriptor {
 #define USB_CONFIG_ATT_ONE		(1 << 7)	/* must be set */
 #define USB_CONFIG_ATT_SELFPOWER	(1 << 6)	/* self powered */
 #define USB_CONFIG_ATT_WAKEUP		(1 << 5)	/* can wakeup */
+#define USB_CONFIG_ATT_BATTERY		(1 << 4)	/* battery powered */
 
 /*-------------------------------------------------------------------------*/
 
@@ -289,6 +315,7 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_XFER_ISOC		1
 #define USB_ENDPOINT_XFER_BULK		2
 #define USB_ENDPOINT_XFER_INT		3
+#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
 
 
 /*-------------------------------------------------------------------------*/
@@ -352,12 +379,154 @@ struct usb_interface_assoc_descriptor {
 
 /*-------------------------------------------------------------------------*/
 
+/* USB_DT_SECURITY:  group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumEncryptionTypes;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY:  used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  tTKID[3];
+	__u8  bReserved;
+	__u8  bKeyData[0];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE:  bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bEncryptionType;
+#define	USB_ENC_TYPE_UNSECURE		0
+#define	USB_ENC_TYPE_WIRED		1	/* non-wireless mode */
+#define	USB_ENC_TYPE_CCM_1		2	/* aes128/cbc session */
+#define	USB_ENC_TYPE_RSA_1		3	/* rsa3072/sha1 auth */
+	__u8  bEncryptionValue;		/* use in SET_ENCRYPTION */
+	__u8  bAuthKeyIndex;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS:  group of wireless capabilities */
+struct usb_bos_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__le16 wTotalLength;
+	__u8  bNumDeviceCaps;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
+struct usb_dev_cap_header {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+};
+
+#define	USB_CAP_TYPE_WIRELESS_USB	1
+
+struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+
+	__u8  bmAttributes;
+#define	USB_WIRELESS_P2P_DRD		(1 << 1)
+#define	USB_WIRELESS_BEACON_MASK	(3 << 2)
+#define	USB_WIRELESS_BEACON_SELF	(1 << 2)
+#define	USB_WIRELESS_BEACON_DIRECTED	(2 << 2)
+#define	USB_WIRELESS_BEACON_NONE	(3 << 2)
+	__le16 wPHYRates;	/* bit rates, Mbps */
+#define	USB_WIRELESS_PHY_53		(1 << 0)	/* always set */
+#define	USB_WIRELESS_PHY_80		(1 << 1)
+#define	USB_WIRELESS_PHY_107		(1 << 2)	/* always set */
+#define	USB_WIRELESS_PHY_160		(1 << 3)
+#define	USB_WIRELESS_PHY_200		(1 << 4)	/* always set */
+#define	USB_WIRELESS_PHY_320		(1 << 5)
+#define	USB_WIRELESS_PHY_400		(1 << 6)
+#define	USB_WIRELESS_PHY_480		(1 << 7)
+	__u8  bmTFITXPowerInfo;	/* TFI power levels */
+	__u8  bmFFITXPowerInfo;	/* FFI power levels */
+	__le16 bmBandGroup;
+	__u8  bReserved;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+
+	__u8  bMaxBurst;
+	__u8  bMaxSequence;
+	__le16 wMaxStreamDelay;
+	__le16 wOverTheAirPacketSize;
+	__u8  bOverTheAirInterval;
+	__u8  bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK	0x03	/* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO		0
+#define USB_ENDPOINT_SWITCH_SWITCH	1
+#define USB_ENDPOINT_SWITCH_SCALE	2
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys.  The handshake depends on a CC.
+ */
+struct usb_handshake {
+	__u8 bMessageNumber;
+	__u8 bStatus;
+	__u8 tTKID[3];
+	__u8 bReserved;
+	__u8 CDID[16];
+	__u8 nonce[16];
+	__u8 MIC[8];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+	__u8 CHID[16];		/* persistent host id */
+	__u8 CDID[16];		/* device id (unique w/in host context) */
+	__u8 CK[16];		/* connection key */
+};
+
+/*-------------------------------------------------------------------------*/
+
 /* USB 2.0 defines three speeds, here's how Linux identifies them */
 
 enum usb_device_speed {
 	USB_SPEED_UNKNOWN = 0,			/* enumerating */
 	USB_SPEED_LOW, USB_SPEED_FULL,		/* usb 1.1 */
-	USB_SPEED_HIGH				/* usb 2.0 */
+	USB_SPEED_HIGH,				/* usb 2.0 */
+	USB_SPEED_VARIABLE,			/* wireless (usb 2.5) */
 };
 
 enum usb_device_state {
diff --git a/include/linux/usb_gadget.h b/include/linux/usb_gadget.h
index 9bba9997947..b00f127cb44 100644
--- a/include/linux/usb_gadget.h
+++ b/include/linux/usb_gadget.h
@@ -711,7 +711,7 @@ usb_gadget_disconnect (struct usb_gadget *gadget)
  * 	the hardware level driver. Most calls must be handled by
  * 	the gadget driver, including descriptor and configuration
  * 	management.  The 16 bit members of the setup data are in
- * 	cpu order. Called in_interrupt; this may not sleep.  Driver
+ * 	USB byte order. Called in_interrupt; this may not sleep.  Driver
  *	queues a response to ep0, or returns negative to stall.
  * @disconnect: Invoked after all transfers have been stopped,
  * 	when the host is disconnected.  May be called in_interrupt; this
diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h
new file mode 100644
index 00000000000..5f5a9d9bd6c
--- /dev/null
+++ b/include/linux/usb_isp116x.h
@@ -0,0 +1,47 @@
+
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+struct isp116x_platform_data {
+	/* Enable internal resistors on downstream ports */
+	unsigned sel15Kres:1;
+	/* Chip's internal clock won't be stopped in suspended state.
+	   Setting/unsetting this bit takes effect only if
+	   'remote_wakeup_enable' below is not set. */
+	unsigned clknotstop:1;
+	/* On-chip overcurrent protection */
+	unsigned oc_enable:1;
+	/* INT output polarity */
+	unsigned int_act_high:1;
+	/* INT edge or level triggered */
+	unsigned int_edge_triggered:1;
+	/* WAKEUP pin connected - NOT SUPPORTED  */
+	/* unsigned remote_wakeup_connected:1; */
+	/* Wakeup by devices on usb bus enabled */
+	unsigned remote_wakeup_enable:1;
+	/* Switch or not to switch (keep always powered) */
+	unsigned no_power_switching:1;
+	/* Ganged port power switching (0) or individual port
+	   power switching (1) */
+	unsigned power_switching_mode:1;
+	/* Given port_power, msec/2 after power on till power good */
+	u8 potpg;
+	/* Hardware reset set/clear. If implemented, this function must:
+	   if set == 0,   deassert chip's HW reset pin
+	   otherwise,     assert chip's HW reset pin       */
+	void (*reset) (struct device * dev, int set);
+	/* Hardware clock start/stop. If implemented, this function must:
+	   if start == 0,    stop the external clock
+	   otherwise,        start the external clock
+	 */
+	void (*clock) (struct device * dev, int start);
+	/* Inter-io delay (ns). The chip is picky about access timings; it
+	   expects at least:
+	   150ns delay between consecutive accesses to DATA_REG,
+	   300ns delay between access to ADDR_REG and DATA_REG
+	   OE, WE MUST NOT be changed during these intervals
+	 */
+	void (*delay) (struct device * dev, int delay);
+};
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 1262cb43c3a..d5c3fe1bf33 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -14,11 +14,13 @@ extern struct list_head inode_unused;
  * Yes, writeback.h requires sched.h
  * No, sched.h is not included from here.
  */
-static inline int current_is_pdflush(void)
+static inline int task_is_pdflush(struct task_struct *task)
 {
-	return current->flags & PF_FLUSHER;
+	return task->flags & PF_FLUSHER;
 }
 
+#define current_is_pdflush()	task_is_pdflush(current)
+
 /*
  * fs/fs-writeback.c
  */
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
new file mode 100644
index 00000000000..7fe57f957a5
--- /dev/null
+++ b/include/net/ieee80211.h
@@ -0,0 +1,882 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+#ifndef IEEE80211_H
+#define IEEE80211_H
+
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h>   /* ARRAY_SIZE */
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID   0x10
+#define IW_QUAL_LEVEL_INVALID  0x20
+#define IW_QUAL_NOISE_INVALID  0x40
+#define IW_QUAL_QUAL_UPDATED   0x1
+#define IW_QUAL_LEVEL_UPDATED  0x2
+#define IW_QUAL_NOISE_UPDATED  0x4
+#endif
+
+#define IEEE80211_DATA_LEN		2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   The figure in section 7.1.2 suggests a body size of up to 2312
+   bytes is allowed, which is a bit confusing, I suspect this
+   represents the 2304 bytes of real data, plus a possible 8 bytes of
+   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE80211_HLEN			30
+#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct ieee80211_hdr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+} __attribute__ ((packed));
+
+enum eap_type {
+	EAP_PACKET = 0,
+	EAPOL_START,
+	EAPOL_LOGOFF,
+	EAPOL_KEY,
+	EAPOL_ENCAP_ASF_ALERT
+};
+
+static const char *eap_types[] = {
+	[EAP_PACKET]		= "EAP-Packet",
+	[EAPOL_START]		= "EAPOL-Start",
+	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
+	[EAPOL_KEY]		= "EAPOL-Key",
+	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
+};
+
+static inline const char *eap_get_type(int type)
+{
+	return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
+}
+
+struct eapol {
+	u8 snap[6];
+	u16 ethertype;
+	u8 version;
+	u8 type;
+	u16 length;
+} __attribute__ ((packed));
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN    4
+
+#define MIN_FRAG_THRESHOLD     256U
+#define	MAX_FRAG_THRESHOLD     2346U
+
+/* Frame control field constants */
+#define IEEE80211_FCTL_VERS		0x0002
+#define IEEE80211_FCTL_FTYPE		0x000c
+#define IEEE80211_FCTL_STYPE		0x00f0
+#define IEEE80211_FCTL_TODS		0x0100
+#define IEEE80211_FCTL_FROMDS		0x0200
+#define IEEE80211_FCTL_MOREFRAGS	0x0400
+#define IEEE80211_FCTL_RETRY		0x0800
+#define IEEE80211_FCTL_PM		0x1000
+#define IEEE80211_FCTL_MOREDATA	0x2000
+#define IEEE80211_FCTL_WEP		0x4000
+#define IEEE80211_FCTL_ORDER		0x8000
+
+#define IEEE80211_FTYPE_MGMT		0x0000
+#define IEEE80211_FTYPE_CTL		0x0004
+#define IEEE80211_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
+#define IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define IEEE80211_STYPE_PROBE_REQ	0x0040
+#define IEEE80211_STYPE_PROBE_RESP	0x0050
+#define IEEE80211_STYPE_BEACON		0x0080
+#define IEEE80211_STYPE_ATIM		0x0090
+#define IEEE80211_STYPE_DISASSOC	0x00A0
+#define IEEE80211_STYPE_AUTH		0x00B0
+#define IEEE80211_STYPE_DEAUTH		0x00C0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL		0x00A0
+#define IEEE80211_STYPE_RTS		0x00B0
+#define IEEE80211_STYPE_CTS		0x00C0
+#define IEEE80211_STYPE_ACK		0x00D0
+#define IEEE80211_STYPE_CFEND		0x00E0
+#define IEEE80211_STYPE_CFENDACK	0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA		0x0000
+#define IEEE80211_STYPE_DATA_CFACK	0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
+#define IEEE80211_STYPE_NULLFUNC	0x0040
+#define IEEE80211_STYPE_CFACK		0x0050
+#define IEEE80211_STYPE_CFPOLL		0x0060
+#define IEEE80211_STYPE_CFACKPOLL	0x0070
+
+#define IEEE80211_SCTL_FRAG		0x000F
+#define IEEE80211_SCTL_SEQ		0xFFF0
+
+
+/* debug macros */
+
+#ifdef CONFIG_IEEE80211_DEBUG
+extern u32 ieee80211_debug_level;
+#define IEEE80211_DEBUG(level, fmt, args...) \
+do { if (ieee80211_debug_level & (level)) \
+  printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
+         in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+#else
+#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+#endif	/* CONFIG_IEEE80211_DEBUG */
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IEEE80211_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry.  xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
+ * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IEEE80211_DL_INFO          (1<<0)
+#define IEEE80211_DL_WX            (1<<1)
+#define IEEE80211_DL_SCAN          (1<<2)
+#define IEEE80211_DL_STATE         (1<<3)
+#define IEEE80211_DL_MGMT          (1<<4)
+#define IEEE80211_DL_FRAG          (1<<5)
+#define IEEE80211_DL_EAP           (1<<6)
+#define IEEE80211_DL_DROP          (1<<7)
+
+#define IEEE80211_DL_TX            (1<<8)
+#define IEEE80211_DL_RX            (1<<9)
+
+#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
+
+#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
+#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
+#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
+#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
+#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
+#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
+#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
+#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
+#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY		// enable iwspy support
+#endif
+#include <net/iw_handler.h>	// new driver API
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+
+        u8    dsap;   /* always 0xAA */
+        u8    ssap;   /* always 0xAA */
+        u8    ctrl;   /* always 0x03 */
+        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+#define WLAN_EID_RSN 48
+#define WLAN_EID_GENERIC 221
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+
+#define IEEE80211_CCK_MODULATION    (1<<0)
+#define IEEE80211_OFDM_MODULATION   (1<<1)
+
+#define IEEE80211_24GHZ_BAND     (1<<0)
+#define IEEE80211_52GHZ_BAND     (1<<1)
+
+#define IEEE80211_CCK_RATE_1MB		        0x02
+#define IEEE80211_CCK_RATE_2MB		        0x04
+#define IEEE80211_CCK_RATE_5MB		        0x0B
+#define IEEE80211_CCK_RATE_11MB		        0x16
+#define IEEE80211_OFDM_RATE_6MB		        0x0C
+#define IEEE80211_OFDM_RATE_9MB		        0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK	        0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
+        IEEE80211_CCK_RATE_5MB_MASK | \
+        IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK | \
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
+	IEEE80211_OFDM_RATE_9MB_MASK  | \
+	IEEE80211_OFDM_RATE_18MB_MASK | \
+	IEEE80211_OFDM_RATE_36MB_MASK | \
+	IEEE80211_OFDM_RATE_48MB_MASK | \
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+                                IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES	    8
+#define IEEE80211_NUM_CCK_RATES	            4
+#define IEEE80211_OFDM_SHIFT_MASK_A         4
+
+
+
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ *       information for frames received.  Not setting these will not cause
+ *       any adverse affects. */
+struct ieee80211_rx_stats {
+	u32 mac_time;
+	s8 rssi;
+	u8 signal;
+	u8 noise;
+	u16 rate; /* in 100 kbps */
+	u8 received_channel;
+	u8 control;
+	u8 mask;
+	u8 freq;
+	u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+	unsigned long first_frag_time;
+	unsigned int seq;
+	unsigned int last_frag;
+	struct sk_buff *skb;
+	u8 src_addr[ETH_ALEN];
+	u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+	unsigned int tx_unicast_frames;
+	unsigned int tx_multicast_frames;
+	unsigned int tx_fragments;
+	unsigned int tx_unicast_octets;
+	unsigned int tx_multicast_octets;
+	unsigned int tx_deferred_transmissions;
+	unsigned int tx_single_retry_frames;
+	unsigned int tx_multiple_retry_frames;
+	unsigned int tx_retry_limit_exceeded;
+	unsigned int tx_discards;
+	unsigned int rx_unicast_frames;
+	unsigned int rx_multicast_frames;
+	unsigned int rx_fragments;
+	unsigned int rx_unicast_octets;
+	unsigned int rx_multicast_octets;
+	unsigned int rx_fcs_errors;
+	unsigned int rx_discards_no_buffer;
+	unsigned int tx_discards_wrong_sa;
+	unsigned int rx_discards_undecryptable;
+	unsigned int rx_message_in_msg_fragments;
+	unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_device;
+
+#define SEC_KEY_1         (1<<0)
+#define SEC_KEY_2         (1<<1)
+#define SEC_KEY_3         (1<<2)
+#define SEC_KEY_4         (1<<3)
+#define SEC_ACTIVE_KEY    (1<<4)
+#define SEC_AUTH_MODE     (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL         (1<<7)
+#define SEC_ENABLED       (1<<8)
+
+#define SEC_LEVEL_0      0 /* None */
+#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+	u16 active_key:2,
+            enabled:1,
+	    auth_mode:2,
+            auth_algo:4,
+            unicast_uses_group:1;
+	u8 key_sizes[WEP_KEYS];
+	u8 keys[WEP_KEYS][WEP_KEY_LEN];
+	u8 level;
+	u16 flags;
+} __attribute__ ((packed));
+
+
+/*
+
+ 802.11 data frame from AP
+
+      ,-------------------------------------------------------------------.
+Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+      |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+      |      | tion | (BSSID) |         |         | ence |  data   |      |
+      `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID       0
+#define MFIE_TYPE_RATES      1
+#define MFIE_TYPE_FH_SET     2
+#define MFIE_TYPE_DS_SET     3
+#define MFIE_TYPE_CF_SET     4
+#define MFIE_TYPE_TIM        5
+#define MFIE_TYPE_IBSS_SET   6
+#define MFIE_TYPE_CHALLENGE  16
+#define MFIE_TYPE_RSN	     48
+#define MFIE_TYPE_RATES_EX   50
+#define MFIE_TYPE_GENERIC    221
+
+struct ieee80211_info_element_hdr {
+	u8 id;
+	u8 len;
+} __attribute__ ((packed));
+
+struct ieee80211_info_element {
+	u8 id;
+	u8 len;
+	u8 data[0];
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+	u16 auth_algorithm;
+	u16 auth_sequence;
+	u16 beacon_interval;
+	u16 capability;
+	u8 current_ap[ETH_ALEN];
+	u16 listen_interval;
+	struct {
+		u16 association_id:14, reserved:2;
+	} __attribute__ ((packed));
+	u32 time_stamp[2];
+	u16 reason;
+	u16 status;
+*/
+
+struct ieee80211_authentication {
+	struct ieee80211_header_data header;
+	u16 algorithm;
+	u16 transaction;
+	u16 status;
+	struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+
+struct ieee80211_probe_response {
+	struct ieee80211_header_data header;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 capability;
+	struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_request_frame {
+	u16 capability;
+	u16 listen_interval;
+	u8 current_ap[ETH_ALEN];
+	struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_response_frame {
+	struct ieee80211_hdr_3addr header;
+	u16 capability;
+	u16 status;
+	u16 aid;
+	struct ieee80211_info_element info_element; /* supported rates */
+} __attribute__ ((packed));
+
+
+struct ieee80211_txb {
+	u8 nr_frags;
+	u8 encrypted;
+	u16 reserved;
+	u16 frag_size;
+	u16 payload_size;
+	struct sk_buff *fragments[0];
+};
+
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES		  42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
+/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates.  Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH                  ((u8)12)
+#define MAX_RATES_EX_LENGTH               ((u8)16)
+#define MAX_NETWORK_COUNT                  128
+
+#define CRC_LENGTH                 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM    (1<<1)
+#define NETWORK_HAS_CCK     (1<<2)
+
+struct ieee80211_network {
+	/* These entries are used to identify a unique network */
+	u8 bssid[ETH_ALEN];
+	u8 channel;
+	/* Ensure null-terminated for any debug msgs */
+	u8 ssid[IW_ESSID_MAX_SIZE + 1];
+	u8 ssid_len;
+
+	/* These are network statistics */
+	struct ieee80211_rx_stats stats;
+	u16 capability;
+	u8 rates[MAX_RATES_LENGTH];
+	u8 rates_len;
+	u8 rates_ex[MAX_RATES_EX_LENGTH];
+	u8 rates_ex_len;
+	unsigned long last_scanned;
+	u8 mode;
+	u8 flags;
+	u32 last_associate;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 listen_interval;
+	u16 atim_window;
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8 rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
+	struct list_head list;
+};
+
+enum ieee80211_state {
+	IEEE80211_UNINITIALIZED = 0,
+	IEEE80211_INITIALIZED,
+	IEEE80211_ASSOCIATING,
+	IEEE80211_ASSOCIATED,
+	IEEE80211_AUTHENTICATING,
+	IEEE80211_AUTHENTICATED,
+	IEEE80211_SHUTDOWN
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+
+
+extern inline int is_broadcast_ether_addr(const u8 *addr)
+{
+	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct ieee80211_device {
+	struct net_device *dev;
+
+	/* Bookkeeping structures */
+	struct net_device_stats stats;
+	struct ieee80211_stats ieee_stats;
+
+	/* Probe / Beacon management */
+	struct list_head network_free_list;
+	struct list_head network_list;
+	struct ieee80211_network *networks;
+	int scans;
+	int scan_age;
+
+	int iw_mode; /* operating mode (IW_MODE_*) */
+
+	spinlock_t lock;
+
+	int tx_headroom; /* Set to size of any additional room needed at front
+			  * of allocated Tx SKBs */
+	u32 config;
+
+	/* WEP and other encryption related settings at the device level */
+	int open_wep; /* Set to 1 to allow unencrypted frames */
+
+	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+				 * WEP key changes */
+
+	/* If the host performs {en,de}cryption, then set to 1 */
+	int host_encrypt;
+	int host_decrypt;
+	int ieee802_1x; /* is IEEE 802.1X used */
+
+	/* WPA data */
+	int wpa_enabled;
+	int drop_unencrypted;
+	int tkip_countermeasures;
+	int privacy_invoked;
+	size_t wpa_ie_len;
+	u8 *wpa_ie;
+
+	struct list_head crypt_deinit_list;
+	struct ieee80211_crypt_data *crypt[WEP_KEYS];
+	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+	struct timer_list crypt_deinit_timer;
+
+	int bcrx_sta_key; /* use individual keys to override default keys even
+			   * with RX of broad/multicast frames */
+
+	/* Fragmentation structures */
+	struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
+	unsigned int frag_next_idx;
+	u16 fts; /* Fragmentation Threshold */
+
+	/* Association info */
+	u8 bssid[ETH_ALEN];
+
+	enum ieee80211_state state;
+
+	int mode;       /* A, B, G */
+	int modulation; /* CCK, OFDM */
+	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
+	int abg_ture;   /* ABG flag              */
+
+	/* Callback functions */
+	void (*set_security)(struct net_device *dev,
+			     struct ieee80211_security *sec);
+	int (*hard_start_xmit)(struct ieee80211_txb *txb,
+			       struct net_device *dev);
+	int (*reset_port)(struct net_device *dev);
+
+	/* This must be the last item so that it points to the data
+	 * allocated beyond this structure by alloc_ieee80211 */
+	u8 priv[0];
+};
+
+#define IEEE_A            (1<<0)
+#define IEEE_B            (1<<1)
+#define IEEE_G            (1<<2)
+#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+
+extern inline void *ieee80211_priv(struct net_device *dev)
+{
+	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
+}
+
+extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+{
+	/* Single white space is for Linksys APs */
+	if (essid_len == 1 && essid[0] == ' ')
+		return 1;
+
+	/* Otherwise, if the entire essid is 0, we assume it is hidden */
+	while (essid_len) {
+		essid_len--;
+		if (essid[essid_len] != '\0')
+			return 0;
+	}
+
+	return 1;
+}
+
+extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+{
+	/*
+	 * It is possible for both access points and our device to support
+	 * combinations of modes, so as long as there is one valid combination
+	 * of ap/device supported modes, then return success
+	 *
+	 */
+	if ((mode & IEEE_A) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_G) &&
+	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	if ((mode & IEEE_B) &&
+	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
+	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
+		return 1;
+
+	return 0;
+}
+
+extern inline int ieee80211_get_hdrlen(u16 fc)
+{
+	int hdrlen = 24;
+
+	switch (WLAN_FC_GET_TYPE(fc)) {
+	case IEEE80211_FTYPE_DATA:
+		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+			hdrlen = 30; /* Addr4 */
+		break;
+	case IEEE80211_FTYPE_CTL:
+		switch (WLAN_FC_GET_STYPE(fc)) {
+		case IEEE80211_STYPE_CTS:
+		case IEEE80211_STYPE_ACK:
+			hdrlen = 10;
+			break;
+		default:
+			hdrlen = 16;
+			break;
+		}
+		break;
+	}
+
+	return hdrlen;
+}
+
+
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
+
+extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
+
+/* ieee80211_tx.c */
+
+
+extern int ieee80211_xmit(struct sk_buff *skb,
+			  struct net_device *dev);
+extern void ieee80211_txb_free(struct ieee80211_txb *);
+
+
+/* ieee80211_rx.c */
+extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+			struct ieee80211_rx_stats *rx_stats);
+extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+			     struct ieee80211_hdr *header,
+			     struct ieee80211_rx_stats *stats);
+
+/* iee80211_wx.c */
+extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+				   struct iw_request_info *info,
+				   union iwreq_data *wrqu, char *key);
+
+
+extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+{
+	ieee->scans++;
+}
+
+extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+{
+	return ieee->scans;
+}
+
+static inline const char *escape_essid(const char *essid, u8 essid_len) {
+	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+	const char *s = essid;
+	char *d = escaped;
+
+	if (ieee80211_is_empty_essid(essid, essid_len)) {
+		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+		return escaped;
+	}
+
+	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
+	while (essid_len--) {
+		if (*s == '\0') {
+			*d++ = '\\';
+			*d++ = '0';
+			s++;
+		} else {
+			*d++ = *s++;
+		}
+	}
+	*d = '\0';
+	return escaped;
+}
+
+#endif /* IEEE80211_H */
diff --git a/include/pcmcia/ciscode.h b/include/pcmcia/ciscode.h
index 2000b43ece9..da19c297dd6 100644
--- a/include/pcmcia/ciscode.h
+++ b/include/pcmcia/ciscode.h
@@ -112,6 +112,8 @@
 
 #define MANFID_TDK			0x0105
 #define PRODID_TDK_CF010		0x0900
+#define PRODID_TDK_NP9610		0x0d0a
+#define PRODID_TDK_MN3200		0x0e0a
 #define PRODID_TDK_GN3410		0x4815
 
 #define MANFID_TOSHIBA			0x0098
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 8d8643adc78..b42ddc0c114 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -396,7 +396,6 @@ struct pcmcia_socket;
 int pcmcia_access_configuration_register(client_handle_t handle, conf_reg_t *reg);
 int pcmcia_deregister_client(client_handle_t handle);
 int pcmcia_get_configuration_info(client_handle_t handle, config_info_t *config);
-int pcmcia_get_card_services_info(servinfo_t *info);
 int pcmcia_get_first_window(window_handle_t *win, win_req_t *req);
 int pcmcia_get_next_window(window_handle_t *win, win_req_t *req);
 int pcmcia_get_status(client_handle_t handle, cs_status_t *status);
@@ -417,7 +416,6 @@ int pcmcia_suspend_card(struct pcmcia_socket *skt);
 int pcmcia_resume_card(struct pcmcia_socket *skt);
 int pcmcia_eject_card(struct pcmcia_socket *skt);
 int pcmcia_insert_card(struct pcmcia_socket *skt);
-int pcmcia_report_error(client_handle_t handle, error_info_t *err);
 
 struct pcmcia_socket * pcmcia_get_socket(struct pcmcia_socket *skt);
 void pcmcia_put_socket(struct pcmcia_socket *skt);
diff --git a/include/pcmcia/device_id.h b/include/pcmcia/device_id.h
new file mode 100644
index 00000000000..346d81ece28
--- /dev/null
+++ b/include/pcmcia/device_id.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (2003-2004) 	Dominik Brodowski <linux@brodo.de>
+ *				David Woodhouse
+ *
+ * License: GPL v2
+ */
+
+#define PCMCIA_DEVICE_MANF_CARD(manf, card) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID, \
+	.manf_id = (manf), \
+	.card_id = (card), }
+
+#define PCMCIA_DEVICE_FUNC_ID(func) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FUNC_ID, \
+	.func_id = (func), }
+
+#define PCMCIA_DEVICE_PROD_ID1(v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1, \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID2(v2, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID12(v1, v2, vh1, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID13(v1, v3, vh1, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { (v1), NULL, (v3), NULL }, \
+	.prod_id_hash = { (vh1), 0, (vh3), 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID14(v1, v4, vh1, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), NULL, NULL, (v4) }, \
+	.prod_id_hash = { (vh1), 0, 0, (vh4) }, }
+
+#define PCMCIA_DEVICE_PROD_ID123(v1, v2, v3, vh1, vh2, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, }
+
+#define PCMCIA_DEVICE_PROD_ID124(v1, v2, v4, vh1, vh2, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), (v2), NULL, (v4) }, \
+	.prod_id_hash = { (vh1), (vh2), 0, (vh4) }, }
+
+#define PCMCIA_DEVICE_PROD_ID134(v1, v3, v4, vh1, vh3, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), NULL, (v3), (v4) }, \
+	.prod_id_hash = { (vh1), 0, (vh3), (vh4) }, }
+
+#define PCMCIA_DEVICE_PROD_ID1234(v1, v2, v3, v4, vh1, vh2, vh3, vh4) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4, \
+	.prod_id = { (v1), (v2), (v3), (v4) }, \
+	.prod_id_hash = { (vh1), (vh2), (vh3), (vh4) }, }
+
+
+/* multi-function devices */
+
+#define PCMCIA_MFC_DEVICE_MANF_CARD(mfc, manf, card) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID1(mfc, v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID2(mfc, v2, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID12(mfc, v1, v2, vh1, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID13(mfc, v1, v3, vh1, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), NULL, (v3), NULL }, \
+	.prod_id_hash = { (vh1), 0, (vh3), 0 }, \
+	.function = (mfc), }
+
+#define PCMCIA_MFC_DEVICE_PROD_ID123(mfc, v1, v2, v3, vh1, vh2, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, \
+	.function = (mfc), }
+
+/* pseudo multi-function devices */
+
+#define PCMCIA_PFC_DEVICE_MANF_CARD(mfc, manf, card) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID1(mfc, v1, vh1) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), NULL, NULL, NULL }, \
+	.prod_id_hash = { (vh1), 0, 0, 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID2(mfc, v2, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID12(mfc, v1, v2, vh1, vh2) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID13(mfc, v1, v3, vh1, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), NULL, (v3), NULL }, \
+	.prod_id_hash = { (vh1), 0, (vh3), 0 }, \
+	.device_no = (mfc), }
+
+#define PCMCIA_PFC_DEVICE_PROD_ID123(mfc, v1, v2, v3, vh1, vh2, vh3) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, \
+	.device_no = (mfc), }
+
+/* cards needing a CIS override */
+
+#define PCMCIA_DEVICE_CIS_MANF_CARD(manf, card, _cisfile) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_DEVICE_CIS_PROD_ID12(v1, v2, vh1, vh2, _cisfile) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_DEVICE_CIS_PROD_ID123(v1, v2, v3, vh1, vh2, vh3, _cisfile) { \
+	.match_flags = PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID3, \
+	.prod_id = { (v1), (v2), (v3), NULL },\
+	.prod_id_hash = { (vh1), (vh2), (vh3), 0 }, \
+	.cisfile = (_cisfile)}
+
+
+#define PCMCIA_DEVICE_CIS_PROD_ID2(v2, vh2, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2, \
+	.prod_id = { NULL, (v2), NULL, NULL },  \
+	.prod_id_hash = { 0, (vh2), 0, 0 }, \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_PFC_DEVICE_CIS_PROD_ID12(mfc, v1, v2, vh1, vh2, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_DEVICE_NO, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 },\
+	.device_no = (mfc), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_MFC_DEVICE_CIS_MANF_CARD(mfc, manf, card, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_MANF_ID| \
+			PCMCIA_DEV_ID_MATCH_CARD_ID| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.manf_id = (manf), \
+	.card_id = (card), \
+	.function = (mfc), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_MFC_DEVICE_CIS_PROD_ID12(mfc, v1, v2, vh1, vh2, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID1| \
+			PCMCIA_DEV_ID_MATCH_PROD_ID2| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { (v1), (v2), NULL, NULL }, \
+	.prod_id_hash = { (vh1), (vh2), 0, 0 }, \
+	.function = (mfc), \
+	.cisfile = (_cisfile)}
+
+#define PCMCIA_MFC_DEVICE_CIS_PROD_ID4(mfc, v4, vh4, _cisfile) { \
+	.match_flags =  PCMCIA_DEV_ID_MATCH_FAKE_CIS | \
+			PCMCIA_DEV_ID_MATCH_PROD_ID4| \
+			PCMCIA_DEV_ID_MATCH_FUNCTION, \
+	.prod_id = { NULL, NULL, NULL, (v4) }, \
+	.prod_id_hash = { 0, 0, 0, (vh4) }, \
+	.function = (mfc), \
+	.cisfile = (_cisfile)}
+
+
+#define PCMCIA_DEVICE_NULL { .match_flags = 0, }
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index 312fd958c90..2b52553f2d9 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -18,6 +18,8 @@
 
 #include <pcmcia/bulkmem.h>
 #include <pcmcia/cs_types.h>
+#include <pcmcia/device_id.h>
+#include <linux/mod_devicetable.h>
 
 typedef struct tuple_parse_t {
     tuple_t		tuple;
@@ -129,12 +131,11 @@ typedef struct dev_link_t {
 
 struct pcmcia_socket;
 
-extern struct bus_type pcmcia_bus_type;
-
 struct pcmcia_driver {
 	dev_link_t		*(*attach)(void);
 	void			(*detach)(dev_link_t *);
 	struct module		*owner;
+	struct pcmcia_device_id	*id_table;
 	struct device_driver	drv;
 };
 
@@ -173,7 +174,9 @@ struct pcmcia_device {
 	u8			has_manf_id:1;
 	u8			has_card_id:1;
 	u8			has_func_id:1;
-	u8			reserved:5;
+
+	u8			allow_func_id_match:1;
+	u8			reserved:4;
 
 	u8			func_id;
 	u16			manf_id;
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 67b867f31fe..0f7aacc33fe 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -15,10 +15,12 @@
 #ifndef _LINUX_SS_H
 #define _LINUX_SS_H
 
+#include <linux/config.h>
+#include <linux/device.h>
+
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/bulkmem.h>
-#include <linux/device.h>
 
 /* Definitions for card status flags for GetStatus */
 #define SS_WRPROT	0x0001
@@ -171,7 +173,7 @@ typedef struct window_t {
 
 struct config_t;
 struct pcmcia_callback;
-
+struct user_info_t;
 
 struct pcmcia_socket {
 	struct module			*owner;
@@ -216,8 +218,9 @@ struct pcmcia_socket {
 
 	/* is set to one if resource setup is done using adjust_resource_info() */
 	u8				resource_setup_old:1;
+	u8				resource_setup_new:1;
 
-	u8				reserved:6;
+	u8				reserved:5;
 
 	/* socket operations */
 	struct pccard_operations *	ops;
@@ -241,9 +244,32 @@ struct pcmcia_socket {
 	unsigned int			thread_events;
 
 	/* pcmcia (16-bit) */
-	struct pcmcia_bus_socket	*pcmcia;
 	struct pcmcia_callback		*callback;
 
+#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
+	struct list_head		devices_list;	/*  PCMCIA devices */
+	u8				device_count;	/* the number of devices, used
+							 * only internally and subject
+							 * to incorrectness and change */
+
+	struct {
+		u8			present:1,	/* PCMCIA card is present in socket */
+					busy:1,		/* "master" ioctl is used */
+					dead:1,		/* pcmcia module is being unloaded */
+					device_add_pending:1, /* a pseudo-multifunction-device
+							       * add event is pending */
+					reserved:4;
+	} 				pcmcia_state;
+
+	struct work_struct		device_add;	/* for adding further pseudo-multifunction
+							 * devices */
+
+#ifdef CONFIG_PCMCIA_IOCTL
+	struct user_info_t		*user;
+	wait_queue_head_t		queue;
+#endif
+#endif
+
 	/* cardbus (32-bit) */
 #ifdef CONFIG_CARDBUS
 	struct resource *		cb_cis_res;