diff options
author | David S. Miller <davem@davemloft.net> | 2009-11-24 15:01:29 -0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-11-24 15:01:29 -0800 |
commit | 4ba3eb034fb6fd1990ccc5a6d71d5abcda37b905 (patch) | |
tree | 0789ba36d96dba330416a1e6a9a68e891a78802a /include | |
parent | 35700212b45ea9f98fa682cfc1bc1a67c9ccc34b (diff) | |
parent | 18b6c9a2213d3b6e0212e8b225abf95f7564206a (diff) |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/ieee80211.h | 16 | ||||
-rw-r--r-- | include/linux/if.h | 1 | ||||
-rw-r--r-- | include/linux/rfkill.h | 3 | ||||
-rw-r--r-- | include/linux/spi/wl12xx.h | 1 | ||||
-rw-r--r-- | include/net/cfg80211.h | 85 | ||||
-rw-r--r-- | include/net/mac80211.h | 51 |
6 files changed, 111 insertions, 46 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 49b1abd2fe9..afa8e0ac27a 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -115,7 +115,6 @@ #define IEEE80211_MAX_SSID_LEN 32 #define IEEE80211_MAX_MESH_ID_LEN 32 -#define IEEE80211_MESH_CONFIG_LEN 7 #define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_TID_MASK 0x000F @@ -555,6 +554,21 @@ struct ieee80211_tim_ie { } __attribute__ ((packed)); /** + * struct ieee80211_meshconf_ie + * + * This structure refers to "Mesh Configuration information element" + */ +struct ieee80211_meshconf_ie { + u8 meshconf_psel; + u8 meshconf_pmetric; + u8 meshconf_congest; + u8 meshconf_synch; + u8 meshconf_auth; + u8 meshconf_form; + u8 meshconf_cap; +} __attribute__ ((packed)); + +/** * struct ieee80211_rann_ie * * This structure refers to "Root Announcement information element" diff --git a/include/linux/if.h b/include/linux/if.h index 3b2a46bf8f8..3a9f410a296 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -70,6 +70,7 @@ #define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to * release skb->dst */ +#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 3392c59d270..97059d08a62 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -35,6 +35,8 @@ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @RFKILL_TYPE_GPS: switch is on a GPS device. + * @RFKILL_TYPE_FM: switch is on a FM radio device. * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { @@ -45,6 +47,7 @@ enum rfkill_type { RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, RFKILL_TYPE_GPS, + RFKILL_TYPE_FM, NUM_RFKILL_TYPES, }; diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h index 11430cab2aa..aed64ed3dc8 100644 --- a/include/linux/spi/wl12xx.h +++ b/include/linux/spi/wl12xx.h @@ -26,6 +26,7 @@ struct wl12xx_platform_data { void (*set_power)(bool enable); + bool use_eeprom; }; #endif diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 21710fc17ea..a6492e9bca9 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1108,27 +1108,50 @@ struct cfg80211_ops { */ /** - * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> - * @custom_regulatory: tells us the driver for this device + * enum wiphy_flags - wiphy capability flags + * + * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device * has its own custom regulatory domain and cannot identify the * ISO / IEC 3166 alpha2 it belongs to. When this is enabled * we will disregard the first regulatory hint (when the * initiator is %REGDOM_SET_BY_CORE). - * @strict_regulatory: tells us the driver for this device will ignore - * regulatory domain settings until it gets its own regulatory domain - * via its regulatory_hint(). After its gets its own regulatory domain - * it will only allow further regulatory domain settings to further - * enhance compliance. For example if channel 13 and 14 are disabled - * by this regulatory domain no user regulatory domain can enable these - * channels at a later time. This can be used for devices which do not - * have calibration information gauranteed for frequencies or settings - * outside of its regulatory domain. - * @disable_beacon_hints: enable this if your driver needs to ensure that - * passive scan flags and beaconing flags may not be lifted by cfg80211 - * due to regulatory beacon hints. For more information on beacon + * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will + * ignore regulatory domain settings until it gets its own regulatory + * domain via its regulatory_hint(). After its gets its own regulatory + * domain it will only allow further regulatory domain settings to + * further enhance compliance. For example if channel 13 and 14 are + * disabled by this regulatory domain no user regulatory domain can + * enable these channels at a later time. This can be used for devices + * which do not have calibration information gauranteed for frequencies + * or settings outside of its regulatory domain. + * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure + * that passive scan flags and beaconing flags may not be lifted by + * cfg80211 due to regulatory beacon hints. For more information on beacon * hints read the documenation for regulatory_hint_found_beacon() + * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this + * wiphy at all + * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled + * by default -- this flag will be set depending on the kernel's default + * on wiphy_new(), but can be changed by the driver if it has a good + * reason to override the default + * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station + * on a VLAN interface) + * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station + */ +enum wiphy_flags { + WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), + WIPHY_FLAG_STRICT_REGULATORY = BIT(1), + WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + WIPHY_FLAG_NETNS_OK = BIT(3), + WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), + WIPHY_FLAG_4ADDR_AP = BIT(5), + WIPHY_FLAG_4ADDR_STATION = BIT(6), +}; + +/** + * struct wiphy - wireless hardware description + * @idx: the wiphy index assigned to this item + * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> * @reg_notifier: the driver's regulatory notification callback * @regd: the driver's regulatory domain, if one was requested via * the regulatory_hint() API. This can be used by the driver @@ -1143,11 +1166,6 @@ struct cfg80211_ops { * -1 = fragmentation disabled, only odd values >= 256 used * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled * @net: the network namespace this wiphy currently lives in - * @netnsok: if set to false, do not allow changing the netns of this - * wiphy at all - * @ps_default: default for powersave, will be set depending on the - * kernel's default on wiphy_new(), but can be changed by the - * driver if it has a good reason to override the default */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -1158,12 +1176,7 @@ struct wiphy { /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ u16 interface_modes; - bool custom_regulatory; - bool strict_regulatory; - bool disable_beacon_hints; - - bool netnsok; - bool ps_default; + u32 flags; enum cfg80211_signal_type signal_type; @@ -1358,6 +1371,10 @@ struct cfg80211_cached_keys; * @ssid_len: (private) Used by the internal configuration code * @wext: (private) Used by the internal wireless extensions compat code * @wext_bssid: (private) Used by the internal wireless extensions compat code + * @use_4addr: indicates 4addr mode is used on this interface, must be + * set by driver (if supported) on add_interface BEFORE registering the + * netdev and may otherwise be used by driver read-only, will be update + * by cfg80211 on change_interface */ struct wireless_dev { struct wiphy *wiphy; @@ -1371,6 +1388,8 @@ struct wireless_dev { struct work_struct cleanup_work; + bool use_4addr; + /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len; @@ -1820,6 +1839,18 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); /** + * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + * + * When a pending authentication had no action yet, the driver may decide + * to not send a deauth frame, but in that case must calls this function + * to tell cfg80211 about this decision. It is only valid to call this + * function within the deauth() callback. + */ +void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); + +/** * cfg80211_send_rx_assoc - notification of processed association * @dev: network device * @buf: (re)association response frame (header + body) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2c10eac637d..3754ea405c8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -219,7 +219,7 @@ struct ieee80211_bss_conf { * * These flags are used with the @flags member of &ieee80211_tx_info. * - * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame. * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence * number to this frame, taking care of not overwriting the fragment * number and increasing the sequence number only when the @@ -390,10 +390,12 @@ struct ieee80211_tx_rate { * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers - * @ampdu_ack_len: number of aggregated frames. + * @ampdu_ack_len: number of acked aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ack_signal: signal strength of the ACK frame */ struct ieee80211_tx_info { @@ -428,7 +430,8 @@ struct ieee80211_tx_info { u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - /* 8 bytes free */ + u8 ampdu_len; + /* 7 bytes free */ } status; struct { struct ieee80211_tx_rate driver_rates[ @@ -852,6 +855,19 @@ enum ieee80211_tkip_key_type { * any particular flags. There are some exceptions to this rule, * however, so you are advised to review these flags carefully. * + * @IEEE80211_HW_HAS_RATE_CONTROL: + * The hardware or firmware includes rate control, and cannot be + * controlled by the stack. As such, no rate control algorithm + * should be instantiated, and the TX rate reported to userspace + * will be taken from the TX status instead of the rate control + * algorithm. + * Note that this requires that the driver implement a number of + * callbacks so it has the correct information, it needs to have + * the @set_rts_threshold callback and must look at the BSS config + * @use_cts_prot for G/N protection, @use_short_slot for slot + * timing in 2.4 GHz and @use_short_preamble for preambles for + * CCK frames. + * * @IEEE80211_HW_RX_INCLUDES_FCS: * Indicates that received frames passed to the stack include * the FCS at the end. @@ -910,6 +926,7 @@ enum ieee80211_tkip_key_type { * avoid waking up cpu. */ enum ieee80211_hw_flags { + IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, @@ -1505,6 +1522,7 @@ struct ieee80211_ops { void (*reset_tsf)(struct ieee80211_hw *hw); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn); @@ -2026,8 +2044,7 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, /** * ieee80211_start_tx_ba_session - Start a tx Block Ack session. - * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @ra: receiver address of the BA session recipient + * @sta: the station for which to start a BA session * @tid: the TID to BA on. * * Return: success if addBA request was sent, failure otherwise @@ -2036,22 +2053,22 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw, * the need to start aggregation on a certain RA/TID, the session level * will be managed by the mac80211. */ -int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid); +int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid); /** * ieee80211_start_tx_ba_cb - low level driver ready to aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the TID to BA on. * * This function must be called by low level driver once it has * finished with preparations for the BA session. */ -void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); +void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid); /** * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the TID to BA on. * @@ -2059,13 +2076,12 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); * finished with preparations for the BA session. * This version of the function is IRQ-safe. */ -void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, u16 tid); /** * ieee80211_stop_tx_ba_session - Stop a Block Ack session. - * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @ra: receiver address of the BA session recipient + * @sta: the station whose BA session to stop * @tid: the TID to stop BA. * @initiator: if indicates initiator DELBA frame will be sent. * @@ -2075,24 +2091,23 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, * the need to stop aggregation on a certain RA/TID, the session level * will be managed by the mac80211. */ -int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, - u8 *ra, u16 tid, +int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid, enum ieee80211_back_parties initiator); /** * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the desired TID to BA on. * * This function must be called by low level driver once it has * finished with preparations for the BA session tear down. */ -void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); +void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid); /** * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate. - * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf * @ra: receiver address of the BA session recipient. * @tid: the desired TID to BA on. * @@ -2100,7 +2115,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); * finished with preparations for the BA session tear down. * This version of the function is IRQ-safe. */ -void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, +void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, u16 tid); /** |