Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
	drivers/net/wireless/ath/ath9k/hw.c

3 files changed, 19 insertions, 47 deletions

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index c37d67add09..e474f6e780c 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -369,6 +369,11 @@
  *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
  *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
  *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+ *	Background scan period can optionally be
+ *	specified in %NL80211_ATTR_BG_SCAN_PERIOD,
+ *	if not specified default background scan configuration
+ *	in driver is used and if period value is 0, bg scan will be disabled.
+ *	This attribute is ignored if driver does not support roam scan.
  *	It is also sent as an event, with the BSSID and response IEs when the
  *	connection is established or failed to be established. This can be
  *	determined by the STATUS_CODE attribute.
@@ -1207,6 +1212,9 @@ enum nl80211_commands {
  *	this attribute is (depending on the driver capabilities) added to
  *	received frames indicated with %NL80211_CMD_FRAME.
  *
+ * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds
+ *      or 0 to disable background scan.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1456,6 +1464,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_RX_SIGNAL_DBM,
 
+	NL80211_ATTR_BG_SCAN_PERIOD,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 57c9fddc2ac..69b7ad3a992 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1203,6 +1203,8 @@ struct cfg80211_ibss_params {
  * @key_idx: index of WEP key for shared key authentication
  * @key: WEP key for shared key authentication
  * @flags:  See &enum cfg80211_assoc_req_flags
+ * @bg_scan_period:  Background scan period in seconds
+ *   or -1 to indicate that default value is to be used.
  * @ht_capa:  HT Capabilities over-rides.  Values set in ht_capa_mask
  *   will be used in ht_capa.  Un-supported values will be ignored.
  * @ht_capa_mask:  The bits of ht_capa which are to be used.
@@ -1220,6 +1222,7 @@ struct cfg80211_connect_params {
 	const u8 *key;
 	u8 key_len, key_idx;
 	u32 flags;
+	int bg_scan_period;
 	struct ieee80211_ht_cap ht_capa;
 	struct ieee80211_ht_cap ht_capa_mask;
 };
@@ -2694,7 +2697,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
  * @wiphy: the wiphy reporting the BSS
  * @channel: The channel the frame was received on
  * @bssid: the BSSID of the BSS
- * @timestamp: the TSF timestamp sent by the peer
+ * @tsf: the TSF sent by the peer in the beacon/probe response (or 0)
  * @capability: the capability field sent by the peer
  * @beacon_interval: the beacon interval announced by the peer
  * @ie: additional IEs sent by the peer
@@ -2710,9 +2713,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
 struct cfg80211_bss * __must_check
 cfg80211_inform_bss(struct wiphy *wiphy,
 		    struct ieee80211_channel *channel,
-		    const u8 *bssid,
-		    u64 timestamp, u16 capability, u16 beacon_interval,
-		    const u8 *ie, size_t ielen,
+		    const u8 *bssid, u64 tsf, u16 capability,
+		    u16 beacon_interval, const u8 *ie, size_t ielen,
 		    s32 signal, gfp_t gfp);
 
 struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f7917f765cb..9a012be615f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -229,7 +229,8 @@ enum ieee80211_rssi_event {
  *	valid in station mode only while @assoc is true and if also
  *	requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
  *	@ps_dtim_period)
- * @timestamp: beacon timestamp
+ * @last_tsf: last beacon's/probe response's TSF timestamp (could be old
+ *	as it may have been received during scanning long ago)
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
  * @basic_rates: bitmap of basic rates, each bit stands for an
@@ -276,7 +277,7 @@ struct ieee80211_bss_conf {
 	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
-	u64 timestamp;
+	u64 last_tsf;
 	u32 basic_rates;
 	int mcast_rate[IEEE80211_NUM_BANDS];
 	u16 ht_operation_mode;
@@ -1766,20 +1767,6 @@ enum ieee80211_ampdu_mlme_action {
 };
 
 /**
- * enum ieee80211_tx_sync_type - TX sync type
- * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication
- *	(and possibly also before direct probe)
- * @IEEE80211_TX_SYNC_ASSOC: sync TX for association
- * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame
- *	(not implemented yet)
- */
-enum ieee80211_tx_sync_type {
-	IEEE80211_TX_SYNC_AUTH,
-	IEEE80211_TX_SYNC_ASSOC,
-	IEEE80211_TX_SYNC_ACTION,
-};
-
-/**
  * enum ieee80211_frame_release_type - frame release reason
  * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll
  * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to
@@ -1889,26 +1876,6 @@ enum ieee80211_frame_release_type {
  *	of the bss parameters has changed when a call is made. The callback
  *	can sleep.
  *
- * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the
- *	driver should sync with the GO's powersaving so the device doesn't
- *	transmit the frame while the GO is asleep. In the regular AP case
- *	it may be used by drivers for devices implementing other restrictions
- *	on talking to APs, e.g. due to regulatory enforcement or just HW
- *	restrictions.
- *	This function is called for every authentication, association and
- *	action frame separately since applications might attempt to auth
- *	with multiple APs before chosing one to associate to. If it returns
- *	an error, the corresponding authentication, association or frame
- *	transmission is aborted and reported as having failed. It is always
- *	called after tuning to the correct channel.
- *	The callback might be called multiple times before @finish_tx_sync
- *	(but @finish_tx_sync will be called once for each) but in practice
- *	this is unlikely to happen. It can also refuse in that case if the
- *	driver cannot handle that situation.
- *	This callback can sleep.
- * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned
- *	an error. This callback can sleep.
- *
  * @prepare_multicast: Prepare for multicast filter configuration.
  *	This callback is optional, and its return value is passed
  *	to configure_filter(). This callback must be atomic.
@@ -2180,13 +2147,6 @@ struct ieee80211_ops {
 				 struct ieee80211_bss_conf *info,
 				 u32 changed);
 
-	int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-		       const u8 *bssid, enum ieee80211_tx_sync_type type);
-	void (*finish_tx_sync)(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       const u8 *bssid,
-			       enum ieee80211_tx_sync_type type);
-
 	u64 (*prepare_multicast)(struct ieee80211_hw *hw,
 				 struct netdev_hw_addr_list *mc_list);
 	void (*configure_filter)(struct ieee80211_hw *hw,