summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2015-01-15 19:16:56 -0500
committerDavid S. Miller <davem@davemloft.net>2015-01-15 19:16:56 -0500
commit27f097177defdd5858f03500e4b5aa8a97b1627b (patch)
tree186ea28b6f15075df1803acbab7b5a0e9f21cc31 /include
parent615612dc4e583ae5eeb8eb1ece2d3c70be72296d (diff)
parentbaf1b99ba169bdd3324ac9d99bc2a00c25534429 (diff)
Merge tag 'mac80211-next-for-davem-2015-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Here's a big pile of changes for this round. We have * a lot of regulatory code changes to deal with the way newer Intel devices handle this * a change to drop packets while disconnecting from an AP instead of trying to wait for them * a new attempt at improving the tailroom accounting to not kick in too much for performance reasons * improvements in wireless link statistics * many other small improvements and small fixes that didn't seem necessary for 3.19 (e.g. in hwsim which is testing only code) Conflicts: drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c Minor overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include')
-rw-r--r--include/net/cfg80211.h253
-rw-r--r--include/net/mac80211.h55
-rw-r--r--include/net/regulatory.h19
-rw-r--r--include/uapi/linux/nl80211.h176
4 files changed, 356 insertions, 147 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 4ebb816241f..38abc07503f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -520,37 +520,41 @@ ieee80211_chandef_max_power(struct cfg80211_chan_def *chandef)
*
* @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in
* @SURVEY_INFO_IN_USE: channel is currently being used
- * @SURVEY_INFO_CHANNEL_TIME: channel active time (in ms) was filled in
- * @SURVEY_INFO_CHANNEL_TIME_BUSY: channel busy time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: extension channel busy time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_RX: channel receive time was filled in
- * @SURVEY_INFO_CHANNEL_TIME_TX: channel transmit time was filled in
+ * @SURVEY_INFO_TIME: active time (in ms) was filled in
+ * @SURVEY_INFO_TIME_BUSY: busy time was filled in
+ * @SURVEY_INFO_TIME_EXT_BUSY: extension channel busy time was filled in
+ * @SURVEY_INFO_TIME_RX: receive time was filled in
+ * @SURVEY_INFO_TIME_TX: transmit time was filled in
+ * @SURVEY_INFO_TIME_SCAN: scan time was filled in
*
* Used by the driver to indicate which info in &struct survey_info
* it has filled in during the get_survey().
*/
enum survey_info_flags {
- SURVEY_INFO_NOISE_DBM = 1<<0,
- SURVEY_INFO_IN_USE = 1<<1,
- SURVEY_INFO_CHANNEL_TIME = 1<<2,
- SURVEY_INFO_CHANNEL_TIME_BUSY = 1<<3,
- SURVEY_INFO_CHANNEL_TIME_EXT_BUSY = 1<<4,
- SURVEY_INFO_CHANNEL_TIME_RX = 1<<5,
- SURVEY_INFO_CHANNEL_TIME_TX = 1<<6,
+ SURVEY_INFO_NOISE_DBM = BIT(0),
+ SURVEY_INFO_IN_USE = BIT(1),
+ SURVEY_INFO_TIME = BIT(2),
+ SURVEY_INFO_TIME_BUSY = BIT(3),
+ SURVEY_INFO_TIME_EXT_BUSY = BIT(4),
+ SURVEY_INFO_TIME_RX = BIT(5),
+ SURVEY_INFO_TIME_TX = BIT(6),
+ SURVEY_INFO_TIME_SCAN = BIT(7),
};
/**
* struct survey_info - channel survey response
*
- * @channel: the channel this survey record reports, mandatory
+ * @channel: the channel this survey record reports, may be %NULL for a single
+ * record to report global statistics
* @filled: bitflag of flags from &enum survey_info_flags
* @noise: channel noise in dBm. This and all following fields are
* optional
- * @channel_time: amount of time in ms the radio spent on the channel
- * @channel_time_busy: amount of time the primary channel was sensed busy
- * @channel_time_ext_busy: amount of time the extension channel was sensed busy
- * @channel_time_rx: amount of time the radio spent receiving data
- * @channel_time_tx: amount of time the radio spent transmitting data
+ * @time: amount of time in ms the radio was turn on (on the channel)
+ * @time_busy: amount of time the primary channel was sensed busy
+ * @time_ext_busy: amount of time the extension channel was sensed busy
+ * @time_rx: amount of time the radio spent receiving data
+ * @time_tx: amount of time the radio spent transmitting data
+ * @time_scan: amount of time the radio spent for scanning
*
* Used by dump_survey() to report back per-channel survey information.
*
@@ -559,11 +563,12 @@ enum survey_info_flags {
*/
struct survey_info {
struct ieee80211_channel *channel;
- u64 channel_time;
- u64 channel_time_busy;
- u64 channel_time_ext_busy;
- u64 channel_time_rx;
- u64 channel_time_tx;
+ u64 time;
+ u64 time_busy;
+ u64 time_ext_busy;
+ u64 time_rx;
+ u64 time_tx;
+ u64 time_scan;
u32 filled;
s8 noise;
};
@@ -861,75 +866,6 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
enum cfg80211_station_type statype);
/**
- * enum station_info_flags - station information flags
- *
- * Used by the driver to indicate which info in &struct station_info
- * it has filled in during get_station() or dump_station().
- *
- * @STATION_INFO_INACTIVE_TIME: @inactive_time filled
- * @STATION_INFO_RX_BYTES: @rx_bytes filled
- * @STATION_INFO_TX_BYTES: @tx_bytes filled
- * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value
- * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value
- * @STATION_INFO_LLID: @llid filled
- * @STATION_INFO_PLID: @plid filled
- * @STATION_INFO_PLINK_STATE: @plink_state filled
- * @STATION_INFO_SIGNAL: @signal filled
- * @STATION_INFO_TX_BITRATE: @txrate fields are filled
- * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
- * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value
- * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value
- * @STATION_INFO_TX_RETRIES: @tx_retries filled
- * @STATION_INFO_TX_FAILED: @tx_failed filled
- * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
- * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
- * @STATION_INFO_RX_BITRATE: @rxrate fields are filled
- * @STATION_INFO_BSS_PARAM: @bss_param filled
- * @STATION_INFO_CONNECTED_TIME: @connected_time filled
- * @STATION_INFO_ASSOC_REQ_IES: @assoc_req_ies filled
- * @STATION_INFO_STA_FLAGS: @sta_flags filled
- * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled
- * @STATION_INFO_T_OFFSET: @t_offset filled
- * @STATION_INFO_LOCAL_PM: @local_pm filled
- * @STATION_INFO_PEER_PM: @peer_pm filled
- * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
- * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
- * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
- * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
- */
-enum station_info_flags {
- STATION_INFO_INACTIVE_TIME = BIT(0),
- STATION_INFO_RX_BYTES = BIT(1),
- STATION_INFO_TX_BYTES = BIT(2),
- STATION_INFO_LLID = BIT(3),
- STATION_INFO_PLID = BIT(4),
- STATION_INFO_PLINK_STATE = BIT(5),
- STATION_INFO_SIGNAL = BIT(6),
- STATION_INFO_TX_BITRATE = BIT(7),
- STATION_INFO_RX_PACKETS = BIT(8),
- STATION_INFO_TX_PACKETS = BIT(9),
- STATION_INFO_TX_RETRIES = BIT(10),
- STATION_INFO_TX_FAILED = BIT(11),
- STATION_INFO_RX_DROP_MISC = BIT(12),
- STATION_INFO_SIGNAL_AVG = BIT(13),
- STATION_INFO_RX_BITRATE = BIT(14),
- STATION_INFO_BSS_PARAM = BIT(15),
- STATION_INFO_CONNECTED_TIME = BIT(16),
- STATION_INFO_ASSOC_REQ_IES = BIT(17),
- STATION_INFO_STA_FLAGS = BIT(18),
- STATION_INFO_BEACON_LOSS_COUNT = BIT(19),
- STATION_INFO_T_OFFSET = BIT(20),
- STATION_INFO_LOCAL_PM = BIT(21),
- STATION_INFO_PEER_PM = BIT(22),
- STATION_INFO_NONPEER_PM = BIT(23),
- STATION_INFO_RX_BYTES64 = BIT(24),
- STATION_INFO_TX_BYTES64 = BIT(25),
- STATION_INFO_CHAIN_SIGNAL = BIT(26),
- STATION_INFO_CHAIN_SIGNAL_AVG = BIT(27),
- STATION_INFO_EXPECTED_THROUGHPUT = BIT(28),
-};
-
-/**
* enum station_info_rate_flags - bitrate info flags
*
* Used by the driver to indicate the specific rate transmission
@@ -1003,6 +939,24 @@ struct sta_bss_parameters {
u16 beacon_interval;
};
+/**
+ * struct cfg80211_tid_stats - per-TID statistics
+ * @filled: bitmap of flags using the bits of &enum nl80211_tid_stats to
+ * indicate the relevant values in this struct are filled
+ * @rx_msdu: number of received MSDUs
+ * @tx_msdu: number of (attempted) transmitted MSDUs
+ * @tx_msdu_retries: number of retries (not counting the first) for
+ * transmitted MSDUs
+ * @tx_msdu_failed: number of failed transmitted MSDUs
+ */
+struct cfg80211_tid_stats {
+ u32 filled;
+ u64 rx_msdu;
+ u64 tx_msdu;
+ u64 tx_msdu_retries;
+ u64 tx_msdu_failed;
+};
+
#define IEEE80211_MAX_CHAINS 4
/**
@@ -1010,11 +964,12 @@ struct sta_bss_parameters {
*
* Station information filled by driver for get_station() and dump_station.
*
- * @filled: bitflag of flags from &enum station_info_flags
+ * @filled: bitflag of flags using the bits of &enum nl80211_sta_info to
+ * indicate the relevant values in this struct for them
* @connected_time: time(in secs) since a station is last connected
* @inactive_time: time since last station activity (tx/rx) in milliseconds
- * @rx_bytes: bytes received from this station
- * @tx_bytes: bytes transmitted to this station
+ * @rx_bytes: bytes (size of MPDUs) received from this station
+ * @tx_bytes: bytes (size of MPDUs) transmitted to this station
* @llid: mesh local link id
* @plid: mesh peer link id
* @plink_state: mesh peer link state
@@ -1027,10 +982,10 @@ struct sta_bss_parameters {
* @chain_signal_avg: per-chain signal strength average in dBm
* @txrate: current unicast bitrate from this station
* @rxrate: current unicast bitrate to this station
- * @rx_packets: packets received from this station
- * @tx_packets: packets transmitted to this station
- * @tx_retries: cumulative retry counts
- * @tx_failed: number of failed transmissions (retries exceeded, no ACK)
+ * @rx_packets: packets (MSDUs & MMPDUs) received from this station
+ * @tx_packets: packets (MSDUs & MMPDUs) transmitted to this station
+ * @tx_retries: cumulative retry counts (MPDUs)
+ * @tx_failed: number of failed transmissions (MPDUs) (retries exceeded, no ACK)
* @rx_dropped_misc: Dropped for un-specified reason.
* @bss_param: current BSS parameters
* @generation: generation number for nl80211 dumps.
@@ -1050,6 +1005,11 @@ struct sta_bss_parameters {
* @nonpeer_pm: non-peer mesh STA power save mode
* @expected_throughput: expected throughput in kbps (including 802.11 headers)
* towards this station.
+ * @rx_beacon: number of beacons received from this peer
+ * @rx_beacon_signal_avg: signal strength average (in dBm) for beacons received
+ * from this peer
+ * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
+ * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
*/
struct station_info {
u32 filled;
@@ -1090,10 +1050,9 @@ struct station_info {
u32 expected_throughput;
- /*
- * Note: Add a new enum station_info_flags value for each new field and
- * use it to check which fields are initialized.
- */
+ u64 rx_beacon;
+ u8 rx_beacon_signal_avg;
+ struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
};
/**
@@ -1516,6 +1475,9 @@ struct cfg80211_match_set {
* @mac_addr_mask: MAC address mask used with randomisation, bits that
* are 0 in the mask should be randomised, bits that are 1 should
* be taken from the @mac_addr
+ * @rcu_head: RCU callback used to free the struct
+ * @owner_nlportid: netlink portid of owner (if this should is a request
+ * owned by a particular socket)
*/
struct cfg80211_sched_scan_request {
struct cfg80211_ssid *ssids;
@@ -1537,6 +1499,8 @@ struct cfg80211_sched_scan_request {
struct wiphy *wiphy;
struct net_device *dev;
unsigned long scan_start;
+ struct rcu_head rcu_head;
+ u32 owner_nlportid;
/* keep last */
struct ieee80211_channel *channels[0];
@@ -3011,6 +2975,8 @@ struct wiphy_vendor_command {
* @regulatory_flags: wiphy regulatory flags, see
* &enum ieee80211_regulatory_flags
* @features: features advertised to nl80211, see &enum nl80211_feature_flags.
+ * @ext_features: extended features advertised to nl80211, see
+ * &enum nl80211_ext_feature_index.
* @bss_priv_size: each BSS struct has private data allocated with it,
* this variable determines its size
* @max_scan_ssids: maximum number of SSIDs the device can scan for in
@@ -3120,6 +3086,7 @@ struct wiphy {
u16 max_acl_mac_addrs;
u32 flags, regulatory_flags, features;
+ u8 ext_features[DIV_ROUND_UP(NUM_NL80211_EXT_FEATURES, 8)];
u32 ap_sme_capa;
@@ -3808,6 +3775,34 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type,
int regulatory_hint(struct wiphy *wiphy, const char *alpha2);
/**
+ * regulatory_set_wiphy_regd - set regdom info for self managed drivers
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @rd: the regulatory domain informatoin to use for this wiphy
+ *
+ * Set the regulatory domain information for self-managed wiphys, only they
+ * may use this function. See %REGULATORY_WIPHY_SELF_MANAGED for more
+ * information.
+ *
+ * Return: 0 on success. -EINVAL, -EPERM
+ */
+int regulatory_set_wiphy_regd(struct wiphy *wiphy,
+ struct ieee80211_regdomain *rd);
+
+/**
+ * regulatory_set_wiphy_regd_sync_rtnl - set regdom for self-managed drivers
+ * @wiphy: the wireless device we want to process the regulatory domain on
+ * @rd: the regulatory domain information to use for this wiphy
+ *
+ * This functions requires the RTNL to be held and applies the new regdomain
+ * synchronously to this wiphy. For more details see
+ * regulatory_set_wiphy_regd().
+ *
+ * Return: 0 on success. -EINVAL, -EPERM
+ */
+int regulatory_set_wiphy_regd_sync_rtnl(struct wiphy *wiphy,
+ struct ieee80211_regdomain *rd);
+
+/**
* wiphy_apply_custom_regulatory - apply a custom driver regulatory domain
* @wiphy: the wireless device we want to process the regulatory domain on
* @regd: the custom regulatory domain to use for this wiphy
@@ -4565,13 +4560,27 @@ void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr,
struct station_info *sinfo, gfp_t gfp);
/**
+ * cfg80211_del_sta_sinfo - notify userspace about deletion of a station
+ * @dev: the netdev
+ * @mac_addr: the station's address
+ * @sinfo: the station information/statistics
+ * @gfp: allocation flags
+ */
+void cfg80211_del_sta_sinfo(struct net_device *dev, const u8 *mac_addr,
+ struct station_info *sinfo, gfp_t gfp);
+
+/**
* cfg80211_del_sta - notify userspace about deletion of a station
*
* @dev: the netdev
* @mac_addr: the station's address
* @gfp: allocation flags
*/
-void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp);
+static inline void cfg80211_del_sta(struct net_device *dev,
+ const u8 *mac_addr, gfp_t gfp)
+{
+ cfg80211_del_sta_sinfo(dev, mac_addr, NULL, gfp);
+}
/**
* cfg80211_conn_failed - connection request failed notification
@@ -5033,6 +5042,42 @@ void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev,
*/
void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy);
+/**
+ * wiphy_ext_feature_set - set the extended feature flag
+ *
+ * @wiphy: the wiphy to modify.
+ * @ftidx: extended feature bit index.
+ *
+ * The extended features are flagged in multiple bytes (see
+ * &struct wiphy.@ext_features)
+ */
+static inline void wiphy_ext_feature_set(struct wiphy *wiphy,
+ enum nl80211_ext_feature_index ftidx)
+{
+ u8 *ft_byte;
+
+ ft_byte = &wiphy->ext_features[ftidx / 8];
+ *ft_byte |= BIT(ftidx % 8);
+}
+
+/**
+ * wiphy_ext_feature_isset - check the extended feature flag
+ *
+ * @wiphy: the wiphy to modify.
+ * @ftidx: extended feature bit index.
+ *
+ * The extended features are flagged in multiple bytes (see
+ * &struct wiphy.@ext_features)
+ */
+static inline bool
+wiphy_ext_feature_isset(struct wiphy *wiphy,
+ enum nl80211_ext_feature_index ftidx)
+{
+ u8 ft_byte;
+
+ ft_byte = wiphy->ext_features[ftidx / 8];
+ return (ft_byte & BIT(ftidx % 8)) != 0;
+}
/* ethtool helper */
void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 29c7be8808d..123f2308958 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -505,8 +505,11 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
* would be fragmented by size (this is optional, only used for
* monitor injection).
- * @IEEE80211_TX_CTL_PS_RESPONSE: This frame is a response to a poll
- * frame (PS-Poll or uAPSD).
+ * @IEEE80211_TX_STAT_NOACK_TRANSMITTED: A frame that was marked with
+ * IEEE80211_TX_CTL_NO_ACK has been successfully transmitted without
+ * any errors (like issues specific to the driver/HW).
+ * This flag must not be set for frames that don't request no-ack
+ * behaviour with IEEE80211_TX_CTL_NO_ACK.
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -542,7 +545,7 @@ enum mac80211_tx_info_flags {
IEEE80211_TX_STATUS_EOSP = BIT(28),
IEEE80211_TX_CTL_USE_MINRATE = BIT(29),
IEEE80211_TX_CTL_DONTFRAG = BIT(30),
- IEEE80211_TX_CTL_PS_RESPONSE = BIT(31),
+ IEEE80211_TX_STAT_NOACK_TRANSMITTED = BIT(31),
};
#define IEEE80211_TX_CTL_STBC_SHIFT 23
@@ -552,11 +555,14 @@ enum mac80211_tx_info_flags {
*
* @IEEE80211_TX_CTRL_PORT_CTRL_PROTO: this frame is a port control
* protocol frame (e.g. EAP)
+ * @IEEE80211_TX_CTRL_PS_RESPONSE: This frame is a response to a poll
+ * frame (PS-Poll or uAPSD).
*
* These flags are used in tx_info->control.flags.
*/
enum mac80211_tx_control_flags {
IEEE80211_TX_CTRL_PORT_CTRL_PROTO = BIT(0),
+ IEEE80211_TX_CTRL_PS_RESPONSE = BIT(1),
};
/*
@@ -1181,10 +1187,15 @@ struct ieee80211_channel_switch {
* monitoring on this virtual interface -- i.e. it can monitor
* connection quality related parameters, such as the RSSI level and
* provide notifications if configured trigger levels are reached.
+ * @IEEE80211_VIF_SUPPORTS_UAPSD: The device can do U-APSD for this
+ * interface. This flag should be set during interface addition,
+ * but may be set/cleared as late as authentication to an AP. It is
+ * only valid for managed/station mode interfaces.
*/
enum ieee80211_vif_flags {
IEEE80211_VIF_BEACON_FILTER = BIT(0),
IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1),
+ IEEE80211_VIF_SUPPORTS_UAPSD = BIT(2),
};
/**
@@ -1270,7 +1281,8 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
*
* @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
* driver to indicate that it requires IV generation for this
- * particular key.
+ * particular key. Setting this flag does not necessarily mean that SKBs
+ * will have sufficient tailroom for ICV or MIC.
* @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
* the driver for a TKIP key if it requires Michael MIC
* generation in software.
@@ -1282,7 +1294,9 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
* @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
* if space should be prepared for the IV, but the IV
* itself should not be generated. Do not set together with
- * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV on the same key. Setting this flag does
+ * not necessarily mean that SKBs will have sufficient tailroom for ICV or
+ * MIC.
* @IEEE80211_KEY_FLAG_RX_MGMT: This key will be used to decrypt received
* management frames. The flag can help drivers that have a hardware
* crypto implementation that doesn't deal with management frames
@@ -1293,6 +1307,9 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
* @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
* driver for a CCMP key to indicate that is requires IV generation
* only for managment frames (MFP).
+ * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
+ * driver for a key to indicate that sufficient tailroom must always
+ * be reserved for ICV or MIC, even when HW encryption is enabled.
*/
enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0),
@@ -1302,6 +1319,7 @@ enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_SW_MGMT_TX = BIT(4),
IEEE80211_KEY_FLAG_PUT_IV_SPACE = BIT(5),
IEEE80211_KEY_FLAG_RX_MGMT = BIT(6),
+ IEEE80211_KEY_FLAG_RESERVE_TAILROOM = BIT(7),
};
/**
@@ -1580,11 +1598,6 @@ struct ieee80211_tx_control {
* @IEEE80211_HW_MFP_CAPABLE:
* Hardware supports management frame protection (MFP, IEEE 802.11w).
*
- * @IEEE80211_HW_SUPPORTS_UAPSD:
- * Hardware supports Unscheduled Automatic Power Save Delivery
- * (U-APSD) in managed mode. The mode is configured with
- * conf_tx() operation.
- *
* @IEEE80211_HW_REPORTS_TX_ACK_STATUS:
* Hardware can provide ack status reports of Tx frames to
* the stack.
@@ -1670,8 +1683,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_MFP_CAPABLE = 1<<13,
IEEE80211_HW_WANT_MONITOR_VIF = 1<<14,
IEEE80211_HW_NO_AUTO_VIF = 1<<15,
- /* free slot */
- IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
+ /* free slots */
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
IEEE80211_HW_QUEUE_CONTROL = 1<<20,
@@ -2023,7 +2035,7 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* enabled whenever user has enabled powersave.
*
* Driver informs U-APSD client support by enabling
- * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the
+ * %IEEE80211_VIF_SUPPORTS_UAPSD flag. The mode is configured through the
* uapsd parameter in conf_tx() operation. Hardware needs to send the QoS
* Nullfunc frames and stay awake until the service period has ended. To
* utilize U-APSD, dynamic powersave is disabled for voip AC and all frames
@@ -2696,6 +2708,14 @@ enum ieee80211_reconfig_type {
* is only used if the configured rate control algorithm actually uses
* the new rate table API, and is therefore optional. Must be atomic.
*
+ * @sta_statistics: Get statistics for this station. For example with beacon
+ * filtering, the statistics kept by mac80211 might not be accurate, so
+ * let the driver pre-fill the statistics. The driver can fill most of
+ * the values (indicating which by setting the filled bitmap), but not
+ * all of them make sense - see the source for which ones are possible.
+ * Statistics that the driver doesn't fill will be filled by mac80211.
+ * The callback can sleep.
+ *
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
* bursting) for a hardware TX queue.
* Returns a negative error code on failure.
@@ -2856,9 +2876,6 @@ enum ieee80211_reconfig_type {
* @get_et_strings: Ethtool API to get a set of strings to describe stats
* and perhaps other supported types of ethtool data-sets.
*
- * @get_rssi: Get current signal strength in dBm, the function is optional
- * and can sleep.
- *
* @mgd_prepare_tx: Prepare for transmitting a management frame for association
* before associated. In multi-channel scenarios, a virtual interface is
* bound to a channel before it is associated, but as it isn't associated
@@ -3059,6 +3076,10 @@ struct ieee80211_ops {
void (*sta_rate_tbl_update)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta);
+ void (*sta_statistics)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct station_info *sinfo);
int (*conf_tx)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 ac,
const struct ieee80211_tx_queue_params *params);
@@ -3126,8 +3147,6 @@ struct ieee80211_ops {
void (*get_et_strings)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data);
- int (*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta, s8 *rssi_dbm);
void (*mgd_prepare_tx)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index b776d72d84b..ebc5a2ed863 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -147,6 +147,24 @@ struct regulatory_request {
* NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO,
* NL80211_IFTYPE_P2P_DEVICE. The flag will be set by default if a device
* includes any modes unsupported for enforcement checking.
+ * @REGULATORY_WIPHY_SELF_MANAGED: for devices that employ wiphy-specific
+ * regdom management. These devices will ignore all regdom changes not
+ * originating from their own wiphy.
+ * A self-managed wiphys only employs regulatory information obtained from
+ * the FW and driver and does not use other cfg80211 sources like
+ * beacon-hints, country-code IEs and hints from other devices on the same
+ * system. Conversely, a self-managed wiphy does not share its regulatory
+ * hints with other devices in the system. If a system contains several
+ * devices, one or more of which are self-managed, there might be
+ * contradictory regulatory settings between them. Usage of flag is
+ * generally discouraged. Only use it if the FW/driver is incompatible
+ * with non-locally originated hints.
+ * This flag is incompatible with the flags: %REGULATORY_CUSTOM_REG,
+ * %REGULATORY_STRICT_REG, %REGULATORY_COUNTRY_IE_FOLLOW_POWER,
+ * %REGULATORY_COUNTRY_IE_IGNORE and %REGULATORY_DISABLE_BEACON_HINTS.
+ * Mixing any of the above flags with this flag will result in a failure
+ * to register the wiphy. This flag implies
+ * %REGULATORY_DISABLE_BEACON_HINTS and %REGULATORY_COUNTRY_IE_IGNORE.
*/
enum ieee80211_regulatory_flags {
REGULATORY_CUSTOM_REG = BIT(0),
@@ -156,6 +174,7 @@ enum ieee80211_regulatory_flags {
REGULATORY_COUNTRY_IE_IGNORE = BIT(4),
REGULATORY_ENABLE_RELAX_NO_IR = BIT(5),
REGULATORY_IGNORE_STALE_KICKOFF = BIT(6),
+ REGULATORY_WIPHY_SELF_MANAGED = BIT(7),
};
struct ieee80211_freq_range {
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index b37bd5a1cb8..b6c1a00bd8d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -29,6 +29,13 @@
#define NL80211_GENL_NAME "nl80211"
+#define NL80211_MULTICAST_GROUP_CONFIG "config"
+#define NL80211_MULTICAST_GROUP_SCAN "scan"
+#define NL80211_MULTICAST_GROUP_REG "regulatory"
+#define NL80211_MULTICAST_GROUP_MLME "mlme"
+#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
+#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
+
/**
* DOC: Station handling
*
@@ -252,7 +259,18 @@
* %NL80211_ATTR_IFINDEX.
*
* @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
- * regulatory domain.
+ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
+ * has a private regulatory domain, it will be returned. Otherwise, the
+ * global regdomain will be returned.
+ * A device will have a private regulatory domain if it uses the
+ * regulatory_hint() API. Even when a private regdomain is used the channel
+ * information will still be mended according to further hints from
+ * the regulatory core to help with compliance. A dump version of this API
+ * is now available which will returns the global regdomain as well as
+ * all private regdomains of present wiphys (for those that have it).
+ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
+ * its private regdomain is the only valid one for it. The regulatory
+ * core is not used to help with compliance in this case.
* @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
* after being queried by the kernel. CRDA replies by sending a regulatory
* domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
@@ -774,6 +792,10 @@
* peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
* when this command completes.
*
+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
+ * as an event to indicate changes for devices with wiphy-specific regdom
+ * management.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -958,6 +980,8 @@ enum nl80211_commands {
NL80211_CMD_TDLS_CHANNEL_SWITCH,
NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
+ NL80211_CMD_WIPHY_REG_CHANGE,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1655,6 +1679,9 @@ enum nl80211_commands {
* @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
* creation then the new interface will be owned by the netlink socket
* that created it and will be destroyed when the socket is closed.
+ * If set during scheduled scan start then the new scan req will be
+ * owned by the netlink socket that created it and the scheduled scan will
+ * be stopped when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
@@ -1688,6 +1715,26 @@ enum nl80211_commands {
*
* @NL80211_ATTR_MAC_MASK: MAC address mask
*
+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
+ * is self-managing its regulatory information and any regulatory domain
+ * obtained from it is coming from the device's wiphy and not the global
+ * cfg80211 regdomain.
+ *
+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
+ * array. The feature flags are identified by their bit index (see &enum
+ * nl80211_ext_feature_index). The bit index is ordered starting at the
+ * least-significant bit of the first byte in the array, ie. bit index 0
+ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1
+ * of byte 3 (u8 array).
+ *
+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
+ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
+ * may return a survey entry without a channel indicating global radio
+ * statistics (only some values are valid and make sense.)
+ * For devices that don't return such an entry even then, the information
+ * should be contained in the result as the sum of the respective counters
+ * over all channels.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2045,6 +2092,12 @@ enum nl80211_attrs {
NL80211_ATTR_MAC_MASK,
+ NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
+
+ NL80211_ATTR_EXT_FEATURES,
+
+ NL80211_ATTR_SURVEY_RADIO_STATS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2085,7 +2138,7 @@ enum nl80211_attrs {
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_HT_RATES 77
-#define NL80211_MAX_SUPP_REG_RULES 32
+#define NL80211_MAX_SUPP_REG_RULES 64
#define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
#define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
#define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
@@ -2285,18 +2338,24 @@ enum nl80211_sta_bss_param {
*
* @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
+ * (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
+ * (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
+ * (u64, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
* containing info as possible, see &enum nl80211_rate_info
- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
- * station)
- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
+ * (u32, from this station)
+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
+ * (u32, to this station)
+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
+ * (u32, to this station)
* @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
* @NL80211_STA_INFO_LLID: the station's mesh LLID
* @NL80211_STA_INFO_PLID: the station's mesh PLID
@@ -2320,6 +2379,16 @@ enum nl80211_sta_bss_param {
* Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
* @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
* 802.11 header (u32, kbps)
+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
+ * (u64)
+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
+ * for beacons only (u8, dBm)
+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
+ * This is a nested attribute where each the inner attribute number is the
+ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
+ * each one of those is again nested with &enum nl80211_tid_stats
+ * attributes carrying the actual values.
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2352,6 +2421,10 @@ enum nl80211_sta_info {
NL80211_STA_INFO_CHAIN_SIGNAL,
NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
NL80211_STA_INFO_EXPECTED_THROUGHPUT,
+ NL80211_STA_INFO_RX_DROP_MISC,
+ NL80211_STA_INFO_BEACON_RX,
+ NL80211_STA_INFO_BEACON_SIGNAL_AVG,
+ NL80211_STA_INFO_TID_STATS,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2359,6 +2432,31 @@ enum nl80211_sta_info {
};
/**
+ * enum nl80211_tid_stats - per TID statistics attributes
+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
+ * attempted to transmit; u64)
+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
+ * transmitted MSDUs (not counting the first attempt; u64)
+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
+ * MSDUs (u64)
+ * @NUM_NL80211_TID_STATS: number of attributes here
+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
+ */
+enum nl80211_tid_stats {
+ __NL80211_TID_STATS_INVALID,
+ NL80211_TID_STATS_RX_MSDU,
+ NL80211_TID_STATS_TX_MSDU,
+ NL80211_TID_STATS_TX_MSDU_RETRIES,
+ NL80211_TID_STATS_TX_MSDU_FAILED,
+
+ /* keep last */
+ NUM_NL80211_TID_STATS,
+ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
+};
+
+/**
* enum nl80211_mpath_flags - nl80211 mesh path flags
*
* @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
@@ -2772,16 +2870,18 @@ enum nl80211_user_reg_hint_type {
* @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
* @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
* @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
- * spent on this channel
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
+ * was turned on (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
* channel was sensed busy (either due to activity or energy detect)
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
* channel was sensed busy
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
- * receiving data
- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
- * transmitting data
+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
+ * receiving data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
+ * transmitting data (on channel or globally)
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
+ * (on this channel or globally)
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
@@ -2791,17 +2891,25 @@ enum nl80211_survey_info {
NL80211_SURVEY_INFO_FREQUENCY,
NL80211_SURVEY_INFO_NOISE,
NL80211_SURVEY_INFO_IN_USE,
- NL80211_SURVEY_INFO_CHANNEL_TIME,
- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
- NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
- NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+ NL80211_SURVEY_INFO_TIME,
+ NL80211_SURVEY_INFO_TIME_BUSY,
+ NL80211_SURVEY_INFO_TIME_EXT_BUSY,
+ NL80211_SURVEY_INFO_TIME_RX,
+ NL80211_SURVEY_INFO_TIME_TX,
+ NL80211_SURVEY_INFO_TIME_SCAN,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
};
+/* keep old names for compatibility */
+#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
+
/**
* enum nl80211_mntr_flags - monitor configuration flags
*
@@ -3238,6 +3346,9 @@ enum nl80211_bss {
/**
* enum nl80211_bss_status - BSS "status"
* @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
+ * Note that this is no longer used since cfg80211 no longer
+ * keeps track of whether or not authentication was done with
+ * a given BSS.
* @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
* @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
*
@@ -3623,7 +3734,9 @@ struct nl80211_pattern_support {
* same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
* specifies how the scan is performed (e.g. the interval and the
* channels to scan) as well as the scan results that will
- * trigger a wake (i.e. the matchsets).
+ * trigger a wake (i.e. the matchsets). This attribute is also
+ * sent in a response to @NL80211_CMD_GET_WIPHY, indicating the
+ * number of match sets supported by the driver (u32).
* @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
* containing an array with information about what triggered the
* wake up. If no elements are present in the array, it means
@@ -4194,6 +4307,19 @@ enum nl80211_feature_flags {
};
/**
+ * enum nl80211_ext_feature_index - bit index of extended features.
+ *
+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
+ */
+enum nl80211_ext_feature_index {
+
+ /* add new features before the definition below */
+ NUM_NL80211_EXT_FEATURES,
+ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
+};
+
+/**
* enum nl80211_probe_resp_offload_support_attr - optional supported
* protocols for probe-response offloading by the driver/FW.
* To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute.