Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

6 files changed, 137 insertions, 2 deletions

diff --git a/include/linux/average.h b/include/linux/average.h
new file mode 100644
index 00000000000..7706e40f95f
--- /dev/null
+++ b/include/linux/average.h
@@ -0,0 +1,32 @@
+#ifndef _LINUX_AVERAGE_H
+#define _LINUX_AVERAGE_H
+
+#include <linux/kernel.h>
+
+/* Exponentially weighted moving average (EWMA) */
+
+/* For more documentation see lib/average.c */
+
+struct ewma {
+	unsigned long internal;
+	unsigned long factor;
+	unsigned long weight;
+};
+
+extern void ewma_init(struct ewma *avg, unsigned long factor,
+		      unsigned long weight);
+
+extern struct ewma *ewma_add(struct ewma *avg, unsigned long val);
+
+/**
+ * ewma_read() - Get average value
+ * @avg: Average structure
+ *
+ * Returns the average value held in @avg.
+ */
+static inline unsigned long ewma_read(const struct ewma *avg)
+{
+	return DIV_ROUND_CLOSEST(avg->internal, avg->factor);
+}
+
+#endif /* _LINUX_AVERAGE_H */
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index fb877b5621b..d706bf3badc 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -804,6 +804,30 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
  *	means support for per-station GTKs.
  *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for transmitting. If an antenna is not selected in this
+ *	bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ *	Each bit represents one antenna, starting with antenna 1 at the first
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
+ *	drivers can derive which chainmasks to use (if all antennas belonging to
+ *	a particular chain are disabled this chain should be disabled) and if
+ *	a chain has diversity antennas wether diversity should be used or not.
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ *	derived from the available chains after applying the antenna mask.
+ *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
+ *	support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for receiving. If an antenna is not selected in this bitmap
+ *	the hardware should not be configured to receive on this antenna.
+ *	For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -973,6 +997,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SUPPORT_IBSS_RSN,
 
+	NL80211_ATTR_WIPHY_ANTENNA_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+	NL80211_ATTR_MCAST_RATE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -1790,6 +1819,8 @@ enum nl80211_ps_state {
  *	the minimum amount the RSSI level must change after an event before a
  *	new event may be issued (to reduce effects of RSSI oscillation).
  * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ *	consecutive packets were not acknowledged by the peer
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
@@ -1798,6 +1829,7 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_RSSI_THOLD,
 	NL80211_ATTR_CQM_RSSI_HYST,
 	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe93b9c..32bd5694960 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2047,6 +2047,7 @@
 #define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
 #define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
 
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
 #define PCI_VENDOR_ID_BROADCOM		0x14e4
 #define PCI_DEVICE_ID_TIGON3_5752	0x1600
 #define PCI_DEVICE_ID_TIGON3_5752M	0x1601
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 772dea243e5..0663945cfa4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -923,6 +923,7 @@ struct cfg80211_disassoc_request {
  * @privacy: this is a protected network, keys will be configured
  *	after joining
  * @basic_rates: bitmap of basic rates to use when creating the IBSS
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
  */
 struct cfg80211_ibss_params {
 	u8 *ssid;
@@ -934,6 +935,7 @@ struct cfg80211_ibss_params {
 	u32 basic_rates;
 	bool channel_fixed;
 	bool privacy;
+	int mcast_rate[IEEE80211_NUM_BANDS];
 };
 
 /**
@@ -1304,6 +1306,9 @@ struct cfg80211_ops {
 	void	(*mgmt_frame_register)(struct wiphy *wiphy,
 				       struct net_device *dev,
 				       u16 frame_type, bool reg);
+
+	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
+	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
 };
 
 /*
@@ -2596,6 +2601,18 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
 			      enum nl80211_cqm_rssi_threshold_event rssi_event,
 			      gfp_t gfp);
 
+/**
+ * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
+ * @dev: network device
+ * @peer: peer's MAC address
+ * @num_packets: how many packets were lost -- should be a fixed threshold
+ *	but probably no less than maybe 50, or maybe a throughput dependent
+ *	threshold (to account for temporary interference)
+ * @gfp: context flags
+ */
+void cfg80211_cqm_pktloss_notify(struct net_device *dev,
+				 const u8 *peer, u32 num_packets, gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9fdf982d128..eaa4affd40c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -97,6 +97,20 @@ enum ieee80211_max_queues {
 };
 
 /**
+ * enum ieee80211_ac_numbers - AC numbers as used in mac80211
+ * @IEEE80211_AC_VO: voice
+ * @IEEE80211_AC_VI: video
+ * @IEEE80211_AC_BE: best effort
+ * @IEEE80211_AC_BK: background
+ */
+enum ieee80211_ac_numbers {
+	IEEE80211_AC_VO		= 0,
+	IEEE80211_AC_VI		= 1,
+	IEEE80211_AC_BE		= 2,
+	IEEE80211_AC_BK		= 3,
+};
+
+/**
  * struct ieee80211_tx_queue_params - transmit queue configuration
  *
  * The information provided in this structure is required for QoS
@@ -205,6 +219,7 @@ enum ieee80211_bss_change {
  * @basic_rates: bitmap of basic rates, each bit stands for an
  *	index into the rate table configured by the driver in
  *	the current band.
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
  * @bssid: The BSSID for this BSS
  * @enable_beacon: whether beaconing should be enabled or not
  * @channel_type: Channel type for this BSS -- the hardware might be
@@ -244,6 +259,7 @@ struct ieee80211_bss_conf {
 	u16 assoc_capability;
 	u64 timestamp;
 	u32 basic_rates;
+	int mcast_rate[IEEE80211_NUM_BANDS];
 	u16 ht_operation_mode;
 	s32 cqm_rssi_thold;
 	u32 cqm_rssi_hyst;
@@ -1652,6 +1668,11 @@ enum ieee80211_ampdu_mlme_action {
  *	and IV16) for the given key from hardware.
  *	The callback must be atomic.
  *
+ * @set_frag_threshold: Configuration of fragmentation threshold. Assign this
+ *	if the device does fragmentation by itself; if this callback is
+ *	implemented then the stack will not do fragmentation.
+ *	The callback can sleep.
+ *
  * @set_rts_threshold: Configuration of RTS threshold (if device needs it)
  *	The callback can sleep.
  *
@@ -1724,6 +1745,13 @@ enum ieee80211_ampdu_mlme_action {
  *	completion of the channel switch.
  *
  * @napi_poll: Poll Rx queue for incoming data frames.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1765,6 +1793,7 @@ struct ieee80211_ops {
 			 struct ieee80211_low_level_stats *stats);
 	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
 			     u32 *iv32, u16 *iv16);
+	int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
 	int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
 	int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       struct ieee80211_sta *sta);
@@ -1793,6 +1822,8 @@ struct ieee80211_ops {
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
 	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
+	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
+	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
 };
 
 /**
@@ -2501,6 +2532,21 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
 			       struct ieee80211_sta *pubsta, bool block);
 
 /**
+ * ieee80211_ap_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware. The template is filled with bssid, ssid and supported rate
+ * information. This function must only be called from within the
+ * .bss_info_changed callback function and only in managed mode. The function
+ * is only useful when the interface is associated, otherwise it will return
+ * NULL.
+ */
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif);
+
+/**
  * ieee80211_beacon_loss - inform hardware does not receive beacons
  *
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
@@ -2640,7 +2686,7 @@ enum rate_control_changed {
  * @rate_idx_mask: user-requested rate mask (not MCS for now)
  * @skb: the skb that will be transmitted, the control information in it needs
  *	to be filled in
- * @ap: whether this frame is sent out in AP mode
+ * @bss: whether this frame is sent out in AP or IBSS mode
  */
 struct ieee80211_tx_rate_control {
 	struct ieee80211_hw *hw;
@@ -2651,7 +2697,7 @@ struct ieee80211_tx_rate_control {
 	bool rts, short_preamble;
 	u8 max_rate_idx;
 	u32 rate_idx_mask;
-	bool ap;
+	bool bss;
 };
 
 struct rate_control_ops {
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index 9e103a4e91e..356d6e3dc20 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -43,6 +43,12 @@ enum environment_cap {
  * @intersect: indicates whether the wireless core should intersect
  * 	the requested regulatory domain with the presently set regulatory
  * 	domain.
+ * @processed: indicates whether or not this requests has already been
+ *	processed. When the last request is processed it means that the
+ *	currently regulatory domain set on cfg80211 is updated from
+ *	CRDA and can be used by other regulatory requests. When a
+ *	the last request is not yet processed we must yield until it
+ *	is processed before processing any new requests.
  * @country_ie_checksum: checksum of the last processed and accepted
  * 	country IE
  * @country_ie_env: lets us know if the AP is telling us we are outdoor,
@@ -54,6 +60,7 @@ struct regulatory_request {
 	enum nl80211_reg_initiator initiator;
 	char alpha2[2];
 	bool intersect;
+	bool processed;
 	enum environment_cap country_ie_env;
 	struct list_head list;
 };