Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input layer updates from Dmitry Torokhov:
 "First set of updates for the input subsystem.  You will get a new
  touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx
  SoC, large update to Atmel mXT touchscreen driver, a lot of drivers
  acquired device tree support and a slew of other fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: add MELFAS mms114 touchscreen driver
  Input: add support for key scan interface of the LPC32xx SoC
  Input: omap4-keypad - add device tree support
  Input: hanwang - add support for Art Master II tablet
  Input: spear_keyboard - reconfigure operating frequency on suspend
  Input: spear_keyboard - fix clock handling during suspend/resume
  Input: ff-memless - fix a couple min_t() casts
  Input: synaptics - print firmware ID and board number at init
  Input: spear_keyboard - generalize keyboard frequency configuration
  Input: spear_keyboard - rename bit definitions to reflect register
  Input: spear_keyboard - use correct io accessors
  Input: spear-keyboard - fix disable device_init_wakeup in remove
  Input: wacom_i2c - fix compiler warning
  Input: imx_keypad - check error returned by clk_prepare_enable()
  Input: imx_keypad - adapt the new kpp clock name
  Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()
  Input: ad7879 - add option to correct xy axis
  Input: synaptics_usb - Remove TrackPoint name trailing whitespace
  Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"
  Input: MT - Include win8 support
  ...

3 files changed, 31 insertions, 3 deletions

diff --git a/include/linux/i2c/mms114.h b/include/linux/i2c/mms114.h
new file mode 100644
index 00000000000..5722ebfb273
--- /dev/null
+++ b/include/linux/i2c/mms114.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#ifndef __LINUX_MMS114_H
+#define __LINUX_MMS114_H
+
+struct mms114_platform_data {
+	unsigned int x_size;
+	unsigned int y_size;
+	unsigned int contact_threshold;
+	unsigned int moving_threshold;
+	bool x_invert;
+	bool y_invert;
+
+	void (*cfg_pin)(bool);
+};
+
+#endif	/* __LINUX_MMS114_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index 2740d080ec6..725dcd0f63a 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -807,18 +807,20 @@ struct input_keymap_entry {
 #define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
 #define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
 #define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X ellipse position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y ellipse position */
+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
 #define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
 #define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
 
 #ifdef __KERNEL__
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST		ABS_MT_DISTANCE
+#define ABS_MT_LAST		ABS_MT_TOOL_Y
 #endif
 
 #define ABS_MAX			0x3f
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
index 6334cee1a3b..58368be0b4c 100644
--- a/include/linux/spi/ad7879.h
+++ b/include/linux/spi/ad7879.h
@@ -12,6 +12,8 @@ struct ad7879_platform_data {
 	u16	y_min, y_max;
 	u16	pressure_min, pressure_max;
 
+	bool	swap_xy;		/* swap x and y axes */
+
 	/* [0..255] 0=OFF Starts at 1=550us and goes
 	 * all the way to 9.440ms in steps of 35us.
 	 */