Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: (25 commits)
  avr32: Add hardware power-down function call
  avr32: add include/asm-avr32/serial.h
  avr32: don't offer PARPORT_PC
  avr32: don't offer CONFIG_GEN_RTC
  avr32: don't offer CONFIG_RTC
  add include/asm-avr32/xor.h
  avr32: Remove two unused #defines from mm/init.c
  avr32: Implement set_rate(), set_parent() and mode() for pll1
  avr32: Generic clockevents support
  avr32: Move sleep code into mach-at32ap
  avr32: Use constants from sysreg.h in asm.h
  avr32: Delete mostly unused header asm/intc.h
  avr32: start clocksource cleanup
  avr32: pass i2c board info through at32_add_device_twi
  avr32: cleanup - use _AC macro to define PAGE_SIZE
  Generate raw keyboard codes for AVR32 architecture
  atmel_usba_udc: Add support for AT91CAP9 UDPHS
  atmel_usba_udc: Add missing kfree() in usba_udc_remove()
  atmel_usba_udc: move endpoint declarations into platform data.
  atmel_usba_udc: Kill GPIO_PIN_NONE
  ...

11 files changed, 358 insertions, 253 deletions

diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
index 7597b0bd2f0..a4e2d28bfb5 100644
--- a/include/asm-avr32/arch-at32ap/board.h
+++ b/include/asm-avr32/arch-at32ap/board.h
@@ -38,9 +38,7 @@ struct platform_device *
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len);
 
-struct usba_platform_data {
-	int vbus_pin;
-};
+struct usba_platform_data;
 struct platform_device *
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
 
@@ -68,7 +66,10 @@ struct platform_device *at32_add_device_pwm(u32 mask);
 struct platform_device *
 at32_add_device_ssc(unsigned int id, unsigned int flags);
 
-struct platform_device *at32_add_device_twi(unsigned int id);
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+					    struct i2c_board_info *b,
+					    unsigned int n);
 struct platform_device *at32_add_device_mci(unsigned int id);
 struct platform_device *at32_add_device_ac97c(unsigned int id);
 struct platform_device *at32_add_device_abdac(unsigned int id);
diff --git a/include/asm-avr32/arch-at32ap/pm.h b/include/asm-avr32/arch-at32ap/pm.h
new file mode 100644
index 00000000000..356e4306490
--- /dev/null
+++ b/include/asm-avr32/arch-at32ap/pm.h
@@ -0,0 +1,48 @@
+/*
+ * AVR32 AP Power Management.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_PM_H
+#define __ASM_AVR32_ARCH_PM_H
+
+/* Possible arguments to the "sleep" instruction */
+#define CPU_SLEEP_IDLE		0
+#define CPU_SLEEP_FROZEN	1
+#define CPU_SLEEP_STANDBY	2
+#define CPU_SLEEP_STOP		3
+#define CPU_SLEEP_STATIC	5
+
+#ifndef __ASSEMBLY__
+extern void cpu_enter_idle(void);
+
+extern bool disable_idle_sleep;
+
+static inline void cpu_disable_idle_sleep(void)
+{
+	disable_idle_sleep = true;
+}
+
+static inline void cpu_enable_idle_sleep(void)
+{
+	disable_idle_sleep = false;
+}
+
+static inline void cpu_idle_sleep(void)
+{
+	/*
+	 * If we're using the COUNT and COMPARE registers for
+	 * timekeeping, we can't use the IDLE state.
+	 */
+	if (disable_idle_sleep)
+		cpu_relax();
+	else
+		cpu_enter_idle();
+}
+#endif
+
+#endif /* __ASM_AVR32_ARCH_PM_H */
diff --git a/include/asm-avr32/arch-at32ap/time.h b/include/asm-avr32/arch-at32ap/time.h
deleted file mode 100644
index cc8a43418a4..00000000000
--- a/include/asm-avr32/arch-at32ap/time.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
-#define _ASM_AVR32_ARCH_AT32AP_TIME_H
-
-#include <linux/platform_device.h>
-
-extern struct irqaction timer_irqaction;
-extern struct platform_device at32_systc0_device;
-extern void local_timer_interrupt(int irq, void *dev_id);
-
-#define TIMER_BCR					0x000000c0
-#define TIMER_BCR_SYNC						 0
-#define TIMER_BMR					0x000000c4
-#define TIMER_BMR_TC0XC0S					 0
-#define TIMER_BMR_TC1XC1S					 2
-#define TIMER_BMR_TC2XC2S					 4
-#define TIMER_CCR					0x00000000
-#define TIMER_CCR_CLKDIS					 1
-#define TIMER_CCR_CLKEN						 0
-#define TIMER_CCR_SWTRG						 2
-#define TIMER_CMR					0x00000004
-#define TIMER_CMR_ABETRG					10
-#define TIMER_CMR_ACPA						16
-#define TIMER_CMR_ACPC						18
-#define TIMER_CMR_AEEVT						20
-#define TIMER_CMR_ASWTRG					22
-#define TIMER_CMR_BCPB						24
-#define TIMER_CMR_BCPC						26
-#define TIMER_CMR_BEEVT						28
-#define TIMER_CMR_BSWTRG					30
-#define TIMER_CMR_BURST						 4
-#define TIMER_CMR_CLKI						 3
-#define TIMER_CMR_CPCDIS					 7
-#define TIMER_CMR_CPCSTOP					 6
-#define TIMER_CMR_CPCTRG					14
-#define TIMER_CMR_EEVT						10
-#define TIMER_CMR_EEVTEDG					 8
-#define TIMER_CMR_ENETRG					12
-#define TIMER_CMR_ETRGEDG					 8
-#define TIMER_CMR_LDBDIS					 7
-#define TIMER_CMR_LDBSTOP					 6
-#define TIMER_CMR_LDRA						16
-#define TIMER_CMR_LDRB						18
-#define TIMER_CMR_TCCLKS					 0
-#define TIMER_CMR_WAVE						15
-#define TIMER_CMR_WAVSEL					13
-#define TIMER_CV					0x00000010
-#define TIMER_CV_CV						 0
-#define TIMER_IDR					0x00000028
-#define TIMER_IDR_COVFS						 0
-#define TIMER_IDR_CPAS						 2
-#define TIMER_IDR_CPBS						 3
-#define TIMER_IDR_CPCS						 4
-#define TIMER_IDR_ETRGS						 7
-#define TIMER_IDR_LDRAS						 5
-#define TIMER_IDR_LDRBS						 6
-#define TIMER_IDR_LOVRS						 1
-#define TIMER_IER					0x00000024
-#define TIMER_IER_COVFS						 0
-#define TIMER_IER_CPAS						 2
-#define TIMER_IER_CPBS						 3
-#define TIMER_IER_CPCS						 4
-#define TIMER_IER_ETRGS						 7
-#define TIMER_IER_LDRAS						 5
-#define TIMER_IER_LDRBS						 6
-#define TIMER_IER_LOVRS						 1
-#define TIMER_IMR					0x0000002c
-#define TIMER_IMR_COVFS						 0
-#define TIMER_IMR_CPAS						 2
-#define TIMER_IMR_CPBS						 3
-#define TIMER_IMR_CPCS						 4
-#define TIMER_IMR_ETRGS						 7
-#define TIMER_IMR_LDRAS						 5
-#define TIMER_IMR_LDRBS						 6
-#define TIMER_IMR_LOVRS						 1
-#define TIMER_RA					0x00000014
-#define TIMER_RA_RA						 0
-#define TIMER_RB					0x00000018
-#define TIMER_RB_RB						 0
-#define TIMER_RC					0x0000001c
-#define TIMER_RC_RC						 0
-#define TIMER_SR					0x00000020
-#define TIMER_SR_CLKSTA						16
-#define TIMER_SR_COVFS						 0
-#define TIMER_SR_CPAS						 2
-#define TIMER_SR_CPBS						 3
-#define TIMER_SR_CPCS						 4
-#define TIMER_SR_ETRGS						 7
-#define TIMER_SR_LDRAS						 5
-#define TIMER_SR_LDRBS						 6
-#define TIMER_SR_LOVRS						 1
-#define TIMER_SR_MTIOA						17
-#define TIMER_SR_MTIOB						18
-
-/* Bit manipulation macros */
-#define TIMER_BIT(name)		(1 << TIMER_##name)
-#define TIMER_BF(name,value)	((value) << TIMER_##name)
-
-/* Register access macros */
-#define timer_read(port,instance,reg) \
-	__raw_readl(port + (0x40 * instance) + TIMER_##reg)
-#define timer_write(port,instance,reg,value) \
-	__raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
-
-#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
diff --git a/include/asm-avr32/asm.h b/include/asm-avr32/asm.h
index 515c7618952..a2c64f404b9 100644
--- a/include/asm-avr32/asm.h
+++ b/include/asm-avr32/asm.h
@@ -12,10 +12,10 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
-#define mask_interrupts		ssrf	SR_GM_BIT
-#define mask_exceptions		ssrf	SR_EM_BIT
-#define unmask_interrupts	csrf	SR_GM_BIT
-#define unmask_exceptions	csrf	SR_EM_BIT
+#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
+#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
+#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
+#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
 
 #ifdef CONFIG_FRAME_POINTER
 	.macro	save_fp
diff --git a/include/asm-avr32/intc.h b/include/asm-avr32/intc.h
deleted file mode 100644
index 1ac9ca75e8f..00000000000
--- a/include/asm-avr32/intc.h
+++ /dev/null
@@ -1,128 +0,0 @@
-#ifndef __ASM_AVR32_INTC_H
-#define __ASM_AVR32_INTC_H
-
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-
-struct irq_controller;
-struct irqaction;
-struct pt_regs;
-
-struct platform_device;
-
-/* Information about the internal interrupt controller */
-struct intc_device {
-	/* ioremapped address of configuration block */
-	void __iomem *regs;
-
-	/* the physical device */
-	struct platform_device *pdev;
-
-	/* Number of interrupt lines per group. */
-	unsigned int irqs_per_group;
-
-	/* The highest group ID + 1 */
-	unsigned int nr_groups;
-
-	/*
-	 * Bitfield indicating which groups are actually in use.  The
-	 * size of the array is
-	 * ceil(group_max / (8 * sizeof(unsigned int))).
-	 */
-	unsigned int group_mask[];
-};
-
-struct irq_controller_class {
-	/*
-	 * A short name identifying this kind of controller.
-	 */
-	const char *typename;
-	/*
-	 * Handle the IRQ.  Must do any necessary acking and masking.
-	 */
-	irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
-	/*
-	 * Register a new IRQ handler.
-	 */
-	int (*setup)(struct irq_controller *ctrl, unsigned int irq,
-		     struct irqaction *action);
-	/*
-	 * Unregister a IRQ handler.
-	 */
-	void (*free)(struct irq_controller *ctrl, unsigned int irq,
-		     void *dev_id);
-	/*
-	 * Mask the IRQ in the interrupt controller.
-	 */
-	void (*mask)(struct irq_controller *ctrl, unsigned int irq);
-	/*
-	 * Unmask the IRQ in the interrupt controller.
-	 */
-	void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
-	/*
-	 * Set the type of the IRQ. See below for possible types.
-	 * Return -EINVAL if a given type is not supported
-	 */
-	int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
-			unsigned int type);
-	/*
-	 * Return the IRQ type currently set
-	 */
-	unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
-};
-
-struct irq_controller {
-	struct irq_controller_class *class;
-	unsigned int irq_group;
-	unsigned int first_irq;
-	unsigned int nr_irqs;
-	struct list_head list;
-};
-
-struct intc_group_desc {
-	struct irq_controller *ctrl;
-	irqreturn_t (*handle)(int, void *, struct pt_regs *);
-	unsigned long flags;
-	void *dev_id;
-	const char *devname;
-};
-
-/*
- * The internal interrupt controller.  Defined in board/part-specific
- * devices.c.
- * TODO: Should probably be defined per-cpu.
- */
-extern struct intc_device intc;
-
-extern int request_internal_irq(unsigned int irq,
-				irqreturn_t (*handler)(int, void *, struct pt_regs *),
-				unsigned long irqflags,
-				const char *devname, void *dev_id);
-extern void free_internal_irq(unsigned int irq);
-
-/* Only used by time_init() */
-extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
-
-/*
- * Set interrupt priority for a given group. `group' can be found by
- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
- * (highest). Higher-priority interrupts will preempt lower-priority
- * interrupts (unless interrupts are masked globally).
- *
- * This function does not check for conflicts within a group.
- */
-extern int intc_set_priority(unsigned int group,
-			     unsigned int priority);
-
-/*
- * Returns a bitmask of pending interrupts in a group.
- */
-extern unsigned long intc_get_pending(unsigned int group);
-
-/*
- * Register a new external interrupt controller.  Returns the first
- * external IRQ number that is assigned to the new controller.
- */
-extern int intc_register_controller(struct irq_controller *ctrl);
-
-#endif /* __ASM_AVR32_INTC_H */
diff --git a/include/asm-avr32/irq.h b/include/asm-avr32/irq.h
index 9315724c059..c563b7720c1 100644
--- a/include/asm-avr32/irq.h
+++ b/include/asm-avr32/irq.h
@@ -14,6 +14,11 @@
 #ifndef __ASSEMBLER__
 int nmi_enable(void);
 void nmi_disable(void);
+
+/*
+ * Returns a bitmask of pending interrupts in a group.
+ */
+extern unsigned long intc_get_pending(unsigned int group);
 #endif
 
 #endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h
index 5582968feee..cbbc5ca9728 100644
--- a/include/asm-avr32/page.h
+++ b/include/asm-avr32/page.h
@@ -8,13 +8,11 @@
 #ifndef __ASM_AVR32_PAGE_H
 #define __ASM_AVR32_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	12
-#ifdef __ASSEMBLY__
-#define PAGE_SIZE	(1 << PAGE_SHIFT)
-#else
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#endif
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 #define PTE_MASK	PAGE_MASK
 
diff --git a/include/asm-avr32/serial.h b/include/asm-avr32/serial.h
new file mode 100644
index 00000000000..5ecaebc22b0
--- /dev/null
+++ b/include/asm-avr32/serial.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/include/asm-avr32/xor.h b/include/asm-avr32/xor.h
new file mode 100644
index 00000000000..99c87aa0af4
--- /dev/null
+++ b/include/asm-avr32/xor.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_XOR_H
+#define _ASM_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif
diff --git a/include/linux/atmel_tc.h b/include/linux/atmel_tc.h
new file mode 100644
index 00000000000..53ba65e30ca
--- /dev/null
+++ b/include/linux/atmel_tc.h
@@ -0,0 +1,252 @@
+/*
+ * Timer/Counter Unit (TC) registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_TC_H
+#define ATMEL_TC_H
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+
+/*
+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
+ * three general-purpose 16-bit timers.  These timers share one register bank.
+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
+ * may be shared by the whole TC block.
+ *
+ * These TC blocks may have up to nine external pins:  TCLK0..2 signals for
+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
+ * or triggering.  Those pins need to be set up for use with the TC block,
+ * else they will be used as GPIOs or for a different controller.
+ *
+ * Although we expect each TC block to have a platform_device node, those
+ * nodes are not what drivers bind to.  Instead, they ask for a specific
+ * TC block, by number ... which is a common approach on systems with many
+ * timers.  Then they use clk_get() and platform_get_irq() to get clock and
+ * IRQ resources.
+ */
+
+struct clk;
+
+/**
+ * struct atmel_tc - information about a Timer/Counter Block
+ * @pdev: physical device
+ * @iomem: resource associated with the I/O register
+ * @regs: mapping through which the I/O registers can be accessed
+ * @irq: irq for each of the three channels
+ * @clk: internal clock source for each of the three channels
+ * @node: list node, for tclib internal use
+ *
+ * On some platforms, each TC channel has its own clocks and IRQs,
+ * while on others, all TC channels share the same clock and IRQ.
+ * Drivers should clk_enable() all the clocks they need even though
+ * all the entries in @clk may point to the same physical clock.
+ * Likewise, drivers should request irqs independently for each
+ * channel, but they must use IRQF_SHARED in case some of the entries
+ * in @irq are actually the same IRQ.
+ */
+struct atmel_tc {
+	struct platform_device	*pdev;
+	struct resource		*iomem;
+	void __iomem		*regs;
+	int			irq[3];
+	struct clk		*clk[3];
+	struct list_head	node;
+};
+
+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
+extern void atmel_tc_free(struct atmel_tc *tc);
+
+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
+extern const u8 atmel_tc_divisors[5];
+
+
+/*
+ * Two registers have block-wide controls.  These are: configuring the three
+ * "external" clocks (or event sources) used by the timer channels; and
+ * synchronizing the timers by resetting them all at once.
+ *
+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
+ * signals.  Or, it can mean "external to timer", using the TIOA output from
+ * one of the other two timers that's being run in waveform mode.
+ */
+
+#define ATMEL_TC_BCR	0xc0		/* TC Block Control Register */
+#define     ATMEL_TC_SYNC	(1 << 0)	/* synchronize timers */
+
+#define ATMEL_TC_BMR	0xc4		/* TC Block Mode Register */
+#define     ATMEL_TC_TC0XC0S	(3 << 0)	/* external clock 0 source */
+#define        ATMEL_TC_TC0XC0S_TCLK0	(0 << 0)
+#define        ATMEL_TC_TC0XC0S_NONE	(1 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA1	(2 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA2	(3 << 0)
+#define     ATMEL_TC_TC1XC1S	(3 << 2)	/* external clock 1 source */
+#define        ATMEL_TC_TC1XC1S_TCLK1	(0 << 2)
+#define        ATMEL_TC_TC1XC1S_NONE	(1 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA0	(2 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA2	(3 << 2)
+#define     ATMEL_TC_TC2XC2S	(3 << 4)	/* external clock 2 source */
+#define        ATMEL_TC_TC2XC2S_TCLK2	(0 << 4)
+#define        ATMEL_TC_TC2XC2S_NONE	(1 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA0	(2 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA1	(3 << 4)
+
+
+/*
+ * Each TC block has three "channels", each with one counter and controls.
+ *
+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
+ * when it's not "external") is silicon-specific.  AT91 platforms use one
+ * set of definitions; AVR32 platforms use a different set.  Don't hard-wire
+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
+ * where index N is the divisor for clock N+1, else zero to indicate it uses
+ * the 32 KiHz clock.
+ *
+ * The timers can be chained in various ways, and operated in "waveform"
+ * generation mode (including PWM) or "capture" mode (to time events).  In
+ * both modes, behavior can be configured in many ways.
+ *
+ * Each timer has two I/O pins, TIOA and TIOB.  Waveform mode uses TIOA as a
+ * PWM output, and TIOB as either another PWM or as a trigger.  Capture mode
+ * uses them only as inputs.
+ */
+#define ATMEL_TC_CHAN(idx)	((idx)*0x40)
+#define ATMEL_TC_REG(idx, reg)	(ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
+
+#define ATMEL_TC_CCR	0x00		/* Channel Control Register */
+#define     ATMEL_TC_CLKEN	(1 << 0)	/* clock enable */
+#define     ATMEL_TC_CLKDIS	(1 << 1)	/* clock disable */
+#define     ATMEL_TC_SWTRG	(1 << 2)	/* software trigger */
+
+#define ATMEL_TC_CMR	0x04		/* Channel Mode Register */
+
+/* Both modes share some CMR bits */
+#define     ATMEL_TC_TCCLKS	(7 << 0)	/* clock source */
+#define        ATMEL_TC_TIMER_CLOCK1	(0 << 0)
+#define        ATMEL_TC_TIMER_CLOCK2	(1 << 0)
+#define        ATMEL_TC_TIMER_CLOCK3	(2 << 0)
+#define        ATMEL_TC_TIMER_CLOCK4	(3 << 0)
+#define        ATMEL_TC_TIMER_CLOCK5	(4 << 0)
+#define        ATMEL_TC_XC0		(5 << 0)
+#define        ATMEL_TC_XC1		(6 << 0)
+#define        ATMEL_TC_XC2		(7 << 0)
+#define     ATMEL_TC_CLKI	(1 << 3)	/* clock invert */
+#define     ATMEL_TC_BURST	(3 << 4)	/* clock gating */
+#define        ATMEL_TC_GATE_NONE	(0 << 4)
+#define        ATMEL_TC_GATE_XC0	(1 << 4)
+#define        ATMEL_TC_GATE_XC1	(2 << 4)
+#define        ATMEL_TC_GATE_XC2	(3 << 4)
+#define     ATMEL_TC_WAVE	(1 << 15)	/* true = Waveform mode */
+
+/* CAPTURE mode CMR bits */
+#define     ATMEL_TC_LDBSTOP	(1 << 6)	/* counter stops on RB load */
+#define     ATMEL_TC_LDBDIS	(1 << 7)	/* counter disable on RB load */
+#define     ATMEL_TC_ETRGEDG	(3 << 8)	/* external trigger edge */
+#define        ATMEL_TC_ETRGEDG_NONE	(0 << 8)
+#define        ATMEL_TC_ETRGEDG_RISING	(1 << 8)
+#define        ATMEL_TC_ETRGEDG_FALLING	(2 << 8)
+#define        ATMEL_TC_ETRGEDG_BOTH	(3 << 8)
+#define     ATMEL_TC_ABETRG	(1 << 10)	/* external trigger is TIOA? */
+#define     ATMEL_TC_CPCTRG	(1 << 14)	/* RC compare trigger enable */
+#define     ATMEL_TC_LDRA	(3 << 16)	/* RA loading edge (of TIOA) */
+#define        ATMEL_TC_LDRA_NONE	(0 << 16)
+#define        ATMEL_TC_LDRA_RISING	(1 << 16)
+#define        ATMEL_TC_LDRA_FALLING	(2 << 16)
+#define        ATMEL_TC_LDRA_BOTH	(3 << 16)
+#define     ATMEL_TC_LDRB	(3 << 18)	/* RB loading edge (of TIOA) */
+#define        ATMEL_TC_LDRB_NONE	(0 << 18)
+#define        ATMEL_TC_LDRB_RISING	(1 << 18)
+#define        ATMEL_TC_LDRB_FALLING	(2 << 18)
+#define        ATMEL_TC_LDRB_BOTH	(3 << 18)
+
+/* WAVEFORM mode CMR bits */
+#define     ATMEL_TC_CPCSTOP	(1 <<  6)	/* RC compare stops counter */
+#define     ATMEL_TC_CPCDIS	(1 <<  7)	/* RC compare disables counter */
+#define     ATMEL_TC_EEVTEDG	(3 <<  8)	/* external event edge */
+#define        ATMEL_TC_EEVTEDG_NONE	(0 << 8)
+#define        ATMEL_TC_EEVTEDG_RISING	(1 << 8)
+#define        ATMEL_TC_EEVTEDG_FALLING	(2 << 8)
+#define        ATMEL_TC_EEVTEDG_BOTH	(3 << 8)
+#define     ATMEL_TC_EEVT	(3 << 10)	/* external event source */
+#define        ATMEL_TC_EEVT_TIOB	(0 << 10)
+#define        ATMEL_TC_EEVT_XC0	(1 << 10)
+#define        ATMEL_TC_EEVT_XC1	(2 << 10)
+#define        ATMEL_TC_EEVT_XC2	(3 << 10)
+#define     ATMEL_TC_ENETRG	(1 << 12)	/* external event is trigger */
+#define     ATMEL_TC_WAVESEL	(3 << 13)	/* waveform type */
+#define        ATMEL_TC_WAVESEL_UP	(0 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN	(1 << 13)
+#define        ATMEL_TC_WAVESEL_UP_AUTO	(2 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
+#define     ATMEL_TC_ACPA	(3 << 16)	/* RA compare changes TIOA */
+#define        ATMEL_TC_ACPA_NONE	(0 << 16)
+#define        ATMEL_TC_ACPA_SET	(1 << 16)
+#define        ATMEL_TC_ACPA_CLEAR	(2 << 16)
+#define        ATMEL_TC_ACPA_TOGGLE	(3 << 16)
+#define     ATMEL_TC_ACPC	(3 << 18)	/* RC compare changes TIOA */
+#define        ATMEL_TC_ACPC_NONE	(0 << 18)
+#define        ATMEL_TC_ACPC_SET	(1 << 18)
+#define        ATMEL_TC_ACPC_CLEAR	(2 << 18)
+#define        ATMEL_TC_ACPC_TOGGLE	(3 << 18)
+#define     ATMEL_TC_AEEVT	(3 << 20)	/* external event changes TIOA */
+#define        ATMEL_TC_AEEVT_NONE	(0 << 20)
+#define        ATMEL_TC_AEEVT_SET	(1 << 20)
+#define        ATMEL_TC_AEEVT_CLEAR	(2 << 20)
+#define        ATMEL_TC_AEEVT_TOGGLE	(3 << 20)
+#define     ATMEL_TC_ASWTRG	(3 << 22)	/* software trigger changes TIOA */
+#define        ATMEL_TC_ASWTRG_NONE	(0 << 22)
+#define        ATMEL_TC_ASWTRG_SET	(1 << 22)
+#define        ATMEL_TC_ASWTRG_CLEAR	(2 << 22)
+#define        ATMEL_TC_ASWTRG_TOGGLE	(3 << 22)
+#define     ATMEL_TC_BCPB	(3 << 24)	/* RB compare changes TIOB */
+#define        ATMEL_TC_BCPB_NONE	(0 << 24)
+#define        ATMEL_TC_BCPB_SET	(1 << 24)
+#define        ATMEL_TC_BCPB_CLEAR	(2 << 24)
+#define        ATMEL_TC_BCPB_TOGGLE	(3 << 24)
+#define     ATMEL_TC_BCPC	(3 << 26)	/* RC compare changes TIOB */
+#define        ATMEL_TC_BCPC_NONE	(0 << 26)
+#define        ATMEL_TC_BCPC_SET	(1 << 26)
+#define        ATMEL_TC_BCPC_CLEAR	(2 << 26)
+#define        ATMEL_TC_BCPC_TOGGLE	(3 << 26)
+#define     ATMEL_TC_BEEVT	(3 << 28)	/* external event changes TIOB */
+#define        ATMEL_TC_BEEVT_NONE	(0 << 28)
+#define        ATMEL_TC_BEEVT_SET	(1 << 28)
+#define        ATMEL_TC_BEEVT_CLEAR	(2 << 28)
+#define        ATMEL_TC_BEEVT_TOGGLE	(3 << 28)
+#define     ATMEL_TC_BSWTRG	(3 << 30)	/* software trigger changes TIOB */
+#define        ATMEL_TC_BSWTRG_NONE	(0 << 30)
+#define        ATMEL_TC_BSWTRG_SET	(1 << 30)
+#define        ATMEL_TC_BSWTRG_CLEAR	(2 << 30)
+#define        ATMEL_TC_BSWTRG_TOGGLE	(3 << 30)
+
+#define ATMEL_TC_CV	0x10		/* counter Value */
+#define ATMEL_TC_RA	0x14		/* register A */
+#define ATMEL_TC_RB	0x18		/* register B */
+#define ATMEL_TC_RC	0x1c		/* register C */
+
+#define ATMEL_TC_SR	0x20		/* status (read-only) */
+/* Status-only flags */
+#define     ATMEL_TC_CLKSTA	(1 << 16)	/* clock enabled */
+#define     ATMEL_TC_MTIOA	(1 << 17)	/* TIOA mirror */
+#define     ATMEL_TC_MTIOB	(1 << 18)	/* TIOB mirror */
+
+#define ATMEL_TC_IER	0x24		/* interrupt enable (write-only) */
+#define ATMEL_TC_IDR	0x28		/* interrupt disable (write-only) */
+#define ATMEL_TC_IMR	0x2c		/* interrupt mask (read-only) */
+
+/* Status and IRQ flags */
+#define     ATMEL_TC_COVFS	(1 <<  0)	/* counter overflow */
+#define     ATMEL_TC_LOVRS	(1 <<  1)	/* load overrun */
+#define     ATMEL_TC_CPAS	(1 <<  2)	/* RA compare */
+#define     ATMEL_TC_CPBS	(1 <<  3)	/* RB compare */
+#define     ATMEL_TC_CPCS	(1 <<  4)	/* RC compare */
+#define     ATMEL_TC_LDRAS	(1 <<  5)	/* RA loading */
+#define     ATMEL_TC_LDRBS	(1 <<  6)	/* RB loading */
+#define     ATMEL_TC_ETRGS	(1 <<  7)	/* external trigger */
+
+#endif
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
new file mode 100644
index 00000000000..6311fa2d9f8
--- /dev/null
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,22 @@
+/*
+ * Platform data definitions for Atmel USBA gadget driver.
+ */
+#ifndef __LINUX_USB_USBA_H
+#define __LINUX_USB_USBA_H
+
+struct usba_ep_data {
+	char	*name;
+	int	index;
+	int	fifo_size;
+	int	nr_banks;
+	int	can_dma;
+	int	can_isoc;
+};
+
+struct usba_platform_data {
+	int			vbus_pin;
+	int			num_ep;
+	struct usba_ep_data	ep[0];
+};
+
+#endif /* __LINUX_USB_USBA_H */