summaryrefslogtreecommitdiffstats
path: root/kernel/rcutree_plugin.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-05 13:23:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-05 13:23:27 -0700
commit534c97b0950b1967bca1c753aeaed32f5db40264 (patch)
tree9421d26e4f6d479d1bc32b036a731b065daab0fa /kernel/rcutree_plugin.h
parent64049d1973c1735f543eb7a55653e291e108b0cb (diff)
parent265f22a975c1e4cc3a4d1f94a3ec53ffbb6f5b9f (diff)
Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar: "This tree from Frederic Weisbecker adds a new, (exciting! :-) core kernel feature to the timer and scheduler subsystems: 'full dynticks', or CONFIG_NO_HZ_FULL=y. This feature extends the nohz variable-size timer tick feature from idle to busy CPUs (running at most one task) as well, potentially reducing the number of timer interrupts significantly. This feature got motivated by real-time folks and the -rt tree, but the general utility and motivation of full-dynticks runs wider than that: - HPC workloads get faster: CPUs running a single task should be able to utilize a maximum amount of CPU power. A periodic timer tick at HZ=1000 can cause a constant overhead of up to 1.0%. This feature removes that overhead - and speeds up the system by 0.5%-1.0% on typical distro configs even on modern systems. - Real-time workload latency reduction: CPUs running critical tasks should experience as little jitter as possible. The last remaining source of kernel-related jitter was the periodic timer tick. - A single task executing on a CPU is a pretty common situation, especially with an increasing number of cores/CPUs, so this feature helps desktop and mobile workloads as well. The cost of the feature is mainly related to increased timer reprogramming overhead when a CPU switches its tick period, and thus slightly longer to-idle and from-idle latency. Configuration-wise a third mode of operation is added to the existing two NOHZ kconfig modes: - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named as a config option. This is the traditional Linux periodic tick design: there's a HZ tick going on all the time, regardless of whether a CPU is idle or not. - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the periodic tick when a CPU enters idle mode. - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the tick when a CPU is idle, also slows the tick down to 1 Hz (one timer interrupt per second) when only a single task is running on a CPU. The .config behavior is compatible: existing !CONFIG_NO_HZ and CONFIG_NO_HZ=y settings get translated to the new values, without the user having to configure anything. CONFIG_NO_HZ_FULL is turned off by default. This feature is based on a lot of infrastructure work that has been steadily going upstream in the last 2-3 cycles: related RCU support and non-periodic cputime support in particular is upstream already. This tree adds the final pieces and activates the feature. The pull request is marked RFC because: - it's marked 64-bit only at the moment - the 32-bit support patch is small but did not get ready in time. - it has a number of fresh commits that came in after the merge window. The overwhelming majority of commits are from before the merge window, but still some aspects of the tree are fresh and so I marked it RFC. - it's a pretty wide-reaching feature with lots of effects - and while the components have been in testing for some time, the full combination is still not very widely used. That it's default-off should reduce its regression abilities and obviously there are no known regressions with CONFIG_NO_HZ_FULL=y enabled either. - the feature is not completely idempotent: there is no 100% equivalent replacement for a periodic scheduler/timer tick. In particular there's ongoing work to map out and reduce its effects on scheduler load-balancing and statistics. This should not impact correctness though, there are no known regressions related to this feature at this point. - it's a pretty ambitious feature that with time will likely be enabled by most Linux distros, and we'd like you to make input on its design/implementation, if you dislike some aspect we missed. Without flaming us to crisp! :-) Future plans: - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off the periodic tick altogether when there's a single busy task on a CPU. We'd first like 1 Hz to be exposed more widely before we go for the 0 Hz target though. - once we reach 0 Hz we can remove the periodic tick assumption from nr_running>=2 as well, by essentially interrupting busy tasks only as frequently as the sched_latency constraints require us to do - once every 4-40 msecs, depending on nr_running. I am personally leaning towards biting the bullet and doing this in v3.10, like the -rt tree this effort has been going on for too long - but the final word is up to you as usual. More technical details can be found in Documentation/timers/NO_HZ.txt" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) sched: Keep at least 1 tick per second for active dynticks tasks rcu: Fix full dynticks' dependency on wide RCU nocb mode nohz: Protect smp_processor_id() in tick_nohz_task_switch() nohz_full: Add documentation. cputime_nsecs: use math64.h for nsec resolution conversion helpers nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config nohz: Reduce overhead under high-freq idling patterns nohz: Remove full dynticks' superfluous dependency on RCU tree nohz: Fix unavailable tick_stop tracepoint in dynticks idle nohz: Add basic tracing nohz: Select wide RCU nocb for full dynticks nohz: Disable the tick when irq resume in full dynticks CPU nohz: Re-evaluate the tick for the new task after a context switch nohz: Prepare to stop the tick on irq exit nohz: Implement full dynticks kick nohz: Re-evaluate the tick from the scheduler IPI sched: New helper to prevent from stopping the tick in full dynticks sched: Kick full dynticks CPU that have more than one task enqueued. perf: New helper to prevent full dynticks CPUs from stopping tick perf: Kick full dynticks CPU if events rotation is needed ...
Diffstat (limited to 'kernel/rcutree_plugin.h')
-rw-r--r--kernel/rcutree_plugin.h33
1 files changed, 23 insertions, 10 deletions
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index d084ae3f281..170814dc418 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -28,6 +28,7 @@
#include <linux/gfp.h>
#include <linux/oom.h>
#include <linux/smpboot.h>
+#include <linux/tick.h>
#define RCU_KTHREAD_PRIO 1
@@ -1705,7 +1706,7 @@ static void rcu_prepare_for_idle(int cpu)
return;
/* If this is a no-CBs CPU, no callbacks, just return. */
- if (is_nocb_cpu(cpu))
+ if (rcu_is_nocb_cpu(cpu))
return;
/*
@@ -1747,7 +1748,7 @@ static void rcu_cleanup_after_idle(int cpu)
struct rcu_data *rdp;
struct rcu_state *rsp;
- if (is_nocb_cpu(cpu))
+ if (rcu_is_nocb_cpu(cpu))
return;
rcu_try_advance_all_cbs();
for_each_rcu_flavor(rsp) {
@@ -2052,7 +2053,7 @@ static void rcu_init_one_nocb(struct rcu_node *rnp)
}
/* Is the specified CPU a no-CPUs CPU? */
-static bool is_nocb_cpu(int cpu)
+bool rcu_is_nocb_cpu(int cpu)
{
if (have_rcu_nocb_mask)
return cpumask_test_cpu(cpu, rcu_nocb_mask);
@@ -2110,7 +2111,7 @@ static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy)
{
- if (!is_nocb_cpu(rdp->cpu))
+ if (!rcu_is_nocb_cpu(rdp->cpu))
return 0;
__call_rcu_nocb_enqueue(rdp, rhp, &rhp->next, 1, lazy);
if (__is_kfree_rcu_offset((unsigned long)rhp->func))
@@ -2134,7 +2135,7 @@ static bool __maybe_unused rcu_nocb_adopt_orphan_cbs(struct rcu_state *rsp,
long qll = rsp->qlen_lazy;
/* If this is not a no-CBs CPU, tell the caller to do it the old way. */
- if (!is_nocb_cpu(smp_processor_id()))
+ if (!rcu_is_nocb_cpu(smp_processor_id()))
return 0;
rsp->qlen = 0;
rsp->qlen_lazy = 0;
@@ -2306,11 +2307,6 @@ static void rcu_init_one_nocb(struct rcu_node *rnp)
{
}
-static bool is_nocb_cpu(int cpu)
-{
- return false;
-}
-
static bool __call_rcu_nocb(struct rcu_data *rdp, struct rcu_head *rhp,
bool lazy)
{
@@ -2337,3 +2333,20 @@ static bool init_nocb_callback_list(struct rcu_data *rdp)
}
#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
+
+/*
+ * An adaptive-ticks CPU can potentially execute in kernel mode for an
+ * arbitrarily long period of time with the scheduling-clock tick turned
+ * off. RCU will be paying attention to this CPU because it is in the
+ * kernel, but the CPU cannot be guaranteed to be executing the RCU state
+ * machine because the scheduling-clock tick has been disabled. Therefore,
+ * if an adaptive-ticks CPU is failing to respond to the current grace
+ * period and has not be idle from an RCU perspective, kick it.
+ */
+static void rcu_kick_nohz_cpu(int cpu)
+{
+#ifdef CONFIG_NO_HZ_FULL
+ if (tick_nohz_full_cpu(cpu))
+ smp_send_reschedule(cpu);
+#endif /* #ifdef CONFIG_NO_HZ_FULL */
+}