block: optionally snapshot page contents to provide stable pages during write

This provides a band-aid to provide stable page writes on jbd without
needing to backport the fixed locking and page writeback bit handling
schemes of jbd2.  The band-aid works by using bounce buffers to snapshot
page contents instead of waiting.

For those wondering about the ext3 bandage -- fixing the jbd locking
(which was done as part of ext4dev years ago) is a lot of surgery, and
setting PG_writeback on data pages when we actually hold the page lock
dropped ext3 performance by nearly an order of magnitude.  If we're
going to migrate iscsi and raid to use stable page writes, the
complaints about high latency will likely return.  We might as well
centralize their page snapshotting thing to one place.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 61 insertions, 4 deletions

diff --git a/mm/Kconfig b/mm/Kconfig
index 278e3ab1f16..7901d839aab 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -258,6 +258,19 @@ config BOUNCE
 	def_bool y
 	depends on BLOCK && MMU && (ZONE_DMA || HIGHMEM)
 
+# On the 'tile' arch, USB OHCI needs the bounce pool since tilegx will often
+# have more than 4GB of memory, but we don't currently use the IOTLB to present
+# a 32-bit address to OHCI.  So we need to use a bounce pool instead.
+#
+# We also use the bounce pool to provide stable page writes for jbd.  jbd
+# initiates buffer writeback without locking the page or setting PG_writeback,
+# and fixing that behavior (a second time; jbd2 doesn't have this problem) is
+# a major rework effort.  Instead, use the bounce buffer to snapshot pages
+# (until jbd goes away).  The only jbd user is ext3.
+config NEED_BOUNCE_POOL
+	bool
+	default y if (TILE && USB_OHCI_HCD) || (BLK_DEV_INTEGRITY && JBD)
+
 config NR_QUICK
 	int
 	depends on QUICKLIST
diff --git a/mm/bounce.c b/mm/bounce.c
index 04208677556..5f890176860 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -178,8 +178,45 @@ static void bounce_end_io_read_isa(struct bio *bio, int err)
 	__bounce_end_io_read(bio, isa_page_pool, err);
 }
 
+#ifdef CONFIG_NEED_BOUNCE_POOL
+static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
+{
+	struct page *page;
+	struct backing_dev_info *bdi;
+	struct address_space *mapping;
+	struct bio_vec *from;
+	int i;
+
+	if (bio_data_dir(bio) != WRITE)
+		return 0;
+
+	if (!bdi_cap_stable_pages_required(&q->backing_dev_info))
+		return 0;
+
+	/*
+	 * Based on the first page that has a valid mapping, decide whether or
+	 * not we have to employ bounce buffering to guarantee stable pages.
+	 */
+	bio_for_each_segment(from, bio, i) {
+		page = from->bv_page;
+		mapping = page_mapping(page);
+		if (!mapping)
+			continue;
+		bdi = mapping->backing_dev_info;
+		return mapping->host->i_sb->s_flags & MS_SNAP_STABLE;
+	}
+
+	return 0;
+}
+#else
+static int must_snapshot_stable_pages(struct request_queue *q, struct bio *bio)
+{
+	return 0;
+}
+#endif /* CONFIG_NEED_BOUNCE_POOL */
+
 static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
-			       mempool_t *pool)
+			       mempool_t *pool, int force)
 {
 	struct page *page;
 	struct bio *bio = NULL;
@@ -192,7 +229,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
 		/*
 		 * is destination page below bounce pfn?
 		 */
-		if (page_to_pfn(page) <= queue_bounce_pfn(q))
+		if (page_to_pfn(page) <= queue_bounce_pfn(q) && !force)
 			continue;
 
 		/*
@@ -270,6 +307,7 @@ static void __blk_queue_bounce(struct request_queue *q, struct bio **bio_orig,
 
 void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 {
+	int must_bounce;
 	mempool_t *pool;
 
 	/*
@@ -278,13 +316,15 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 	if (!bio_has_data(*bio_orig))
 		return;
 
+	must_bounce = must_snapshot_stable_pages(q, *bio_orig);
+
 	/*
 	 * for non-isa bounce case, just check if the bounce pfn is equal
 	 * to or bigger than the highest pfn in the system -- in that case,
 	 * don't waste time iterating over bio segments
 	 */
 	if (!(q->bounce_gfp & GFP_DMA)) {
-		if (queue_bounce_pfn(q) >= blk_max_pfn)
+		if (queue_bounce_pfn(q) >= blk_max_pfn && !must_bounce)
 			return;
 		pool = page_pool;
 	} else {
@@ -295,7 +335,7 @@ void blk_queue_bounce(struct request_queue *q, struct bio **bio_orig)
 	/*
 	 * slow path
 	 */
-	__blk_queue_bounce(q, bio_orig, pool);
+	__blk_queue_bounce(q, bio_orig, pool, must_bounce);
 }
 
 EXPORT_SYMBOL(blk_queue_bounce);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 355d5ee6905..7300c9d5e1d 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2306,6 +2306,10 @@ void wait_for_stable_page(struct page *page)
 
 	if (!bdi_cap_stable_pages_required(bdi))
 		return;
+#ifdef CONFIG_NEED_BOUNCE_POOL
+	if (mapping->host->i_sb->s_flags & MS_SNAP_STABLE)
+		return;
+#endif /* CONFIG_NEED_BOUNCE_POOL */
 
 	wait_on_page_writeback(page);
 }