writeback: get rid of pdflush completely

It is now unused, so kill it off.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2 files changed, 1 insertions, 270 deletions

diff --git a/mm/Makefile b/mm/Makefile
index 5e0bd642669..147a7a7873c 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -8,7 +8,7 @@ mmu-$(CONFIG_MMU)	:= fremap.o highmem.o madvise.o memory.o mincore.o \
 			   vmalloc.o
 
 obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
-			   maccess.o page_alloc.o page-writeback.o pdflush.o \
+			   maccess.o page_alloc.o page-writeback.o \
 			   readahead.o swap.o truncate.o vmscan.o shmem.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
 			   page_isolation.o mm_init.o $(mmu-y)
diff --git a/mm/pdflush.c b/mm/pdflush.c
deleted file mode 100644
index 235ac440c44..00000000000
--- a/mm/pdflush.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * mm/pdflush.c - worker threads for writing back filesystem data
- *
- * Copyright (C) 2002, Linus Torvalds.
- *
- * 09Apr2002	Andrew Morton
- *		Initial version
- * 29Feb2004	kaos@sgi.com
- *		Move worker thread creation to kthread to avoid chewing
- *		up stack space with nested calls to kernel_thread.
- */
-
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/signal.h>
-#include <linux/spinlock.h>
-#include <linux/gfp.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/fs.h>		/* Needed by writeback.h	  */
-#include <linux/writeback.h>	/* Prototypes pdflush_operation() */
-#include <linux/kthread.h>
-#include <linux/cpuset.h>
-#include <linux/freezer.h>
-
-
-/*
- * Minimum and maximum number of pdflush instances
- */
-#define MIN_PDFLUSH_THREADS	2
-#define MAX_PDFLUSH_THREADS	8
-
-static void start_one_pdflush_thread(void);
-
-
-/*
- * The pdflush threads are worker threads for writing back dirty data.
- * Ideally, we'd like one thread per active disk spindle.  But the disk
- * topology is very hard to divine at this level.   Instead, we take
- * care in various places to prevent more than one pdflush thread from
- * performing writeback against a single filesystem.  pdflush threads
- * have the PF_FLUSHER flag set in current->flags to aid in this.
- */
-
-/*
- * All the pdflush threads.  Protected by pdflush_lock
- */
-static LIST_HEAD(pdflush_list);
-static DEFINE_SPINLOCK(pdflush_lock);
-
-/*
- * The count of currently-running pdflush threads.  Protected
- * by pdflush_lock.
- *
- * Readable by sysctl, but not writable.  Published to userspace at
- * /proc/sys/vm/nr_pdflush_threads.
- */
-int nr_pdflush_threads = 0;
-
-/*
- * The time at which the pdflush thread pool last went empty
- */
-static unsigned long last_empty_jifs;
-
-/*
- * The pdflush thread.
- *
- * Thread pool management algorithm:
- * 
- * - The minimum and maximum number of pdflush instances are bound
- *   by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
- * 
- * - If there have been no idle pdflush instances for 1 second, create
- *   a new one.
- * 
- * - If the least-recently-went-to-sleep pdflush thread has been asleep
- *   for more than one second, terminate a thread.
- */
-
-/*
- * A structure for passing work to a pdflush thread.  Also for passing
- * state information between pdflush threads.  Protected by pdflush_lock.
- */
-struct pdflush_work {
-	struct task_struct *who;	/* The thread */
-	void (*fn)(unsigned long);	/* A callback function */
-	unsigned long arg0;		/* An argument to the callback */
-	struct list_head list;		/* On pdflush_list, when idle */
-	unsigned long when_i_went_to_sleep;
-};
-
-static int __pdflush(struct pdflush_work *my_work)
-{
-	current->flags |= PF_FLUSHER | PF_SWAPWRITE;
-	set_freezable();
-	my_work->fn = NULL;
-	my_work->who = current;
-	INIT_LIST_HEAD(&my_work->list);
-
-	spin_lock_irq(&pdflush_lock);
-	for ( ; ; ) {
-		struct pdflush_work *pdf;
-
-		set_current_state(TASK_INTERRUPTIBLE);
-		list_move(&my_work->list, &pdflush_list);
-		my_work->when_i_went_to_sleep = jiffies;
-		spin_unlock_irq(&pdflush_lock);
-		schedule();
-		try_to_freeze();
-		spin_lock_irq(&pdflush_lock);
-		if (!list_empty(&my_work->list)) {
-			/*
-			 * Someone woke us up, but without removing our control
-			 * structure from the global list.  swsusp will do this
-			 * in try_to_freeze()->refrigerator().  Handle it.
-			 */
-			my_work->fn = NULL;
-			continue;
-		}
-		if (my_work->fn == NULL) {
-			printk("pdflush: bogus wakeup\n");
-			continue;
-		}
-		spin_unlock_irq(&pdflush_lock);
-
-		(*my_work->fn)(my_work->arg0);
-
-		spin_lock_irq(&pdflush_lock);
-
-		/*
-		 * Thread creation: For how long have there been zero
-		 * available threads?
-		 *
-		 * To throttle creation, we reset last_empty_jifs.
-		 */
-		if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
-			if (list_empty(&pdflush_list)) {
-				if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
-					last_empty_jifs = jiffies;
-					nr_pdflush_threads++;
-					spin_unlock_irq(&pdflush_lock);
-					start_one_pdflush_thread();
-					spin_lock_irq(&pdflush_lock);
-				}
-			}
-		}
-
-		my_work->fn = NULL;
-
-		/*
-		 * Thread destruction: For how long has the sleepiest
-		 * thread slept?
-		 */
-		if (list_empty(&pdflush_list))
-			continue;
-		if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
-			continue;
-		pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
-		if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
-			/* Limit exit rate */
-			pdf->when_i_went_to_sleep = jiffies;
-			break;					/* exeunt */
-		}
-	}
-	nr_pdflush_threads--;
-	spin_unlock_irq(&pdflush_lock);
-	return 0;
-}
-
-/*
- * Of course, my_work wants to be just a local in __pdflush().  It is
- * separated out in this manner to hopefully prevent the compiler from
- * performing unfortunate optimisations against the auto variables.  Because
- * these are visible to other tasks and CPUs.  (No problem has actually
- * been observed.  This is just paranoia).
- */
-static int pdflush(void *dummy)
-{
-	struct pdflush_work my_work;
-	cpumask_var_t cpus_allowed;
-
-	/*
-	 * Since the caller doesn't even check kthread_run() worked, let's not
-	 * freak out too much if this fails.
-	 */
-	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
-		printk(KERN_WARNING "pdflush failed to allocate cpumask\n");
-		return 0;
-	}
-
-	/*
-	 * pdflush can spend a lot of time doing encryption via dm-crypt.  We
-	 * don't want to do that at keventd's priority.
-	 */
-	set_user_nice(current, 0);
-
-	/*
-	 * Some configs put our parent kthread in a limited cpuset,
-	 * which kthread() overrides, forcing cpus_allowed == cpu_all_mask.
-	 * Our needs are more modest - cut back to our cpusets cpus_allowed.
-	 * This is needed as pdflush's are dynamically created and destroyed.
-	 * The boottime pdflush's are easily placed w/o these 2 lines.
-	 */
-	cpuset_cpus_allowed(current, cpus_allowed);
-	set_cpus_allowed_ptr(current, cpus_allowed);
-	free_cpumask_var(cpus_allowed);
-
-	return __pdflush(&my_work);
-}
-
-/*
- * Attempt to wake up a pdflush thread, and get it to do some work for you.
- * Returns zero if it indeed managed to find a worker thread, and passed your
- * payload to it.
- */
-int pdflush_operation(void (*fn)(unsigned long), unsigned long arg0)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	BUG_ON(fn == NULL);	/* Hard to diagnose if it's deferred */
-
-	spin_lock_irqsave(&pdflush_lock, flags);
-	if (list_empty(&pdflush_list)) {
-		ret = -1;
-	} else {
-		struct pdflush_work *pdf;
-
-		pdf = list_entry(pdflush_list.next, struct pdflush_work, list);
-		list_del_init(&pdf->list);
-		if (list_empty(&pdflush_list))
-			last_empty_jifs = jiffies;
-		pdf->fn = fn;
-		pdf->arg0 = arg0;
-		wake_up_process(pdf->who);
-	}
-	spin_unlock_irqrestore(&pdflush_lock, flags);
-
-	return ret;
-}
-
-static void start_one_pdflush_thread(void)
-{
-	struct task_struct *k;
-
-	k = kthread_run(pdflush, NULL, "pdflush");
-	if (unlikely(IS_ERR(k))) {
-		spin_lock_irq(&pdflush_lock);
-		nr_pdflush_threads--;
-		spin_unlock_irq(&pdflush_lock);
-	}
-}
-
-static int __init pdflush_init(void)
-{
-	int i;
-
-	/*
-	 * Pre-set nr_pdflush_threads...  If we fail to create,
-	 * the count will be decremented.
-	 */
-	nr_pdflush_threads = MIN_PDFLUSH_THREADS;
-
-	for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
-		start_one_pdflush_thread();
-	return 0;
-}
-
-module_init(pdflush_init);