summaryrefslogtreecommitdiffstats
path: root/net/ax25/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /net/ax25/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'net/ax25/Kconfig')
-rw-r--r--net/ax25/Kconfig110
1 files changed, 110 insertions, 0 deletions
diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
new file mode 100644
index 00000000000..a8993a04172
--- /dev/null
+++ b/net/ax25/Kconfig
@@ -0,0 +1,110 @@
+#
+# Amateur Radio protocols and AX.25 device configuration
+#
+# 19971130 Now in an own category to make correct compilation of the
+# AX.25 stuff easier...
+# Joerg Reuter DL1BKE <jreuter@yaina.de>
+# 19980129 Moved to net/ax25/Config.in, sourcing device drivers.
+
+menuconfig HAMRADIO
+ depends on NET
+ bool "Amateur Radio support"
+ help
+ If you want to connect your Linux box to an amateur radio, answer Y
+ here. You want to read <http://www.tapr.org/tapr/html/pkthome.html> and
+ the AX25-HOWTO, available from <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about amateur radio.
+
+comment "Packet Radio protocols"
+ depends on HAMRADIO && NET
+
+config AX25
+ tristate "Amateur Radio AX.25 Level 2 protocol"
+ depends on HAMRADIO && NET
+ ---help---
+ This is the protocol used for computer communication over amateur
+ radio. It is either used by itself for point-to-point links, or to
+ carry other protocols such as tcp/ip. To use it, you need a device
+ that connects your Linux box to your amateur radio. You can either
+ use a low speed TNC (a Terminal Node Controller acts as a kind of
+ modem connecting your computer's serial port to your radio's
+ microphone input and speaker output) supporting the KISS protocol or
+ one of the various SCC cards that are supported by the generic Z8530
+ or the DMA SCC driver. Another option are the Baycom modem serial
+ and parallel port hacks or the sound card modem (supported by their
+ own drivers). If you say Y here, you also have to say Y to one of
+ those drivers.
+
+ Information about where to get supporting software for Linux amateur
+ radio as well as information about how to configure an AX.25 port is
+ contained in the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You might also want to
+ check out the file <file:Documentation/networking/ax25.txt> in the
+ kernel source. More information about digital amateur radio in
+ general is on the WWW at
+ <http://www.tapr.org/tapr/html/pkthome.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ax25.
+
+config AX25_DAMA_SLAVE
+ bool "AX.25 DAMA Slave support"
+ depends on AX25
+ help
+ DAMA is a mechanism to prevent collisions when doing AX.25
+ networking. A DAMA server (called "master") accepts incoming traffic
+ from clients (called "slaves") and redistributes it to other slaves.
+ If you say Y here, your Linux box will act as a DAMA slave; this is
+ transparent in that you don't have to do any special DAMA
+ configuration. (Linux cannot yet act as a DAMA server.) If unsure,
+ say N.
+
+# bool ' AX.25 DAMA Master support' CONFIG_AX25_DAMA_MASTER
+config NETROM
+ tristate "Amateur Radio NET/ROM protocol"
+ depends on AX25
+ ---help---
+ NET/ROM is a network layer protocol on top of AX.25 useful for
+ routing.
+
+ A comprehensive listing of all the software for Linux amateur radio
+ users as well as information about how to configure an AX.25 port is
+ contained in the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You also might want to
+ check out the file <file:Documentation/networking/ax25.txt>. More
+ information about digital amateur radio in general is on the WWW at
+ <http://www.tapr.org/tapr/html/pkthome.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called netrom.
+
+config ROSE
+ tristate "Amateur Radio X.25 PLP (Rose)"
+ depends on AX25
+ ---help---
+ The Packet Layer Protocol (PLP) is a way to route packets over X.25
+ connections in general and amateur radio AX.25 connections in
+ particular, essentially an alternative to NET/ROM.
+
+ A comprehensive listing of all the software for Linux amateur radio
+ users as well as information about how to configure an AX.25 port is
+ contained in the AX25-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. You also might want to
+ check out the file <file:Documentation/networking/ax25.txt>. More
+ information about digital amateur radio in general is on the WWW at
+ <http://www.tapr.org/tapr/html/pkthome.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rose.
+
+
+menu "AX.25 network device drivers"
+ depends on HAMRADIO && NET && AX25!=n
+
+source "drivers/net/hamradio/Kconfig"
+
+endmenu
+