Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

50 files changed, 32233 insertions, 0 deletions

diff --git a/net/irda/Kconfig b/net/irda/Kconfig
new file mode 100644
index 00000000000..9efb17ba48a
--- /dev/null
+++ b/net/irda/Kconfig
@@ -0,0 +1,96 @@
+#
+# IrDA protocol configuration
+#
+
+menuconfig IRDA
+	depends on NET
+	tristate "IrDA (infrared) subsystem support"
+	select CRC_CCITT
+	---help---
+	  Say Y here if you want to build support for the IrDA (TM) protocols.
+	  The Infrared Data Associations (tm) specifies standards for wireless
+	  infrared communication and is supported by most laptops and PDA's.
+
+	  To use Linux support for the IrDA (tm) protocols, you will also need
+	  some user-space utilities like irattach.  For more information, see
+	  the file <file:Documentation/networking/irda.txt>.  You also want to
+	  read the IR-HOWTO, available at
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you want to exchange bits of data (vCal, vCard) with a PDA, you
+	  will need to install some OBEX application, such as OpenObex :
+	  <http://sourceforge.net/projects/openobex/>
+
+	  To compile this support as a module, choose M here: the module will
+	  be called irda.
+
+comment "IrDA protocols"
+	depends on IRDA
+
+source "net/irda/irlan/Kconfig"
+
+source "net/irda/irnet/Kconfig"
+
+source "net/irda/ircomm/Kconfig"
+
+config IRDA_ULTRA
+	bool "Ultra (connectionless) protocol"
+	depends on IRDA
+	help
+	  Say Y here to support the connectionless Ultra IRDA protocol.
+	  Ultra allows to exchange data over IrDA with really simple devices
+	  (watch, beacon) without the overhead of the IrDA protocol (no handshaking,
+	  no management frames, simple fixed header).
+	  Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1);
+
+comment "IrDA options"
+	depends on IRDA
+
+config IRDA_CACHE_LAST_LSAP
+	bool "Cache last LSAP"
+	depends on IRDA
+	help
+	  Say Y here if you want IrLMP to cache the last LSAP used.  This
+	  makes sense since most frames will be sent/received on the same
+	  connection.  Enabling this option will save a hash-lookup per frame.
+
+	  If unsure, say Y.
+
+config IRDA_FAST_RR
+	bool "Fast RRs (low latency)"
+	depends on IRDA
+	---help---
+	  Say Y here is you want IrLAP to send fast RR (Receive Ready) frames
+	  when acting as a primary station.
+	  Disabling this option will make latency over IrDA very bad. Enabling
+	  this option will make the IrDA stack send more packet than strictly
+	  necessary, thus reduce your battery life (but not that much).
+
+	  Fast RR will make IrLAP send out a RR frame immediately when
+	  receiving a frame if its own transmit queue is currently empty. This
+	  will give a lot of speed improvement when receiving much data since
+	  the secondary station will not have to wait the max. turn around
+	  time (usually 500ms) before it is allowed to transmit the next time.
+	  If the transmit queue of the secondary is also empty, the primary will
+	  start backing-off before sending another RR frame, waiting longer
+	  each time until the back-off reaches the max. turn around time.
+	  This back-off increase in controlled via
+	  /proc/sys/net/irda/fast_poll_increase
+
+	  If unsure, say Y.
+
+config IRDA_DEBUG
+	bool "Debug information"
+	depends on IRDA
+	help
+	  Say Y here if you want the IrDA subsystem to write debug information
+	  to your syslog. You can change the debug level in
+	  /proc/sys/net/irda/debug .
+	  When this option is enabled, the IrDA also perform many extra internal
+	  verifications which will usually prevent the kernel to crash in case of
+	  bugs.
+
+	  If unsure, say Y (since it makes it easier to find the bugs).
+
+source "drivers/net/irda/Kconfig"
+
diff --git a/net/irda/Makefile b/net/irda/Makefile
new file mode 100644
index 00000000000..d1366c2a39c
--- /dev/null
+++ b/net/irda/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the Linux IrDA protocol layer.
+#
+
+obj-$(CONFIG_IRDA) += irda.o
+obj-$(CONFIG_IRLAN) += irlan/
+obj-$(CONFIG_IRNET) += irnet/
+obj-$(CONFIG_IRCOMM) += ircomm/
+
+irda-y := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \
+          irlap.o irlap_event.o irlap_frame.o timer.o qos.o irqueue.o \
+          irttp.o irda_device.o irias_object.o wrapper.o af_irda.o \
+	  discovery.o parameters.o irmod.o
+irda-$(CONFIG_PROC_FS) += irproc.o
+irda-$(CONFIG_SYSCTL) += irsysctl.o
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
new file mode 100644
index 00000000000..92c6e8d4e73
--- /dev/null
+++ b/net/irda/af_irda.c
@@ -0,0 +1,2586 @@
+/*********************************************************************
+ *
+ * Filename:      af_irda.c
+ * Version:       0.9
+ * Description:   IrDA sockets implementation
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun May 31 10:12:43 1998
+ * Modified at:   Sat Dec 25 21:10:23 1999
+ * Modified by:   Dag Brattli <dag@brattli.net>
+ * Sources:       af_netroom.c, af_ax25.c, af_rose.c, af_x25.c etc.
+ *
+ *     Copyright (c) 1999 Dag Brattli <dagb@cs.uit.no>
+ *     Copyright (c) 1999-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     All Rights Reserved.
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program; if not, write to the Free Software
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *     MA 02111-1307 USA
+ *
+ *     Linux-IrDA now supports four different types of IrDA sockets:
+ *
+ *     o SOCK_STREAM:    TinyTP connections with SAR disabled. The
+ *                       max SDU size is 0 for conn. of this type
+ *     o SOCK_SEQPACKET: TinyTP connections with SAR enabled. TTP may
+ *                       fragment the messages, but will preserve
+ *                       the message boundaries
+ *     o SOCK_DGRAM:     IRDAPROTO_UNITDATA: TinyTP connections with Unitdata
+ *                       (unreliable) transfers
+ *                       IRDAPROTO_ULTRA: Connectionless and unreliable data
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/socket.h>
+#include <linux/sockios.h>
+#include <linux/init.h>
+#include <linux/net.h>
+#include <linux/irda.h>
+#include <linux/poll.h>
+
+#include <asm/ioctls.h>		/* TIOCOUTQ, TIOCINQ */
+#include <asm/uaccess.h>
+
+#include <net/sock.h>
+#include <net/tcp.h>
+
+#include <net/irda/af_irda.h>
+
+static int irda_create(struct socket *sock, int protocol);
+
+static struct proto_ops irda_stream_ops;
+static struct proto_ops irda_seqpacket_ops;
+static struct proto_ops irda_dgram_ops;
+
+#ifdef CONFIG_IRDA_ULTRA
+static struct proto_ops irda_ultra_ops;
+#define ULTRA_MAX_DATA 382
+#endif /* CONFIG_IRDA_ULTRA */
+
+#define IRDA_MAX_HEADER (TTP_MAX_HEADER)
+
+/*
+ * Function irda_data_indication (instance, sap, skb)
+ *
+ *    Received some data from TinyTP. Just queue it on the receive queue
+ *
+ */
+static int irda_data_indication(void *instance, void *sap, struct sk_buff *skb)
+{
+	struct irda_sock *self;
+	struct sock *sk;
+	int err;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	self = instance;
+	sk = instance;
+	IRDA_ASSERT(sk != NULL, return -1;);
+
+	err = sock_queue_rcv_skb(sk, skb);
+	if (err) {
+		IRDA_DEBUG(1, "%s(), error: no more mem!\n", __FUNCTION__);
+		self->rx_flow = FLOW_STOP;
+
+		/* When we return error, TTP will need to requeue the skb */
+		return err;
+	}
+
+	return 0;
+}
+
+/*
+ * Function irda_disconnect_indication (instance, sap, reason, skb)
+ *
+ *    Connection has been closed. Check reason to find out why
+ *
+ */
+static void irda_disconnect_indication(void *instance, void *sap,
+				       LM_REASON reason, struct sk_buff *skb)
+{
+	struct irda_sock *self;
+	struct sock *sk;
+
+	self = instance;
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	/* Don't care about it, but let's not leak it */
+	if(skb)
+		dev_kfree_skb(skb);
+
+	sk = instance;
+	if (sk == NULL) {
+		IRDA_DEBUG(0, "%s(%p) : BUG : sk is NULL\n",
+			   __FUNCTION__, self);
+		return;
+	}
+
+	/* Prevent race conditions with irda_release() and irda_shutdown() */
+	if (!sock_flag(sk, SOCK_DEAD) && sk->sk_state != TCP_CLOSE) {
+		sk->sk_state     = TCP_CLOSE;
+		sk->sk_err       = ECONNRESET;
+		sk->sk_shutdown |= SEND_SHUTDOWN;
+
+		sk->sk_state_change(sk);
+		/* Uh-oh... Should use sock_orphan ? */
+                sock_set_flag(sk, SOCK_DEAD);
+
+		/* Close our TSAP.
+		 * If we leave it open, IrLMP put it back into the list of
+		 * unconnected LSAPs. The problem is that any incoming request
+		 * can then be matched to this socket (and it will be, because
+		 * it is at the head of the list). This would prevent any
+		 * listening socket waiting on the same TSAP to get those
+		 * requests. Some apps forget to close sockets, or hang to it
+		 * a bit too long, so we may stay in this dead state long
+		 * enough to be noticed...
+		 * Note : all socket function do check sk->sk_state, so we are
+		 * safe...
+		 * Jean II
+		 */
+		if (self->tsap) {
+			irttp_close_tsap(self->tsap);
+			self->tsap = NULL;
+		}
+        }
+
+	/* Note : once we are there, there is not much you want to do
+	 * with the socket anymore, apart from closing it.
+	 * For example, bind() and connect() won't reset sk->sk_err,
+	 * sk->sk_shutdown and sk->sk_flags to valid values...
+	 * Jean II
+	 */
+}
+
+/*
+ * Function irda_connect_confirm (instance, sap, qos, max_sdu_size, skb)
+ *
+ *    Connections has been confirmed by the remote device
+ *
+ */
+static void irda_connect_confirm(void *instance, void *sap,
+				 struct qos_info *qos,
+				 __u32 max_sdu_size, __u8 max_header_size,
+				 struct sk_buff *skb)
+{
+	struct irda_sock *self;
+	struct sock *sk;
+
+	self = instance;
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	sk = instance;
+	if (sk == NULL) {
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	dev_kfree_skb(skb);
+	// Should be ??? skb_queue_tail(&sk->sk_receive_queue, skb);
+
+	/* How much header space do we need to reserve */
+	self->max_header_size = max_header_size;
+
+	/* IrTTP max SDU size in transmit direction */
+	self->max_sdu_size_tx = max_sdu_size;
+
+	/* Find out what the largest chunk of data that we can transmit is */
+	switch (sk->sk_type) {
+	case SOCK_STREAM:
+		if (max_sdu_size != 0) {
+			IRDA_ERROR("%s: max_sdu_size must be 0\n",
+				   __FUNCTION__);
+			return;
+		}
+		self->max_data_size = irttp_get_max_seg_size(self->tsap);
+		break;
+	case SOCK_SEQPACKET:
+		if (max_sdu_size == 0) {
+			IRDA_ERROR("%s: max_sdu_size cannot be 0\n",
+				   __FUNCTION__);
+			return;
+		}
+		self->max_data_size = max_sdu_size;
+		break;
+	default:
+		self->max_data_size = irttp_get_max_seg_size(self->tsap);
+	};
+
+	IRDA_DEBUG(2, "%s(), max_data_size=%d\n", __FUNCTION__,
+		   self->max_data_size);
+
+	memcpy(&self->qos_tx, qos, sizeof(struct qos_info));
+
+	/* We are now connected! */
+	sk->sk_state = TCP_ESTABLISHED;
+	sk->sk_state_change(sk);
+}
+
+/*
+ * Function irda_connect_indication(instance, sap, qos, max_sdu_size, userdata)
+ *
+ *    Incoming connection
+ *
+ */
+static void irda_connect_indication(void *instance, void *sap,
+				    struct qos_info *qos, __u32 max_sdu_size,
+				    __u8 max_header_size, struct sk_buff *skb)
+{
+	struct irda_sock *self;
+	struct sock *sk;
+
+	self = instance;
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	sk = instance;
+	if (sk == NULL) {
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	/* How much header space do we need to reserve */
+	self->max_header_size = max_header_size;
+
+	/* IrTTP max SDU size in transmit direction */
+	self->max_sdu_size_tx = max_sdu_size;
+
+	/* Find out what the largest chunk of data that we can transmit is */
+	switch (sk->sk_type) {
+	case SOCK_STREAM:
+		if (max_sdu_size != 0) {
+			IRDA_ERROR("%s: max_sdu_size must be 0\n",
+				   __FUNCTION__);
+			kfree_skb(skb);
+			return;
+		}
+		self->max_data_size = irttp_get_max_seg_size(self->tsap);
+		break;
+	case SOCK_SEQPACKET:
+		if (max_sdu_size == 0) {
+			IRDA_ERROR("%s: max_sdu_size cannot be 0\n",
+				   __FUNCTION__);
+			kfree_skb(skb);
+			return;
+		}
+		self->max_data_size = max_sdu_size;
+		break;
+	default:
+		self->max_data_size = irttp_get_max_seg_size(self->tsap);
+	};
+
+	IRDA_DEBUG(2, "%s(), max_data_size=%d\n", __FUNCTION__,
+		   self->max_data_size);
+
+	memcpy(&self->qos_tx, qos, sizeof(struct qos_info));
+
+	skb_queue_tail(&sk->sk_receive_queue, skb);
+	sk->sk_state_change(sk);
+}
+
+/*
+ * Function irda_connect_response (handle)
+ *
+ *    Accept incoming connection
+ *
+ */
+static void irda_connect_response(struct irda_sock *self)
+{
+	struct sk_buff *skb;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+
+	skb = dev_alloc_skb(64);
+	if (skb == NULL) {
+		IRDA_DEBUG(0, "%s() Unable to allocate sk_buff!\n",
+			   __FUNCTION__);
+		return;
+	}
+
+	/* Reserve space for MUX_CONTROL and LAP header */
+	skb_reserve(skb, IRDA_MAX_HEADER);
+
+	irttp_connect_response(self->tsap, self->max_sdu_size_rx, skb);
+}
+
+/*
+ * Function irda_flow_indication (instance, sap, flow)
+ *
+ *    Used by TinyTP to tell us if it can accept more data or not
+ *
+ */
+static void irda_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
+{
+	struct irda_sock *self;
+	struct sock *sk;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	self = instance;
+	sk = instance;
+	IRDA_ASSERT(sk != NULL, return;);
+
+	switch (flow) {
+	case FLOW_STOP:
+		IRDA_DEBUG(1, "%s(), IrTTP wants us to slow down\n",
+			   __FUNCTION__);
+		self->tx_flow = flow;
+		break;
+	case FLOW_START:
+		self->tx_flow = flow;
+		IRDA_DEBUG(1, "%s(), IrTTP wants us to start again\n",
+			   __FUNCTION__);
+		wake_up_interruptible(sk->sk_sleep);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown flow command!\n", __FUNCTION__);
+		/* Unknown flow command, better stop */
+		self->tx_flow = flow;
+		break;
+	}
+}
+
+/*
+ * Function irda_getvalue_confirm (obj_id, value, priv)
+ *
+ *    Got answer from remote LM-IAS, just pass object to requester...
+ *
+ * Note : duplicate from above, but we need our own version that
+ * doesn't touch the dtsap_sel and save the full value structure...
+ */
+static void irda_getvalue_confirm(int result, __u16 obj_id,
+				  struct ias_value *value, void *priv)
+{
+	struct irda_sock *self;
+
+	self = (struct irda_sock *) priv;
+	if (!self) {
+		IRDA_WARNING("%s: lost myself!\n", __FUNCTION__);
+		return;
+	}
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	/* We probably don't need to make any more queries */
+	iriap_close(self->iriap);
+	self->iriap = NULL;
+
+	/* Check if request succeeded */
+	if (result != IAS_SUCCESS) {
+		IRDA_DEBUG(1, "%s(), IAS query failed! (%d)\n", __FUNCTION__,
+			   result);
+
+		self->errno = result;	/* We really need it later */
+
+		/* Wake up any processes waiting for result */
+		wake_up_interruptible(&self->query_wait);
+
+		return;
+	}
+
+	/* Pass the object to the caller (so the caller must delete it) */
+	self->ias_result = value;
+	self->errno = 0;
+
+	/* Wake up any processes waiting for result */
+	wake_up_interruptible(&self->query_wait);
+}
+
+/*
+ * Function irda_selective_discovery_indication (discovery)
+ *
+ *    Got a selective discovery indication from IrLMP.
+ *
+ * IrLMP is telling us that this node is new and matching our hint bit
+ * filter. Wake up any process waiting for answer...
+ */
+static void irda_selective_discovery_indication(discinfo_t *discovery,
+						DISCOVERY_MODE mode,
+						void *priv)
+{
+	struct irda_sock *self;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	self = (struct irda_sock *) priv;
+	if (!self) {
+		IRDA_WARNING("%s: lost myself!\n", __FUNCTION__);
+		return;
+	}
+
+	/* Pass parameter to the caller */
+	self->cachedaddr = discovery->daddr;
+
+	/* Wake up process if its waiting for device to be discovered */
+	wake_up_interruptible(&self->query_wait);
+}
+
+/*
+ * Function irda_discovery_timeout (priv)
+ *
+ *    Timeout in the selective discovery process
+ *
+ * We were waiting for a node to be discovered, but nothing has come up
+ * so far. Wake up the user and tell him that we failed...
+ */
+static void irda_discovery_timeout(u_long priv)
+{
+	struct irda_sock *self;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	self = (struct irda_sock *) priv;
+	IRDA_ASSERT(self != NULL, return;);
+
+	/* Nothing for the caller */
+	self->cachelog = NULL;
+	self->cachedaddr = 0;
+	self->errno = -ETIME;
+
+	/* Wake up process if its still waiting... */
+	wake_up_interruptible(&self->query_wait);
+}
+
+/*
+ * Function irda_open_tsap (self)
+ *
+ *    Open local Transport Service Access Point (TSAP)
+ *
+ */
+static int irda_open_tsap(struct irda_sock *self, __u8 tsap_sel, char *name)
+{
+	notify_t notify;
+
+	if (self->tsap) {
+		IRDA_WARNING("%s: busy!\n", __FUNCTION__);
+		return -EBUSY;
+	}
+
+	/* Initialize callbacks to be used by the IrDA stack */
+	irda_notify_init(&notify);
+	notify.connect_confirm       = irda_connect_confirm;
+	notify.connect_indication    = irda_connect_indication;
+	notify.disconnect_indication = irda_disconnect_indication;
+	notify.data_indication       = irda_data_indication;
+	notify.udata_indication	     = irda_data_indication;
+	notify.flow_indication       = irda_flow_indication;
+	notify.instance = self;
+	strncpy(notify.name, name, NOTIFY_MAX_NAME);
+
+	self->tsap = irttp_open_tsap(tsap_sel, DEFAULT_INITIAL_CREDIT,
+				     &notify);
+	if (self->tsap == NULL) {
+		IRDA_DEBUG(0, "%s(), Unable to allocate TSAP!\n",
+			   __FUNCTION__);
+		return -ENOMEM;
+	}
+	/* Remember which TSAP selector we actually got */
+	self->stsap_sel = self->tsap->stsap_sel;
+
+	return 0;
+}
+
+/*
+ * Function irda_open_lsap (self)
+ *
+ *    Open local Link Service Access Point (LSAP). Used for opening Ultra
+ *    sockets
+ */
+#ifdef CONFIG_IRDA_ULTRA
+static int irda_open_lsap(struct irda_sock *self, int pid)
+{
+	notify_t notify;
+
+	if (self->lsap) {
+		IRDA_WARNING("%s(), busy!\n", __FUNCTION__);
+		return -EBUSY;
+	}
+
+	/* Initialize callbacks to be used by the IrDA stack */
+	irda_notify_init(&notify);
+	notify.udata_indication	= irda_data_indication;
+	notify.instance = self;
+	strncpy(notify.name, "Ultra", NOTIFY_MAX_NAME);
+
+	self->lsap = irlmp_open_lsap(LSAP_CONNLESS, &notify, pid);
+	if (self->lsap == NULL) {
+		IRDA_DEBUG( 0, "%s(), Unable to allocate LSAP!\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irda_find_lsap_sel (self, name)
+ *
+ *    Try to lookup LSAP selector in remote LM-IAS
+ *
+ * Basically, we start a IAP query, and then go to sleep. When the query
+ * return, irda_getvalue_confirm will wake us up, and we can examine the
+ * result of the query...
+ * Note that in some case, the query fail even before we go to sleep,
+ * creating some races...
+ */
+static int irda_find_lsap_sel(struct irda_sock *self, char *name)
+{
+	IRDA_DEBUG(2, "%s(%p, %s)\n", __FUNCTION__, self, name);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	if (self->iriap) {
+		IRDA_WARNING("%s(): busy with a previous query\n",
+			     __FUNCTION__);
+		return -EBUSY;
+	}
+
+	self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+				 irda_getvalue_confirm);
+	if(self->iriap == NULL)
+		return -ENOMEM;
+
+	/* Treat unexpected wakeup as disconnect */
+	self->errno = -EHOSTUNREACH;
+
+	/* Query remote LM-IAS */
+	iriap_getvaluebyclass_request(self->iriap, self->saddr, self->daddr,
+				      name, "IrDA:TinyTP:LsapSel");
+
+	/* Wait for answer, if not yet finished (or failed) */
+	if (wait_event_interruptible(self->query_wait, (self->iriap==NULL)))
+		/* Treat signals as disconnect */
+		return -EHOSTUNREACH;
+
+	/* Check what happened */
+	if (self->errno)
+	{
+		/* Requested object/attribute doesn't exist */
+		if((self->errno == IAS_CLASS_UNKNOWN) ||
+		   (self->errno == IAS_ATTRIB_UNKNOWN))
+			return (-EADDRNOTAVAIL);
+		else
+			return (-EHOSTUNREACH);
+	}
+
+	/* Get the remote TSAP selector */
+	switch (self->ias_result->type) {
+	case IAS_INTEGER:
+		IRDA_DEBUG(4, "%s() int=%d\n",
+			   __FUNCTION__, self->ias_result->t.integer);
+
+		if (self->ias_result->t.integer != -1)
+			self->dtsap_sel = self->ias_result->t.integer;
+		else
+			self->dtsap_sel = 0;
+		break;
+	default:
+		self->dtsap_sel = 0;
+		IRDA_DEBUG(0, "%s(), bad type!\n", __FUNCTION__);
+		break;
+	}
+	if (self->ias_result)
+		irias_delete_value(self->ias_result);
+
+	if (self->dtsap_sel)
+		return 0;
+
+	return -EADDRNOTAVAIL;
+}
+
+/*
+ * Function irda_discover_daddr_and_lsap_sel (self, name)
+ *
+ *    This try to find a device with the requested service.
+ *
+ * It basically look into the discovery log. For each address in the list,
+ * it queries the LM-IAS of the device to find if this device offer
+ * the requested service.
+ * If there is more than one node supporting the service, we complain
+ * to the user (it should move devices around).
+ * The, we set both the destination address and the lsap selector to point
+ * on the service on the unique device we have found.
+ *
+ * Note : this function fails if there is more than one device in range,
+ * because IrLMP doesn't disconnect the LAP when the last LSAP is closed.
+ * Moreover, we would need to wait the LAP disconnection...
+ */
+static int irda_discover_daddr_and_lsap_sel(struct irda_sock *self, char *name)
+{
+	discinfo_t *discoveries;	/* Copy of the discovery log */
+	int	number;			/* Number of nodes in the log */
+	int	i;
+	int	err = -ENETUNREACH;
+	__u32	daddr = DEV_ADDR_ANY;	/* Address we found the service on */
+	__u8	dtsap_sel = 0x0;	/* TSAP associated with it */
+
+	IRDA_DEBUG(2, "%s(), name=%s\n", __FUNCTION__, name);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	/* Ask lmp for the current discovery log
+	 * Note : we have to use irlmp_get_discoveries(), as opposed
+	 * to play with the cachelog directly, because while we are
+	 * making our ias query, le log might change... */
+	discoveries = irlmp_get_discoveries(&number, self->mask.word,
+					    self->nslots);
+	/* Check if the we got some results */
+	if (discoveries == NULL)
+		return -ENETUNREACH;	/* No nodes discovered */
+
+	/*
+	 * Now, check all discovered devices (if any), and connect
+	 * client only about the services that the client is
+	 * interested in...
+	 */
+	for(i = 0; i < number; i++) {
+		/* Try the address in the log */
+		self->daddr = discoveries[i].daddr;
+		self->saddr = 0x0;
+		IRDA_DEBUG(1, "%s(), trying daddr = %08x\n",
+			   __FUNCTION__, self->daddr);
+
+		/* Query remote LM-IAS for this service */
+		err = irda_find_lsap_sel(self, name);
+		switch (err) {
+		case 0:
+			/* We found the requested service */
+			if(daddr != DEV_ADDR_ANY) {
+				IRDA_DEBUG(1, "%s(), discovered service ''%s'' in two different devices !!!\n",
+					   __FUNCTION__, name);
+				self->daddr = DEV_ADDR_ANY;
+				kfree(discoveries);
+				return(-ENOTUNIQ);
+			}
+			/* First time we found that one, save it ! */
+			daddr = self->daddr;
+			dtsap_sel = self->dtsap_sel;
+			break;
+		case -EADDRNOTAVAIL:
+			/* Requested service simply doesn't exist on this node */
+			break;
+		default:
+			/* Something bad did happen :-( */
+			IRDA_DEBUG(0, "%s(), unexpected IAS query failure\n", __FUNCTION__);
+			self->daddr = DEV_ADDR_ANY;
+			kfree(discoveries);
+			return(-EHOSTUNREACH);
+			break;
+		}
+	}
+	/* Cleanup our copy of the discovery log */
+	kfree(discoveries);
+
+	/* Check out what we found */
+	if(daddr == DEV_ADDR_ANY) {
+		IRDA_DEBUG(1, "%s(), cannot discover service ''%s'' in any device !!!\n",
+			   __FUNCTION__, name);
+		self->daddr = DEV_ADDR_ANY;
+		return(-EADDRNOTAVAIL);
+	}
+
+	/* Revert back to discovered device & service */
+	self->daddr = daddr;
+	self->saddr = 0x0;
+	self->dtsap_sel = dtsap_sel;
+
+	IRDA_DEBUG(1, "%s(), discovered requested service ''%s'' at address %08x\n",
+		   __FUNCTION__, name, self->daddr);
+
+	return 0;
+}
+
+/*
+ * Function irda_getname (sock, uaddr, uaddr_len, peer)
+ *
+ *    Return the our own, or peers socket address (sockaddr_irda)
+ *
+ */
+static int irda_getname(struct socket *sock, struct sockaddr *uaddr,
+			int *uaddr_len, int peer)
+{
+	struct sockaddr_irda saddr;
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+
+	if (peer) {
+		if (sk->sk_state != TCP_ESTABLISHED)
+			return -ENOTCONN;
+
+		saddr.sir_family = AF_IRDA;
+		saddr.sir_lsap_sel = self->dtsap_sel;
+		saddr.sir_addr = self->daddr;
+	} else {
+		saddr.sir_family = AF_IRDA;
+		saddr.sir_lsap_sel = self->stsap_sel;
+		saddr.sir_addr = self->saddr;
+	}
+
+	IRDA_DEBUG(1, "%s(), tsap_sel = %#x\n", __FUNCTION__, saddr.sir_lsap_sel);
+	IRDA_DEBUG(1, "%s(), addr = %08x\n", __FUNCTION__, saddr.sir_addr);
+
+	/* uaddr_len come to us uninitialised */
+	*uaddr_len = sizeof (struct sockaddr_irda);
+	memcpy(uaddr, &saddr, *uaddr_len);
+
+	return 0;
+}
+
+/*
+ * Function irda_listen (sock, backlog)
+ *
+ *    Just move to the listen state
+ *
+ */
+static int irda_listen(struct socket *sock, int backlog)
+{
+	struct sock *sk = sock->sk;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) &&
+	    (sk->sk_type != SOCK_DGRAM))
+		return -EOPNOTSUPP;
+
+	if (sk->sk_state != TCP_LISTEN) {
+		sk->sk_max_ack_backlog = backlog;
+		sk->sk_state           = TCP_LISTEN;
+
+		return 0;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+/*
+ * Function irda_bind (sock, uaddr, addr_len)
+ *
+ *    Used by servers to register their well known TSAP
+ *
+ */
+static int irda_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
+{
+	struct sock *sk = sock->sk;
+	struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr;
+	struct irda_sock *self = irda_sk(sk);
+	int err;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	if (addr_len != sizeof(struct sockaddr_irda))
+		return -EINVAL;
+
+#ifdef CONFIG_IRDA_ULTRA
+	/* Special care for Ultra sockets */
+	if ((sk->sk_type == SOCK_DGRAM) &&
+	    (sk->sk_protocol == IRDAPROTO_ULTRA)) {
+		self->pid = addr->sir_lsap_sel;
+		if (self->pid & 0x80) {
+			IRDA_DEBUG(0, "%s(), extension in PID not supp!\n", __FUNCTION__);
+			return -EOPNOTSUPP;
+		}
+		err = irda_open_lsap(self, self->pid);
+		if (err < 0)
+			return err;
+
+		/* Pretend we are connected */
+		sock->state = SS_CONNECTED;
+		sk->sk_state   = TCP_ESTABLISHED;
+
+		return 0;
+	}
+#endif /* CONFIG_IRDA_ULTRA */
+
+	err = irda_open_tsap(self, addr->sir_lsap_sel, addr->sir_name);
+	if (err < 0)
+		return err;
+
+	/*  Register with LM-IAS */
+	self->ias_obj = irias_new_object(addr->sir_name, jiffies);
+	irias_add_integer_attrib(self->ias_obj, "IrDA:TinyTP:LsapSel",
+				 self->stsap_sel, IAS_KERNEL_ATTR);
+	irias_insert_object(self->ias_obj);
+
+	return 0;
+}
+
+/*
+ * Function irda_accept (sock, newsock, flags)
+ *
+ *    Wait for incoming connection
+ *
+ */
+static int irda_accept(struct socket *sock, struct socket *newsock, int flags)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *new, *self = irda_sk(sk);
+	struct sock *newsk;
+	struct sk_buff *skb;
+	int err;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	err = irda_create(newsock, sk->sk_protocol);
+	if (err)
+		return err;
+
+	if (sock->state != SS_UNCONNECTED)
+		return -EINVAL;
+
+	if ((sk = sock->sk) == NULL)
+		return -EINVAL;
+
+	if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) &&
+	    (sk->sk_type != SOCK_DGRAM))
+		return -EOPNOTSUPP;
+
+	if (sk->sk_state != TCP_LISTEN)
+		return -EINVAL;
+
+	/*
+	 *	The read queue this time is holding sockets ready to use
+	 *	hooked into the SABM we saved
+	 */
+
+	/*
+	 * We can perform the accept only if there is incoming data
+	 * on the listening socket.
+	 * So, we will block the caller until we receive any data.
+	 * If the caller was waiting on select() or poll() before
+	 * calling us, the data is waiting for us ;-)
+	 * Jean II
+	 */
+	skb = skb_dequeue(&sk->sk_receive_queue);
+	if (skb == NULL) {
+		int ret = 0;
+		DECLARE_WAITQUEUE(waitq, current);
+
+		/* Non blocking operation */
+		if (flags & O_NONBLOCK)
+			return -EWOULDBLOCK;
+
+		/* The following code is a cut'n'paste of the
+		 * wait_event_interruptible() macro.
+		 * We don't us the macro because the condition has
+		 * side effects : we want to make sure that only one
+		 * skb get dequeued - Jean II */
+		add_wait_queue(sk->sk_sleep, &waitq);
+		for (;;) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			skb = skb_dequeue(&sk->sk_receive_queue);
+			if (skb != NULL)
+				break;
+			if (!signal_pending(current)) {
+				schedule();
+				continue;
+			}
+			ret = -ERESTARTSYS;
+			break;
+		}
+		current->state = TASK_RUNNING;
+		remove_wait_queue(sk->sk_sleep, &waitq);
+		if(ret)
+			return -ERESTARTSYS;
+	}
+
+	newsk = newsock->sk;
+	newsk->sk_state = TCP_ESTABLISHED;
+
+	new = irda_sk(newsk);
+	IRDA_ASSERT(new != NULL, return -1;);
+
+	/* Now attach up the new socket */
+	new->tsap = irttp_dup(self->tsap, new);
+	if (!new->tsap) {
+		IRDA_DEBUG(0, "%s(), dup failed!\n", __FUNCTION__);
+		kfree_skb(skb);
+		return -1;
+	}
+
+	new->stsap_sel = new->tsap->stsap_sel;
+	new->dtsap_sel = new->tsap->dtsap_sel;
+	new->saddr = irttp_get_saddr(new->tsap);
+	new->daddr = irttp_get_daddr(new->tsap);
+
+	new->max_sdu_size_tx = self->max_sdu_size_tx;
+	new->max_sdu_size_rx = self->max_sdu_size_rx;
+	new->max_data_size   = self->max_data_size;
+	new->max_header_size = self->max_header_size;
+
+	memcpy(&new->qos_tx, &self->qos_tx, sizeof(struct qos_info));
+
+	/* Clean up the original one to keep it in listen state */
+	irttp_listen(self->tsap);
+
+	/* Wow ! What is that ? Jean II */
+	skb->sk = NULL;
+	skb->destructor = NULL;
+	kfree_skb(skb);
+	sk->sk_ack_backlog--;
+
+	newsock->state = SS_CONNECTED;
+
+	irda_connect_response(new);
+
+	return 0;
+}
+
+/*
+ * Function irda_connect (sock, uaddr, addr_len, flags)
+ *
+ *    Connect to a IrDA device
+ *
+ * The main difference with a "standard" connect is that with IrDA we need
+ * to resolve the service name into a TSAP selector (in TCP, port number
+ * doesn't have to be resolved).
+ * Because of this service name resoltion, we can offer "auto-connect",
+ * where we connect to a service without specifying a destination address.
+ *
+ * Note : by consulting "errno", the user space caller may learn the cause
+ * of the failure. Most of them are visible in the function, others may come
+ * from subroutines called and are listed here :
+ *	o EBUSY : already processing a connect
+ *	o EHOSTUNREACH : bad addr->sir_addr argument
+ *	o EADDRNOTAVAIL : bad addr->sir_name argument
+ *	o ENOTUNIQ : more than one node has addr->sir_name (auto-connect)
+ *	o ENETUNREACH : no node found on the network (auto-connect)
+ */
+static int irda_connect(struct socket *sock, struct sockaddr *uaddr,
+			int addr_len, int flags)
+{
+	struct sock *sk = sock->sk;
+	struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr;
+	struct irda_sock *self = irda_sk(sk);
+	int err;
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	/* Don't allow connect for Ultra sockets */
+	if ((sk->sk_type == SOCK_DGRAM) && (sk->sk_protocol == IRDAPROTO_ULTRA))
+		return -ESOCKTNOSUPPORT;
+
+	if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) {
+		sock->state = SS_CONNECTED;
+		return 0;   /* Connect completed during a ERESTARTSYS event */
+	}
+
+	if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) {
+		sock->state = SS_UNCONNECTED;
+		return -ECONNREFUSED;
+	}
+
+	if (sk->sk_state == TCP_ESTABLISHED)
+		return -EISCONN;      /* No reconnect on a seqpacket socket */
+
+	sk->sk_state   = TCP_CLOSE;
+	sock->state = SS_UNCONNECTED;
+
+	if (addr_len != sizeof(struct sockaddr_irda))
+		return -EINVAL;
+
+	/* Check if user supplied any destination device address */
+	if ((!addr->sir_addr) || (addr->sir_addr == DEV_ADDR_ANY)) {
+		/* Try to find one suitable */
+		err = irda_discover_daddr_and_lsap_sel(self, addr->sir_name);
+		if (err) {
+			IRDA_DEBUG(0, "%s(), auto-connect failed!\n", __FUNCTION__);
+			return err;
+		}
+	} else {
+		/* Use the one provided by the user */
+		self->daddr = addr->sir_addr;
+		IRDA_DEBUG(1, "%s(), daddr = %08x\n", __FUNCTION__, self->daddr);
+
+		/* If we don't have a valid service name, we assume the
+		 * user want to connect on a specific LSAP. Prevent
+		 * the use of invalid LSAPs (IrLMP 1.1 p10). Jean II */
+		if((addr->sir_name[0] != '\0') ||
+		   (addr->sir_lsap_sel >= 0x70)) {
+			/* Query remote LM-IAS using service name */
+			err = irda_find_lsap_sel(self, addr->sir_name);
+			if (err) {
+				IRDA_DEBUG(0, "%s(), connect failed!\n", __FUNCTION__);
+				return err;
+			}
+		} else {
+			/* Directly connect to the remote LSAP
+			 * specified by the sir_lsap field.
+			 * Please use with caution, in IrDA LSAPs are
+			 * dynamic and there is no "well-known" LSAP. */
+			self->dtsap_sel = addr->sir_lsap_sel;
+		}
+	}
+
+	/* Check if we have opened a local TSAP */
+	if (!self->tsap)
+		irda_open_tsap(self, LSAP_ANY, addr->sir_name);
+
+	/* Move to connecting socket, start sending Connect Requests */
+	sock->state = SS_CONNECTING;
+	sk->sk_state   = TCP_SYN_SENT;
+
+	/* Connect to remote device */
+	err = irttp_connect_request(self->tsap, self->dtsap_sel,
+				    self->saddr, self->daddr, NULL,
+				    self->max_sdu_size_rx, NULL);
+	if (err) {
+		IRDA_DEBUG(0, "%s(), connect failed!\n", __FUNCTION__);
+		return err;
+	}
+
+	/* Now the loop */
+	if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK))
+		return -EINPROGRESS;
+
+	if (wait_event_interruptible(*(sk->sk_sleep),
+				     (sk->sk_state != TCP_SYN_SENT)))
+		return -ERESTARTSYS;
+
+	if (sk->sk_state != TCP_ESTABLISHED) {
+		sock->state = SS_UNCONNECTED;
+		return sock_error(sk);	/* Always set at this point */
+	}
+
+	sock->state = SS_CONNECTED;
+
+	/* At this point, IrLMP has assigned our source address */
+	self->saddr = irttp_get_saddr(self->tsap);
+
+	return 0;
+}
+
+static struct proto irda_proto = {
+	.name	  = "IRDA",
+	.owner	  = THIS_MODULE,
+	.obj_size = sizeof(struct irda_sock),
+};
+
+/*
+ * Function irda_create (sock, protocol)
+ *
+ *    Create IrDA socket
+ *
+ */
+static int irda_create(struct socket *sock, int protocol)
+{
+	struct sock *sk;
+	struct irda_sock *self;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Check for valid socket type */
+	switch (sock->type) {
+	case SOCK_STREAM:     /* For TTP connections with SAR disabled */
+	case SOCK_SEQPACKET:  /* For TTP connections with SAR enabled */
+	case SOCK_DGRAM:      /* For TTP Unitdata or LMP Ultra transfers */
+		break;
+	default:
+		return -ESOCKTNOSUPPORT;
+	}
+
+	/* Allocate networking socket */
+	sk = sk_alloc(PF_IRDA, GFP_ATOMIC, &irda_proto, 1);
+	if (sk == NULL)
+		return -ENOMEM;
+
+	self = irda_sk(sk);
+	IRDA_DEBUG(2, "%s() : self is %p\n", __FUNCTION__, self);
+
+	init_waitqueue_head(&self->query_wait);
+
+	/* Initialise networking socket struct */
+	sock_init_data(sock, sk);	/* Note : set sk->sk_refcnt to 1 */
+	sk->sk_family = PF_IRDA;
+	sk->sk_protocol = protocol;
+
+	switch (sock->type) {
+	case SOCK_STREAM:
+		sock->ops = &irda_stream_ops;
+		self->max_sdu_size_rx = TTP_SAR_DISABLE;
+		break;
+	case SOCK_SEQPACKET:
+		sock->ops = &irda_seqpacket_ops;
+		self->max_sdu_size_rx = TTP_SAR_UNBOUND;
+		break;
+	case SOCK_DGRAM:
+		switch (protocol) {
+#ifdef CONFIG_IRDA_ULTRA
+		case IRDAPROTO_ULTRA:
+			sock->ops = &irda_ultra_ops;
+			/* Initialise now, because we may send on unbound
+			 * sockets. Jean II */
+			self->max_data_size = ULTRA_MAX_DATA - LMP_PID_HEADER;
+			self->max_header_size = IRDA_MAX_HEADER + LMP_PID_HEADER;
+			break;
+#endif /* CONFIG_IRDA_ULTRA */
+		case IRDAPROTO_UNITDATA:
+			sock->ops = &irda_dgram_ops;
+			/* We let Unitdata conn. be like seqpack conn. */
+			self->max_sdu_size_rx = TTP_SAR_UNBOUND;
+			break;
+		default:
+			IRDA_ERROR("%s: protocol not supported!\n",
+				   __FUNCTION__);
+			return -ESOCKTNOSUPPORT;
+		}
+		break;
+	default:
+		return -ESOCKTNOSUPPORT;
+	}
+
+	/* Register as a client with IrLMP */
+	self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
+	self->mask.word = 0xffff;
+	self->rx_flow = self->tx_flow = FLOW_START;
+	self->nslots = DISCOVERY_DEFAULT_SLOTS;
+	self->daddr = DEV_ADDR_ANY;	/* Until we get connected */
+	self->saddr = 0x0;		/* so IrLMP assign us any link */
+	return 0;
+}
+
+/*
+ * Function irda_destroy_socket (self)
+ *
+ *    Destroy socket
+ *
+ */
+static void irda_destroy_socket(struct irda_sock *self)
+{
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	IRDA_ASSERT(self != NULL, return;);
+
+	/* Unregister with IrLMP */
+	irlmp_unregister_client(self->ckey);
+	irlmp_unregister_service(self->skey);
+
+	/* Unregister with LM-IAS */
+	if (self->ias_obj) {
+		irias_delete_object(self->ias_obj);
+		self->ias_obj = NULL;
+	}
+
+	if (self->iriap) {
+		iriap_close(self->iriap);
+		self->iriap = NULL;
+	}
+
+	if (self->tsap) {
+		irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+		irttp_close_tsap(self->tsap);
+		self->tsap = NULL;
+	}
+#ifdef CONFIG_IRDA_ULTRA
+	if (self->lsap) {
+		irlmp_close_lsap(self->lsap);
+		self->lsap = NULL;
+	}
+#endif /* CONFIG_IRDA_ULTRA */
+}
+
+/*
+ * Function irda_release (sock)
+ */
+static int irda_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+        if (sk == NULL)
+		return 0;
+
+	sk->sk_state       = TCP_CLOSE;
+	sk->sk_shutdown   |= SEND_SHUTDOWN;
+	sk->sk_state_change(sk);
+
+	/* Destroy IrDA socket */
+	irda_destroy_socket(irda_sk(sk));
+
+	sock_orphan(sk);
+	sock->sk   = NULL;
+
+	/* Purge queues (see sock_init_data()) */
+	skb_queue_purge(&sk->sk_receive_queue);
+
+	/* Destroy networking socket if we are the last reference on it,
+	 * i.e. if(sk->sk_refcnt == 0) -> sk_free(sk) */
+	sock_put(sk);
+
+	/* Notes on socket locking and deallocation... - Jean II
+	 * In theory we should put pairs of sock_hold() / sock_put() to
+	 * prevent the socket to be destroyed whenever there is an
+	 * outstanding request or outstanding incoming packet or event.
+	 *
+	 * 1) This may include IAS request, both in connect and getsockopt.
+	 * Unfortunately, the situation is a bit more messy than it looks,
+	 * because we close iriap and kfree(self) above.
+	 *
+	 * 2) This may include selective discovery in getsockopt.
+	 * Same stuff as above, irlmp registration and self are gone.
+	 *
+	 * Probably 1 and 2 may not matter, because it's all triggered
+	 * by a process and the socket layer already prevent the
+	 * socket to go away while a process is holding it, through
+	 * sockfd_put() and fput()...
+	 *
+	 * 3) This may include deferred TSAP closure. In particular,
+	 * we may receive a late irda_disconnect_indication()
+	 * Fortunately, (tsap_cb *)->close_pend should protect us
+	 * from that.
+	 *
+	 * I did some testing on SMP, and it looks solid. And the socket
+	 * memory leak is now gone... - Jean II
+	 */
+
+        return 0;
+}
+
+/*
+ * Function irda_sendmsg (iocb, sock, msg, len)
+ *
+ *    Send message down to TinyTP. This function is used for both STREAM and
+ *    SEQPACK services. This is possible since it forces the client to
+ *    fragment the message if necessary
+ */
+static int irda_sendmsg(struct kiocb *iocb, struct socket *sock,
+			struct msghdr *msg, size_t len)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self;
+	struct sk_buff *skb;
+	unsigned char *asmptr;
+	int err;
+
+	IRDA_DEBUG(4, "%s(), len=%zd\n", __FUNCTION__, len);
+
+	/* Note : socket.c set MSG_EOR on SEQPACKET sockets */
+	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT))
+		return -EINVAL;
+
+	if (sk->sk_shutdown & SEND_SHUTDOWN) {
+		send_sig(SIGPIPE, current, 0);
+		return -EPIPE;
+	}
+
+	if (sk->sk_state != TCP_ESTABLISHED)
+		return -ENOTCONN;
+
+	self = irda_sk(sk);
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	/* Check if IrTTP is wants us to slow down */
+
+	if (wait_event_interruptible(*(sk->sk_sleep),
+	    (self->tx_flow != FLOW_STOP  ||  sk->sk_state != TCP_ESTABLISHED)))
+		return -ERESTARTSYS;
+
+	/* Check if we are still connected */
+	if (sk->sk_state != TCP_ESTABLISHED)
+		return -ENOTCONN;
+
+	/* Check that we don't send out to big frames */
+	if (len > self->max_data_size) {
+		IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n",
+			   __FUNCTION__, len, self->max_data_size);
+		len = self->max_data_size;
+	}
+
+	skb = sock_alloc_send_skb(sk, len + self->max_header_size + 16, 
+				  msg->msg_flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return -ENOBUFS;
+
+	skb_reserve(skb, self->max_header_size + 16);
+
+	asmptr = skb->h.raw = skb_put(skb, len);
+	err = memcpy_fromiovec(asmptr, msg->msg_iov, len);
+	if (err) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	/*
+	 * Just send the message to TinyTP, and let it deal with possible
+	 * errors. No need to duplicate all that here
+	 */
+	err = irttp_data_request(self->tsap, skb);
+	if (err) {
+		IRDA_DEBUG(0, "%s(), err=%d\n", __FUNCTION__, err);
+		return err;
+	}
+	/* Tell client how much data we actually sent */
+	return len;
+}
+
+/*
+ * Function irda_recvmsg_dgram (iocb, sock, msg, size, flags)
+ *
+ *    Try to receive message and copy it to user. The frame is discarded
+ *    after being read, regardless of how much the user actually read
+ */
+static int irda_recvmsg_dgram(struct kiocb *iocb, struct socket *sock,
+			      struct msghdr *msg, size_t size, int flags)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+	struct sk_buff *skb;
+	size_t copied;
+	int err;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
+				flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return err;
+
+	skb->h.raw = skb->data;
+	copied     = skb->len;
+
+	if (copied > size) {
+		IRDA_DEBUG(2, "%s(), Received truncated frame (%zd < %zd)!\n",
+			   __FUNCTION__, copied, size);
+		copied = size;
+		msg->msg_flags |= MSG_TRUNC;
+	}
+	skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+
+	skb_free_datagram(sk, skb);
+
+	/*
+	 *  Check if we have previously stopped IrTTP and we know
+	 *  have more free space in our rx_queue. If so tell IrTTP
+	 *  to start delivering frames again before our rx_queue gets
+	 *  empty
+	 */
+	if (self->rx_flow == FLOW_STOP) {
+		if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) {
+			IRDA_DEBUG(2, "%s(), Starting IrTTP\n", __FUNCTION__);
+			self->rx_flow = FLOW_START;
+			irttp_flow_request(self->tsap, FLOW_START);
+		}
+	}
+
+	return copied;
+}
+
+/*
+ * Function irda_recvmsg_stream (iocb, sock, msg, size, flags)
+ */
+static int irda_recvmsg_stream(struct kiocb *iocb, struct socket *sock,
+			       struct msghdr *msg, size_t size, int flags)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+	int noblock = flags & MSG_DONTWAIT;
+	size_t copied = 0;
+	int target = 1;
+	DECLARE_WAITQUEUE(waitq, current);
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	if (sock->flags & __SO_ACCEPTCON)
+		return(-EINVAL);
+
+	if (flags & MSG_OOB)
+		return -EOPNOTSUPP;
+
+	if (flags & MSG_WAITALL)
+		target = size;
+
+	msg->msg_namelen = 0;
+
+	do {
+		int chunk;
+		struct sk_buff *skb = skb_dequeue(&sk->sk_receive_queue);
+
+		if (skb==NULL) {
+			int ret = 0;
+
+			if (copied >= target)
+				break;
+
+			/* The following code is a cut'n'paste of the
+			 * wait_event_interruptible() macro.
+			 * We don't us the macro because the test condition
+			 * is messy. - Jean II */
+			set_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
+			add_wait_queue(sk->sk_sleep, &waitq);
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			/*
+			 *	POSIX 1003.1g mandates this order.
+			 */
+			if (sk->sk_err)
+				ret = sock_error(sk);
+			else if (sk->sk_shutdown & RCV_SHUTDOWN)
+				;
+			else if (noblock)
+				ret = -EAGAIN;
+			else if (signal_pending(current))
+				ret = -ERESTARTSYS;
+			else if (skb_peek(&sk->sk_receive_queue) == NULL)
+				/* Wait process until data arrives */
+				schedule();
+
+			current->state = TASK_RUNNING;
+			remove_wait_queue(sk->sk_sleep, &waitq);
+			clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
+
+			if(ret)
+				return(ret);
+			if (sk->sk_shutdown & RCV_SHUTDOWN)
+				break;
+
+			continue;
+		}
+
+		chunk = min_t(unsigned int, skb->len, size);
+		if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
+			skb_queue_head(&sk->sk_receive_queue, skb);
+			if (copied == 0)
+				copied = -EFAULT;
+			break;
+		}
+		copied += chunk;
+		size -= chunk;
+
+		/* Mark read part of skb as used */
+		if (!(flags & MSG_PEEK)) {
+			skb_pull(skb, chunk);
+
+			/* put the skb back if we didn't use it up.. */
+			if (skb->len) {
+				IRDA_DEBUG(1, "%s(), back on q!\n",
+					   __FUNCTION__);
+				skb_queue_head(&sk->sk_receive_queue, skb);
+				break;
+			}
+
+			kfree_skb(skb);
+		} else {
+			IRDA_DEBUG(0, "%s() questionable!?\n", __FUNCTION__);
+
+			/* put message back and return */
+			skb_queue_head(&sk->sk_receive_queue, skb);
+			break;
+		}
+	} while (size);
+
+	/*
+	 *  Check if we have previously stopped IrTTP and we know
+	 *  have more free space in our rx_queue. If so tell IrTTP
+	 *  to start delivering frames again before our rx_queue gets
+	 *  empty
+	 */
+	if (self->rx_flow == FLOW_STOP) {
+		if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) {
+			IRDA_DEBUG(2, "%s(), Starting IrTTP\n", __FUNCTION__);
+			self->rx_flow = FLOW_START;
+			irttp_flow_request(self->tsap, FLOW_START);
+		}
+	}
+
+	return copied;
+}
+
+/*
+ * Function irda_sendmsg_dgram (iocb, sock, msg, len)
+ *
+ *    Send message down to TinyTP for the unreliable sequenced
+ *    packet service...
+ *
+ */
+static int irda_sendmsg_dgram(struct kiocb *iocb, struct socket *sock,
+			      struct msghdr *msg, size_t len)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self;
+	struct sk_buff *skb;
+	unsigned char *asmptr;
+	int err;
+
+	IRDA_DEBUG(4, "%s(), len=%zd\n", __FUNCTION__, len);
+
+	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
+		return -EINVAL;
+
+	if (sk->sk_shutdown & SEND_SHUTDOWN) {
+		send_sig(SIGPIPE, current, 0);
+		return -EPIPE;
+	}
+
+	if (sk->sk_state != TCP_ESTABLISHED)
+		return -ENOTCONN;
+
+	self = irda_sk(sk);
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	/*
+	 * Check that we don't send out to big frames. This is an unreliable
+	 * service, so we have no fragmentation and no coalescence
+	 */
+	if (len > self->max_data_size) {
+		IRDA_DEBUG(0, "%s(), Warning to much data! "
+			   "Chopping frame from %zd to %d bytes!\n",
+			   __FUNCTION__, len, self->max_data_size);
+		len = self->max_data_size;
+	}
+
+	skb = sock_alloc_send_skb(sk, len + self->max_header_size,
+				  msg->msg_flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return -ENOBUFS;
+
+	skb_reserve(skb, self->max_header_size);
+
+	IRDA_DEBUG(4, "%s(), appending user data\n", __FUNCTION__);
+	asmptr = skb->h.raw = skb_put(skb, len);
+	err = memcpy_fromiovec(asmptr, msg->msg_iov, len);
+	if (err) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	/*
+	 * Just send the message to TinyTP, and let it deal with possible
+	 * errors. No need to duplicate all that here
+	 */
+	err = irttp_udata_request(self->tsap, skb);
+	if (err) {
+		IRDA_DEBUG(0, "%s(), err=%d\n", __FUNCTION__, err);
+		return err;
+	}
+	return len;
+}
+
+/*
+ * Function irda_sendmsg_ultra (iocb, sock, msg, len)
+ *
+ *    Send message down to IrLMP for the unreliable Ultra
+ *    packet service...
+ */
+#ifdef CONFIG_IRDA_ULTRA
+static int irda_sendmsg_ultra(struct kiocb *iocb, struct socket *sock,
+			      struct msghdr *msg, size_t len)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self;
+	__u8 pid = 0;
+	int bound = 0;
+	struct sk_buff *skb;
+	unsigned char *asmptr;
+	int err;
+
+	IRDA_DEBUG(4, "%s(), len=%zd\n", __FUNCTION__, len);
+
+	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
+		return -EINVAL;
+
+	if (sk->sk_shutdown & SEND_SHUTDOWN) {
+		send_sig(SIGPIPE, current, 0);
+		return -EPIPE;
+	}
+
+	self = irda_sk(sk);
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	/* Check if an address was specified with sendto. Jean II */
+	if (msg->msg_name) {
+		struct sockaddr_irda *addr = (struct sockaddr_irda *) msg->msg_name;
+		/* Check address, extract pid. Jean II */
+		if (msg->msg_namelen < sizeof(*addr))
+			return -EINVAL;
+		if (addr->sir_family != AF_IRDA)
+			return -EINVAL;
+
+		pid = addr->sir_lsap_sel;
+		if (pid & 0x80) {
+			IRDA_DEBUG(0, "%s(), extension in PID not supp!\n", __FUNCTION__);
+			return -EOPNOTSUPP;
+		}
+	} else {
+		/* Check that the socket is properly bound to an Ultra
+		 * port. Jean II */
+		if ((self->lsap == NULL) ||
+		    (sk->sk_state != TCP_ESTABLISHED)) {
+			IRDA_DEBUG(0, "%s(), socket not bound to Ultra PID.\n",
+				   __FUNCTION__);
+			return -ENOTCONN;
+		}
+		/* Use PID from socket */
+		bound = 1;
+	}
+
+	/*
+	 * Check that we don't send out to big frames. This is an unreliable
+	 * service, so we have no fragmentation and no coalescence
+	 */
+	if (len > self->max_data_size) {
+		IRDA_DEBUG(0, "%s(), Warning to much data! "
+			   "Chopping frame from %zd to %d bytes!\n",
+			   __FUNCTION__, len, self->max_data_size);
+		len = self->max_data_size;
+	}
+
+	skb = sock_alloc_send_skb(sk, len + self->max_header_size,
+				  msg->msg_flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return -ENOBUFS;
+
+	skb_reserve(skb, self->max_header_size);
+
+	IRDA_DEBUG(4, "%s(), appending user data\n", __FUNCTION__);
+	asmptr = skb->h.raw = skb_put(skb, len);
+	err = memcpy_fromiovec(asmptr, msg->msg_iov, len);
+	if (err) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	err = irlmp_connless_data_request((bound ? self->lsap : NULL),
+					  skb, pid);
+	if (err) {
+		IRDA_DEBUG(0, "%s(), err=%d\n", __FUNCTION__, err);
+		return err;
+	}
+	return len;
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irda_shutdown (sk, how)
+ */
+static int irda_shutdown(struct socket *sock, int how)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	IRDA_DEBUG(1, "%s(%p)\n", __FUNCTION__, self);
+
+	sk->sk_state       = TCP_CLOSE;
+	sk->sk_shutdown   |= SEND_SHUTDOWN;
+	sk->sk_state_change(sk);
+
+	if (self->iriap) {
+		iriap_close(self->iriap);
+		self->iriap = NULL;
+	}
+
+	if (self->tsap) {
+		irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+		irttp_close_tsap(self->tsap);
+		self->tsap = NULL;
+	}
+
+	/* A few cleanup so the socket look as good as new... */
+	self->rx_flow = self->tx_flow = FLOW_START;	/* needed ??? */
+	self->daddr = DEV_ADDR_ANY;	/* Until we get re-connected */
+	self->saddr = 0x0;		/* so IrLMP assign us any link */
+
+        return 0;
+}
+
+/*
+ * Function irda_poll (file, sock, wait)
+ */
+static unsigned int irda_poll(struct file * file, struct socket *sock,
+			      poll_table *wait)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+	unsigned int mask;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	poll_wait(file, sk->sk_sleep, wait);
+	mask = 0;
+
+	/* Exceptional events? */
+	if (sk->sk_err)
+		mask |= POLLERR;
+	if (sk->sk_shutdown & RCV_SHUTDOWN) {
+		IRDA_DEBUG(0, "%s(), POLLHUP\n", __FUNCTION__);
+		mask |= POLLHUP;
+	}
+
+	/* Readable? */
+	if (!skb_queue_empty(&sk->sk_receive_queue)) {
+		IRDA_DEBUG(4, "Socket is readable\n");
+		mask |= POLLIN | POLLRDNORM;
+	}
+
+	/* Connection-based need to check for termination and startup */
+	switch (sk->sk_type) {
+	case SOCK_STREAM:
+		if (sk->sk_state == TCP_CLOSE) {
+			IRDA_DEBUG(0, "%s(), POLLHUP\n", __FUNCTION__);
+			mask |= POLLHUP;
+		}
+
+		if (sk->sk_state == TCP_ESTABLISHED) {
+			if ((self->tx_flow == FLOW_START) &&
+			    sock_writeable(sk))
+			{
+				mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+			}
+		}
+		break;
+	case SOCK_SEQPACKET:
+		if ((self->tx_flow == FLOW_START) &&
+		    sock_writeable(sk))
+		{
+			mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+		}
+		break;
+	case SOCK_DGRAM:
+		if (sock_writeable(sk))
+			mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
+		break;
+	default:
+		break;
+	}
+	return mask;
+}
+
+/*
+ * Function irda_ioctl (sock, cmd, arg)
+ */
+static int irda_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+	struct sock *sk = sock->sk;
+
+	IRDA_DEBUG(4, "%s(), cmd=%#x\n", __FUNCTION__, cmd);
+
+	switch (cmd) {
+	case TIOCOUTQ: {
+		long amount;
+		amount = sk->sk_sndbuf - atomic_read(&sk->sk_wmem_alloc);
+		if (amount < 0)
+			amount = 0;
+		if (put_user(amount, (unsigned int __user *)arg))
+			return -EFAULT;
+		return 0;
+	}
+
+	case TIOCINQ: {
+		struct sk_buff *skb;
+		long amount = 0L;
+		/* These two are safe on a single CPU system as only user tasks fiddle here */
+		if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
+			amount = skb->len;
+		if (put_user(amount, (unsigned int __user *)arg))
+			return -EFAULT;
+		return 0;
+	}
+
+	case SIOCGSTAMP:
+		if (sk != NULL)
+			return sock_get_timestamp(sk, (struct timeval __user *)arg);
+		return -EINVAL;
+
+	case SIOCGIFADDR:
+	case SIOCSIFADDR:
+	case SIOCGIFDSTADDR:
+	case SIOCSIFDSTADDR:
+	case SIOCGIFBRDADDR:
+	case SIOCSIFBRDADDR:
+	case SIOCGIFNETMASK:
+	case SIOCSIFNETMASK:
+	case SIOCGIFMETRIC:
+	case SIOCSIFMETRIC:
+		return -EINVAL;
+	default:
+		IRDA_DEBUG(1, "%s(), doing device ioctl!\n", __FUNCTION__);
+		return dev_ioctl(cmd, (void __user *) arg);
+	}
+
+	/*NOTREACHED*/
+	return 0;
+}
+
+/*
+ * Function irda_setsockopt (sock, level, optname, optval, optlen)
+ *
+ *    Set some options for the socket
+ *
+ */
+static int irda_setsockopt(struct socket *sock, int level, int optname,
+			   char __user *optval, int optlen)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+	struct irda_ias_set    *ias_opt;
+	struct ias_object      *ias_obj;
+	struct ias_attrib *	ias_attr;	/* Attribute in IAS object */
+	int opt;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	if (level != SOL_IRLMP)
+		return -ENOPROTOOPT;
+
+	switch (optname) {
+	case IRLMP_IAS_SET:
+		/* The user want to add an attribute to an existing IAS object
+		 * (in the IAS database) or to create a new object with this
+		 * attribute.
+		 * We first query IAS to know if the object exist, and then
+		 * create the right attribute...
+		 */
+
+		if (optlen != sizeof(struct irda_ias_set))
+			return -EINVAL;
+
+		ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+		if (ias_opt == NULL)
+			return -ENOMEM;
+
+		/* Copy query to the driver. */
+		if (copy_from_user(ias_opt, optval, optlen)) {
+			kfree(ias_opt);
+			return -EFAULT;
+		}
+
+		/* Find the object we target.
+		 * If the user gives us an empty string, we use the object
+		 * associated with this socket. This will workaround
+		 * duplicated class name - Jean II */
+		if(ias_opt->irda_class_name[0] == '\0') {
+			if(self->ias_obj == NULL) {
+				kfree(ias_opt);
+				return -EINVAL;
+			}
+			ias_obj = self->ias_obj;
+		} else
+			ias_obj = irias_find_object(ias_opt->irda_class_name);
+
+		/* Only ROOT can mess with the global IAS database.
+		 * Users can only add attributes to the object associated
+		 * with the socket they own - Jean II */
+		if((!capable(CAP_NET_ADMIN)) &&
+		   ((ias_obj == NULL) || (ias_obj != self->ias_obj))) {
+			kfree(ias_opt);
+			return -EPERM;
+		}
+
+		/* If the object doesn't exist, create it */
+		if(ias_obj == (struct ias_object *) NULL) {
+			/* Create a new object */
+			ias_obj = irias_new_object(ias_opt->irda_class_name,
+						   jiffies);
+		}
+
+		/* Do we have the attribute already ? */
+		if(irias_find_attrib(ias_obj, ias_opt->irda_attrib_name)) {
+			kfree(ias_opt);
+			return -EINVAL;
+		}
+
+		/* Look at the type */
+		switch(ias_opt->irda_attrib_type) {
+		case IAS_INTEGER:
+			/* Add an integer attribute */
+			irias_add_integer_attrib(
+				ias_obj,
+				ias_opt->irda_attrib_name,
+				ias_opt->attribute.irda_attrib_int,
+				IAS_USER_ATTR);
+			break;
+		case IAS_OCT_SEQ:
+			/* Check length */
+			if(ias_opt->attribute.irda_attrib_octet_seq.len >
+			   IAS_MAX_OCTET_STRING) {
+				kfree(ias_opt);
+				return -EINVAL;
+			}
+			/* Add an octet sequence attribute */
+			irias_add_octseq_attrib(
+			      ias_obj,
+			      ias_opt->irda_attrib_name,
+			      ias_opt->attribute.irda_attrib_octet_seq.octet_seq,
+			      ias_opt->attribute.irda_attrib_octet_seq.len,
+			      IAS_USER_ATTR);
+			break;
+		case IAS_STRING:
+			/* Should check charset & co */
+			/* Check length */
+			/* The length is encoded in a __u8, and
+			 * IAS_MAX_STRING == 256, so there is no way
+			 * userspace can pass us a string too large.
+			 * Jean II */
+			/* NULL terminate the string (avoid troubles) */
+			ias_opt->attribute.irda_attrib_string.string[ias_opt->attribute.irda_attrib_string.len] = '\0';
+			/* Add a string attribute */
+			irias_add_string_attrib(
+				ias_obj,
+				ias_opt->irda_attrib_name,
+				ias_opt->attribute.irda_attrib_string.string,
+				IAS_USER_ATTR);
+			break;
+		default :
+			kfree(ias_opt);
+			return -EINVAL;
+		}
+		irias_insert_object(ias_obj);
+		kfree(ias_opt);
+		break;
+	case IRLMP_IAS_DEL:
+		/* The user want to delete an object from our local IAS
+		 * database. We just need to query the IAS, check is the
+		 * object is not owned by the kernel and delete it.
+		 */
+
+		if (optlen != sizeof(struct irda_ias_set))
+			return -EINVAL;
+
+		ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+		if (ias_opt == NULL)
+			return -ENOMEM;
+
+		/* Copy query to the driver. */
+		if (copy_from_user(ias_opt, optval, optlen)) {
+			kfree(ias_opt);
+			return -EFAULT;
+		}
+
+		/* Find the object we target.
+		 * If the user gives us an empty string, we use the object
+		 * associated with this socket. This will workaround
+		 * duplicated class name - Jean II */
+		if(ias_opt->irda_class_name[0] == '\0')
+			ias_obj = self->ias_obj;
+		else
+			ias_obj = irias_find_object(ias_opt->irda_class_name);
+		if(ias_obj == (struct ias_object *) NULL) {
+			kfree(ias_opt);
+			return -EINVAL;
+		}
+
+		/* Only ROOT can mess with the global IAS database.
+		 * Users can only del attributes from the object associated
+		 * with the socket they own - Jean II */
+		if((!capable(CAP_NET_ADMIN)) &&
+		   ((ias_obj == NULL) || (ias_obj != self->ias_obj))) {
+			kfree(ias_opt);
+			return -EPERM;
+		}
+
+		/* Find the attribute (in the object) we target */
+		ias_attr = irias_find_attrib(ias_obj,
+					     ias_opt->irda_attrib_name);
+		if(ias_attr == (struct ias_attrib *) NULL) {
+			kfree(ias_opt);
+			return -EINVAL;
+		}
+
+		/* Check is the user space own the object */
+		if(ias_attr->value->owner != IAS_USER_ATTR) {
+			IRDA_DEBUG(1, "%s(), attempting to delete a kernel attribute\n", __FUNCTION__);
+			kfree(ias_opt);
+			return -EPERM;
+		}
+
+		/* Remove the attribute (and maybe the object) */
+		irias_delete_attrib(ias_obj, ias_attr, 1);
+		kfree(ias_opt);
+		break;
+	case IRLMP_MAX_SDU_SIZE:
+		if (optlen < sizeof(int))
+			return -EINVAL;
+
+		if (get_user(opt, (int __user *)optval))
+			return -EFAULT;
+
+		/* Only possible for a seqpacket service (TTP with SAR) */
+		if (sk->sk_type != SOCK_SEQPACKET) {
+			IRDA_DEBUG(2, "%s(), setting max_sdu_size = %d\n",
+				   __FUNCTION__, opt);
+			self->max_sdu_size_rx = opt;
+		} else {
+			IRDA_WARNING("%s: not allowed to set MAXSDUSIZE for this socket type!\n",
+				     __FUNCTION__);
+			return -ENOPROTOOPT;
+		}
+		break;
+	case IRLMP_HINTS_SET:
+		if (optlen < sizeof(int))
+			return -EINVAL;
+
+		/* The input is really a (__u8 hints[2]), easier as an int */
+		if (get_user(opt, (int __user *)optval))
+			return -EFAULT;
+
+		/* Unregister any old registration */
+		if (self->skey)
+			irlmp_unregister_service(self->skey);
+
+		self->skey = irlmp_register_service((__u16) opt);
+		break;
+	case IRLMP_HINT_MASK_SET:
+		/* As opposed to the previous case which set the hint bits
+		 * that we advertise, this one set the filter we use when
+		 * making a discovery (nodes which don't match any hint
+		 * bit in the mask are not reported).
+		 */
+		if (optlen < sizeof(int))
+			return -EINVAL;
+
+		/* The input is really a (__u8 hints[2]), easier as an int */
+		if (get_user(opt, (int __user *)optval))
+			return -EFAULT;
+
+		/* Set the new hint mask */
+		self->mask.word = (__u16) opt;
+		/* Mask out extension bits */
+		self->mask.word &= 0x7f7f;
+		/* Check if no bits */
+		if(!self->mask.word)
+			self->mask.word = 0xFFFF;
+
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+	return 0;
+}
+
+/*
+ * Function irda_extract_ias_value(ias_opt, ias_value)
+ *
+ *    Translate internal IAS value structure to the user space representation
+ *
+ * The external representation of IAS values, as we exchange them with
+ * user space program is quite different from the internal representation,
+ * as stored in the IAS database (because we need a flat structure for
+ * crossing kernel boundary).
+ * This function transform the former in the latter. We also check
+ * that the value type is valid.
+ */
+static int irda_extract_ias_value(struct irda_ias_set *ias_opt,
+				  struct ias_value *ias_value)
+{
+	/* Look at the type */
+	switch (ias_value->type) {
+	case IAS_INTEGER:
+		/* Copy the integer */
+		ias_opt->attribute.irda_attrib_int = ias_value->t.integer;
+		break;
+	case IAS_OCT_SEQ:
+		/* Set length */
+		ias_opt->attribute.irda_attrib_octet_seq.len = ias_value->len;
+		/* Copy over */
+		memcpy(ias_opt->attribute.irda_attrib_octet_seq.octet_seq,
+		       ias_value->t.oct_seq, ias_value->len);
+		break;
+	case IAS_STRING:
+		/* Set length */
+		ias_opt->attribute.irda_attrib_string.len = ias_value->len;
+		ias_opt->attribute.irda_attrib_string.charset = ias_value->charset;
+		/* Copy over */
+		memcpy(ias_opt->attribute.irda_attrib_string.string,
+		       ias_value->t.string, ias_value->len);
+		/* NULL terminate the string (avoid troubles) */
+		ias_opt->attribute.irda_attrib_string.string[ias_value->len] = '\0';
+		break;
+	case IAS_MISSING:
+	default :
+		return -EINVAL;
+	}
+
+	/* Copy type over */
+	ias_opt->irda_attrib_type = ias_value->type;
+
+	return 0;
+}
+
+/*
+ * Function irda_getsockopt (sock, level, optname, optval, optlen)
+ */
+static int irda_getsockopt(struct socket *sock, int level, int optname,
+			   char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	struct irda_sock *self = irda_sk(sk);
+	struct irda_device_list list;
+	struct irda_device_info *discoveries;
+	struct irda_ias_set *	ias_opt;	/* IAS get/query params */
+	struct ias_object *	ias_obj;	/* Object in IAS */
+	struct ias_attrib *	ias_attr;	/* Attribute in IAS object */
+	int daddr = DEV_ADDR_ANY;	/* Dest address for IAS queries */
+	int val = 0;
+	int len = 0;
+	int err;
+	int offset, total;
+
+	IRDA_DEBUG(2, "%s(%p)\n", __FUNCTION__, self);
+
+	if (level != SOL_IRLMP)
+		return -ENOPROTOOPT;
+
+	if (get_user(len, optlen))
+		return -EFAULT;
+
+	if(len < 0)
+		return -EINVAL;
+
+	switch (optname) {
+	case IRLMP_ENUMDEVICES:
+		/* Ask lmp for the current discovery log */
+		discoveries = irlmp_get_discoveries(&list.len, self->mask.word,
+						    self->nslots);
+		/* Check if the we got some results */
+		if (discoveries == NULL)
+			return -EAGAIN;		/* Didn't find any devices */
+		err = 0;
+
+		/* Write total list length back to client */
+		if (copy_to_user(optval, &list,
+				 sizeof(struct irda_device_list) -
+				 sizeof(struct irda_device_info)))
+			err = -EFAULT;
+
+		/* Offset to first device entry */
+		offset = sizeof(struct irda_device_list) -
+			sizeof(struct irda_device_info);
+
+		/* Copy the list itself - watch for overflow */
+		if(list.len > 2048)
+		{
+			err = -EINVAL;
+			goto bed;
+		}
+		total = offset + (list.len * sizeof(struct irda_device_info));
+		if (total > len)
+			total = len;
+		if (copy_to_user(optval+offset, discoveries, total - offset))
+			err = -EFAULT;
+
+		/* Write total number of bytes used back to client */
+		if (put_user(total, optlen))
+			err = -EFAULT;
+bed:
+		/* Free up our buffer */
+		kfree(discoveries);
+		if (err)
+			return err;
+		break;
+	case IRLMP_MAX_SDU_SIZE:
+		val = self->max_data_size;
+		len = sizeof(int);
+		if (put_user(len, optlen))
+			return -EFAULT;
+
+		if (copy_to_user(optval, &val, len))
+			return -EFAULT;
+		break;
+	case IRLMP_IAS_GET:
+		/* The user want an object from our local IAS database.
+		 * We just need to query the IAS and return the value
+		 * that we found */
+
+		/* Check that the user has allocated the right space for us */
+		if (len != sizeof(struct irda_ias_set))
+			return -EINVAL;
+
+		ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+		if (ias_opt == NULL)
+			return -ENOMEM;
+
+		/* Copy query to the driver. */
+		if (copy_from_user(ias_opt, optval, len)) {
+			kfree(ias_opt);
+			return -EFAULT;
+		}
+
+		/* Find the object we target.
+		 * If the user gives us an empty string, we use the object
+		 * associated with this socket. This will workaround
+		 * duplicated class name - Jean II */
+		if(ias_opt->irda_class_name[0] == '\0')
+			ias_obj = self->ias_obj;
+		else
+			ias_obj = irias_find_object(ias_opt->irda_class_name);
+		if(ias_obj == (struct ias_object *) NULL) {
+			kfree(ias_opt);
+			return -EINVAL;
+		}
+
+		/* Find the attribute (in the object) we target */
+		ias_attr = irias_find_attrib(ias_obj,
+					     ias_opt->irda_attrib_name);
+		if(ias_attr == (struct ias_attrib *) NULL) {
+			kfree(ias_opt);
+			return -EINVAL;
+		}
+
+		/* Translate from internal to user structure */
+		err = irda_extract_ias_value(ias_opt, ias_attr->value);
+		if(err) {
+			kfree(ias_opt);
+			return err;
+		}
+
+		/* Copy reply to the user */
+		if (copy_to_user(optval, ias_opt,
+				 sizeof(struct irda_ias_set))) {
+			kfree(ias_opt);
+			return -EFAULT;
+		}
+		/* Note : don't need to put optlen, we checked it */
+		kfree(ias_opt);
+		break;
+	case IRLMP_IAS_QUERY:
+		/* The user want an object from a remote IAS database.
+		 * We need to use IAP to query the remote database and
+		 * then wait for the answer to come back. */
+
+		/* Check that the user has allocated the right space for us */
+		if (len != sizeof(struct irda_ias_set))
+			return -EINVAL;
+
+		ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC);
+		if (ias_opt == NULL)
+			return -ENOMEM;
+
+		/* Copy query to the driver. */
+		if (copy_from_user(ias_opt, optval, len)) {
+			kfree(ias_opt);
+			return -EFAULT;
+		}
+
+		/* At this point, there are two cases...
+		 * 1) the socket is connected - that's the easy case, we
+		 *	just query the device we are connected to...
+		 * 2) the socket is not connected - the user doesn't want
+		 *	to connect and/or may not have a valid service name
+		 *	(so can't create a fake connection). In this case,
+		 *	we assume that the user pass us a valid destination
+		 *	address in the requesting structure...
+		 */
+		if(self->daddr != DEV_ADDR_ANY) {
+			/* We are connected - reuse known daddr */
+			daddr = self->daddr;
+		} else {
+			/* We are not connected, we must specify a valid
+			 * destination address */
+			daddr = ias_opt->daddr;
+			if((!daddr) || (daddr == DEV_ADDR_ANY)) {
+				kfree(ias_opt);
+				return -EINVAL;
+			}
+		}
+
+		/* Check that we can proceed with IAP */
+		if (self->iriap) {
+			IRDA_WARNING("%s: busy with a previous query\n",
+				     __FUNCTION__);
+			kfree(ias_opt);
+			return -EBUSY;
+		}
+
+		self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+					 irda_getvalue_confirm);
+
+		if (self->iriap == NULL) {
+			kfree(ias_opt);
+			return -ENOMEM;
+		}
+
+		/* Treat unexpected wakeup as disconnect */
+		self->errno = -EHOSTUNREACH;
+
+		/* Query remote LM-IAS */
+		iriap_getvaluebyclass_request(self->iriap,
+					      self->saddr, daddr,
+					      ias_opt->irda_class_name,
+					      ias_opt->irda_attrib_name);
+
+		/* Wait for answer, if not yet finished (or failed) */
+		if (wait_event_interruptible(self->query_wait,
+					     (self->iriap == NULL))) {
+			/* pending request uses copy of ias_opt-content
+			 * we can free it regardless! */
+			kfree(ias_opt);
+			/* Treat signals as disconnect */
+			return -EHOSTUNREACH;
+		}
+
+		/* Check what happened */
+		if (self->errno)
+		{
+			kfree(ias_opt);
+			/* Requested object/attribute doesn't exist */
+			if((self->errno == IAS_CLASS_UNKNOWN) ||
+			   (self->errno == IAS_ATTRIB_UNKNOWN))
+				return (-EADDRNOTAVAIL);
+			else
+				return (-EHOSTUNREACH);
+		}
+
+		/* Translate from internal to user structure */
+		err = irda_extract_ias_value(ias_opt, self->ias_result);
+		if (self->ias_result)
+			irias_delete_value(self->ias_result);
+		if (err) {
+			kfree(ias_opt);
+			return err;
+		}
+
+		/* Copy reply to the user */
+		if (copy_to_user(optval, ias_opt,
+				 sizeof(struct irda_ias_set))) {
+			kfree(ias_opt);
+			return -EFAULT;
+		}
+		/* Note : don't need to put optlen, we checked it */
+		kfree(ias_opt);
+		break;
+	case IRLMP_WAITDEVICE:
+		/* This function is just another way of seeing life ;-)
+		 * IRLMP_ENUMDEVICES assumes that you have a static network,
+		 * and that you just want to pick one of the devices present.
+		 * On the other hand, in here we assume that no device is
+		 * present and that at some point in the future a device will
+		 * come into range. When this device arrive, we just wake
+		 * up the caller, so that he has time to connect to it before
+		 * the device goes away...
+		 * Note : once the node has been discovered for more than a
+		 * few second, it won't trigger this function, unless it
+		 * goes away and come back changes its hint bits (so we
+		 * might call it IRLMP_WAITNEWDEVICE).
+		 */
+
+		/* Check that the user is passing us an int */
+		if (len != sizeof(int))
+			return -EINVAL;
+		/* Get timeout in ms (max time we block the caller) */
+		if (get_user(val, (int __user *)optval))
+			return -EFAULT;
+
+		/* Tell IrLMP we want to be notified */
+		irlmp_update_client(self->ckey, self->mask.word,
+				    irda_selective_discovery_indication,
+				    NULL, (void *) self);
+
+		/* Do some discovery (and also return cached results) */
+		irlmp_discovery_request(self->nslots);
+
+		/* Wait until a node is discovered */
+		if (!self->cachedaddr) {
+			int ret = 0;
+
+			IRDA_DEBUG(1, "%s(), nothing discovered yet, going to sleep...\n", __FUNCTION__);
+
+			/* Set watchdog timer to expire in <val> ms. */
+			self->errno = 0;
+			init_timer(&self->watchdog);
+			self->watchdog.function = irda_discovery_timeout;
+			self->watchdog.data = (unsigned long) self;
+			self->watchdog.expires = jiffies + (val * HZ/1000);
+			add_timer(&(self->watchdog));
+
+			/* Wait for IR-LMP to call us back */
+			__wait_event_interruptible(self->query_wait,
+			      (self->cachedaddr != 0 || self->errno == -ETIME),
+						   ret);
+
+			/* If watchdog is still activated, kill it! */
+			if(timer_pending(&(self->watchdog)))
+				del_timer(&(self->watchdog));
+
+			IRDA_DEBUG(1, "%s(), ...waking up !\n", __FUNCTION__);
+
+			if (ret != 0)
+				return ret;
+		}
+		else
+			IRDA_DEBUG(1, "%s(), found immediately !\n",
+				   __FUNCTION__);
+
+		/* Tell IrLMP that we have been notified */
+		irlmp_update_client(self->ckey, self->mask.word,
+				    NULL, NULL, NULL);
+
+		/* Check if the we got some results */
+		if (!self->cachedaddr)
+			return -EAGAIN;		/* Didn't find any devices */
+		daddr = self->cachedaddr;
+		/* Cleanup */
+		self->cachedaddr = 0;
+
+		/* We return the daddr of the device that trigger the
+		 * wakeup. As irlmp pass us only the new devices, we
+		 * are sure that it's not an old device.
+		 * If the user want more details, he should query
+		 * the whole discovery log and pick one device...
+		 */
+		if (put_user(daddr, (int __user *)optval))
+			return -EFAULT;
+
+		break;
+	default:
+		return -ENOPROTOOPT;
+	}
+
+	return 0;
+}
+
+static struct net_proto_family irda_family_ops = {
+	.family = PF_IRDA,
+	.create = irda_create,
+	.owner	= THIS_MODULE,
+};
+
+static struct proto_ops SOCKOPS_WRAPPED(irda_stream_ops) = {
+	.family =	PF_IRDA,
+	.owner =	THIS_MODULE,
+	.release =	irda_release,
+	.bind =		irda_bind,
+	.connect =	irda_connect,
+	.socketpair =	sock_no_socketpair,
+	.accept =	irda_accept,
+	.getname =	irda_getname,
+	.poll =		irda_poll,
+	.ioctl =	irda_ioctl,
+	.listen =	irda_listen,
+	.shutdown =	irda_shutdown,
+	.setsockopt =	irda_setsockopt,
+	.getsockopt =	irda_getsockopt,
+	.sendmsg =	irda_sendmsg,
+	.recvmsg =	irda_recvmsg_stream,
+	.mmap =		sock_no_mmap,
+	.sendpage =	sock_no_sendpage,
+};
+
+static struct proto_ops SOCKOPS_WRAPPED(irda_seqpacket_ops) = {
+	.family =	PF_IRDA,
+	.owner =	THIS_MODULE,
+	.release =	irda_release,
+	.bind =		irda_bind,
+	.connect =	irda_connect,
+	.socketpair =	sock_no_socketpair,
+	.accept =	irda_accept,
+	.getname =	irda_getname,
+	.poll =		datagram_poll,
+	.ioctl =	irda_ioctl,
+	.listen =	irda_listen,
+	.shutdown =	irda_shutdown,
+	.setsockopt =	irda_setsockopt,
+	.getsockopt =	irda_getsockopt,
+	.sendmsg =	irda_sendmsg,
+	.recvmsg =	irda_recvmsg_dgram,
+	.mmap =		sock_no_mmap,
+	.sendpage =	sock_no_sendpage,
+};
+
+static struct proto_ops SOCKOPS_WRAPPED(irda_dgram_ops) = {
+	.family =	PF_IRDA,
+	.owner =	THIS_MODULE,
+	.release =	irda_release,
+	.bind =		irda_bind,
+	.connect =	irda_connect,
+	.socketpair =	sock_no_socketpair,
+	.accept =	irda_accept,
+	.getname =	irda_getname,
+	.poll =		datagram_poll,
+	.ioctl =	irda_ioctl,
+	.listen =	irda_listen,
+	.shutdown =	irda_shutdown,
+	.setsockopt =	irda_setsockopt,
+	.getsockopt =	irda_getsockopt,
+	.sendmsg =	irda_sendmsg_dgram,
+	.recvmsg =	irda_recvmsg_dgram,
+	.mmap =		sock_no_mmap,
+	.sendpage =	sock_no_sendpage,
+};
+
+#ifdef CONFIG_IRDA_ULTRA
+static struct proto_ops SOCKOPS_WRAPPED(irda_ultra_ops) = {
+	.family =	PF_IRDA,
+	.owner =	THIS_MODULE,
+	.release =	irda_release,
+	.bind =		irda_bind,
+	.connect =	sock_no_connect,
+	.socketpair =	sock_no_socketpair,
+	.accept =	sock_no_accept,
+	.getname =	irda_getname,
+	.poll =		datagram_poll,
+	.ioctl =	irda_ioctl,
+	.listen =	sock_no_listen,
+	.shutdown =	irda_shutdown,
+	.setsockopt =	irda_setsockopt,
+	.getsockopt =	irda_getsockopt,
+	.sendmsg =	irda_sendmsg_ultra,
+	.recvmsg =	irda_recvmsg_dgram,
+	.mmap =		sock_no_mmap,
+	.sendpage =	sock_no_sendpage,
+};
+#endif /* CONFIG_IRDA_ULTRA */
+
+#include <linux/smp_lock.h>
+SOCKOPS_WRAP(irda_stream, PF_IRDA);
+SOCKOPS_WRAP(irda_seqpacket, PF_IRDA);
+SOCKOPS_WRAP(irda_dgram, PF_IRDA);
+#ifdef CONFIG_IRDA_ULTRA
+SOCKOPS_WRAP(irda_ultra, PF_IRDA);
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irsock_init (pro)
+ *
+ *    Initialize IrDA protocol
+ *
+ */
+int __init irsock_init(void)
+{
+	int rc = proto_register(&irda_proto, 0);
+
+	if (rc == 0)
+		rc = sock_register(&irda_family_ops);
+
+	return rc;
+}
+
+/*
+ * Function irsock_cleanup (void)
+ *
+ *    Remove IrDA protocol
+ *
+ */
+void __exit irsock_cleanup(void)
+{
+	sock_unregister(PF_IRDA);
+	proto_unregister(&irda_proto);
+}
diff --git a/net/irda/discovery.c b/net/irda/discovery.c
new file mode 100644
index 00000000000..c4ba5fa1446
--- /dev/null
+++ b/net/irda/discovery.c
@@ -0,0 +1,419 @@
+/*********************************************************************
+ *                
+ * Filename:      discovery.c
+ * Version:       0.1
+ * Description:   Routines for handling discoveries at the IrLMP layer
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Apr  6 15:33:50 1999
+ * Modified at:   Sat Oct  9 17:11:31 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Modified at:   Fri May 28  3:11 CST 1999
+ * Modified by:   Horst von Brand <vonbrand@sleipnir.valparaiso.cl>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/string.h>
+#include <linux/socket.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+
+#include <net/irda/discovery.h>
+
+/*
+ * Function irlmp_add_discovery (cachelog, discovery)
+ *
+ *    Add a new discovery to the cachelog, and remove any old discoveries
+ *    from the same device
+ *
+ * Note : we try to preserve the time this device was *first* discovered
+ * (as opposed to the time of last discovery used for cleanup). This is
+ * used by clients waiting for discovery events to tell if the device
+ * discovered is "new" or just the same old one. They can't rely there
+ * on a binary flag (new/old), because not all discovery events are
+ * propagated to them, and they might not always listen, so they would
+ * miss some new devices popping up...
+ * Jean II
+ */
+void irlmp_add_discovery(hashbin_t *cachelog, discovery_t *new)
+{
+	discovery_t *discovery, *node;
+	unsigned long flags;
+
+	/* Set time of first discovery if node is new (see below) */
+	new->firststamp = new->timestamp;
+
+	spin_lock_irqsave(&cachelog->hb_spinlock, flags);
+
+	/* 
+	 * Remove all discoveries of devices that has previously been 
+	 * discovered on the same link with the same name (info), or the 
+	 * same daddr. We do this since some devices (mostly PDAs) change
+	 * their device address between every discovery.
+	 */
+	discovery = (discovery_t *) hashbin_get_first(cachelog);
+	while (discovery != NULL ) {
+		node = discovery;
+
+		/* Be sure to stay one item ahead */
+		discovery = (discovery_t *) hashbin_get_next(cachelog);
+
+		if ((node->data.saddr == new->data.saddr) &&
+		    ((node->data.daddr == new->data.daddr) || 
+		     (strcmp(node->data.info, new->data.info) == 0)))
+		{
+			/* This discovery is a previous discovery 
+			 * from the same device, so just remove it
+			 */
+			hashbin_remove_this(cachelog, (irda_queue_t *) node);
+			/* Check if hints bits are unchanged */
+			if(u16ho(node->data.hints) == u16ho(new->data.hints))
+				/* Set time of first discovery for this node */
+				new->firststamp = node->firststamp;
+			kfree(node);
+		}
+	}
+
+	/* Insert the new and updated version */
+	hashbin_insert(cachelog, (irda_queue_t *) new, new->data.daddr, NULL);
+
+	spin_unlock_irqrestore(&cachelog->hb_spinlock, flags);
+}
+
+/*
+ * Function irlmp_add_discovery_log (cachelog, log)
+ *
+ *    Merge a disovery log into the cachelog.
+ *
+ */
+void irlmp_add_discovery_log(hashbin_t *cachelog, hashbin_t *log)
+{
+	discovery_t *discovery;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/*
+	 *  If log is missing this means that IrLAP was unable to perform the
+	 *  discovery, so restart discovery again with just the half timeout
+	 *  of the normal one.
+	 */
+	/* Well... It means that there was nobody out there - Jean II */
+	if (log == NULL) {
+		/* irlmp_start_discovery_timer(irlmp, 150); */
+		return;
+	}
+
+	/*
+	 * Locking : we are the only owner of this discovery log, so
+	 * no need to lock it.
+	 * We just need to lock the global log in irlmp_add_discovery().
+	 */
+	discovery = (discovery_t *) hashbin_remove_first(log);
+	while (discovery != NULL) {
+		irlmp_add_discovery(cachelog, discovery);
+
+		discovery = (discovery_t *) hashbin_remove_first(log);
+	}
+	
+	/* Delete the now empty log */
+	hashbin_delete(log, (FREE_FUNC) kfree);
+}
+
+/*
+ * Function irlmp_expire_discoveries (log, saddr, force)
+ *
+ *    Go through all discoveries and expire all that has stayed too long
+ *
+ * Note : this assume that IrLAP won't change its saddr, which
+ * currently is a valid assumption...
+ */
+void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force)
+{
+	discovery_t *		discovery;
+	discovery_t *		curr;
+	unsigned long		flags;
+	discinfo_t *		buffer = NULL;
+	int			n;		/* Size of the full log */
+	int			i = 0;		/* How many we expired */
+
+	IRDA_ASSERT(log != NULL, return;);
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	spin_lock_irqsave(&log->hb_spinlock, flags);
+
+	discovery = (discovery_t *) hashbin_get_first(log);
+	while (discovery != NULL) {
+		/* Be sure to be one item ahead */
+		curr = discovery;
+		discovery = (discovery_t *) hashbin_get_next(log);
+
+		/* Test if it's time to expire this discovery */
+		if ((curr->data.saddr == saddr) &&
+		    (force ||
+		     ((jiffies - curr->timestamp) > DISCOVERY_EXPIRE_TIMEOUT)))
+		{
+			/* Create buffer as needed.
+			 * As this function get called a lot and most time
+			 * we don't have anything to put in the log (we are
+			 * quite picky), we can save a lot of overhead
+			 * by not calling kmalloc. Jean II */
+			if(buffer == NULL) {
+				/* Create the client specific buffer */
+				n = HASHBIN_GET_SIZE(log);
+				buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC);
+				if (buffer == NULL) {
+					spin_unlock_irqrestore(&log->hb_spinlock, flags);
+					return;
+				}
+
+			}
+
+			/* Copy discovery information */
+			memcpy(&(buffer[i]), &(curr->data),
+			       sizeof(discinfo_t));
+			i++;
+
+			/* Remove it from the log */
+			curr = hashbin_remove_this(log, (irda_queue_t *) curr);
+			if (curr)
+				kfree(curr);
+		}
+	}
+
+	/* Drop the spinlock before calling the higher layers, as
+	 * we can't guarantee they won't call us back and create a
+	 * deadlock. We will work on our own private data, so we
+	 * don't care to be interupted. - Jean II */
+	spin_unlock_irqrestore(&log->hb_spinlock, flags);
+
+	if(buffer == NULL)
+		return;
+
+	/* Tell IrLMP and registered clients about it */
+	irlmp_discovery_expiry(buffer, i);
+
+	/* Free up our buffer */
+	kfree(buffer);
+}
+
+#if 0
+/*
+ * Function irlmp_dump_discoveries (log)
+ *
+ *    Print out all discoveries in log
+ *
+ */
+void irlmp_dump_discoveries(hashbin_t *log)
+{
+	discovery_t *discovery;
+
+	IRDA_ASSERT(log != NULL, return;);
+
+	discovery = (discovery_t *) hashbin_get_first(log);
+	while (discovery != NULL) {
+		IRDA_DEBUG(0, "Discovery:\n");
+		IRDA_DEBUG(0, "  daddr=%08x\n", discovery->data.daddr);
+		IRDA_DEBUG(0, "  saddr=%08x\n", discovery->data.saddr); 
+		IRDA_DEBUG(0, "  nickname=%s\n", discovery->data.info);
+
+		discovery = (discovery_t *) hashbin_get_next(log);
+	}
+}
+#endif
+
+/*
+ * Function irlmp_copy_discoveries (log, pn, mask)
+ *
+ *    Copy all discoveries in a buffer
+ *
+ * This function implement a safe way for lmp clients to access the
+ * discovery log. The basic problem is that we don't want the log
+ * to change (add/remove) while the client is reading it. If the
+ * lmp client manipulate directly the hashbin, he is sure to get
+ * into troubles...
+ * The idea is that we copy all the current discovery log in a buffer
+ * which is specific to the client and pass this copy to him. As we
+ * do this operation with the spinlock grabbed, we are safe...
+ * Note : we don't want those clients to grab the spinlock, because
+ * we have no control on how long they will hold it...
+ * Note : we choose to copy the log in "struct irda_device_info" to
+ * save space...
+ * Note : the client must kfree himself() the log...
+ * Jean II
+ */
+struct irda_device_info *irlmp_copy_discoveries(hashbin_t *log, int *pn,
+						__u16 mask, int old_entries)
+{
+	discovery_t *		discovery;
+	unsigned long		flags;
+	discinfo_t *		buffer = NULL;
+	int			j_timeout = (sysctl_discovery_timeout * HZ);
+	int			n;		/* Size of the full log */
+	int			i = 0;		/* How many we picked */
+
+	IRDA_ASSERT(pn != NULL, return NULL;);
+	IRDA_ASSERT(log != NULL, return NULL;);
+
+	/* Save spin lock */
+	spin_lock_irqsave(&log->hb_spinlock, flags);
+
+	discovery = (discovery_t *) hashbin_get_first(log);
+	while (discovery != NULL) {
+		/* Mask out the ones we don't want :
+		 * We want to match the discovery mask, and to get only
+		 * the most recent one (unless we want old ones) */
+		if ((u16ho(discovery->data.hints) & mask) &&
+		    ((old_entries) ||
+		     ((jiffies - discovery->firststamp) < j_timeout)) ) {
+			/* Create buffer as needed.
+			 * As this function get called a lot and most time
+			 * we don't have anything to put in the log (we are
+			 * quite picky), we can save a lot of overhead
+			 * by not calling kmalloc. Jean II */
+			if(buffer == NULL) {
+				/* Create the client specific buffer */
+				n = HASHBIN_GET_SIZE(log);
+				buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC);
+				if (buffer == NULL) {
+					spin_unlock_irqrestore(&log->hb_spinlock, flags);
+					return NULL;
+				}
+
+			}
+
+			/* Copy discovery information */
+			memcpy(&(buffer[i]), &(discovery->data),
+			       sizeof(discinfo_t));
+			i++;
+		}
+		discovery = (discovery_t *) hashbin_get_next(log);
+	}
+
+	spin_unlock_irqrestore(&log->hb_spinlock, flags);
+
+	/* Get the actual number of device in the buffer and return */
+	*pn = i;
+	return(buffer);
+}
+
+#ifdef CONFIG_PROC_FS
+static inline discovery_t *discovery_seq_idx(loff_t pos)
+
+{
+	discovery_t *discovery;
+
+	for (discovery = (discovery_t *) hashbin_get_first(irlmp->cachelog); 
+	     discovery != NULL;
+	     discovery = (discovery_t *) hashbin_get_next(irlmp->cachelog)) {
+		if (pos-- == 0)
+			break;
+	}
+		
+	return discovery;
+}
+
+static void *discovery_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	spin_lock_irq(&irlmp->cachelog->hb_spinlock);
+        return *pos ? discovery_seq_idx(*pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *discovery_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+	return (v == SEQ_START_TOKEN) 
+		? (void *) hashbin_get_first(irlmp->cachelog)
+		: (void *) hashbin_get_next(irlmp->cachelog);
+}
+
+static void discovery_seq_stop(struct seq_file *seq, void *v)
+{
+	spin_unlock_irq(&irlmp->cachelog->hb_spinlock);
+}
+
+static int discovery_seq_show(struct seq_file *seq, void *v)
+{
+	if (v == SEQ_START_TOKEN)
+		seq_puts(seq, "IrLMP: Discovery log:\n\n");
+	else {
+		const discovery_t *discovery = v;
+
+		seq_printf(seq, "nickname: %s, hint: 0x%02x%02x", 
+			   discovery->data.info,
+			   discovery->data.hints[0], 
+			   discovery->data.hints[1]);
+#if 0
+		if ( discovery->data.hints[0] & HINT_PNP)
+			seq_puts(seq, "PnP Compatible ");
+		if ( discovery->data.hints[0] & HINT_PDA)
+			seq_puts(seq, "PDA/Palmtop ");
+		if ( discovery->data.hints[0] & HINT_COMPUTER)
+			seq_puts(seq, "Computer ");
+		if ( discovery->data.hints[0] & HINT_PRINTER)
+			seq_puts(seq, "Printer ");
+		if ( discovery->data.hints[0] & HINT_MODEM)
+			seq_puts(seq, "Modem ");
+		if ( discovery->data.hints[0] & HINT_FAX)
+			seq_puts(seq, "Fax ");
+		if ( discovery->data.hints[0] & HINT_LAN)
+			seq_puts(seq, "LAN Access ");
+		
+		if ( discovery->data.hints[1] & HINT_TELEPHONY)
+			seq_puts(seq, "Telephony ");
+		if ( discovery->data.hints[1] & HINT_FILE_SERVER)
+			seq_puts(seq, "File Server ");       
+		if ( discovery->data.hints[1] & HINT_COMM)
+			seq_puts(seq, "IrCOMM ");
+		if ( discovery->data.hints[1] & HINT_OBEX)
+			seq_puts(seq, "IrOBEX ");
+#endif		
+		seq_printf(seq,", saddr: 0x%08x, daddr: 0x%08x\n\n",
+			       discovery->data.saddr,
+			       discovery->data.daddr);
+		
+		seq_putc(seq, '\n');
+	}
+	return 0;
+}
+
+static struct seq_operations discovery_seq_ops = {
+	.start  = discovery_seq_start,
+	.next   = discovery_seq_next,
+	.stop   = discovery_seq_stop,
+	.show   = discovery_seq_show,
+};
+
+static int discovery_seq_open(struct inode *inode, struct file *file)
+{
+	IRDA_ASSERT(irlmp != NULL, return -EINVAL;);
+
+	return seq_open(file, &discovery_seq_ops);
+}
+
+struct file_operations discovery_seq_fops = {
+	.owner		= THIS_MODULE,
+	.open           = discovery_seq_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release	= seq_release,
+};
+#endif
diff --git a/net/irda/ircomm/Kconfig b/net/irda/ircomm/Kconfig
new file mode 100644
index 00000000000..2d4c6b4a78d
--- /dev/null
+++ b/net/irda/ircomm/Kconfig
@@ -0,0 +1,12 @@
+config IRCOMM
+	tristate "IrCOMM protocol"
+	depends on IRDA
+	help
+	  Say Y here if you want to build support for the IrCOMM protocol.
+	  To compile it as modules, choose M here: the modules will be
+	  called ircomm and ircomm_tty.
+	  IrCOMM implements serial port emulation, and makes it possible to
+	  use all existing applications that understands TTY's with an
+	  infrared link.  Thus you should be able to use application like PPP,
+	  minicom and others.
+
diff --git a/net/irda/ircomm/Makefile b/net/irda/ircomm/Makefile
new file mode 100644
index 00000000000..48689458c08
--- /dev/null
+++ b/net/irda/ircomm/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the Linux IrDA IrCOMM protocol layer.
+#
+
+obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o
+
+ircomm-objs := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o
+ircomm-tty-objs := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o
diff --git a/net/irda/ircomm/ircomm_core.c b/net/irda/ircomm/ircomm_core.c
new file mode 100644
index 00000000000..28688197885
--- /dev/null
+++ b/net/irda/ircomm/ircomm_core.c
@@ -0,0 +1,587 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_core.c
+ * Version:       1.0
+ * Description:   IrCOMM service interface
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 20:37:34 1999
+ * Modified at:   Tue Dec 21 13:26:41 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irias_object.h>
+
+#include <net/irda/ircomm_event.h>
+#include <net/irda/ircomm_lmp.h>
+#include <net/irda/ircomm_ttp.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_core.h>
+
+static int __ircomm_close(struct ircomm_cb *self);
+static void ircomm_control_indication(struct ircomm_cb *self, 
+				      struct sk_buff *skb, int clen);
+
+#ifdef CONFIG_PROC_FS
+extern struct proc_dir_entry *proc_irda;
+static int ircomm_seq_open(struct inode *, struct file *);
+
+static struct file_operations ircomm_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open           = ircomm_seq_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release	= seq_release,
+};
+#endif /* CONFIG_PROC_FS */
+
+hashbin_t *ircomm = NULL;
+
+static int __init ircomm_init(void)
+{
+	ircomm = hashbin_new(HB_LOCK); 
+	if (ircomm == NULL) {
+		IRDA_ERROR("%s(), can't allocate hashbin!\n", __FUNCTION__);
+		return -ENOMEM;
+	}
+	
+#ifdef CONFIG_PROC_FS
+	{ struct proc_dir_entry *ent;
+	ent = create_proc_entry("ircomm", 0, proc_irda);
+	if (ent) 
+		ent->proc_fops = &ircomm_proc_fops;
+	}
+#endif /* CONFIG_PROC_FS */
+	
+	IRDA_MESSAGE("IrCOMM protocol (Dag Brattli)\n");
+		
+	return 0;
+}
+
+static void __exit ircomm_cleanup(void)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	hashbin_delete(ircomm, (FREE_FUNC) __ircomm_close);
+
+#ifdef CONFIG_PROC_FS
+	remove_proc_entry("ircomm", proc_irda);
+#endif /* CONFIG_PROC_FS */
+}
+
+/*
+ * Function ircomm_open (client_notify)
+ *
+ *    Start a new IrCOMM instance
+ *
+ */
+struct ircomm_cb *ircomm_open(notify_t *notify, __u8 service_type, int line)
+{
+	struct ircomm_cb *self = NULL;
+	int ret;
+
+	IRDA_DEBUG(2, "%s(), service_type=0x%02x\n", __FUNCTION__ ,
+		   service_type);
+
+	IRDA_ASSERT(ircomm != NULL, return NULL;);
+
+	self = kmalloc(sizeof(struct ircomm_cb), GFP_ATOMIC);
+	if (self == NULL)
+		return NULL;
+
+	memset(self, 0, sizeof(struct ircomm_cb));
+
+	self->notify = *notify;
+	self->magic = IRCOMM_MAGIC;
+
+	/* Check if we should use IrLMP or IrTTP */
+	if (service_type & IRCOMM_3_WIRE_RAW) {
+		self->flow_status = FLOW_START;
+		ret = ircomm_open_lsap(self);
+	} else
+		ret = ircomm_open_tsap(self);
+
+	if (ret < 0) {
+		kfree(self);
+		return NULL;
+	}
+
+	self->service_type = service_type;
+	self->line = line;
+
+	hashbin_insert(ircomm, (irda_queue_t *) self, line, NULL);
+
+	ircomm_next_state(self, IRCOMM_IDLE);	
+
+	return self;
+}
+
+EXPORT_SYMBOL(ircomm_open);
+
+/*
+ * Function ircomm_close_instance (self)
+ *
+ *    Remove IrCOMM instance
+ *
+ */
+static int __ircomm_close(struct ircomm_cb *self)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Disconnect link if any */
+	ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, NULL, NULL);
+
+	/* Remove TSAP */
+	if (self->tsap) {
+		irttp_close_tsap(self->tsap);
+		self->tsap = NULL;
+	}
+
+	/* Remove LSAP */
+	if (self->lsap) {
+		irlmp_close_lsap(self->lsap);
+		self->lsap = NULL;
+	}
+	self->magic = 0;
+
+	kfree(self);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_close (self)
+ *
+ *    Closes and removes the specified IrCOMM instance
+ *
+ */
+int ircomm_close(struct ircomm_cb *self)
+{
+	struct ircomm_cb *entry;
+
+	IRDA_ASSERT(self != NULL, return -EIO;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EIO;);
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	entry = hashbin_remove(ircomm, self->line, NULL);
+
+	IRDA_ASSERT(entry == self, return -1;);
+	
+        return __ircomm_close(self);
+}
+
+EXPORT_SYMBOL(ircomm_close);
+
+/*
+ * Function ircomm_connect_request (self, service_type)
+ *
+ *    Impl. of this function is differ from one of the reference. This
+ *    function does discovery as well as sending connect request
+ * 
+ */
+int ircomm_connect_request(struct ircomm_cb *self, __u8 dlsap_sel, 
+			   __u32 saddr, __u32 daddr, struct sk_buff *skb,
+			   __u8 service_type)
+{
+	struct ircomm_info info;
+	int ret;
+
+	IRDA_DEBUG(2 , "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+
+	self->service_type= service_type;
+
+	info.dlsap_sel = dlsap_sel;
+	info.saddr = saddr;
+	info.daddr = daddr;
+
+	ret = ircomm_do_event(self, IRCOMM_CONNECT_REQUEST, skb, &info);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(ircomm_connect_request);
+
+/*
+ * Function ircomm_connect_indication (self, qos, skb)
+ *
+ *    Notify user layer about the incoming connection
+ *
+ */
+void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+			       struct ircomm_info *info)
+{
+	int clen = 0;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Check if the packet contains data on the control channel */
+	if (skb->len > 0)
+		clen = skb->data[0];
+	
+	/* 
+	 * If there are any data hiding in the control channel, we must 
+	 * deliver it first. The side effect is that the control channel 
+	 * will be removed from the skb
+	 */
+	if (self->notify.connect_indication)
+		self->notify.connect_indication(self->notify.instance, self, 
+						info->qos, info->max_data_size,
+						info->max_header_size, skb);
+	else {
+		IRDA_DEBUG(0, "%s(), missing handler\n", __FUNCTION__ );
+	}
+}
+
+/*
+ * Function ircomm_connect_response (self, userdata, max_sdu_size)
+ *
+ *    User accepts connection
+ *
+ */
+int ircomm_connect_response(struct ircomm_cb *self, struct sk_buff *userdata)
+{
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	ret = ircomm_do_event(self, IRCOMM_CONNECT_RESPONSE, userdata, NULL);
+
+	return ret;
+}	
+
+EXPORT_SYMBOL(ircomm_connect_response);
+
+/*
+ * Function connect_confirm (self, skb)
+ *
+ *    Notify user layer that the link is now connected
+ *
+ */
+void ircomm_connect_confirm(struct ircomm_cb *self, struct sk_buff *skb,
+			    struct ircomm_info *info)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	if (self->notify.connect_confirm )
+		self->notify.connect_confirm(self->notify.instance,
+					     self, info->qos, 
+					     info->max_data_size,
+					     info->max_header_size, skb);
+	else {
+		IRDA_DEBUG(0, "%s(), missing handler\n", __FUNCTION__ );
+	}
+}
+
+/*
+ * Function ircomm_data_request (self, userdata)
+ *
+ *    Send IrCOMM data to peer device
+ *
+ */
+int ircomm_data_request(struct ircomm_cb *self, struct sk_buff *skb)
+{
+	int ret;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -EFAULT;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;);
+	IRDA_ASSERT(skb != NULL, return -EFAULT;);
+	
+	ret = ircomm_do_event(self, IRCOMM_DATA_REQUEST, skb, NULL);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(ircomm_data_request);
+
+/*
+ * Function ircomm_data_indication (self, skb)
+ *
+ *    Data arrived, so deliver it to user
+ *
+ */
+void ircomm_data_indication(struct ircomm_cb *self, struct sk_buff *skb)
+{	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(skb->len > 0, return;);
+
+	if (self->notify.data_indication)
+		self->notify.data_indication(self->notify.instance, self, skb);
+	else {
+		IRDA_DEBUG(0, "%s(), missing handler\n", __FUNCTION__ );
+	}
+}
+
+/*
+ * Function ircomm_process_data (self, skb)
+ *
+ *    Data arrived which may contain control channel data
+ *
+ */
+void ircomm_process_data(struct ircomm_cb *self, struct sk_buff *skb)
+{
+	int clen;
+
+	IRDA_ASSERT(skb->len > 0, return;);
+
+	clen = skb->data[0];
+
+	/* 
+	 * If there are any data hiding in the control channel, we must 
+	 * deliver it first. The side effect is that the control channel 
+	 * will be removed from the skb
+	 */
+	if (clen > 0)
+		ircomm_control_indication(self, skb, clen);
+
+	/* Remove control channel from data channel */
+	skb_pull(skb, clen+1);
+
+	if (skb->len)
+		ircomm_data_indication(self, skb);		
+	else {
+		IRDA_DEBUG(4, "%s(), data was control info only!\n",
+			   __FUNCTION__ );
+	}
+}
+
+/*
+ * Function ircomm_control_request (self, params)
+ *
+ *    Send control data to peer device
+ *
+ */
+int ircomm_control_request(struct ircomm_cb *self, struct sk_buff *skb)
+{
+	int ret;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -EFAULT;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;);
+	IRDA_ASSERT(skb != NULL, return -EFAULT;);
+	
+	ret = ircomm_do_event(self, IRCOMM_CONTROL_REQUEST, skb, NULL);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(ircomm_control_request);
+
+/*
+ * Function ircomm_control_indication (self, skb)
+ *
+ *    Data has arrived on the control channel
+ *
+ */
+static void ircomm_control_indication(struct ircomm_cb *self, 
+				      struct sk_buff *skb, int clen)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );	
+
+	/* Use udata for delivering data on the control channel */
+	if (self->notify.udata_indication) {
+		struct sk_buff *ctrl_skb;
+
+		/* We don't own the skb, so clone it */
+		ctrl_skb = skb_clone(skb, GFP_ATOMIC);
+		if (!ctrl_skb)
+			return;
+
+		/* Remove data channel from control channel */
+		skb_trim(ctrl_skb, clen+1);
+	
+		self->notify.udata_indication(self->notify.instance, self, 
+					      ctrl_skb);
+
+		/* Drop reference count -
+		 * see ircomm_tty_control_indication(). */
+		dev_kfree_skb(ctrl_skb);
+	} else {
+		IRDA_DEBUG(0, "%s(), missing handler\n", __FUNCTION__ );
+	}
+}
+
+/*
+ * Function ircomm_disconnect_request (self, userdata, priority)
+ *
+ *    User layer wants to disconnect the IrCOMM connection
+ *
+ */
+int ircomm_disconnect_request(struct ircomm_cb *self, struct sk_buff *userdata)
+{
+	struct ircomm_info info;
+	int ret;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+
+	ret = ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, userdata, 
+			      &info);
+	return ret;
+}
+
+EXPORT_SYMBOL(ircomm_disconnect_request);
+
+/*
+ * Function disconnect_indication (self, skb)
+ *
+ *    Tell user that the link has been disconnected
+ *
+ */
+void ircomm_disconnect_indication(struct ircomm_cb *self, struct sk_buff *skb,
+				  struct ircomm_info *info)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+       
+	IRDA_ASSERT(info != NULL, return;);
+
+	if (self->notify.disconnect_indication) {
+		self->notify.disconnect_indication(self->notify.instance, self,
+						   info->reason, skb);
+	} else {
+		IRDA_DEBUG(0, "%s(), missing handler\n", __FUNCTION__ );
+	}
+}
+
+/*
+ * Function ircomm_flow_request (self, flow)
+ *
+ *    
+ *
+ */
+void ircomm_flow_request(struct ircomm_cb *self, LOCAL_FLOW flow)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+	if (self->service_type == IRCOMM_3_WIRE_RAW)
+		return;
+
+	irttp_flow_request(self->tsap, flow);
+}
+
+EXPORT_SYMBOL(ircomm_flow_request);
+
+#ifdef CONFIG_PROC_FS
+static void *ircomm_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct ircomm_cb *self;
+	loff_t off = 0;
+
+	spin_lock_irq(&ircomm->hb_spinlock);
+
+	for (self = (struct ircomm_cb *) hashbin_get_first(ircomm);
+	     self != NULL;
+	     self = (struct ircomm_cb *) hashbin_get_next(ircomm)) {
+		if (off++ == *pos)
+			break;
+		
+	}
+	return self;
+}
+
+static void *ircomm_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+
+	return (void *) hashbin_get_next(ircomm);
+}
+
+static void ircomm_seq_stop(struct seq_file *seq, void *v)
+{
+	spin_unlock_irq(&ircomm->hb_spinlock);
+}
+
+static int ircomm_seq_show(struct seq_file *seq, void *v)
+{ 	
+	const struct ircomm_cb *self = v;
+
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EINVAL; );
+
+	if(self->line < 0x10)
+		seq_printf(seq, "ircomm%d", self->line);
+	else
+		seq_printf(seq, "irlpt%d", self->line - 0x10);
+
+	seq_printf(seq,
+		   " state: %s, slsap_sel: %#02x, dlsap_sel: %#02x, mode:",
+		   ircomm_state[ self->state],
+		   self->slsap_sel, self->dlsap_sel); 
+
+	if(self->service_type & IRCOMM_3_WIRE_RAW)
+		seq_printf(seq, " 3-wire-raw");
+	if(self->service_type & IRCOMM_3_WIRE)
+		seq_printf(seq, " 3-wire");
+	if(self->service_type & IRCOMM_9_WIRE)
+		seq_printf(seq, " 9-wire");
+	if(self->service_type & IRCOMM_CENTRONICS)
+		seq_printf(seq, " Centronics");
+	seq_putc(seq, '\n');
+
+	return 0;
+}
+
+static struct seq_operations ircomm_seq_ops = {
+	.start  = ircomm_seq_start,
+	.next   = ircomm_seq_next,
+	.stop   = ircomm_seq_stop,
+	.show   = ircomm_seq_show,
+};
+
+static int ircomm_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &ircomm_seq_ops);
+}
+#endif /* CONFIG_PROC_FS */
+
+MODULE_AUTHOR("Dag Brattli <dag@brattli.net>");
+MODULE_DESCRIPTION("IrCOMM protocol");
+MODULE_LICENSE("GPL");
+
+module_init(ircomm_init);
+module_exit(ircomm_cleanup);
diff --git a/net/irda/ircomm/ircomm_event.c b/net/irda/ircomm/ircomm_event.c
new file mode 100644
index 00000000000..01f4e801a1b
--- /dev/null
+++ b/net/irda/ircomm/ircomm_event.c
@@ -0,0 +1,251 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_event.c
+ * Version:       1.0
+ * Description:   IrCOMM layer state machine
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 20:33:11 1999
+ * Modified at:   Sun Dec 12 13:44:32 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irias_object.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_event.h>
+
+static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			     struct sk_buff *skb, struct ircomm_info *info);
+static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			      struct sk_buff *skb, struct ircomm_info *info);
+static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			      struct sk_buff *skb, struct ircomm_info *info);
+static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			     struct sk_buff *skb, struct ircomm_info *info);
+
+char *ircomm_state[] = {
+	"IRCOMM_IDLE",
+	"IRCOMM_WAITI",
+	"IRCOMM_WAITR",
+	"IRCOMM_CONN",
+};
+
+#ifdef CONFIG_IRDA_DEBUG
+static char *ircomm_event[] = {
+	"IRCOMM_CONNECT_REQUEST",
+        "IRCOMM_CONNECT_RESPONSE",
+        "IRCOMM_TTP_CONNECT_INDICATION",
+	"IRCOMM_LMP_CONNECT_INDICATION",
+        "IRCOMM_TTP_CONNECT_CONFIRM",
+	"IRCOMM_LMP_CONNECT_CONFIRM",
+
+        "IRCOMM_LMP_DISCONNECT_INDICATION",
+	"IRCOMM_TTP_DISCONNECT_INDICATION",
+        "IRCOMM_DISCONNECT_REQUEST",
+
+        "IRCOMM_TTP_DATA_INDICATION",
+	"IRCOMM_LMP_DATA_INDICATION",
+        "IRCOMM_DATA_REQUEST",
+        "IRCOMM_CONTROL_REQUEST",
+        "IRCOMM_CONTROL_INDICATION",
+};
+#endif /* CONFIG_IRDA_DEBUG */
+
+static int (*state[])(struct ircomm_cb *self, IRCOMM_EVENT event,
+		      struct sk_buff *skb, struct ircomm_info *info) = 
+{
+	ircomm_state_idle,
+	ircomm_state_waiti,
+	ircomm_state_waitr,
+	ircomm_state_conn,
+};
+
+/*
+ * Function ircomm_state_idle (self, event, skb)
+ *
+ *    IrCOMM is currently idle
+ *
+ */
+static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			     struct sk_buff *skb, struct ircomm_info *info)
+{
+	int ret = 0;
+
+	switch (event) {
+	case IRCOMM_CONNECT_REQUEST:
+		ircomm_next_state(self, IRCOMM_WAITI);		
+		ret = self->issue.connect_request(self, skb, info);
+		break;
+	case IRCOMM_TTP_CONNECT_INDICATION:
+	case IRCOMM_LMP_CONNECT_INDICATION:
+		ircomm_next_state(self, IRCOMM_WAITR);
+		ircomm_connect_indication(self, skb, info);
+		break;
+	default:
+		IRDA_DEBUG(4, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_state_waiti (self, event, skb)
+ *
+ *    The IrCOMM user has requested an IrCOMM connection to the remote 
+ *    device and is awaiting confirmation
+ */
+static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			      struct sk_buff *skb, struct ircomm_info *info)
+{
+	int ret = 0;
+
+	switch (event) {
+	case IRCOMM_TTP_CONNECT_CONFIRM:
+	case IRCOMM_LMP_CONNECT_CONFIRM:
+		ircomm_next_state(self, IRCOMM_CONN);
+		ircomm_connect_confirm(self, skb, info);
+		break;
+	case IRCOMM_TTP_DISCONNECT_INDICATION:
+	case IRCOMM_LMP_DISCONNECT_INDICATION:
+		ircomm_next_state(self, IRCOMM_IDLE);
+		ircomm_disconnect_indication(self, skb, info);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_state_waitr (self, event, skb)
+ *
+ *    IrCOMM has received an incoming connection request and is awaiting
+ *    response from the user
+ */
+static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			      struct sk_buff *skb, struct ircomm_info *info) 
+{
+	int ret = 0;
+
+	switch (event) {
+	case IRCOMM_CONNECT_RESPONSE:
+		ircomm_next_state(self, IRCOMM_CONN);
+		ret = self->issue.connect_response(self, skb);
+		break;
+	case IRCOMM_DISCONNECT_REQUEST:
+		ircomm_next_state(self, IRCOMM_IDLE);
+		ret = self->issue.disconnect_request(self, skb, info);
+		break;
+	case IRCOMM_TTP_DISCONNECT_INDICATION:
+	case IRCOMM_LMP_DISCONNECT_INDICATION:
+		ircomm_next_state(self, IRCOMM_IDLE);
+		ircomm_disconnect_indication(self, skb, info);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event = %s\n", __FUNCTION__ ,
+			   ircomm_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_state_conn (self, event, skb)
+ *
+ *    IrCOMM is connected to the peer IrCOMM device
+ *
+ */
+static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event, 
+			     struct sk_buff *skb, struct ircomm_info *info)
+{
+	int ret = 0;
+
+	switch (event) {
+	case IRCOMM_DATA_REQUEST:
+		ret = self->issue.data_request(self, skb, 0);
+		break;
+	case IRCOMM_TTP_DATA_INDICATION:
+		ircomm_process_data(self, skb);
+		break;
+	case IRCOMM_LMP_DATA_INDICATION:
+		ircomm_data_indication(self, skb);
+		break;
+	case IRCOMM_CONTROL_REQUEST:
+		/* Just send a separate frame for now */
+		ret = self->issue.data_request(self, skb, skb->len);
+		break;
+	case IRCOMM_TTP_DISCONNECT_INDICATION:
+	case IRCOMM_LMP_DISCONNECT_INDICATION:
+		ircomm_next_state(self, IRCOMM_IDLE);
+		ircomm_disconnect_indication(self, skb, info);
+		break;
+	case IRCOMM_DISCONNECT_REQUEST:
+		ircomm_next_state(self, IRCOMM_IDLE);
+		ret = self->issue.disconnect_request(self, skb, info);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event = %s\n", __FUNCTION__ ,
+			   ircomm_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_do_event (self, event, skb)
+ *
+ *    Process event
+ *
+ */
+int ircomm_do_event(struct ircomm_cb *self, IRCOMM_EVENT event,
+		    struct sk_buff *skb, struct ircomm_info *info) 
+{
+	IRDA_DEBUG(4, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_state[self->state], ircomm_event[event]);
+
+	return (*state[self->state])(self, event, skb, info);
+}
+
+/*
+ * Function ircomm_next_state (self, state)
+ *
+ *    Switch state
+ *
+ */
+void ircomm_next_state(struct ircomm_cb *self, IRCOMM_STATE state)
+{
+	self->state = state;
+	
+	IRDA_DEBUG(4, "%s: next state=%s, service type=%d\n", __FUNCTION__ , 
+		   ircomm_state[self->state], self->service_type);
+}
diff --git a/net/irda/ircomm/ircomm_lmp.c b/net/irda/ircomm/ircomm_lmp.c
new file mode 100644
index 00000000000..d9097207aed
--- /dev/null
+++ b/net/irda/ircomm/ircomm_lmp.c
@@ -0,0 +1,372 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_lmp.c
+ * Version:       1.0
+ * Description:   Interface between IrCOMM and IrLMP
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 20:48:27 1999
+ * Modified at:   Sun Dec 12 13:44:17 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Sources:       Previous IrLPT work by Thomas Davis
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irda_device.h>	/* struct irda_skb_cb */
+
+#include <net/irda/ircomm_event.h>
+#include <net/irda/ircomm_lmp.h>
+
+
+/*
+ * Function ircomm_lmp_connect_request (self, userdata)
+ *
+ *    
+ *
+ */
+static int ircomm_lmp_connect_request(struct ircomm_cb *self, 
+				      struct sk_buff *userdata, 
+				      struct ircomm_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	/* Don't forget to refcount it - should be NULL anyway */
+	if(userdata)
+		skb_get(userdata);
+
+	ret = irlmp_connect_request(self->lsap, info->dlsap_sel,
+				    info->saddr, info->daddr, NULL, userdata); 
+	return ret;
+}	
+
+/*
+ * Function ircomm_lmp_connect_response (self, skb)
+ *
+ *    
+ *
+ */
+static int ircomm_lmp_connect_response(struct ircomm_cb *self,
+				       struct sk_buff *userdata)
+{
+	struct sk_buff *tx_skb;
+	int ret;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	
+	/* Any userdata supplied? */
+	if (userdata == NULL) {
+		tx_skb = dev_alloc_skb(64);
+		if (!tx_skb)
+			return -ENOMEM;
+
+		/* Reserve space for MUX and LAP header */
+		skb_reserve(tx_skb, LMP_MAX_HEADER);
+	} else {
+		/*  
+		 *  Check that the client has reserved enough space for 
+		 *  headers
+		 */
+		IRDA_ASSERT(skb_headroom(userdata) >= LMP_MAX_HEADER,
+			    return -1;);
+
+		/* Don't forget to refcount it - should be NULL anyway */
+		skb_get(userdata);
+		tx_skb = userdata;
+	}
+
+	ret = irlmp_connect_response(self->lsap, tx_skb);
+
+	return 0;
+}
+
+static int ircomm_lmp_disconnect_request(struct ircomm_cb *self, 
+					 struct sk_buff *userdata, 
+					 struct ircomm_info *info)
+{
+        struct sk_buff *tx_skb;
+	int ret;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+        if (!userdata) {
+		tx_skb = dev_alloc_skb(64);
+		if (!tx_skb)
+			return -ENOMEM;
+		
+		/*  Reserve space for MUX and LAP header */
+		skb_reserve(tx_skb, LMP_MAX_HEADER);		
+		userdata = tx_skb;
+	} else {
+		/* Don't forget to refcount it - should be NULL anyway */
+		skb_get(userdata);
+	}
+
+	ret = irlmp_disconnect_request(self->lsap, userdata);
+
+	return ret;
+}
+
+/*
+ * Function ircomm_lmp_flow_control (skb)
+ *
+ *    This function is called when a data frame we have sent to IrLAP has
+ *    been deallocated. We do this to make sure we don't flood IrLAP with 
+ *    frames, since we are not using the IrTTP flow control mechanism
+ */
+static void ircomm_lmp_flow_control(struct sk_buff *skb)
+{
+	struct irda_skb_cb *cb;
+	struct ircomm_cb *self;
+	int line;
+
+	IRDA_ASSERT(skb != NULL, return;);
+
+	cb = (struct irda_skb_cb *) skb->cb;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+ 
+        line = cb->line;
+
+	self = (struct ircomm_cb *) hashbin_lock_find(ircomm, line, NULL);
+        if (!self) {
+		IRDA_DEBUG(2, "%s(), didn't find myself\n", __FUNCTION__ );
+                return;
+	}
+
+        IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+	self->pkt_count--;
+
+        if ((self->pkt_count < 2) && (self->flow_status == FLOW_STOP)) {
+                IRDA_DEBUG(2, "%s(), asking TTY to start again!\n", __FUNCTION__ );
+                self->flow_status = FLOW_START;
+                if (self->notify.flow_indication)
+                        self->notify.flow_indication(self->notify.instance, 
+						     self, FLOW_START);
+        }
+}
+    
+/*
+ * Function ircomm_lmp_data_request (self, userdata)
+ *
+ *    Send data frame to peer device
+ *
+ */
+static int ircomm_lmp_data_request(struct ircomm_cb *self,
+				   struct sk_buff *skb, 
+				   int not_used)
+{
+	struct irda_skb_cb *cb;
+	int ret;
+
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	cb = (struct irda_skb_cb *) skb->cb;
+	
+        cb->line = self->line;
+
+	IRDA_DEBUG(4, "%s(), sending frame\n", __FUNCTION__ );
+
+	/* Don't forget to refcount it - see ircomm_tty_do_softint() */
+	skb_get(skb);
+
+	skb->destructor = ircomm_lmp_flow_control;
+
+        if ((self->pkt_count++ > 7) && (self->flow_status == FLOW_START)) {
+		IRDA_DEBUG(2, "%s(), asking TTY to slow down!\n", __FUNCTION__ );
+	        self->flow_status = FLOW_STOP;
+                if (self->notify.flow_indication)
+             	        self->notify.flow_indication(self->notify.instance, 
+				                     self, FLOW_STOP);
+        }
+	ret = irlmp_data_request(self->lsap, skb);
+	if (ret) {
+		IRDA_ERROR("%s(), failed\n", __FUNCTION__);
+		/* irlmp_data_request already free the packet */
+	}
+
+	return ret;
+}
+
+/*
+ * Function ircomm_lmp_data_indication (instance, sap, skb)
+ *
+ *    Incoming data which we must deliver to the state machine, to check
+ *    we are still connected.
+ */
+static int ircomm_lmp_data_indication(void *instance, void *sap,
+				      struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+	
+	ircomm_do_event(self, IRCOMM_LMP_DATA_INDICATION, skb, NULL);
+
+	/* Drop reference count - see ircomm_tty_data_indication(). */
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_lmp_connect_confirm (instance, sap, qos, max_sdu_size, 
+ *                                       max_header_size, skb)
+ *
+ *    Connection has been confirmed by peer device
+ *
+ */
+static void ircomm_lmp_connect_confirm(void *instance, void *sap,
+				       struct qos_info *qos, 
+				       __u32 max_seg_size, 
+				       __u8 max_header_size,
+				       struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+	struct ircomm_info info;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(qos != NULL, return;);
+
+	info.max_data_size = max_seg_size;
+	info.max_header_size = max_header_size;
+	info.qos = qos;
+
+	ircomm_do_event(self, IRCOMM_LMP_CONNECT_CONFIRM, skb, &info);
+
+	/* Drop reference count - see ircomm_tty_connect_confirm(). */
+	dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_lmp_connect_indication (instance, sap, qos, max_sdu_size,
+ *                                         max_header_size, skb)
+ *
+ *    Peer device wants to make a connection with us
+ *
+ */
+static void ircomm_lmp_connect_indication(void *instance, void *sap,
+					  struct qos_info *qos,
+					  __u32 max_seg_size,
+					  __u8 max_header_size,
+					  struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *)instance;
+	struct ircomm_info info;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(qos != NULL, return;);
+
+	info.max_data_size = max_seg_size;
+	info.max_header_size = max_header_size;
+	info.qos = qos;
+
+	ircomm_do_event(self, IRCOMM_LMP_CONNECT_INDICATION, skb, &info);
+
+	/* Drop reference count - see ircomm_tty_connect_indication(). */
+	dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_lmp_disconnect_indication (instance, sap, reason, skb)
+ *
+ *    Peer device has closed the connection, or the link went down for some
+ *    other reason
+ */
+static void ircomm_lmp_disconnect_indication(void *instance, void *sap, 
+					     LM_REASON reason,
+					     struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+	struct ircomm_info info;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+	info.reason = reason;
+
+	ircomm_do_event(self, IRCOMM_LMP_DISCONNECT_INDICATION, skb, &info);
+
+	/* Drop reference count - see ircomm_tty_disconnect_indication(). */
+	if(skb)
+		dev_kfree_skb(skb);
+}
+/*
+ * Function ircomm_open_lsap (self)
+ *
+ *    Open LSAP. This function will only be used when using "raw" services
+ *
+ */
+int ircomm_open_lsap(struct ircomm_cb *self)
+{
+	notify_t notify;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	/* Register callbacks */
+	irda_notify_init(&notify);
+	notify.data_indication       = ircomm_lmp_data_indication;
+	notify.connect_confirm       = ircomm_lmp_connect_confirm;
+	notify.connect_indication    = ircomm_lmp_connect_indication;
+	notify.disconnect_indication = ircomm_lmp_disconnect_indication;
+	notify.instance = self;
+	strlcpy(notify.name, "IrCOMM", sizeof(notify.name));
+
+	self->lsap = irlmp_open_lsap(LSAP_ANY, &notify, 0);
+	if (!self->lsap) {
+		IRDA_DEBUG(0,"%sfailed to allocate tsap\n", __FUNCTION__ );
+		return -1;
+	}
+	self->slsap_sel = self->lsap->slsap_sel;
+
+	/*
+	 *  Initialize the call-table for issuing commands
+	 */
+	self->issue.data_request       = ircomm_lmp_data_request;
+	self->issue.connect_request    = ircomm_lmp_connect_request;
+	self->issue.connect_response   = ircomm_lmp_connect_response;
+	self->issue.disconnect_request = ircomm_lmp_disconnect_request;
+
+	return 0;
+}
diff --git a/net/irda/ircomm/ircomm_param.c b/net/irda/ircomm/ircomm_param.c
new file mode 100644
index 00000000000..6009bab0509
--- /dev/null
+++ b/net/irda/ircomm/ircomm_param.c
@@ -0,0 +1,511 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_param.c
+ * Version:       1.0
+ * Description:   Parameter handling for the IrCOMM protocol
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 10:25:11 1999
+ * Modified at:   Sun Jan 30 14:32:03 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+#include <net/irda/ircomm_param.h>
+
+static int ircomm_param_service_type(void *instance, irda_param_t *param, 
+				     int get);
+static int ircomm_param_port_type(void *instance, irda_param_t *param, 
+				  int get);
+static int ircomm_param_port_name(void *instance, irda_param_t *param, 
+				  int get);
+static int ircomm_param_service_type(void *instance, irda_param_t *param, 
+				     int get);
+static int ircomm_param_data_rate(void *instance, irda_param_t *param, 
+				  int get);
+static int ircomm_param_data_format(void *instance, irda_param_t *param, 
+				    int get);
+static int ircomm_param_flow_control(void *instance, irda_param_t *param, 
+				     int get);
+static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get);
+static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get);
+static int ircomm_param_line_status(void *instance, irda_param_t *param, 
+				    int get);
+static int ircomm_param_dte(void *instance, irda_param_t *param, int get);
+static int ircomm_param_dce(void *instance, irda_param_t *param, int get);
+static int ircomm_param_poll(void *instance, irda_param_t *param, int get);
+
+static pi_minor_info_t pi_minor_call_table_common[] = {
+	{ ircomm_param_service_type, PV_INT_8_BITS },
+	{ ircomm_param_port_type,    PV_INT_8_BITS },
+	{ ircomm_param_port_name,    PV_STRING }
+};
+static pi_minor_info_t pi_minor_call_table_non_raw[] = {
+	{ ircomm_param_data_rate,    PV_INT_32_BITS | PV_BIG_ENDIAN },
+	{ ircomm_param_data_format,  PV_INT_8_BITS },
+	{ ircomm_param_flow_control, PV_INT_8_BITS },
+	{ ircomm_param_xon_xoff,     PV_INT_16_BITS },
+	{ ircomm_param_enq_ack,      PV_INT_16_BITS },
+	{ ircomm_param_line_status,  PV_INT_8_BITS }
+};
+static pi_minor_info_t pi_minor_call_table_9_wire[] = {
+	{ ircomm_param_dte,          PV_INT_8_BITS },
+	{ ircomm_param_dce,          PV_INT_8_BITS },
+	{ ircomm_param_poll,         PV_NO_VALUE },
+};
+
+static pi_major_info_t pi_major_call_table[] = {
+	{ pi_minor_call_table_common,  3 },
+	{ pi_minor_call_table_non_raw, 6 },
+ 	{ pi_minor_call_table_9_wire,  3 }
+/* 	{ pi_minor_call_table_centronics }  */
+};
+
+pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 };
+
+/*
+ * Function ircomm_param_request (self, pi, flush)
+ *
+ *    Queue a parameter for the control channel
+ *
+ */
+int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush)
+{
+	struct tty_struct *tty;
+	unsigned long flags;
+	struct sk_buff *skb;
+	int count;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	tty = self->tty;
+	if (!tty)
+		return 0;
+
+	/* Make sure we don't send parameters for raw mode */
+	if (self->service_type == IRCOMM_3_WIRE_RAW)
+		return 0;
+
+	spin_lock_irqsave(&self->spinlock, flags);
+
+	skb = self->ctrl_skb;	
+	if (!skb) {
+		skb = dev_alloc_skb(256);
+		if (!skb) {
+			spin_unlock_irqrestore(&self->spinlock, flags);
+			return -ENOMEM;
+		}
+		
+		skb_reserve(skb, self->max_header_size);
+		self->ctrl_skb = skb;
+	}
+	/* 
+	 * Inserting is a little bit tricky since we don't know how much
+	 * room we will need. But this should hopefully work OK 
+	 */
+	count = irda_param_insert(self, pi, skb->tail, skb_tailroom(skb),
+				  &ircomm_param_info);
+	if (count < 0) {
+		IRDA_WARNING("%s(), no room for parameter!\n", __FUNCTION__);
+		spin_unlock_irqrestore(&self->spinlock, flags);
+		return -1;
+	}
+	skb_put(skb, count);
+
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	IRDA_DEBUG(2, "%s(), skb->len=%d\n", __FUNCTION__ , skb->len);
+
+	if (flush) {
+		/* ircomm_tty_do_softint will take care of the rest */
+		schedule_work(&self->tqueue);
+	}
+
+	return count;
+}
+
+/*
+ * Function ircomm_param_service_type (self, buf, len)
+ *
+ *    Handle service type, this function will both be called after the LM-IAS
+ *    query and then the remote device sends its initial parameters
+ *
+ */
+static int ircomm_param_service_type(void *instance, irda_param_t *param, 
+				     int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	__u8 service_type = (__u8) param->pv.i;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (get) {
+		param->pv.i = self->settings.service_type;
+		return 0;
+	}
+
+	/* Find all common service types */
+	service_type &= self->service_type;
+	if (!service_type) {
+		IRDA_DEBUG(2, 
+			   "%s(), No common service type to use!\n", __FUNCTION__ );
+		return -1;
+	}
+	IRDA_DEBUG(0, "%s(), services in common=%02x\n", __FUNCTION__ ,
+		   service_type);
+
+	/*
+	 * Now choose a preferred service type of those available
+	 */
+	if (service_type & IRCOMM_CENTRONICS)
+		self->settings.service_type = IRCOMM_CENTRONICS;
+	else if (service_type & IRCOMM_9_WIRE)
+		self->settings.service_type = IRCOMM_9_WIRE;
+	else if (service_type & IRCOMM_3_WIRE)
+		self->settings.service_type = IRCOMM_3_WIRE;
+	else if (service_type & IRCOMM_3_WIRE_RAW)
+		self->settings.service_type = IRCOMM_3_WIRE_RAW;
+
+	IRDA_DEBUG(0, "%s(), resulting service type=0x%02x\n", __FUNCTION__ , 
+		   self->settings.service_type);
+
+	/* 
+	 * Now the line is ready for some communication. Check if we are a
+         * server, and send over some initial parameters.
+	 * Client do it in ircomm_tty_state_setup().
+	 * Note : we may get called from ircomm_tty_getvalue_confirm(),
+	 * therefore before we even have open any socket. And self->client
+	 * is initialised to TRUE only later. So, we check if the link is
+	 * really initialised. - Jean II
+	 */
+	if ((self->max_header_size != IRCOMM_TTY_HDR_UNINITIALISED) &&
+	    (!self->client) &&
+	    (self->settings.service_type != IRCOMM_3_WIRE_RAW))
+	{
+		/* Init connection */
+		ircomm_tty_send_initial_parameters(self);
+		ircomm_tty_link_established(self);
+	}
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_port_type (self, param)
+ *
+ *    The port type parameter tells if the devices are serial or parallel.
+ *    Since we only advertise serial service, this parameter should only
+ *    be equal to IRCOMM_SERIAL.
+ */
+static int ircomm_param_port_type(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = IRCOMM_SERIAL;
+	else {
+		self->settings.port_type = (__u8) param->pv.i;
+
+		IRDA_DEBUG(0, "%s(), port type=%d\n", __FUNCTION__ , 
+			   self->settings.port_type);
+	}
+	return 0;
+}
+
+/*
+ * Function ircomm_param_port_name (self, param)
+ *
+ *    Exchange port name
+ *
+ */
+static int ircomm_param_port_name(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (get) {
+		IRDA_DEBUG(0, "%s(), not imp!\n", __FUNCTION__ );
+	} else {
+		IRDA_DEBUG(0, "%s(), port-name=%s\n", __FUNCTION__ , param->pv.c);
+		strncpy(self->settings.port_name, param->pv.c, 32);
+	}
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_data_rate (self, param)
+ *
+ *    Exchange data rate to be used in this settings
+ *
+ */
+static int ircomm_param_data_rate(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (get)
+		param->pv.i = self->settings.data_rate;
+	else
+		self->settings.data_rate = param->pv.i;
+	
+	IRDA_DEBUG(2, "%s(), data rate = %d\n", __FUNCTION__ , param->pv.i);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_data_format (self, param)
+ *
+ *    Exchange data format to be used in this settings
+ *
+ */
+static int ircomm_param_data_format(void *instance, irda_param_t *param, 
+				    int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (get)
+		param->pv.i = self->settings.data_format;
+	else
+		self->settings.data_format = (__u8) param->pv.i;
+	
+	return 0;
+}
+
+/*
+ * Function ircomm_param_flow_control (self, param)
+ *
+ *    Exchange flow control settings to be used in this settings
+ *
+ */
+static int ircomm_param_flow_control(void *instance, irda_param_t *param, 
+				     int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->settings.flow_control;
+	else
+		self->settings.flow_control = (__u8) param->pv.i;
+
+	IRDA_DEBUG(1, "%s(), flow control = 0x%02x\n", __FUNCTION__ , (__u8) param->pv.i);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_xon_xoff (self, param)
+ *
+ *    Exchange XON/XOFF characters
+ *
+ */
+static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+	
+	if (get) {
+		param->pv.i = self->settings.xonxoff[0];
+		param->pv.i |= self->settings.xonxoff[1] << 8;
+	} else {
+		self->settings.xonxoff[0] = (__u16) param->pv.i & 0xff;
+		self->settings.xonxoff[1] = (__u16) param->pv.i >> 8;
+	}
+
+	IRDA_DEBUG(0, "%s(), XON/XOFF = 0x%02x,0x%02x\n", __FUNCTION__ , 
+		   param->pv.i & 0xff, param->pv.i >> 8);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_enq_ack (self, param)
+ *
+ *    Exchange ENQ/ACK characters
+ *
+ */
+static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+	
+	if (get) {
+		param->pv.i = self->settings.enqack[0];
+		param->pv.i |= self->settings.enqack[1] << 8;
+	} else {
+		self->settings.enqack[0] = (__u16) param->pv.i & 0xff;
+		self->settings.enqack[1] = (__u16) param->pv.i >> 8;
+	}
+
+	IRDA_DEBUG(0, "%s(), ENQ/ACK = 0x%02x,0x%02x\n", __FUNCTION__ ,
+		   param->pv.i & 0xff, param->pv.i >> 8);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_line_status (self, param)
+ *
+ *    
+ *
+ */
+static int ircomm_param_line_status(void *instance, irda_param_t *param, 
+				    int get)
+{
+	IRDA_DEBUG(2, "%s(), not impl.\n", __FUNCTION__ );
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_dte (instance, param)
+ *
+ *    If we get here, there must be some sort of null-modem connection, and
+ *    we are probably working in server mode as well.
+ */
+static int ircomm_param_dte(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	__u8 dte;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (get)
+		param->pv.i = self->settings.dte;
+	else {
+		dte = (__u8) param->pv.i;
+
+		self->settings.dce = 0;
+				
+		if (dte & IRCOMM_DELTA_DTR)
+			self->settings.dce |= (IRCOMM_DELTA_DSR|
+					      IRCOMM_DELTA_RI |
+					      IRCOMM_DELTA_CD);
+		if (dte & IRCOMM_DTR)
+			self->settings.dce |= (IRCOMM_DSR|
+					      IRCOMM_RI |
+					      IRCOMM_CD);
+		
+		if (dte & IRCOMM_DELTA_RTS)
+			self->settings.dce |= IRCOMM_DELTA_CTS;
+		if (dte & IRCOMM_RTS)
+			self->settings.dce |= IRCOMM_CTS;
+
+		/* Take appropriate actions */
+		ircomm_tty_check_modem_status(self);
+
+		/* Null modem cable emulator */
+		self->settings.null_modem = TRUE;
+	}
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_dce (instance, param)
+ *
+ *    
+ *
+ */
+static int ircomm_param_dce(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	__u8 dce;
+
+	IRDA_DEBUG(1, "%s(), dce = 0x%02x\n", __FUNCTION__ , (__u8) param->pv.i);
+
+	dce = (__u8) param->pv.i;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	self->settings.dce = dce;
+
+	/* Check if any of the settings have changed */
+	if (dce & 0x0f) {
+		if (dce & IRCOMM_DELTA_CTS) {
+			IRDA_DEBUG(2, "%s(), CTS \n", __FUNCTION__ );
+		}
+	}
+
+	ircomm_tty_check_modem_status(self);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_param_poll (instance, param)
+ *
+ *    Called when the peer device is polling for the line settings
+ *
+ */
+static int ircomm_param_poll(void *instance, irda_param_t *param, int get)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	/* Poll parameters are always of lenght 0 (just a signal) */
+	if (!get) {
+		/* Respond with DTE line settings */
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	}
+	return 0;
+}
+
+
+
+
+
diff --git a/net/irda/ircomm/ircomm_ttp.c b/net/irda/ircomm/ircomm_ttp.c
new file mode 100644
index 00000000000..d98bf3570d2
--- /dev/null
+++ b/net/irda/ircomm/ircomm_ttp.c
@@ -0,0 +1,369 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_ttp.c
+ * Version:       1.0
+ * Description:   Interface between IrCOMM and IrTTP
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 20:48:27 1999
+ * Modified at:   Mon Dec 13 11:35:13 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+
+#include <net/irda/ircomm_event.h>
+#include <net/irda/ircomm_ttp.h>
+
+static int ircomm_ttp_data_indication(void *instance, void *sap,
+				      struct sk_buff *skb);
+static void ircomm_ttp_connect_confirm(void *instance, void *sap,
+				       struct qos_info *qos, 
+				       __u32 max_sdu_size, 
+				       __u8 max_header_size,
+				       struct sk_buff *skb);
+static void ircomm_ttp_connect_indication(void *instance, void *sap,
+					  struct qos_info *qos,
+					  __u32 max_sdu_size,
+					  __u8 max_header_size,
+					  struct sk_buff *skb);
+static void ircomm_ttp_flow_indication(void *instance, void *sap,
+				       LOCAL_FLOW cmd);
+static void ircomm_ttp_disconnect_indication(void *instance, void *sap, 
+					     LM_REASON reason,
+					     struct sk_buff *skb);
+static int ircomm_ttp_data_request(struct ircomm_cb *self,
+				   struct sk_buff *skb, 
+				   int clen);
+static int ircomm_ttp_connect_request(struct ircomm_cb *self, 
+				      struct sk_buff *userdata, 
+				      struct ircomm_info *info);
+static int ircomm_ttp_connect_response(struct ircomm_cb *self,
+				       struct sk_buff *userdata);
+static int ircomm_ttp_disconnect_request(struct ircomm_cb *self, 
+					 struct sk_buff *userdata, 
+					 struct ircomm_info *info);
+
+/*
+ * Function ircomm_open_tsap (self)
+ *
+ *    
+ *
+ */
+int ircomm_open_tsap(struct ircomm_cb *self)
+{
+	notify_t notify;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	/* Register callbacks */
+	irda_notify_init(&notify);
+	notify.data_indication       = ircomm_ttp_data_indication;
+	notify.connect_confirm       = ircomm_ttp_connect_confirm;
+	notify.connect_indication    = ircomm_ttp_connect_indication;
+	notify.flow_indication       = ircomm_ttp_flow_indication;
+	notify.disconnect_indication = ircomm_ttp_disconnect_indication;
+	notify.instance = self;
+	strlcpy(notify.name, "IrCOMM", sizeof(notify.name));
+
+	self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT,
+				     &notify);
+	if (!self->tsap) {
+		IRDA_DEBUG(0, "%sfailed to allocate tsap\n", __FUNCTION__ );
+		return -1;
+	}
+	self->slsap_sel = self->tsap->stsap_sel;
+
+	/*
+	 *  Initialize the call-table for issuing commands
+	 */
+	self->issue.data_request       = ircomm_ttp_data_request;
+	self->issue.connect_request    = ircomm_ttp_connect_request;
+	self->issue.connect_response   = ircomm_ttp_connect_response;
+	self->issue.disconnect_request = ircomm_ttp_disconnect_request;
+
+	return 0;
+}
+
+/*
+ * Function ircomm_ttp_connect_request (self, userdata)
+ *
+ *    
+ *
+ */
+static int ircomm_ttp_connect_request(struct ircomm_cb *self, 
+				      struct sk_buff *userdata, 
+				      struct ircomm_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	/* Don't forget to refcount it - should be NULL anyway */
+	if(userdata)
+		skb_get(userdata);
+
+	ret = irttp_connect_request(self->tsap, info->dlsap_sel,
+				    info->saddr, info->daddr, NULL, 
+				    TTP_SAR_DISABLE, userdata); 
+
+	return ret;
+}	
+
+/*
+ * Function ircomm_ttp_connect_response (self, skb)
+ *
+ *    
+ *
+ */
+static int ircomm_ttp_connect_response(struct ircomm_cb *self,
+				       struct sk_buff *userdata)
+{
+	int ret;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	/* Don't forget to refcount it - should be NULL anyway */
+	if(userdata)
+		skb_get(userdata);
+
+	ret = irttp_connect_response(self->tsap, TTP_SAR_DISABLE, userdata);
+
+	return ret;
+}
+
+/*
+ * Function ircomm_ttp_data_request (self, userdata)
+ *
+ *    Send IrCOMM data to IrTTP layer. Currently we do not try to combine 
+ *    control data with pure data, so they will be sent as separate frames. 
+ *    Should not be a big problem though, since control frames are rare. But
+ *    some of them are sent after connection establishment, so this can 
+ *    increase the latency a bit.
+ */
+static int ircomm_ttp_data_request(struct ircomm_cb *self,
+				   struct sk_buff *skb, 
+				   int clen)
+{
+	int ret;
+
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	IRDA_DEBUG(2, "%s(), clen=%d\n", __FUNCTION__ , clen);
+
+	/* 
+	 * Insert clen field, currently we either send data only, or control
+	 * only frames, to make things easier and avoid queueing
+	 */
+	IRDA_ASSERT(skb_headroom(skb) >= IRCOMM_HEADER_SIZE, return -1;);
+
+	/* Don't forget to refcount it - see ircomm_tty_do_softint() */
+	skb_get(skb);
+
+	skb_push(skb, IRCOMM_HEADER_SIZE);
+
+	skb->data[0] = clen;
+
+	ret = irttp_data_request(self->tsap, skb);
+	if (ret) {
+		IRDA_ERROR("%s(), failed\n", __FUNCTION__);
+		/* irttp_data_request already free the packet */
+	}
+
+	return ret;
+}
+
+/*
+ * Function ircomm_ttp_data_indication (instance, sap, skb)
+ *
+ *    Incoming data
+ *
+ */
+static int ircomm_ttp_data_indication(void *instance, void *sap,
+				      struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	ircomm_do_event(self, IRCOMM_TTP_DATA_INDICATION, skb, NULL);
+
+	/* Drop reference count - see ircomm_tty_data_indication(). */
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+static void ircomm_ttp_connect_confirm(void *instance, void *sap,
+				       struct qos_info *qos, 
+				       __u32 max_sdu_size, 
+				       __u8 max_header_size,
+				       struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+	struct ircomm_info info;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(qos != NULL, goto out;);
+
+	if (max_sdu_size != TTP_SAR_DISABLE) {
+		IRDA_ERROR("%s(), SAR not allowed for IrCOMM!\n",
+			   __FUNCTION__);
+		goto out;
+	}
+
+	info.max_data_size = irttp_get_max_seg_size(self->tsap)
+		- IRCOMM_HEADER_SIZE;
+	info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE;
+	info.qos = qos;
+
+	ircomm_do_event(self, IRCOMM_TTP_CONNECT_CONFIRM, skb, &info);
+
+out:
+	/* Drop reference count - see ircomm_tty_connect_confirm(). */
+	dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_ttp_connect_indication (instance, sap, qos, max_sdu_size,
+ *                                         max_header_size, skb)
+ *
+ *    
+ *
+ */
+static void ircomm_ttp_connect_indication(void *instance, void *sap,
+					  struct qos_info *qos,
+					  __u32 max_sdu_size,
+					  __u8 max_header_size,
+					  struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *)instance;
+	struct ircomm_info info;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(qos != NULL, goto out;);
+
+	if (max_sdu_size != TTP_SAR_DISABLE) {
+		IRDA_ERROR("%s(), SAR not allowed for IrCOMM!\n",
+			   __FUNCTION__);
+		goto out;
+	}
+
+	info.max_data_size = irttp_get_max_seg_size(self->tsap)
+		- IRCOMM_HEADER_SIZE;
+	info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE;
+	info.qos = qos;
+
+	ircomm_do_event(self, IRCOMM_TTP_CONNECT_INDICATION, skb, &info);
+
+out:
+	/* Drop reference count - see ircomm_tty_connect_indication(). */
+	dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_ttp_disconnect_request (self, userdata, info)
+ *
+ *    
+ *
+ */
+static int ircomm_ttp_disconnect_request(struct ircomm_cb *self, 
+					 struct sk_buff *userdata, 
+					 struct ircomm_info *info)
+{
+	int ret;
+
+	/* Don't forget to refcount it - should be NULL anyway */
+	if(userdata)
+		skb_get(userdata);
+
+	ret = irttp_disconnect_request(self->tsap, userdata, P_NORMAL);
+
+	return ret;
+}
+
+/*
+ * Function ircomm_ttp_disconnect_indication (instance, sap, reason, skb)
+ *
+ *    
+ *
+ */
+static void ircomm_ttp_disconnect_indication(void *instance, void *sap, 
+					     LM_REASON reason,
+					     struct sk_buff *skb)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+	struct ircomm_info info;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+
+	info.reason = reason;
+
+	ircomm_do_event(self, IRCOMM_TTP_DISCONNECT_INDICATION, skb, &info);
+
+	/* Drop reference count - see ircomm_tty_disconnect_indication(). */
+	if(skb)
+		dev_kfree_skb(skb);
+}
+
+/*
+ * Function ircomm_ttp_flow_indication (instance, sap, cmd)
+ *
+ *    Layer below is telling us to start or stop the flow of data
+ *
+ */
+static void ircomm_ttp_flow_indication(void *instance, void *sap,
+				       LOCAL_FLOW cmd)
+{
+	struct ircomm_cb *self = (struct ircomm_cb *) instance;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;);
+	
+	if (self->notify.flow_indication)
+		self->notify.flow_indication(self->notify.instance, self, cmd);
+}
+
+
diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c
new file mode 100644
index 00000000000..5d1e61168eb
--- /dev/null
+++ b/net/irda/ircomm/ircomm_tty.c
@@ -0,0 +1,1405 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty.c
+ * Version:       1.0
+ * Description:   IrCOMM serial TTY driver
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Jun  6 21:00:56 1999
+ * Modified at:   Wed Feb 23 00:09:02 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Sources:       serial.c and previous IrCOMM work by Takahide Higuchi
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>		/* for MODULE_ALIAS_CHARDEV_MAJOR */
+
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+static int  ircomm_tty_open(struct tty_struct *tty, struct file *filp);
+static void ircomm_tty_close(struct tty_struct * tty, struct file *filp);
+static int  ircomm_tty_write(struct tty_struct * tty,
+			     const unsigned char *buf, int count);
+static int  ircomm_tty_write_room(struct tty_struct *tty);
+static void ircomm_tty_throttle(struct tty_struct *tty);
+static void ircomm_tty_unthrottle(struct tty_struct *tty);
+static int  ircomm_tty_chars_in_buffer(struct tty_struct *tty);
+static void ircomm_tty_flush_buffer(struct tty_struct *tty);
+static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch);
+static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout);
+static void ircomm_tty_hangup(struct tty_struct *tty);
+static void ircomm_tty_do_softint(void *private_);
+static void ircomm_tty_shutdown(struct ircomm_tty_cb *self);
+static void ircomm_tty_stop(struct tty_struct *tty);
+
+static int ircomm_tty_data_indication(void *instance, void *sap,
+				      struct sk_buff *skb);
+static int ircomm_tty_control_indication(void *instance, void *sap,
+					 struct sk_buff *skb);
+static void ircomm_tty_flow_indication(void *instance, void *sap, 
+				       LOCAL_FLOW cmd);
+#ifdef CONFIG_PROC_FS
+static int ircomm_tty_read_proc(char *buf, char **start, off_t offset, int len,
+				int *eof, void *unused);
+#endif /* CONFIG_PROC_FS */
+static struct tty_driver *driver;
+
+hashbin_t *ircomm_tty = NULL;
+
+static struct tty_operations ops = {
+	.open            = ircomm_tty_open,
+	.close           = ircomm_tty_close,
+	.write           = ircomm_tty_write,
+	.write_room      = ircomm_tty_write_room,
+	.chars_in_buffer = ircomm_tty_chars_in_buffer,
+	.flush_buffer    = ircomm_tty_flush_buffer,
+	.ioctl           = ircomm_tty_ioctl,	/* ircomm_tty_ioctl.c */
+	.tiocmget        = ircomm_tty_tiocmget,	/* ircomm_tty_ioctl.c */
+	.tiocmset        = ircomm_tty_tiocmset,	/* ircomm_tty_ioctl.c */
+	.throttle        = ircomm_tty_throttle,
+	.unthrottle      = ircomm_tty_unthrottle,
+	.send_xchar      = ircomm_tty_send_xchar,
+	.set_termios     = ircomm_tty_set_termios,
+	.stop            = ircomm_tty_stop,
+	.start           = ircomm_tty_start,
+	.hangup          = ircomm_tty_hangup,
+	.wait_until_sent = ircomm_tty_wait_until_sent,
+#ifdef CONFIG_PROC_FS
+	.read_proc       = ircomm_tty_read_proc,
+#endif /* CONFIG_PROC_FS */
+};
+
+/*
+ * Function ircomm_tty_init()
+ *
+ *    Init IrCOMM TTY layer/driver
+ *
+ */
+static int __init ircomm_tty_init(void)
+{
+	driver = alloc_tty_driver(IRCOMM_TTY_PORTS);
+	if (!driver)
+		return -ENOMEM;
+	ircomm_tty = hashbin_new(HB_LOCK); 
+	if (ircomm_tty == NULL) {
+		IRDA_ERROR("%s(), can't allocate hashbin!\n", __FUNCTION__);
+		put_tty_driver(driver);
+		return -ENOMEM;
+	}
+
+	driver->owner		= THIS_MODULE;
+	driver->driver_name     = "ircomm";
+	driver->name            = "ircomm";
+	driver->devfs_name      = "ircomm";
+	driver->major           = IRCOMM_TTY_MAJOR;
+	driver->minor_start     = IRCOMM_TTY_MINOR;
+	driver->type            = TTY_DRIVER_TYPE_SERIAL;
+	driver->subtype         = SERIAL_TYPE_NORMAL;
+	driver->init_termios    = tty_std_termios;
+	driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	driver->flags           = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(driver, &ops);
+	if (tty_register_driver(driver)) {
+		IRDA_ERROR("%s(): Couldn't register serial driver\n",
+			   __FUNCTION__);
+		put_tty_driver(driver);
+		return -1;
+	}
+	return 0;
+}
+
+static void __exit __ircomm_tty_cleanup(struct ircomm_tty_cb *self)
+{
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	ircomm_tty_shutdown(self);
+
+	self->magic = 0;
+	kfree(self);
+}
+
+/*
+ * Function ircomm_tty_cleanup ()
+ *
+ *    Remove IrCOMM TTY layer/driver
+ *
+ */
+static void __exit ircomm_tty_cleanup(void)
+{
+	int ret;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );	
+
+	ret = tty_unregister_driver(driver);
+        if (ret) {
+                IRDA_ERROR("%s(), failed to unregister driver\n",
+			   __FUNCTION__);
+		return;
+	}
+
+	hashbin_delete(ircomm_tty, (FREE_FUNC) __ircomm_tty_cleanup);
+	put_tty_driver(driver);
+}
+
+/*
+ * Function ircomm_startup (self)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_startup(struct ircomm_tty_cb *self)
+{
+	notify_t notify;
+	int ret = -ENODEV;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	/* Check if already open */
+	if (test_and_set_bit(ASYNC_B_INITIALIZED, &self->flags)) {
+		IRDA_DEBUG(2, "%s(), already open so break out!\n", __FUNCTION__ );
+		return 0;
+	}
+
+	/* Register with IrCOMM */
+	irda_notify_init(&notify);
+	/* These callbacks we must handle ourselves */
+	notify.data_indication       = ircomm_tty_data_indication;
+	notify.udata_indication      = ircomm_tty_control_indication;
+ 	notify.flow_indication       = ircomm_tty_flow_indication;
+
+	/* Use the ircomm_tty interface for these ones */
+ 	notify.disconnect_indication = ircomm_tty_disconnect_indication;
+	notify.connect_confirm       = ircomm_tty_connect_confirm;
+ 	notify.connect_indication    = ircomm_tty_connect_indication;
+	strlcpy(notify.name, "ircomm_tty", sizeof(notify.name));
+	notify.instance = self;
+
+	if (!self->ircomm) {
+		self->ircomm = ircomm_open(&notify, self->service_type, 
+					   self->line);
+	}
+	if (!self->ircomm)
+		goto err;
+
+	self->slsap_sel = self->ircomm->slsap_sel;
+
+	/* Connect IrCOMM link with remote device */
+	ret = ircomm_tty_attach_cable(self);
+	if (ret < 0) {
+		IRDA_ERROR("%s(), error attaching cable!\n", __FUNCTION__);
+		goto err;
+	}
+
+	return 0;
+err:
+	clear_bit(ASYNC_B_INITIALIZED, &self->flags);
+	return ret;
+}
+
+/*
+ * Function ircomm_block_til_ready (self, filp)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, 
+				      struct file *filp)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int		retval;
+	int		do_clocal = 0, extra_count = 0;
+	unsigned long	flags;
+	struct tty_struct *tty;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	tty = self->tty;
+
+	/*
+	 * If non-blocking mode is set, or the port is not enabled,
+	 * then make the check up front and then exit.
+	 */	
+	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+		/* nonblock mode is set or port is not enabled */
+		self->flags |= ASYNC_NORMAL_ACTIVE;
+		IRDA_DEBUG(1, "%s(), O_NONBLOCK requested!\n", __FUNCTION__ );
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL) {
+		IRDA_DEBUG(1, "%s(), doing CLOCAL!\n", __FUNCTION__ );
+		do_clocal = 1;
+	}
+	
+	/* Wait for carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, self->open_count is dropped by one, so that
+	 * mgsl_close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+	 
+	retval = 0;
+	add_wait_queue(&self->open_wait, &wait);
+	
+	IRDA_DEBUG(2, "%s(%d):block_til_ready before block on %s open_count=%d\n",
+	      __FILE__,__LINE__, tty->driver->name, self->open_count );
+
+	/* As far as I can see, we protect open_count - Jean II */
+	spin_lock_irqsave(&self->spinlock, flags);
+	if (!tty_hung_up_p(filp)) {
+		extra_count = 1;
+		self->open_count--;
+	}
+	spin_unlock_irqrestore(&self->spinlock, flags);
+	self->blocked_open++;
+	
+	while (1) {
+		if (tty->termios->c_cflag & CBAUD) {
+			/* Here, we use to lock those two guys, but
+			 * as ircomm_param_request() does it itself,
+			 * I don't see the point (and I see the deadlock).
+			 * Jean II */
+			self->settings.dte |= IRCOMM_RTS + IRCOMM_DTR;
+		 	
+			ircomm_param_request(self, IRCOMM_DTE, TRUE);
+		}
+		
+		current->state = TASK_INTERRUPTIBLE;
+		
+		if (tty_hung_up_p(filp) ||
+		    !test_bit(ASYNC_B_INITIALIZED, &self->flags)) {
+			retval = (self->flags & ASYNC_HUP_NOTIFY) ?
+					-EAGAIN : -ERESTARTSYS;
+			break;
+		}
+		
+		/*  
+		 * Check if link is ready now. Even if CLOCAL is
+		 * specified, we cannot return before the IrCOMM link is
+		 * ready 
+		 */
+ 		if (!test_bit(ASYNC_B_CLOSING, &self->flags) &&
+ 		    (do_clocal || (self->settings.dce & IRCOMM_CD)) &&
+		    self->state == IRCOMM_TTY_READY)
+		{
+ 			break;
+		}
+			
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+		
+		IRDA_DEBUG(1, "%s(%d):block_til_ready blocking on %s open_count=%d\n",
+		      __FILE__,__LINE__, tty->driver->name, self->open_count );
+		
+		schedule();
+	}
+	
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&self->open_wait, &wait);
+	
+	if (extra_count) {
+		/* ++ is not atomic, so this should be protected - Jean II */
+		spin_lock_irqsave(&self->spinlock, flags);
+		self->open_count++;
+		spin_unlock_irqrestore(&self->spinlock, flags);
+	}
+	self->blocked_open--;
+	
+	IRDA_DEBUG(1, "%s(%d):block_til_ready after blocking on %s open_count=%d\n",
+	      __FILE__,__LINE__, tty->driver->name, self->open_count);
+			 
+	if (!retval)
+		self->flags |= ASYNC_NORMAL_ACTIVE;
+		
+	return retval;	
+}
+
+/*
+ * Function ircomm_tty_open (tty, filp)
+ *
+ *    This routine is called when a particular tty device is opened. This
+ *    routine is mandatory; if this routine is not filled in, the attempted
+ *    open will fail with ENODEV.
+ */
+static int ircomm_tty_open(struct tty_struct *tty, struct file *filp)
+{
+	struct ircomm_tty_cb *self;
+	unsigned int line;
+	unsigned long	flags;
+	int ret;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	line = tty->index;
+	if ((line < 0) || (line >= IRCOMM_TTY_PORTS)) {
+		return -ENODEV;
+	}
+
+	/* Check if instance already exists */
+	self = hashbin_lock_find(ircomm_tty, line, NULL);
+	if (!self) {
+		/* No, so make new instance */
+		self = kmalloc(sizeof(struct ircomm_tty_cb), GFP_KERNEL);
+		if (self == NULL) {
+			IRDA_ERROR("%s(), kmalloc failed!\n", __FUNCTION__);
+			return -ENOMEM;
+		}
+		memset(self, 0, sizeof(struct ircomm_tty_cb));
+		
+		self->magic = IRCOMM_TTY_MAGIC;
+		self->flow = FLOW_STOP;
+
+		self->line = line;
+		INIT_WORK(&self->tqueue, ircomm_tty_do_softint, self);
+		self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED;
+		self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED;
+		self->close_delay = 5*HZ/10;
+		self->closing_wait = 30*HZ;
+
+		/* Init some important stuff */
+		init_timer(&self->watchdog_timer);
+		init_waitqueue_head(&self->open_wait);
+ 		init_waitqueue_head(&self->close_wait);
+		spin_lock_init(&self->spinlock);
+
+		/* 
+		 * Force TTY into raw mode by default which is usually what
+		 * we want for IrCOMM and IrLPT. This way applications will
+		 * not have to twiddle with printcap etc.  
+		 */
+		tty->termios->c_iflag = 0;
+		tty->termios->c_oflag = 0;
+
+		/* Insert into hash */
+		hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL);
+	}
+	/* ++ is not atomic, so this should be protected - Jean II */
+	spin_lock_irqsave(&self->spinlock, flags);
+	self->open_count++;
+
+	tty->driver_data = self;
+	self->tty = tty;
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	IRDA_DEBUG(1, "%s(), %s%d, count = %d\n", __FUNCTION__ , tty->driver->name, 
+		   self->line, self->open_count);
+
+	/* Not really used by us, but lets do it anyway */
+	self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	/*
+	 * If the port is the middle of closing, bail out now
+	 */
+	if (tty_hung_up_p(filp) ||
+	    test_bit(ASYNC_B_CLOSING, &self->flags)) {
+
+		/* Hm, why are we blocking on ASYNC_CLOSING if we
+		 * do return -EAGAIN/-ERESTARTSYS below anyway?
+		 * IMHO it's either not needed in the first place
+		 * or for some reason we need to make sure the async
+		 * closing has been finished - if so, wouldn't we
+		 * probably better sleep uninterruptible?
+		 */
+
+		if (wait_event_interruptible(self->close_wait, !test_bit(ASYNC_B_CLOSING, &self->flags))) {
+			IRDA_WARNING("%s - got signal while blocking on ASYNC_CLOSING!\n",
+				     __FUNCTION__);
+			return -ERESTARTSYS;
+		}
+
+#ifdef SERIAL_DO_RESTART
+		return ((self->flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+#else
+		return -EAGAIN;
+#endif
+	}
+
+	/* Check if this is a "normal" ircomm device, or an irlpt device */
+	if (line < 0x10) {
+		self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE;
+		self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */
+		/* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */
+		self->settings.dce = IRCOMM_CTS | IRCOMM_CD | IRCOMM_DSR | IRCOMM_RI; /* Default line settings */
+		IRDA_DEBUG(2, "%s(), IrCOMM device\n", __FUNCTION__ );
+	} else {
+		IRDA_DEBUG(2, "%s(), IrLPT device\n", __FUNCTION__ );
+		self->service_type = IRCOMM_3_WIRE_RAW;
+		self->settings.service_type = IRCOMM_3_WIRE_RAW; /* Default */
+	}
+
+	ret = ircomm_tty_startup(self);
+	if (ret)
+		return ret;
+
+	ret = ircomm_tty_block_til_ready(self, filp);
+	if (ret) {
+		IRDA_DEBUG(2, 
+		      "%s(), returning after block_til_ready with %d\n", __FUNCTION__ ,
+		      ret);
+
+		return ret;
+	}
+	return 0;
+}
+
+/*
+ * Function ircomm_tty_close (tty, filp)
+ *
+ *    This routine is called when a particular tty device is closed.
+ *
+ */
+static void ircomm_tty_close(struct tty_struct *tty, struct file *filp)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned long flags;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	if (!tty)
+		return;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	spin_lock_irqsave(&self->spinlock, flags);
+
+	if (tty_hung_up_p(filp)) {
+		spin_unlock_irqrestore(&self->spinlock, flags);
+
+		IRDA_DEBUG(0, "%s(), returning 1\n", __FUNCTION__ );
+		return;
+	}
+
+	if ((tty->count == 1) && (self->open_count != 1)) {
+		/*
+		 * Uh, oh.  tty->count is 1, which means that the tty
+		 * structure will be freed.  state->count should always
+		 * be one in these conditions.  If it's greater than
+		 * one, we've got real problems, since it means the
+		 * serial port won't be shutdown.
+		 */
+		IRDA_DEBUG(0, "%s(), bad serial port count; "
+			   "tty->count is 1, state->count is %d\n", __FUNCTION__ , 
+			   self->open_count);
+		self->open_count = 1;
+	}
+
+	if (--self->open_count < 0) {
+		IRDA_ERROR("%s(), bad serial port count for ttys%d: %d\n",
+			   __FUNCTION__, self->line, self->open_count);
+		self->open_count = 0;
+	}
+	if (self->open_count) {
+		spin_unlock_irqrestore(&self->spinlock, flags);
+
+		IRDA_DEBUG(0, "%s(), open count > 0\n", __FUNCTION__ );
+		return;
+	}
+
+	/* Hum... Should be test_and_set_bit ??? - Jean II */
+	set_bit(ASYNC_B_CLOSING, &self->flags);
+
+	/* We need to unlock here (we were unlocking at the end of this
+	 * function), because tty_wait_until_sent() may schedule.
+	 * I don't know if the rest should be protected somehow,
+	 * so someone should check. - Jean II */
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	/*
+	 * Now we wait for the transmit buffer to clear; and we notify 
+	 * the line discipline to only process XON/XOFF characters.
+	 */
+	tty->closing = 1;
+	if (self->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, self->closing_wait);
+
+	ircomm_tty_shutdown(self);
+
+	if (tty->driver->flush_buffer)
+		tty->driver->flush_buffer(tty);
+	if (tty->ldisc.flush_buffer)
+		tty->ldisc.flush_buffer(tty);
+
+	tty->closing = 0;
+	self->tty = NULL;
+
+	if (self->blocked_open) {
+		if (self->close_delay) {
+			current->state = TASK_INTERRUPTIBLE;
+			schedule_timeout(self->close_delay);
+		}
+		wake_up_interruptible(&self->open_wait);
+	}
+
+	self->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+	wake_up_interruptible(&self->close_wait);
+}
+
+/*
+ * Function ircomm_tty_flush_buffer (tty)
+ *
+ *    
+ *
+ */
+static void ircomm_tty_flush_buffer(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	/* 
+	 * Let do_softint() do this to avoid race condition with 
+	 * do_softint() ;-) 
+	 */
+	schedule_work(&self->tqueue);
+}
+
+/*
+ * Function ircomm_tty_do_softint (private_)
+ *
+ *    We use this routine to give the write wakeup to the user at at a
+ *    safe time (as fast as possible after write have completed). This 
+ *    can be compared to the Tx interrupt.
+ */
+static void ircomm_tty_do_softint(void *private_)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) private_;
+	struct tty_struct *tty;
+	unsigned long flags;
+	struct sk_buff *skb, *ctrl_skb;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if (!self || self->magic != IRCOMM_TTY_MAGIC)
+		return;
+
+	tty = self->tty;
+	if (!tty)
+		return;
+
+	/* Unlink control buffer */
+	spin_lock_irqsave(&self->spinlock, flags);
+
+	ctrl_skb = self->ctrl_skb;
+	self->ctrl_skb = NULL;
+
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	/* Flush control buffer if any */
+	if(ctrl_skb) {
+		if(self->flow == FLOW_START)
+			ircomm_control_request(self->ircomm, ctrl_skb);
+		/* Drop reference count - see ircomm_ttp_data_request(). */
+		dev_kfree_skb(ctrl_skb);
+	}
+
+	if (tty->hw_stopped)
+		return;
+
+	/* Unlink transmit buffer */
+	spin_lock_irqsave(&self->spinlock, flags);
+	
+	skb = self->tx_skb;
+	self->tx_skb = NULL;
+
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	/* Flush transmit buffer if any */
+	if (skb) {
+		ircomm_tty_do_event(self, IRCOMM_TTY_DATA_REQUEST, skb, NULL);
+		/* Drop reference count - see ircomm_ttp_data_request(). */
+		dev_kfree_skb(skb);
+	}
+		
+	/* Check if user (still) wants to be waken up */
+	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && 
+	    tty->ldisc.write_wakeup)
+	{
+		(tty->ldisc.write_wakeup)(tty);
+	}
+	wake_up_interruptible(&tty->write_wait);
+}
+
+/*
+ * Function ircomm_tty_write (tty, buf, count)
+ *
+ *    This routine is called by the kernel to write a series of characters
+ *    to the tty device. The characters may come from user space or kernel
+ *    space. This routine will return the number of characters actually
+ *    accepted for writing. This routine is mandatory.
+ */
+static int ircomm_tty_write(struct tty_struct *tty,
+			    const unsigned char *buf, int count)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned long flags;
+	struct sk_buff *skb;
+	int tailroom = 0;
+	int len = 0;
+	int size;
+
+	IRDA_DEBUG(2, "%s(), count=%d, hw_stopped=%d\n", __FUNCTION__ , count,
+		   tty->hw_stopped);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	/* We may receive packets from the TTY even before we have finished
+	 * our setup. Not cool.
+	 * The problem is that we don't know the final header and data size
+	 * to create the proper skb, so any skb we would create would have
+	 * bogus header and data size, so need care.
+	 * We use a bogus header size to safely detect this condition.
+	 * Another problem is that hw_stopped was set to 0 way before it
+	 * should be, so we would drop this skb. It should now be fixed.
+	 * One option is to not accept data until we are properly setup.
+	 * But, I suspect that when it happens, the ppp line discipline
+	 * just "drops" the data, which might screw up connect scripts.
+	 * The second option is to create a "safe skb", with large header
+	 * and small size (see ircomm_tty_open() for values).
+	 * We just need to make sure that when the real values get filled,
+	 * we don't mess up the original "safe skb" (see tx_data_size).
+	 * Jean II */
+	if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED) {
+		IRDA_DEBUG(1, "%s() : not initialised\n", __FUNCTION__);
+#ifdef IRCOMM_NO_TX_BEFORE_INIT
+		/* We didn't consume anything, TTY will retry */
+		return 0;
+#endif
+	}
+
+	if (count < 1)
+		return 0;
+
+	/* Protect our manipulation of self->tx_skb and related */
+	spin_lock_irqsave(&self->spinlock, flags);
+
+	/* Fetch current transmit buffer */
+	skb = self->tx_skb;
+
+	/*  
+	 * Send out all the data we get, possibly as multiple fragmented
+	 * frames, but this will only happen if the data is larger than the
+	 * max data size. The normal case however is just the opposite, and
+	 * this function may be called multiple times, and will then actually
+	 * defragment the data and send it out as one packet as soon as 
+	 * possible, but at a safer point in time
+	 */
+	while (count) {
+		size = count;
+
+		/* Adjust data size to the max data size */
+		if (size > self->max_data_size)
+			size = self->max_data_size;
+		
+		/* 
+		 * Do we already have a buffer ready for transmit, or do
+		 * we need to allocate a new frame 
+		 */
+		if (skb) {			
+			/* 
+			 * Any room for more data at the end of the current 
+			 * transmit buffer? Cannot use skb_tailroom, since
+			 * dev_alloc_skb gives us a larger skb than we 
+			 * requested
+			 * Note : use tx_data_size, because max_data_size
+			 * may have changed and we don't want to overwrite
+			 * the skb. - Jean II
+			 */
+			if ((tailroom = (self->tx_data_size - skb->len)) > 0) {
+				/* Adjust data to tailroom */
+				if (size > tailroom)
+					size = tailroom;
+			} else {
+				/* 
+				 * Current transmit frame is full, so break 
+				 * out, so we can send it as soon as possible
+				 */
+				break;
+			}
+		} else {
+			/* Prepare a full sized frame */
+			skb = dev_alloc_skb(self->max_data_size+
+					    self->max_header_size);
+			if (!skb) {
+				spin_unlock_irqrestore(&self->spinlock, flags);
+				return -ENOBUFS;
+			}
+			skb_reserve(skb, self->max_header_size);
+			self->tx_skb = skb;
+			/* Remember skb size because max_data_size may
+			 * change later on - Jean II */
+			self->tx_data_size = self->max_data_size;
+		}
+
+		/* Copy data */
+		memcpy(skb_put(skb,size), buf + len, size);
+
+		count -= size;
+		len += size;
+	}
+
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	/*     
+	 * Schedule a new thread which will transmit the frame as soon
+	 * as possible, but at a safe point in time. We do this so the
+	 * "user" can give us data multiple times, as PPP does (because of
+	 * its 256 byte tx buffer). We will then defragment and send out
+	 * all this data as one single packet.  
+	 */
+	schedule_work(&self->tqueue);
+	
+	return len;
+}
+
+/*
+ * Function ircomm_tty_write_room (tty)
+ *
+ *    This routine returns the numbers of characters the tty driver will
+ *    accept for queuing to be written. This number is subject to change as
+ *    output buffers get emptied, or if the output flow control is acted.
+ */
+static int ircomm_tty_write_room(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned long flags;
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+#ifdef IRCOMM_NO_TX_BEFORE_INIT
+	/* max_header_size tells us if the channel is initialised or not. */
+	if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED)
+		/* Don't bother us yet */
+		return 0;
+#endif
+
+	/* Check if we are allowed to transmit any data.
+	 * hw_stopped is the regular flow control.
+	 * Jean II */
+	if (tty->hw_stopped)
+		ret = 0;
+	else {
+		spin_lock_irqsave(&self->spinlock, flags);
+		if (self->tx_skb)
+			ret = self->tx_data_size - self->tx_skb->len;
+		else
+			ret = self->max_data_size;
+		spin_unlock_irqrestore(&self->spinlock, flags);
+	}
+	IRDA_DEBUG(2, "%s(), ret=%d\n", __FUNCTION__ , ret);
+
+	return ret;
+}
+
+/*
+ * Function ircomm_tty_wait_until_sent (tty, timeout)
+ *
+ *    This routine waits until the device has written out all of the
+ *    characters in its transmitter FIFO.
+ */
+static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned long orig_jiffies, poll_time;
+	unsigned long flags;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	orig_jiffies = jiffies;
+
+	/* Set poll time to 200 ms */
+	poll_time = IRDA_MIN(timeout, msecs_to_jiffies(200));
+
+	spin_lock_irqsave(&self->spinlock, flags);
+	while (self->tx_skb && self->tx_skb->len) {
+		spin_unlock_irqrestore(&self->spinlock, flags);
+		current->state = TASK_INTERRUPTIBLE;
+		schedule_timeout(poll_time);
+		spin_lock_irqsave(&self->spinlock, flags);
+		if (signal_pending(current))
+			break;
+		if (timeout && time_after(jiffies, orig_jiffies + timeout))
+			break;
+	}
+	spin_unlock_irqrestore(&self->spinlock, flags);
+	current->state = TASK_RUNNING;
+}
+
+/*
+ * Function ircomm_tty_throttle (tty)
+ *
+ *    This routine notifies the tty driver that input buffers for the line
+ *    discipline are close to full, and it should somehow signal that no
+ *    more characters should be sent to the tty.  
+ */
+static void ircomm_tty_throttle(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	/* Software flow control? */
+	if (I_IXOFF(tty))
+		ircomm_tty_send_xchar(tty, STOP_CHAR(tty));
+	
+	/* Hardware flow control? */
+	if (tty->termios->c_cflag & CRTSCTS) {
+		self->settings.dte &= ~IRCOMM_RTS;
+		self->settings.dte |= IRCOMM_DELTA_RTS;
+	
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	}
+
+        ircomm_flow_request(self->ircomm, FLOW_STOP);
+}
+
+/*
+ * Function ircomm_tty_unthrottle (tty)
+ *
+ *    This routine notifies the tty drivers that it should signals that
+ *    characters can now be sent to the tty without fear of overrunning the
+ *    input buffers of the line disciplines.
+ */
+static void ircomm_tty_unthrottle(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	/* Using software flow control? */
+	if (I_IXOFF(tty)) {
+		ircomm_tty_send_xchar(tty, START_CHAR(tty));
+	}
+
+	/* Using hardware flow control? */
+	if (tty->termios->c_cflag & CRTSCTS) {
+		self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS);
+
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+		IRDA_DEBUG(1, "%s(), FLOW_START\n", __FUNCTION__ );
+	}
+        ircomm_flow_request(self->ircomm, FLOW_START);
+}
+
+/*
+ * Function ircomm_tty_chars_in_buffer (tty)
+ *
+ *    Indicates if there are any data in the buffer
+ *
+ */
+static int ircomm_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned long flags;
+	int len = 0;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	spin_lock_irqsave(&self->spinlock, flags);
+
+	if (self->tx_skb)
+		len = self->tx_skb->len;
+
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	return len;
+}
+
+static void ircomm_tty_shutdown(struct ircomm_tty_cb *self)
+{
+	unsigned long flags;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	if (!test_and_clear_bit(ASYNC_B_INITIALIZED, &self->flags))
+		return;
+
+	ircomm_tty_detach_cable(self);
+
+	spin_lock_irqsave(&self->spinlock, flags);
+
+	del_timer(&self->watchdog_timer);
+	
+	/* Free parameter buffer */
+	if (self->ctrl_skb) {
+		dev_kfree_skb(self->ctrl_skb);
+		self->ctrl_skb = NULL;
+	}
+
+	/* Free transmit buffer */
+	if (self->tx_skb) {
+		dev_kfree_skb(self->tx_skb);
+		self->tx_skb = NULL;
+	}
+
+	if (self->ircomm) {
+		ircomm_close(self->ircomm);
+		self->ircomm = NULL;
+	}
+
+	spin_unlock_irqrestore(&self->spinlock, flags);
+}
+
+/*
+ * Function ircomm_tty_hangup (tty)
+ *
+ *    This routine notifies the tty driver that it should hangup the tty
+ *    device.
+ * 
+ */
+static void ircomm_tty_hangup(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned long	flags;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	if (!tty)
+		return;
+
+	/* ircomm_tty_flush_buffer(tty); */
+	ircomm_tty_shutdown(self);
+
+	/* I guess we need to lock here - Jean II */
+	spin_lock_irqsave(&self->spinlock, flags);
+	self->flags &= ~ASYNC_NORMAL_ACTIVE;
+	self->tty = NULL;
+	self->open_count = 0;
+	spin_unlock_irqrestore(&self->spinlock, flags);
+
+	wake_up_interruptible(&self->open_wait);
+}
+
+/*
+ * Function ircomm_tty_send_xchar (tty, ch)
+ *
+ *    This routine is used to send a high-priority XON/XOFF character to
+ *    the device.
+ */
+static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch)
+{
+	IRDA_DEBUG(0, "%s(), not impl\n", __FUNCTION__ );
+}
+
+/*
+ * Function ircomm_tty_start (tty)
+ *
+ *    This routine notifies the tty driver that it resume sending
+ *    characters to the tty device.  
+ */
+void ircomm_tty_start(struct tty_struct *tty)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+	ircomm_flow_request(self->ircomm, FLOW_START);
+}
+
+/*
+ * Function ircomm_tty_stop (tty)
+ *
+ *     This routine notifies the tty driver that it should stop outputting
+ *     characters to the tty device. 
+ */
+static void ircomm_tty_stop(struct tty_struct *tty) 
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	ircomm_flow_request(self->ircomm, FLOW_STOP);
+}
+
+/*
+ * Function ircomm_check_modem_status (self)
+ *
+ *    Check for any changes in the DCE's line settings. This function should
+ *    be called whenever the dce parameter settings changes, to update the
+ *    flow control settings and other things
+ */
+void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self)
+{
+	struct tty_struct *tty;
+	int status;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	tty = self->tty;
+
+	status = self->settings.dce;
+
+	if (status & IRCOMM_DCE_DELTA_ANY) {
+		/*wake_up_interruptible(&self->delta_msr_wait);*/
+	}
+	if ((self->flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) {
+		IRDA_DEBUG(2, 
+			   "%s(), ircomm%d CD now %s...\n", __FUNCTION__ , self->line,
+			   (status & IRCOMM_CD) ? "on" : "off");
+
+		if (status & IRCOMM_CD) {
+			wake_up_interruptible(&self->open_wait);
+		} else {
+			IRDA_DEBUG(2, 
+				   "%s(), Doing serial hangup..\n", __FUNCTION__ );
+			if (tty)
+				tty_hangup(tty);
+
+			/* Hangup will remote the tty, so better break out */
+			return;
+		}
+	}
+	if (self->flags & ASYNC_CTS_FLOW) {
+		if (tty->hw_stopped) {
+			if (status & IRCOMM_CTS) {
+				IRDA_DEBUG(2, 
+					   "%s(), CTS tx start...\n", __FUNCTION__ );
+				tty->hw_stopped = 0;
+				
+				/* Wake up processes blocked on open */
+				wake_up_interruptible(&self->open_wait);
+
+				schedule_work(&self->tqueue);
+				return;
+			}
+		} else {
+			if (!(status & IRCOMM_CTS)) {
+				IRDA_DEBUG(2, 
+					   "%s(), CTS tx stop...\n", __FUNCTION__ );
+				tty->hw_stopped = 1;
+			}
+		}
+	}
+}
+
+/*
+ * Function ircomm_tty_data_indication (instance, sap, skb)
+ *
+ *    Handle incoming data, and deliver it to the line discipline
+ *
+ */
+static int ircomm_tty_data_indication(void *instance, void *sap,
+				      struct sk_buff *skb)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	if (!self->tty) {
+		IRDA_DEBUG(0, "%s(), no tty!\n", __FUNCTION__ );
+		return 0;
+	}
+
+	/* 
+	 * If we receive data when hardware is stopped then something is wrong.
+	 * We try to poll the peers line settings to check if we are up todate.
+	 * Devices like WinCE can do this, and since they don't send any 
+	 * params, we can just as well declare the hardware for running.
+	 */
+	if (self->tty->hw_stopped && (self->flow == FLOW_START)) {
+		IRDA_DEBUG(0, "%s(), polling for line settings!\n", __FUNCTION__ );
+		ircomm_param_request(self, IRCOMM_POLL, TRUE);
+
+		/* We can just as well declare the hardware for running */
+		ircomm_tty_send_initial_parameters(self);
+		ircomm_tty_link_established(self);
+	}
+
+	/* 
+	 * Just give it over to the line discipline. There is no need to
+	 * involve the flip buffers, since we are not running in an interrupt 
+	 * handler
+	 */
+	self->tty->ldisc.receive_buf(self->tty, skb->data, NULL, skb->len);
+
+	/* No need to kfree_skb - see ircomm_ttp_data_indication() */
+
+	return 0;
+}
+
+/*
+ * Function ircomm_tty_control_indication (instance, sap, skb)
+ *
+ *    Parse all incoming parameters (easy!)
+ *
+ */
+static int ircomm_tty_control_indication(void *instance, void *sap,
+					 struct sk_buff *skb)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	int clen;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	clen = skb->data[0];
+
+	irda_param_extract_all(self, skb->data+1, IRDA_MIN(skb->len-1, clen), 
+			       &ircomm_param_info);
+
+	/* No need to kfree_skb - see ircomm_control_indication() */
+
+	return 0;
+}
+
+/*
+ * Function ircomm_tty_flow_indication (instance, sap, cmd)
+ *
+ *    This function is called by IrTTP when it wants us to slow down the
+ *    transmission of data. We just mark the hardware as stopped, and wait
+ *    for IrTTP to notify us that things are OK again.
+ */
+static void ircomm_tty_flow_indication(void *instance, void *sap, 
+				       LOCAL_FLOW cmd)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	struct tty_struct *tty;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	tty = self->tty;
+
+	switch (cmd) {
+	case FLOW_START:
+		IRDA_DEBUG(2, "%s(), hw start!\n", __FUNCTION__ );
+		tty->hw_stopped = 0;
+
+		/* ircomm_tty_do_softint will take care of the rest */
+		schedule_work(&self->tqueue);
+		break;
+	default:  /* If we get here, something is very wrong, better stop */
+	case FLOW_STOP:
+		IRDA_DEBUG(2, "%s(), hw stopped!\n", __FUNCTION__ );
+		tty->hw_stopped = 1;
+		break;
+	}
+	self->flow = cmd;
+}
+
+static int ircomm_tty_line_info(struct ircomm_tty_cb *self, char *buf)
+{
+        int  ret=0;
+
+	ret += sprintf(buf+ret, "State: %s\n", ircomm_tty_state[self->state]);
+
+	ret += sprintf(buf+ret, "Service type: ");
+	if (self->service_type & IRCOMM_9_WIRE)
+		ret += sprintf(buf+ret, "9_WIRE");
+	else if (self->service_type & IRCOMM_3_WIRE)
+		ret += sprintf(buf+ret, "3_WIRE");
+	else if (self->service_type & IRCOMM_3_WIRE_RAW)
+		ret += sprintf(buf+ret, "3_WIRE_RAW");
+	else
+		ret += sprintf(buf+ret, "No common service type!\n");
+        ret += sprintf(buf+ret, "\n");
+
+	ret += sprintf(buf+ret, "Port name: %s\n", self->settings.port_name);
+
+	ret += sprintf(buf+ret, "DTE status: ");	
+        if (self->settings.dte & IRCOMM_RTS)
+                ret += sprintf(buf+ret, "RTS|");
+        if (self->settings.dte & IRCOMM_DTR)
+                ret += sprintf(buf+ret, "DTR|");
+	if (self->settings.dte)
+		ret--; /* remove the last | */
+        ret += sprintf(buf+ret, "\n");
+
+	ret += sprintf(buf+ret, "DCE status: ");
+        if (self->settings.dce & IRCOMM_CTS)
+                ret += sprintf(buf+ret, "CTS|");
+        if (self->settings.dce & IRCOMM_DSR)
+                ret += sprintf(buf+ret, "DSR|");
+        if (self->settings.dce & IRCOMM_CD)
+                ret += sprintf(buf+ret, "CD|");
+        if (self->settings.dce & IRCOMM_RI) 
+                ret += sprintf(buf+ret, "RI|");
+	if (self->settings.dce)
+		ret--; /* remove the last | */
+        ret += sprintf(buf+ret, "\n");
+
+	ret += sprintf(buf+ret, "Configuration: ");
+	if (!self->settings.null_modem)
+		ret += sprintf(buf+ret, "DTE <-> DCE\n");
+	else
+		ret += sprintf(buf+ret, 
+			       "DTE <-> DTE (null modem emulation)\n");
+
+	ret += sprintf(buf+ret, "Data rate: %d\n", self->settings.data_rate);
+
+	ret += sprintf(buf+ret, "Flow control: ");
+	if (self->settings.flow_control & IRCOMM_XON_XOFF_IN)
+		ret += sprintf(buf+ret, "XON_XOFF_IN|");
+	if (self->settings.flow_control & IRCOMM_XON_XOFF_OUT)
+		ret += sprintf(buf+ret, "XON_XOFF_OUT|");
+	if (self->settings.flow_control & IRCOMM_RTS_CTS_IN)
+		ret += sprintf(buf+ret, "RTS_CTS_IN|");
+	if (self->settings.flow_control & IRCOMM_RTS_CTS_OUT)
+		ret += sprintf(buf+ret, "RTS_CTS_OUT|");
+	if (self->settings.flow_control & IRCOMM_DSR_DTR_IN)
+		ret += sprintf(buf+ret, "DSR_DTR_IN|");
+	if (self->settings.flow_control & IRCOMM_DSR_DTR_OUT)
+		ret += sprintf(buf+ret, "DSR_DTR_OUT|");
+	if (self->settings.flow_control & IRCOMM_ENQ_ACK_IN)
+		ret += sprintf(buf+ret, "ENQ_ACK_IN|");
+	if (self->settings.flow_control & IRCOMM_ENQ_ACK_OUT)
+		ret += sprintf(buf+ret, "ENQ_ACK_OUT|");
+	if (self->settings.flow_control)
+		ret--; /* remove the last | */
+        ret += sprintf(buf+ret, "\n");
+
+	ret += sprintf(buf+ret, "Flags: ");
+	if (self->flags & ASYNC_CTS_FLOW)
+		ret += sprintf(buf+ret, "ASYNC_CTS_FLOW|");
+	if (self->flags & ASYNC_CHECK_CD)
+		ret += sprintf(buf+ret, "ASYNC_CHECK_CD|");
+	if (self->flags & ASYNC_INITIALIZED)
+		ret += sprintf(buf+ret, "ASYNC_INITIALIZED|");
+	if (self->flags & ASYNC_LOW_LATENCY)
+		ret += sprintf(buf+ret, "ASYNC_LOW_LATENCY|");
+	if (self->flags & ASYNC_CLOSING)
+		ret += sprintf(buf+ret, "ASYNC_CLOSING|");
+	if (self->flags & ASYNC_NORMAL_ACTIVE)
+		ret += sprintf(buf+ret, "ASYNC_NORMAL_ACTIVE|");
+	if (self->flags)
+		ret--; /* remove the last | */
+	ret += sprintf(buf+ret, "\n");
+
+	ret += sprintf(buf+ret, "Role: %s\n", self->client ? 
+		       "client" : "server");
+	ret += sprintf(buf+ret, "Open count: %d\n", self->open_count);
+	ret += sprintf(buf+ret, "Max data size: %d\n", self->max_data_size);
+	ret += sprintf(buf+ret, "Max header size: %d\n", self->max_header_size);
+		
+	if (self->tty)
+		ret += sprintf(buf+ret, "Hardware: %s\n", 
+			       self->tty->hw_stopped ? "Stopped" : "Running");
+
+        ret += sprintf(buf+ret, "\n");
+        return ret;
+}
+
+
+/*
+ * Function ircomm_tty_read_proc (buf, start, offset, len, eof, unused)
+ *
+ *    
+ *
+ */
+#ifdef CONFIG_PROC_FS
+static int ircomm_tty_read_proc(char *buf, char **start, off_t offset, int len,
+				int *eof, void *unused)
+{
+	struct ircomm_tty_cb *self;
+        int count = 0, l;
+        off_t begin = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ircomm_tty->hb_spinlock, flags);
+
+	self = (struct ircomm_tty_cb *) hashbin_get_first(ircomm_tty);
+	while ((self != NULL) && (count < 4000)) {
+		if (self->magic != IRCOMM_TTY_MAGIC)
+			break;
+
+                l = ircomm_tty_line_info(self, buf + count);
+                count += l;
+                if (count+begin > offset+len)
+                        goto done;
+                if (count+begin < offset) {
+                        begin += count;
+                        count = 0;
+                }
+				
+		self = (struct ircomm_tty_cb *) hashbin_get_next(ircomm_tty);
+        }
+        *eof = 1;
+done:
+	spin_unlock_irqrestore(&ircomm_tty->hb_spinlock, flags);
+
+        if (offset >= count+begin)
+                return 0;
+        *start = buf + (offset-begin);
+        return ((len < begin+count-offset) ? len : begin+count-offset);
+}
+#endif /* CONFIG_PROC_FS */
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("IrCOMM serial TTY driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(IRCOMM_TTY_MAJOR);
+
+module_init(ircomm_tty_init);
+module_exit(ircomm_tty_cleanup);
diff --git a/net/irda/ircomm/ircomm_tty_attach.c b/net/irda/ircomm/ircomm_tty_attach.c
new file mode 100644
index 00000000000..99f5eddbb4b
--- /dev/null
+++ b/net/irda/ircomm/ircomm_tty_attach.c
@@ -0,0 +1,1006 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty_attach.c
+ * Version:       
+ * Description:   Code for attaching the serial driver to IrCOMM
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Jun  5 17:42:00 1999
+ * Modified at:   Tue Jan  4 14:20:49 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/parameters.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_event.h>
+
+#include <net/irda/ircomm_tty.h>
+#include <net/irda/ircomm_tty_attach.h>
+
+static void ircomm_tty_ias_register(struct ircomm_tty_cb *self);
+static void ircomm_tty_discovery_indication(discinfo_t *discovery,
+					    DISCOVERY_MODE mode,
+					    void *priv);
+static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id, 
+					struct ias_value *value, void *priv);
+static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self,
+					    int timeout);
+static void ircomm_tty_watchdog_timer_expired(void *data);
+
+static int ircomm_tty_state_idle(struct ircomm_tty_cb *self, 
+				 IRCOMM_TTY_EVENT event, 
+				 struct sk_buff *skb, 
+				 struct ircomm_tty_info *info);
+static int ircomm_tty_state_search(struct ircomm_tty_cb *self, 
+				   IRCOMM_TTY_EVENT event, 
+				   struct sk_buff *skb, 
+				   struct ircomm_tty_info *info);
+static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self, 
+					     IRCOMM_TTY_EVENT event, 
+					     struct sk_buff *skb, 
+					     struct ircomm_tty_info *info);
+static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self, 
+					   IRCOMM_TTY_EVENT event, 
+					   struct sk_buff *skb, 
+					   struct ircomm_tty_info *info);
+static int ircomm_tty_state_setup(struct ircomm_tty_cb *self, 
+				  IRCOMM_TTY_EVENT event, 
+				  struct sk_buff *skb, 
+				  struct ircomm_tty_info *info);
+static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, 
+				  IRCOMM_TTY_EVENT event, 
+				  struct sk_buff *skb, 
+				  struct ircomm_tty_info *info);
+
+char *ircomm_tty_state[] = {
+	"IRCOMM_TTY_IDLE",
+	"IRCOMM_TTY_SEARCH",
+	"IRCOMM_TTY_QUERY_PARAMETERS",
+	"IRCOMM_TTY_QUERY_LSAP_SEL",
+	"IRCOMM_TTY_SETUP",
+	"IRCOMM_TTY_READY",
+	"*** ERROR *** ",
+};
+
+#ifdef CONFIG_IRDA_DEBUG
+static char *ircomm_tty_event[] = {
+	"IRCOMM_TTY_ATTACH_CABLE",
+	"IRCOMM_TTY_DETACH_CABLE",
+	"IRCOMM_TTY_DATA_REQUEST",
+	"IRCOMM_TTY_DATA_INDICATION",
+	"IRCOMM_TTY_DISCOVERY_REQUEST",
+	"IRCOMM_TTY_DISCOVERY_INDICATION",
+	"IRCOMM_TTY_CONNECT_CONFIRM",
+	"IRCOMM_TTY_CONNECT_INDICATION",
+	"IRCOMM_TTY_DISCONNECT_REQUEST",
+	"IRCOMM_TTY_DISCONNECT_INDICATION",
+	"IRCOMM_TTY_WD_TIMER_EXPIRED",
+	"IRCOMM_TTY_GOT_PARAMETERS",
+	"IRCOMM_TTY_GOT_LSAPSEL",
+	"*** ERROR ****",
+};
+#endif /* CONFIG_IRDA_DEBUG */
+
+static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
+		      struct sk_buff *skb, struct ircomm_tty_info *info) = 
+{
+	ircomm_tty_state_idle,
+	ircomm_tty_state_search,
+	ircomm_tty_state_query_parameters,
+	ircomm_tty_state_query_lsap_sel,
+	ircomm_tty_state_setup,
+	ircomm_tty_state_ready,
+};
+
+/*
+ * Function ircomm_tty_attach_cable (driver)
+ *
+ *    Try to attach cable (IrCOMM link). This function will only return
+ *    when the link has been connected, or if an error condition occurs. 
+ *    If success, the return value is the resulting service type.
+ */
+int ircomm_tty_attach_cable(struct ircomm_tty_cb *self)
+{
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+       	/* Check if somebody has already connected to us */
+	if (ircomm_is_connected(self->ircomm)) {
+		IRDA_DEBUG(0, "%s(), already connected!\n", __FUNCTION__ );
+		return 0;
+	}
+
+	/* Make sure nobody tries to write before the link is up */
+	self->tty->hw_stopped = 1;
+
+	ircomm_tty_ias_register(self);
+
+	ircomm_tty_do_event(self, IRCOMM_TTY_ATTACH_CABLE, NULL, NULL);
+
+	return 0;
+}
+
+/*
+ * Function ircomm_detach_cable (driver)
+ *
+ *    Detach cable, or cable has been detached by peer
+ *
+ */
+void ircomm_tty_detach_cable(struct ircomm_tty_cb *self)
+{
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	del_timer(&self->watchdog_timer);
+
+	/* Remove discovery handler */
+	if (self->ckey) {
+		irlmp_unregister_client(self->ckey);
+		self->ckey = NULL;
+	}
+	/* Remove IrCOMM hint bits */
+	if (self->skey) {
+		irlmp_unregister_service(self->skey);
+		self->skey = NULL;
+	}
+
+	if (self->iriap) { 
+		iriap_close(self->iriap);
+		self->iriap = NULL;
+	}
+
+	/* Remove LM-IAS object */
+	if (self->obj) {
+		irias_delete_object(self->obj);
+		self->obj = NULL;
+	}
+
+	ircomm_tty_do_event(self, IRCOMM_TTY_DETACH_CABLE, NULL, NULL);
+
+	/* Reset some values */
+	self->daddr = self->saddr = 0;
+	self->dlsap_sel = self->slsap_sel = 0;
+
+	memset(&self->settings, 0, sizeof(struct ircomm_params));
+}
+
+/*
+ * Function ircomm_tty_ias_register (self)
+ *
+ *    Register with LM-IAS depending on which service type we are
+ *
+ */
+static void ircomm_tty_ias_register(struct ircomm_tty_cb *self)
+{
+	__u8 oct_seq[6];
+	__u16 hints;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+	
+	/* Compute hint bits based on service */
+	hints = irlmp_service_to_hint(S_COMM);
+	if (self->service_type & IRCOMM_3_WIRE_RAW)
+		hints |= irlmp_service_to_hint(S_PRINTER);
+
+	/* Advertise IrCOMM hint bit in discovery */
+	if (!self->skey)
+		self->skey = irlmp_register_service(hints);
+	/* Set up a discovery handler */
+	if (!self->ckey)
+		self->ckey = irlmp_register_client(hints,
+						   ircomm_tty_discovery_indication,
+						   NULL, (void *) self);
+
+	/* If already done, no need to do it again */
+	if (self->obj)
+		return;
+
+	if (self->service_type & IRCOMM_3_WIRE_RAW) {
+		/* Register IrLPT with LM-IAS */
+		self->obj = irias_new_object("IrLPT", IAS_IRLPT_ID);
+		irias_add_integer_attrib(self->obj, "IrDA:IrLMP:LsapSel", 
+					 self->slsap_sel, IAS_KERNEL_ATTR);
+	} else {
+		/* Register IrCOMM with LM-IAS */
+		self->obj = irias_new_object("IrDA:IrCOMM", IAS_IRCOMM_ID);
+		irias_add_integer_attrib(self->obj, "IrDA:TinyTP:LsapSel", 
+					 self->slsap_sel, IAS_KERNEL_ATTR);
+		
+		/* Code the parameters into the buffer */
+		irda_param_pack(oct_seq, "bbbbbb", 
+				IRCOMM_SERVICE_TYPE, 1, self->service_type,
+				IRCOMM_PORT_TYPE,    1, IRCOMM_SERIAL);
+		
+		/* Register parameters with LM-IAS */
+		irias_add_octseq_attrib(self->obj, "Parameters", oct_seq, 6,
+					IAS_KERNEL_ATTR);
+	}
+	irias_insert_object(self->obj);
+}
+
+/*
+ * Function ircomm_tty_ias_unregister (self)
+ *
+ *    Remove our IAS object and client hook while connected.
+ *
+ */
+static void ircomm_tty_ias_unregister(struct ircomm_tty_cb *self)
+{
+	/* Remove LM-IAS object now so it is not reused.
+	 * IrCOMM deals very poorly with multiple incoming connections.
+	 * It should looks a lot more like IrNET, and "dup" a server TSAP
+	 * to the application TSAP (based on various rules).
+	 * This is a cheap workaround allowing multiple clients to
+	 * connect to us. It will not always work.
+	 * Each IrCOMM socket has an IAS entry. Incoming connection will
+	 * pick the first one found. So, when we are fully connected,
+	 * we remove our IAS entries so that the next IAS entry is used.
+	 * We do that for *both* client and server, because a server
+	 * can also create client instances.
+	 * Jean II */
+	if (self->obj) {
+		irias_delete_object(self->obj);
+		self->obj = NULL;
+	}
+
+#if 0
+	/* Remove discovery handler.
+	 * While we are connected, we no longer need to receive
+	 * discovery events. This would be the case if there is
+	 * multiple IrLAP interfaces. Jean II */
+	if (self->ckey) {
+		irlmp_unregister_client(self->ckey);
+		self->ckey = NULL;
+	}
+#endif
+}
+
+/*
+ * Function ircomm_send_initial_parameters (self)
+ *
+ *    Send initial parameters to the remote IrCOMM device. These parameters
+ *    must be sent before any data.
+ */
+int ircomm_tty_send_initial_parameters(struct ircomm_tty_cb *self)
+{
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (self->service_type & IRCOMM_3_WIRE_RAW) 
+		return 0;
+
+	/* 
+	 * Set default values, but only if the application for some reason 
+	 * haven't set them already
+	 */
+	IRDA_DEBUG(2, "%s(), data-rate = %d\n", __FUNCTION__ , 
+		   self->settings.data_rate);
+	if (!self->settings.data_rate)
+		self->settings.data_rate = 9600;
+	IRDA_DEBUG(2, "%s(), data-format = %d\n", __FUNCTION__ , 
+		   self->settings.data_format);
+	if (!self->settings.data_format)
+		self->settings.data_format = IRCOMM_WSIZE_8;  /* 8N1 */
+
+	IRDA_DEBUG(2, "%s(), flow-control = %d\n", __FUNCTION__ , 
+		   self->settings.flow_control);
+	/*self->settings.flow_control = IRCOMM_RTS_CTS_IN|IRCOMM_RTS_CTS_OUT;*/
+
+	/* Do not set delta values for the initial parameters */
+	self->settings.dte = IRCOMM_DTR | IRCOMM_RTS;
+
+	/* Only send service type parameter when we are the client */
+	if (self->client)
+		ircomm_param_request(self, IRCOMM_SERVICE_TYPE, FALSE);
+	ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE);
+	ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
+	
+	/* For a 3 wire service, we just flush the last parameter and return */
+	if (self->settings.service_type == IRCOMM_3_WIRE) {
+		ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE);
+		return 0;
+	}
+
+	/* Only 9-wire service types continue here */
+	ircomm_param_request(self, IRCOMM_FLOW_CONTROL, FALSE);
+#if 0
+	ircomm_param_request(self, IRCOMM_XON_XOFF, FALSE);
+	ircomm_param_request(self, IRCOMM_ENQ_ACK, FALSE);
+#endif	
+	/* Notify peer that we are ready to receive data */
+	ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	
+	return 0;
+}
+
+/*
+ * Function ircomm_tty_discovery_indication (discovery)
+ *
+ *    Remote device is discovered, try query the remote IAS to see which
+ *    device it is, and which services it has.
+ *
+ */
+static void ircomm_tty_discovery_indication(discinfo_t *discovery,
+					    DISCOVERY_MODE mode,
+					    void *priv)
+{
+	struct ircomm_tty_cb *self;
+	struct ircomm_tty_info info;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Important note :
+	 * We need to drop all passive discoveries.
+	 * The LSAP management of IrComm is deficient and doesn't deal
+	 * with the case of two instance connecting to each other
+	 * simultaneously (it will deadlock in LMP).
+	 * The proper fix would be to use the same technique as in IrNET,
+	 * to have one server socket and separate instances for the
+	 * connecting/connected socket.
+	 * The workaround is to drop passive discovery, which drastically
+	 * reduce the probability of this happening.
+	 * Jean II */
+	if(mode == DISCOVERY_PASSIVE)
+		return;
+
+	info.daddr = discovery->daddr;
+	info.saddr = discovery->saddr;
+
+	/* FIXME. We have a locking problem on the hashbin here.
+	 * We probably need to use hashbin_find_next(), but we first
+	 * need to ensure that "line" is unique. - Jean II */
+	self = (struct ircomm_tty_cb *) hashbin_get_first(ircomm_tty);
+	while (self != NULL) {
+		IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+		
+		ircomm_tty_do_event(self, IRCOMM_TTY_DISCOVERY_INDICATION, 
+				    NULL, &info);
+
+		self = (struct ircomm_tty_cb *) hashbin_get_next(ircomm_tty);
+	}
+}
+
+/*
+ * Function ircomm_tty_disconnect_indication (instance, sap, reason, skb)
+ *
+ *    Link disconnected
+ *
+ */
+void ircomm_tty_disconnect_indication(void *instance, void *sap, 
+				      LM_REASON reason,
+				      struct sk_buff *skb)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	if (!self->tty)
+		return;
+
+	/* This will stop control data transfers */
+	self->flow = FLOW_STOP;
+
+	/* Stop data transfers */
+	self->tty->hw_stopped = 1;
+
+	ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL, 
+			    NULL);
+}
+
+/*
+ * Function ircomm_tty_getvalue_confirm (result, obj_id, value, priv)
+ *
+ *    Got result from the IAS query we make
+ *
+ */
+static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id, 
+					struct ias_value *value, 
+					void *priv)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) priv;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	/* We probably don't need to make any more queries */
+	iriap_close(self->iriap);
+	self->iriap = NULL;
+
+	/* Check if request succeeded */
+	if (result != IAS_SUCCESS) {
+		IRDA_DEBUG(4, "%s(), got NULL value!\n", __FUNCTION__ );
+		return;
+	}
+
+	switch (value->type) {
+ 	case IAS_OCT_SEQ:
+		IRDA_DEBUG(2, "%s(), got octet sequence\n", __FUNCTION__ );
+
+		irda_param_extract_all(self, value->t.oct_seq, value->len,
+				       &ircomm_param_info);
+
+		ircomm_tty_do_event(self, IRCOMM_TTY_GOT_PARAMETERS, NULL, 
+				    NULL);
+		break;
+	case IAS_INTEGER:
+		/* Got LSAP selector */	
+		IRDA_DEBUG(2, "%s(), got lsapsel = %d\n", __FUNCTION__ , 
+			   value->t.integer);
+
+		if (value->t.integer == -1) {
+			IRDA_DEBUG(0, "%s(), invalid value!\n", __FUNCTION__ );
+		} else
+			self->dlsap_sel = value->t.integer;
+
+		ircomm_tty_do_event(self, IRCOMM_TTY_GOT_LSAPSEL, NULL, NULL);
+		break;
+	case IAS_MISSING:
+		IRDA_DEBUG(0, "%s(), got IAS_MISSING\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), got unknown type!\n", __FUNCTION__ );
+		break;
+	}
+	irias_delete_value(value);
+}
+
+/*
+ * Function ircomm_tty_connect_confirm (instance, sap, qos, max_sdu_size, skb)
+ *
+ *    Connection confirmed
+ *
+ */
+void ircomm_tty_connect_confirm(void *instance, void *sap, 
+				struct qos_info *qos, 
+				__u32 max_data_size, 
+				__u8 max_header_size, 
+				struct sk_buff *skb)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	self->client = TRUE;
+	self->max_data_size = max_data_size;
+	self->max_header_size = max_header_size;
+	self->flow = FLOW_START;
+
+	ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_CONFIRM, NULL, NULL);
+
+	/* No need to kfree_skb - see ircomm_ttp_connect_confirm() */
+}
+
+/*
+ * Function ircomm_tty_connect_indication (instance, sap, qos, max_sdu_size, 
+ *                                         skb)
+ *
+ *    we are discovered and being requested to connect by remote device !
+ *
+ */
+void ircomm_tty_connect_indication(void *instance, void *sap, 
+				   struct qos_info *qos, 
+				   __u32 max_data_size,
+				   __u8 max_header_size, 
+				   struct sk_buff *skb)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance;
+	int clen;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	self->client = FALSE;
+	self->max_data_size = max_data_size;
+	self->max_header_size = max_header_size;
+	self->flow = FLOW_START;
+
+	clen = skb->data[0];
+	if (clen)
+		irda_param_extract_all(self, skb->data+1, 
+				       IRDA_MIN(skb->len, clen), 
+				       &ircomm_param_info);
+
+	ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_INDICATION, NULL, NULL);
+
+	/* No need to kfree_skb - see ircomm_ttp_connect_indication() */
+}
+
+/*
+ * Function ircomm_tty_link_established (self)
+ *
+ *    Called when the IrCOMM link is established
+ *
+ */
+void ircomm_tty_link_established(struct ircomm_tty_cb *self)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	if (!self->tty)
+		return;
+	
+	del_timer(&self->watchdog_timer);
+
+	/* 
+	 * IrCOMM link is now up, and if we are not using hardware
+	 * flow-control, then declare the hardware as running. Otherwise we
+	 * will have to wait for the peer device (DCE) to raise the CTS
+	 * line.  
+	 */
+	if ((self->flags & ASYNC_CTS_FLOW) && ((self->settings.dce & IRCOMM_CTS) == 0)) {
+		IRDA_DEBUG(0, "%s(), waiting for CTS ...\n", __FUNCTION__ );
+		return;
+	} else {
+		IRDA_DEBUG(1, "%s(), starting hardware!\n", __FUNCTION__ );
+
+		self->tty->hw_stopped = 0;
+	
+		/* Wake up processes blocked on open */
+		wake_up_interruptible(&self->open_wait);
+	}
+
+	schedule_work(&self->tqueue);
+}
+
+/*
+ * Function ircomm_tty_start_watchdog_timer (self, timeout)
+ *
+ *    Start the watchdog timer. This timer is used to make sure that any 
+ *    connection attempt is successful, and if not, we will retry after 
+ *    the timeout
+ */
+static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self,
+					    int timeout)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	irda_start_timer(&self->watchdog_timer, timeout, (void *) self,
+			 ircomm_tty_watchdog_timer_expired);
+}
+
+/*
+ * Function ircomm_tty_watchdog_timer_expired (data)
+ *
+ *    Called when the connect procedure have taken to much time.
+ *
+ */
+static void ircomm_tty_watchdog_timer_expired(void *data)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) data;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	ircomm_tty_do_event(self, IRCOMM_TTY_WD_TIMER_EXPIRED, NULL, NULL);
+}
+
+
+/*
+ * Function ircomm_tty_do_event (self, event, skb)
+ *
+ *    Process event
+ *
+ */
+int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event,
+			struct sk_buff *skb, struct ircomm_tty_info *info) 
+{
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	IRDA_DEBUG(2, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_tty_state[self->state], ircomm_tty_event[event]);
+	
+	return (*state[self->state])(self, event, skb, info);
+}
+
+/*
+ * Function ircomm_tty_next_state (self, state)
+ *
+ *    Switch state
+ *
+ */
+static inline void ircomm_tty_next_state(struct ircomm_tty_cb *self, IRCOMM_TTY_STATE state)
+{
+	/*
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;);
+
+	IRDA_DEBUG(2, "%s: next state=%s, service type=%d\n", __FUNCTION__ , 
+		   ircomm_tty_state[self->state], self->service_type);
+	*/
+	self->state = state;
+}
+
+/*
+ * Function ircomm_tty_state_idle (self, event, skb, info)
+ *
+ *    Just hanging around
+ *
+ */
+static int ircomm_tty_state_idle(struct ircomm_tty_cb *self, 
+				 IRCOMM_TTY_EVENT event, 
+				 struct sk_buff *skb, 
+				 struct ircomm_tty_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(2, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_tty_state[self->state], ircomm_tty_event[event]);
+	switch (event) {
+	case IRCOMM_TTY_ATTACH_CABLE:
+		/* Try to discover any remote devices */		
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+		
+		irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS);
+		break;
+	case IRCOMM_TTY_DISCOVERY_INDICATION:
+		self->daddr = info->daddr;
+		self->saddr = info->saddr;
+
+		if (self->iriap) {
+			IRDA_WARNING("%s(), busy with a previous query\n",
+				     __FUNCTION__);
+			return -EBUSY;
+		}
+
+		self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+					 ircomm_tty_getvalue_confirm);
+
+		iriap_getvaluebyclass_request(self->iriap,
+					      self->saddr, self->daddr,
+					      "IrDA:IrCOMM", "Parameters");
+		
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS);
+		break;
+	case IRCOMM_TTY_CONNECT_INDICATION:
+		del_timer(&self->watchdog_timer);
+
+		/* Accept connection */
+		ircomm_connect_response(self->ircomm, NULL);
+		ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+		break;
+	case IRCOMM_TTY_WD_TIMER_EXPIRED:
+		/* Just stay idle */
+		break;
+	case IRCOMM_TTY_DETACH_CABLE:
+		ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_tty_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_tty_state_search (self, event, skb, info)
+ *
+ *    Trying to discover an IrCOMM device
+ *
+ */
+static int ircomm_tty_state_search(struct ircomm_tty_cb *self, 
+				   IRCOMM_TTY_EVENT event, 
+				   struct sk_buff *skb, 
+				   struct ircomm_tty_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(2, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+	switch (event) {
+	case IRCOMM_TTY_DISCOVERY_INDICATION:
+		self->daddr = info->daddr;
+		self->saddr = info->saddr;
+
+		if (self->iriap) {
+			IRDA_WARNING("%s(), busy with a previous query\n",
+				     __FUNCTION__);
+			return -EBUSY;
+		}
+		
+		self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+					 ircomm_tty_getvalue_confirm);
+		
+		if (self->service_type == IRCOMM_3_WIRE_RAW) {
+			iriap_getvaluebyclass_request(self->iriap, self->saddr,
+						      self->daddr, "IrLPT", 
+						      "IrDA:IrLMP:LsapSel");
+			ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL);
+		} else {
+			iriap_getvaluebyclass_request(self->iriap, self->saddr,
+						      self->daddr, 
+						      "IrDA:IrCOMM", 
+						      "Parameters");
+
+			ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS);
+		}
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		break;
+	case IRCOMM_TTY_CONNECT_INDICATION:
+		del_timer(&self->watchdog_timer);
+		ircomm_tty_ias_unregister(self);
+
+		/* Accept connection */
+		ircomm_connect_response(self->ircomm, NULL);
+		ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+		break;
+	case IRCOMM_TTY_WD_TIMER_EXPIRED:
+#if 1
+		/* Give up */
+#else
+		/* Try to discover any remote devices */		
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS);
+#endif
+		break;
+	case IRCOMM_TTY_DETACH_CABLE:
+		ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_tty_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_tty_state_query (self, event, skb, info)
+ *
+ *    Querying the remote LM-IAS for IrCOMM parameters
+ *
+ */
+static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self, 
+					     IRCOMM_TTY_EVENT event, 
+					     struct sk_buff *skb, 
+					     struct ircomm_tty_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(2, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+	switch (event) {
+	case IRCOMM_TTY_GOT_PARAMETERS:
+		if (self->iriap) {
+			IRDA_WARNING("%s(), busy with a previous query\n",
+				     __FUNCTION__);
+			return -EBUSY;
+		}
+		
+		self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+					 ircomm_tty_getvalue_confirm);
+
+		iriap_getvaluebyclass_request(self->iriap, self->saddr, 
+					      self->daddr, "IrDA:IrCOMM", 
+					      "IrDA:TinyTP:LsapSel");
+
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL);
+		break;
+	case IRCOMM_TTY_WD_TIMER_EXPIRED:
+		/* Go back to search mode */
+		ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+		ircomm_tty_start_watchdog_timer(self, 3*HZ); 
+		break;
+	case IRCOMM_TTY_CONNECT_INDICATION:
+		del_timer(&self->watchdog_timer);
+		ircomm_tty_ias_unregister(self);
+
+		/* Accept connection */
+		ircomm_connect_response(self->ircomm, NULL);
+		ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+		break;
+	case IRCOMM_TTY_DETACH_CABLE:
+		ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_tty_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_tty_state_query_lsap_sel (self, event, skb, info)
+ *
+ *    Query remote LM-IAS for the LSAP selector which we can connect to
+ *
+ */
+static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self, 
+					   IRCOMM_TTY_EVENT event, 
+					   struct sk_buff *skb, 
+					   struct ircomm_tty_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(2, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+	switch (event) {
+	case IRCOMM_TTY_GOT_LSAPSEL:
+		/* Connect to remote device */
+		ret = ircomm_connect_request(self->ircomm, self->dlsap_sel,
+					     self->saddr, self->daddr, 
+					     NULL, self->service_type);
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		ircomm_tty_next_state(self, IRCOMM_TTY_SETUP);
+		break;
+	case IRCOMM_TTY_WD_TIMER_EXPIRED:
+		/* Go back to search mode */
+		ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		break;
+	case IRCOMM_TTY_CONNECT_INDICATION:
+		del_timer(&self->watchdog_timer);
+		ircomm_tty_ias_unregister(self);
+
+		/* Accept connection */
+		ircomm_connect_response(self->ircomm, NULL);
+		ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+		break;
+	case IRCOMM_TTY_DETACH_CABLE:
+		ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_tty_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_tty_state_setup (self, event, skb, info)
+ *
+ *    Trying to connect
+ *
+ */
+static int ircomm_tty_state_setup(struct ircomm_tty_cb *self, 
+				  IRCOMM_TTY_EVENT event, 
+				  struct sk_buff *skb, 
+				  struct ircomm_tty_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(2, "%s: state=%s, event=%s\n", __FUNCTION__ ,
+		   ircomm_tty_state[self->state], ircomm_tty_event[event]);
+
+	switch (event) {
+	case IRCOMM_TTY_CONNECT_CONFIRM:
+		del_timer(&self->watchdog_timer);
+		ircomm_tty_ias_unregister(self);
+		
+		/* 
+		 * Send initial parameters. This will also send out queued
+		 * parameters waiting for the connection to come up 
+		 */
+		ircomm_tty_send_initial_parameters(self);
+		ircomm_tty_link_established(self);
+		ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+		break;
+	case IRCOMM_TTY_CONNECT_INDICATION:
+		del_timer(&self->watchdog_timer);
+		ircomm_tty_ias_unregister(self);
+		
+		/* Accept connection */
+		ircomm_connect_response(self->ircomm, NULL);
+		ircomm_tty_next_state(self, IRCOMM_TTY_READY);
+		break;
+	case IRCOMM_TTY_WD_TIMER_EXPIRED:
+		/* Go back to search mode */
+		ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+		break;
+	case IRCOMM_TTY_DETACH_CABLE:
+		/* ircomm_disconnect_request(self->ircomm, NULL); */
+		ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_tty_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/*
+ * Function ircomm_tty_state_ready (self, event, skb, info)
+ *
+ *    IrCOMM is now connected
+ *
+ */
+static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, 
+				  IRCOMM_TTY_EVENT event, 
+				  struct sk_buff *skb, 
+				  struct ircomm_tty_info *info)
+{
+	int ret = 0;
+
+	switch (event) {
+	case IRCOMM_TTY_DATA_REQUEST:
+		ret = ircomm_data_request(self->ircomm, skb);
+		break;		
+	case IRCOMM_TTY_DETACH_CABLE:
+		ircomm_disconnect_request(self->ircomm, NULL);
+		ircomm_tty_next_state(self, IRCOMM_TTY_IDLE);
+		break;
+	case IRCOMM_TTY_DISCONNECT_INDICATION:
+		ircomm_tty_ias_register(self);
+		ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH);
+		ircomm_tty_start_watchdog_timer(self, 3*HZ);
+
+		if (self->flags & ASYNC_CHECK_CD) {
+			/* Drop carrier */
+			self->settings.dce = IRCOMM_DELTA_CD;
+			ircomm_tty_check_modem_status(self);
+		} else {
+			IRDA_DEBUG(0, "%s(), hanging up!\n", __FUNCTION__ );
+			if (self->tty)
+				tty_hangup(self->tty);
+		}
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown event: %s\n", __FUNCTION__ ,
+			   ircomm_tty_event[event]);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
diff --git a/net/irda/ircomm/ircomm_tty_ioctl.c b/net/irda/ircomm/ircomm_tty_ioctl.c
new file mode 100644
index 00000000000..197e3e7ed7e
--- /dev/null
+++ b/net/irda/ircomm/ircomm_tty_ioctl.c
@@ -0,0 +1,428 @@
+/*********************************************************************
+ *                
+ * Filename:      ircomm_tty_ioctl.c
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Jun 10 14:39:09 1999
+ * Modified at:   Wed Jan  5 14:45:43 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+
+#include <asm/uaccess.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+
+#include <net/irda/ircomm_core.h>
+#include <net/irda/ircomm_param.h>
+#include <net/irda/ircomm_tty_attach.h>
+#include <net/irda/ircomm_tty.h>
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/*
+ * Function ircomm_tty_change_speed (driver)
+ *
+ *    Change speed of the driver. If the remote device is a DCE, then this
+ *    should make it change the speed of its serial port
+ */
+static void ircomm_tty_change_speed(struct ircomm_tty_cb *self)
+{
+	unsigned cflag, cval;
+	int baud;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if (!self->tty || !self->tty->termios || !self->ircomm)
+		return;
+
+	cflag = self->tty->termios->c_cflag;
+
+	/*  byte size and parity */
+	switch (cflag & CSIZE) {
+	case CS5: cval = IRCOMM_WSIZE_5; break;
+	case CS6: cval = IRCOMM_WSIZE_6; break;
+	case CS7: cval = IRCOMM_WSIZE_7; break;
+	case CS8: cval = IRCOMM_WSIZE_8; break;
+	default:  cval = IRCOMM_WSIZE_5; break;
+	}
+	if (cflag & CSTOPB)
+		cval |= IRCOMM_2_STOP_BIT;
+	
+	if (cflag & PARENB)
+		cval |= IRCOMM_PARITY_ENABLE;
+	if (!(cflag & PARODD))
+		cval |= IRCOMM_PARITY_EVEN;
+
+	/* Determine divisor based on baud rate */
+	baud = tty_get_baud_rate(self->tty);
+	if (!baud)
+		baud = 9600;	/* B0 transition handled in rs_set_termios */
+
+	self->settings.data_rate = baud;
+	ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE);
+	
+	/* CTS flow control flag and modem status interrupts */
+	if (cflag & CRTSCTS) {
+		self->flags |= ASYNC_CTS_FLOW;
+		self->settings.flow_control |= IRCOMM_RTS_CTS_IN;
+		/* This got me. Bummer. Jean II */
+		if (self->service_type == IRCOMM_3_WIRE_RAW)
+			IRDA_WARNING("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", __FUNCTION__);
+	} else {
+		self->flags &= ~ASYNC_CTS_FLOW;
+		self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN;
+	}
+	if (cflag & CLOCAL)
+		self->flags &= ~ASYNC_CHECK_CD;
+	else
+		self->flags |= ASYNC_CHECK_CD;
+#if 0	
+	/*
+	 * Set up parity check flag
+	 */
+
+	if (I_INPCK(self->tty))
+		driver->read_status_mask |= LSR_FE | LSR_PE;
+	if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty))
+		driver->read_status_mask |= LSR_BI;
+	
+	/*
+	 * Characters to ignore
+	 */
+	driver->ignore_status_mask = 0;
+	if (I_IGNPAR(driver->tty))
+		driver->ignore_status_mask |= LSR_PE | LSR_FE;
+
+	if (I_IGNBRK(self->tty)) {
+		self->ignore_status_mask |= LSR_BI;
+		/*
+		 * If we're ignore parity and break indicators, ignore 
+		 * overruns too. (For real raw support).
+		 */
+		if (I_IGNPAR(self->tty)) 
+			self->ignore_status_mask |= LSR_OE;
+	}
+#endif
+	self->settings.data_format = cval;
+
+	ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE);
+ 	ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE);
+}
+
+/*
+ * Function ircomm_tty_set_termios (tty, old_termios)
+ *
+ *    This routine allows the tty driver to be notified when device's
+ *    termios settings have changed.  Note that a well-designed tty driver
+ *    should be prepared to accept the case where old == NULL, and try to
+ *    do something rational.
+ */
+void ircomm_tty_set_termios(struct tty_struct *tty, 
+			    struct termios *old_termios)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned int cflag = tty->termios->c_cflag;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if ((cflag == old_termios->c_cflag) && 
+	    (RELEVANT_IFLAG(tty->termios->c_iflag) == 
+	     RELEVANT_IFLAG(old_termios->c_iflag)))
+	{
+		return;
+	}
+
+	ircomm_tty_change_speed(self);
+
+	/* Handle transition to B0 status */
+	if ((old_termios->c_cflag & CBAUD) &&
+	    !(cflag & CBAUD)) {
+		self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS);
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	}
+	
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    (cflag & CBAUD)) {
+		self->settings.dte |= IRCOMM_DTR;
+		if (!(tty->termios->c_cflag & CRTSCTS) || 
+		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			self->settings.dte |= IRCOMM_RTS;
+		}
+		ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	}
+	
+	/* Handle turning off CRTSCTS */
+	if ((old_termios->c_cflag & CRTSCTS) &&
+	    !(tty->termios->c_cflag & CRTSCTS)) 
+	{
+		tty->hw_stopped = 0;
+		ircomm_tty_start(tty);
+	}
+}
+
+/*
+ * Function ircomm_tty_tiocmget (tty, file)
+ *
+ *    
+ *
+ */
+int ircomm_tty_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	unsigned int result;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+
+	result =  ((self->settings.dte & IRCOMM_RTS) ? TIOCM_RTS : 0)
+		| ((self->settings.dte & IRCOMM_DTR) ? TIOCM_DTR : 0)
+		| ((self->settings.dce & IRCOMM_CD)  ? TIOCM_CAR : 0)
+		| ((self->settings.dce & IRCOMM_RI)  ? TIOCM_RNG : 0)
+		| ((self->settings.dce & IRCOMM_DSR) ? TIOCM_DSR : 0)
+		| ((self->settings.dce & IRCOMM_CTS) ? TIOCM_CTS : 0);
+	return result;
+}
+
+/*
+ * Function ircomm_tty_tiocmset (tty, file, set, clear)
+ *
+ *    
+ *
+ */
+int ircomm_tty_tiocmset(struct tty_struct *tty, struct file *file,
+			unsigned int set, unsigned int clear)
+{ 
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;);
+
+	if (set & TIOCM_RTS)
+		self->settings.dte |= IRCOMM_RTS;
+	if (set & TIOCM_DTR)
+		self->settings.dte |= IRCOMM_DTR;
+
+	if (clear & TIOCM_RTS)
+		self->settings.dte &= ~IRCOMM_RTS;
+	if (clear & TIOCM_DTR)
+		self->settings.dte &= ~IRCOMM_DTR;
+
+	if ((set|clear) & TIOCM_RTS)
+		self->settings.dte |= IRCOMM_DELTA_RTS;
+	if ((set|clear) & TIOCM_DTR)
+		self->settings.dte |= IRCOMM_DELTA_DTR;
+
+	ircomm_param_request(self, IRCOMM_DTE, TRUE);
+	
+	return 0;
+}
+
+/*
+ * Function get_serial_info (driver, retinfo)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self,
+				      struct serial_struct __user *retinfo)
+{
+	struct serial_struct info;
+   
+	if (!retinfo)
+		return -EFAULT;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	memset(&info, 0, sizeof(info));
+	info.line = self->line;
+	info.flags = self->flags;
+	info.baud_base = self->settings.data_rate;
+	info.close_delay = self->close_delay;
+	info.closing_wait = self->closing_wait;
+
+	/* For compatibility  */
+ 	info.type = PORT_16550A;
+ 	info.port = 0;
+ 	info.irq = 0;
+	info.xmit_fifo_size = 0;
+	info.hub6 = 0;   
+	info.custom_divisor = 0;
+
+	if (copy_to_user(retinfo, &info, sizeof(*retinfo)))
+		return -EFAULT;
+
+	return 0;
+}
+
+/*
+ * Function set_serial_info (driver, new_info)
+ *
+ *    
+ *
+ */
+static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self,
+				      struct serial_struct __user *new_info)
+{
+#if 0
+	struct serial_struct new_serial;
+	struct ircomm_tty_cb old_state, *state;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+
+	if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+		return -EFAULT;
+
+
+	state = self
+	old_state = *self;
+  
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((new_serial.baud_base != state->settings.data_rate) ||
+		    (new_serial.close_delay != state->close_delay) ||
+		    ((new_serial.flags & ~ASYNC_USR_MASK) !=
+		     (self->flags & ~ASYNC_USR_MASK)))
+			return -EPERM;
+		state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+				 (new_serial.flags & ASYNC_USR_MASK));
+		self->flags = ((self->flags & ~ASYNC_USR_MASK) |
+			       (new_serial.flags & ASYNC_USR_MASK));
+		/* self->custom_divisor = new_serial.custom_divisor; */
+		goto check_and_exit;
+	}
+
+	/*
+	 * OK, past this point, all the error checking has been done.
+	 * At this point, we start making changes.....
+	 */
+
+	if (self->settings.data_rate != new_serial.baud_base) {
+		self->settings.data_rate = new_serial.baud_base;
+		ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE);
+	}
+
+	self->close_delay = new_serial.close_delay * HZ/100;
+	self->closing_wait = new_serial.closing_wait * HZ/100;
+	/* self->custom_divisor = new_serial.custom_divisor; */
+
+	self->flags = ((self->flags & ~ASYNC_FLAGS) |
+		       (new_serial.flags & ASYNC_FLAGS));
+	self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ check_and_exit:
+
+	if (self->flags & ASYNC_INITIALIZED) {
+		if (((old_state.flags & ASYNC_SPD_MASK) !=
+		     (self->flags & ASYNC_SPD_MASK)) ||
+		    (old_driver.custom_divisor != driver->custom_divisor)) {
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+				driver->tty->alt_speed = 57600;
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+				driver->tty->alt_speed = 115200;
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+				driver->tty->alt_speed = 230400;
+			if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+				driver->tty->alt_speed = 460800;
+			ircomm_tty_change_speed(driver);
+		}
+	}
+#endif
+	return 0;
+}
+
+/*
+ * Function ircomm_tty_ioctl (tty, file, cmd, arg)
+ *
+ *    
+ *
+ */
+int ircomm_tty_ioctl(struct tty_struct *tty, struct file *file, 
+		     unsigned int cmd, unsigned long arg)
+{
+	struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data;
+	int ret = 0;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		ret = ircomm_tty_get_serial_info(self, (struct serial_struct __user *) arg);
+		break;
+	case TIOCSSERIAL:
+		ret = ircomm_tty_set_serial_info(self, (struct serial_struct __user *) arg);
+		break;
+	case TIOCMIWAIT:
+		IRDA_DEBUG(0, "(), TIOCMIWAIT, not impl!\n");
+		break;
+
+	case TIOCGICOUNT:
+		IRDA_DEBUG(0, "%s(), TIOCGICOUNT not impl!\n", __FUNCTION__ );
+#if 0
+		save_flags(flags); cli();
+		cnow = driver->icount;
+		restore_flags(flags);
+		p_cuser = (struct serial_icounter_struct __user *) arg;
+		if (put_user(cnow.cts, &p_cuser->cts) ||
+		    put_user(cnow.dsr, &p_cuser->dsr) ||
+		    put_user(cnow.rng, &p_cuser->rng) ||
+		    put_user(cnow.dcd, &p_cuser->dcd) ||
+		    put_user(cnow.rx, &p_cuser->rx) ||
+		    put_user(cnow.tx, &p_cuser->tx) ||
+		    put_user(cnow.frame, &p_cuser->frame) ||
+		    put_user(cnow.overrun, &p_cuser->overrun) ||
+		    put_user(cnow.parity, &p_cuser->parity) ||
+		    put_user(cnow.brk, &p_cuser->brk) ||
+		    put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
+			return -EFAULT;
+#endif		
+		return 0;
+	default:
+		ret = -ENOIOCTLCMD;  /* ioctls which we must ignore */
+	}
+	return ret;
+}
+
+
+
diff --git a/net/irda/irda_device.c b/net/irda/irda_device.c
new file mode 100644
index 00000000000..fda299e300c
--- /dev/null
+++ b/net/irda/irda_device.c
@@ -0,0 +1,489 @@
+/*********************************************************************
+ *
+ * Filename:      irda_device.c
+ * Version:       0.9
+ * Description:   Utility functions used by the device drivers
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Oct  9 09:22:27 1999
+ * Modified at:   Sun Jan 23 17:41:24 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program; if not, write to the Free Software
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *     MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/kmod.h>
+#include <linux/spinlock.h>
+
+#include <asm/ioctls.h>
+#include <asm/uaccess.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+
+#include <net/irda/irda_device.h>
+#include <net/irda/irlap.h>
+#include <net/irda/timer.h>
+#include <net/irda/wrapper.h>
+
+static void __irda_task_delete(struct irda_task *task);
+
+static hashbin_t *dongles = NULL;
+static hashbin_t *tasks = NULL;
+
+#ifdef CONFIG_IRDA_DEBUG
+static const char *task_state[] = {
+	"IRDA_TASK_INIT",
+	"IRDA_TASK_DONE",
+	"IRDA_TASK_WAIT",
+	"IRDA_TASK_WAIT1",
+	"IRDA_TASK_WAIT2",
+	"IRDA_TASK_WAIT3",
+	"IRDA_TASK_CHILD_INIT",
+	"IRDA_TASK_CHILD_WAIT",
+	"IRDA_TASK_CHILD_DONE",
+};
+#endif	/* CONFIG_IRDA_DEBUG */
+
+static void irda_task_timer_expired(void *data);
+
+int __init irda_device_init( void)
+{
+	dongles = hashbin_new(HB_NOLOCK);
+	if (dongles == NULL) {
+		IRDA_WARNING("IrDA: Can't allocate dongles hashbin!\n");
+		return -ENOMEM;
+	}
+	spin_lock_init(&dongles->hb_spinlock);
+
+	tasks = hashbin_new(HB_LOCK);
+	if (tasks == NULL) {
+		IRDA_WARNING("IrDA: Can't allocate tasks hashbin!\n");
+		hashbin_delete(dongles, NULL);
+		return -ENOMEM;
+	}
+
+	/* We no longer initialise the driver ourselves here, we let
+	 * the system do it for us... - Jean II */
+
+	return 0;
+}
+
+static void __exit leftover_dongle(void *arg)
+{
+	struct dongle_reg *reg = arg;
+	IRDA_WARNING("IrDA: Dongle type %x not unregistered\n",
+		     reg->type);
+}
+
+void __exit irda_device_cleanup(void)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	hashbin_delete(tasks, (FREE_FUNC) __irda_task_delete);
+
+	hashbin_delete(dongles, leftover_dongle);
+}
+
+/*
+ * Function irda_device_set_media_busy (self, status)
+ *
+ *    Called when we have detected that another station is transmitting
+ *    in contention mode.
+ */
+void irda_device_set_media_busy(struct net_device *dev, int status)
+{
+	struct irlap_cb *self;
+
+	IRDA_DEBUG(4, "%s(%s)\n", __FUNCTION__, status ? "TRUE" : "FALSE");
+
+	self = (struct irlap_cb *) dev->atalk_ptr;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	if (status) {
+		self->media_busy = TRUE;
+		if (status == SMALL)
+			irlap_start_mbusy_timer(self, SMALLBUSY_TIMEOUT);
+		else
+			irlap_start_mbusy_timer(self, MEDIABUSY_TIMEOUT);
+		IRDA_DEBUG( 4, "Media busy!\n");
+	} else {
+		self->media_busy = FALSE;
+		irlap_stop_mbusy_timer(self);
+	}
+}
+EXPORT_SYMBOL(irda_device_set_media_busy);
+
+
+/*
+ * Function irda_device_is_receiving (dev)
+ *
+ *    Check if the device driver is currently receiving data
+ *
+ */
+int irda_device_is_receiving(struct net_device *dev)
+{
+	struct if_irda_req req;
+	int ret;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	if (!dev->do_ioctl) {
+		IRDA_ERROR("%s: do_ioctl not impl. by device driver\n",
+			   __FUNCTION__);
+		return -1;
+	}
+
+	ret = dev->do_ioctl(dev, (struct ifreq *) &req, SIOCGRECEIVING);
+	if (ret < 0)
+		return ret;
+
+	return req.ifr_receiving;
+}
+
+void irda_task_next_state(struct irda_task *task, IRDA_TASK_STATE state)
+{
+	IRDA_DEBUG(2, "%s(), state = %s\n", __FUNCTION__, task_state[state]);
+
+	task->state = state;
+}
+EXPORT_SYMBOL(irda_task_next_state);
+
+static void __irda_task_delete(struct irda_task *task)
+{
+	del_timer(&task->timer);
+
+	kfree(task);
+}
+
+void irda_task_delete(struct irda_task *task)
+{
+	/* Unregister task */
+	hashbin_remove(tasks, (long) task, NULL);
+
+	__irda_task_delete(task);
+}
+EXPORT_SYMBOL(irda_task_delete);
+
+/*
+ * Function irda_task_kick (task)
+ *
+ *    Tries to execute a task possible multiple times until the task is either
+ *    finished, or askes for a timeout. When a task is finished, we do post
+ *    processing, and notify the parent task, that is waiting for this task
+ *    to complete.
+ */
+static int irda_task_kick(struct irda_task *task)
+{
+	int finished = TRUE;
+	int count = 0;
+	int timeout;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(task != NULL, return -1;);
+	IRDA_ASSERT(task->magic == IRDA_TASK_MAGIC, return -1;);
+
+	/* Execute task until it's finished, or askes for a timeout */
+	do {
+		timeout = task->function(task);
+		if (count++ > 100) {
+			IRDA_ERROR("%s: error in task handler!\n",
+				   __FUNCTION__);
+			irda_task_delete(task);
+			return TRUE;
+		}
+	} while ((timeout == 0) && (task->state != IRDA_TASK_DONE));
+
+	if (timeout < 0) {
+		IRDA_ERROR("%s: Error executing task!\n", __FUNCTION__);
+		irda_task_delete(task);
+		return TRUE;
+	}
+
+	/* Check if we are finished */
+	if (task->state == IRDA_TASK_DONE) {
+		del_timer(&task->timer);
+
+		/* Do post processing */
+		if (task->finished)
+			task->finished(task);
+
+		/* Notify parent */
+		if (task->parent) {
+			/* Check if parent is waiting for us to complete */
+			if (task->parent->state == IRDA_TASK_CHILD_WAIT) {
+				task->parent->state = IRDA_TASK_CHILD_DONE;
+
+				/* Stop timer now that we are here */
+				del_timer(&task->parent->timer);
+
+				/* Kick parent task */
+				irda_task_kick(task->parent);
+			}
+		}
+		irda_task_delete(task);
+	} else if (timeout > 0) {
+		irda_start_timer(&task->timer, timeout, (void *) task,
+				 irda_task_timer_expired);
+		finished = FALSE;
+	} else {
+		IRDA_DEBUG(0, "%s(), not finished, and no timeout!\n",
+			   __FUNCTION__);
+		finished = FALSE;
+	}
+
+	return finished;
+}
+
+/*
+ * Function irda_task_execute (instance, function, finished)
+ *
+ *    This function registers and tries to execute tasks that may take some
+ *    time to complete. We do it this hairy way since we may have been
+ *    called from interrupt context, so it's not possible to use
+ *    schedule_timeout()
+ * Two important notes :
+ *	o Make sure you irda_task_delete(task); in case you delete the
+ *	  calling instance.
+ *	o No real need to lock when calling this function, but you may
+ *	  want to lock within the task handler.
+ * Jean II
+ */
+struct irda_task *irda_task_execute(void *instance,
+				    IRDA_TASK_CALLBACK function,
+				    IRDA_TASK_CALLBACK finished,
+				    struct irda_task *parent, void *param)
+{
+	struct irda_task *task;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	task = kmalloc(sizeof(struct irda_task), GFP_ATOMIC);
+	if (!task)
+		return NULL;
+
+	task->state    = IRDA_TASK_INIT;
+	task->instance = instance;
+	task->function = function;
+	task->finished = finished;
+	task->parent   = parent;
+	task->param    = param;
+	task->magic    = IRDA_TASK_MAGIC;
+
+	init_timer(&task->timer);
+
+	/* Register task */
+	hashbin_insert(tasks, (irda_queue_t *) task, (long) task, NULL);
+
+	/* No time to waste, so lets get going! */
+	return irda_task_kick(task) ? NULL : task;
+}
+EXPORT_SYMBOL(irda_task_execute);
+
+/*
+ * Function irda_task_timer_expired (data)
+ *
+ *    Task time has expired. We now try to execute task (again), and restart
+ *    the timer if the task has not finished yet
+ */
+static void irda_task_timer_expired(void *data)
+{
+	struct irda_task *task;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	task = (struct irda_task *) data;
+
+	irda_task_kick(task);
+}
+
+/*
+ * Function irda_device_setup (dev)
+ *
+ *    This function should be used by low level device drivers in a similar way
+ *    as ether_setup() is used by normal network device drivers
+ */
+static void irda_device_setup(struct net_device *dev)
+{
+        dev->hard_header_len = 0;
+        dev->addr_len        = 0;
+
+        dev->type            = ARPHRD_IRDA;
+        dev->tx_queue_len    = 8; /* Window size + 1 s-frame */
+
+	memset(dev->broadcast, 0xff, 4);
+
+	dev->mtu = 2048;
+	dev->flags = IFF_NOARP;
+}
+
+/*
+ * Funciton  alloc_irdadev 
+ * 	Allocates and sets up an IRDA device in a manner similar to
+ * 	alloc_etherdev.
+ */
+struct net_device *alloc_irdadev(int sizeof_priv)
+{
+	return alloc_netdev(sizeof_priv, "irda%d", irda_device_setup);
+}
+EXPORT_SYMBOL(alloc_irdadev);
+
+/*
+ * Function irda_device_init_dongle (self, type, qos)
+ *
+ *    Initialize attached dongle.
+ *
+ * Important : request_module require us to call this function with
+ * a process context and irq enabled. - Jean II
+ */
+dongle_t *irda_device_dongle_init(struct net_device *dev, int type)
+{
+	struct dongle_reg *reg;
+	dongle_t *dongle = NULL;
+
+	might_sleep();
+
+	spin_lock(&dongles->hb_spinlock);
+	reg = hashbin_find(dongles, type, NULL);
+
+#ifdef CONFIG_KMOD
+	/* Try to load the module needed */
+	if (!reg && capable(CAP_SYS_MODULE)) {
+		spin_unlock(&dongles->hb_spinlock);
+	
+		request_module("irda-dongle-%d", type);
+		
+		spin_lock(&dongles->hb_spinlock);
+		reg = hashbin_find(dongles, type, NULL);
+	}
+#endif
+
+	if (!reg || !try_module_get(reg->owner) ) {
+		IRDA_ERROR("IrDA: Unable to find requested dongle type %x\n",
+			   type);
+		goto out;
+	}
+
+	/* Allocate dongle info for this instance */
+	dongle = kmalloc(sizeof(dongle_t), GFP_KERNEL);
+	if (!dongle)
+		goto out;
+
+	memset(dongle, 0, sizeof(dongle_t));
+
+	/* Bind the registration info to this particular instance */
+	dongle->issue = reg;
+	dongle->dev = dev;
+
+ out:
+	spin_unlock(&dongles->hb_spinlock);
+	return dongle;
+}
+EXPORT_SYMBOL(irda_device_dongle_init);
+
+/*
+ * Function irda_device_dongle_cleanup (dongle)
+ */
+int irda_device_dongle_cleanup(dongle_t *dongle)
+{
+	IRDA_ASSERT(dongle != NULL, return -1;);
+
+	dongle->issue->close(dongle);
+	module_put(dongle->issue->owner);
+	kfree(dongle);
+
+	return 0;
+}
+EXPORT_SYMBOL(irda_device_dongle_cleanup);
+
+/*
+ * Function irda_device_register_dongle (dongle)
+ */
+int irda_device_register_dongle(struct dongle_reg *new)
+{
+	spin_lock(&dongles->hb_spinlock);
+	/* Check if this dongle has been registered before */
+	if (hashbin_find(dongles, new->type, NULL)) {
+		IRDA_MESSAGE("%s: Dongle type %x already registered\n", 
+			     __FUNCTION__, new->type);
+        } else {
+		/* Insert IrDA dongle into hashbin */
+		hashbin_insert(dongles, (irda_queue_t *) new, new->type, NULL);
+	}
+	spin_unlock(&dongles->hb_spinlock);
+
+        return 0;
+}
+EXPORT_SYMBOL(irda_device_register_dongle);
+
+/*
+ * Function irda_device_unregister_dongle (dongle)
+ *
+ *    Unregister dongle, and remove dongle from list of registered dongles
+ *
+ */
+void irda_device_unregister_dongle(struct dongle_reg *dongle)
+{
+	struct dongle *node;
+
+	spin_lock(&dongles->hb_spinlock);
+	node = hashbin_remove(dongles, dongle->type, NULL);
+	if (!node) 
+		IRDA_ERROR("%s: dongle not found!\n", __FUNCTION__);
+	spin_unlock(&dongles->hb_spinlock);
+}
+EXPORT_SYMBOL(irda_device_unregister_dongle);
+
+#ifdef CONFIG_ISA
+/*
+ * Function setup_dma (idev, buffer, count, mode)
+ *
+ *    Setup the DMA channel. Commonly used by ISA FIR drivers
+ *
+ */
+void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode)
+{
+	unsigned long flags;
+
+	flags = claim_dma_lock();
+
+	disable_dma(channel);
+	clear_dma_ff(channel);
+	set_dma_mode(channel, mode);
+	set_dma_addr(channel, buffer);
+	set_dma_count(channel, count);
+	enable_dma(channel);
+
+	release_dma_lock(flags);
+}
+EXPORT_SYMBOL(irda_setup_dma);
+#endif
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
new file mode 100644
index 00000000000..b8bb78af8b8
--- /dev/null
+++ b/net/irda/iriap.c
@@ -0,0 +1,1089 @@
+/*********************************************************************
+ *
+ * Filename:      iriap.c
+ * Version:       0.8
+ * Description:   Information Access Protocol (IAP)
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Aug 21 00:02:07 1997
+ * Modified at:   Sat Dec 25 16:42:42 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/iriap_event.h>
+#include <net/irda/iriap.h>
+
+#ifdef CONFIG_IRDA_DEBUG
+/* FIXME: This one should go in irlmp.c */
+static const char *ias_charset_types[] = {
+	"CS_ASCII",
+	"CS_ISO_8859_1",
+	"CS_ISO_8859_2",
+	"CS_ISO_8859_3",
+	"CS_ISO_8859_4",
+	"CS_ISO_8859_5",
+	"CS_ISO_8859_6",
+	"CS_ISO_8859_7",
+	"CS_ISO_8859_8",
+	"CS_ISO_8859_9",
+	"CS_UNICODE"
+};
+#endif	/* CONFIG_IRDA_DEBUG */
+
+static hashbin_t *iriap = NULL;
+static void *service_handle;
+
+static void __iriap_close(struct iriap_cb *self);
+static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode);
+static void iriap_disconnect_indication(void *instance, void *sap,
+					LM_REASON reason, struct sk_buff *skb);
+static void iriap_connect_indication(void *instance, void *sap,
+				     struct qos_info *qos, __u32 max_sdu_size,
+				     __u8 max_header_size,
+				     struct sk_buff *skb);
+static void iriap_connect_confirm(void *instance, void *sap,
+				  struct qos_info *qos,
+				  __u32 max_sdu_size, __u8 max_header_size,
+				  struct sk_buff *skb);
+static int iriap_data_indication(void *instance, void *sap,
+				 struct sk_buff *skb);
+
+static void iriap_watchdog_timer_expired(void *data);
+
+static inline void iriap_start_watchdog_timer(struct iriap_cb *self, 
+					      int timeout) 
+{
+	irda_start_timer(&self->watchdog_timer, timeout, self, 
+			 iriap_watchdog_timer_expired);
+}
+
+/*
+ * Function iriap_init (void)
+ *
+ *    Initializes the IrIAP layer, called by the module initialization code
+ *    in irmod.c
+ */
+int __init iriap_init(void)
+{
+	struct ias_object *obj;
+	struct iriap_cb *server;
+	__u8 oct_seq[6];
+	__u16 hints;
+
+	/* Allocate master array */
+	iriap = hashbin_new(HB_LOCK);
+	if (!iriap)
+		return -ENOMEM;
+
+	/* Object repository - defined in irias_object.c */
+	irias_objects = hashbin_new(HB_LOCK);
+	if (!irias_objects) {
+		IRDA_WARNING("%s: Can't allocate irias_objects hashbin!\n",
+			     __FUNCTION__);
+		hashbin_delete(iriap, NULL);
+		return -ENOMEM;
+	}
+
+	/*
+	 *  Register some default services for IrLMP
+	 */
+	hints  = irlmp_service_to_hint(S_COMPUTER);
+	service_handle = irlmp_register_service(hints);
+
+	/* Register the Device object with LM-IAS */
+	obj = irias_new_object("Device", IAS_DEVICE_ID);
+	irias_add_string_attrib(obj, "DeviceName", "Linux", IAS_KERNEL_ATTR);
+
+	oct_seq[0] = 0x01;  /* Version 1 */
+	oct_seq[1] = 0x00;  /* IAS support bits */
+	oct_seq[2] = 0x00;  /* LM-MUX support bits */
+#ifdef CONFIG_IRDA_ULTRA
+	oct_seq[2] |= 0x04; /* Connectionless Data support */
+#endif
+	irias_add_octseq_attrib(obj, "IrLMPSupport", oct_seq, 3,
+				IAS_KERNEL_ATTR);
+	irias_insert_object(obj);
+
+	/*
+	 *  Register server support with IrLMP so we can accept incoming
+	 *  connections
+	 */
+	server = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL);
+	if (!server) {
+		IRDA_DEBUG(0, "%s(), unable to open server\n", __FUNCTION__);
+		return -1;
+	}
+	iriap_register_lsap(server, LSAP_IAS, IAS_SERVER);
+
+	return 0;
+}
+
+/*
+ * Function iriap_cleanup (void)
+ *
+ *    Initializes the IrIAP layer, called by the module cleanup code in
+ *    irmod.c
+ */
+void __exit iriap_cleanup(void)
+{
+	irlmp_unregister_service(service_handle);
+
+	hashbin_delete(iriap, (FREE_FUNC) __iriap_close);
+	hashbin_delete(irias_objects, (FREE_FUNC) __irias_delete_object);
+}
+
+/*
+ * Function iriap_open (void)
+ *
+ *    Opens an instance of the IrIAP layer, and registers with IrLMP
+ */
+struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv,
+			    CONFIRM_CALLBACK callback)
+{
+	struct iriap_cb *self;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	self = kmalloc(sizeof(struct iriap_cb), GFP_ATOMIC);
+	if (!self) {
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+
+	/*
+	 *  Initialize instance
+	 */
+	memset(self, 0, sizeof(struct iriap_cb));
+
+	self->magic = IAS_MAGIC;
+	self->mode = mode;
+	if (mode == IAS_CLIENT)
+		iriap_register_lsap(self, slsap_sel, mode);
+
+	self->confirm = callback;
+	self->priv = priv;
+
+	/* iriap_getvaluebyclass_request() will construct packets before
+	 * we connect, so this must have a sane value... Jean II */
+	self->max_header_size = LMP_MAX_HEADER;
+
+	init_timer(&self->watchdog_timer);
+
+	hashbin_insert(iriap, (irda_queue_t *) self, (long) self, NULL);
+
+	/* Initialize state machines */
+	iriap_next_client_state(self, S_DISCONNECT);
+	iriap_next_call_state(self, S_MAKE_CALL);
+	iriap_next_server_state(self, R_DISCONNECT);
+	iriap_next_r_connect_state(self, R_WAITING);
+
+	return self;
+}
+EXPORT_SYMBOL(iriap_open);
+
+/*
+ * Function __iriap_close (self)
+ *
+ *    Removes (deallocates) the IrIAP instance
+ *
+ */
+static void __iriap_close(struct iriap_cb *self)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	del_timer(&self->watchdog_timer);
+
+	if (self->request_skb)
+		dev_kfree_skb(self->request_skb);
+
+	self->magic = 0;
+
+	kfree(self);
+}
+
+/*
+ * Function iriap_close (void)
+ *
+ *    Closes IrIAP and deregisters with IrLMP
+ */
+void iriap_close(struct iriap_cb *self)
+{
+	struct iriap_cb *entry;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	if (self->lsap) {
+		irlmp_close_lsap(self->lsap);
+		self->lsap = NULL;
+	}
+
+	entry = (struct iriap_cb *) hashbin_remove(iriap, (long) self, NULL);
+	IRDA_ASSERT(entry == self, return;);
+
+	__iriap_close(self);
+}
+EXPORT_SYMBOL(iriap_close);
+
+static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode)
+{
+	notify_t notify;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	irda_notify_init(&notify);
+	notify.connect_confirm       = iriap_connect_confirm;
+	notify.connect_indication    = iriap_connect_indication;
+	notify.disconnect_indication = iriap_disconnect_indication;
+	notify.data_indication       = iriap_data_indication;
+	notify.instance = self;
+	if (mode == IAS_CLIENT)
+		strcpy(notify.name, "IrIAS cli");
+	else
+		strcpy(notify.name, "IrIAS srv");
+
+	self->lsap = irlmp_open_lsap(slsap_sel, &notify, 0);
+	if (self->lsap == NULL) {
+		IRDA_ERROR("%s: Unable to allocated LSAP!\n", __FUNCTION__);
+		return -1;
+	}
+	self->slsap_sel = self->lsap->slsap_sel;
+
+	return 0;
+}
+
+/*
+ * Function iriap_disconnect_indication (handle, reason)
+ *
+ *    Got disconnect, so clean up everything associated with this connection
+ *
+ */
+static void iriap_disconnect_indication(void *instance, void *sap,
+					LM_REASON reason,
+					struct sk_buff *skb)
+{
+	struct iriap_cb *self;
+
+	IRDA_DEBUG(4, "%s(), reason=%s\n", __FUNCTION__, irlmp_reasons[reason]);
+
+	self = (struct iriap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	IRDA_ASSERT(iriap != NULL, return;);
+
+	del_timer(&self->watchdog_timer);
+
+	/* Not needed */
+	if (skb)
+		dev_kfree_skb(skb);
+
+	if (self->mode == IAS_CLIENT) {
+		IRDA_DEBUG(4, "%s(), disconnect as client\n", __FUNCTION__);
+
+
+		iriap_do_client_event(self, IAP_LM_DISCONNECT_INDICATION,
+				      NULL);
+		/*
+		 * Inform service user that the request failed by sending
+		 * it a NULL value. Warning, the client might close us, so
+		 * remember no to use self anymore after calling confirm
+		 */
+		if (self->confirm)
+			self->confirm(IAS_DISCONNECT, 0, NULL, self->priv);
+	} else {
+		IRDA_DEBUG(4, "%s(), disconnect as server\n", __FUNCTION__);
+		iriap_do_server_event(self, IAP_LM_DISCONNECT_INDICATION,
+				      NULL);
+		iriap_close(self);
+	}
+}
+
+/*
+ * Function iriap_disconnect_request (handle)
+ */
+static void iriap_disconnect_request(struct iriap_cb *self)
+{
+	struct sk_buff *tx_skb;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	tx_skb = dev_alloc_skb(64);
+	if (tx_skb == NULL) {
+		IRDA_DEBUG(0, "%s(), Could not allocate an sk_buff of length %d\n", 
+			__FUNCTION__, 64);
+		return;
+	}
+
+	/*
+	 *  Reserve space for MUX control and LAP header
+	 */
+	skb_reserve(tx_skb, LMP_MAX_HEADER);
+
+	irlmp_disconnect_request(self->lsap, tx_skb);
+}
+
+/*
+ * Function iriap_getvaluebyclass (addr, name, attr)
+ *
+ *    Retreive all values from attribute in all objects with given class
+ *    name
+ */
+int iriap_getvaluebyclass_request(struct iriap_cb *self,
+				  __u32 saddr, __u32 daddr,
+				  char *name, char *attr)
+{
+	struct sk_buff *tx_skb;
+	int name_len, attr_len, skb_len;
+	__u8 *frame;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return -1;);
+
+	/* Client must supply the destination device address */
+	if (!daddr)
+		return -1;
+
+	self->daddr = daddr;
+	self->saddr = saddr;
+
+	/*
+	 *  Save operation, so we know what the later indication is about
+	 */
+	self->operation = GET_VALUE_BY_CLASS;
+
+	/* Give ourselves 10 secs to finish this operation */
+	iriap_start_watchdog_timer(self, 10*HZ);
+
+	name_len = strlen(name);	/* Up to IAS_MAX_CLASSNAME = 60 */
+	attr_len = strlen(attr);	/* Up to IAS_MAX_ATTRIBNAME = 60 */
+
+	skb_len = self->max_header_size+2+name_len+1+attr_len+4;
+	tx_skb = dev_alloc_skb(skb_len);
+	if (!tx_skb)
+		return -ENOMEM;
+
+	/* Reserve space for MUX and LAP header */
+	skb_reserve(tx_skb, self->max_header_size);
+	skb_put(tx_skb, 3+name_len+attr_len);
+	frame = tx_skb->data;
+
+	/* Build frame */
+	frame[0] = IAP_LST | GET_VALUE_BY_CLASS;
+	frame[1] = name_len;                       /* Insert length of name */
+	memcpy(frame+2, name, name_len);           /* Insert name */
+	frame[2+name_len] = attr_len;              /* Insert length of attr */
+	memcpy(frame+3+name_len, attr, attr_len);  /* Insert attr */
+
+	iriap_do_client_event(self, IAP_CALL_REQUEST_GVBC, tx_skb);
+
+	/* Drop reference count - see state_s_disconnect(). */
+	dev_kfree_skb(tx_skb);
+
+	return 0;
+}
+EXPORT_SYMBOL(iriap_getvaluebyclass_request);
+
+/*
+ * Function iriap_getvaluebyclass_confirm (self, skb)
+ *
+ *    Got result from GetValueByClass command. Parse it and return result
+ *    to service user.
+ *
+ */
+static void iriap_getvaluebyclass_confirm(struct iriap_cb *self,
+					  struct sk_buff *skb)
+{
+	struct ias_value *value;
+	int charset;
+	__u32 value_len;
+	__u32 tmp_cpu32;
+	__u16 obj_id;
+	__u16 len;
+	__u8  type;
+	__u8 *fp;
+	int n;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/* Initialize variables */
+	fp = skb->data;
+	n = 2;
+
+	/* Get length, MSB first */
+	len = be16_to_cpu(get_unaligned((__u16 *)(fp+n))); n += 2;
+
+	IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__, len);
+
+	/* Get object ID, MSB first */
+	obj_id = be16_to_cpu(get_unaligned((__u16 *)(fp+n))); n += 2;
+
+	type = fp[n++];
+	IRDA_DEBUG(4, "%s(), Value type = %d\n", __FUNCTION__, type);
+
+	switch (type) {
+	case IAS_INTEGER:
+		memcpy(&tmp_cpu32, fp+n, 4); n += 4;
+		be32_to_cpus(&tmp_cpu32);
+		value = irias_new_integer_value(tmp_cpu32);
+
+		/*  Legal values restricted to 0x01-0x6f, page 15 irttp */
+		IRDA_DEBUG(4, "%s(), lsap=%d\n", __FUNCTION__, value->t.integer);
+		break;
+	case IAS_STRING:
+		charset = fp[n++];
+
+		switch (charset) {
+		case CS_ASCII:
+			break;
+/*		case CS_ISO_8859_1: */
+/*		case CS_ISO_8859_2: */
+/*		case CS_ISO_8859_3: */
+/*		case CS_ISO_8859_4: */
+/*		case CS_ISO_8859_5: */
+/*		case CS_ISO_8859_6: */
+/*		case CS_ISO_8859_7: */
+/*		case CS_ISO_8859_8: */
+/*		case CS_ISO_8859_9: */
+/*		case CS_UNICODE: */
+		default:
+			IRDA_DEBUG(0, "%s(), charset %s, not supported\n",
+				   __FUNCTION__, ias_charset_types[charset]);
+
+			/* Aborting, close connection! */
+			iriap_disconnect_request(self);
+			return;
+			/* break; */
+		}
+		value_len = fp[n++];
+		IRDA_DEBUG(4, "%s(), strlen=%d\n", __FUNCTION__, value_len);
+
+		/* Make sure the string is null-terminated */
+		fp[n+value_len] = 0x00;
+		IRDA_DEBUG(4, "Got string %s\n", fp+n);
+
+		/* Will truncate to IAS_MAX_STRING bytes */
+		value = irias_new_string_value(fp+n);
+		break;
+	case IAS_OCT_SEQ:
+		value_len = be16_to_cpu(get_unaligned((__u16 *)(fp+n)));
+		n += 2;
+
+		/* Will truncate to IAS_MAX_OCTET_STRING bytes */
+		value = irias_new_octseq_value(fp+n, value_len);
+		break;
+	default:
+		value = irias_new_missing_value();
+		break;
+	}
+
+	/* Finished, close connection! */
+	iriap_disconnect_request(self);
+
+	/* Warning, the client might close us, so remember no to use self
+	 * anymore after calling confirm
+	 */
+	if (self->confirm)
+		self->confirm(IAS_SUCCESS, obj_id, value, self->priv);
+	else {
+		IRDA_DEBUG(0, "%s(), missing handler!\n", __FUNCTION__);
+		irias_delete_value(value);
+	}
+}
+
+/*
+ * Function iriap_getvaluebyclass_response ()
+ *
+ *    Send answer back to remote LM-IAS
+ *
+ */
+static void iriap_getvaluebyclass_response(struct iriap_cb *self,
+					   __u16 obj_id,
+					   __u8 ret_code,
+					   struct ias_value *value)
+{
+	struct sk_buff *tx_skb;
+	int n;
+	__u32 tmp_be32, tmp_be16;
+	__u8 *fp;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+	IRDA_ASSERT(value != NULL, return;);
+	IRDA_ASSERT(value->len <= 1024, return;);
+
+	/* Initialize variables */
+	n = 0;
+
+	/*
+	 *  We must adjust the size of the response after the length of the
+	 *  value. We add 32 bytes because of the 6 bytes for the frame and
+	 *  max 5 bytes for the value coding.
+	 */
+	tx_skb = dev_alloc_skb(value->len + self->max_header_size + 32);
+	if (!tx_skb)
+		return;
+
+	/* Reserve space for MUX and LAP header */
+	skb_reserve(tx_skb, self->max_header_size);
+	skb_put(tx_skb, 6);
+
+	fp = tx_skb->data;
+
+	/* Build frame */
+	fp[n++] = GET_VALUE_BY_CLASS | IAP_LST;
+	fp[n++] = ret_code;
+
+	/* Insert list length (MSB first) */
+	tmp_be16 = __constant_htons(0x0001);
+	memcpy(fp+n, &tmp_be16, 2);  n += 2;
+
+	/* Insert object identifier ( MSB first) */
+	tmp_be16 = cpu_to_be16(obj_id);
+	memcpy(fp+n, &tmp_be16, 2); n += 2;
+
+	switch (value->type) {
+	case IAS_STRING:
+		skb_put(tx_skb, 3 + value->len);
+		fp[n++] = value->type;
+		fp[n++] = 0; /* ASCII */
+		fp[n++] = (__u8) value->len;
+		memcpy(fp+n, value->t.string, value->len); n+=value->len;
+		break;
+	case IAS_INTEGER:
+		skb_put(tx_skb, 5);
+		fp[n++] = value->type;
+
+		tmp_be32 = cpu_to_be32(value->t.integer);
+		memcpy(fp+n, &tmp_be32, 4); n += 4;
+		break;
+	case IAS_OCT_SEQ:
+		skb_put(tx_skb, 3 + value->len);
+		fp[n++] = value->type;
+
+		tmp_be16 = cpu_to_be16(value->len);
+		memcpy(fp+n, &tmp_be16, 2); n += 2;
+		memcpy(fp+n, value->t.oct_seq, value->len); n+=value->len;
+		break;
+	case IAS_MISSING:
+		IRDA_DEBUG( 3, "%s: sending IAS_MISSING\n", __FUNCTION__);
+		skb_put(tx_skb, 1);
+		fp[n++] = value->type;
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), type not implemented!\n", __FUNCTION__);
+		break;
+	}
+	iriap_do_r_connect_event(self, IAP_CALL_RESPONSE, tx_skb);
+
+	/* Drop reference count - see state_r_execute(). */
+	dev_kfree_skb(tx_skb);
+}
+
+/*
+ * Function iriap_getvaluebyclass_indication (self, skb)
+ *
+ *    getvaluebyclass is requested from peer LM-IAS
+ *
+ */
+static void iriap_getvaluebyclass_indication(struct iriap_cb *self,
+					     struct sk_buff *skb)
+{
+	struct ias_object *obj;
+	struct ias_attrib *attrib;
+	int name_len;
+	int attr_len;
+	char name[IAS_MAX_CLASSNAME + 1];	/* 60 bytes */
+	char attr[IAS_MAX_ATTRIBNAME + 1];	/* 60 bytes */
+	__u8 *fp;
+	int n;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	fp = skb->data;
+	n = 1;
+
+	name_len = fp[n++];
+	memcpy(name, fp+n, name_len); n+=name_len;
+	name[name_len] = '\0';
+
+	attr_len = fp[n++];
+	memcpy(attr, fp+n, attr_len); n+=attr_len;
+	attr[attr_len] = '\0';
+
+	IRDA_DEBUG(4, "LM-IAS: Looking up %s: %s\n", name, attr);
+	obj = irias_find_object(name);
+
+	if (obj == NULL) {
+		IRDA_DEBUG(2, "LM-IAS: Object %s not found\n", name);
+		iriap_getvaluebyclass_response(self, 0x1235, IAS_CLASS_UNKNOWN,
+					       &irias_missing);
+		return;
+	}
+	IRDA_DEBUG(4, "LM-IAS: found %s, id=%d\n", obj->name, obj->id);
+
+	attrib = irias_find_attrib(obj, attr);
+	if (attrib == NULL) {
+		IRDA_DEBUG(2, "LM-IAS: Attribute %s not found\n", attr);
+		iriap_getvaluebyclass_response(self, obj->id,
+					       IAS_ATTRIB_UNKNOWN, 
+					       &irias_missing);
+		return;
+	}
+
+	/* We have a match; send the value.  */
+	iriap_getvaluebyclass_response(self, obj->id, IAS_SUCCESS,
+				       attrib->value);
+
+	return;
+}
+
+/*
+ * Function iriap_send_ack (void)
+ *
+ *    Currently not used
+ *
+ */
+void iriap_send_ack(struct iriap_cb *self)
+{
+	struct sk_buff *tx_skb;
+	__u8 *frame;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	tx_skb = dev_alloc_skb(64);
+	if (!tx_skb)
+		return;
+
+	/* Reserve space for MUX and LAP header */
+	skb_reserve(tx_skb, self->max_header_size);
+	skb_put(tx_skb, 1);
+	frame = tx_skb->data;
+
+	/* Build frame */
+	frame[0] = IAP_LST | IAP_ACK | self->operation;
+
+	irlmp_data_request(self->lsap, tx_skb);
+}
+
+void iriap_connect_request(struct iriap_cb *self)
+{
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	ret = irlmp_connect_request(self->lsap, LSAP_IAS,
+				    self->saddr, self->daddr,
+				    NULL, NULL);
+	if (ret < 0) {
+		IRDA_DEBUG(0, "%s(), connect failed!\n", __FUNCTION__);
+		self->confirm(IAS_DISCONNECT, 0, NULL, self->priv);
+	}
+}
+
+/*
+ * Function iriap_connect_confirm (handle, skb)
+ *
+ *    LSAP connection confirmed!
+ *
+ */
+static void iriap_connect_confirm(void *instance, void *sap,
+				  struct qos_info *qos, __u32 max_seg_size,
+				  __u8 max_header_size,
+				  struct sk_buff *skb)
+{
+	struct iriap_cb *self;
+
+	self = (struct iriap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	self->max_data_size = max_seg_size;
+	self->max_header_size = max_header_size;
+
+	del_timer(&self->watchdog_timer);
+
+	iriap_do_client_event(self, IAP_LM_CONNECT_CONFIRM, skb);
+
+	/* Drop reference count - see state_s_make_call(). */
+	dev_kfree_skb(skb);
+}
+
+/*
+ * Function iriap_connect_indication ( handle, skb)
+ *
+ *    Remote LM-IAS is requesting connection
+ *
+ */
+static void iriap_connect_indication(void *instance, void *sap,
+				     struct qos_info *qos, __u32 max_seg_size,
+				     __u8 max_header_size,
+				     struct sk_buff *skb)
+{
+	struct iriap_cb *self, *new;
+
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	self = (struct iriap_cb *) instance;
+
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(self != NULL, goto out;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;);
+
+	/* Start new server */
+	new = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL);
+	if (!new) {
+		IRDA_DEBUG(0, "%s(), open failed\n", __FUNCTION__);
+		goto out;
+	}
+
+	/* Now attach up the new "socket" */
+	new->lsap = irlmp_dup(self->lsap, new);
+	if (!new->lsap) {
+		IRDA_DEBUG(0, "%s(), dup failed!\n", __FUNCTION__);
+		goto out;
+	}
+
+	new->max_data_size = max_seg_size;
+	new->max_header_size = max_header_size;
+
+	/* Clean up the original one to keep it in listen state */
+	irlmp_listen(self->lsap);
+
+	iriap_do_server_event(new, IAP_LM_CONNECT_INDICATION, skb);
+
+out:
+	/* Drop reference count - see state_r_disconnect(). */
+	dev_kfree_skb(skb);
+}
+
+/*
+ * Function iriap_data_indication (handle, skb)
+ *
+ *    Receives data from connection identified by handle from IrLMP
+ *
+ */
+static int iriap_data_indication(void *instance, void *sap,
+				 struct sk_buff *skb)
+{
+	struct iriap_cb *self;
+	__u8  *frame;
+	__u8  opcode;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	self = (struct iriap_cb *) instance;
+
+	IRDA_ASSERT(skb != NULL, return 0;);
+	IRDA_ASSERT(self != NULL, goto out;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;);
+
+	frame = skb->data;
+
+	if (self->mode == IAS_SERVER) {
+		/* Call server */
+		IRDA_DEBUG(4, "%s(), Calling server!\n", __FUNCTION__);
+		iriap_do_r_connect_event(self, IAP_RECV_F_LST, skb);
+		goto out;
+	}
+	opcode = frame[0];
+	if (~opcode & IAP_LST) {
+		IRDA_WARNING("%s:, IrIAS multiframe commands or "
+			     "results is not implemented yet!\n",
+			     __FUNCTION__);
+		goto out;
+	}
+
+	/* Check for ack frames since they don't contain any data */
+	if (opcode & IAP_ACK) {
+		IRDA_DEBUG(0, "%s() Got ack frame!\n", __FUNCTION__);
+		goto out;
+	}
+
+	opcode &= ~IAP_LST; /* Mask away LST bit */
+
+	switch (opcode) {
+	case GET_INFO_BASE:
+		IRDA_DEBUG(0, "IrLMP GetInfoBaseDetails not implemented!\n");
+		break;
+	case GET_VALUE_BY_CLASS:
+		iriap_do_call_event(self, IAP_RECV_F_LST, NULL);
+
+		switch (frame[1]) {
+		case IAS_SUCCESS:
+			iriap_getvaluebyclass_confirm(self, skb);
+			break;
+		case IAS_CLASS_UNKNOWN:
+			IRDA_DEBUG(1, "%s(), No such class!\n", __FUNCTION__);
+			/* Finished, close connection! */
+			iriap_disconnect_request(self);
+
+			/*
+			 * Warning, the client might close us, so remember
+			 * no to use self anymore after calling confirm
+			 */
+			if (self->confirm)
+				self->confirm(IAS_CLASS_UNKNOWN, 0, NULL,
+					      self->priv);
+			break;
+		case IAS_ATTRIB_UNKNOWN:
+			IRDA_DEBUG(1, "%s(), No such attribute!\n", __FUNCTION__);
+			/* Finished, close connection! */
+			iriap_disconnect_request(self);
+
+			/*
+			 * Warning, the client might close us, so remember
+			 * no to use self anymore after calling confirm
+			 */
+			if (self->confirm)
+				self->confirm(IAS_ATTRIB_UNKNOWN, 0, NULL,
+					      self->priv);
+			break;
+		}
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown op-code: %02x\n", __FUNCTION__,
+			   opcode);
+		break;
+	}
+
+out:
+	/* Cleanup - sub-calls will have done skb_get() as needed. */
+	dev_kfree_skb(skb);
+	return 0;
+}
+
+/*
+ * Function iriap_call_indication (self, skb)
+ *
+ *    Received call to server from peer LM-IAS
+ *
+ */
+void iriap_call_indication(struct iriap_cb *self, struct sk_buff *skb)
+{
+	__u8 *fp;
+	__u8 opcode;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	fp = skb->data;
+
+	opcode = fp[0];
+	if (~opcode & 0x80) {
+		IRDA_WARNING("%s: IrIAS multiframe commands or results"
+			     "is not implemented yet!\n", __FUNCTION__);
+		return;
+	}
+	opcode &= 0x7f; /* Mask away LST bit */
+
+	switch (opcode) {
+	case GET_INFO_BASE:
+		IRDA_WARNING("%s: GetInfoBaseDetails not implemented yet!\n",
+			     __FUNCTION__);
+		break;
+	case GET_VALUE_BY_CLASS:
+		iriap_getvaluebyclass_indication(self, skb);
+		break;
+	}
+	/* skb will be cleaned up in iriap_data_indication */
+}
+
+/*
+ * Function iriap_watchdog_timer_expired (data)
+ *
+ *    Query has taken too long time, so abort
+ *
+ */
+static void iriap_watchdog_timer_expired(void *data)
+{
+	struct iriap_cb *self = (struct iriap_cb *) data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	/* iriap_close(self); */
+}
+
+#ifdef CONFIG_PROC_FS
+
+static const char *ias_value_types[] = {
+	"IAS_MISSING",
+	"IAS_INTEGER",
+	"IAS_OCT_SEQ",
+	"IAS_STRING"
+};
+
+static inline struct ias_object *irias_seq_idx(loff_t pos) 
+{
+	struct ias_object *obj;
+
+	for (obj = (struct ias_object *) hashbin_get_first(irias_objects);
+	     obj; obj = (struct ias_object *) hashbin_get_next(irias_objects)) {
+		if (pos-- == 0)
+			break;
+	}
+		
+	return obj;
+}
+
+static void *irias_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	spin_lock_irq(&irias_objects->hb_spinlock);
+
+	return *pos ? irias_seq_idx(*pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *irias_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+
+	return (v == SEQ_START_TOKEN) 
+		? (void *) hashbin_get_first(irias_objects)
+		: (void *) hashbin_get_next(irias_objects);
+}
+
+static void irias_seq_stop(struct seq_file *seq, void *v)
+{
+	spin_unlock_irq(&irias_objects->hb_spinlock);
+}
+
+static int irias_seq_show(struct seq_file *seq, void *v)
+{
+	if (v == SEQ_START_TOKEN)
+		seq_puts(seq, "LM-IAS Objects:\n");
+	else {
+		struct ias_object *obj = v;
+		struct ias_attrib *attrib;
+
+		IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -EINVAL;);
+
+		seq_printf(seq, "name: %s, id=%d\n",
+			   obj->name, obj->id);
+
+		/* Careful for priority inversions here !
+		 * All other uses of attrib spinlock are independent of
+		 * the object spinlock, so we are safe. Jean II */
+		spin_lock(&obj->attribs->hb_spinlock);
+
+		/* List all attributes for this object */
+		for (attrib = (struct ias_attrib *) hashbin_get_first(obj->attribs);
+		     attrib != NULL;
+		     attrib = (struct ias_attrib *) hashbin_get_next(obj->attribs)) {
+		     
+			IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC,
+				    goto outloop; );
+
+			seq_printf(seq, " - Attribute name: \"%s\", ",
+				   attrib->name);
+			seq_printf(seq, "value[%s]: ",
+				   ias_value_types[attrib->value->type]);
+
+			switch (attrib->value->type) {
+			case IAS_INTEGER:
+				seq_printf(seq, "%d\n",
+					   attrib->value->t.integer);
+				break;
+			case IAS_STRING:
+				seq_printf(seq, "\"%s\"\n",
+					   attrib->value->t.string);
+				break;
+			case IAS_OCT_SEQ:
+				seq_printf(seq, "octet sequence (%d bytes)\n", 
+					   attrib->value->len);
+				break;
+			case IAS_MISSING:
+				seq_puts(seq, "missing\n");
+				break;
+			default:
+				seq_printf(seq, "type %d?\n", 
+					   attrib->value->type);
+			}
+			seq_putc(seq, '\n');
+
+		}
+	IRDA_ASSERT_LABEL(outloop:)
+		spin_unlock(&obj->attribs->hb_spinlock);
+	}
+
+	return 0;
+}
+
+static struct seq_operations irias_seq_ops = {
+	.start  = irias_seq_start,
+	.next   = irias_seq_next,
+	.stop   = irias_seq_stop,
+	.show   = irias_seq_show,
+};
+
+static int irias_seq_open(struct inode *inode, struct file *file)
+{
+	IRDA_ASSERT( irias_objects != NULL, return -EINVAL;);
+
+	return seq_open(file, &irias_seq_ops);
+}
+
+struct file_operations irias_seq_fops = {
+	.owner		= THIS_MODULE,
+	.open           = irias_seq_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release	= seq_release,
+};
+
+#endif /* PROC_FS */
diff --git a/net/irda/iriap_event.c b/net/irda/iriap_event.c
new file mode 100644
index 00000000000..a73607450de
--- /dev/null
+++ b/net/irda/iriap_event.c
@@ -0,0 +1,502 @@
+/*********************************************************************
+ *
+ * Filename:      iriap_event.c
+ * Version:       0.1
+ * Description:   IAP Finite State Machine
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Aug 21 00:02:07 1997
+ * Modified at:   Wed Mar  1 11:28:34 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1997, 1999-2000 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <net/irda/irda.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/iriap_event.h>
+
+static void state_s_disconnect   (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_connecting   (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_call         (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+
+static void state_s_make_call    (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_calling      (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_outstanding  (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_replying     (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_s_wait_active  (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+
+static void state_r_disconnect   (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_r_call         (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_r_waiting      (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_r_wait_active  (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_r_receiving    (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_r_execute      (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+static void state_r_returning    (struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb);
+
+static void (*iriap_state[])(struct iriap_cb *self, IRIAP_EVENT event,
+			     struct sk_buff *skb) = {
+	/* Client FSM */
+	state_s_disconnect,
+	state_s_connecting,
+	state_s_call,
+
+	/* S-Call FSM */
+	state_s_make_call,
+	state_s_calling,
+	state_s_outstanding,
+	state_s_replying,
+	state_s_wait_for_call,
+	state_s_wait_active,
+
+	/* Server FSM */
+	state_r_disconnect,
+	state_r_call,
+
+	/* R-Connect FSM */
+	state_r_waiting,
+	state_r_wait_active,
+	state_r_receiving,
+	state_r_execute,
+	state_r_returning,
+};
+
+void iriap_next_client_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	self->client_state = state;
+}
+
+void iriap_next_call_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	self->call_state = state;
+}
+
+void iriap_next_server_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	self->server_state = state;
+}
+
+void iriap_next_r_connect_state(struct iriap_cb *self, IRIAP_STATE state)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	self->r_connect_state = state;
+}
+
+void iriap_do_client_event(struct iriap_cb *self, IRIAP_EVENT event,
+			   struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	(*iriap_state[ self->client_state]) (self, event, skb);
+}
+
+void iriap_do_call_event(struct iriap_cb *self, IRIAP_EVENT event,
+			 struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	(*iriap_state[ self->call_state]) (self, event, skb);
+}
+
+void iriap_do_server_event(struct iriap_cb *self, IRIAP_EVENT event,
+			   struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	(*iriap_state[ self->server_state]) (self, event, skb);
+}
+
+void iriap_do_r_connect_event(struct iriap_cb *self, IRIAP_EVENT event,
+			      struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	(*iriap_state[ self->r_connect_state]) (self, event, skb);
+}
+
+
+/*
+ * Function state_s_disconnect (event, skb)
+ *
+ *    S-Disconnect, The device has no LSAP connection to a particular
+ *    remote device.
+ */
+static void state_s_disconnect(struct iriap_cb *self, IRIAP_EVENT event,
+			       struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	switch (event) {
+	case IAP_CALL_REQUEST_GVBC:
+		iriap_next_client_state(self, S_CONNECTING);
+		IRDA_ASSERT(self->request_skb == NULL, return;);
+		/* Don't forget to refcount it -
+		 * see iriap_getvaluebyclass_request(). */
+		skb_get(skb);
+		self->request_skb = skb;
+		iriap_connect_request(self);
+		break;
+	case IAP_LM_DISCONNECT_INDICATION:
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %d\n", __FUNCTION__, event);
+		break;
+	}
+}
+
+/*
+ * Function state_s_connecting (self, event, skb)
+ *
+ *    S-Connecting
+ *
+ */
+static void state_s_connecting(struct iriap_cb *self, IRIAP_EVENT event,
+			       struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	switch (event) {
+	case IAP_LM_CONNECT_CONFIRM:
+		/*
+		 *  Jump to S-Call FSM
+		 */
+		iriap_do_call_event(self, IAP_CALL_REQUEST, skb);
+		/* iriap_call_request(self, 0,0,0); */
+		iriap_next_client_state(self, S_CALL);
+		break;
+	case IAP_LM_DISCONNECT_INDICATION:
+		/* Abort calls */
+		iriap_next_call_state(self, S_MAKE_CALL);
+		iriap_next_client_state(self, S_DISCONNECT);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %d\n", __FUNCTION__, event);
+		break;
+	}
+}
+
+/*
+ * Function state_s_call (self, event, skb)
+ *
+ *    S-Call, The device can process calls to a specific remote
+ *    device. Whenever the LSAP connection is disconnected, this state
+ *    catches that event and clears up
+ */
+static void state_s_call(struct iriap_cb *self, IRIAP_EVENT event,
+			 struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+
+	switch (event) {
+	case IAP_LM_DISCONNECT_INDICATION:
+		/* Abort calls */
+		iriap_next_call_state(self, S_MAKE_CALL);
+		iriap_next_client_state(self, S_DISCONNECT);
+		break;
+	default:
+		IRDA_DEBUG(0, "state_s_call: Unknown event %d\n", event);
+		break;
+	}
+}
+
+/*
+ * Function state_s_make_call (event, skb)
+ *
+ *    S-Make-Call
+ *
+ */
+static void state_s_make_call(struct iriap_cb *self, IRIAP_EVENT event,
+			      struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb;
+
+	IRDA_ASSERT(self != NULL, return;);
+
+	switch (event) {
+	case IAP_CALL_REQUEST:
+		/* Already refcounted - see state_s_disconnect() */
+		tx_skb = self->request_skb;
+		self->request_skb = NULL;
+
+		irlmp_data_request(self->lsap, tx_skb);
+		iriap_next_call_state(self, S_OUTSTANDING);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %d\n", __FUNCTION__, event);
+		break;
+	}
+}
+
+/*
+ * Function state_s_calling (event, skb)
+ *
+ *    S-Calling
+ *
+ */
+static void state_s_calling(struct iriap_cb *self, IRIAP_EVENT event,
+			    struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), Not implemented\n", __FUNCTION__);
+}
+
+/*
+ * Function state_s_outstanding (event, skb)
+ *
+ *    S-Outstanding, The device is waiting for a response to a command
+ *
+ */
+static void state_s_outstanding(struct iriap_cb *self, IRIAP_EVENT event,
+				struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+
+	switch (event) {
+	case IAP_RECV_F_LST:
+		/*iriap_send_ack(self);*/
+		/*LM_Idle_request(idle); */
+
+		iriap_next_call_state(self, S_WAIT_FOR_CALL);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %d\n", __FUNCTION__, event);
+		break;
+	}
+}
+
+/*
+ * Function state_s_replying (event, skb)
+ *
+ *    S-Replying, The device is collecting a multiple part response
+ */
+static void state_s_replying(struct iriap_cb *self, IRIAP_EVENT event,
+			     struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), Not implemented\n", __FUNCTION__);
+}
+
+/*
+ * Function state_s_wait_for_call (event, skb)
+ *
+ *    S-Wait-for-Call
+ *
+ */
+static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event,
+				  struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), Not implemented\n", __FUNCTION__);
+}
+
+
+/*
+ * Function state_s_wait_active (event, skb)
+ *
+ *    S-Wait-Active
+ *
+ */
+static void state_s_wait_active(struct iriap_cb *self, IRIAP_EVENT event,
+				struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), Not implemented\n", __FUNCTION__);
+}
+
+/**************************************************************************
+ *
+ *  Server FSM
+ *
+ **************************************************************************/
+
+/*
+ * Function state_r_disconnect (self, event, skb)
+ *
+ *    LM-IAS server is disconnected (not processing any requests!)
+ *
+ */
+static void state_r_disconnect(struct iriap_cb *self, IRIAP_EVENT event,
+			       struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb;
+
+	switch (event) {
+	case IAP_LM_CONNECT_INDICATION:
+		tx_skb = dev_alloc_skb(64);
+		if (tx_skb == NULL) {
+			IRDA_WARNING("%s: unable to malloc!\n", __FUNCTION__);
+			return;
+		}
+
+		/* Reserve space for MUX_CONTROL and LAP header */
+		skb_reserve(tx_skb, LMP_MAX_HEADER);
+
+		irlmp_connect_response(self->lsap, tx_skb);
+		/*LM_Idle_request(idle); */
+
+		iriap_next_server_state(self, R_CALL);
+
+		/*
+		 *  Jump to R-Connect FSM, we skip R-Waiting since we do not
+		 *  care about LM_Idle_request()!
+		 */
+		iriap_next_r_connect_state(self, R_RECEIVING);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event %d\n", __FUNCTION__, event);
+		break;
+	}
+}
+
+/*
+ * Function state_r_call (self, event, skb)
+ */
+static void state_r_call(struct iriap_cb *self, IRIAP_EVENT event,
+			 struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	switch (event) {
+	case IAP_LM_DISCONNECT_INDICATION:
+		/* Abort call */
+		iriap_next_server_state(self, R_DISCONNECT);
+		iriap_next_r_connect_state(self, R_WAITING);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event!\n", __FUNCTION__);
+		break;
+	}
+}
+
+/*
+ *  R-Connect FSM
+ */
+
+/*
+ * Function state_r_waiting (self, event, skb)
+ */
+static void state_r_waiting(struct iriap_cb *self, IRIAP_EVENT event,
+			    struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), Not implemented\n", __FUNCTION__);
+}
+
+static void state_r_wait_active(struct iriap_cb *self, IRIAP_EVENT event,
+				struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), Not implemented\n", __FUNCTION__);
+}
+
+/*
+ * Function state_r_receiving (self, event, skb)
+ *
+ *    We are receiving a command
+ *
+ */
+static void state_r_receiving(struct iriap_cb *self, IRIAP_EVENT event,
+			      struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	switch (event) {
+	case IAP_RECV_F_LST:
+		iriap_next_r_connect_state(self, R_EXECUTE);
+
+		iriap_call_indication(self, skb);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event!\n", __FUNCTION__);
+		break;
+	}
+}
+
+/*
+ * Function state_r_execute (self, event, skb)
+ *
+ *    The server is processing the request
+ *
+ */
+static void state_r_execute(struct iriap_cb *self, IRIAP_EVENT event,
+			    struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IAS_MAGIC, return;);
+
+	switch (event) {
+	case IAP_CALL_RESPONSE:
+		/*
+		 *  Since we don't implement the Waiting state, we return
+		 *  to state Receiving instead, DB.
+		 */
+		iriap_next_r_connect_state(self, R_RECEIVING);
+
+		/* Don't forget to refcount it - see
+		 * iriap_getvaluebyclass_response(). */
+		skb_get(skb);
+
+		irlmp_data_request(self->lsap, skb);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), unknown event!\n", __FUNCTION__);
+		break;
+	}
+}
+
+static void state_r_returning(struct iriap_cb *self, IRIAP_EVENT event,
+			      struct sk_buff *skb)
+{
+	IRDA_DEBUG(0, "%s(), event=%d\n", __FUNCTION__, event);
+
+	switch (event) {
+	case IAP_RECV_F_LST:
+		break;
+	default:
+		break;
+	}
+}
diff --git a/net/irda/irias_object.c b/net/irda/irias_object.c
new file mode 100644
index 00000000000..6fec428b451
--- /dev/null
+++ b/net/irda/irias_object.c
@@ -0,0 +1,580 @@
+/*********************************************************************
+ *
+ * Filename:      irias_object.c
+ * Version:       0.3
+ * Description:   IAS object database and functions
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Oct  1 22:50:04 1998
+ * Modified at:   Wed Dec 15 11:23:16 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/string.h>
+#include <linux/socket.h>
+#include <linux/module.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irias_object.h>
+
+hashbin_t *irias_objects;
+
+/*
+ *  Used when a missing value needs to be returned
+ */
+struct ias_value irias_missing = { IAS_MISSING, 0, 0, 0, {0}};
+
+/*
+ * Function strndup (str, max)
+ *
+ *    My own kernel version of strndup!
+ *
+ * Faster, check boundary... Jean II
+ */
+static char *strndup(char *str, int max)
+{
+	char *new_str;
+	int len;
+
+	/* Check string */
+	if (str == NULL)
+		return NULL;
+	/* Check length, truncate */
+	len = strlen(str);
+	if(len > max)
+		len = max;
+
+	/* Allocate new string */
+        new_str = kmalloc(len + 1, GFP_ATOMIC);
+        if (new_str == NULL) {
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+
+	/* Copy and truncate */
+	memcpy(new_str, str, len);
+	new_str[len] = '\0';
+
+	return new_str;
+}
+
+/*
+ * Function ias_new_object (name, id)
+ *
+ *    Create a new IAS object
+ *
+ */
+struct ias_object *irias_new_object( char *name, int id)
+{
+        struct ias_object *obj;
+
+	IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+	obj = (struct ias_object *) kmalloc(sizeof(struct ias_object),
+					    GFP_ATOMIC);
+	if (obj == NULL) {
+		IRDA_WARNING("%s(), Unable to allocate object!\n",
+			     __FUNCTION__);
+		return NULL;
+	}
+	memset(obj, 0, sizeof( struct ias_object));
+
+	obj->magic = IAS_OBJECT_MAGIC;
+	obj->name = strndup(name, IAS_MAX_CLASSNAME);
+	obj->id = id;
+
+	/* Locking notes : the attrib spinlock has lower precendence
+	 * than the objects spinlock. Never grap the objects spinlock
+	 * while holding any attrib spinlock (risk of deadlock). Jean II */
+	obj->attribs = hashbin_new(HB_LOCK);
+
+	if (obj->attribs == NULL) {
+		IRDA_WARNING("%s(), Unable to allocate attribs!\n",
+			     __FUNCTION__);
+		kfree(obj);
+		return NULL;
+	}
+
+	return obj;
+}
+EXPORT_SYMBOL(irias_new_object);
+
+/*
+ * Function irias_delete_attrib (attrib)
+ *
+ *    Delete given attribute and deallocate all its memory
+ *
+ */
+static void __irias_delete_attrib(struct ias_attrib *attrib)
+{
+	IRDA_ASSERT(attrib != NULL, return;);
+	IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;);
+
+	if (attrib->name)
+		kfree(attrib->name);
+
+	irias_delete_value(attrib->value);
+	attrib->magic = ~IAS_ATTRIB_MAGIC;
+
+	kfree(attrib);
+}
+
+void __irias_delete_object(struct ias_object *obj)
+{
+	IRDA_ASSERT(obj != NULL, return;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+	if (obj->name)
+		kfree(obj->name);
+
+	hashbin_delete(obj->attribs, (FREE_FUNC) __irias_delete_attrib);
+
+	obj->magic = ~IAS_OBJECT_MAGIC;
+
+	kfree(obj);
+}
+
+/*
+ * Function irias_delete_object (obj)
+ *
+ *    Remove object from hashbin and deallocate all attributes associated with
+ *    with this object and the object itself
+ *
+ */
+int irias_delete_object(struct ias_object *obj)
+{
+	struct ias_object *node;
+
+	IRDA_ASSERT(obj != NULL, return -1;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;);
+
+	/* Remove from list */
+	node = hashbin_remove_this(irias_objects, (irda_queue_t *) obj);
+	if (!node)
+		IRDA_DEBUG( 0, "%s(), object already removed!\n",
+			    __FUNCTION__);
+
+	/* Destroy */
+	__irias_delete_object(obj);
+
+	return 0;
+}
+EXPORT_SYMBOL(irias_delete_object);
+
+/*
+ * Function irias_delete_attrib (obj)
+ *
+ *    Remove attribute from hashbin and, if it was the last attribute of
+ *    the object, remove the object as well.
+ *
+ */
+int irias_delete_attrib(struct ias_object *obj, struct ias_attrib *attrib,
+			int cleanobject)
+{
+	struct ias_attrib *node;
+
+	IRDA_ASSERT(obj != NULL, return -1;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;);
+	IRDA_ASSERT(attrib != NULL, return -1;);
+
+	/* Remove attribute from object */
+	node = hashbin_remove_this(obj->attribs, (irda_queue_t *) attrib);
+	if (!node)
+		return 0; /* Already removed or non-existent */
+
+	/* Deallocate attribute */
+	__irias_delete_attrib(node);
+
+	/* Check if object has still some attributes, destroy it if none.
+	 * At first glance, this look dangerous, as the kernel reference
+	 * various IAS objects. However, we only use this function on
+	 * user attributes, not kernel attributes, so there is no risk
+	 * of deleting a kernel object this way. Jean II */
+	node = (struct ias_attrib *) hashbin_get_first(obj->attribs);
+	if (cleanobject && !node)
+		irias_delete_object(obj);
+
+	return 0;
+}
+
+/*
+ * Function irias_insert_object (obj)
+ *
+ *    Insert an object into the LM-IAS database
+ *
+ */
+void irias_insert_object(struct ias_object *obj)
+{
+	IRDA_ASSERT(obj != NULL, return;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+	hashbin_insert(irias_objects, (irda_queue_t *) obj, 0, obj->name);
+}
+EXPORT_SYMBOL(irias_insert_object);
+
+/*
+ * Function irias_find_object (name)
+ *
+ *    Find object with given name
+ *
+ */
+struct ias_object *irias_find_object(char *name)
+{
+	IRDA_ASSERT(name != NULL, return NULL;);
+
+	/* Unsafe (locking), object might change */
+	return hashbin_lock_find(irias_objects, 0, name);
+}
+EXPORT_SYMBOL(irias_find_object);
+
+/*
+ * Function irias_find_attrib (obj, name)
+ *
+ *    Find named attribute in object
+ *
+ */
+struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name)
+{
+	struct ias_attrib *attrib;
+
+	IRDA_ASSERT(obj != NULL, return NULL;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return NULL;);
+	IRDA_ASSERT(name != NULL, return NULL;);
+
+	attrib = hashbin_lock_find(obj->attribs, 0, name);
+	if (attrib == NULL)
+		return NULL;
+
+	/* Unsafe (locking), attrib might change */
+	return attrib;
+}
+EXPORT_SYMBOL(irias_find_attrib);
+
+/*
+ * Function irias_add_attribute (obj, attrib)
+ *
+ *    Add attribute to object
+ *
+ */
+static void irias_add_attrib(struct ias_object *obj, struct ias_attrib *attrib,
+			     int owner)
+{
+	IRDA_ASSERT(obj != NULL, return;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+	IRDA_ASSERT(attrib != NULL, return;);
+	IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;);
+
+	/* Set if attrib is owned by kernel or user space */
+	attrib->value->owner = owner;
+
+	hashbin_insert(obj->attribs, (irda_queue_t *) attrib, 0, attrib->name);
+}
+
+/*
+ * Function irias_object_change_attribute (obj_name, attrib_name, new_value)
+ *
+ *    Change the value of an objects attribute.
+ *
+ */
+int irias_object_change_attribute(char *obj_name, char *attrib_name,
+				  struct ias_value *new_value)
+{
+	struct ias_object *obj;
+	struct ias_attrib *attrib;
+	unsigned long flags;
+
+	/* Find object */
+	obj = hashbin_lock_find(irias_objects, 0, obj_name);
+	if (obj == NULL) {
+		IRDA_WARNING("%s: Unable to find object: %s\n", __FUNCTION__,
+			     obj_name);
+		return -1;
+	}
+
+	/* Slightly unsafe (obj might get removed under us) */
+	spin_lock_irqsave(&obj->attribs->hb_spinlock, flags);
+
+	/* Find attribute */
+	attrib = hashbin_find(obj->attribs, 0, attrib_name);
+	if (attrib == NULL) {
+		IRDA_WARNING("%s: Unable to find attribute: %s\n",
+			     __FUNCTION__, attrib_name);
+		spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags);
+		return -1;
+	}
+
+	if ( attrib->value->type != new_value->type) {
+		IRDA_DEBUG( 0, "%s(), changing value type not allowed!\n",
+			    __FUNCTION__);
+		spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags);
+		return -1;
+	}
+
+	/* Delete old value */
+	irias_delete_value(attrib->value);
+
+	/* Insert new value */
+	attrib->value = new_value;
+
+	/* Success */
+	spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(irias_object_change_attribute);
+
+/*
+ * Function irias_object_add_integer_attrib (obj, name, value)
+ *
+ *    Add an integer attribute to an LM-IAS object
+ *
+ */
+void irias_add_integer_attrib(struct ias_object *obj, char *name, int value,
+			      int owner)
+{
+	struct ias_attrib *attrib;
+
+	IRDA_ASSERT(obj != NULL, return;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+	IRDA_ASSERT(name != NULL, return;);
+
+	attrib = (struct ias_attrib *) kmalloc(sizeof(struct ias_attrib),
+					       GFP_ATOMIC);
+	if (attrib == NULL) {
+		IRDA_WARNING("%s: Unable to allocate attribute!\n",
+			     __FUNCTION__);
+		return;
+	}
+	memset(attrib, 0, sizeof( struct ias_attrib));
+
+	attrib->magic = IAS_ATTRIB_MAGIC;
+	attrib->name = strndup(name, IAS_MAX_ATTRIBNAME);
+
+	/* Insert value */
+	attrib->value = irias_new_integer_value(value);
+
+	irias_add_attrib(obj, attrib, owner);
+}
+EXPORT_SYMBOL(irias_add_integer_attrib);
+
+ /*
+ * Function irias_add_octseq_attrib (obj, name, octet_seq, len)
+ *
+ *    Add a octet sequence attribute to an LM-IAS object
+ *
+ */
+
+void irias_add_octseq_attrib(struct ias_object *obj, char *name, __u8 *octets,
+			     int len, int owner)
+{
+	struct ias_attrib *attrib;
+
+	IRDA_ASSERT(obj != NULL, return;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+	IRDA_ASSERT(name != NULL, return;);
+	IRDA_ASSERT(octets != NULL, return;);
+
+	attrib = (struct ias_attrib *) kmalloc(sizeof(struct ias_attrib),
+					       GFP_ATOMIC);
+	if (attrib == NULL) {
+		IRDA_WARNING("%s: Unable to allocate attribute!\n",
+			     __FUNCTION__);
+		return;
+	}
+	memset(attrib, 0, sizeof( struct ias_attrib));
+
+	attrib->magic = IAS_ATTRIB_MAGIC;
+	attrib->name = strndup(name, IAS_MAX_ATTRIBNAME);
+
+	attrib->value = irias_new_octseq_value( octets, len);
+
+	irias_add_attrib(obj, attrib, owner);
+}
+EXPORT_SYMBOL(irias_add_octseq_attrib);
+
+/*
+ * Function irias_object_add_string_attrib (obj, string)
+ *
+ *    Add a string attribute to an LM-IAS object
+ *
+ */
+void irias_add_string_attrib(struct ias_object *obj, char *name, char *value,
+			     int owner)
+{
+	struct ias_attrib *attrib;
+
+	IRDA_ASSERT(obj != NULL, return;);
+	IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;);
+
+	IRDA_ASSERT(name != NULL, return;);
+	IRDA_ASSERT(value != NULL, return;);
+
+	attrib = (struct ias_attrib *) kmalloc(sizeof( struct ias_attrib),
+					       GFP_ATOMIC);
+	if (attrib == NULL) {
+		IRDA_WARNING("%s: Unable to allocate attribute!\n",
+			     __FUNCTION__);
+		return;
+	}
+	memset(attrib, 0, sizeof( struct ias_attrib));
+
+	attrib->magic = IAS_ATTRIB_MAGIC;
+	attrib->name = strndup(name, IAS_MAX_ATTRIBNAME);
+
+	attrib->value = irias_new_string_value(value);
+
+	irias_add_attrib(obj, attrib, owner);
+}
+EXPORT_SYMBOL(irias_add_string_attrib);
+
+/*
+ * Function irias_new_integer_value (integer)
+ *
+ *    Create new IAS integer value
+ *
+ */
+struct ias_value *irias_new_integer_value(int integer)
+{
+	struct ias_value *value;
+
+	value = kmalloc(sizeof(struct ias_value), GFP_ATOMIC);
+	if (value == NULL) {
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+	memset(value, 0, sizeof(struct ias_value));
+
+	value->type = IAS_INTEGER;
+	value->len = 4;
+	value->t.integer = integer;
+
+	return value;
+}
+EXPORT_SYMBOL(irias_new_integer_value);
+
+/*
+ * Function irias_new_string_value (string)
+ *
+ *    Create new IAS string value
+ *
+ * Per IrLMP 1.1, 4.3.3.2, strings are up to 256 chars - Jean II
+ */
+struct ias_value *irias_new_string_value(char *string)
+{
+	struct ias_value *value;
+
+	value = kmalloc(sizeof(struct ias_value), GFP_ATOMIC);
+	if (value == NULL) {
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+	memset( value, 0, sizeof( struct ias_value));
+
+	value->type = IAS_STRING;
+	value->charset = CS_ASCII;
+	value->t.string = strndup(string, IAS_MAX_STRING);
+	value->len = strlen(value->t.string);
+
+	return value;
+}
+EXPORT_SYMBOL(irias_new_string_value);
+
+/*
+ * Function irias_new_octseq_value (octets, len)
+ *
+ *    Create new IAS octet-sequence value
+ *
+ * Per IrLMP 1.1, 4.3.3.2, octet-sequence are up to 1024 bytes - Jean II
+ */
+struct ias_value *irias_new_octseq_value(__u8 *octseq , int len)
+{
+	struct ias_value *value;
+
+	value = kmalloc(sizeof(struct ias_value), GFP_ATOMIC);
+	if (value == NULL) {
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+	memset(value, 0, sizeof(struct ias_value));
+
+	value->type = IAS_OCT_SEQ;
+	/* Check length */
+	if(len > IAS_MAX_OCTET_STRING)
+		len = IAS_MAX_OCTET_STRING;
+	value->len = len;
+
+	value->t.oct_seq = kmalloc(len, GFP_ATOMIC);
+	if (value->t.oct_seq == NULL){
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		kfree(value);
+		return NULL;
+	}
+	memcpy(value->t.oct_seq, octseq , len);
+	return value;
+}
+EXPORT_SYMBOL(irias_new_octseq_value);
+
+struct ias_value *irias_new_missing_value(void)
+{
+	struct ias_value *value;
+
+	value = kmalloc(sizeof(struct ias_value), GFP_ATOMIC);
+	if (value == NULL) {
+		IRDA_WARNING("%s: Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+	memset(value, 0, sizeof(struct ias_value));
+
+	value->type = IAS_MISSING;
+	value->len = 0;
+
+	return value;
+}
+
+/*
+ * Function irias_delete_value (value)
+ *
+ *    Delete IAS value
+ *
+ */
+void irias_delete_value(struct ias_value *value)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(value != NULL, return;);
+
+	switch (value->type) {
+	case IAS_INTEGER: /* Fallthrough */
+	case IAS_MISSING:
+		/* No need to deallocate */
+		break;
+	case IAS_STRING:
+		/* If string, deallocate string */
+		if (value->t.string != NULL)
+			kfree(value->t.string);
+		break;
+	case IAS_OCT_SEQ:
+		/* If byte stream, deallocate byte stream */
+		 if (value->t.oct_seq != NULL)
+			 kfree(value->t.oct_seq);
+		 break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown value type!\n", __FUNCTION__);
+		break;
+	}
+	kfree(value);
+}
+EXPORT_SYMBOL(irias_delete_value);
diff --git a/net/irda/irlan/Kconfig b/net/irda/irlan/Kconfig
new file mode 100644
index 00000000000..951abc2e3a7
--- /dev/null
+++ b/net/irda/irlan/Kconfig
@@ -0,0 +1,14 @@
+config IRLAN
+	tristate "IrLAN protocol"
+	depends on IRDA
+	help
+	  Say Y here if you want to build support for the IrLAN protocol.
+	  To compile it as a module, choose M here: the module will be called
+	  irlan.  IrLAN emulates an Ethernet and makes it possible to put up
+	  a wireless LAN using infrared beams.
+
+	  The IrLAN protocol can be used to talk with infrared access points
+	  like the HP NetbeamIR, or the ESI JetEye NET.  You can also connect
+	  to another Linux machine running the IrLAN protocol for ad-hoc
+	  networking!
+
diff --git a/net/irda/irlan/Makefile b/net/irda/irlan/Makefile
new file mode 100644
index 00000000000..77549bc8641
--- /dev/null
+++ b/net/irda/irlan/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux IrDA IrLAN protocol layer.
+#
+
+obj-$(CONFIG_IRLAN) += irlan.o
+
+irlan-objs := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o
diff --git a/net/irda/irlan/irlan_client.c b/net/irda/irlan/irlan_client.c
new file mode 100644
index 00000000000..f8e6cb0db04
--- /dev/null
+++ b/net/irda/irlan/irlan_client.c
@@ -0,0 +1,576 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_client.c
+ * Version:       0.9
+ * Description:   IrDA LAN Access Protocol (IrLAN) Client
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Tue Dec 14 15:47:02 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Sources:       skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
+ *                slip.c by Laurence Culhane, <loz@holmes.demon.co.uk>
+ *                          Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <linux/bitops.h>
+#include <net/arp.h>
+
+#include <asm/system.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/iriap.h>
+#include <net/irda/timer.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_event.h>
+#include <net/irda/irlan_eth.h>
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_client.h>
+
+#undef CONFIG_IRLAN_GRATUITOUS_ARP
+
+static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap, 
+						    LM_REASON reason, 
+						    struct sk_buff *);
+static int irlan_client_ctrl_data_indication(void *instance, void *sap, 
+					     struct sk_buff *skb);
+static void irlan_client_ctrl_connect_confirm(void *instance, void *sap, 
+					      struct qos_info *qos, 
+					      __u32 max_sdu_size,
+					      __u8 max_header_size,
+					      struct sk_buff *);
+static void irlan_check_response_param(struct irlan_cb *self, char *param, 
+				       char *value, int val_len);
+static void irlan_client_open_ctrl_tsap(struct irlan_cb *self);
+
+static void irlan_client_kick_timer_expired(void *data)
+{
+	struct irlan_cb *self = (struct irlan_cb *) data;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	/*  
+	 * If we are in peer mode, the client may not have got the discovery
+	 * indication it needs to make progress. If the client is still in 
+	 * IDLE state, we must kick it to, but only if the provider is not IDLE
+ 	 */
+	if ((self->provider.access_type == ACCESS_PEER) && 
+	    (self->client.state == IRLAN_IDLE) &&
+	    (self->provider.state != IRLAN_IDLE)) {
+		irlan_client_wakeup(self, self->saddr, self->daddr);
+	}
+}
+
+static void irlan_client_start_kick_timer(struct irlan_cb *self, int timeout)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	irda_start_timer(&self->client.kick_timer, timeout, (void *) self, 
+			 irlan_client_kick_timer_expired);
+}
+
+/*
+ * Function irlan_client_wakeup (self, saddr, daddr)
+ *
+ *    Wake up client
+ *
+ */
+void irlan_client_wakeup(struct irlan_cb *self, __u32 saddr, __u32 daddr)
+{
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* 
+	 * Check if we are already awake, or if we are a provider in direct
+	 * mode (in that case we must leave the client idle
+	 */
+	if ((self->client.state != IRLAN_IDLE) || 
+	    (self->provider.access_type == ACCESS_DIRECT))
+	{
+			IRDA_DEBUG(0, "%s(), already awake!\n", __FUNCTION__ );
+			return;
+	}
+
+	/* Addresses may have changed! */
+	self->saddr = saddr;
+	self->daddr = daddr;
+
+	if (self->disconnect_reason == LM_USER_REQUEST) {
+			IRDA_DEBUG(0, "%s(), still stopped by user\n", __FUNCTION__ );
+			return;
+	}
+
+	/* Open TSAPs */
+	irlan_client_open_ctrl_tsap(self);
+	irlan_open_data_tsap(self);
+
+	irlan_do_client_event(self, IRLAN_DISCOVERY_INDICATION, NULL);
+	
+	/* Start kick timer */
+	irlan_client_start_kick_timer(self, 2*HZ);
+}
+
+/*
+ * Function irlan_discovery_indication (daddr)
+ *
+ *    Remote device with IrLAN server support discovered
+ *
+ */
+void irlan_client_discovery_indication(discinfo_t *discovery,
+				       DISCOVERY_MODE mode,
+				       void *priv) 
+{
+	struct irlan_cb *self;
+	__u32 saddr, daddr;
+	
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(discovery != NULL, return;);
+
+	/*
+	 * I didn't check it, but I bet that IrLAN suffer from the same
+	 * deficiency as IrComm and doesn't handle two instances
+	 * simultaneously connecting to each other.
+	 * Same workaround, drop passive discoveries.
+	 * Jean II */
+	if(mode == DISCOVERY_PASSIVE)
+		return;
+
+	saddr = discovery->saddr;
+	daddr = discovery->daddr;
+
+	/* Find instance */
+	rcu_read_lock();
+	self = irlan_get_any();
+	if (self) {
+		IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+		IRDA_DEBUG(1, "%s(), Found instance (%08x)!\n", __FUNCTION__ ,
+		      daddr);
+		
+		irlan_client_wakeup(self, saddr, daddr);
+	}
+	rcu_read_unlock();
+}
+	
+/*
+ * Function irlan_client_data_indication (handle, skb)
+ *
+ *    This function gets the data that is received on the control channel
+ *
+ */
+static int irlan_client_ctrl_data_indication(void *instance, void *sap, 
+					     struct sk_buff *skb)
+{
+	struct irlan_cb *self;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	
+	self = (struct irlan_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+	
+	irlan_do_client_event(self, IRLAN_DATA_INDICATION, skb); 
+
+	/* Ready for a new command */	
+	IRDA_DEBUG(2, "%s(), clearing tx_busy\n", __FUNCTION__ );
+	self->client.tx_busy = FALSE;
+
+	/* Check if we have some queued commands waiting to be sent */
+	irlan_run_ctrl_tx_queue(self);
+
+	return 0;
+}
+
+static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap, 
+						    LM_REASON reason, 
+						    struct sk_buff *userdata) 
+{
+	struct irlan_cb *self;
+	struct tsap_cb *tsap;
+	struct sk_buff *skb;
+
+	IRDA_DEBUG(4, "%s(), reason=%d\n", __FUNCTION__ , reason);
+	
+	self = (struct irlan_cb *) instance;
+	tsap = (struct tsap_cb *) sap;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);	
+	IRDA_ASSERT(tsap != NULL, return;);
+	IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;);
+	
+	IRDA_ASSERT(tsap == self->client.tsap_ctrl, return;);
+
+       	/* Remove frames queued on the control channel */
+	while ((skb = skb_dequeue(&self->client.txq)) != NULL) {
+		dev_kfree_skb(skb);
+	}
+	self->client.tx_busy = FALSE;
+
+	irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
+}
+
+/*
+ * Function irlan_client_open_tsaps (self)
+ *
+ *    Initialize callbacks and open IrTTP TSAPs
+ *
+ */
+static void irlan_client_open_ctrl_tsap(struct irlan_cb *self)
+{
+	struct tsap_cb *tsap;
+	notify_t notify;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* Check if already open */
+	if (self->client.tsap_ctrl)
+		return;
+
+	irda_notify_init(&notify);
+
+	/* Set up callbacks */
+	notify.data_indication       = irlan_client_ctrl_data_indication;
+	notify.connect_confirm       = irlan_client_ctrl_connect_confirm;
+	notify.disconnect_indication = irlan_client_ctrl_disconnect_indication;
+	notify.instance = self;
+	strlcpy(notify.name, "IrLAN ctrl (c)", sizeof(notify.name));
+	
+	tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, &notify);
+	if (!tsap) {
+		IRDA_DEBUG(2, "%s(), Got no tsap!\n", __FUNCTION__ );
+		return;
+	}
+	self->client.tsap_ctrl = tsap;
+}
+
+/*
+ * Function irlan_client_connect_confirm (handle, skb)
+ *
+ *    Connection to peer IrLAN laye confirmed
+ *
+ */
+static void irlan_client_ctrl_connect_confirm(void *instance, void *sap, 
+					      struct qos_info *qos, 
+					      __u32 max_sdu_size,
+					      __u8 max_header_size,
+					      struct sk_buff *skb) 
+{
+	struct irlan_cb *self;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	self = (struct irlan_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	self->client.max_sdu_size = max_sdu_size;
+	self->client.max_header_size = max_header_size;
+
+	/* TODO: we could set the MTU depending on the max_sdu_size */
+
+	irlan_do_client_event(self, IRLAN_CONNECT_COMPLETE, NULL);
+}
+
+/*
+ * Function print_ret_code (code)
+ *
+ *    Print return code of request to peer IrLAN layer.
+ *
+ */
+static void print_ret_code(__u8 code) 
+{
+	switch(code) {
+	case 0:
+		printk(KERN_INFO "Success\n");
+		break;
+	case 1:
+		IRDA_WARNING("IrLAN: Insufficient resources\n");
+		break;
+	case 2:
+		IRDA_WARNING("IrLAN: Invalid command format\n");
+		break;
+	case 3:
+		IRDA_WARNING("IrLAN: Command not supported\n");
+		break;
+	case 4:
+		IRDA_WARNING("IrLAN: Parameter not supported\n");
+		break;
+	case 5:
+		IRDA_WARNING("IrLAN: Value not supported\n");
+		break;
+	case 6:
+		IRDA_WARNING("IrLAN: Not open\n");
+		break;
+	case 7:
+		IRDA_WARNING("IrLAN: Authentication required\n");
+		break;
+	case 8:
+		IRDA_WARNING("IrLAN: Invalid password\n");
+		break;
+	case 9:
+		IRDA_WARNING("IrLAN: Protocol error\n");
+		break;
+	case 255:
+		IRDA_WARNING("IrLAN: Asynchronous status\n");
+		break;
+	}
+}
+
+/*
+ * Function irlan_client_parse_response (self, skb)
+ *
+ *    Extract all parameters from received buffer, then feed them to 
+ *    check_params for parsing
+ */
+void irlan_client_parse_response(struct irlan_cb *self, struct sk_buff *skb)
+{
+	__u8 *frame;
+	__u8 *ptr;
+	int count;
+	int ret;
+	__u16 val_len;
+	int i;
+        char *name;
+        char *value;
+
+	IRDA_ASSERT(skb != NULL, return;);	
+	
+	IRDA_DEBUG(4, "%s() skb->len=%d\n", __FUNCTION__ , (int) skb->len);
+	
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	if (!skb) {
+		IRDA_ERROR("%s(), Got NULL skb!\n", __FUNCTION__);
+		return;
+	}
+	frame = skb->data;
+	
+	/* 
+	 *  Check return code and print it if not success 
+	 */
+	if (frame[0]) {
+		print_ret_code(frame[0]);
+		return;
+	}
+	
+	name = kmalloc(255, GFP_ATOMIC);
+	if (!name)
+		return;
+	value = kmalloc(1016, GFP_ATOMIC);
+	if (!value) {
+		kfree(name);
+		return;
+	}
+
+	/* How many parameters? */
+	count = frame[1];
+
+	IRDA_DEBUG(4, "%s(), got %d parameters\n", __FUNCTION__ , count);
+	
+	ptr = frame+2;
+
+	/* For all parameters */
+ 	for (i=0; i<count;i++) {
+		ret = irlan_extract_param(ptr, name, value, &val_len);
+		if (ret < 0) {
+			IRDA_DEBUG(2, "%s(), IrLAN, Error!\n", __FUNCTION__ );
+			break;
+		}
+		ptr += ret;
+		irlan_check_response_param(self, name, value, val_len);
+ 	}
+	/* Cleanup */
+	kfree(name);
+	kfree(value);
+}
+
+/*
+ * Function irlan_check_response_param (self, param, value, val_len)
+ *
+ *     Check which parameter is received and update local variables
+ *
+ */
+static void irlan_check_response_param(struct irlan_cb *self, char *param, 
+				       char *value, int val_len) 
+{
+	__u16 tmp_cpu; /* Temporary value in host order */
+	__u8 *bytes;
+	int i;
+
+	IRDA_DEBUG(4, "%s(), parm=%s\n", __FUNCTION__ , param);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* Media type */
+	if (strcmp(param, "MEDIA") == 0) {
+		if (strcmp(value, "802.3") == 0)
+			self->media = MEDIA_802_3;
+		else
+			self->media = MEDIA_802_5;
+		return;
+	}
+	if (strcmp(param, "FILTER_TYPE") == 0) {
+		if (strcmp(value, "DIRECTED") == 0)
+			self->client.filter_type |= IRLAN_DIRECTED;
+		else if (strcmp(value, "FUNCTIONAL") == 0)
+			self->client.filter_type |= IRLAN_FUNCTIONAL;
+		else if (strcmp(value, "GROUP") == 0)
+			self->client.filter_type |= IRLAN_GROUP;
+		else if (strcmp(value, "MAC_FRAME") == 0)
+			self->client.filter_type |= IRLAN_MAC_FRAME;
+		else if (strcmp(value, "MULTICAST") == 0)
+			self->client.filter_type |= IRLAN_MULTICAST;
+		else if (strcmp(value, "BROADCAST") == 0)
+			self->client.filter_type |= IRLAN_BROADCAST;
+		else if (strcmp(value, "IPX_SOCKET") == 0)
+			self->client.filter_type |= IRLAN_IPX_SOCKET;
+		
+	}
+	if (strcmp(param, "ACCESS_TYPE") == 0) {
+		if (strcmp(value, "DIRECT") == 0)
+			self->client.access_type = ACCESS_DIRECT;
+		else if (strcmp(value, "PEER") == 0)
+			self->client.access_type = ACCESS_PEER;
+		else if (strcmp(value, "HOSTED") == 0)
+			self->client.access_type = ACCESS_HOSTED;
+		else {
+			IRDA_DEBUG(2, "%s(), unknown access type!\n", __FUNCTION__ );
+		}
+	}
+	/* IRLAN version */
+	if (strcmp(param, "IRLAN_VER") == 0) {
+		IRDA_DEBUG(4, "IrLAN version %d.%d\n", (__u8) value[0], 
+		      (__u8) value[1]);
+
+		self->version[0] = value[0];
+		self->version[1] = value[1];
+		return;
+	}
+	/* Which remote TSAP to use for data channel */
+	if (strcmp(param, "DATA_CHAN") == 0) {
+		self->dtsap_sel_data = value[0];
+		IRDA_DEBUG(4, "Data TSAP = %02x\n", self->dtsap_sel_data);
+		return;
+	}
+	if (strcmp(param, "CON_ARB") == 0) {
+		memcpy(&tmp_cpu, value, 2); /* Align value */
+		le16_to_cpus(&tmp_cpu);     /* Convert to host order */
+		self->client.recv_arb_val = tmp_cpu;
+		IRDA_DEBUG(2, "%s(), receive arb val=%d\n", __FUNCTION__ , 
+			   self->client.recv_arb_val);
+	}
+	if (strcmp(param, "MAX_FRAME") == 0) {
+		memcpy(&tmp_cpu, value, 2); /* Align value */
+		le16_to_cpus(&tmp_cpu);     /* Convert to host order */
+		self->client.max_frame = tmp_cpu;
+		IRDA_DEBUG(4, "%s(), max frame=%d\n", __FUNCTION__ , 
+			   self->client.max_frame);
+	}
+	 
+	/* RECONNECT_KEY, in case the link goes down! */
+	if (strcmp(param, "RECONNECT_KEY") == 0) {
+		IRDA_DEBUG(4, "Got reconnect key: ");
+		/* for (i = 0; i < val_len; i++) */
+/* 			printk("%02x", value[i]); */
+		memcpy(self->client.reconnect_key, value, val_len);
+		self->client.key_len = val_len;
+		IRDA_DEBUG(4, "\n");
+	}
+	/* FILTER_ENTRY, have we got an ethernet address? */
+	if (strcmp(param, "FILTER_ENTRY") == 0) {
+		bytes = value;
+		IRDA_DEBUG(4, "Ethernet address = %02x:%02x:%02x:%02x:%02x:%02x\n",
+		      bytes[0], bytes[1], bytes[2], bytes[3], bytes[4], 
+		      bytes[5]);
+		for (i = 0; i < 6; i++) 
+			self->dev->dev_addr[i] = bytes[i];
+	}
+}
+
+/*
+ * Function irlan_client_get_value_confirm (obj_id, value)
+ *
+ *    Got results from remote LM-IAS
+ *
+ */
+void irlan_client_get_value_confirm(int result, __u16 obj_id, 
+				    struct ias_value *value, void *priv) 
+{
+	struct irlan_cb *self;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(priv != NULL, return;);
+
+	self = (struct irlan_cb *) priv;
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* We probably don't need to make any more queries */
+	iriap_close(self->client.iriap);
+	self->client.iriap = NULL;
+
+	/* Check if request succeeded */
+	if (result != IAS_SUCCESS) {
+		IRDA_DEBUG(2, "%s(), got NULL value!\n", __FUNCTION__ );
+		irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, 
+				      NULL);
+		return;
+	}
+
+	switch (value->type) {
+	case IAS_INTEGER:
+		self->dtsap_sel_ctrl = value->t.integer;
+
+		if (value->t.integer != -1) {
+			irlan_do_client_event(self, IRLAN_IAS_PROVIDER_AVAIL,
+					      NULL);
+			return;
+		}
+		irias_delete_value(value);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), unknown type!\n", __FUNCTION__ );
+		break;
+	}
+	irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, NULL);
+}
diff --git a/net/irda/irlan/irlan_client_event.c b/net/irda/irlan/irlan_client_event.c
new file mode 100644
index 00000000000..ce943b69e99
--- /dev/null
+++ b/net/irda/irlan/irlan_client_event.c
@@ -0,0 +1,533 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_client_event.c
+ * Version:       0.9
+ * Description:   IrLAN client state machine
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sun Dec 26 21:52:24 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/timer.h>
+#include <net/irda/irmod.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_client.h>
+#include <net/irda/irlan_event.h>
+
+static int irlan_client_state_idle (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_conn (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_info (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_open (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_wait (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_arb  (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_data (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+static int irlan_client_state_sync (struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb);
+
+static int (*state[])(struct irlan_cb *, IRLAN_EVENT event, struct sk_buff *) =
+{ 
+	irlan_client_state_idle,
+	irlan_client_state_query,
+	irlan_client_state_conn,
+	irlan_client_state_info,
+	irlan_client_state_media,
+	irlan_client_state_open,
+	irlan_client_state_wait,
+	irlan_client_state_arb,
+	irlan_client_state_data,
+	irlan_client_state_close,
+	irlan_client_state_sync
+};
+
+void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event, 
+			   struct sk_buff *skb) 
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	(*state[ self->client.state]) (self, event, skb);
+}
+
+/*
+ * Function irlan_client_state_idle (event, skb, info)
+ *
+ *    IDLE, We are waiting for an indication that there is a provider
+ *    available.
+ */
+static int irlan_client_state_idle(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+	
+	switch (event) {
+	case IRLAN_DISCOVERY_INDICATION:
+		if (self->client.iriap) {
+			IRDA_WARNING("%s(), busy with a previous query\n",
+				     __FUNCTION__);
+			return -EBUSY;
+		}
+		
+		self->client.iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+						irlan_client_get_value_confirm);
+		/* Get some values from peer IAS */
+		irlan_next_client_state(self, IRLAN_QUERY);
+		iriap_getvaluebyclass_request(self->client.iriap,
+					      self->saddr, self->daddr,
+					      "IrLAN", "IrDA:TinyTP:LsapSel");
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(4, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb) 
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_query (event, skb, info)
+ *
+ *    QUERY, We have queryed the remote IAS and is ready to connect
+ *    to provider, just waiting for the confirm.
+ *
+ */
+static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+	
+	switch(event) {
+	case IRLAN_IAS_PROVIDER_AVAIL:
+		IRDA_ASSERT(self->dtsap_sel_ctrl != 0, return -1;);
+
+		self->client.open_retries = 0;
+		
+		irttp_connect_request(self->client.tsap_ctrl, 
+				      self->dtsap_sel_ctrl, 
+				      self->saddr, self->daddr, NULL, 
+				      IRLAN_MTU, NULL);
+		irlan_next_client_state(self, IRLAN_CONN);
+		break;
+	case IRLAN_IAS_PROVIDER_NOT_AVAIL:
+		IRDA_DEBUG(2, "%s(), IAS_PROVIDER_NOT_AVAIL\n", __FUNCTION__ );
+		irlan_next_client_state(self, IRLAN_IDLE);
+
+		/* Give the client a kick! */
+		if ((self->provider.access_type == ACCESS_PEER) && 
+		    (self->provider.state != IRLAN_IDLE))
+			irlan_client_wakeup(self, self->saddr, self->daddr);
+		break;
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_conn (event, skb, info)
+ *
+ *    CONN, We have connected to a provider but has not issued any
+ *    commands yet.
+ *
+ */
+static int irlan_client_state_conn(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	
+	switch (event) {
+	case IRLAN_CONNECT_COMPLETE:
+		/* Send getinfo cmd */
+		irlan_get_provider_info(self);
+		irlan_next_client_state(self, IRLAN_INFO);
+		break;
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_info (self, event, skb, info)
+ *
+ *    INFO, We have issued a GetInfo command and is awaiting a reply.
+ */
+static int irlan_client_state_info(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	
+	switch (event) {
+	case IRLAN_DATA_INDICATION:
+		IRDA_ASSERT(skb != NULL, return -1;);
+	
+		irlan_client_parse_response(self, skb);
+		
+		irlan_next_client_state(self, IRLAN_MEDIA);
+		
+		irlan_get_media_char(self);
+		break;
+		
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_media (self, event, skb, info)
+ *
+ *    MEDIA, The irlan_client has issued a GetMedia command and is awaiting a
+ *    reply.
+ *
+ */
+static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	switch(event) {
+	case IRLAN_DATA_INDICATION:
+		irlan_client_parse_response(self, skb);
+		irlan_open_data_channel(self);
+		irlan_next_client_state(self, IRLAN_OPEN);
+		break;
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_open (self, event, skb, info)
+ *
+ *    OPEN, The irlan_client has issued a OpenData command and is awaiting a
+ *    reply
+ *
+ */
+static int irlan_client_state_open(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	struct qos_info qos;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	switch(event) {
+	case IRLAN_DATA_INDICATION:
+		irlan_client_parse_response(self, skb);
+		
+		/*
+		 *  Check if we have got the remote TSAP for data 
+		 *  communications
+		 */
+	  	IRDA_ASSERT(self->dtsap_sel_data != 0, return -1;);
+
+		/* Check which access type we are dealing with */
+		switch (self->client.access_type) {
+		case ACCESS_PEER:
+		    if (self->provider.state == IRLAN_OPEN) {
+			    
+			    irlan_next_client_state(self, IRLAN_ARB);
+			    irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, 
+						  NULL);
+		    } else {
+			
+			    irlan_next_client_state(self, IRLAN_WAIT);
+		    }
+		    break;
+		case ACCESS_DIRECT:
+		case ACCESS_HOSTED:
+			qos.link_disc_time.bits = 0x01; /* 3 secs */
+			
+			irttp_connect_request(self->tsap_data, 
+					      self->dtsap_sel_data, 
+					      self->saddr, self->daddr, &qos, 
+					      IRLAN_MTU, NULL);
+			
+			irlan_next_client_state(self, IRLAN_DATA);
+			break;
+		default:
+			IRDA_DEBUG(2, "%s(), unknown access type!\n", __FUNCTION__ );
+			break;
+		}
+		break;
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	
+	if (skb)
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_wait (self, event, skb, info)
+ *
+ *    WAIT, The irlan_client is waiting for the local provider to enter the
+ *    provider OPEN state.
+ *
+ */
+static int irlan_client_state_wait(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	
+	switch(event) {
+	case IRLAN_PROVIDER_SIGNAL:
+		irlan_next_client_state(self, IRLAN_ARB);
+		irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, NULL);
+		break;
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+static int irlan_client_state_arb(struct irlan_cb *self, IRLAN_EVENT event, 
+				  struct sk_buff *skb) 
+{
+	struct qos_info qos;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	
+	switch(event) {
+	case IRLAN_CHECK_CON_ARB:
+		if (self->client.recv_arb_val == self->provider.send_arb_val) {
+			irlan_next_client_state(self, IRLAN_CLOSE);
+			irlan_close_data_channel(self);
+		} else if (self->client.recv_arb_val < 
+			   self->provider.send_arb_val) 
+		{
+			qos.link_disc_time.bits = 0x01; /* 3 secs */
+
+			irlan_next_client_state(self, IRLAN_DATA);
+			irttp_connect_request(self->tsap_data, 
+					      self->dtsap_sel_data, 
+					      self->saddr, self->daddr, &qos, 
+					      IRLAN_MTU, NULL);
+		} else if (self->client.recv_arb_val >
+			   self->provider.send_arb_val) 
+		{
+			IRDA_DEBUG(2, "%s(), lost the battle :-(\n", __FUNCTION__ );
+		}
+		break;
+	case IRLAN_DATA_CONNECT_INDICATION:
+		irlan_next_client_state(self, IRLAN_DATA);
+		break;
+	case IRLAN_LMP_DISCONNECT:
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	case IRLAN_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(2, "%s(), IRLAN_WATCHDOG_TIMEOUT\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_data (self, event, skb, info)
+ *
+ *    DATA, The data channel is connected, allowing data transfers between
+ *    the local and remote machines.
+ *
+ */
+static int irlan_client_state_data(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+	switch(event) {
+	case IRLAN_DATA_INDICATION:
+		irlan_client_parse_response(self, skb);
+		break;		
+	case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_client_state(self, IRLAN_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_close (self, event, skb, info)
+ *
+ *    
+ *
+ */
+static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event, 
+				    struct sk_buff *skb) 
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if (skb)
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function irlan_client_state_sync (self, event, skb, info)
+ *
+ *    
+ *
+ */
+static int irlan_client_state_sync(struct irlan_cb *self, IRLAN_EVENT event, 
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/net/irda/irlan/irlan_common.c b/net/irda/irlan/irlan_common.c
new file mode 100644
index 00000000000..657d1221057
--- /dev/null
+++ b/net/irda/irlan/irlan_common.c
@@ -0,0 +1,1200 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_common.c
+ * Version:       0.9
+ * Description:   IrDA LAN Access Protocol Implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sun Dec 26 21:53:10 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/random.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/moduleparam.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/iriap.h>
+#include <net/irda/timer.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_client.h>
+#include <net/irda/irlan_provider.h> 
+#include <net/irda/irlan_eth.h>
+#include <net/irda/irlan_filter.h>
+
+
+/* 
+ * Send gratuitous ARP when connected to a new AP or not. May be a clever
+ * thing to do, but for some reason the machine crashes if you use DHCP. So
+ * lets not use it by default.
+ */
+#undef CONFIG_IRLAN_SEND_GRATUITOUS_ARP
+
+/* extern char sysctl_devname[]; */
+
+/*
+ *  Master structure
+ */
+static LIST_HEAD(irlans);
+
+static void *ckey;
+static void *skey;
+
+/* Module parameters */
+static int eth;   /* Use "eth" or "irlan" name for devices */
+static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */
+
+#ifdef CONFIG_PROC_FS
+static const char *irlan_access[] = {
+	"UNKNOWN",
+	"DIRECT",
+	"PEER",
+	"HOSTED"
+};
+
+static const char *irlan_media[] = {
+	"UNKNOWN",
+	"802.3",
+	"802.5"
+};
+
+extern struct proc_dir_entry *proc_irda;
+
+static int irlan_seq_open(struct inode *inode, struct file *file);
+
+static struct file_operations irlan_fops = {
+	.owner	 = THIS_MODULE,
+	.open    = irlan_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release,
+};
+
+extern struct proc_dir_entry *proc_irda;
+#endif /* CONFIG_PROC_FS */
+
+static struct irlan_cb *irlan_open(__u32 saddr, __u32 daddr);
+static void __irlan_close(struct irlan_cb *self);
+static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, 
+				__u8 value_byte, __u16 value_short, 
+				__u8 *value_array, __u16 value_len);
+static void irlan_open_unicast_addr(struct irlan_cb *self);
+static void irlan_get_unicast_addr(struct irlan_cb *self);
+void irlan_close_tsaps(struct irlan_cb *self);
+
+/*
+ * Function irlan_init (void)
+ *
+ *    Initialize IrLAN layer
+ *
+ */
+static int __init irlan_init(void)
+{
+	struct irlan_cb *new;
+	__u16 hints;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+#ifdef CONFIG_PROC_FS
+	{ struct proc_dir_entry *proc;
+	proc = create_proc_entry("irlan", 0, proc_irda);
+	if (!proc) {
+		printk(KERN_ERR "irlan_init: can't create /proc entry!\n");
+		return -ENODEV;
+	}
+
+	proc->proc_fops = &irlan_fops;
+	}
+#endif /* CONFIG_PROC_FS */
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	hints = irlmp_service_to_hint(S_LAN);
+
+	/* Register with IrLMP as a client */
+	ckey = irlmp_register_client(hints, &irlan_client_discovery_indication,
+				     NULL, NULL);
+	
+	/* Register with IrLMP as a service */
+ 	skey = irlmp_register_service(hints);
+
+	/* Start the master IrLAN instance (the only one for now) */
+ 	new = irlan_open(DEV_ADDR_ANY, DEV_ADDR_ANY);
+
+	/* The master will only open its (listen) control TSAP */
+	irlan_provider_open_ctrl_tsap(new);
+
+	/* Do some fast discovery! */
+	irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS);
+
+	return 0;
+}
+
+static void __exit irlan_cleanup(void) 
+{
+	struct irlan_cb *self, *next;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	irlmp_unregister_client(ckey);
+	irlmp_unregister_service(skey);
+
+#ifdef CONFIG_PROC_FS
+	remove_proc_entry("irlan", proc_irda);
+#endif /* CONFIG_PROC_FS */
+
+	/* Cleanup any leftover network devices */
+	rtnl_lock();
+	list_for_each_entry_safe(self, next, &irlans, dev_list) {
+		__irlan_close(self);
+	}
+	rtnl_unlock();
+}
+
+/*
+ * Function irlan_open (void)
+ *
+ *    Open new instance of a client/provider, we should only register the 
+ *    network device if this instance is ment for a particular client/provider
+ */
+static struct irlan_cb *irlan_open(__u32 saddr, __u32 daddr)
+{
+	struct net_device *dev;
+	struct irlan_cb *self;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Create network device with irlan */
+	dev = alloc_irlandev(eth ? "eth%d" : "irlan%d");
+	if (!dev)
+		return NULL;
+
+	self = dev->priv;
+	self->dev = dev;
+
+	/*
+	 *  Initialize local device structure
+	 */
+	self->magic = IRLAN_MAGIC;
+	self->saddr = saddr;
+	self->daddr = daddr;
+
+	/* Provider access can only be PEER, DIRECT, or HOSTED */
+	self->provider.access_type = access;
+	if (access == ACCESS_DIRECT) {
+		/*  
+		 * Since we are emulating an IrLAN sever we will have to
+		 * give ourself an ethernet address!  
+		 */
+		dev->dev_addr[0] = 0x40;
+		dev->dev_addr[1] = 0x00;
+		dev->dev_addr[2] = 0x00;
+		dev->dev_addr[3] = 0x00;
+		get_random_bytes(dev->dev_addr+4, 1);
+		get_random_bytes(dev->dev_addr+5, 1);
+	}
+
+	self->media = MEDIA_802_3;
+	self->disconnect_reason = LM_USER_REQUEST;
+	init_timer(&self->watchdog_timer);
+	init_timer(&self->client.kick_timer);
+	init_waitqueue_head(&self->open_wait);	
+	
+	skb_queue_head_init(&self->client.txq);
+	
+	irlan_next_client_state(self, IRLAN_IDLE);
+	irlan_next_provider_state(self, IRLAN_IDLE);
+
+	if (register_netdev(dev)) {
+		IRDA_DEBUG(2, "%s(), register_netdev() failed!\n", 
+			   __FUNCTION__ );
+		self = NULL;
+		free_netdev(dev);
+	} else {
+		rtnl_lock();
+		list_add_rcu(&self->dev_list, &irlans);
+		rtnl_unlock();
+	}
+
+	return self;
+}
+/*
+ * Function __irlan_close (self)
+ *
+ *    This function closes and deallocates the IrLAN client instances. Be 
+ *    aware that other functions which calls client_close() must
+ *    remove self from irlans list first.
+ */
+static void __irlan_close(struct irlan_cb *self)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	
+	ASSERT_RTNL();
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	del_timer_sync(&self->watchdog_timer);
+	del_timer_sync(&self->client.kick_timer);
+
+	/* Close all open connections and remove TSAPs */
+	irlan_close_tsaps(self);
+	
+	if (self->client.iriap) 
+		iriap_close(self->client.iriap);
+
+	/* Remove frames queued on the control channel */
+	skb_queue_purge(&self->client.txq);
+
+	/* Unregister and free self via destructor */
+	unregister_netdevice(self->dev);
+}
+
+/* Find any instance of irlan, used for client discovery wakeup */
+struct irlan_cb *irlan_get_any(void)
+{
+	struct irlan_cb *self;
+
+	list_for_each_entry_rcu(self, &irlans, dev_list) {
+		return self;
+	}
+	return NULL;
+}
+
+/*
+ * Function irlan_connect_indication (instance, sap, qos, max_sdu_size, skb)
+ *
+ *    Here we receive the connect indication for the data channel
+ *
+ */
+static void irlan_connect_indication(void *instance, void *sap,
+				     struct qos_info *qos,
+				     __u32 max_sdu_size,
+				     __u8 max_header_size, 
+				     struct sk_buff *skb)
+{
+	struct irlan_cb *self;
+	struct tsap_cb *tsap;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	
+	self = (struct irlan_cb *) instance;
+	tsap = (struct tsap_cb *) sap;
+	
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	IRDA_ASSERT(tsap == self->tsap_data,return;);
+
+	self->max_sdu_size = max_sdu_size;
+	self->max_header_size = max_header_size;
+
+	IRDA_DEBUG(0, "%s: We are now connected!\n", __FUNCTION__);
+
+	del_timer(&self->watchdog_timer);
+
+	/* If you want to pass the skb to *both* state machines, you will
+	 * need to skb_clone() it, so that you don't free it twice.
+	 * As the state machines don't need it, git rid of it here...
+	 * Jean II */
+	if (skb)
+		dev_kfree_skb(skb);
+
+	irlan_do_provider_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL);
+	irlan_do_client_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL);
+
+	if (self->provider.access_type == ACCESS_PEER) {
+		/* 
+		 * Data channel is open, so we are now allowed to
+		 * configure the remote filter 
+		 */
+		irlan_get_unicast_addr(self);
+		irlan_open_unicast_addr(self);
+	}
+	/* Ready to transfer Ethernet frames (at last) */
+	netif_start_queue(self->dev); /* Clear reason */
+}
+
+static void irlan_connect_confirm(void *instance, void *sap,
+				  struct qos_info *qos, 
+				  __u32 max_sdu_size,
+				  __u8 max_header_size, 
+				  struct sk_buff *skb) 
+{
+	struct irlan_cb *self;
+
+	self = (struct irlan_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	self->max_sdu_size = max_sdu_size;
+	self->max_header_size = max_header_size;
+
+	/* TODO: we could set the MTU depending on the max_sdu_size */
+
+	IRDA_DEBUG(0, "%s: We are now connected!\n", __FUNCTION__);
+	del_timer(&self->watchdog_timer);
+
+	/* 
+	 * Data channel is open, so we are now allowed to configure the remote
+	 * filter 
+	 */
+	irlan_get_unicast_addr(self);
+	irlan_open_unicast_addr(self);
+	
+	/* Open broadcast and multicast filter by default */
+ 	irlan_set_broadcast_filter(self, TRUE);
+ 	irlan_set_multicast_filter(self, TRUE);
+
+	/* Ready to transfer Ethernet frames */
+	netif_start_queue(self->dev);
+	self->disconnect_reason = 0; /* Clear reason */
+#ifdef CONFIG_IRLAN_SEND_GRATUITOUS_ARP
+	irlan_eth_send_gratuitous_arp(&self->dev);
+#endif
+	wake_up_interruptible(&self->open_wait);
+}
+
+/*
+ * Function irlan_client_disconnect_indication (handle)
+ *
+ *    Callback function for the IrTTP layer. Indicates a disconnection of
+ *    the specified connection (handle)
+ */
+static void irlan_disconnect_indication(void *instance,
+					void *sap, LM_REASON reason, 
+					struct sk_buff *userdata) 
+{
+	struct irlan_cb *self;
+	struct tsap_cb *tsap;
+
+	IRDA_DEBUG(0, "%s(), reason=%d\n", __FUNCTION__ , reason);
+	
+	self = (struct irlan_cb *) instance;
+	tsap = (struct tsap_cb *) sap;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);	
+	IRDA_ASSERT(tsap != NULL, return;);
+	IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;);
+	
+	IRDA_ASSERT(tsap == self->tsap_data, return;);
+
+	IRDA_DEBUG(2, "IrLAN, data channel disconnected by peer!\n");
+
+	/* Save reason so we know if we should try to reconnect or not */
+	self->disconnect_reason = reason;
+	
+	switch (reason) {
+	case LM_USER_REQUEST: /* User request */
+		IRDA_DEBUG(2, "%s(), User requested\n", __FUNCTION__ );
+		break;
+	case LM_LAP_DISCONNECT: /* Unexpected IrLAP disconnect */
+		IRDA_DEBUG(2, "%s(), Unexpected IrLAP disconnect\n", __FUNCTION__ );
+		break;
+	case LM_CONNECT_FAILURE: /* Failed to establish IrLAP connection */
+		IRDA_DEBUG(2, "%s(), IrLAP connect failed\n", __FUNCTION__ );
+		break;
+	case LM_LAP_RESET:  /* IrLAP reset */
+		IRDA_DEBUG(2, "%s(), IrLAP reset\n", __FUNCTION__ );
+		break;
+	case LM_INIT_DISCONNECT:
+		IRDA_DEBUG(2, "%s(), IrLMP connect failed\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_ERROR("%s(), Unknown disconnect reason\n", __FUNCTION__);
+		break;
+	}
+	
+	/* If you want to pass the skb to *both* state machines, you will
+	 * need to skb_clone() it, so that you don't free it twice.
+	 * As the state machines don't need it, git rid of it here...
+	 * Jean II */
+	if (userdata)
+		dev_kfree_skb(userdata);
+
+	irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
+	irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
+	
+	wake_up_interruptible(&self->open_wait);
+}
+
+void irlan_open_data_tsap(struct irlan_cb *self)
+{
+	struct tsap_cb *tsap;
+	notify_t notify;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* Check if already open */
+	if (self->tsap_data)
+		return;
+
+	irda_notify_init(&notify);
+	
+	notify.data_indication       = irlan_eth_receive;
+	notify.udata_indication      = irlan_eth_receive;
+	notify.connect_indication    = irlan_connect_indication;
+	notify.connect_confirm       = irlan_connect_confirm;
+ 	notify.flow_indication       = irlan_eth_flow_indication;
+	notify.disconnect_indication = irlan_disconnect_indication;
+	notify.instance              = self;
+	strlcpy(notify.name, "IrLAN data", sizeof(notify.name));
+
+	tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, &notify);
+	if (!tsap) {
+		IRDA_DEBUG(2, "%s(), Got no tsap!\n", __FUNCTION__ );
+		return;
+	}
+	self->tsap_data = tsap;
+
+	/* 
+	 *  This is the data TSAP selector which we will pass to the client
+	 *  when the client ask for it.
+	 */
+	self->stsap_sel_data = self->tsap_data->stsap_sel;
+}
+
+void irlan_close_tsaps(struct irlan_cb *self)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* Disconnect and close all open TSAP connections */
+	if (self->tsap_data) {
+		irttp_disconnect_request(self->tsap_data, NULL, P_NORMAL);
+		irttp_close_tsap(self->tsap_data);
+		self->tsap_data = NULL;
+	}
+	if (self->client.tsap_ctrl) {
+		irttp_disconnect_request(self->client.tsap_ctrl, NULL, 
+					 P_NORMAL);
+		irttp_close_tsap(self->client.tsap_ctrl);
+		self->client.tsap_ctrl = NULL;
+	}
+	if (self->provider.tsap_ctrl) {
+		irttp_disconnect_request(self->provider.tsap_ctrl, NULL, 
+					 P_NORMAL);
+		irttp_close_tsap(self->provider.tsap_ctrl);
+		self->provider.tsap_ctrl = NULL;
+	}
+	self->disconnect_reason = LM_USER_REQUEST;
+}
+
+/*
+ * Function irlan_ias_register (self, tsap_sel)
+ *
+ *    Register with LM-IAS
+ *
+ */
+void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel)
+{
+	struct ias_object *obj;
+	struct ias_value *new_value;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	/* 
+	 * Check if object has already been registered by a previous provider.
+	 * If that is the case, we just change the value of the attribute
+	 */
+	if (!irias_find_object("IrLAN")) {
+		obj = irias_new_object("IrLAN", IAS_IRLAN_ID);
+		irias_add_integer_attrib(obj, "IrDA:TinyTP:LsapSel", tsap_sel,
+					 IAS_KERNEL_ATTR);
+		irias_insert_object(obj);
+	} else {
+		new_value = irias_new_integer_value(tsap_sel);
+		irias_object_change_attribute("IrLAN", "IrDA:TinyTP:LsapSel",
+					      new_value);
+	}
+	
+        /* Register PnP object only if not registered before */
+        if (!irias_find_object("PnP")) {
+		obj = irias_new_object("PnP", IAS_PNP_ID);
+#if 0
+		irias_add_string_attrib(obj, "Name", sysctl_devname,
+					IAS_KERNEL_ATTR);
+#else
+		irias_add_string_attrib(obj, "Name", "Linux", IAS_KERNEL_ATTR);
+#endif
+		irias_add_string_attrib(obj, "DeviceID", "HWP19F0",
+					IAS_KERNEL_ATTR);
+		irias_add_integer_attrib(obj, "CompCnt", 1, IAS_KERNEL_ATTR);
+		if (self->provider.access_type == ACCESS_PEER)
+			irias_add_string_attrib(obj, "Comp#01", "PNP8389",
+						IAS_KERNEL_ATTR);
+		else
+			irias_add_string_attrib(obj, "Comp#01", "PNP8294",
+						IAS_KERNEL_ATTR);
+
+		irias_add_string_attrib(obj, "Manufacturer",
+					"Linux-IrDA Project", IAS_KERNEL_ATTR);
+		irias_insert_object(obj);
+	}
+}
+
+/*
+ * Function irlan_run_ctrl_tx_queue (self)
+ *
+ *    Try to send the next command in the control transmit queue
+ *
+ */
+int irlan_run_ctrl_tx_queue(struct irlan_cb *self)
+{
+	struct sk_buff *skb;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	if (irda_lock(&self->client.tx_busy) == FALSE)
+		return -EBUSY;
+
+	skb = skb_dequeue(&self->client.txq);
+	if (!skb) {
+		self->client.tx_busy = FALSE;
+		return 0;
+	}
+	
+	/* Check that it's really possible to send commands */
+	if ((self->client.tsap_ctrl == NULL) || 
+	    (self->client.state == IRLAN_IDLE)) 
+	{
+		self->client.tx_busy = FALSE;
+		dev_kfree_skb(skb);
+		return -1;
+	}
+	IRDA_DEBUG(2, "%s(), sending ...\n", __FUNCTION__ );
+
+	return irttp_data_request(self->client.tsap_ctrl, skb);
+}
+
+/*
+ * Function irlan_ctrl_data_request (self, skb)
+ *
+ *    This function makes sure that commands on the control channel is being
+ *    sent in a command/response fashion
+ */
+static void irlan_ctrl_data_request(struct irlan_cb *self, struct sk_buff *skb)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Queue command */
+	skb_queue_tail(&self->client.txq, skb);
+
+	/* Try to send command */
+	irlan_run_ctrl_tx_queue(self);
+}
+
+/*
+ * Function irlan_get_provider_info (self)
+ *
+ *    Send Get Provider Information command to peer IrLAN layer
+ *
+ */
+void irlan_get_provider_info(struct irlan_cb *self)
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	skb = dev_alloc_skb(64);
+	if (!skb)
+		return;
+
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+ 	frame[0] = CMD_GET_PROVIDER_INFO;
+	frame[1] = 0x00;                 /* Zero parameters */
+	
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_open_data_channel (self)
+ *
+ *    Send an Open Data Command to provider
+ *
+ */
+void irlan_open_data_channel(struct irlan_cb *self) 
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	skb = dev_alloc_skb(64);
+	if (!skb)
+		return;
+
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+	/* Build frame */
+ 	frame[0] = CMD_OPEN_DATA_CHANNEL;
+	frame[1] = 0x02; /* Two parameters */
+
+	irlan_insert_string_param(skb, "MEDIA", "802.3");
+	irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT");
+	/* irlan_insert_string_param(skb, "MODE", "UNRELIABLE"); */
+
+/* 	self->use_udata = TRUE; */
+
+	irlan_ctrl_data_request(self, skb);
+}
+
+void irlan_close_data_channel(struct irlan_cb *self) 
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* Check if the TSAP is still there */
+	if (self->client.tsap_ctrl == NULL)
+		return;
+
+	skb = dev_alloc_skb(64);
+	if (!skb)
+		return;
+
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+	/* Build frame */
+ 	frame[0] = CMD_CLOSE_DATA_CHAN;
+	frame[1] = 0x01; /* Two parameters */
+
+	irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_open_unicast_addr (self)
+ *
+ *    Make IrLAN provider accept ethernet frames addressed to the unicast 
+ *    address.
+ *
+ */
+static void irlan_open_unicast_addr(struct irlan_cb *self)
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);	
+	
+	skb = dev_alloc_skb(128);
+	if (!skb)
+		return;
+
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+ 	frame[0] = CMD_FILTER_OPERATION;
+	frame[1] = 0x03;                 /* Three parameters */
+ 	irlan_insert_byte_param(skb, "DATA_CHAN" , self->dtsap_sel_data);
+ 	irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED");
+ 	irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); 
+	
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_set_broadcast_filter (self, status)
+ *
+ *    Make IrLAN provider accept ethernet frames addressed to the broadcast
+ *    address. Be careful with the use of this one, since there may be a lot
+ *    of broadcast traffic out there. We can still function without this
+ *    one but then _we_ have to initiate all communication with other
+ *    hosts, since ARP request for this host will not be answered.
+ */
+void irlan_set_broadcast_filter(struct irlan_cb *self, int status) 
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+ 	skb = dev_alloc_skb(128);
+	if (!skb)
+		return;
+
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+ 	frame[0] = CMD_FILTER_OPERATION;
+	frame[1] = 0x03;                 /* Three parameters */
+ 	irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+ 	irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST");
+	if (status)
+		irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); 
+	else
+		irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); 
+
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_set_multicast_filter (self, status)
+ *
+ *    Make IrLAN provider accept ethernet frames addressed to the multicast
+ *    address. 
+ *
+ */
+void irlan_set_multicast_filter(struct irlan_cb *self, int status) 
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+ 	skb = dev_alloc_skb(128);
+	if (!skb)
+		return;
+	
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+ 	frame[0] = CMD_FILTER_OPERATION;
+	frame[1] = 0x03;                 /* Three parameters */
+ 	irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+ 	irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST");
+	if (status)
+		irlan_insert_string_param(skb, "FILTER_MODE", "ALL"); 
+	else
+		irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); 
+
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_get_unicast_addr (self)
+ *
+ *    Retrieves the unicast address from the IrLAN provider. This address
+ *    will be inserted into the devices structure, so the ethernet layer
+ *    can construct its packets.
+ *
+ */
+static void irlan_get_unicast_addr(struct irlan_cb *self)
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+		
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	skb = dev_alloc_skb(128);
+	if (!skb)
+		return;
+
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+ 	frame[0] = CMD_FILTER_OPERATION;
+	frame[1] = 0x03;                 /* Three parameters */
+ 	irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data);
+ 	irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED");
+ 	irlan_insert_string_param(skb, "FILTER_OPERATION", "DYNAMIC"); 
+	
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function irlan_get_media_char (self)
+ *
+ *    
+ *
+ */
+void irlan_get_media_char(struct irlan_cb *self) 
+{
+	struct sk_buff *skb;
+	__u8 *frame;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	skb = dev_alloc_skb(64);
+	if (!skb)
+		return;
+
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->client.max_header_size);
+	skb_put(skb, 2);
+	
+	frame = skb->data;
+	
+	/* Build frame */
+ 	frame[0] = CMD_GET_MEDIA_CHAR;
+	frame[1] = 0x01; /* One parameter */
+	
+	irlan_insert_string_param(skb, "MEDIA", "802.3");
+	irlan_ctrl_data_request(self, skb);
+}
+
+/*
+ * Function insert_byte_param (skb, param, value)
+ *
+ *    Insert byte parameter into frame
+ *
+ */
+int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value)
+{
+	return __irlan_insert_param(skb, param, IRLAN_BYTE, value, 0, NULL, 0);
+}
+
+int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value)
+{
+	return __irlan_insert_param(skb, param, IRLAN_SHORT, 0, value, NULL, 0);
+}
+
+/*
+ * Function insert_string (skb, param, value)
+ *
+ *    Insert string parameter into frame
+ *
+ */
+int irlan_insert_string_param(struct sk_buff *skb, char *param, char *string)
+{
+	int string_len = strlen(string);
+
+	return __irlan_insert_param(skb, param, IRLAN_ARRAY, 0, 0, string, 
+				    string_len);
+}
+
+/*
+ * Function insert_array_param(skb, param, value, len_value)
+ *
+ *    Insert array parameter into frame
+ *
+ */
+int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *array,
+			     __u16 array_len)
+{
+	return __irlan_insert_param(skb, name, IRLAN_ARRAY, 0, 0, array, 
+				    array_len);
+}
+
+/*
+ * Function insert_param (skb, param, value, byte)
+ *
+ *    Insert parameter at end of buffer, structure of a parameter is:
+ *
+ *    -----------------------------------------------------------------------
+ *    | Name Length[1] | Param Name[1..255] | Val Length[2] | Value[0..1016]|
+ *    -----------------------------------------------------------------------
+ */
+static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, 
+				__u8 value_byte, __u16 value_short, 
+				__u8 *value_array, __u16 value_len)
+{
+	__u8 *frame;
+	__u8 param_len;
+	__u16 tmp_le; /* Temporary value in little endian format */
+	int n=0;
+	
+	if (skb == NULL) {
+		IRDA_DEBUG(2, "%s(), Got NULL skb\n", __FUNCTION__ );
+		return 0;
+	}	
+
+	param_len = strlen(param);
+	switch (type) {
+	case IRLAN_BYTE:
+		value_len = 1;
+		break;
+	case IRLAN_SHORT:
+		value_len = 2;
+		break;
+	case IRLAN_ARRAY:
+		IRDA_ASSERT(value_array != NULL, return 0;);
+		IRDA_ASSERT(value_len > 0, return 0;);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown parameter type!\n", __FUNCTION__ );
+		return 0;
+		break;
+	}
+	
+	/* Insert at end of sk-buffer */
+	frame = skb->tail;
+
+	/* Make space for data */
+	if (skb_tailroom(skb) < (param_len+value_len+3)) {
+		IRDA_DEBUG(2, "%s(), No more space at end of skb\n", __FUNCTION__ );
+		return 0;
+	}	
+	skb_put(skb, param_len+value_len+3);
+	
+	/* Insert parameter length */
+	frame[n++] = param_len;
+	
+	/* Insert parameter */
+	memcpy(frame+n, param, param_len); n += param_len;
+	
+	/* Insert value length (2 byte little endian format, LSB first) */
+	tmp_le = cpu_to_le16(value_len);
+	memcpy(frame+n, &tmp_le, 2); n += 2; /* To avoid alignment problems */
+
+	/* Insert value */
+	switch (type) {
+	case IRLAN_BYTE:
+		frame[n++] = value_byte;
+		break;
+	case IRLAN_SHORT:
+		tmp_le = cpu_to_le16(value_short);
+		memcpy(frame+n, &tmp_le, 2); n += 2;
+		break;
+	case IRLAN_ARRAY:
+		memcpy(frame+n, value_array, value_len); n+=value_len;
+		break;
+	default:
+		break;
+	}
+	IRDA_ASSERT(n == (param_len+value_len+3), return 0;);
+
+	return param_len+value_len+3;
+}
+
+/*
+ * Function irlan_extract_param (buf, name, value, len)
+ *
+ *    Extracts a single parameter name/value pair from buffer and updates
+ *    the buffer pointer to point to the next name/value pair. 
+ */
+int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len)
+{
+	__u8 name_len;
+	__u16 val_len;
+	int n=0;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	/* get length of parameter name (1 byte) */
+	name_len = buf[n++];
+	
+	if (name_len > 254) {
+		IRDA_DEBUG(2, "%s(), name_len > 254\n", __FUNCTION__ );
+		return -RSP_INVALID_COMMAND_FORMAT;
+	}
+	
+	/* get parameter name */
+	memcpy(name, buf+n, name_len);
+	name[name_len] = '\0';
+	n+=name_len;
+	
+	/*  
+	 *  Get length of parameter value (2 bytes in little endian 
+	 *  format) 
+	 */
+	memcpy(&val_len, buf+n, 2); /* To avoid alignment problems */
+	le16_to_cpus(&val_len); n+=2;
+	
+	if (val_len > 1016) {
+		IRDA_DEBUG(2, "%s(), parameter length to long\n", __FUNCTION__ );
+		return -RSP_INVALID_COMMAND_FORMAT;
+	}
+	*len = val_len;
+
+	/* get parameter value */
+	memcpy(value, buf+n, val_len);
+	value[val_len] = '\0';
+	n+=val_len;
+	
+	IRDA_DEBUG(4, "Parameter: %s ", name); 
+	IRDA_DEBUG(4, "Value: %s\n", value); 
+
+	return n;
+}
+
+#ifdef CONFIG_PROC_FS
+
+/*
+ * Start of reading /proc entries.
+ * Return entry at pos, 
+ *	or start_token to indicate print header line
+ *	or NULL if end of file
+ */
+static void *irlan_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	int i = 1;
+	struct irlan_cb *self;
+
+	rcu_read_lock();
+	if (*pos == 0)
+		return SEQ_START_TOKEN;
+
+	list_for_each_entry(self, &irlans, dev_list) {
+		if (*pos == i) 
+			return self;
+		++i;
+	}
+	return NULL;
+}
+
+/* Return entry after v, and increment pos */
+static void *irlan_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct list_head *nxt;
+
+	++*pos;
+	if (v == SEQ_START_TOKEN) 
+		nxt = irlans.next;
+	else
+		nxt = ((struct irlan_cb *)v)->dev_list.next;
+
+	return (nxt == &irlans) ? NULL 
+		: list_entry(nxt, struct irlan_cb, dev_list);
+}
+
+/* End of reading /proc file */
+static void irlan_seq_stop(struct seq_file *seq, void *v)
+{
+	rcu_read_unlock();
+}
+
+
+/*
+ * Show one entry in /proc file.
+ */
+static int irlan_seq_show(struct seq_file *seq, void *v)
+{
+	if (v == SEQ_START_TOKEN)
+		seq_puts(seq, "IrLAN instances:\n");
+	else {
+		struct irlan_cb *self = v;
+		
+		IRDA_ASSERT(self != NULL, return -1;);
+		IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+		seq_printf(seq,"ifname: %s,\n",
+			       self->dev->name);
+		seq_printf(seq,"client state: %s, ",
+			       irlan_state[ self->client.state]);
+		seq_printf(seq,"provider state: %s,\n",
+			       irlan_state[ self->provider.state]);
+		seq_printf(seq,"saddr: %#08x, ",
+			       self->saddr);
+		seq_printf(seq,"daddr: %#08x\n",
+			       self->daddr);
+		seq_printf(seq,"version: %d.%d,\n",
+			       self->version[1], self->version[0]);
+		seq_printf(seq,"access type: %s\n", 
+			       irlan_access[self->client.access_type]);
+		seq_printf(seq,"media: %s\n", 
+			       irlan_media[self->media]);
+		
+		seq_printf(seq,"local filter:\n");
+		seq_printf(seq,"remote filter: ");
+		irlan_print_filter(seq, self->client.filter_type);
+		seq_printf(seq,"tx busy: %s\n", 
+			       netif_queue_stopped(self->dev) ? "TRUE" : "FALSE");
+			
+		seq_putc(seq,'\n');
+	}
+	return 0;
+}
+
+static struct seq_operations irlan_seq_ops = {
+	.start = irlan_seq_start,
+	.next  = irlan_seq_next,
+	.stop  = irlan_seq_stop,
+	.show  = irlan_seq_show,
+};
+
+static int irlan_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &irlan_seq_ops);
+}
+#endif
+
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
+MODULE_DESCRIPTION("The Linux IrDA LAN protocol"); 
+MODULE_LICENSE("GPL");
+
+module_param(eth, bool, 0);
+MODULE_PARM_DESC(eth, "Name devices ethX (0) or irlanX (1)");
+module_param(access, int, 0);
+MODULE_PARM_DESC(access, "Access type DIRECT=1, PEER=2, HOSTED=3");
+
+module_init(irlan_init);
+module_exit(irlan_cleanup);
+
diff --git a/net/irda/irlan/irlan_eth.c b/net/irda/irlan/irlan_eth.c
new file mode 100644
index 00000000000..071cd2cefd8
--- /dev/null
+++ b/net/irda/irlan/irlan_eth.c
@@ -0,0 +1,387 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_eth.c
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Thu Oct 15 08:37:58 1998
+ * Modified at:   Tue Mar 21 09:06:41 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Sources:       skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
+ *                slip.c by Laurence Culhane,   <loz@holmes.demon.co.uk>
+ *                          Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/if_arp.h>
+#include <linux/module.h>
+#include <net/arp.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_client.h>
+#include <net/irda/irlan_event.h>
+#include <net/irda/irlan_eth.h>
+
+static int  irlan_eth_open(struct net_device *dev);
+static int  irlan_eth_close(struct net_device *dev);
+static int  irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev);
+static void irlan_eth_set_multicast_list( struct net_device *dev);
+static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev);
+
+/*
+ * Function irlan_eth_setup (dev)
+ *
+ *    The network device initialization function.
+ *
+ */
+static void irlan_eth_setup(struct net_device *dev)
+{
+	dev->open               = irlan_eth_open;
+	dev->stop               = irlan_eth_close;
+	dev->hard_start_xmit    = irlan_eth_xmit; 
+	dev->get_stats	        = irlan_eth_get_stats;
+	dev->set_multicast_list = irlan_eth_set_multicast_list;
+	dev->destructor		= free_netdev;
+
+	SET_MODULE_OWNER(dev);
+
+	ether_setup(dev);
+	
+	/* 
+	 * Lets do all queueing in IrTTP instead of this device driver.
+	 * Queueing here as well can introduce some strange latency
+	 * problems, which we will avoid by setting the queue size to 0.
+	 */
+	/*
+	 * The bugs in IrTTP and IrLAN that created this latency issue
+	 * have now been fixed, and we can propagate flow control properly
+	 * to the network layer. However, this requires a minimal queue of
+	 * packets for the device.
+	 * Without flow control, the Tx Queue is 14 (ttp) + 0 (dev) = 14
+	 * With flow control, the Tx Queue is 7 (ttp) + 4 (dev) = 11
+	 * See irlan_eth_flow_indication()...
+	 * Note : this number was randomly selected and would need to
+	 * be adjusted.
+	 * Jean II */
+	dev->tx_queue_len = 4;
+}
+
+/*
+ * Function alloc_irlandev
+ *
+ *    Allocate network device and control block
+ *
+ */
+struct net_device *alloc_irlandev(const char *name)
+{
+	return alloc_netdev(sizeof(struct irlan_cb), name,
+			    irlan_eth_setup);
+}
+
+/*
+ * Function irlan_eth_open (dev)
+ *
+ *    Network device has been opened by user
+ *
+ */
+static int irlan_eth_open(struct net_device *dev)
+{
+	struct irlan_cb *self = netdev_priv(dev);
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Ready to play! */
+ 	netif_stop_queue(dev); /* Wait until data link is ready */
+
+	/* We are now open, so time to do some work */
+	self->disconnect_reason = 0;
+	irlan_client_wakeup(self, self->saddr, self->daddr);
+
+	/* Make sure we have a hardware address before we return, 
+	   so DHCP clients gets happy */
+	return wait_event_interruptible(self->open_wait,
+					!self->tsap_data->connected);
+}
+
+/*
+ * Function irlan_eth_close (dev)
+ *
+ *    Stop the ether network device, his function will usually be called by
+ *    ifconfig down. We should now disconnect the link, We start the 
+ *    close timer, so that the instance will be removed if we are unable
+ *    to discover the remote device after the disconnect.
+ */
+static int irlan_eth_close(struct net_device *dev)
+{
+	struct irlan_cb *self = netdev_priv(dev);
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+	
+	/* Stop device */
+	netif_stop_queue(dev);
+	
+	irlan_close_data_channel(self);
+	irlan_close_tsaps(self);
+
+	irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL);
+	irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);	
+	
+	/* Remove frames queued on the control channel */
+	skb_queue_purge(&self->client.txq);
+
+	self->client.tx_busy = 0;
+	
+	return 0;
+}
+
+/*
+ * Function irlan_eth_tx (skb)
+ *
+ *    Transmits ethernet frames over IrDA link.
+ *
+ */
+static int irlan_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct irlan_cb *self = netdev_priv(dev);
+	int ret;
+
+	/* skb headroom large enough to contain all IrDA-headers? */
+	if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) {
+		struct sk_buff *new_skb = 
+			skb_realloc_headroom(skb, self->max_header_size);
+
+		/*  We have to free the original skb anyway */
+		dev_kfree_skb(skb);
+
+		/* Did the realloc succeed? */
+		if (new_skb == NULL)
+			return 0;
+
+		/* Use the new skb instead */
+		skb = new_skb;
+	} 
+
+	dev->trans_start = jiffies;
+
+	/* Now queue the packet in the transport layer */
+	if (self->use_udata)
+		ret = irttp_udata_request(self->tsap_data, skb);
+	else
+		ret = irttp_data_request(self->tsap_data, skb);
+
+	if (ret < 0) {
+		/*   
+		 * IrTTPs tx queue is full, so we just have to
+		 * drop the frame! You might think that we should
+		 * just return -1 and don't deallocate the frame,
+		 * but that is dangerous since it's possible that
+		 * we have replaced the original skb with a new
+		 * one with larger headroom, and that would really
+		 * confuse do_dev_queue_xmit() in dev.c! I have
+		 * tried :-) DB 
+		 */
+		/* irttp_data_request already free the packet */
+		self->stats.tx_dropped++;
+	} else {
+		self->stats.tx_packets++;
+		self->stats.tx_bytes += skb->len; 
+	}
+	
+	return 0;
+}
+
+/*
+ * Function irlan_eth_receive (handle, skb)
+ *
+ *    This function gets the data that is received on the data channel
+ *
+ */
+int irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb)
+{
+	struct irlan_cb *self = instance;
+
+	if (skb == NULL) {
+		++self->stats.rx_dropped; 
+		return 0;
+	}
+	if (skb->len < ETH_HLEN) {
+		IRDA_DEBUG(0, "%s() : IrLAN frame too short (%d)\n",
+			   __FUNCTION__, skb->len);
+		++self->stats.rx_dropped; 
+		dev_kfree_skb(skb);
+		return 0;
+	}
+		
+	/* 
+	 * Adopt this frame! Important to set all these fields since they 
+	 * might have been previously set by the low level IrDA network
+	 * device driver 
+	 */
+	skb->dev = self->dev;
+	skb->protocol=eth_type_trans(skb, skb->dev); /* Remove eth header */
+	
+	self->stats.rx_packets++;
+	self->stats.rx_bytes += skb->len; 
+
+	netif_rx(skb);   /* Eat it! */
+	
+	return 0;
+}
+
+/*
+ * Function irlan_eth_flow (status)
+ *
+ *    Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by 
+ *    controlling the queue stop/start.
+ *
+ * The IrDA link layer has the advantage to have flow control, and
+ * IrTTP now properly handles that. Flow controlling the higher layers
+ * prevent us to drop Tx packets in here (up to 15% for a TCP socket,
+ * more for UDP socket).
+ * Also, this allow us to reduce the overall transmit queue, which means
+ * less latency in case of mixed traffic.
+ * Jean II
+ */
+void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
+{
+	struct irlan_cb *self;
+	struct net_device *dev;
+
+	self = (struct irlan_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	dev = self->dev;
+
+	IRDA_ASSERT(dev != NULL, return;);
+	
+	IRDA_DEBUG(0, "%s() : flow %s ; running %d\n", __FUNCTION__,
+		   flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START",
+		   netif_running(dev));
+
+	switch (flow) {
+	case FLOW_STOP:
+		/* IrTTP is full, stop higher layers */
+		netif_stop_queue(dev);
+		break;
+	case FLOW_START:
+	default:
+		/* Tell upper layers that its time to transmit frames again */
+		/* Schedule network layer */
+		netif_wake_queue(dev);
+		break;
+	}
+}
+
+/*
+ * Function irlan_etc_send_gratuitous_arp (dev)
+ *
+ *    Send gratuitous ARP to announce that we have changed
+ *    hardware address, so that all peers updates their ARP tables
+ */
+void irlan_eth_send_gratuitous_arp(struct net_device *dev)
+{
+	struct in_device *in_dev;
+
+	/* 
+	 * When we get a new MAC address do a gratuitous ARP. This
+	 * is useful if we have changed access points on the same
+	 * subnet.  
+	 */
+#ifdef CONFIG_INET
+	IRDA_DEBUG(4, "IrLAN: Sending gratuitous ARP\n");
+	rcu_read_lock();
+	in_dev = __in_dev_get(dev);
+	if (in_dev == NULL)
+		goto out;
+	if (in_dev->ifa_list)
+		
+	arp_send(ARPOP_REQUEST, ETH_P_ARP, 
+		 in_dev->ifa_list->ifa_address,
+		 dev, 
+		 in_dev->ifa_list->ifa_address,
+		 NULL, dev->dev_addr, NULL);
+out:
+	rcu_read_unlock();
+#endif /* CONFIG_INET */
+}
+
+/*
+ * Function set_multicast_list (dev)
+ *
+ *    Configure the filtering of the device
+ *
+ */
+#define HW_MAX_ADDRS 4 /* Must query to get it! */
+static void irlan_eth_set_multicast_list(struct net_device *dev) 
+{
+ 	struct irlan_cb *self = netdev_priv(dev);
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
+
+	/* Check if data channel has been connected yet */
+	if (self->client.state != IRLAN_DATA) {
+		IRDA_DEBUG(1, "%s(), delaying!\n", __FUNCTION__ );
+		return;
+	}
+
+	if (dev->flags & IFF_PROMISC) {
+		/* Enable promiscuous mode */
+		IRDA_WARNING("Promiscous mode not implemented by IrLAN!\n");
+	} 
+	else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS) {
+		/* Disable promiscuous mode, use normal mode. */
+		IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __FUNCTION__ );
+		/* hardware_set_filter(NULL); */
+
+		irlan_set_multicast_filter(self, TRUE);
+	}
+	else if (dev->mc_count) {
+		IRDA_DEBUG(4, "%s(), Setting multicast filter\n", __FUNCTION__ );
+		/* Walk the address list, and load the filter */
+		/* hardware_set_filter(dev->mc_list); */
+
+		irlan_set_multicast_filter(self, TRUE);
+	}
+	else {
+		IRDA_DEBUG(4, "%s(), Clearing multicast filter\n", __FUNCTION__ );
+		irlan_set_multicast_filter(self, FALSE);
+	}
+
+	if (dev->flags & IFF_BROADCAST)
+		irlan_set_broadcast_filter(self, TRUE);
+	else
+		irlan_set_broadcast_filter(self, FALSE);
+}
+
+/*
+ * Function irlan_get_stats (dev)
+ *
+ *    Get the current statistics for this device
+ *
+ */
+static struct net_device_stats *irlan_eth_get_stats(struct net_device *dev) 
+{
+	struct irlan_cb *self = netdev_priv(dev);
+
+	return &self->stats;
+}
diff --git a/net/irda/irlan/irlan_event.c b/net/irda/irlan/irlan_event.c
new file mode 100644
index 00000000000..2778d8c6aa3
--- /dev/null
+++ b/net/irda/irlan/irlan_event.c
@@ -0,0 +1,60 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_event.c
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Oct 20 09:10:16 1998
+ * Modified at:   Sat Oct 30 12:59:01 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <net/irda/irlan_event.h>
+
+char *irlan_state[] = {
+	"IRLAN_IDLE",
+	"IRLAN_QUERY",
+	"IRLAN_CONN",
+	"IRLAN_INFO",
+	"IRLAN_MEDIA",
+	"IRLAN_OPEN",
+	"IRLAN_WAIT",
+	"IRLAN_ARB",
+	"IRLAN_DATA",
+	"IRLAN_CLOSE",
+	"IRLAN_SYNC",
+};
+
+void irlan_next_client_state(struct irlan_cb *self, IRLAN_STATE state) 
+{
+	IRDA_DEBUG(2, "%s(), %s\n", __FUNCTION__ , irlan_state[state]);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	self->client.state = state;
+}
+
+void irlan_next_provider_state(struct irlan_cb *self, IRLAN_STATE state) 
+{
+	IRDA_DEBUG(2, "%s(), %s\n", __FUNCTION__ , irlan_state[state]);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	self->provider.state = state;
+}
+
diff --git a/net/irda/irlan/irlan_filter.c b/net/irda/irlan/irlan_filter.c
new file mode 100644
index 00000000000..343c5d4a1a1
--- /dev/null
+++ b/net/irda/irlan/irlan_filter.c
@@ -0,0 +1,246 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_filter.c
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Fri Jan 29 11:16:38 1999
+ * Modified at:   Sat Oct 30 12:58:45 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irlan_common.h>
+
+/*
+ * Function irlan_filter_request (self, skb)
+ *
+ *    Handle filter request from client peer device
+ *
+ */
+void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	if ((self->provider.filter_type == IRLAN_DIRECTED) && 
+	    (self->provider.filter_operation == DYNAMIC))
+	{
+		IRDA_DEBUG(0, "Giving peer a dynamic Ethernet address\n");
+		self->provider.mac_address[0] = 0x40;
+		self->provider.mac_address[1] = 0x00;
+		self->provider.mac_address[2] = 0x00;
+		self->provider.mac_address[3] = 0x00;
+		
+		/* Use arbitration value to generate MAC address */
+		if (self->provider.access_type == ACCESS_PEER) {
+			self->provider.mac_address[4] = 
+				self->provider.send_arb_val & 0xff;
+			self->provider.mac_address[5] = 
+				(self->provider.send_arb_val >> 8) & 0xff;
+		} else {
+			/* Just generate something for now */
+			get_random_bytes(self->provider.mac_address+4, 1);
+			get_random_bytes(self->provider.mac_address+5, 1);
+		}
+
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x03;
+		irlan_insert_string_param(skb, "FILTER_MODE", "NONE");
+		irlan_insert_short_param(skb, "MAX_ENTRY", 0x0001);
+		irlan_insert_array_param(skb, "FILTER_ENTRY", 
+					 self->provider.mac_address, 6);
+		return;
+	}
+	
+	if ((self->provider.filter_type == IRLAN_DIRECTED) && 
+	    (self->provider.filter_mode == FILTER))
+	{
+		IRDA_DEBUG(0, "Directed filter on\n");
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x00;
+		return;
+	}
+	if ((self->provider.filter_type == IRLAN_DIRECTED) && 
+	    (self->provider.filter_mode == NONE))
+	{
+		IRDA_DEBUG(0, "Directed filter off\n");
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x00;
+		return;
+	}
+
+	if ((self->provider.filter_type == IRLAN_BROADCAST) && 
+	    (self->provider.filter_mode == FILTER))
+	{
+		IRDA_DEBUG(0, "Broadcast filter on\n");
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x00;
+		return;
+	}
+	if ((self->provider.filter_type == IRLAN_BROADCAST) && 
+	    (self->provider.filter_mode == NONE))
+	{
+		IRDA_DEBUG(0, "Broadcast filter off\n");
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x00;
+		return;
+	}
+	if ((self->provider.filter_type == IRLAN_MULTICAST) && 
+	    (self->provider.filter_mode == FILTER))
+	{
+		IRDA_DEBUG(0, "Multicast filter on\n");
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x00;
+		return;
+	}
+	if ((self->provider.filter_type == IRLAN_MULTICAST) && 
+	    (self->provider.filter_mode == NONE))
+	{
+		IRDA_DEBUG(0, "Multicast filter off\n");
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x00;
+		return;
+	}
+	if ((self->provider.filter_type == IRLAN_MULTICAST) && 
+	    (self->provider.filter_operation == GET))
+	{
+		IRDA_DEBUG(0, "Multicast filter get\n");
+		skb->data[0] = 0x00; /* Success? */
+		skb->data[1] = 0x02;
+		irlan_insert_string_param(skb, "FILTER_MODE", "NONE");
+		irlan_insert_short_param(skb, "MAX_ENTRY", 16);
+		return;
+	}
+	skb->data[0] = 0x00; /* Command not supported */
+	skb->data[1] = 0x00;
+
+	IRDA_DEBUG(0, "Not implemented!\n");
+}
+
+/*
+ * Function check_request_param (self, param, value)
+ *
+ *    Check parameters in request from peer device
+ *
+ */
+void irlan_check_command_param(struct irlan_cb *self, char *param, char *value)
+{
+	__u8 *bytes;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	bytes = value;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	IRDA_DEBUG(4, "%s, %s\n", param, value);
+
+	/*
+	 *  This is experimental!! DB.
+	 */
+	 if (strcmp(param, "MODE") == 0) {
+		IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+		self->use_udata = TRUE;
+		return;
+	}
+
+	/*
+	 *  FILTER_TYPE
+	 */
+	if (strcmp(param, "FILTER_TYPE") == 0) {
+		if (strcmp(value, "DIRECTED") == 0) {
+			self->provider.filter_type = IRLAN_DIRECTED;
+			return;
+		}
+		if (strcmp(value, "MULTICAST") == 0) {
+			self->provider.filter_type = IRLAN_MULTICAST;
+			return;
+		}
+		if (strcmp(value, "BROADCAST") == 0) {
+			self->provider.filter_type = IRLAN_BROADCAST;
+			return;
+		}
+	}
+	/*
+	 *  FILTER_MODE
+	 */
+	if (strcmp(param, "FILTER_MODE") == 0) {
+		if (strcmp(value, "ALL") == 0) {
+			self->provider.filter_mode = ALL;
+			return;
+		}
+		if (strcmp(value, "FILTER") == 0) {
+			self->provider.filter_mode = FILTER;
+			return;
+		}
+		if (strcmp(value, "NONE") == 0) {
+			self->provider.filter_mode = FILTER;
+			return;
+		}
+	}
+	/*
+	 *  FILTER_OPERATION
+	 */
+	if (strcmp(param, "FILTER_OPERATION") == 0) {
+		if (strcmp(value, "DYNAMIC") == 0) {
+			self->provider.filter_operation = DYNAMIC;
+			return;
+		}
+		if (strcmp(value, "GET") == 0) {
+			self->provider.filter_operation = GET;
+			return;
+		}
+	}
+}
+
+/*
+ * Function irlan_print_filter (filter_type, buf)
+ *
+ *    Print status of filter. Used by /proc file system
+ *
+ */
+#ifdef CONFIG_PROC_FS
+#define MASK2STR(m,s)	{ .mask = m, .str = s }
+
+void irlan_print_filter(struct seq_file *seq, int filter_type)
+{
+	static struct {
+		int mask;
+		const char *str;
+	} filter_mask2str[] = {
+		MASK2STR(IRLAN_DIRECTED,	"DIRECTED"),
+		MASK2STR(IRLAN_FUNCTIONAL,	"FUNCTIONAL"),
+		MASK2STR(IRLAN_GROUP,		"GROUP"),
+		MASK2STR(IRLAN_MAC_FRAME,	"MAC_FRAME"),
+		MASK2STR(IRLAN_MULTICAST,	"MULTICAST"),
+		MASK2STR(IRLAN_BROADCAST,	"BROADCAST"),
+		MASK2STR(IRLAN_IPX_SOCKET,	"IPX_SOCKET"),
+		MASK2STR(0,			NULL)
+	}, *p;
+
+	for (p = filter_mask2str; p->str; p++) {
+		if (filter_type & p->mask)
+			seq_printf(seq, "%s ", p->str);
+	}
+	seq_putc(seq, '\n');
+}
+#undef MASK2STR
+#endif
diff --git a/net/irda/irlan/irlan_provider.c b/net/irda/irlan/irlan_provider.c
new file mode 100644
index 00000000000..39c202d1c37
--- /dev/null
+++ b/net/irda/irlan/irlan_provider.c
@@ -0,0 +1,413 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_provider.c
+ * Version:       0.9
+ * Description:   IrDA LAN Access Protocol Implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sat Oct 30 12:52:10 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Sources:       skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
+ *                slip.c by Laurence Culhane,   <loz@holmes.demon.co.uk>
+ *                          Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irttp.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/iriap.h>
+#include <net/irda/timer.h>
+
+#include <net/irda/irlan_common.h>
+#include <net/irda/irlan_eth.h>
+#include <net/irda/irlan_event.h>
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_filter.h>
+#include <net/irda/irlan_client.h>
+
+static void irlan_provider_connect_indication(void *instance, void *sap, 
+					      struct qos_info *qos, 
+					      __u32 max_sdu_size,
+					      __u8 max_header_size,
+					      struct sk_buff *skb);
+
+/*
+ * Function irlan_provider_control_data_indication (handle, skb)
+ *
+ *    This function gets the data that is received on the control channel
+ *
+ */
+static int irlan_provider_data_indication(void *instance, void *sap, 
+					  struct sk_buff *skb) 
+{
+	struct irlan_cb *self;
+	__u8 code;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	self = (struct irlan_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	code = skb->data[0];
+	switch(code) {
+	case CMD_GET_PROVIDER_INFO:
+		IRDA_DEBUG(4, "Got GET_PROVIDER_INFO command!\n");
+		irlan_do_provider_event(self, IRLAN_GET_INFO_CMD, skb); 
+		break;
+
+	case CMD_GET_MEDIA_CHAR:
+		IRDA_DEBUG(4, "Got GET_MEDIA_CHAR command!\n");
+		irlan_do_provider_event(self, IRLAN_GET_MEDIA_CMD, skb); 
+		break;
+	case CMD_OPEN_DATA_CHANNEL:
+		IRDA_DEBUG(4, "Got OPEN_DATA_CHANNEL command!\n");
+		irlan_do_provider_event(self, IRLAN_OPEN_DATA_CMD, skb); 
+		break;
+	case CMD_FILTER_OPERATION:
+		IRDA_DEBUG(4, "Got FILTER_OPERATION command!\n");
+		irlan_do_provider_event(self, IRLAN_FILTER_CONFIG_CMD, skb);
+		break;
+	case CMD_RECONNECT_DATA_CHAN:
+		IRDA_DEBUG(2, "%s(), Got RECONNECT_DATA_CHAN command\n", __FUNCTION__ );
+		IRDA_DEBUG(2, "%s(), NOT IMPLEMENTED\n", __FUNCTION__ );
+		break;
+	case CMD_CLOSE_DATA_CHAN:
+		IRDA_DEBUG(2, "Got CLOSE_DATA_CHAN command!\n");
+		IRDA_DEBUG(2, "%s(), NOT IMPLEMENTED\n", __FUNCTION__ );
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown command!\n", __FUNCTION__ );
+		break;
+	}
+	return 0;
+}
+
+/*
+ * Function irlan_provider_connect_indication (handle, skb, priv)
+ *
+ *    Got connection from peer IrLAN client
+ *
+ */
+static void irlan_provider_connect_indication(void *instance, void *sap, 
+					      struct qos_info *qos,
+					      __u32 max_sdu_size, 
+					      __u8 max_header_size,
+					      struct sk_buff *skb)
+{
+	struct irlan_cb *self;
+	struct tsap_cb *tsap;
+	__u32 saddr, daddr;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__ );
+	
+	self = (struct irlan_cb *) instance;
+	tsap = (struct tsap_cb *) sap;
+	
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+	
+	IRDA_ASSERT(tsap == self->provider.tsap_ctrl,return;);
+	IRDA_ASSERT(self->provider.state == IRLAN_IDLE, return;);
+
+	daddr = irttp_get_daddr(tsap);
+	saddr = irttp_get_saddr(tsap);
+	self->provider.max_sdu_size = max_sdu_size;
+	self->provider.max_header_size = max_header_size;
+
+	irlan_do_provider_event(self, IRLAN_CONNECT_INDICATION, NULL);
+
+	/*  
+	 * If we are in peer mode, the client may not have got the discovery
+	 * indication it needs to make progress. If the client is still in 
+	 * IDLE state, we must kick it. 
+	 */
+	if ((self->provider.access_type == ACCESS_PEER) && 
+	    (self->client.state == IRLAN_IDLE)) 
+	{
+		irlan_client_wakeup(self, self->saddr, self->daddr);
+	}
+}
+
+/*
+ * Function irlan_provider_connect_response (handle)
+ *
+ *    Accept incoming connection
+ *
+ */
+void irlan_provider_connect_response(struct irlan_cb *self,
+				     struct tsap_cb *tsap)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	/* Just accept */
+	irttp_connect_response(tsap, IRLAN_MTU, NULL);
+}
+
+static void irlan_provider_disconnect_indication(void *instance, void *sap, 
+						 LM_REASON reason, 
+						 struct sk_buff *userdata) 
+{
+	struct irlan_cb *self;
+	struct tsap_cb *tsap;
+
+	IRDA_DEBUG(4, "%s(), reason=%d\n", __FUNCTION__ , reason);
+	
+	self = (struct irlan_cb *) instance;
+	tsap = (struct tsap_cb *) sap;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);	
+	IRDA_ASSERT(tsap != NULL, return;);
+	IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;);
+	
+	IRDA_ASSERT(tsap == self->provider.tsap_ctrl, return;);
+	
+	irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL);
+}
+
+/*
+ * Function irlan_parse_open_data_cmd (self, skb)
+ *
+ *    
+ *
+ */
+int irlan_parse_open_data_cmd(struct irlan_cb *self, struct sk_buff *skb)
+{
+	int ret;
+	
+	ret = irlan_provider_parse_command(self, CMD_OPEN_DATA_CHANNEL, skb);
+
+	/* Open data channel */
+	irlan_open_data_tsap(self);
+
+	return ret;
+}
+
+/*
+ * Function parse_command (skb)
+ *
+ *    Extract all parameters from received buffer, then feed them to 
+ *    check_params for parsing
+ *
+ */
+int irlan_provider_parse_command(struct irlan_cb *self, int cmd,
+				 struct sk_buff *skb) 
+{
+	__u8 *frame;
+	__u8 *ptr;
+	int count;
+	__u16 val_len;
+	int i;
+	char *name;
+        char *value;
+	int ret = RSP_SUCCESS;
+	
+	IRDA_ASSERT(skb != NULL, return -RSP_PROTOCOL_ERROR;);
+	
+	IRDA_DEBUG(4, "%s(), skb->len=%d\n", __FUNCTION__ , (int)skb->len);
+
+	IRDA_ASSERT(self != NULL, return -RSP_PROTOCOL_ERROR;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -RSP_PROTOCOL_ERROR;);
+	
+	if (!skb)
+		return -RSP_PROTOCOL_ERROR;
+
+	frame = skb->data;
+
+	name = kmalloc(255, GFP_ATOMIC);
+	if (!name)
+		return -RSP_INSUFFICIENT_RESOURCES;
+	value = kmalloc(1016, GFP_ATOMIC);
+	if (!value) {
+		kfree(name);
+		return -RSP_INSUFFICIENT_RESOURCES;
+	}
+
+	/* How many parameters? */
+	count = frame[1];
+
+	IRDA_DEBUG(4, "Got %d parameters\n", count);
+	
+	ptr = frame+2;
+	
+	/* For all parameters */
+ 	for (i=0; i<count;i++) {
+		ret = irlan_extract_param(ptr, name, value, &val_len);
+		if (ret < 0) {
+			IRDA_DEBUG(2, "%s(), IrLAN, Error!\n", __FUNCTION__ );
+			break;
+		}
+		ptr+=ret;
+		ret = RSP_SUCCESS;
+		irlan_check_command_param(self, name, value);
+	}
+	/* Cleanup */
+	kfree(name);
+	kfree(value);
+
+	return ret;
+}
+
+/*
+ * Function irlan_provider_send_reply (self, info)
+ *
+ *    Send reply to query to peer IrLAN layer
+ *
+ */
+void irlan_provider_send_reply(struct irlan_cb *self, int command, 
+			       int ret_code)
+{
+	struct sk_buff *skb;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;);
+
+	skb = dev_alloc_skb(128);
+	if (!skb)
+		return;
+
+	/* Reserve space for TTP, LMP, and LAP header */
+	skb_reserve(skb, self->provider.max_header_size);
+	skb_put(skb, 2);
+       
+	switch (command) {
+	case CMD_GET_PROVIDER_INFO:
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x02; /* 2 parameters */
+		switch (self->media) {
+		case MEDIA_802_3:
+			irlan_insert_string_param(skb, "MEDIA", "802.3");
+			break;
+		case MEDIA_802_5:
+			irlan_insert_string_param(skb, "MEDIA", "802.5");
+			break;
+		default:
+			IRDA_DEBUG(2, "%s(), unknown media type!\n", __FUNCTION__ );
+			break;
+		}
+		irlan_insert_short_param(skb, "IRLAN_VER", 0x0101);
+		break;
+
+	case CMD_GET_MEDIA_CHAR:
+		skb->data[0] = 0x00; /* Success */
+		skb->data[1] = 0x05; /* 5 parameters */
+		irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED");
+		irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST");
+		irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST");
+
+		switch (self->provider.access_type) {
+		case ACCESS_DIRECT:
+			irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT");
+			break;
+		case ACCESS_PEER:
+			irlan_insert_string_param(skb, "ACCESS_TYPE", "PEER");
+			break;
+		case ACCESS_HOSTED:
+			irlan_insert_string_param(skb, "ACCESS_TYPE", "HOSTED");
+			break;
+		default:
+			IRDA_DEBUG(2, "%s(), Unknown access type\n", __FUNCTION__ );
+			break;
+		}
+		irlan_insert_short_param(skb, "MAX_FRAME", 0x05ee);
+		break;
+	case CMD_OPEN_DATA_CHANNEL:
+		skb->data[0] = 0x00; /* Success */
+		if (self->provider.send_arb_val) {
+			skb->data[1] = 0x03; /* 3 parameters */
+			irlan_insert_short_param(skb, "CON_ARB", 
+						 self->provider.send_arb_val);
+		} else
+			skb->data[1] = 0x02; /* 2 parameters */
+		irlan_insert_byte_param(skb, "DATA_CHAN", self->stsap_sel_data);
+		irlan_insert_array_param(skb, "RECONNECT_KEY", "LINUX RULES!",
+					 12);
+		break;
+	case CMD_FILTER_OPERATION:
+		irlan_filter_request(self, skb);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown command!\n", __FUNCTION__ );
+		break;
+	}
+
+	irttp_data_request(self->provider.tsap_ctrl, skb);
+}
+
+/*
+ * Function irlan_provider_register(void)
+ *
+ *    Register provider support so we can accept incoming connections.
+ * 
+ */
+int irlan_provider_open_ctrl_tsap(struct irlan_cb *self)
+{
+	struct tsap_cb *tsap;
+	notify_t notify;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+	/* Check if already open */
+	if (self->provider.tsap_ctrl)
+		return -1;
+	
+	/*
+	 *  First register well known control TSAP
+	 */
+	irda_notify_init(&notify);
+	notify.data_indication       = irlan_provider_data_indication;
+	notify.connect_indication    = irlan_provider_connect_indication;
+	notify.disconnect_indication = irlan_provider_disconnect_indication;
+	notify.instance = self;
+	strlcpy(notify.name, "IrLAN ctrl (p)", sizeof(notify.name));
+
+	tsap = irttp_open_tsap(LSAP_ANY, 1, &notify);
+	if (!tsap) {
+		IRDA_DEBUG(2, "%s(), Got no tsap!\n", __FUNCTION__ );
+		return -1;
+	}
+	self->provider.tsap_ctrl = tsap;
+
+	/* Register with LM-IAS */
+	irlan_ias_register(self, tsap->stsap_sel);
+
+	return 0;
+}
+
diff --git a/net/irda/irlan/irlan_provider_event.c b/net/irda/irlan/irlan_provider_event.c
new file mode 100644
index 00000000000..5a086f9827e
--- /dev/null
+++ b/net/irda/irlan/irlan_provider_event.c
@@ -0,0 +1,241 @@
+/*********************************************************************
+ *                
+ * Filename:      irlan_provider_event.c
+ * Version:       0.9
+ * Description:   IrLAN provider state machine)
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:37 1997
+ * Modified at:   Sat Oct 30 12:52:41 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved.
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+
+#include <net/irda/irlan_provider.h>
+#include <net/irda/irlan_event.h>
+
+static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb);
+static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb);
+static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb);
+static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb);
+
+static int (*state[])(struct irlan_cb *self, IRLAN_EVENT event, 
+		      struct sk_buff *skb) = 
+{ 
+	irlan_provider_state_idle,
+	NULL, /* Query */
+	NULL, /* Info */
+	irlan_provider_state_info,
+	NULL, /* Media */
+	irlan_provider_state_open,
+	NULL, /* Wait */
+	NULL, /* Arb */
+	irlan_provider_state_data,
+	NULL, /* Close */
+	NULL, /* Sync */
+};
+
+void irlan_do_provider_event(struct irlan_cb *self, IRLAN_EVENT event, 
+			     struct sk_buff *skb) 
+{
+	IRDA_ASSERT(*state[ self->provider.state] != NULL, return;);
+
+	(*state[self->provider.state]) (self, event, skb);
+}
+
+/*
+ * Function irlan_provider_state_idle (event, skb, info)
+ *
+ *    IDLE, We are waiting for an indication that there is a provider
+ *    available.
+ */
+static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event,
+				     struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	
+	switch(event) {
+	case IRLAN_CONNECT_INDICATION:
+	     irlan_provider_connect_response( self, self->provider.tsap_ctrl);
+	     irlan_next_provider_state( self, IRLAN_INFO);
+	     break;
+	default:
+		IRDA_DEBUG(4, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function irlan_provider_state_info (self, event, skb, info)
+ *
+ *    INFO, We have issued a GetInfo command and is awaiting a reply.
+ */
+static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb) 
+{
+	int ret;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	switch(event) {
+	case IRLAN_GET_INFO_CMD:
+		/* Be sure to use 802.3 in case of peer mode */
+		if (self->provider.access_type == ACCESS_PEER) {
+			self->media = MEDIA_802_3;
+			
+			/* Check if client has started yet */
+			if (self->client.state == IRLAN_IDLE) {
+				/* This should get the client going */
+				irlmp_discovery_request(8);
+			}
+		}
+
+		irlan_provider_send_reply(self, CMD_GET_PROVIDER_INFO, 
+					  RSP_SUCCESS);
+		/* Keep state */
+		break;
+	case IRLAN_GET_MEDIA_CMD: 
+		irlan_provider_send_reply(self, CMD_GET_MEDIA_CHAR, 
+					  RSP_SUCCESS);
+		/* Keep state */
+		break;		
+	case IRLAN_OPEN_DATA_CMD:
+		ret = irlan_parse_open_data_cmd(self, skb);
+		if (self->provider.access_type == ACCESS_PEER) {
+			/* FIXME: make use of random functions! */
+			self->provider.send_arb_val = (jiffies & 0xffff);
+		}
+		irlan_provider_send_reply(self, CMD_OPEN_DATA_CHANNEL, ret);
+
+		if (ret == RSP_SUCCESS) {
+			irlan_next_provider_state(self, IRLAN_OPEN);
+
+			/* Signal client that we are now open */
+			irlan_do_client_event(self, IRLAN_PROVIDER_SIGNAL, NULL);
+		}
+		break;
+	case IRLAN_LMP_DISCONNECT:  /* FALLTHROUGH */
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_provider_state(self, IRLAN_IDLE);
+		break;
+	default:
+		IRDA_DEBUG( 0, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+/*
+ * Function irlan_provider_state_open (self, event, skb, info)
+ *
+ *    OPEN, The client has issued a OpenData command and is awaiting a
+ *    reply
+ *
+ */
+static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+
+	switch(event) {
+	case IRLAN_FILTER_CONFIG_CMD:
+		irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb);
+		irlan_provider_send_reply(self, CMD_FILTER_OPERATION, 
+					  RSP_SUCCESS);
+		/* Keep state */
+		break;
+	case IRLAN_DATA_CONNECT_INDICATION: 
+		irlan_next_provider_state(self, IRLAN_DATA);
+		irlan_provider_connect_response(self, self->tsap_data);
+		break;
+	case IRLAN_LMP_DISCONNECT:  /* FALLTHROUGH */
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_provider_state(self, IRLAN_IDLE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function irlan_provider_state_data (self, event, skb, info)
+ *
+ *    DATA, The data channel is connected, allowing data transfers between
+ *    the local and remote machines.
+ *
+ */
+static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event, 
+				     struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__ );
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;);
+
+	switch(event) {
+	case IRLAN_FILTER_CONFIG_CMD:
+		irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb);
+		irlan_provider_send_reply(self, CMD_FILTER_OPERATION, 
+					  RSP_SUCCESS);
+		break;
+	case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */
+	case IRLAN_LAP_DISCONNECT:
+		irlan_next_provider_state(self, IRLAN_IDLE);
+		break;
+	default:
+		IRDA_DEBUG( 0, "%s(), Unknown event %d\n", __FUNCTION__ , event);
+		break;
+	}
+	if (skb)
+		dev_kfree_skb(skb);
+	
+	return 0;
+}
+
+
+
+
+
+
+
+
+
+
diff --git a/net/irda/irlap.c b/net/irda/irlap.c
new file mode 100644
index 00000000000..046ad0750e4
--- /dev/null
+++ b/net/irda/irlap.c
@@ -0,0 +1,1258 @@
+/*********************************************************************
+ *
+ * Filename:      irlap.c
+ * Version:       1.0
+ * Description:   IrLAP implementation for Linux
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Tue Dec 14 09:26:44 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program; if not, write to the Free Software
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *     MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/random.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/irqueue.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/irlap.h>
+#include <net/irda/timer.h>
+#include <net/irda/qos.h>
+
+static hashbin_t *irlap = NULL;
+int sysctl_slot_timeout = SLOT_TIMEOUT * 1000 / HZ;
+
+/* This is the delay of missed pf period before generating an event
+ * to the application. The spec mandate 3 seconds, but in some cases
+ * it's way too long. - Jean II */
+int sysctl_warn_noreply_time = 3;
+
+extern void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb);
+static void __irlap_close(struct irlap_cb *self);
+static void irlap_init_qos_capabilities(struct irlap_cb *self,
+					struct qos_info *qos_user);
+
+#ifdef CONFIG_IRDA_DEBUG
+static char *lap_reasons[] = {
+	"ERROR, NOT USED",
+	"LAP_DISC_INDICATION",
+	"LAP_NO_RESPONSE",
+	"LAP_RESET_INDICATION",
+	"LAP_FOUND_NONE",
+	"LAP_MEDIA_BUSY",
+	"LAP_PRIMARY_CONFLICT",
+	"ERROR, NOT USED",
+};
+#endif	/* CONFIG_IRDA_DEBUG */
+
+int __init irlap_init(void)
+{
+	/* Check if the compiler did its job properly.
+	 * May happen on some ARM configuration, check with Russell King. */
+	IRDA_ASSERT(sizeof(struct xid_frame) == 14, ;);
+	IRDA_ASSERT(sizeof(struct test_frame) == 10, ;);
+	IRDA_ASSERT(sizeof(struct ua_frame) == 10, ;);
+	IRDA_ASSERT(sizeof(struct snrm_frame) == 11, ;);
+
+	/* Allocate master array */
+	irlap = hashbin_new(HB_LOCK);
+	if (irlap == NULL) {
+	        IRDA_ERROR("%s: can't allocate irlap hashbin!\n",
+			   __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+void __exit irlap_cleanup(void)
+{
+	IRDA_ASSERT(irlap != NULL, return;);
+
+	hashbin_delete(irlap, (FREE_FUNC) __irlap_close);
+}
+
+/*
+ * Function irlap_open (driver)
+ *
+ *    Initialize IrLAP layer
+ *
+ */
+struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos,
+			    const char *hw_name)
+{
+	struct irlap_cb *self;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/* Initialize the irlap structure. */
+	self = kmalloc(sizeof(struct irlap_cb), GFP_KERNEL);
+	if (self == NULL)
+		return NULL;
+
+	memset(self, 0, sizeof(struct irlap_cb));
+	self->magic = LAP_MAGIC;
+
+	/* Make a binding between the layers */
+	self->netdev = dev;
+	self->qos_dev = qos;
+	/* Copy hardware name */
+	if(hw_name != NULL) {
+		strlcpy(self->hw_name, hw_name, sizeof(self->hw_name));
+	} else {
+		self->hw_name[0] = '\0';
+	}
+
+	/* FIXME: should we get our own field? */
+	dev->atalk_ptr = self;
+
+	self->state = LAP_OFFLINE;
+
+	/* Initialize transmit queue */
+	skb_queue_head_init(&self->txq);
+	skb_queue_head_init(&self->txq_ultra);
+	skb_queue_head_init(&self->wx_list);
+
+	/* My unique IrLAP device address! */
+	/* We don't want the broadcast address, neither the NULL address
+	 * (most often used to signify "invalid"), and we don't want an
+	 * address already in use (otherwise connect won't be able
+	 * to select the proper link). - Jean II */
+	do {
+		get_random_bytes(&self->saddr, sizeof(self->saddr));
+	} while ((self->saddr == 0x0) || (self->saddr == BROADCAST) ||
+		 (hashbin_lock_find(irlap, self->saddr, NULL)) );
+	/* Copy to the driver */
+	memcpy(dev->dev_addr, &self->saddr, 4);
+
+	init_timer(&self->slot_timer);
+	init_timer(&self->query_timer);
+	init_timer(&self->discovery_timer);
+	init_timer(&self->final_timer);
+	init_timer(&self->poll_timer);
+	init_timer(&self->wd_timer);
+	init_timer(&self->backoff_timer);
+	init_timer(&self->media_busy_timer);
+
+	irlap_apply_default_connection_parameters(self);
+
+	self->N3 = 3; /* # connections attemts to try before giving up */
+
+	self->state = LAP_NDM;
+
+	hashbin_insert(irlap, (irda_queue_t *) self, self->saddr, NULL);
+
+	irlmp_register_link(self, self->saddr, &self->notify);
+
+	return self;
+}
+EXPORT_SYMBOL(irlap_open);
+
+/*
+ * Function __irlap_close (self)
+ *
+ *    Remove IrLAP and all allocated memory. Stop any pending timers.
+ *
+ */
+static void __irlap_close(struct irlap_cb *self)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Stop timers */
+	del_timer(&self->slot_timer);
+	del_timer(&self->query_timer);
+	del_timer(&self->discovery_timer);
+	del_timer(&self->final_timer);
+	del_timer(&self->poll_timer);
+	del_timer(&self->wd_timer);
+	del_timer(&self->backoff_timer);
+	del_timer(&self->media_busy_timer);
+
+	irlap_flush_all_queues(self);
+
+	self->magic = 0;
+
+	kfree(self);
+}
+
+/*
+ * Function irlap_close (self)
+ *
+ *    Remove IrLAP instance
+ *
+ */
+void irlap_close(struct irlap_cb *self)
+{
+	struct irlap_cb *lap;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* We used to send a LAP_DISC_INDICATION here, but this was
+	 * racy. This has been move within irlmp_unregister_link()
+	 * itself. Jean II */
+
+	/* Kill the LAP and all LSAPs on top of it */
+	irlmp_unregister_link(self->saddr);
+	self->notify.instance = NULL;
+
+	/* Be sure that we manage to remove ourself from the hash */
+	lap = hashbin_remove(irlap, self->saddr, NULL);
+	if (!lap) {
+		IRDA_DEBUG(1, "%s(), Didn't find myself!\n", __FUNCTION__);
+		return;
+	}
+	__irlap_close(lap);
+}
+EXPORT_SYMBOL(irlap_close);
+
+/*
+ * Function irlap_connect_indication (self, skb)
+ *
+ *    Another device is attempting to make a connection
+ *
+ */
+void irlap_connect_indication(struct irlap_cb *self, struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	irlap_init_qos_capabilities(self, NULL); /* No user QoS! */
+
+	irlmp_link_connect_indication(self->notify.instance, self->saddr,
+				      self->daddr, &self->qos_tx, skb);
+}
+
+/*
+ * Function irlap_connect_response (self, skb)
+ *
+ *    Service user has accepted incoming connection
+ *
+ */
+void irlap_connect_response(struct irlap_cb *self, struct sk_buff *userdata)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	irlap_do_event(self, CONNECT_RESPONSE, userdata, NULL);
+}
+
+/*
+ * Function irlap_connect_request (self, daddr, qos_user, sniff)
+ *
+ *    Request connection with another device, sniffing is not implemented
+ *    yet.
+ *
+ */
+void irlap_connect_request(struct irlap_cb *self, __u32 daddr,
+			   struct qos_info *qos_user, int sniff)
+{
+	IRDA_DEBUG(3, "%s(), daddr=0x%08x\n", __FUNCTION__, daddr);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	self->daddr = daddr;
+
+	/*
+	 *  If the service user specifies QoS values for this connection,
+	 *  then use them
+	 */
+	irlap_init_qos_capabilities(self, qos_user);
+
+	if ((self->state == LAP_NDM) && !self->media_busy)
+		irlap_do_event(self, CONNECT_REQUEST, NULL, NULL);
+	else
+		self->connect_pending = TRUE;
+}
+
+/*
+ * Function irlap_connect_confirm (self, skb)
+ *
+ *    Connection request has been accepted
+ *
+ */
+void irlap_connect_confirm(struct irlap_cb *self, struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	irlmp_link_connect_confirm(self->notify.instance, &self->qos_tx, skb);
+}
+
+/*
+ * Function irlap_data_indication (self, skb)
+ *
+ *    Received data frames from IR-port, so we just pass them up to
+ *    IrLMP for further processing
+ *
+ */
+void irlap_data_indication(struct irlap_cb *self, struct sk_buff *skb,
+			   int unreliable)
+{
+	/* Hide LAP header from IrLMP layer */
+	skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+	irlmp_link_data_indication(self->notify.instance, skb, unreliable);
+}
+
+
+/*
+ * Function irlap_data_request (self, skb)
+ *
+ *    Queue data for transmission, must wait until XMIT state
+ *
+ */
+void irlap_data_request(struct irlap_cb *self, struct sk_buff *skb,
+			int unreliable)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER),
+		    return;);
+	skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+	/*
+	 *  Must set frame format now so that the rest of the code knows
+	 *  if its dealing with an I or an UI frame
+	 */
+	if (unreliable)
+		skb->data[1] = UI_FRAME;
+	else
+		skb->data[1] = I_FRAME;
+
+	/* Don't forget to refcount it - see irlmp_connect_request(). */
+	skb_get(skb);
+
+	/* Add at the end of the queue (keep ordering) - Jean II */
+	skb_queue_tail(&self->txq, skb);
+
+	/*
+	 *  Send event if this frame only if we are in the right state
+	 *  FIXME: udata should be sent first! (skb_queue_head?)
+	 */
+	if ((self->state == LAP_XMIT_P) || (self->state == LAP_XMIT_S)) {
+		/* If we are not already processing the Tx queue, trigger
+		 * transmission immediately - Jean II */
+		if((skb_queue_len(&self->txq) <= 1) && (!self->local_busy))
+			irlap_do_event(self, DATA_REQUEST, skb, NULL);
+		/* Otherwise, the packets will be sent normally at the
+		 * next pf-poll - Jean II */
+	}
+}
+
+/*
+ * Function irlap_unitdata_request (self, skb)
+ *
+ *    Send Ultra data. This is data that must be sent outside any connection
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlap_unitdata_request(struct irlap_cb *self, struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER),
+	       return;);
+	skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+	skb->data[0] = CBROADCAST;
+	skb->data[1] = UI_FRAME;
+
+	/* Don't need to refcount, see irlmp_connless_data_request() */
+
+	skb_queue_tail(&self->txq_ultra, skb);
+
+	irlap_do_event(self, SEND_UI_FRAME, NULL, NULL);
+}
+#endif /*CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlap_udata_indication (self, skb)
+ *
+ *    Receive Ultra data. This is data that is received outside any connection
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlap_unitdata_indication(struct irlap_cb *self, struct sk_buff *skb)
+{
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/* Hide LAP header from IrLMP layer */
+	skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER);
+
+	irlmp_link_unitdata_indication(self->notify.instance, skb);
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlap_disconnect_request (void)
+ *
+ *    Request to disconnect connection by service user
+ */
+void irlap_disconnect_request(struct irlap_cb *self)
+{
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Don't disconnect until all data frames are successfully sent */
+	if (skb_queue_len(&self->txq) > 0) {
+		self->disconnect_pending = TRUE;
+
+		return;
+	}
+
+	/* Check if we are in the right state for disconnecting */
+	switch (self->state) {
+	case LAP_XMIT_P:        /* FALLTROUGH */
+	case LAP_XMIT_S:        /* FALLTROUGH */
+	case LAP_CONN:          /* FALLTROUGH */
+	case LAP_RESET_WAIT:    /* FALLTROUGH */
+	case LAP_RESET_CHECK:
+		irlap_do_event(self, DISCONNECT_REQUEST, NULL, NULL);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), disconnect pending!\n", __FUNCTION__);
+		self->disconnect_pending = TRUE;
+		break;
+	}
+}
+
+/*
+ * Function irlap_disconnect_indication (void)
+ *
+ *    Disconnect request from other device
+ *
+ */
+void irlap_disconnect_indication(struct irlap_cb *self, LAP_REASON reason)
+{
+	IRDA_DEBUG(1, "%s(), reason=%s\n", __FUNCTION__, lap_reasons[reason]);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Flush queues */
+	irlap_flush_all_queues(self);
+
+	switch (reason) {
+	case LAP_RESET_INDICATION:
+		IRDA_DEBUG(1, "%s(), Sending reset request!\n", __FUNCTION__);
+		irlap_do_event(self, RESET_REQUEST, NULL, NULL);
+		break;
+	case LAP_NO_RESPONSE:	   /* FALLTROUGH */
+	case LAP_DISC_INDICATION:  /* FALLTROUGH */
+	case LAP_FOUND_NONE:       /* FALLTROUGH */
+	case LAP_MEDIA_BUSY:
+		irlmp_link_disconnect_indication(self->notify.instance, self,
+						 reason, NULL);
+		break;
+	default:
+		IRDA_ERROR("%s: Unknown reason %d\n", __FUNCTION__, reason);
+	}
+}
+
+/*
+ * Function irlap_discovery_request (gen_addr_bit)
+ *
+ *    Start one single discovery operation.
+ *
+ */
+void irlap_discovery_request(struct irlap_cb *self, discovery_t *discovery)
+{
+	struct irlap_info info;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(discovery != NULL, return;);
+
+	IRDA_DEBUG(4, "%s(), nslots = %d\n", __FUNCTION__, discovery->nslots);
+
+	IRDA_ASSERT((discovery->nslots == 1) || (discovery->nslots == 6) ||
+		    (discovery->nslots == 8) || (discovery->nslots == 16),
+		    return;);
+
+	/* Discovery is only possible in NDM mode */
+	if (self->state != LAP_NDM) {
+		IRDA_DEBUG(4, "%s(), discovery only possible in NDM mode\n",
+			   __FUNCTION__);
+		irlap_discovery_confirm(self, NULL);
+		/* Note : in theory, if we are not in NDM, we could postpone
+		 * the discovery like we do for connection request.
+		 * In practice, it's not worth it. If the media was busy,
+		 * it's likely next time around it won't be busy. If we are
+		 * in REPLY state, we will get passive discovery info & event.
+		 * Jean II */
+		return;
+	}
+
+	/* Check if last discovery request finished in time, or if
+	 * it was aborted due to the media busy flag. */
+	if (self->discovery_log != NULL) {
+		hashbin_delete(self->discovery_log, (FREE_FUNC) kfree);
+		self->discovery_log = NULL;
+	}
+
+	/* All operations will occur at predictable time, no need to lock */
+	self->discovery_log = hashbin_new(HB_NOLOCK);
+
+	if (self->discovery_log == NULL) {
+		IRDA_WARNING("%s(), Unable to allocate discovery log!\n",
+			     __FUNCTION__);
+		return;
+	}
+
+	info.S = discovery->nslots; /* Number of slots */
+	info.s = 0; /* Current slot */
+
+	self->discovery_cmd = discovery;
+	info.discovery = discovery;
+
+	/* sysctl_slot_timeout bounds are checked in irsysctl.c - Jean II */
+	self->slot_timeout = sysctl_slot_timeout * HZ / 1000;
+
+	irlap_do_event(self, DISCOVERY_REQUEST, NULL, &info);
+}
+
+/*
+ * Function irlap_discovery_confirm (log)
+ *
+ *    A device has been discovered in front of this station, we
+ *    report directly to LMP.
+ */
+void irlap_discovery_confirm(struct irlap_cb *self, hashbin_t *discovery_log)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	IRDA_ASSERT(self->notify.instance != NULL, return;);
+
+	/*
+	 * Check for successful discovery, since we are then allowed to clear
+	 * the media busy condition (IrLAP 6.13.4 - p.94). This should allow
+	 * us to make connection attempts much faster and easier (i.e. no
+	 * collisions).
+	 * Setting media busy to false will also generate an event allowing
+	 * to process pending events in NDM state machine.
+	 * Note : the spec doesn't define what's a successful discovery is.
+	 * If we want Ultra to work, it's successful even if there is
+	 * nobody discovered - Jean II
+	 */
+	if (discovery_log)
+		irda_device_set_media_busy(self->netdev, FALSE);
+
+	/* Inform IrLMP */
+	irlmp_link_discovery_confirm(self->notify.instance, discovery_log);
+}
+
+/*
+ * Function irlap_discovery_indication (log)
+ *
+ *    Somebody is trying to discover us!
+ *
+ */
+void irlap_discovery_indication(struct irlap_cb *self, discovery_t *discovery)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(discovery != NULL, return;);
+
+	IRDA_ASSERT(self->notify.instance != NULL, return;);
+
+	/* A device is very likely to connect immediately after it performs
+	 * a successful discovery. This means that in our case, we are much
+	 * more likely to receive a connection request over the medium.
+	 * So, we backoff to avoid collisions.
+	 * IrLAP spec 6.13.4 suggest 100ms...
+	 * Note : this little trick actually make a *BIG* difference. If I set
+	 * my Linux box with discovery enabled and one Ultra frame sent every
+	 * second, my Palm has no trouble connecting to it every time !
+	 * Jean II */
+	irda_device_set_media_busy(self->netdev, SMALL);
+
+	irlmp_link_discovery_indication(self->notify.instance, discovery);
+}
+
+/*
+ * Function irlap_status_indication (quality_of_link)
+ */
+void irlap_status_indication(struct irlap_cb *self, int quality_of_link)
+{
+	switch (quality_of_link) {
+	case STATUS_NO_ACTIVITY:
+		IRDA_MESSAGE("IrLAP, no activity on link!\n");
+		break;
+	case STATUS_NOISY:
+		IRDA_MESSAGE("IrLAP, noisy link!\n");
+		break;
+	default:
+		break;
+	}
+	irlmp_status_indication(self->notify.instance,
+				quality_of_link, LOCK_NO_CHANGE);
+}
+
+/*
+ * Function irlap_reset_indication (void)
+ */
+void irlap_reset_indication(struct irlap_cb *self)
+{
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	if (self->state == LAP_RESET_WAIT)
+		irlap_do_event(self, RESET_REQUEST, NULL, NULL);
+	else
+		irlap_do_event(self, RESET_RESPONSE, NULL, NULL);
+}
+
+/*
+ * Function irlap_reset_confirm (void)
+ */
+void irlap_reset_confirm(void)
+{
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+}
+
+/*
+ * Function irlap_generate_rand_time_slot (S, s)
+ *
+ *    Generate a random time slot between s and S-1 where
+ *    S = Number of slots (0 -> S-1)
+ *    s = Current slot
+ */
+int irlap_generate_rand_time_slot(int S, int s)
+{
+	static int rand;
+	int slot;
+
+	IRDA_ASSERT((S - s) > 0, return 0;);
+
+	rand += jiffies;
+	rand ^= (rand << 12);
+	rand ^= (rand >> 20);
+
+	slot = s + rand % (S-s);
+
+	IRDA_ASSERT((slot >= s) || (slot < S), return 0;);
+
+	return slot;
+}
+
+/*
+ * Function irlap_update_nr_received (nr)
+ *
+ *    Remove all acknowledged frames in current window queue. This code is
+ *    not intuitive and you should not try to change it. If you think it
+ *    contains bugs, please mail a patch to the author instead.
+ */
+void irlap_update_nr_received(struct irlap_cb *self, int nr)
+{
+	struct sk_buff *skb = NULL;
+	int count = 0;
+
+	/*
+         * Remove all the ack-ed frames from the window queue.
+         */
+
+	/*
+	 *  Optimize for the common case. It is most likely that the receiver
+	 *  will acknowledge all the frames we have sent! So in that case we
+	 *  delete all frames stored in window.
+	 */
+	if (nr == self->vs) {
+		while ((skb = skb_dequeue(&self->wx_list)) != NULL) {
+			dev_kfree_skb(skb);
+		}
+		/* The last acked frame is the next to send minus one */
+		self->va = nr - 1;
+	} else {
+		/* Remove all acknowledged frames in current window */
+		while ((skb_peek(&self->wx_list) != NULL) &&
+		       (((self->va+1) % 8) != nr))
+		{
+			skb = skb_dequeue(&self->wx_list);
+			dev_kfree_skb(skb);
+
+			self->va = (self->va + 1) % 8;
+			count++;
+		}
+	}
+
+	/* Advance window */
+	self->window = self->window_size - skb_queue_len(&self->wx_list);
+}
+
+/*
+ * Function irlap_validate_ns_received (ns)
+ *
+ *    Validate the next to send (ns) field from received frame.
+ */
+int irlap_validate_ns_received(struct irlap_cb *self, int ns)
+{
+	/*  ns as expected?  */
+	if (ns == self->vr)
+		return NS_EXPECTED;
+	/*
+	 *  Stations are allowed to treat invalid NS as unexpected NS
+	 *  IrLAP, Recv ... with-invalid-Ns. p. 84
+	 */
+	return NS_UNEXPECTED;
+
+	/* return NR_INVALID; */
+}
+/*
+ * Function irlap_validate_nr_received (nr)
+ *
+ *    Validate the next to receive (nr) field from received frame.
+ *
+ */
+int irlap_validate_nr_received(struct irlap_cb *self, int nr)
+{
+	/*  nr as expected?  */
+	if (nr == self->vs) {
+		IRDA_DEBUG(4, "%s(), expected!\n", __FUNCTION__);
+		return NR_EXPECTED;
+	}
+
+	/*
+	 *  unexpected nr? (but within current window), first we check if the
+	 *  ns numbers of the frames in the current window wrap.
+	 */
+	if (self->va < self->vs) {
+		if ((nr >= self->va) && (nr <= self->vs))
+			return NR_UNEXPECTED;
+	} else {
+		if ((nr >= self->va) || (nr <= self->vs))
+			return NR_UNEXPECTED;
+	}
+
+	/* Invalid nr!  */
+	return NR_INVALID;
+}
+
+/*
+ * Function irlap_initiate_connection_state ()
+ *
+ *    Initialize the connection state parameters
+ *
+ */
+void irlap_initiate_connection_state(struct irlap_cb *self)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Next to send and next to receive */
+	self->vs = self->vr = 0;
+
+	/* Last frame which got acked (0 - 1) % 8 */
+	self->va = 7;
+
+	self->window = 1;
+
+	self->remote_busy = FALSE;
+	self->retry_count = 0;
+}
+
+/*
+ * Function irlap_wait_min_turn_around (self, qos)
+ *
+ *    Wait negotiated minimum turn around time, this function actually sets
+ *    the number of BOS's that must be sent before the next transmitted
+ *    frame in order to delay for the specified amount of time. This is
+ *    done to avoid using timers, and the forbidden udelay!
+ */
+void irlap_wait_min_turn_around(struct irlap_cb *self, struct qos_info *qos)
+{
+	__u32 min_turn_time;
+	__u32 speed;
+
+	/* Get QoS values.  */
+	speed = qos->baud_rate.value;
+	min_turn_time = qos->min_turn_time.value;
+
+	/* No need to calculate XBOFs for speeds over 115200 bps */
+	if (speed > 115200) {
+		self->mtt_required = min_turn_time;
+		return;
+	}
+
+	/*
+	 *  Send additional BOF's for the next frame for the requested
+	 *  min turn time, so now we must calculate how many chars (XBOF's) we
+	 *  must send for the requested time period (min turn time)
+	 */
+	self->xbofs_delay = irlap_min_turn_time_in_bytes(speed, min_turn_time);
+}
+
+/*
+ * Function irlap_flush_all_queues (void)
+ *
+ *    Flush all queues
+ *
+ */
+void irlap_flush_all_queues(struct irlap_cb *self)
+{
+	struct sk_buff* skb;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Free transmission queue */
+	while ((skb = skb_dequeue(&self->txq)) != NULL)
+		dev_kfree_skb(skb);
+
+	while ((skb = skb_dequeue(&self->txq_ultra)) != NULL)
+		dev_kfree_skb(skb);
+
+	/* Free sliding window buffered packets */
+	while ((skb = skb_dequeue(&self->wx_list)) != NULL)
+		dev_kfree_skb(skb);
+}
+
+/*
+ * Function irlap_setspeed (self, speed)
+ *
+ *    Change the speed of the IrDA port
+ *
+ */
+static void irlap_change_speed(struct irlap_cb *self, __u32 speed, int now)
+{
+	struct sk_buff *skb;
+
+	IRDA_DEBUG(0, "%s(), setting speed to %d\n", __FUNCTION__, speed);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	self->speed = speed;
+
+	/* Change speed now, or just piggyback speed on frames */
+	if (now) {
+		/* Send down empty frame to trigger speed change */
+		skb = dev_alloc_skb(0);
+		irlap_queue_xmit(self, skb);
+	}
+}
+
+/*
+ * Function irlap_init_qos_capabilities (self, qos)
+ *
+ *    Initialize QoS for this IrLAP session, What we do is to compute the
+ *    intersection of the QoS capabilities for the user, driver and for
+ *    IrLAP itself. Normally, IrLAP will not specify any values, but it can
+ *    be used to restrict certain values.
+ */
+static void irlap_init_qos_capabilities(struct irlap_cb *self,
+					struct qos_info *qos_user)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(self->netdev != NULL, return;);
+
+	/* Start out with the maximum QoS support possible */
+	irda_init_max_qos_capabilies(&self->qos_rx);
+
+	/* Apply drivers QoS capabilities */
+	irda_qos_compute_intersection(&self->qos_rx, self->qos_dev);
+
+	/*
+	 *  Check for user supplied QoS parameters. The service user is only
+	 *  allowed to supply these values. We check each parameter since the
+	 *  user may not have set all of them.
+	 */
+	if (qos_user) {
+		IRDA_DEBUG(1, "%s(), Found user specified QoS!\n", __FUNCTION__);
+
+		if (qos_user->baud_rate.bits)
+			self->qos_rx.baud_rate.bits &= qos_user->baud_rate.bits;
+
+		if (qos_user->max_turn_time.bits)
+			self->qos_rx.max_turn_time.bits &= qos_user->max_turn_time.bits;
+		if (qos_user->data_size.bits)
+			self->qos_rx.data_size.bits &= qos_user->data_size.bits;
+
+		if (qos_user->link_disc_time.bits)
+			self->qos_rx.link_disc_time.bits &= qos_user->link_disc_time.bits;
+	}
+
+	/* Use 500ms in IrLAP for now */
+	self->qos_rx.max_turn_time.bits &= 0x01;
+
+	/* Set data size */
+	/*self->qos_rx.data_size.bits &= 0x03;*/
+
+	irda_qos_bits_to_value(&self->qos_rx);
+}
+
+/*
+ * Function irlap_apply_default_connection_parameters (void, now)
+ *
+ *    Use the default connection and transmission parameters
+ */
+void irlap_apply_default_connection_parameters(struct irlap_cb *self)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* xbofs : Default value in NDM */
+	self->next_bofs   = 12;
+	self->bofs_count  = 12;
+
+	/* NDM Speed is 9600 */
+	irlap_change_speed(self, 9600, TRUE);
+
+	/* Set mbusy when going to NDM state */
+	irda_device_set_media_busy(self->netdev, TRUE);
+
+	/*
+	 * Generate random connection address for this session, which must
+	 * be 7 bits wide and different from 0x00 and 0xfe
+	 */
+	while ((self->caddr == 0x00) || (self->caddr == 0xfe)) {
+		get_random_bytes(&self->caddr, sizeof(self->caddr));
+		self->caddr &= 0xfe;
+	}
+
+	/* Use default values until connection has been negitiated */
+	self->slot_timeout = sysctl_slot_timeout;
+	self->final_timeout = FINAL_TIMEOUT;
+	self->poll_timeout = POLL_TIMEOUT;
+	self->wd_timeout = WD_TIMEOUT;
+
+	/* Set some default values */
+	self->qos_tx.baud_rate.value = 9600;
+	self->qos_rx.baud_rate.value = 9600;
+	self->qos_tx.max_turn_time.value = 0;
+	self->qos_rx.max_turn_time.value = 0;
+	self->qos_tx.min_turn_time.value = 0;
+	self->qos_rx.min_turn_time.value = 0;
+	self->qos_tx.data_size.value = 64;
+	self->qos_rx.data_size.value = 64;
+	self->qos_tx.window_size.value = 1;
+	self->qos_rx.window_size.value = 1;
+	self->qos_tx.additional_bofs.value = 12;
+	self->qos_rx.additional_bofs.value = 12;
+	self->qos_tx.link_disc_time.value = 0;
+	self->qos_rx.link_disc_time.value = 0;
+
+	irlap_flush_all_queues(self);
+
+	self->disconnect_pending = FALSE;
+	self->connect_pending = FALSE;
+}
+
+/*
+ * Function irlap_apply_connection_parameters (qos, now)
+ *
+ *    Initialize IrLAP with the negotiated QoS values
+ *
+ * If 'now' is false, the speed and xbofs will be changed after the next
+ * frame is sent.
+ * If 'now' is true, the speed and xbofs is changed immediately
+ */
+void irlap_apply_connection_parameters(struct irlap_cb *self, int now)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Set the negotiated xbofs value */
+	self->next_bofs   = self->qos_tx.additional_bofs.value;
+	if (now)
+		self->bofs_count = self->next_bofs;
+
+	/* Set the negotiated link speed (may need the new xbofs value) */
+	irlap_change_speed(self, self->qos_tx.baud_rate.value, now);
+
+	self->window_size = self->qos_tx.window_size.value;
+	self->window      = self->qos_tx.window_size.value;
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	/*
+	 *  Calculate how many bytes it is possible to transmit before the
+	 *  link must be turned around
+	 */
+	self->line_capacity =
+		irlap_max_line_capacity(self->qos_tx.baud_rate.value,
+					self->qos_tx.max_turn_time.value);
+	self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+
+	/*
+	 *  Initialize timeout values, some of the rules are listed on
+	 *  page 92 in IrLAP.
+	 */
+	IRDA_ASSERT(self->qos_tx.max_turn_time.value != 0, return;);
+	IRDA_ASSERT(self->qos_rx.max_turn_time.value != 0, return;);
+	/* The poll timeout applies only to the primary station.
+	 * It defines the maximum time the primary stay in XMIT mode
+	 * before timeout and turning the link around (sending a RR).
+	 * Or, this is how much we can keep the pf bit in primary mode.
+	 * Therefore, it must be lower or equal than our *OWN* max turn around.
+	 * Jean II */
+	self->poll_timeout = self->qos_tx.max_turn_time.value * HZ / 1000;
+	/* The Final timeout applies only to the primary station.
+	 * It defines the maximum time the primary wait (mostly in RECV mode)
+	 * for an answer from the secondary station before polling it again.
+	 * Therefore, it must be greater or equal than our *PARTNER*
+	 * max turn around time - Jean II */
+	self->final_timeout = self->qos_rx.max_turn_time.value * HZ / 1000;
+	/* The Watchdog Bit timeout applies only to the secondary station.
+	 * It defines the maximum time the secondary wait (mostly in RECV mode)
+	 * for poll from the primary station before getting annoyed.
+	 * Therefore, it must be greater or equal than our *PARTNER*
+	 * max turn around time - Jean II */
+	self->wd_timeout = self->final_timeout * 2;
+
+	/*
+	 * N1 and N2 are maximum retry count for *both* the final timer
+	 * and the wd timer (with a factor 2) as defined above.
+	 * After N1 retry of a timer, we give a warning to the user.
+	 * After N2 retry, we consider the link dead and disconnect it.
+	 * Jean II
+	 */
+
+	/*
+	 *  Set N1 to 0 if Link Disconnect/Threshold Time = 3 and set it to
+	 *  3 seconds otherwise. See page 71 in IrLAP for more details.
+	 *  Actually, it's not always 3 seconds, as we allow to set
+	 *  it via sysctl... Max maxtt is 500ms, and N1 need to be multiple
+	 *  of 2, so 1 second is minimum we can allow. - Jean II
+	 */
+	if (self->qos_tx.link_disc_time.value == sysctl_warn_noreply_time)
+		/*
+		 * If we set N1 to 0, it will trigger immediately, which is
+		 * not what we want. What we really want is to disable it,
+		 * Jean II
+		 */
+		self->N1 = -2; /* Disable - Need to be multiple of 2*/
+	else
+		self->N1 = sysctl_warn_noreply_time * 1000 /
+		  self->qos_rx.max_turn_time.value;
+
+	IRDA_DEBUG(4, "Setting N1 = %d\n", self->N1);
+
+	/* Set N2 to match our own disconnect time */
+	self->N2 = self->qos_tx.link_disc_time.value * 1000 /
+		self->qos_rx.max_turn_time.value;
+	IRDA_DEBUG(4, "Setting N2 = %d\n", self->N2);
+}
+
+#ifdef CONFIG_PROC_FS
+struct irlap_iter_state {
+	int id;
+};
+
+static void *irlap_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct irlap_iter_state *iter = seq->private;
+	struct irlap_cb *self;
+
+	/* Protect our access to the tsap list */
+	spin_lock_irq(&irlap->hb_spinlock);
+	iter->id = 0;
+
+	for (self = (struct irlap_cb *) hashbin_get_first(irlap); 
+	     self; self = (struct irlap_cb *) hashbin_get_next(irlap)) {
+		if (iter->id == *pos)
+			break;
+		++iter->id;
+	}
+		
+	return self;
+}
+
+static void *irlap_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct irlap_iter_state *iter = seq->private;
+
+	++*pos;
+	++iter->id;
+	return (void *) hashbin_get_next(irlap);
+}
+
+static void irlap_seq_stop(struct seq_file *seq, void *v)
+{
+	spin_unlock_irq(&irlap->hb_spinlock);
+}
+
+static int irlap_seq_show(struct seq_file *seq, void *v)
+{
+	const struct irlap_iter_state *iter = seq->private;
+	const struct irlap_cb *self = v;
+	
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -EINVAL;);
+
+	seq_printf(seq, "irlap%d ", iter->id);
+	seq_printf(seq, "state: %s\n",
+		   irlap_state[self->state]);
+
+	seq_printf(seq, "  device name: %s, ",
+		   (self->netdev) ? self->netdev->name : "bug");
+	seq_printf(seq, "hardware name: %s\n", self->hw_name);
+
+	seq_printf(seq, "  caddr: %#02x, ", self->caddr);
+	seq_printf(seq, "saddr: %#08x, ", self->saddr);
+	seq_printf(seq, "daddr: %#08x\n", self->daddr);
+
+	seq_printf(seq, "  win size: %d, ",
+		   self->window_size);
+	seq_printf(seq, "win: %d, ", self->window);
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	seq_printf(seq, "line capacity: %d, ",
+		   self->line_capacity);
+	seq_printf(seq, "bytes left: %d\n", self->bytes_left);
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+	seq_printf(seq, "  tx queue len: %d ",
+		   skb_queue_len(&self->txq));
+	seq_printf(seq, "win queue len: %d ",
+		   skb_queue_len(&self->wx_list));
+	seq_printf(seq, "rbusy: %s", self->remote_busy ?
+		   "TRUE" : "FALSE");
+	seq_printf(seq, " mbusy: %s\n", self->media_busy ?
+		   "TRUE" : "FALSE");
+
+	seq_printf(seq, "  retrans: %d ", self->retry_count);
+	seq_printf(seq, "vs: %d ", self->vs);
+	seq_printf(seq, "vr: %d ", self->vr);
+	seq_printf(seq, "va: %d\n", self->va);
+
+	seq_printf(seq, "  qos\tbps\tmaxtt\tdsize\twinsize\taddbofs\tmintt\tldisc\tcomp\n");
+
+	seq_printf(seq, "  tx\t%d\t",
+		   self->qos_tx.baud_rate.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_tx.max_turn_time.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_tx.data_size.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_tx.window_size.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_tx.additional_bofs.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_tx.min_turn_time.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_tx.link_disc_time.value);
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "  rx\t%d\t",
+		   self->qos_rx.baud_rate.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_rx.max_turn_time.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_rx.data_size.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_rx.window_size.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_rx.additional_bofs.value);
+	seq_printf(seq, "%d\t",
+		   self->qos_rx.min_turn_time.value);
+	seq_printf(seq, "%d\n",
+		   self->qos_rx.link_disc_time.value);
+
+	return 0;
+}
+
+static struct seq_operations irlap_seq_ops = {
+	.start  = irlap_seq_start,
+	.next   = irlap_seq_next,
+	.stop   = irlap_seq_stop,
+	.show   = irlap_seq_show,
+};
+
+static int irlap_seq_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *seq;
+	int rc = -ENOMEM;
+	struct irlap_iter_state *s = kmalloc(sizeof(*s), GFP_KERNEL);
+       
+	if (!s)
+		goto out;
+
+	if (irlap == NULL) {
+		rc = -EINVAL;
+		goto out_kfree;
+	}
+
+	rc = seq_open(file, &irlap_seq_ops);
+	if (rc)
+		goto out_kfree;
+
+	seq	     = file->private_data;
+	seq->private = s;
+	memset(s, 0, sizeof(*s));
+out:
+	return rc;
+out_kfree:
+	kfree(s);
+	goto out;
+}
+
+struct file_operations irlap_seq_fops = {
+	.owner		= THIS_MODULE,
+	.open           = irlap_seq_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release	= seq_release_private,
+};
+
+#endif /* CONFIG_PROC_FS */
diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
new file mode 100644
index 00000000000..1cd89f5f3b7
--- /dev/null
+++ b/net/irda/irlap_event.c
@@ -0,0 +1,2334 @@
+/*********************************************************************
+ *
+ * Filename:      irlap_event.c
+ * Version:       0.9
+ * Description:   IrLAP state machine implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dag@brattli.net>
+ * Created at:    Sat Aug 16 00:59:29 1997
+ * Modified at:   Sat Dec 25 21:07:57 1999
+ * Modified by:   Dag Brattli <dag@brattli.net>
+ *
+ *     Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>,
+ *     Copyright (c) 1998      Thomas Davis <ratbert@radiks.net>
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap_event.h>
+
+#include <net/irda/timer.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/qos.h>
+#include <net/irda/parameters.h>
+#include <net/irda/irlmp.h>		/* irlmp_flow_indication(), ... */
+
+#include <net/irda/irda_device.h>
+
+#ifdef CONFIG_IRDA_FAST_RR
+int sysctl_fast_poll_increase = 50;
+#endif
+
+static int irlap_state_ndm    (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_query  (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reply  (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_conn   (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_setup  (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_xmit_p (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_pclose (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_nrm_p  (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
+				  struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reset  (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_nrm_s  (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_xmit_s (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_sclose (struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info);
+static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event,
+				   struct sk_buff *, struct irlap_info *);
+
+#ifdef CONFIG_IRDA_DEBUG
+static const char *irlap_event[] = {
+	"DISCOVERY_REQUEST",
+	"CONNECT_REQUEST",
+	"CONNECT_RESPONSE",
+	"DISCONNECT_REQUEST",
+	"DATA_REQUEST",
+	"RESET_REQUEST",
+	"RESET_RESPONSE",
+	"SEND_I_CMD",
+	"SEND_UI_FRAME",
+	"RECV_DISCOVERY_XID_CMD",
+	"RECV_DISCOVERY_XID_RSP",
+	"RECV_SNRM_CMD",
+	"RECV_TEST_CMD",
+	"RECV_TEST_RSP",
+	"RECV_UA_RSP",
+	"RECV_DM_RSP",
+	"RECV_RD_RSP",
+	"RECV_I_CMD",
+	"RECV_I_RSP",
+	"RECV_UI_FRAME",
+	"RECV_FRMR_RSP",
+	"RECV_RR_CMD",
+	"RECV_RR_RSP",
+	"RECV_RNR_CMD",
+	"RECV_RNR_RSP",
+	"RECV_REJ_CMD",
+	"RECV_REJ_RSP",
+	"RECV_SREJ_CMD",
+	"RECV_SREJ_RSP",
+	"RECV_DISC_CMD",
+	"SLOT_TIMER_EXPIRED",
+	"QUERY_TIMER_EXPIRED",
+	"FINAL_TIMER_EXPIRED",
+	"POLL_TIMER_EXPIRED",
+	"DISCOVERY_TIMER_EXPIRED",
+	"WD_TIMER_EXPIRED",
+	"BACKOFF_TIMER_EXPIRED",
+	"MEDIA_BUSY_TIMER_EXPIRED",
+};
+#endif	/* CONFIG_IRDA_DEBUG */
+
+const char *irlap_state[] = {
+	"LAP_NDM",
+	"LAP_QUERY",
+	"LAP_REPLY",
+	"LAP_CONN",
+	"LAP_SETUP",
+	"LAP_OFFLINE",
+	"LAP_XMIT_P",
+	"LAP_PCLOSE",
+	"LAP_NRM_P",
+	"LAP_RESET_WAIT",
+	"LAP_RESET",
+	"LAP_NRM_S",
+	"LAP_XMIT_S",
+	"LAP_SCLOSE",
+	"LAP_RESET_CHECK",
+};
+
+static int (*state[])(struct irlap_cb *self, IRLAP_EVENT event,
+		      struct sk_buff *skb, struct irlap_info *info) =
+{
+	irlap_state_ndm,
+	irlap_state_query,
+	irlap_state_reply,
+	irlap_state_conn,
+	irlap_state_setup,
+	irlap_state_offline,
+	irlap_state_xmit_p,
+	irlap_state_pclose,
+	irlap_state_nrm_p,
+	irlap_state_reset_wait,
+	irlap_state_reset,
+	irlap_state_nrm_s,
+	irlap_state_xmit_s,
+	irlap_state_sclose,
+	irlap_state_reset_check,
+};
+
+/*
+ * Function irda_poll_timer_expired (data)
+ *
+ *    Poll timer has expired. Normally we must now send a RR frame to the
+ *    remote device
+ */
+static void irlap_poll_timer_expired(void *data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Calculate and set time before we will have to send back the pf bit
+ * to the peer. Use in primary.
+ * Make sure that state is XMIT_P/XMIT_S when calling this function
+ * (and that nobody messed up with the state). - Jean II
+ */
+static void irlap_start_poll_timer(struct irlap_cb *self, int timeout)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+#ifdef CONFIG_IRDA_FAST_RR
+	/*
+	 * Send out the RR frames faster if our own transmit queue is empty, or
+	 * if the peer is busy. The effect is a much faster conversation
+	 */
+	if ((skb_queue_len(&self->txq) == 0) || (self->remote_busy)) {
+		if (self->fast_RR == TRUE) {
+			/*
+			 *  Assert that the fast poll timer has not reached the
+			 *  normal poll timer yet
+			 */
+			if (self->fast_RR_timeout < timeout) {
+				/*
+				 *  FIXME: this should be a more configurable
+				 *         function
+				 */
+				self->fast_RR_timeout +=
+					(sysctl_fast_poll_increase * HZ/1000);
+
+				/* Use this fast(er) timeout instead */
+				timeout = self->fast_RR_timeout;
+			}
+		} else {
+			self->fast_RR = TRUE;
+
+			/* Start with just 0 ms */
+			self->fast_RR_timeout = 0;
+			timeout = 0;
+		}
+	} else
+		self->fast_RR = FALSE;
+
+	IRDA_DEBUG(3, "%s(), timeout=%d (%ld)\n", __FUNCTION__, timeout, jiffies);
+#endif /* CONFIG_IRDA_FAST_RR */
+
+	if (timeout == 0)
+		irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL);
+	else
+		irda_start_timer(&self->poll_timer, timeout, self,
+				 irlap_poll_timer_expired);
+}
+
+/*
+ * Function irlap_do_event (event, skb, info)
+ *
+ *    Rushes through the state machine without any delay. If state == XMIT
+ *    then send queued data frames.
+ */
+void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event,
+		    struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret;
+
+	if (!self || self->magic != LAP_MAGIC)
+		return;
+
+	IRDA_DEBUG(3, "%s(), event = %s, state = %s\n", __FUNCTION__,
+		   irlap_event[event], irlap_state[self->state]);
+
+	ret = (*state[self->state])(self, event, skb, info);
+
+	/*
+	 *  Check if there are any pending events that needs to be executed
+	 */
+	switch (self->state) {
+	case LAP_XMIT_P: /* FALLTHROUGH */
+	case LAP_XMIT_S:
+		/*
+		 * We just received the pf bit and are at the beginning
+		 * of a new LAP transmit window.
+		 * Check if there are any queued data frames, and do not
+		 * try to disconnect link if we send any data frames, since
+		 * that will change the state away form XMIT
+		 */
+		IRDA_DEBUG(2, "%s() : queue len = %d\n", __FUNCTION__,
+			   skb_queue_len(&self->txq));
+
+		if (skb_queue_len(&self->txq)) {
+			/* Prevent race conditions with irlap_data_request() */
+			self->local_busy = TRUE;
+
+			/* Theory of operation.
+			 * We send frames up to when we fill the window or
+			 * reach line capacity. Those frames will queue up
+			 * in the device queue, and the driver will slowly
+			 * send them.
+			 * After each frame that we send, we poll the higher
+			 * layer for more data. It's the right time to do
+			 * that because the link layer need to perform the mtt
+			 * and then send the first frame, so we can afford
+			 * to send a bit of time in kernel space.
+			 * The explicit flow indication allow to minimise
+			 * buffers (== lower latency), to avoid higher layer
+			 * polling via timers (== less context switches) and
+			 * to implement a crude scheduler - Jean II */
+
+			/* Try to send away all queued data frames */
+			while ((skb = skb_dequeue(&self->txq)) != NULL) {
+				/* Send one frame */
+				ret = (*state[self->state])(self, SEND_I_CMD,
+							    skb, NULL);
+				/* Drop reference count.
+				 * It will be increase as needed in
+				 * irlap_send_data_xxx() */
+				kfree_skb(skb);
+
+				/* Poll the higher layers for one more frame */
+				irlmp_flow_indication(self->notify.instance,
+						      FLOW_START);
+
+				if (ret == -EPROTO)
+					break; /* Try again later! */
+			}
+			/* Finished transmitting */
+			self->local_busy = FALSE;
+		} else if (self->disconnect_pending) {
+			self->disconnect_pending = FALSE;
+
+			ret = (*state[self->state])(self, DISCONNECT_REQUEST,
+						    NULL, NULL);
+		}
+		break;
+/*	case LAP_NDM: */
+/*	case LAP_CONN: */
+/*	case LAP_RESET_WAIT: */
+/*	case LAP_RESET_CHECK: */
+	default:
+		break;
+	}
+}
+
+/*
+ * Function irlap_next_state (self, state)
+ *
+ *    Switches state and provides debug information
+ *
+ */
+static inline void irlap_next_state(struct irlap_cb *self, IRLAP_STATE state)
+{
+	/*
+	if (!self || self->magic != LAP_MAGIC)
+		return;
+
+	IRDA_DEBUG(4, "next LAP state = %s\n", irlap_state[state]);
+	*/
+	self->state = state;
+}
+
+/*
+ * Function irlap_state_ndm (event, skb, frame)
+ *
+ *    NDM (Normal Disconnected Mode) state
+ *
+ */
+static int irlap_state_ndm(struct irlap_cb *self, IRLAP_EVENT event,
+			   struct sk_buff *skb, struct irlap_info *info)
+{
+	discovery_t *discovery_rsp;
+	int ret = 0;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case CONNECT_REQUEST:
+		IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+		if (self->media_busy) {
+			/* Note : this will never happen, because we test
+			 * media busy in irlap_connect_request() and
+			 * postpone the event... - Jean II */
+			IRDA_DEBUG(0, "%s(), CONNECT_REQUEST: media busy!\n",
+				   __FUNCTION__);
+
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+
+			irlap_disconnect_indication(self, LAP_MEDIA_BUSY);
+		} else {
+			irlap_send_snrm_frame(self, &self->qos_rx);
+
+			/* Start Final-bit timer */
+			irlap_start_final_timer(self, self->final_timeout);
+
+			self->retry_count = 0;
+			irlap_next_state(self, LAP_SETUP);
+		}
+		break;
+	case RECV_SNRM_CMD:
+		/* Check if the frame contains and I field */
+		if (info) {
+			self->daddr = info->daddr;
+			self->caddr = info->caddr;
+
+			irlap_next_state(self, LAP_CONN);
+
+			irlap_connect_indication(self, skb);
+		} else {
+			IRDA_DEBUG(0, "%s(), SNRM frame does not "
+				   "contain an I field!\n", __FUNCTION__);
+		}
+		break;
+	case DISCOVERY_REQUEST:
+		IRDA_ASSERT(info != NULL, return -1;);
+
+		if (self->media_busy) {
+			IRDA_DEBUG(1, "%s(), DISCOVERY_REQUEST: media busy!\n",
+				   __FUNCTION__);
+			/* irlap->log.condition = MEDIA_BUSY; */
+
+			/* This will make IrLMP try again */
+			irlap_discovery_confirm(self, NULL);
+			/* Note : the discovery log is not cleaned up here,
+			 * it will be done in irlap_discovery_request()
+			 * Jean II */
+			return 0;
+		}
+
+		self->S = info->S;
+		self->s = info->s;
+		irlap_send_discovery_xid_frame(self, info->S, info->s, TRUE,
+					       info->discovery);
+		self->frame_sent = FALSE;
+		self->s++;
+
+		irlap_start_slot_timer(self, self->slot_timeout);
+		irlap_next_state(self, LAP_QUERY);
+		break;
+	case RECV_DISCOVERY_XID_CMD:
+		IRDA_ASSERT(info != NULL, return -1;);
+
+		/* Assert that this is not the final slot */
+		if (info->s <= info->S) {
+			self->slot = irlap_generate_rand_time_slot(info->S,
+								   info->s);
+			if (self->slot == info->s) {
+				discovery_rsp = irlmp_get_discovery_response();
+				discovery_rsp->data.daddr = info->daddr;
+
+				irlap_send_discovery_xid_frame(self, info->S,
+							       self->slot,
+							       FALSE,
+							       discovery_rsp);
+				self->frame_sent = TRUE;
+			} else
+				self->frame_sent = FALSE;
+
+			/*
+			 * Go to reply state until end of discovery to
+			 * inhibit our own transmissions. Set the timer
+			 * to not stay forever there... Jean II
+			 */
+			irlap_start_query_timer(self, info->S, info->s);
+			irlap_next_state(self, LAP_REPLY);
+		} else {
+		/* This is the final slot. How is it possible ?
+		 * This would happen is both discoveries are just slightly
+		 * offset (if they are in sync, all packets are lost).
+		 * Most often, all the discovery requests will be received
+		 * in QUERY state (see my comment there), except for the
+		 * last frame that will come here.
+		 * The big trouble when it happen is that active discovery
+		 * doesn't happen, because nobody answer the discoveries
+		 * frame of the other guy, so the log shows up empty.
+		 * What should we do ?
+		 * Not much. It's too late to answer those discovery frames,
+		 * so we just pass the info to IrLMP who will put it in the
+		 * log (and post an event).
+		 * Another cause would be devices that do discovery much
+		 * slower than us, however the latest fixes should minimise
+		 * those cases...
+		 * Jean II
+		 */
+			IRDA_DEBUG(1, "%s(), Receiving final discovery request, missed the discovery slots :-(\n", __FUNCTION__);
+
+			/* Last discovery request -> in the log */
+			irlap_discovery_indication(self, info->discovery);
+		}
+		break;
+	case MEDIA_BUSY_TIMER_EXPIRED:
+		/* A bunch of events may be postponed because the media is
+		 * busy (usually immediately after we close a connection),
+		 * or while we are doing discovery (state query/reply).
+		 * In all those cases, the media busy flag will be cleared
+		 * when it's OK for us to process those postponed events.
+		 * This event is not mentioned in the state machines in the
+		 * IrLAP spec. It's because they didn't consider Ultra and
+		 * postponing connection request is optional.
+		 * Jean II */
+#ifdef CONFIG_IRDA_ULTRA
+		/* Send any pending Ultra frames if any */
+		if (!skb_queue_empty(&self->txq_ultra)) {
+			/* We don't send the frame, just post an event.
+			 * Also, previously this code was in timer.c...
+			 * Jean II */
+			ret = (*state[self->state])(self, SEND_UI_FRAME,
+						    NULL, NULL);
+		}
+#endif /* CONFIG_IRDA_ULTRA */
+		/* Check if we should try to connect.
+		 * This code was previously in irlap_do_event() */
+		if (self->connect_pending) {
+			self->connect_pending = FALSE;
+
+			/* This one *should* not pend in this state, except
+			 * if a socket try to connect and immediately
+			 * disconnect. - clear - Jean II */
+			if (self->disconnect_pending)
+				irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+			else
+				ret = (*state[self->state])(self,
+							    CONNECT_REQUEST,
+							    NULL, NULL);
+			self->disconnect_pending = FALSE;
+		}
+		/* Note : one way to test if this code works well (including
+		 * media busy and small busy) is to create a user space
+		 * application generating an Ultra packet every 3.05 sec (or
+		 * 2.95 sec) and to see how it interact with discovery.
+		 * It's fairly easy to check that no packet is lost, that the
+		 * packets are postponed during discovery and that after
+		 * discovery indication you have a 100ms "gap".
+		 * As connection request and Ultra are now processed the same
+		 * way, this avoid the tedious job of trying IrLAP connection
+		 * in all those cases...
+		 * Jean II */
+		break;
+#ifdef CONFIG_IRDA_ULTRA
+	case SEND_UI_FRAME:
+	{
+		int i;
+		/* Only allowed to repeat an operation twice */
+		for (i=0; ((i<2) && (self->media_busy == FALSE)); i++) {
+			skb = skb_dequeue(&self->txq_ultra);
+			if (skb)
+				irlap_send_ui_frame(self, skb, CBROADCAST,
+						    CMD_FRAME);
+			else
+				break;
+			/* irlap_send_ui_frame() won't increase skb reference
+			 * count, so no dev_kfree_skb() - Jean II */
+		}
+		if (i == 2) {
+			/* Force us to listen 500 ms again */
+			irda_device_set_media_busy(self->netdev, TRUE);
+		}
+		break;
+	}
+	case RECV_UI_FRAME:
+		/* Only accept broadcast frames in NDM mode */
+		if (info->caddr != CBROADCAST) {
+			IRDA_DEBUG(0, "%s(), not a broadcast frame!\n",
+				   __FUNCTION__);
+		} else
+			irlap_unitdata_indication(self, skb);
+		break;
+#endif /* CONFIG_IRDA_ULTRA */
+	case RECV_TEST_CMD:
+		/* Remove test frame header */
+		skb_pull(skb, sizeof(struct test_frame));
+
+		/*
+		 * Send response. This skb will not be sent out again, and
+		 * will only be used to send out the same info as the cmd
+		 */
+		irlap_send_test_frame(self, CBROADCAST, info->daddr, skb);
+		break;
+	case RECV_TEST_RSP:
+		IRDA_DEBUG(0, "%s() not implemented!\n", __FUNCTION__);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
+			   irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_query (event, skb, info)
+ *
+ *    QUERY state
+ *
+ */
+static int irlap_state_query(struct irlap_cb *self, IRLAP_EVENT event,
+			     struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case RECV_DISCOVERY_XID_RSP:
+		IRDA_ASSERT(info != NULL, return -1;);
+		IRDA_ASSERT(info->discovery != NULL, return -1;);
+
+		IRDA_DEBUG(4, "%s(), daddr=%08x\n", __FUNCTION__,
+			   info->discovery->data.daddr);
+
+		if (!self->discovery_log) {
+			IRDA_WARNING("%s: discovery log is gone! "
+				     "maybe the discovery timeout has been set"
+				     " to short?\n", __FUNCTION__);
+			break;
+		}
+		hashbin_insert(self->discovery_log,
+			       (irda_queue_t *) info->discovery,
+			       info->discovery->data.daddr, NULL);
+
+		/* Keep state */
+		/* irlap_next_state(self, LAP_QUERY);  */
+
+		break;
+	case RECV_DISCOVERY_XID_CMD:
+		/* Yes, it is possible to receive those frames in this mode.
+		 * Note that most often the last discovery request won't
+		 * occur here but in NDM state (see my comment there).
+		 * What should we do ?
+		 * Not much. We are currently performing our own discovery,
+		 * therefore we can't answer those frames. We don't want
+		 * to change state either. We just pass the info to
+		 * IrLMP who will put it in the log (and post an event).
+		 * Jean II
+		 */
+
+		IRDA_ASSERT(info != NULL, return -1;);
+
+		IRDA_DEBUG(1, "%s(), Receiving discovery request (s = %d) while performing discovery :-(\n", __FUNCTION__, info->s);
+
+		/* Last discovery request ? */
+		if (info->s == 0xff)
+			irlap_discovery_indication(self, info->discovery);
+		break;
+	case SLOT_TIMER_EXPIRED:
+		/*
+		 * Wait a little longer if we detect an incoming frame. This
+		 * is not mentioned in the spec, but is a good thing to do,
+		 * since we want to work even with devices that violate the
+		 * timing requirements.
+		 */
+		if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
+			IRDA_DEBUG(2, "%s(), device is slow to answer, "
+				   "waiting some more!\n", __FUNCTION__);
+			irlap_start_slot_timer(self, msecs_to_jiffies(10));
+			self->add_wait = TRUE;
+			return ret;
+		}
+		self->add_wait = FALSE;
+
+		if (self->s < self->S) {
+			irlap_send_discovery_xid_frame(self, self->S,
+						       self->s, TRUE,
+						       self->discovery_cmd);
+			self->s++;
+			irlap_start_slot_timer(self, self->slot_timeout);
+
+			/* Keep state */
+			irlap_next_state(self, LAP_QUERY);
+		} else {
+			/* This is the final slot! */
+			irlap_send_discovery_xid_frame(self, self->S, 0xff,
+						       TRUE,
+						       self->discovery_cmd);
+
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+
+			/*
+			 *  We are now finished with the discovery procedure,
+			 *  so now we must return the results
+			 */
+			irlap_discovery_confirm(self, self->discovery_log);
+
+			/* IrLMP should now have taken care of the log */
+			self->discovery_log = NULL;
+		}
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
+			   irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_reply (self, event, skb, info)
+ *
+ *    REPLY, we have received a XID discovery frame from a device and we
+ *    are waiting for the right time slot to send a response XID frame
+ *
+ */
+static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event,
+			     struct sk_buff *skb, struct irlap_info *info)
+{
+	discovery_t *discovery_rsp;
+	int ret=0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case QUERY_TIMER_EXPIRED:
+		IRDA_DEBUG(0, "%s(), QUERY_TIMER_EXPIRED <%ld>\n",
+			   __FUNCTION__, jiffies);
+		irlap_next_state(self, LAP_NDM);
+		break;
+	case RECV_DISCOVERY_XID_CMD:
+		IRDA_ASSERT(info != NULL, return -1;);
+		/* Last frame? */
+		if (info->s == 0xff) {
+			del_timer(&self->query_timer);
+
+			/* info->log.condition = REMOTE; */
+
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+
+			irlap_discovery_indication(self, info->discovery);
+		} else {
+			/* If it's our slot, send our reply */
+			if ((info->s >= self->slot) && (!self->frame_sent)) {
+				discovery_rsp = irlmp_get_discovery_response();
+				discovery_rsp->data.daddr = info->daddr;
+
+				irlap_send_discovery_xid_frame(self, info->S,
+							       self->slot,
+							       FALSE,
+							       discovery_rsp);
+
+				self->frame_sent = TRUE;
+			}
+			/* Readjust our timer to accomodate devices
+			 * doing faster or slower discovery than us...
+			 * Jean II */
+			irlap_start_query_timer(self, info->S, info->s);
+
+			/* Keep state */
+			//irlap_next_state(self, LAP_REPLY);
+		}
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __FUNCTION__,
+			   event, irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_conn (event, skb, info)
+ *
+ *    CONN, we have received a SNRM command and is waiting for the upper
+ *    layer to accept or refuse connection
+ *
+ */
+static int irlap_state_conn(struct irlap_cb *self, IRLAP_EVENT event,
+			    struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s(), event=%s\n", __FUNCTION__, irlap_event[ event]);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case CONNECT_RESPONSE:
+		skb_pull(skb, sizeof(struct snrm_frame));
+
+		IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+		irlap_qos_negotiate(self, skb);
+
+		irlap_initiate_connection_state(self);
+
+		/*
+		 * Applying the parameters now will make sure we change speed
+		 * *after* we have sent the next frame
+		 */
+		irlap_apply_connection_parameters(self, FALSE);
+
+		/*
+		 * Sending this frame will force a speed change after it has
+		 * been sent (i.e. the frame will be sent at 9600).
+		 */
+		irlap_send_ua_response_frame(self, &self->qos_rx);
+
+#if 0
+		/*
+		 * We are allowed to send two frames, but this may increase
+		 * the connect latency, so lets not do it for now.
+		 */
+		/* This is full of good intentions, but doesn't work in
+		 * practice.
+		 * After sending the first UA response, we switch the
+		 * dongle to the negotiated speed, which is usually
+		 * different than 9600 kb/s.
+		 * From there, there is two solutions :
+		 * 1) The other end has received the first UA response :
+		 * it will set up the connection, move to state LAP_NRM_P,
+		 * and will ignore and drop the second UA response.
+		 * Actually, it's even worse : the other side will almost
+		 * immediately send a RR that will likely collide with the
+		 * UA response (depending on negotiated turnaround).
+		 * 2) The other end has not received the first UA response,
+		 * will stay at 9600 and will never see the second UA response.
+		 * Jean II */
+		irlap_send_ua_response_frame(self, &self->qos_rx);
+#endif
+
+		/*
+		 *  The WD-timer could be set to the duration of the P-timer
+		 *  for this case, but it is recommended to use twice the
+		 *  value (note 3 IrLAP p. 60).
+		 */
+		irlap_start_wd_timer(self, self->wd_timeout);
+		irlap_next_state(self, LAP_NRM_S);
+
+		break;
+	case RECV_DISCOVERY_XID_CMD:
+		IRDA_DEBUG(3, "%s(), event RECV_DISCOVER_XID_CMD!\n",
+			   __FUNCTION__);
+		irlap_next_state(self, LAP_NDM);
+
+		break;
+	case DISCONNECT_REQUEST:
+		IRDA_DEBUG(0, "%s(), Disconnect request!\n", __FUNCTION__);
+		irlap_send_dm_frame(self);
+		irlap_next_state( self, LAP_NDM);
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __FUNCTION__, 
+			   event, irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Function irlap_state_setup (event, skb, frame)
+ *
+ *    SETUP state, The local layer has transmitted a SNRM command frame to
+ *    a remote peer layer and is awaiting a reply .
+ *
+ */
+static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event,
+			     struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case FINAL_TIMER_EXPIRED:
+		if (self->retry_count < self->N3) {
+/*
+ *  Perform random backoff, Wait a random number of time units, minimum
+ *  duration half the time taken to transmitt a SNRM frame, maximum duration
+ *  1.5 times the time taken to transmit a SNRM frame. So this time should
+ *  between 15 msecs and 45 msecs.
+ */
+			irlap_start_backoff_timer(self, msecs_to_jiffies(20 +
+						        (jiffies % 30)));
+		} else {
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+
+			irlap_disconnect_indication(self, LAP_FOUND_NONE);
+		}
+		break;
+	case BACKOFF_TIMER_EXPIRED:
+		irlap_send_snrm_frame(self, &self->qos_rx);
+		irlap_start_final_timer(self, self->final_timeout);
+		self->retry_count++;
+		break;
+	case RECV_SNRM_CMD:
+		IRDA_DEBUG(4, "%s(), SNRM battle!\n", __FUNCTION__);
+
+		IRDA_ASSERT(skb != NULL, return 0;);
+		IRDA_ASSERT(info != NULL, return 0;);
+
+		/*
+		 *  The device with the largest device address wins the battle
+		 *  (both have sent a SNRM command!)
+		 */
+		if (info &&(info->daddr > self->saddr)) {
+			del_timer(&self->final_timer);
+			irlap_initiate_connection_state(self);
+
+			IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+			skb_pull(skb, sizeof(struct snrm_frame));
+
+			irlap_qos_negotiate(self, skb);
+
+			/* Send UA frame and then change link settings */
+			irlap_apply_connection_parameters(self, FALSE);
+			irlap_send_ua_response_frame(self, &self->qos_rx);
+
+			irlap_next_state(self, LAP_NRM_S);
+			irlap_connect_confirm(self, skb);
+
+			/*
+			 *  The WD-timer could be set to the duration of the
+			 *  P-timer for this case, but it is recommended
+			 *  to use twice the value (note 3 IrLAP p. 60).
+			 */
+			irlap_start_wd_timer(self, self->wd_timeout);
+		} else {
+			/* We just ignore the other device! */
+			irlap_next_state(self, LAP_SETUP);
+		}
+		break;
+	case RECV_UA_RSP:
+		/* Stop F-timer */
+		del_timer(&self->final_timer);
+
+		/* Initiate connection state */
+		irlap_initiate_connection_state(self);
+
+		/* Negotiate connection parameters */
+		IRDA_ASSERT(skb->len > 10, return -1;);
+
+		skb_pull(skb, sizeof(struct ua_frame));
+
+		IRDA_ASSERT(self->netdev != NULL, return -1;);
+
+		irlap_qos_negotiate(self, skb);
+
+		/* Set the new link setting *now* (before the rr frame) */
+		irlap_apply_connection_parameters(self, TRUE);
+		self->retry_count = 0;
+
+		/* Wait for turnaround time to give a chance to the other
+		 * device to be ready to receive us.
+		 * Note : the time to switch speed is typically larger
+		 * than the turnaround time, but as we don't have the other
+		 * side speed switch time, that's our best guess...
+		 * Jean II */
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+
+		/* This frame will actually be sent at the new speed */
+		irlap_send_rr_frame(self, CMD_FRAME);
+
+		/* The timer is set to half the normal timer to quickly
+		 * detect a failure to negociate the new connection
+		 * parameters. IrLAP 6.11.3.2, note 3.
+		 * Note that currently we don't process this failure
+		 * properly, as we should do a quick disconnect.
+		 * Jean II */
+		irlap_start_final_timer(self, self->final_timeout/2);
+		irlap_next_state(self, LAP_NRM_P);
+
+		irlap_connect_confirm(self, skb);
+		break;
+	case RECV_DM_RSP:     /* FALLTHROUGH */
+	case RECV_DISC_CMD:
+		del_timer(&self->final_timer);
+		irlap_next_state(self, LAP_NDM);
+
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %d, %s\n", __FUNCTION__,
+			   event, irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_offline (self, event, skb, info)
+ *
+ *    OFFLINE state, not used for now!
+ *
+ */
+static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event,
+			       struct sk_buff *skb, struct irlap_info *info)
+{
+	IRDA_DEBUG( 0, "%s(), Unknown event\n", __FUNCTION__);
+
+	return -1;
+}
+
+/*
+ * Function irlap_state_xmit_p (self, event, skb, info)
+ *
+ *    XMIT, Only the primary station has right to transmit, and we
+ *    therefore do not expect to receive any transmissions from other
+ *    stations.
+ *
+ */
+static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event,
+			      struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	switch (event) {
+	case SEND_I_CMD:
+		/*
+		 *  Only send frame if send-window > 0.
+		 */
+		if ((self->window > 0) && (!self->remote_busy)) {
+			int nextfit;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+			struct sk_buff *skb_next;
+
+			/* With DYNAMIC_WINDOW, we keep the window size
+			 * maximum, and adapt on the packets we are sending.
+			 * At 115k, we can send only 2 packets of 2048 bytes
+			 * in a 500 ms turnaround. Without this option, we
+			 * would always limit the window to 2. With this
+			 * option, if we send smaller packets, we can send
+			 * up to 7 of them (always depending on QoS).
+			 * Jean II */
+
+			/* Look at the next skb. This is safe, as we are
+			 * the only consumer of the Tx queue (if we are not,
+			 * we have other problems) - Jean II */
+			skb_next = skb_peek(&self->txq);
+
+			/* Check if a subsequent skb exist and would fit in
+			 * the current window (with respect to turnaround
+			 * time).
+			 * This allow us to properly mark the current packet
+			 * with the pf bit, to avoid falling back on the
+			 * second test below, and avoid waiting the
+			 * end of the window and sending a extra RR.
+			 * Note : (skb_next != NULL) <=> (skb_queue_len() > 0)
+			 * Jean II */
+			nextfit = ((skb_next != NULL) &&
+				   ((skb_next->len + skb->len) <=
+				    self->bytes_left));
+
+			/*
+			 * The current packet may not fit ! Because of test
+			 * above, this should not happen any more !!!
+			 *  Test if we have transmitted more bytes over the
+			 *  link than its possible to do with the current
+			 *  speed and turn-around-time.
+			 */
+			if((!nextfit) && (skb->len > self->bytes_left)) {
+				IRDA_DEBUG(0, "%s(), Not allowed to transmit"
+					   " more bytes!\n", __FUNCTION__);
+				/* Requeue the skb */
+				skb_queue_head(&self->txq, skb_get(skb));
+				/*
+				 *  We should switch state to LAP_NRM_P, but
+				 *  that is not possible since we must be sure
+				 *  that we poll the other side. Since we have
+				 *  used up our time, the poll timer should
+				 *  trigger anyway now, so we just wait for it
+				 *  DB
+				 */
+				/*
+				 * Sorry, but that's not totally true. If
+				 * we send 2000B packets, we may wait another
+				 * 1000B until our turnaround expire. That's
+				 * why we need to be proactive in avoiding
+				 * coming here. - Jean II
+				 */
+				return -EPROTO;
+			}
+
+			/* Substract space used by this skb */
+			self->bytes_left -= skb->len;
+#else	/* CONFIG_IRDA_DYNAMIC_WINDOW */
+			/* Window has been adjusted for the max packet
+			 * size, so much simpler... - Jean II */
+			nextfit = (skb_queue_len(&self->txq) > 0);
+#endif	/* CONFIG_IRDA_DYNAMIC_WINDOW */
+			/*
+			 *  Send data with poll bit cleared only if window > 1
+			 *  and there is more frames after this one to be sent
+			 */
+			if ((self->window > 1) && (nextfit)) {
+				/* More packet to send in current window */
+				irlap_send_data_primary(self, skb);
+				irlap_next_state(self, LAP_XMIT_P);
+			} else {
+				/* Final packet of window */
+				irlap_send_data_primary_poll(self, skb);
+				irlap_next_state(self, LAP_NRM_P);
+
+				/*
+				 * Make sure state machine does not try to send
+				 * any more frames
+				 */
+				ret = -EPROTO;
+			}
+#ifdef CONFIG_IRDA_FAST_RR
+			/* Peer may want to reply immediately */
+			self->fast_RR = FALSE;
+#endif /* CONFIG_IRDA_FAST_RR */
+		} else {
+			IRDA_DEBUG(4, "%s(), Unable to send! remote busy?\n",
+				   __FUNCTION__);
+			skb_queue_head(&self->txq, skb_get(skb));
+
+			/*
+			 *  The next ret is important, because it tells
+			 *  irlap_next_state _not_ to deliver more frames
+			 */
+			ret = -EPROTO;
+		}
+		break;
+	case POLL_TIMER_EXPIRED:
+		IRDA_DEBUG(3, "%s(), POLL_TIMER_EXPIRED <%ld>\n",
+			    __FUNCTION__, jiffies);
+		irlap_send_rr_frame(self, CMD_FRAME);
+		/* Return to NRM properly - Jean II  */
+		self->window = self->window_size;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+		/* Allowed to transmit a maximum number of bytes again. */
+		self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+		irlap_start_final_timer(self, self->final_timeout);
+		irlap_next_state(self, LAP_NRM_P);
+		break;
+	case DISCONNECT_REQUEST:
+		del_timer(&self->poll_timer);
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+		irlap_send_disc_frame(self);
+		irlap_flush_all_queues(self);
+		irlap_start_final_timer(self, self->final_timeout);
+		self->retry_count = 0;
+		irlap_next_state(self, LAP_PCLOSE);
+		break;
+	case DATA_REQUEST:
+		/* Nothing to do, irlap_do_event() will send the packet
+		 * when we return... - Jean II */
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s\n",
+			   __FUNCTION__, irlap_event[event]);
+
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_pclose (event, skb, info)
+ *
+ *    PCLOSE state
+ */
+static int irlap_state_pclose(struct irlap_cb *self, IRLAP_EVENT event,
+			      struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case RECV_UA_RSP: /* FALLTHROUGH */
+	case RECV_DM_RSP:
+		del_timer(&self->final_timer);
+
+		/* Set new link parameters */
+		irlap_apply_default_connection_parameters(self);
+
+		/* Always switch state before calling upper layers */
+		irlap_next_state(self, LAP_NDM);
+
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	case FINAL_TIMER_EXPIRED:
+		if (self->retry_count < self->N3) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_disc_frame(self);
+			irlap_start_final_timer(self, self->final_timeout);
+			self->retry_count++;
+			/* Keep state */
+		} else {
+			irlap_apply_default_connection_parameters(self);
+
+			/*  Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+
+			irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+		}
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %d\n", __FUNCTION__, event);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_nrm_p (self, event, skb, info)
+ *
+ *   NRM_P (Normal Response Mode as Primary), The primary station has given
+ *   permissions to a secondary station to transmit IrLAP resonse frames
+ *   (by sending a frame with the P bit set). The primary station will not
+ *   transmit any frames and is expecting to receive frames only from the
+ *   secondary to which transmission permissions has been given.
+ */
+static int irlap_state_nrm_p(struct irlap_cb *self, IRLAP_EVENT event,
+			     struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+	int ns_status;
+	int nr_status;
+
+	switch (event) {
+	case RECV_I_RSP: /* Optimize for the common case */
+		/* FIXME: must check for remote_busy below */
+#ifdef CONFIG_IRDA_FAST_RR
+		/*
+		 *  Reset the fast_RR so we can use the fast RR code with
+		 *  full speed the next time since peer may have more frames
+		 *  to transmitt
+		 */
+		self->fast_RR = FALSE;
+#endif /* CONFIG_IRDA_FAST_RR */
+		IRDA_ASSERT( info != NULL, return -1;);
+
+		ns_status = irlap_validate_ns_received(self, info->ns);
+		nr_status = irlap_validate_nr_received(self, info->nr);
+
+		/*
+		 *  Check for expected I(nformation) frame
+		 */
+		if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
+
+			/* Update Vr (next frame for us to receive) */
+			self->vr = (self->vr + 1) % 8;
+
+			/* Update Nr received, cleanup our retry queue */
+			irlap_update_nr_received(self, info->nr);
+
+			/*
+			 *  Got expected NR, so reset the
+			 *  retry_count. This is not done by IrLAP spec,
+			 *  which is strange!
+			 */
+			self->retry_count = 0;
+			self->ack_required = TRUE;
+
+			/*  poll bit cleared?  */
+			if (!info->pf) {
+				/* Keep state, do not move this line */
+				irlap_next_state(self, LAP_NRM_P);
+
+				irlap_data_indication(self, skb, FALSE);
+			} else {
+				/* No longer waiting for pf */
+				del_timer(&self->final_timer);
+
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+
+				/* Call higher layer *before* changing state
+				 * to give them a chance to send data in the
+				 * next LAP frame.
+				 * Jean II */
+				irlap_data_indication(self, skb, FALSE);
+
+				/* XMIT states are the most dangerous state
+				 * to be in, because user requests are
+				 * processed directly and may change state.
+				 * On the other hand, in NDM_P, those
+				 * requests are queued and we will process
+				 * them when we return to irlap_do_event().
+				 * Jean II
+				 */
+				irlap_next_state(self, LAP_XMIT_P);
+
+				/* This is the last frame.
+				 * Make sure it's always called in XMIT state.
+				 * - Jean II */
+				irlap_start_poll_timer(self, self->poll_timeout);
+			}
+			break;
+
+		}
+		/* Unexpected next to send (Ns) */
+		if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
+		{
+			if (!info->pf) {
+				irlap_update_nr_received(self, info->nr);
+
+				/*
+				 *  Wait until the last frame before doing
+				 *  anything
+				 */
+
+				/* Keep state */
+				irlap_next_state(self, LAP_NRM_P);
+			} else {
+				IRDA_DEBUG(4,
+				       "%s(), missing or duplicate frame!\n",
+					   __FUNCTION__);
+
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+				irlap_send_rr_frame(self, CMD_FRAME);
+
+				self->ack_required = FALSE;
+
+				irlap_start_final_timer(self, self->final_timeout);
+				irlap_next_state(self, LAP_NRM_P);
+			}
+			break;
+		}
+		/*
+		 *  Unexpected next to receive (Nr)
+		 */
+		if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
+		{
+			if (info->pf) {
+				self->vr = (self->vr + 1) % 8;
+
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+
+				/* Resend rejected frames */
+				irlap_resend_rejected_frames(self, CMD_FRAME);
+
+				self->ack_required = FALSE;
+
+				/* Make sure we account for the time
+				 * to transmit our frames. See comemnts
+				 * in irlap_send_data_primary_poll().
+				 * Jean II */
+				irlap_start_final_timer(self, 2 * self->final_timeout);
+
+				/* Keep state, do not move this line */
+				irlap_next_state(self, LAP_NRM_P);
+
+				irlap_data_indication(self, skb, FALSE);
+			} else {
+				/*
+				 *  Do not resend frames until the last
+				 *  frame has arrived from the other
+				 *  device. This is not documented in
+				 *  IrLAP!!
+				 */
+				self->vr = (self->vr + 1) % 8;
+
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+
+				self->ack_required = FALSE;
+
+				/* Keep state, do not move this line!*/
+				irlap_next_state(self, LAP_NRM_P);
+
+				irlap_data_indication(self, skb, FALSE);
+			}
+			break;
+		}
+		/*
+		 *  Unexpected next to send (Ns) and next to receive (Nr)
+		 *  Not documented by IrLAP!
+		 */
+		if ((ns_status == NS_UNEXPECTED) &&
+		    (nr_status == NR_UNEXPECTED))
+		{
+			IRDA_DEBUG(4, "%s(), unexpected nr and ns!\n",
+				   __FUNCTION__);
+			if (info->pf) {
+				/* Resend rejected frames */
+				irlap_resend_rejected_frames(self, CMD_FRAME);
+
+				/* Give peer some time to retransmit! 
+				 * But account for our own Tx. */
+				irlap_start_final_timer(self, 2 * self->final_timeout);
+
+				/* Keep state, do not move this line */
+				irlap_next_state(self, LAP_NRM_P);
+			} else {
+				/* Update Nr received */
+				/* irlap_update_nr_received( info->nr); */
+
+				self->ack_required = FALSE;
+			}
+			break;
+		}
+
+		/*
+		 *  Invalid NR or NS
+		 */
+		if ((nr_status == NR_INVALID) || (ns_status == NS_INVALID)) {
+			if (info->pf) {
+				del_timer(&self->final_timer);
+
+				irlap_next_state(self, LAP_RESET_WAIT);
+
+				irlap_disconnect_indication(self, LAP_RESET_INDICATION);
+				self->xmitflag = TRUE;
+			} else {
+				del_timer(&self->final_timer);
+
+				irlap_disconnect_indication(self, LAP_RESET_INDICATION);
+
+				self->xmitflag = FALSE;
+			}
+			break;
+		}
+		IRDA_DEBUG(1, "%s(), Not implemented!\n", __FUNCTION__);
+		IRDA_DEBUG(1, "%s(), event=%s, ns_status=%d, nr_status=%d\n",
+		       __FUNCTION__, irlap_event[event], ns_status, nr_status);
+		break;
+	case RECV_UI_FRAME:
+		/* Poll bit cleared? */
+		if (!info->pf) {
+			irlap_data_indication(self, skb, TRUE);
+			irlap_next_state(self, LAP_NRM_P);
+		} else {
+			del_timer(&self->final_timer);
+			irlap_data_indication(self, skb, TRUE);
+			irlap_next_state(self, LAP_XMIT_P);
+			IRDA_DEBUG(1, "%s: RECV_UI_FRAME: next state %s\n", __FUNCTION__, irlap_state[self->state]);
+			irlap_start_poll_timer(self, self->poll_timeout);
+		}
+		break;
+	case RECV_RR_RSP:
+		/*
+		 *  If you get a RR, the remote isn't busy anymore,
+		 *  no matter what the NR
+		 */
+		self->remote_busy = FALSE;
+
+		/*
+		 *  Nr as expected?
+		 */
+		ret = irlap_validate_nr_received(self, info->nr);
+		if (ret == NR_EXPECTED) {
+			/* Stop final timer */
+			del_timer(&self->final_timer);
+
+			/* Update Nr received */
+			irlap_update_nr_received(self, info->nr);
+
+			/*
+			 *  Got expected NR, so reset the retry_count. This
+			 *  is not done by the IrLAP standard , which is
+			 *  strange! DB.
+			 */
+			self->retry_count = 0;
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+
+			irlap_next_state(self, LAP_XMIT_P);
+
+			/* Start poll timer */
+			irlap_start_poll_timer(self, self->poll_timeout);
+		} else if (ret == NR_UNEXPECTED) {
+			IRDA_ASSERT(info != NULL, return -1;);
+			/*
+			 *  Unexpected nr!
+			 */
+
+			/* Update Nr received */
+			irlap_update_nr_received(self, info->nr);
+
+			IRDA_DEBUG(4, "RECV_RR_FRAME: Retrans:%d, nr=%d, va=%d, "
+			      "vs=%d, vr=%d\n",
+			      self->retry_count, info->nr, self->va,
+			      self->vs, self->vr);
+
+			/* Resend rejected frames */
+			irlap_resend_rejected_frames(self, CMD_FRAME);
+
+			/* Final timer ??? Jean II */
+
+			irlap_next_state(self, LAP_NRM_P);
+		} else if (ret == NR_INVALID) {
+			IRDA_DEBUG(1, "%s(), Received RR with "
+				   "invalid nr !\n", __FUNCTION__);
+			del_timer(&self->final_timer);
+
+			irlap_next_state(self, LAP_RESET_WAIT);
+
+			irlap_disconnect_indication(self, LAP_RESET_INDICATION);
+			self->xmitflag = TRUE;
+		}
+		break;
+	case RECV_RNR_RSP:
+		IRDA_ASSERT(info != NULL, return -1;);
+
+		/* Stop final timer */
+		del_timer(&self->final_timer);
+		self->remote_busy = TRUE;
+
+		/* Update Nr received */
+		irlap_update_nr_received(self, info->nr);
+		irlap_next_state(self, LAP_XMIT_P);
+
+		/* Start poll timer */
+		irlap_start_poll_timer(self, self->poll_timeout);
+		break;
+	case RECV_FRMR_RSP:
+		del_timer(&self->final_timer);
+		self->xmitflag = TRUE;
+		irlap_next_state(self, LAP_RESET_WAIT);
+		irlap_reset_indication(self);
+		break;
+	case FINAL_TIMER_EXPIRED:
+		/*
+		 *  We are allowed to wait for additional 300 ms if
+		 *  final timer expires when we are in the middle
+		 *  of receiving a frame (page 45, IrLAP). Check that
+		 *  we only do this once for each frame.
+		 */
+		if (irda_device_is_receiving(self->netdev) && !self->add_wait) {
+			IRDA_DEBUG(1, "FINAL_TIMER_EXPIRED when receiving a "
+			      "frame! Waiting a little bit more!\n");
+			irlap_start_final_timer(self, msecs_to_jiffies(300));
+
+			/*
+			 *  Don't allow this to happen one more time in a row,
+			 *  or else we can get a pretty tight loop here if
+			 *  if we only receive half a frame. DB.
+			 */
+			self->add_wait = TRUE;
+			break;
+		}
+		self->add_wait = FALSE;
+
+		/* N2 is the disconnect timer. Until we reach it, we retry */
+		if (self->retry_count < self->N2) {
+			/* Retry sending the pf bit to the secondary */
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_rr_frame(self, CMD_FRAME);
+
+			irlap_start_final_timer(self, self->final_timeout);
+			self->retry_count++;
+			IRDA_DEBUG(4, "irlap_state_nrm_p: FINAL_TIMER_EXPIRED:"
+				   " retry_count=%d\n", self->retry_count);
+
+			/* Early warning event. I'm using a pretty liberal
+			 * interpretation of the spec and generate an event
+			 * every time the timer is multiple of N1 (and not
+			 * only the first time). This allow application
+			 * to know precisely if connectivity restart...
+			 * Jean II */
+			if((self->retry_count % self->N1) == 0)
+				irlap_status_indication(self,
+							STATUS_NO_ACTIVITY);
+
+			/* Keep state */
+		} else {
+			irlap_apply_default_connection_parameters(self);
+
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+			irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+		}
+		break;
+	case RECV_REJ_RSP:
+		irlap_update_nr_received(self, info->nr);
+		if (self->remote_busy) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_rr_frame(self, CMD_FRAME);
+		} else
+			irlap_resend_rejected_frames(self, CMD_FRAME);
+		irlap_start_final_timer(self, 2 * self->final_timeout);
+		break;
+	case RECV_SREJ_RSP:
+		irlap_update_nr_received(self, info->nr);
+		if (self->remote_busy) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_rr_frame(self, CMD_FRAME);
+		} else
+			irlap_resend_rejected_frame(self, CMD_FRAME);
+		irlap_start_final_timer(self, 2 * self->final_timeout);
+		break;
+	case RECV_RD_RSP:
+		IRDA_DEBUG(1, "%s(), RECV_RD_RSP\n", __FUNCTION__);
+
+		irlap_flush_all_queues(self);
+		irlap_next_state(self, LAP_XMIT_P);
+		/* Call back the LAP state machine to do a proper disconnect */
+		irlap_disconnect_request(self);
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %s\n",
+			    __FUNCTION__, irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_reset_wait (event, skb, info)
+ *
+ *    We have informed the service user of a reset condition, and is
+ *    awaiting reset of disconnect request.
+ *
+ */
+static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event,
+				  struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(3, "%s(), event = %s\n", __FUNCTION__, irlap_event[event]);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case RESET_REQUEST:
+		if (self->xmitflag) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_snrm_frame(self, NULL);
+			irlap_start_final_timer(self, self->final_timeout);
+			irlap_next_state(self, LAP_RESET);
+		} else {
+			irlap_start_final_timer(self, self->final_timeout);
+			irlap_next_state(self, LAP_RESET);
+		}
+		break;
+	case DISCONNECT_REQUEST:
+		irlap_wait_min_turn_around( self, &self->qos_tx);
+		irlap_send_disc_frame( self);
+		irlap_flush_all_queues( self);
+		irlap_start_final_timer( self, self->final_timeout);
+		self->retry_count = 0;
+		irlap_next_state( self, LAP_PCLOSE);
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
+			   irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_reset (self, event, skb, info)
+ *
+ *    We have sent a SNRM reset command to the peer layer, and is awaiting
+ *    reply.
+ *
+ */
+static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event,
+			     struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(3, "%s(), event = %s\n", __FUNCTION__, irlap_event[event]);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case RECV_DISC_CMD:
+		del_timer(&self->final_timer);
+
+		irlap_apply_default_connection_parameters(self);
+
+		/* Always switch state before calling upper layers */
+		irlap_next_state(self, LAP_NDM);
+
+		irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+
+		break;
+	case RECV_UA_RSP:
+		del_timer(&self->final_timer);
+
+		/* Initiate connection state */
+		irlap_initiate_connection_state(self);
+
+		irlap_reset_confirm();
+
+		self->remote_busy = FALSE;
+
+		irlap_next_state(self, LAP_XMIT_P);
+
+		irlap_start_poll_timer(self, self->poll_timeout);
+
+		break;
+	case FINAL_TIMER_EXPIRED:
+		if (self->retry_count < 3) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+
+			IRDA_ASSERT(self->netdev != NULL, return -1;);
+			irlap_send_snrm_frame(self, self->qos_dev);
+
+			self->retry_count++; /* Experimental!! */
+
+			irlap_start_final_timer(self, self->final_timeout);
+			irlap_next_state(self, LAP_RESET);
+		} else if (self->retry_count >= self->N3) {
+			irlap_apply_default_connection_parameters(self);
+
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+
+			irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+		}
+		break;
+	case RECV_SNRM_CMD:
+		/*
+		 * SNRM frame is not allowed to contain an I-field in this
+		 * state
+		 */
+		if (!info) {
+			IRDA_DEBUG(3, "%s(), RECV_SNRM_CMD\n", __FUNCTION__);
+			irlap_initiate_connection_state(self);
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_ua_response_frame(self, &self->qos_rx);
+			irlap_reset_confirm();
+			irlap_start_wd_timer(self, self->wd_timeout);
+			irlap_next_state(self, LAP_NDM);
+		} else {
+			IRDA_DEBUG(0,
+				   "%s(), SNRM frame contained an I field!\n",
+				   __FUNCTION__);
+		}
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %s\n",
+			   __FUNCTION__, irlap_event[event]);
+
+		ret = -1;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_xmit_s (event, skb, info)
+ *
+ *   XMIT_S, The secondary station has been given the right to transmit,
+ *   and we therefor do not expect to receive any transmissions from other
+ *   stations.
+ */
+static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event,
+			      struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s(), event=%s\n", __FUNCTION__, irlap_event[event]);
+
+	IRDA_ASSERT(self != NULL, return -ENODEV;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
+
+	switch (event) {
+	case SEND_I_CMD:
+		/*
+		 *  Send frame only if send window > 0
+		 */
+		if ((self->window > 0) && (!self->remote_busy)) {
+			int nextfit;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+			struct sk_buff *skb_next;
+
+			/*
+			 * Same deal as in irlap_state_xmit_p(), so see
+			 * the comments at that point.
+			 * We are the secondary, so there are only subtle
+			 * differences. - Jean II
+			 */
+
+			/* Check if a subsequent skb exist and would fit in
+			 * the current window (with respect to turnaround
+			 * time). - Jean II */
+			skb_next = skb_peek(&self->txq);
+			nextfit = ((skb_next != NULL) &&
+				   ((skb_next->len + skb->len) <=
+				    self->bytes_left));
+
+			/*
+			 *  Test if we have transmitted more bytes over the
+			 *  link than its possible to do with the current
+			 *  speed and turn-around-time.
+			 */
+			if((!nextfit) && (skb->len > self->bytes_left)) {
+				IRDA_DEBUG(0, "%s(), Not allowed to transmit"
+					   " more bytes!\n", __FUNCTION__);
+				/* Requeue the skb */
+				skb_queue_head(&self->txq, skb_get(skb));
+
+				/*
+				 *  Switch to NRM_S, this is only possible
+				 *  when we are in secondary mode, since we
+				 *  must be sure that we don't miss any RR
+				 *  frames
+				 */
+				self->window = self->window_size;
+				self->bytes_left = self->line_capacity;
+				irlap_start_wd_timer(self, self->wd_timeout);
+
+				irlap_next_state(self, LAP_NRM_S);
+				/* Slight difference with primary :
+				 * here we would wait for the other side to
+				 * expire the turnaround. - Jean II */
+
+				return -EPROTO; /* Try again later */
+			}
+			/* Substract space used by this skb */
+			self->bytes_left -= skb->len;
+#else	/* CONFIG_IRDA_DYNAMIC_WINDOW */
+			/* Window has been adjusted for the max packet
+			 * size, so much simpler... - Jean II */
+			nextfit = (skb_queue_len(&self->txq) > 0);
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+			/*
+			 *  Send data with final bit cleared only if window > 1
+			 *  and there is more frames to be sent
+			 */
+			if ((self->window > 1) && (nextfit)) {
+				irlap_send_data_secondary(self, skb);
+				irlap_next_state(self, LAP_XMIT_S);
+			} else {
+				irlap_send_data_secondary_final(self, skb);
+				irlap_next_state(self, LAP_NRM_S);
+
+				/*
+				 * Make sure state machine does not try to send
+				 * any more frames
+				 */
+				ret = -EPROTO;
+			}
+		} else {
+			IRDA_DEBUG(2, "%s(), Unable to send!\n", __FUNCTION__);
+			skb_queue_head(&self->txq, skb_get(skb));
+			ret = -EPROTO;
+		}
+		break;
+	case DISCONNECT_REQUEST:
+		irlap_send_rd_frame(self);
+		irlap_flush_all_queues(self);
+		irlap_start_wd_timer(self, self->wd_timeout);
+		irlap_next_state(self, LAP_SCLOSE);
+		break;
+	case DATA_REQUEST:
+		/* Nothing to do, irlap_do_event() will send the packet
+		 * when we return... - Jean II */
+		break;
+	default:
+		IRDA_DEBUG(2, "%s(), Unknown event %s\n", __FUNCTION__,
+			   irlap_event[event]);
+
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_nrm_s (event, skb, info)
+ *
+ *    NRM_S (Normal Response Mode as Secondary) state, in this state we are
+ *    expecting to receive frames from the primary station
+ *
+ */
+static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event,
+			     struct sk_buff *skb, struct irlap_info *info)
+{
+	int ns_status;
+	int nr_status;
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s(), event=%s\n", __FUNCTION__, irlap_event[ event]);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	switch (event) {
+	case RECV_I_CMD: /* Optimize for the common case */
+		/* FIXME: must check for remote_busy below */
+		IRDA_DEBUG(4, "%s(), event=%s nr=%d, vs=%d, ns=%d, "
+			   "vr=%d, pf=%d\n", __FUNCTION__,
+			   irlap_event[event], info->nr,
+			   self->vs, info->ns, self->vr, info->pf);
+
+		self->retry_count = 0;
+
+		ns_status = irlap_validate_ns_received(self, info->ns);
+		nr_status = irlap_validate_nr_received(self, info->nr);
+		/*
+		 *  Check for expected I(nformation) frame
+		 */
+		if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) {
+
+			/* Update Vr (next frame for us to receive) */
+			self->vr = (self->vr + 1) % 8;
+
+			/* Update Nr received */
+			irlap_update_nr_received(self, info->nr);
+
+			/*
+			 *  poll bit cleared?
+			 */
+			if (!info->pf) {
+
+				self->ack_required = TRUE;
+
+				/*
+				 *  Starting WD-timer here is optional, but
+				 *  not recommended. Note 6 IrLAP p. 83
+				 */
+#if 0
+				irda_start_timer(WD_TIMER, self->wd_timeout);
+#endif
+				/* Keep state, do not move this line */
+				irlap_next_state(self, LAP_NRM_S);
+
+				irlap_data_indication(self, skb, FALSE);
+				break;
+			} else {
+				/*
+				 *  We should wait before sending RR, and
+				 *  also before changing to XMIT_S
+				 *  state. (note 1, IrLAP p. 82)
+				 */
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+
+				/*
+				 * Give higher layers a chance to
+				 * immediately reply with some data before
+				 * we decide if we should send a RR frame
+				 * or not
+				 */
+				irlap_data_indication(self, skb, FALSE);
+
+				/* Any pending data requests?  */
+				if ((skb_queue_len(&self->txq) > 0) &&
+				    (self->window > 0))
+				{
+					self->ack_required = TRUE;
+
+					del_timer(&self->wd_timer);
+
+					irlap_next_state(self, LAP_XMIT_S);
+				} else {
+					irlap_send_rr_frame(self, RSP_FRAME);
+					irlap_start_wd_timer(self,
+							     self->wd_timeout);
+
+					/* Keep the state */
+					irlap_next_state(self, LAP_NRM_S);
+				}
+				break;
+			}
+		}
+		/*
+		 *  Check for Unexpected next to send (Ns)
+		 */
+		if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED))
+		{
+			/* Unexpected next to send, with final bit cleared */
+			if (!info->pf) {
+				irlap_update_nr_received(self, info->nr);
+
+				irlap_start_wd_timer(self, self->wd_timeout);
+			} else {
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+				irlap_send_rr_frame(self, RSP_FRAME);
+
+				irlap_start_wd_timer(self, self->wd_timeout);
+			}
+			break;
+		}
+
+		/*
+		 *  Unexpected Next to Receive(NR) ?
+		 */
+		if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED))
+		{
+			if (info->pf) {
+				IRDA_DEBUG(4, "RECV_I_RSP: frame(s) lost\n");
+
+				self->vr = (self->vr + 1) % 8;
+
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+
+				/* Resend rejected frames */
+				irlap_resend_rejected_frames(self, RSP_FRAME);
+
+				/* Keep state, do not move this line */
+				irlap_next_state(self, LAP_NRM_S);
+
+				irlap_data_indication(self, skb, FALSE);
+				irlap_start_wd_timer(self, self->wd_timeout);
+				break;
+			}
+			/*
+			 *  This is not documented in IrLAP!! Unexpected NR
+			 *  with poll bit cleared
+			 */
+			if (!info->pf) {
+				self->vr = (self->vr + 1) % 8;
+
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+
+				/* Keep state, do not move this line */
+				irlap_next_state(self, LAP_NRM_S);
+
+				irlap_data_indication(self, skb, FALSE);
+				irlap_start_wd_timer(self, self->wd_timeout);
+			}
+			break;
+		}
+
+		if (ret == NR_INVALID) {
+			IRDA_DEBUG(0, "NRM_S, NR_INVALID not implemented!\n");
+		}
+		if (ret == NS_INVALID) {
+			IRDA_DEBUG(0, "NRM_S, NS_INVALID not implemented!\n");
+		}
+		break;
+	case RECV_UI_FRAME:
+		/*
+		 *  poll bit cleared?
+		 */
+		if (!info->pf) {
+			irlap_data_indication(self, skb, TRUE);
+			irlap_next_state(self, LAP_NRM_S); /* Keep state */
+		} else {
+			/*
+			 *  Any pending data requests?
+			 */
+			if ((skb_queue_len(&self->txq) > 0) &&
+			    (self->window > 0) && !self->remote_busy)
+			{
+				irlap_data_indication(self, skb, TRUE);
+
+				del_timer(&self->wd_timer);
+
+				irlap_next_state(self, LAP_XMIT_S);
+			} else {
+				irlap_data_indication(self, skb, TRUE);
+
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+
+				irlap_send_rr_frame(self, RSP_FRAME);
+				self->ack_required = FALSE;
+
+				irlap_start_wd_timer(self, self->wd_timeout);
+
+				/* Keep the state */
+				irlap_next_state(self, LAP_NRM_S);
+			}
+		}
+		break;
+	case RECV_RR_CMD:
+		self->retry_count = 0;
+
+		/*
+		 *  Nr as expected?
+		 */
+		nr_status = irlap_validate_nr_received(self, info->nr);
+		if (nr_status == NR_EXPECTED) {
+			if ((skb_queue_len( &self->txq) > 0) &&
+			    (self->window > 0)) {
+				self->remote_busy = FALSE;
+
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+				del_timer(&self->wd_timer);
+
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+				irlap_next_state(self, LAP_XMIT_S);
+			} else {
+				self->remote_busy = FALSE;
+				/* Update Nr received */
+				irlap_update_nr_received(self, info->nr);
+				irlap_wait_min_turn_around(self, &self->qos_tx);
+				irlap_start_wd_timer(self, self->wd_timeout);
+
+				/* Note : if the link is idle (this case),
+				 * we never go in XMIT_S, so we never get a
+				 * chance to process any DISCONNECT_REQUEST.
+				 * Do it now ! - Jean II */
+				if (self->disconnect_pending) {
+					/* Disconnect */
+					irlap_send_rd_frame(self);
+					irlap_flush_all_queues(self);
+
+					irlap_next_state(self, LAP_SCLOSE);
+				} else {
+					/* Just send back pf bit */
+					irlap_send_rr_frame(self, RSP_FRAME);
+
+					irlap_next_state(self, LAP_NRM_S);
+				}
+			}
+		} else if (nr_status == NR_UNEXPECTED) {
+			self->remote_busy = FALSE;
+			irlap_update_nr_received(self, info->nr);
+			irlap_resend_rejected_frames(self, RSP_FRAME);
+
+			irlap_start_wd_timer(self, self->wd_timeout);
+
+			/* Keep state */
+			irlap_next_state(self, LAP_NRM_S);
+		} else {
+			IRDA_DEBUG(1, "%s(), invalid nr not implemented!\n",
+				   __FUNCTION__);
+		}
+		break;
+	case RECV_SNRM_CMD:
+		/* SNRM frame is not allowed to contain an I-field */
+		if (!info) {
+			del_timer(&self->wd_timer);
+			IRDA_DEBUG(1, "%s(), received SNRM cmd\n", __FUNCTION__);
+			irlap_next_state(self, LAP_RESET_CHECK);
+
+			irlap_reset_indication(self);
+		} else {
+			IRDA_DEBUG(0,
+				   "%s(), SNRM frame contained an I-field!\n",
+				   __FUNCTION__);
+
+		}
+		break;
+	case RECV_REJ_CMD:
+		irlap_update_nr_received(self, info->nr);
+		if (self->remote_busy) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_rr_frame(self, RSP_FRAME);
+		} else
+			irlap_resend_rejected_frames(self, RSP_FRAME);
+		irlap_start_wd_timer(self, self->wd_timeout);
+		break;
+	case RECV_SREJ_CMD:
+		irlap_update_nr_received(self, info->nr);
+		if (self->remote_busy) {
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_rr_frame(self, RSP_FRAME);
+		} else
+			irlap_resend_rejected_frame(self, RSP_FRAME);
+		irlap_start_wd_timer(self, self->wd_timeout);
+		break;
+	case WD_TIMER_EXPIRED:
+		/*
+		 *  Wait until retry_count * n matches negotiated threshold/
+		 *  disconnect time (note 2 in IrLAP p. 82)
+		 *
+		 * Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED
+		 * Note : self->wd_timeout = (self->final_timeout * 2),
+		 *   which explain why we use (self->N2 / 2) here !!!
+		 * Jean II
+		 */
+		IRDA_DEBUG(1, "%s(), retry_count = %d\n", __FUNCTION__,
+			   self->retry_count);
+
+		if (self->retry_count < (self->N2 / 2)) {
+			/* No retry, just wait for primary */
+			irlap_start_wd_timer(self, self->wd_timeout);
+			self->retry_count++;
+
+			if((self->retry_count % (self->N1 / 2)) == 0)
+				irlap_status_indication(self,
+							STATUS_NO_ACTIVITY);
+		} else {
+			irlap_apply_default_connection_parameters(self);
+
+			/* Always switch state before calling upper layers */
+			irlap_next_state(self, LAP_NDM);
+			irlap_disconnect_indication(self, LAP_NO_RESPONSE);
+		}
+		break;
+	case RECV_DISC_CMD:
+		/* Always switch state before calling upper layers */
+		irlap_next_state(self, LAP_NDM);
+
+		/* Send disconnect response */
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+		irlap_send_ua_response_frame(self, NULL);
+
+		del_timer(&self->wd_timer);
+		irlap_flush_all_queues(self);
+		/* Set default link parameters */
+		irlap_apply_default_connection_parameters(self);
+
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	case RECV_DISCOVERY_XID_CMD:
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+		irlap_send_rr_frame(self, RSP_FRAME);
+		self->ack_required = TRUE;
+		irlap_start_wd_timer(self, self->wd_timeout);
+		irlap_next_state(self, LAP_NRM_S);
+
+		break;
+	case RECV_TEST_CMD:
+		/* Remove test frame header (only LAP header in NRM) */
+		skb_pull(skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER);
+
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+		irlap_start_wd_timer(self, self->wd_timeout);
+
+		/* Send response (info will be copied) */
+		irlap_send_test_frame(self, self->caddr, info->daddr, skb);
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __FUNCTION__,
+			   event, irlap_event[event]);
+
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlap_state_sclose (self, event, skb, info)
+ */
+static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event,
+			      struct sk_buff *skb, struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -ENODEV;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
+
+	switch (event) {
+	case RECV_DISC_CMD:
+		/* Always switch state before calling upper layers */
+		irlap_next_state(self, LAP_NDM);
+
+		/* Send disconnect response */
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+		irlap_send_ua_response_frame(self, NULL);
+
+		del_timer(&self->wd_timer);
+		/* Set default link parameters */
+		irlap_apply_default_connection_parameters(self);
+
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	case RECV_DM_RSP:
+		/* IrLAP-1.1 p.82: in SCLOSE, S and I type RSP frames
+		 * shall take us down into default NDM state, like DM_RSP
+		 */
+	case RECV_RR_RSP:
+	case RECV_RNR_RSP:
+	case RECV_REJ_RSP:
+	case RECV_SREJ_RSP:
+	case RECV_I_RSP:
+		/* Always switch state before calling upper layers */
+		irlap_next_state(self, LAP_NDM);
+
+		del_timer(&self->wd_timer);
+		irlap_apply_default_connection_parameters(self);
+
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	case WD_TIMER_EXPIRED:
+		/* Always switch state before calling upper layers */
+		irlap_next_state(self, LAP_NDM);
+
+		irlap_apply_default_connection_parameters(self);
+
+		irlap_disconnect_indication(self, LAP_DISC_INDICATION);
+		break;
+	default:
+		/* IrLAP-1.1 p.82: in SCLOSE, basically any received frame
+		 * with pf=1 shall restart the wd-timer and resend the rd:rsp
+		 */
+		if (info != NULL  &&  info->pf) {
+			del_timer(&self->wd_timer);
+			irlap_wait_min_turn_around(self, &self->qos_tx);
+			irlap_send_rd_frame(self);
+			irlap_start_wd_timer(self, self->wd_timeout);
+			break;		/* stay in SCLOSE */
+		}
+
+		IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __FUNCTION__,
+			   event, irlap_event[event]);
+
+		ret = -EINVAL;
+		break;
+	}
+
+	return -1;
+}
+
+static int irlap_state_reset_check( struct irlap_cb *self, IRLAP_EVENT event,
+				   struct sk_buff *skb,
+				   struct irlap_info *info)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(1, "%s(), event=%s\n", __FUNCTION__, irlap_event[event]);
+
+	IRDA_ASSERT(self != NULL, return -ENODEV;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;);
+
+	switch (event) {
+	case RESET_RESPONSE:
+		irlap_send_ua_response_frame(self, &self->qos_rx);
+		irlap_initiate_connection_state(self);
+		irlap_start_wd_timer(self, WD_TIMEOUT);
+		irlap_flush_all_queues(self);
+
+		irlap_next_state(self, LAP_NRM_S);
+		break;
+	case DISCONNECT_REQUEST:
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+		irlap_send_rd_frame(self);
+		irlap_start_wd_timer(self, WD_TIMEOUT);
+		irlap_next_state(self, LAP_SCLOSE);
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %d, (%s)\n", __FUNCTION__,
+			   event, irlap_event[event]);
+
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
diff --git a/net/irda/irlap_frame.c b/net/irda/irlap_frame.c
new file mode 100644
index 00000000000..040abe714aa
--- /dev/null
+++ b/net/irda/irlap_frame.c
@@ -0,0 +1,1437 @@
+/*********************************************************************
+ *
+ * Filename:      irlap_frame.c
+ * Version:       1.0
+ * Description:   Build and transmit IrLAP frames
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Aug 19 10:27:26 1997
+ * Modified at:   Wed Jan  5 08:59:04 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/irda.h>
+
+#include <net/pkt_sched.h>
+#include <net/sock.h>
+
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/irlap.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/timer.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/qos.h>
+
+static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb,
+			       int command);
+
+/*
+ * Function irlap_insert_info (self, skb)
+ *
+ *    Insert minimum turnaround time and speed information into the skb. We
+ *    need to do this since it's per packet relevant information. Safe to
+ *    have this function inlined since it's only called from one place
+ */
+static inline void irlap_insert_info(struct irlap_cb *self,
+				     struct sk_buff *skb)
+{
+	struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
+
+	/*
+	 * Insert MTT (min. turn time) and speed into skb, so that the
+	 * device driver knows which settings to use
+	 */
+	cb->magic = LAP_MAGIC;
+	cb->mtt = self->mtt_required;
+	cb->next_speed = self->speed;
+
+	/* Reset */
+	self->mtt_required = 0;
+
+	/*
+	 * Delay equals negotiated BOFs count, plus the number of BOFs to
+	 * force the negotiated minimum turnaround time
+	 */
+	cb->xbofs = self->bofs_count;
+	cb->next_xbofs = self->next_bofs;
+	cb->xbofs_delay = self->xbofs_delay;
+
+	/* Reset XBOF's delay (used only for getting min turn time) */
+	self->xbofs_delay = 0;
+	/* Put the correct xbofs value for the next packet */
+	self->bofs_count = self->next_bofs;
+}
+
+/*
+ * Function irlap_queue_xmit (self, skb)
+ *
+ *    A little wrapper for dev_queue_xmit, so we can insert some common
+ *    code into it.
+ */
+void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb)
+{
+	/* Some common init stuff */
+	skb->dev = self->netdev;
+	skb->h.raw = skb->nh.raw = skb->mac.raw = skb->data;
+	skb->protocol = htons(ETH_P_IRDA);
+	skb->priority = TC_PRIO_BESTEFFORT;
+
+	irlap_insert_info(self, skb);
+
+	dev_queue_xmit(skb);
+}
+
+/*
+ * Function irlap_send_snrm_cmd (void)
+ *
+ *    Transmits a connect SNRM command frame
+ */
+void irlap_send_snrm_frame(struct irlap_cb *self, struct qos_info *qos)
+{
+	struct sk_buff *tx_skb;
+	struct snrm_frame *frame;
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Allocate frame */
+	tx_skb = dev_alloc_skb(64);
+	if (!tx_skb)
+		return;
+
+	frame = (struct snrm_frame *) skb_put(tx_skb, 2);
+
+	/* Insert connection address field */
+	if (qos)
+		frame->caddr = CMD_FRAME | CBROADCAST;
+	else
+		frame->caddr = CMD_FRAME | self->caddr;
+
+	/* Insert control field */
+	frame->control = SNRM_CMD | PF_BIT;
+
+	/*
+	 *  If we are establishing a connection then insert QoS paramerters
+	 */
+	if (qos) {
+		skb_put(tx_skb, 9); /* 21 left */
+		frame->saddr = cpu_to_le32(self->saddr);
+		frame->daddr = cpu_to_le32(self->daddr);
+
+		frame->ncaddr = self->caddr;
+
+		ret = irlap_insert_qos_negotiation_params(self, tx_skb);
+		if (ret < 0) {
+			dev_kfree_skb(tx_skb);
+			return;
+		}
+	}
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_snrm_cmd (skb, info)
+ *
+ *    Received SNRM (Set Normal Response Mode) command frame
+ *
+ */
+static void irlap_recv_snrm_cmd(struct irlap_cb *self, struct sk_buff *skb,
+				struct irlap_info *info)
+{
+	struct snrm_frame *frame;
+
+	if (pskb_may_pull(skb,sizeof(struct snrm_frame))) {
+		frame = (struct snrm_frame *) skb->data;
+
+		/* Copy the new connection address ignoring the C/R bit */
+		info->caddr = frame->ncaddr & 0xFE;
+
+		/* Check if the new connection address is valid */
+		if ((info->caddr == 0x00) || (info->caddr == 0xfe)) {
+			IRDA_DEBUG(3, "%s(), invalid connection address!\n",
+				   __FUNCTION__);
+			return;
+		}
+
+		/* Copy peer device address */
+		info->daddr = le32_to_cpu(frame->saddr);
+		info->saddr = le32_to_cpu(frame->daddr);
+
+		/* Only accept if addressed directly to us */
+		if (info->saddr != self->saddr) {
+			IRDA_DEBUG(2, "%s(), not addressed to us!\n",
+				   __FUNCTION__);
+			return;
+		}
+		irlap_do_event(self, RECV_SNRM_CMD, skb, info);
+	} else {
+		/* Signal that this SNRM frame does not contain and I-field */
+		irlap_do_event(self, RECV_SNRM_CMD, skb, NULL);
+	}
+}
+
+/*
+ * Function irlap_send_ua_response_frame (qos)
+ *
+ *    Send UA (Unnumbered Acknowledgement) frame
+ *
+ */
+void irlap_send_ua_response_frame(struct irlap_cb *self, struct qos_info *qos)
+{
+	struct sk_buff *tx_skb;
+	struct ua_frame *frame;
+	int ret;
+
+	IRDA_DEBUG(2, "%s() <%ld>\n", __FUNCTION__, jiffies);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Allocate frame */
+	tx_skb = dev_alloc_skb(64);
+	if (!tx_skb)
+		return;
+
+	frame = (struct ua_frame *) skb_put(tx_skb, 10);
+
+	/* Build UA response */
+	frame->caddr = self->caddr;
+	frame->control = UA_RSP | PF_BIT;
+
+	frame->saddr = cpu_to_le32(self->saddr);
+	frame->daddr = cpu_to_le32(self->daddr);
+
+	/* Should we send QoS negotiation parameters? */
+	if (qos) {
+		ret = irlap_insert_qos_negotiation_params(self, tx_skb);
+		if (ret < 0) {
+			dev_kfree_skb(tx_skb);
+			return;
+		}
+	}
+
+	irlap_queue_xmit(self, tx_skb);
+}
+
+
+/*
+ * Function irlap_send_dm_frame (void)
+ *
+ *    Send disconnected mode (DM) frame
+ *
+ */
+void irlap_send_dm_frame( struct irlap_cb *self)
+{
+	struct sk_buff *tx_skb = NULL;
+	__u8 *frame;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	tx_skb = dev_alloc_skb(32);
+	if (!tx_skb)
+		return;
+
+	frame = skb_put(tx_skb, 2);
+
+	if (self->state == LAP_NDM)
+		frame[0] = CBROADCAST;
+	else
+		frame[0] = self->caddr;
+
+	frame[1] = DM_RSP | PF_BIT;
+
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_send_disc_frame (void)
+ *
+ *    Send disconnect (DISC) frame
+ *
+ */
+void irlap_send_disc_frame(struct irlap_cb *self)
+{
+	struct sk_buff *tx_skb = NULL;
+	__u8 *frame;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	tx_skb = dev_alloc_skb(16);
+	if (!tx_skb)
+		return;
+
+	frame = skb_put(tx_skb, 2);
+
+	frame[0] = self->caddr | CMD_FRAME;
+	frame[1] = DISC_CMD | PF_BIT;
+
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_send_discovery_xid_frame (S, s, command)
+ *
+ *    Build and transmit a XID (eXchange station IDentifier) discovery
+ *    frame.
+ */
+void irlap_send_discovery_xid_frame(struct irlap_cb *self, int S, __u8 s,
+				    __u8 command, discovery_t *discovery)
+{
+	struct sk_buff *tx_skb = NULL;
+	struct xid_frame *frame;
+	__u32 bcast = BROADCAST;
+	__u8 *info;
+
+	IRDA_DEBUG(4, "%s(), s=%d, S=%d, command=%d\n", __FUNCTION__,
+		   s, S, command);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(discovery != NULL, return;);
+
+	tx_skb = dev_alloc_skb(64);
+	if (!tx_skb)
+		return;
+
+	skb_put(tx_skb, 14);
+	frame = (struct xid_frame *) tx_skb->data;
+
+	if (command) {
+		frame->caddr = CBROADCAST | CMD_FRAME;
+		frame->control =  XID_CMD | PF_BIT;
+	} else {
+		frame->caddr = CBROADCAST;
+		frame->control =  XID_RSP | PF_BIT;
+	}
+	frame->ident = XID_FORMAT;
+
+	frame->saddr = cpu_to_le32(self->saddr);
+
+	if (command)
+		frame->daddr = cpu_to_le32(bcast);
+	else
+		frame->daddr = cpu_to_le32(discovery->data.daddr);
+
+	switch (S) {
+	case 1:
+		frame->flags = 0x00;
+		break;
+	case 6:
+		frame->flags = 0x01;
+		break;
+	case 8:
+		frame->flags = 0x02;
+		break;
+	case 16:
+		frame->flags = 0x03;
+		break;
+	default:
+		frame->flags = 0x02;
+		break;
+	}
+
+	frame->slotnr = s;
+	frame->version = 0x00;
+
+	/*
+	 *  Provide info for final slot only in commands, and for all
+	 *  responses. Send the second byte of the hint only if the
+	 *  EXTENSION bit is set in the first byte.
+	 */
+	if (!command || (frame->slotnr == 0xff)) {
+		int len;
+
+		if (discovery->data.hints[0] & HINT_EXTENSION) {
+			info = skb_put(tx_skb, 2);
+			info[0] = discovery->data.hints[0];
+			info[1] = discovery->data.hints[1];
+		} else {
+			info = skb_put(tx_skb, 1);
+			info[0] = discovery->data.hints[0];
+		}
+		info = skb_put(tx_skb, 1);
+		info[0] = discovery->data.charset;
+
+		len = IRDA_MIN(discovery->name_len, skb_tailroom(tx_skb));
+		info = skb_put(tx_skb, len);
+		memcpy(info, discovery->data.info, len);
+	}
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_discovery_xid_rsp (skb, info)
+ *
+ *    Received a XID discovery response
+ *
+ */
+static void irlap_recv_discovery_xid_rsp(struct irlap_cb *self,
+					 struct sk_buff *skb,
+					 struct irlap_info *info)
+{
+	struct xid_frame *xid;
+	discovery_t *discovery = NULL;
+	__u8 *discovery_info;
+	char *text;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	if (!pskb_may_pull(skb, sizeof(struct xid_frame))) {
+		IRDA_ERROR("%s: frame to short!\n", __FUNCTION__);
+		return;
+	}
+		
+	xid = (struct xid_frame *) skb->data;
+
+	info->daddr = le32_to_cpu(xid->saddr);
+	info->saddr = le32_to_cpu(xid->daddr);
+
+	/* Make sure frame is addressed to us */
+	if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) {
+		IRDA_DEBUG(0, "%s(), frame is not addressed to us!\n",
+			   __FUNCTION__);
+		return;
+	}
+
+	if ((discovery = kmalloc(sizeof(discovery_t), GFP_ATOMIC)) == NULL) {
+		IRDA_WARNING("%s: kmalloc failed!\n", __FUNCTION__);
+		return;
+	}
+	memset(discovery, 0, sizeof(discovery_t));
+
+	discovery->data.daddr = info->daddr;
+	discovery->data.saddr = self->saddr;
+	discovery->timestamp = jiffies;
+
+	IRDA_DEBUG(4, "%s(), daddr=%08x\n", __FUNCTION__,
+		   discovery->data.daddr);
+
+	discovery_info = skb_pull(skb, sizeof(struct xid_frame));
+
+	/* Get info returned from peer */
+	discovery->data.hints[0] = discovery_info[0];
+	if (discovery_info[0] & HINT_EXTENSION) {
+		IRDA_DEBUG(4, "EXTENSION\n");
+		discovery->data.hints[1] = discovery_info[1];
+		discovery->data.charset = discovery_info[2];
+		text = (char *) &discovery_info[3];
+	} else {
+		discovery->data.hints[1] = 0;
+		discovery->data.charset = discovery_info[1];
+		text = (char *) &discovery_info[2];
+	}
+	/*
+	 *  Terminate info string, should be safe since this is where the
+	 *  FCS bytes resides.
+	 */
+	skb->data[skb->len] = '\0';
+	strncpy(discovery->data.info, text, NICKNAME_MAX_LEN);
+	discovery->name_len = strlen(discovery->data.info);
+
+	info->discovery = discovery;
+
+	irlap_do_event(self, RECV_DISCOVERY_XID_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_discovery_xid_cmd (skb, info)
+ *
+ *    Received a XID discovery command
+ *
+ */
+static void irlap_recv_discovery_xid_cmd(struct irlap_cb *self,
+					 struct sk_buff *skb,
+					 struct irlap_info *info)
+{
+	struct xid_frame *xid;
+	discovery_t *discovery = NULL;
+	__u8 *discovery_info;
+	char *text;
+
+	if (!pskb_may_pull(skb, sizeof(struct xid_frame))) {
+		IRDA_ERROR("%s: frame to short!\n", __FUNCTION__);
+		return;
+	}
+	
+	xid = (struct xid_frame *) skb->data;
+
+	info->daddr = le32_to_cpu(xid->saddr);
+	info->saddr = le32_to_cpu(xid->daddr);
+
+	/* Make sure frame is addressed to us */
+	if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) {
+		IRDA_DEBUG(0, "%s(), frame is not addressed to us!\n",
+			   __FUNCTION__);
+		return;
+	}
+
+	switch (xid->flags & 0x03) {
+	case 0x00:
+		info->S = 1;
+		break;
+	case 0x01:
+		info->S = 6;
+		break;
+	case 0x02:
+		info->S = 8;
+		break;
+	case 0x03:
+		info->S = 16;
+		break;
+	default:
+		/* Error!! */
+		return;
+	}
+	info->s = xid->slotnr;
+
+	discovery_info = skb_pull(skb, sizeof(struct xid_frame));
+
+	/*
+	 *  Check if last frame
+	 */
+	if (info->s == 0xff) {
+		/* Check if things are sane at this point... */
+		if((discovery_info == NULL) || 
+		   !pskb_may_pull(skb, 3)) {
+			IRDA_ERROR("%s: discovery frame to short!\n",
+				   __FUNCTION__);
+			return;
+		}
+
+		/*
+		 *  We now have some discovery info to deliver!
+		 */
+		discovery = kmalloc(sizeof(discovery_t), GFP_ATOMIC);
+		if (!discovery) {
+			IRDA_WARNING("%s: unable to malloc!\n", __FUNCTION__);
+			return;
+		}
+
+		discovery->data.daddr = info->daddr;
+		discovery->data.saddr = self->saddr;
+		discovery->timestamp = jiffies;
+
+		discovery->data.hints[0] = discovery_info[0];
+		if (discovery_info[0] & HINT_EXTENSION) {
+			discovery->data.hints[1] = discovery_info[1];
+			discovery->data.charset = discovery_info[2];
+			text = (char *) &discovery_info[3];
+		} else {
+			discovery->data.hints[1] = 0;
+			discovery->data.charset = discovery_info[1];
+			text = (char *) &discovery_info[2];
+		}
+		/*
+		 *  Terminate string, should be safe since this is where the
+		 *  FCS bytes resides.
+		 */
+		skb->data[skb->len] = '\0';
+		strncpy(discovery->data.info, text, NICKNAME_MAX_LEN);
+		discovery->name_len = strlen(discovery->data.info);
+
+		info->discovery = discovery;
+	} else
+		info->discovery = NULL;
+
+	irlap_do_event(self, RECV_DISCOVERY_XID_CMD, skb, info);
+}
+
+/*
+ * Function irlap_send_rr_frame (self, command)
+ *
+ *    Build and transmit RR (Receive Ready) frame. Notice that it is currently
+ *    only possible to send RR frames with the poll bit set.
+ */
+void irlap_send_rr_frame(struct irlap_cb *self, int command)
+{
+	struct sk_buff *tx_skb;
+	__u8 *frame;
+
+	tx_skb = dev_alloc_skb(16);
+	if (!tx_skb)
+		return;
+
+	frame = skb_put(tx_skb, 2);
+
+	frame[0] = self->caddr;
+	frame[0] |= (command) ? CMD_FRAME : 0;
+
+	frame[1] = RR | PF_BIT | (self->vr << 5);
+
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_send_rd_frame (self)
+ *
+ *    Request disconnect. Used by a secondary station to request the
+ *    disconnection of the link.
+ */
+void irlap_send_rd_frame(struct irlap_cb *self)
+{
+	struct sk_buff *tx_skb;
+	__u8 *frame;
+
+	tx_skb = dev_alloc_skb(16);
+	if (!tx_skb)
+		return;
+
+	frame = skb_put(tx_skb, 2);
+
+	frame[0] = self->caddr;
+	frame[1] = RD_RSP | PF_BIT;
+
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_rr_frame (skb, info)
+ *
+ *    Received RR (Receive Ready) frame from peer station, no harm in
+ *    making it inline since its called only from one single place
+ *    (irlap_driver_rcv).
+ */
+static inline void irlap_recv_rr_frame(struct irlap_cb *self,
+				       struct sk_buff *skb,
+				       struct irlap_info *info, int command)
+{
+	info->nr = skb->data[1] >> 5;
+
+	/* Check if this is a command or a response frame */
+	if (command)
+		irlap_do_event(self, RECV_RR_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_RR_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_rnr_frame (self, skb, info)
+ *
+ *    Received RNR (Receive Not Ready) frame from peer station
+ *
+ */
+static void irlap_recv_rnr_frame(struct irlap_cb *self, struct sk_buff *skb,
+				 struct irlap_info *info, int command)
+{
+	info->nr = skb->data[1] >> 5;
+
+	IRDA_DEBUG(4, "%s(), nr=%d, %ld\n", __FUNCTION__, info->nr, jiffies);
+
+	if (command)
+		irlap_do_event(self, RECV_RNR_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_RNR_RSP, skb, info);
+}
+
+static void irlap_recv_rej_frame(struct irlap_cb *self, struct sk_buff *skb,
+				 struct irlap_info *info, int command)
+{
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__);
+
+	info->nr = skb->data[1] >> 5;
+
+	/* Check if this is a command or a response frame */
+	if (command)
+		irlap_do_event(self, RECV_REJ_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_REJ_RSP, skb, info);
+}
+
+static void irlap_recv_srej_frame(struct irlap_cb *self, struct sk_buff *skb,
+				  struct irlap_info *info, int command)
+{
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__);
+
+	info->nr = skb->data[1] >> 5;
+
+	/* Check if this is a command or a response frame */
+	if (command)
+		irlap_do_event(self, RECV_SREJ_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_SREJ_RSP, skb, info);
+}
+
+static void irlap_recv_disc_frame(struct irlap_cb *self, struct sk_buff *skb,
+				  struct irlap_info *info, int command)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Check if this is a command or a response frame */
+	if (command)
+		irlap_do_event(self, RECV_DISC_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_RD_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_ua_frame (skb, frame)
+ *
+ *    Received UA (Unnumbered Acknowledgement) frame
+ *
+ */
+static inline void irlap_recv_ua_frame(struct irlap_cb *self,
+				       struct sk_buff *skb,
+				       struct irlap_info *info)
+{
+	irlap_do_event(self, RECV_UA_RSP, skb, info);
+}
+
+/*
+ * Function irlap_send_data_primary(self, skb)
+ *
+ *    Send I-frames as the primary station but without the poll bit set
+ *
+ */
+void irlap_send_data_primary(struct irlap_cb *self, struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb;
+
+	if (skb->data[1] == I_FRAME) {
+
+		/*
+		 *  Insert frame sequence number (Vs) in control field before
+		 *  inserting into transmit window queue.
+		 */
+		skb->data[1] = I_FRAME | (self->vs << 1);
+
+		/*
+		 *  Insert frame in store, in case of retransmissions
+		 *  Increase skb reference count, see irlap_do_event()
+		 */
+		skb_get(skb);
+		skb_queue_tail(&self->wx_list, skb);
+
+		/* Copy buffer */
+		tx_skb = skb_clone(skb, GFP_ATOMIC);
+		if (tx_skb == NULL) {
+			return;
+		}
+
+		self->vs = (self->vs + 1) % 8;
+		self->ack_required = FALSE;
+		self->window -= 1;
+
+		irlap_send_i_frame( self, tx_skb, CMD_FRAME);
+	} else {
+		IRDA_DEBUG(4, "%s(), sending unreliable frame\n", __FUNCTION__);
+		irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME);
+		self->window -= 1;
+	}
+}
+/*
+ * Function irlap_send_data_primary_poll (self, skb)
+ *
+ *    Send I(nformation) frame as primary with poll bit set
+ */
+void irlap_send_data_primary_poll(struct irlap_cb *self, struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb;
+	int transmission_time;
+
+	/* Stop P timer */
+	del_timer(&self->poll_timer);
+
+	/* Is this reliable or unreliable data? */
+	if (skb->data[1] == I_FRAME) {
+
+		/*
+		 *  Insert frame sequence number (Vs) in control field before
+		 *  inserting into transmit window queue.
+		 */
+		skb->data[1] = I_FRAME | (self->vs << 1);
+
+		/*
+		 *  Insert frame in store, in case of retransmissions
+		 *  Increase skb reference count, see irlap_do_event()
+		 */
+		skb_get(skb);
+		skb_queue_tail(&self->wx_list, skb);
+
+		/* Copy buffer */
+		tx_skb = skb_clone(skb, GFP_ATOMIC);
+		if (tx_skb == NULL) {
+			return;
+		}
+
+		/*
+		 *  Set poll bit if necessary. We do this to the copied
+		 *  skb, since retransmitted need to set or clear the poll
+		 *  bit depending on when they are sent.
+		 */
+		tx_skb->data[1] |= PF_BIT;
+
+		self->vs = (self->vs + 1) % 8;
+		self->ack_required = FALSE;
+
+		irlap_send_i_frame(self, tx_skb, CMD_FRAME);
+	} else {
+		IRDA_DEBUG(4, "%s(), sending unreliable frame\n", __FUNCTION__);
+
+		if (self->ack_required) {
+			irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME);
+			irlap_send_rr_frame(self, CMD_FRAME);
+			self->ack_required = FALSE;
+		} else {
+			skb->data[1] |= PF_BIT;
+			irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME);
+		}
+	}
+
+	/* How much time we took for transmission of all frames.
+	 * We don't know, so let assume we used the full window. Jean II */
+	transmission_time = self->final_timeout;
+
+	/* Reset parameter so that we can fill next window */
+	self->window = self->window_size;
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	/* Remove what we have not used. Just do a prorata of the
+	 * bytes left in window to window capacity.
+	 * See max_line_capacities[][] in qos.c for details. Jean II */
+	transmission_time -= (self->final_timeout * self->bytes_left
+			      / self->line_capacity);
+	IRDA_DEBUG(4, "%s() adjusting transmission_time : ft=%d, bl=%d, lc=%d -> tt=%d\n", __FUNCTION__, self->final_timeout, self->bytes_left, self->line_capacity, transmission_time);
+
+	/* We are allowed to transmit a maximum number of bytes again. */
+	self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+	/*
+	 * The network layer has a intermediate buffer between IrLAP
+	 * and the IrDA driver which can contain 8 frames. So, even
+	 * though IrLAP is currently sending the *last* frame of the
+	 * tx-window, the driver most likely has only just started
+	 * sending the *first* frame of the same tx-window.
+	 * I.e. we are always at the very begining of or Tx window.
+	 * Now, we are supposed to set the final timer from the end
+	 * of our tx-window to let the other peer reply. So, we need
+	 * to add extra time to compensate for the fact that we
+	 * are really at the start of tx-window, otherwise the final timer
+	 * might expire before he can answer...
+	 * Jean II
+	 */
+	irlap_start_final_timer(self, self->final_timeout + transmission_time);
+
+	/*
+	 * The clever amongst you might ask why we do this adjustement
+	 * only here, and not in all the other cases in irlap_event.c.
+	 * In all those other case, we only send a very short management
+	 * frame (few bytes), so the adjustement would be lost in the
+	 * noise...
+	 * The exception of course is irlap_resend_rejected_frame().
+	 * Jean II */
+}
+
+/*
+ * Function irlap_send_data_secondary_final (self, skb)
+ *
+ *    Send I(nformation) frame as secondary with final bit set
+ *
+ */
+void irlap_send_data_secondary_final(struct irlap_cb *self,
+				     struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb = NULL;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/* Is this reliable or unreliable data? */
+	if (skb->data[1] == I_FRAME) {
+
+		/*
+		 *  Insert frame sequence number (Vs) in control field before
+		 *  inserting into transmit window queue.
+		 */
+		skb->data[1] = I_FRAME | (self->vs << 1);
+
+		/*
+		 *  Insert frame in store, in case of retransmissions
+		 *  Increase skb reference count, see irlap_do_event()
+		 */
+		skb_get(skb);
+		skb_queue_tail(&self->wx_list, skb);
+
+		tx_skb = skb_clone(skb, GFP_ATOMIC);
+		if (tx_skb == NULL) {
+			return;
+		}
+
+		tx_skb->data[1] |= PF_BIT;
+
+		self->vs = (self->vs + 1) % 8;
+		self->ack_required = FALSE;
+
+		irlap_send_i_frame(self, tx_skb, RSP_FRAME);
+	} else {
+		if (self->ack_required) {
+			irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME);
+			irlap_send_rr_frame(self, RSP_FRAME);
+			self->ack_required = FALSE;
+		} else {
+			skb->data[1] |= PF_BIT;
+			irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME);
+		}
+	}
+
+	self->window = self->window_size;
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	/* We are allowed to transmit a maximum number of bytes again. */
+	self->bytes_left = self->line_capacity;
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+
+	irlap_start_wd_timer(self, self->wd_timeout);
+}
+
+/*
+ * Function irlap_send_data_secondary (self, skb)
+ *
+ *    Send I(nformation) frame as secondary without final bit set
+ *
+ */
+void irlap_send_data_secondary(struct irlap_cb *self, struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb = NULL;
+
+	/* Is this reliable or unreliable data? */
+	if (skb->data[1] == I_FRAME) {
+
+		/*
+		 *  Insert frame sequence number (Vs) in control field before
+		 *  inserting into transmit window queue.
+		 */
+		skb->data[1] = I_FRAME | (self->vs << 1);
+
+		/*
+		 *  Insert frame in store, in case of retransmissions
+		 *  Increase skb reference count, see irlap_do_event()
+		 */
+		skb_get(skb);
+		skb_queue_tail(&self->wx_list, skb);
+
+		tx_skb = skb_clone(skb, GFP_ATOMIC);
+		if (tx_skb == NULL) {
+			return;
+		}
+
+		self->vs = (self->vs + 1) % 8;
+		self->ack_required = FALSE;
+		self->window -= 1;
+
+		irlap_send_i_frame(self, tx_skb, RSP_FRAME);
+	} else {
+		irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME);
+		self->window -= 1;
+	}
+}
+
+/*
+ * Function irlap_resend_rejected_frames (nr)
+ *
+ *    Resend frames which has not been acknowledged. Should be safe to
+ *    traverse the list without locking it since this function will only be
+ *    called from interrupt context (BH)
+ */
+void irlap_resend_rejected_frames(struct irlap_cb *self, int command)
+{
+	struct sk_buff *tx_skb;
+	struct sk_buff *skb;
+	int count;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/* Initialize variables */
+	count = skb_queue_len(&self->wx_list);
+
+	/*  Resend unacknowledged frame(s) */
+	skb = skb_peek(&self->wx_list);
+	while (skb != NULL) {
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+
+		/* We copy the skb to be retransmitted since we will have to
+		 * modify it. Cloning will confuse packet sniffers
+		 */
+		/* tx_skb = skb_clone( skb, GFP_ATOMIC); */
+		tx_skb = skb_copy(skb, GFP_ATOMIC);
+		if (!tx_skb) {
+			IRDA_DEBUG(0, "%s(), unable to copy\n", __FUNCTION__);
+			return;
+		}
+		/* Unlink tx_skb from list */
+		tx_skb->next = tx_skb->prev = NULL;
+		tx_skb->list = NULL;
+
+		/* Clear old Nr field + poll bit */
+		tx_skb->data[1] &= 0x0f;
+
+		/*
+		 *  Set poll bit on the last frame retransmitted
+		 */
+		if (count-- == 1)
+			tx_skb->data[1] |= PF_BIT; /* Set p/f bit */
+		else
+			tx_skb->data[1] &= ~PF_BIT; /* Clear p/f bit */
+
+		irlap_send_i_frame(self, tx_skb, command);
+
+		/*
+		 *  If our skb is the last buffer in the list, then
+		 *  we are finished, if not, move to the next sk-buffer
+		 */
+		if (skb == skb_peek_tail(&self->wx_list))
+			skb = NULL;
+		else
+			skb = skb->next;
+	}
+#if 0 /* Not yet */
+	/*
+	 *  We can now fill the window with additional data frames
+	 */
+	while (skb_queue_len( &self->txq) > 0) {
+
+		IRDA_DEBUG(0, "%s(), sending additional frames!\n", __FUNCTION__);
+		if ((skb_queue_len( &self->txq) > 0) &&
+		    (self->window > 0)) {
+			skb = skb_dequeue( &self->txq);
+			IRDA_ASSERT(skb != NULL, return;);
+
+			/*
+			 *  If send window > 1 then send frame with pf
+			 *  bit cleared
+			 */
+			if ((self->window > 1) &&
+			    skb_queue_len(&self->txq) > 0)
+			{
+				irlap_send_data_primary(self, skb);
+			} else {
+				irlap_send_data_primary_poll(self, skb);
+			}
+			kfree_skb(skb);
+		}
+	}
+#endif
+}
+
+void irlap_resend_rejected_frame(struct irlap_cb *self, int command)
+{
+	struct sk_buff *tx_skb;
+	struct sk_buff *skb;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	/*  Resend unacknowledged frame(s) */
+	skb = skb_peek(&self->wx_list);
+	if (skb != NULL) {
+		irlap_wait_min_turn_around(self, &self->qos_tx);
+
+		/* We copy the skb to be retransmitted since we will have to
+		 * modify it. Cloning will confuse packet sniffers
+		 */
+		/* tx_skb = skb_clone( skb, GFP_ATOMIC); */
+		tx_skb = skb_copy(skb, GFP_ATOMIC);
+		if (!tx_skb) {
+			IRDA_DEBUG(0, "%s(), unable to copy\n", __FUNCTION__);
+			return;
+		}
+		/* Unlink tx_skb from list */
+		tx_skb->next = tx_skb->prev = NULL;
+		tx_skb->list = NULL;
+
+		/* Clear old Nr field + poll bit */
+		tx_skb->data[1] &= 0x0f;
+
+		/*  Set poll/final bit */
+		tx_skb->data[1] |= PF_BIT; /* Set p/f bit */
+
+		irlap_send_i_frame(self, tx_skb, command);
+	}
+}
+
+/*
+ * Function irlap_send_ui_frame (self, skb, command)
+ *
+ *    Contruct and transmit an Unnumbered Information (UI) frame
+ *
+ */
+void irlap_send_ui_frame(struct irlap_cb *self, struct sk_buff *skb,
+			 __u8 caddr, int command)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/* Insert connection address */
+	skb->data[0] = caddr | ((command) ? CMD_FRAME : 0);
+
+	irlap_queue_xmit(self, skb);
+}
+
+/*
+ * Function irlap_send_i_frame (skb)
+ *
+ *    Contruct and transmit Information (I) frame
+ */
+static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb,
+			       int command)
+{
+	/* Insert connection address */
+	skb->data[0] = self->caddr;
+	skb->data[0] |= (command) ? CMD_FRAME : 0;
+
+	/* Insert next to receive (Vr) */
+	skb->data[1] |= (self->vr << 5);  /* insert nr */
+
+	irlap_queue_xmit(self, skb);
+}
+
+/*
+ * Function irlap_recv_i_frame (skb, frame)
+ *
+ *    Receive and parse an I (Information) frame, no harm in making it inline
+ *    since it's called only from one single place (irlap_driver_rcv).
+ */
+static inline void irlap_recv_i_frame(struct irlap_cb *self,
+				      struct sk_buff *skb,
+				      struct irlap_info *info, int command)
+{
+	info->nr = skb->data[1] >> 5;          /* Next to receive */
+	info->pf = skb->data[1] & PF_BIT;      /* Final bit */
+	info->ns = (skb->data[1] >> 1) & 0x07; /* Next to send */
+
+	/* Check if this is a command or a response frame */
+	if (command)
+		irlap_do_event(self, RECV_I_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_I_RSP, skb, info);
+}
+
+/*
+ * Function irlap_recv_ui_frame (self, skb, info)
+ *
+ *    Receive and parse an Unnumbered Information (UI) frame
+ *
+ */
+static void irlap_recv_ui_frame(struct irlap_cb *self, struct sk_buff *skb,
+				struct irlap_info *info)
+{
+	IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+	info->pf = skb->data[1] & PF_BIT;      /* Final bit */
+
+	irlap_do_event(self, RECV_UI_FRAME, skb, info);
+}
+
+/*
+ * Function irlap_recv_frmr_frame (skb, frame)
+ *
+ *    Received Frame Reject response.
+ *
+ */
+static void irlap_recv_frmr_frame(struct irlap_cb *self, struct sk_buff *skb,
+				  struct irlap_info *info)
+{
+	__u8 *frame;
+	int w, x, y, z;
+
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(info != NULL, return;);
+
+	if (!pskb_may_pull(skb, 4)) {
+		IRDA_ERROR("%s: frame to short!\n", __FUNCTION__);
+		return;
+	}
+
+	frame = skb->data;
+
+	info->nr = frame[2] >> 5;          /* Next to receive */
+	info->pf = frame[2] & PF_BIT;      /* Final bit */
+	info->ns = (frame[2] >> 1) & 0x07; /* Next to send */
+
+	w = frame[3] & 0x01;
+	x = frame[3] & 0x02;
+	y = frame[3] & 0x04;
+	z = frame[3] & 0x08;
+
+	if (w) {
+		IRDA_DEBUG(0, "Rejected control field is undefined or not "
+		      "implemented.\n");
+	}
+	if (x) {
+		IRDA_DEBUG(0, "Rejected control field was invalid because it "
+		      "contained a non permitted I field.\n");
+	}
+	if (y) {
+		IRDA_DEBUG(0, "Received I field exceeded the maximum negotiated "
+		      "for the existing connection or exceeded the maximum "
+		      "this station supports if no connection exists.\n");
+	}
+	if (z) {
+		IRDA_DEBUG(0, "Rejected control field control field contained an "
+		      "invalid Nr count.\n");
+	}
+	irlap_do_event(self, RECV_FRMR_RSP, skb, info);
+}
+
+/*
+ * Function irlap_send_test_frame (self, daddr)
+ *
+ *    Send a test frame response
+ *
+ */
+void irlap_send_test_frame(struct irlap_cb *self, __u8 caddr, __u32 daddr,
+			   struct sk_buff *cmd)
+{
+	struct sk_buff *tx_skb;
+	struct test_frame *frame;
+	__u8 *info;
+
+	tx_skb = dev_alloc_skb(cmd->len+sizeof(struct test_frame));
+	if (!tx_skb)
+		return;
+
+	/* Broadcast frames must include saddr and daddr fields */
+	if (caddr == CBROADCAST) {
+		frame = (struct test_frame *)
+			skb_put(tx_skb, sizeof(struct test_frame));
+
+		/* Insert the swapped addresses */
+		frame->saddr = cpu_to_le32(self->saddr);
+		frame->daddr = cpu_to_le32(daddr);
+	} else
+		frame = (struct test_frame *) skb_put(tx_skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER);
+
+	frame->caddr = caddr;
+	frame->control = TEST_RSP | PF_BIT;
+
+	/* Copy info */
+	info = skb_put(tx_skb, cmd->len);
+	memcpy(info, cmd->data, cmd->len);
+
+	/* Return to sender */
+	irlap_wait_min_turn_around(self, &self->qos_tx);
+	irlap_queue_xmit(self, tx_skb);
+}
+
+/*
+ * Function irlap_recv_test_frame (self, skb)
+ *
+ *    Receive a test frame
+ *
+ */
+static void irlap_recv_test_frame(struct irlap_cb *self, struct sk_buff *skb,
+				  struct irlap_info *info, int command)
+{
+	struct test_frame *frame;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	if (!pskb_may_pull(skb, sizeof(*frame))) {
+		IRDA_ERROR("%s: frame to short!\n", __FUNCTION__);
+		return;
+	}
+	frame = (struct test_frame *) skb->data;
+
+	/* Broadcast frames must carry saddr and daddr fields */
+	if (info->caddr == CBROADCAST) {
+		if (skb->len < sizeof(struct test_frame)) {
+			IRDA_DEBUG(0, "%s() test frame to short!\n",
+				   __FUNCTION__);
+			return;
+		}
+
+		/* Read and swap addresses */
+		info->daddr = le32_to_cpu(frame->saddr);
+		info->saddr = le32_to_cpu(frame->daddr);
+
+		/* Make sure frame is addressed to us */
+		if ((info->saddr != self->saddr) &&
+		    (info->saddr != BROADCAST)) {
+			return;
+		}
+	}
+
+	if (command)
+		irlap_do_event(self, RECV_TEST_CMD, skb, info);
+	else
+		irlap_do_event(self, RECV_TEST_RSP, skb, info);
+}
+
+/*
+ * Function irlap_driver_rcv (skb, netdev, ptype)
+ *
+ *    Called when a frame is received. Dispatches the right receive function
+ *    for processing of the frame.
+ *
+ * Note on skb management :
+ * After calling the higher layers of the IrDA stack, we always
+ * kfree() the skb, which drop the reference count (and potentially
+ * destroy it).
+ * If a higher layer of the stack want to keep the skb around (to put
+ * in a queue or pass it to the higher layer), it will need to use
+ * skb_get() to keep a reference on it. This is usually done at the
+ * LMP level in irlmp.c.
+ * Jean II
+ */
+int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev,
+		     struct packet_type *ptype)
+{
+	struct irlap_info info;
+	struct irlap_cb *self;
+	int command;
+	__u8 control;
+
+	/* FIXME: should we get our own field? */
+	self = (struct irlap_cb *) dev->atalk_ptr;
+
+	/* If the net device is down, then IrLAP is gone! */
+	if (!self || self->magic != LAP_MAGIC) {
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	/* We are no longer an "old" protocol, so we need to handle
+	 * share and non linear skbs. This should never happen, so
+	 * we don't need to be clever about it. Jean II */
+	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
+		IRDA_ERROR("%s: can't clone shared skb!\n", __FUNCTION__);
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	/* Check if frame is large enough for parsing */
+	if (!pskb_may_pull(skb, 2)) {
+		IRDA_ERROR("%s: frame to short!\n", __FUNCTION__);
+		dev_kfree_skb(skb);
+		return -1;
+	}
+
+	command    = skb->data[0] & CMD_FRAME;
+	info.caddr = skb->data[0] & CBROADCAST;
+
+	info.pf      = skb->data[1] &  PF_BIT;
+	info.control = skb->data[1] & ~PF_BIT; /* Mask away poll/final bit */
+
+	control = info.control;
+
+	/*  First we check if this frame has a valid connection address */
+	if ((info.caddr != self->caddr) && (info.caddr != CBROADCAST)) {
+		IRDA_DEBUG(0, "%s(), wrong connection address!\n",
+			   __FUNCTION__);
+		goto out;
+	}
+	/*
+	 *  Optimize for the common case and check if the frame is an
+	 *  I(nformation) frame. Only I-frames have bit 0 set to 0
+	 */
+	if (~control & 0x01) {
+		irlap_recv_i_frame(self, skb, &info, command);
+		goto out;
+	}
+	/*
+	 *  We now check is the frame is an S(upervisory) frame. Only
+	 *  S-frames have bit 0 set to 1 and bit 1 set to 0
+	 */
+	if (~control & 0x02) {
+		/*
+		 *  Received S(upervisory) frame, check which frame type it is
+		 *  only the first nibble is of interest
+		 */
+		switch (control & 0x0f) {
+		case RR:
+			irlap_recv_rr_frame(self, skb, &info, command);
+			break;
+		case RNR:
+			irlap_recv_rnr_frame(self, skb, &info, command);
+			break;
+		case REJ:
+			irlap_recv_rej_frame(self, skb, &info, command);
+			break;
+		case SREJ:
+			irlap_recv_srej_frame(self, skb, &info, command);
+			break;
+		default:
+			IRDA_WARNING("%s: Unknown S-frame %02x received!\n",
+				__FUNCTION__, info.control);
+			break;
+		}
+		goto out;
+	}
+	/*
+	 *  This must be a C(ontrol) frame
+	 */
+	switch (control) {
+	case XID_RSP:
+		irlap_recv_discovery_xid_rsp(self, skb, &info);
+		break;
+	case XID_CMD:
+		irlap_recv_discovery_xid_cmd(self, skb, &info);
+		break;
+	case SNRM_CMD:
+		irlap_recv_snrm_cmd(self, skb, &info);
+		break;
+	case DM_RSP:
+		irlap_do_event(self, RECV_DM_RSP, skb, &info);
+		break;
+	case DISC_CMD: /* And RD_RSP since they have the same value */
+		irlap_recv_disc_frame(self, skb, &info, command);
+		break;
+	case TEST_CMD:
+		irlap_recv_test_frame(self, skb, &info, command);
+		break;
+	case UA_RSP:
+		irlap_recv_ua_frame(self, skb, &info);
+		break;
+	case FRMR_RSP:
+		irlap_recv_frmr_frame(self, skb, &info);
+		break;
+	case UI_FRAME:
+		irlap_recv_ui_frame(self, skb, &info);
+		break;
+	default:
+		IRDA_WARNING("%s: Unknown frame %02x received!\n",
+				__FUNCTION__, info.control);
+		break;
+	}
+out:
+	/* Always drop our reference on the skb */
+	dev_kfree_skb(skb);
+	return 0;
+}
diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c
new file mode 100644
index 00000000000..7a4a4d7fbe6
--- /dev/null
+++ b/net/irda/irlmp.c
@@ -0,0 +1,2041 @@
+/*********************************************************************
+ *
+ * Filename:      irlmp.c
+ * Version:       1.0
+ * Description:   IrDA Link Management Protocol (LMP) layer
+ * Status:        Stable.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 17 20:54:32 1997
+ * Modified at:   Wed Jan  5 11:26:03 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/kmod.h>
+#include <linux/random.h>
+#include <linux/seq_file.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/timer.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+
+static __u8 irlmp_find_free_slsap(void);
+static int irlmp_slsap_inuse(__u8 slsap_sel);
+
+/* Master structure */
+struct irlmp_cb *irlmp = NULL;
+
+/* These can be altered by the sysctl interface */
+int  sysctl_discovery         = 0;
+int  sysctl_discovery_timeout = 3; /* 3 seconds by default */
+EXPORT_SYMBOL(sysctl_discovery_timeout);
+int  sysctl_discovery_slots   = 6; /* 6 slots by default */
+int  sysctl_lap_keepalive_time = LM_IDLE_TIMEOUT * 1000 / HZ;
+char sysctl_devname[65];
+
+const char *irlmp_reasons[] = {
+	"ERROR, NOT USED",
+	"LM_USER_REQUEST",
+	"LM_LAP_DISCONNECT",
+	"LM_CONNECT_FAILURE",
+	"LM_LAP_RESET",
+	"LM_INIT_DISCONNECT",
+	"ERROR, NOT USED",
+};
+EXPORT_SYMBOL(irlmp_reasons);
+
+/*
+ * Function irlmp_init (void)
+ *
+ *    Create (allocate) the main IrLMP structure
+ *
+ */
+int __init irlmp_init(void)
+{
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	/* Initialize the irlmp structure. */
+	irlmp = kmalloc( sizeof(struct irlmp_cb), GFP_KERNEL);
+	if (irlmp == NULL)
+		return -ENOMEM;
+	memset(irlmp, 0, sizeof(struct irlmp_cb));
+
+	irlmp->magic = LMP_MAGIC;
+
+	irlmp->clients = hashbin_new(HB_LOCK);
+	irlmp->services = hashbin_new(HB_LOCK);
+	irlmp->links = hashbin_new(HB_LOCK);
+	irlmp->unconnected_lsaps = hashbin_new(HB_LOCK);
+	irlmp->cachelog = hashbin_new(HB_NOLOCK);
+
+	if ((irlmp->clients == NULL) ||
+	    (irlmp->services == NULL) ||
+	    (irlmp->links == NULL) ||
+	    (irlmp->unconnected_lsaps == NULL) ||
+	    (irlmp->cachelog == NULL)) {
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&irlmp->cachelog->hb_spinlock);
+
+	irlmp->last_lsap_sel = 0x0f; /* Reserved 0x00-0x0f */
+	strcpy(sysctl_devname, "Linux");
+
+	/* Do discovery every 3 seconds */
+	init_timer(&irlmp->discovery_timer);
+	irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout*HZ);
+
+	return 0;
+}
+
+/*
+ * Function irlmp_cleanup (void)
+ *
+ *    Remove IrLMP layer
+ *
+ */
+void __exit irlmp_cleanup(void) 
+{
+	/* Check for main structure */
+	IRDA_ASSERT(irlmp != NULL, return;);
+	IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;);
+
+	del_timer(&irlmp->discovery_timer);
+
+	hashbin_delete(irlmp->links, (FREE_FUNC) kfree);
+	hashbin_delete(irlmp->unconnected_lsaps, (FREE_FUNC) kfree);
+	hashbin_delete(irlmp->clients, (FREE_FUNC) kfree);
+	hashbin_delete(irlmp->services, (FREE_FUNC) kfree);
+	hashbin_delete(irlmp->cachelog, (FREE_FUNC) kfree);
+
+	/* De-allocate main structure */
+	kfree(irlmp);
+	irlmp = NULL;
+}
+
+/*
+ * Function irlmp_open_lsap (slsap, notify)
+ *
+ *   Register with IrLMP and create a local LSAP,
+ *   returns handle to LSAP.
+ */
+struct lsap_cb *irlmp_open_lsap(__u8 slsap_sel, notify_t *notify, __u8 pid)
+{
+	struct lsap_cb *self;
+
+	IRDA_ASSERT(notify != NULL, return NULL;);
+	IRDA_ASSERT(irlmp != NULL, return NULL;);
+	IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return NULL;);
+	IRDA_ASSERT(notify->instance != NULL, return NULL;);
+
+	/*  Does the client care which Source LSAP selector it gets?  */
+	if (slsap_sel == LSAP_ANY) {
+		slsap_sel = irlmp_find_free_slsap();
+		if (!slsap_sel)
+			return NULL;
+	} else if (irlmp_slsap_inuse(slsap_sel))
+		return NULL;
+
+	/* Allocate new instance of a LSAP connection */
+	self = kmalloc(sizeof(struct lsap_cb), GFP_ATOMIC);
+	if (self == NULL) {
+		IRDA_ERROR("%s: can't allocate memory\n", __FUNCTION__);
+		return NULL;
+	}
+	memset(self, 0, sizeof(struct lsap_cb));
+
+	self->magic = LMP_LSAP_MAGIC;
+	self->slsap_sel = slsap_sel;
+
+	/* Fix connectionless LSAP's */
+	if (slsap_sel == LSAP_CONNLESS) {
+#ifdef CONFIG_IRDA_ULTRA
+		self->dlsap_sel = LSAP_CONNLESS;
+		self->pid = pid;
+#endif /* CONFIG_IRDA_ULTRA */
+	} else
+		self->dlsap_sel = LSAP_ANY;
+	/* self->connected = FALSE; -> already NULL via memset() */
+
+	init_timer(&self->watchdog_timer);
+
+	self->notify = *notify;
+
+	self->lsap_state = LSAP_DISCONNECTED;
+
+	/* Insert into queue of unconnected LSAPs */
+	hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self,
+		       (long) self, NULL);
+
+	return self;
+}
+EXPORT_SYMBOL(irlmp_open_lsap);
+
+/*
+ * Function __irlmp_close_lsap (self)
+ *
+ *    Remove an instance of LSAP
+ */
+static void __irlmp_close_lsap(struct lsap_cb *self)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+	/*
+	 *  Set some of the variables to preset values
+	 */
+	self->magic = 0;
+	del_timer(&self->watchdog_timer); /* Important! */
+
+	if (self->conn_skb)
+		dev_kfree_skb(self->conn_skb);
+
+	kfree(self);
+}
+
+/*
+ * Function irlmp_close_lsap (self)
+ *
+ *    Close and remove LSAP
+ *
+ */
+void irlmp_close_lsap(struct lsap_cb *self)
+{
+	struct lap_cb *lap;
+	struct lsap_cb *lsap = NULL;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+	/*
+	 *  Find out if we should remove this LSAP from a link or from the
+	 *  list of unconnected lsaps (not associated with a link)
+	 */
+	lap = self->lap;
+	if (lap) {
+		IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+		/* We might close a LSAP before it has completed the
+		 * connection setup. In those case, higher layers won't
+		 * send a proper disconnect request. Harmless, except
+		 * that we will forget to close LAP... - Jean II */
+		if(self->lsap_state != LSAP_DISCONNECTED) {
+			self->lsap_state = LSAP_DISCONNECTED;
+			irlmp_do_lap_event(self->lap,
+					   LM_LAP_DISCONNECT_REQUEST, NULL);
+		}
+		/* Now, remove from the link */
+		lsap = hashbin_remove(lap->lsaps, (long) self, NULL);
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+		lap->cache.valid = FALSE;
+#endif
+	}
+	self->lap = NULL;
+	/* Check if we found the LSAP! If not then try the unconnected lsaps */
+	if (!lsap) {
+		lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self,
+				      NULL);
+	}
+	if (!lsap) {
+		IRDA_DEBUG(0,
+		     "%s(), Looks like somebody has removed me already!\n",
+			   __FUNCTION__);
+		return;
+	}
+	__irlmp_close_lsap(self);
+}
+EXPORT_SYMBOL(irlmp_close_lsap);
+
+/*
+ * Function irlmp_register_irlap (saddr, notify)
+ *
+ *    Register IrLAP layer with IrLMP. There is possible to have multiple
+ *    instances of the IrLAP layer, each connected to different IrDA ports
+ *
+ */
+void irlmp_register_link(struct irlap_cb *irlap, __u32 saddr, notify_t *notify)
+{
+	struct lap_cb *lap;
+
+	IRDA_ASSERT(irlmp != NULL, return;);
+	IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;);
+	IRDA_ASSERT(notify != NULL, return;);
+
+	/*
+	 *  Allocate new instance of a LSAP connection
+	 */
+	lap = kmalloc(sizeof(struct lap_cb), GFP_KERNEL);
+	if (lap == NULL) {
+		IRDA_ERROR("%s: unable to kmalloc\n", __FUNCTION__);
+		return;
+	}
+	memset(lap, 0, sizeof(struct lap_cb));
+
+	lap->irlap = irlap;
+	lap->magic = LMP_LAP_MAGIC;
+	lap->saddr = saddr;
+	lap->daddr = DEV_ADDR_ANY;
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	lap->cache.valid = FALSE;
+#endif
+	lap->lsaps = hashbin_new(HB_LOCK);
+	if (lap->lsaps == NULL) {
+		IRDA_WARNING("%s(), unable to kmalloc lsaps\n", __FUNCTION__);
+		kfree(lap);
+		return;
+	}
+
+	lap->lap_state = LAP_STANDBY;
+
+	init_timer(&lap->idle_timer);
+
+	/*
+	 *  Insert into queue of LMP links
+	 */
+	hashbin_insert(irlmp->links, (irda_queue_t *) lap, lap->saddr, NULL);
+
+	/*
+	 *  We set only this variable so IrLAP can tell us on which link the
+	 *  different events happened on
+	 */
+	irda_notify_init(notify);
+	notify->instance = lap;
+}
+
+/*
+ * Function irlmp_unregister_irlap (saddr)
+ *
+ *    IrLAP layer has been removed!
+ *
+ */
+void irlmp_unregister_link(__u32 saddr)
+{
+	struct lap_cb *link;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/* We must remove ourselves from the hashbin *first*. This ensure
+	 * that no more LSAPs will be open on this link and no discovery
+	 * will be triggered anymore. Jean II */
+	link = hashbin_remove(irlmp->links, saddr, NULL);
+	if (link) {
+		IRDA_ASSERT(link->magic == LMP_LAP_MAGIC, return;);
+
+		/* Kill all the LSAPs on this link. Jean II */
+		link->reason = LAP_DISC_INDICATION;
+		link->daddr = DEV_ADDR_ANY;
+		irlmp_do_lap_event(link, LM_LAP_DISCONNECT_INDICATION, NULL);
+
+		/* Remove all discoveries discovered at this link */
+		irlmp_expire_discoveries(irlmp->cachelog, link->saddr, TRUE);
+
+		/* Final cleanup */
+		del_timer(&link->idle_timer);
+		link->magic = 0;
+		kfree(link);
+	}
+}
+
+/*
+ * Function irlmp_connect_request (handle, dlsap, userdata)
+ *
+ *    Connect with a peer LSAP
+ *
+ */
+int irlmp_connect_request(struct lsap_cb *self, __u8 dlsap_sel,
+			  __u32 saddr, __u32 daddr,
+			  struct qos_info *qos, struct sk_buff *userdata)
+{
+	struct sk_buff *tx_skb = userdata;
+	struct lap_cb *lap;
+	struct lsap_cb *lsap;
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return -EBADR;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EBADR;);
+
+	IRDA_DEBUG(2,
+	      "%s(), slsap_sel=%02x, dlsap_sel=%02x, saddr=%08x, daddr=%08x\n",
+	      __FUNCTION__, self->slsap_sel, dlsap_sel, saddr, daddr);
+
+	if (test_bit(0, &self->connected)) {
+		ret = -EISCONN;
+		goto err;
+	}
+
+	/* Client must supply destination device address */
+	if (!daddr) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* Any userdata? */
+	if (tx_skb == NULL) {
+		tx_skb = dev_alloc_skb(64);
+		if (!tx_skb)
+			return -ENOMEM;
+
+		skb_reserve(tx_skb, LMP_MAX_HEADER);
+	}
+
+	/* Make room for MUX control header (3 bytes) */
+	IRDA_ASSERT(skb_headroom(tx_skb) >= LMP_CONTROL_HEADER, return -1;);
+	skb_push(tx_skb, LMP_CONTROL_HEADER);
+
+	self->dlsap_sel = dlsap_sel;
+
+	/*
+	 * Find the link to where we should try to connect since there may
+	 * be more than one IrDA port on this machine. If the client has
+	 * passed us the saddr (and already knows which link to use), then
+	 * we use that to find the link, if not then we have to look in the
+	 * discovery log and check if any of the links has discovered a
+	 * device with the given daddr
+	 */
+	if ((!saddr) || (saddr == DEV_ADDR_ANY)) {
+		discovery_t *discovery;
+		unsigned long flags;
+
+		spin_lock_irqsave(&irlmp->cachelog->hb_spinlock, flags);
+		if (daddr != DEV_ADDR_ANY)
+			discovery = hashbin_find(irlmp->cachelog, daddr, NULL);
+		else {
+			IRDA_DEBUG(2, "%s(), no daddr\n", __FUNCTION__);
+			discovery = (discovery_t *)
+				hashbin_get_first(irlmp->cachelog);
+		}
+
+		if (discovery) {
+			saddr = discovery->data.saddr;
+			daddr = discovery->data.daddr;
+		}
+		spin_unlock_irqrestore(&irlmp->cachelog->hb_spinlock, flags);
+	}
+	lap = hashbin_lock_find(irlmp->links, saddr, NULL);
+	if (lap == NULL) {
+		IRDA_DEBUG(1, "%s(), Unable to find a usable link!\n", __FUNCTION__);
+		ret = -EHOSTUNREACH;
+		goto err;
+	}
+
+	/* Check if LAP is disconnected or already connected */
+	if (lap->daddr == DEV_ADDR_ANY)
+		lap->daddr = daddr;
+	else if (lap->daddr != daddr) {
+		/* Check if some LSAPs are active on this LAP */
+		if (HASHBIN_GET_SIZE(lap->lsaps) == 0) {
+			/* No active connection, but LAP hasn't been
+			 * disconnected yet (waiting for timeout in LAP).
+			 * Maybe we could give LAP a bit of help in this case.
+			 */
+			IRDA_DEBUG(0, "%s(), sorry, but I'm waiting for LAP to timeout!\n", __FUNCTION__);
+			ret = -EAGAIN;
+			goto err;
+		}
+
+		/* LAP is already connected to a different node, and LAP
+		 * can only talk to one node at a time */
+		IRDA_DEBUG(0, "%s(), sorry, but link is busy!\n", __FUNCTION__);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	self->lap = lap;
+
+	/*
+	 *  Remove LSAP from list of unconnected LSAPs and insert it into the
+	 *  list of connected LSAPs for the particular link
+	 */
+	lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, NULL);
+
+	IRDA_ASSERT(lsap != NULL, return -1;);
+	IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;);
+	IRDA_ASSERT(lsap->lap != NULL, return -1;);
+	IRDA_ASSERT(lsap->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+	hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, (long) self,
+		       NULL);
+
+	set_bit(0, &self->connected);	/* TRUE */
+
+	/*
+	 *  User supplied qos specifications?
+	 */
+	if (qos)
+		self->qos = *qos;
+
+	irlmp_do_lsap_event(self, LM_CONNECT_REQUEST, tx_skb);
+
+	/* Drop reference count - see irlap_data_request(). */
+	dev_kfree_skb(tx_skb);
+
+	return 0;
+
+err:
+	/* Cleanup */
+	if(tx_skb)
+		dev_kfree_skb(tx_skb);
+	return ret;
+}
+EXPORT_SYMBOL(irlmp_connect_request);
+
+/*
+ * Function irlmp_connect_indication (self)
+ *
+ *    Incoming connection
+ *
+ */
+void irlmp_connect_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+	int max_seg_size;
+	int lap_header_size;
+	int max_header_size;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(self->lap != NULL, return;);
+
+	IRDA_DEBUG(2, "%s(), slsap_sel=%02x, dlsap_sel=%02x\n",
+		   __FUNCTION__, self->slsap_sel, self->dlsap_sel);
+
+	/* Note : self->lap is set in irlmp_link_data_indication(),
+	 * (case CONNECT_CMD:) because we have no way to set it here.
+	 * Similarly, self->dlsap_sel is usually set in irlmp_find_lsap().
+	 * Jean II */
+
+	self->qos = *self->lap->qos;
+
+	max_seg_size = self->lap->qos->data_size.value-LMP_HEADER;
+	lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap);
+	max_header_size = LMP_HEADER + lap_header_size;
+
+	/* Hide LMP_CONTROL_HEADER header from layer above */
+	skb_pull(skb, LMP_CONTROL_HEADER);
+
+	if (self->notify.connect_indication) {
+		/* Don't forget to refcount it - see irlap_driver_rcv(). */
+		skb_get(skb);
+		self->notify.connect_indication(self->notify.instance, self,
+						&self->qos, max_seg_size,
+						max_header_size, skb);
+	}
+}
+
+/*
+ * Function irlmp_connect_response (handle, userdata)
+ *
+ *    Service user is accepting connection
+ *
+ */
+int irlmp_connect_response(struct lsap_cb *self, struct sk_buff *userdata)
+{
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+	IRDA_ASSERT(userdata != NULL, return -1;);
+
+	/* We set the connected bit and move the lsap to the connected list
+	 * in the state machine itself. Jean II */
+
+	IRDA_DEBUG(2, "%s(), slsap_sel=%02x, dlsap_sel=%02x\n",
+		   __FUNCTION__, self->slsap_sel, self->dlsap_sel);
+
+	/* Make room for MUX control header (3 bytes) */
+	IRDA_ASSERT(skb_headroom(userdata) >= LMP_CONTROL_HEADER, return -1;);
+	skb_push(userdata, LMP_CONTROL_HEADER);
+
+	irlmp_do_lsap_event(self, LM_CONNECT_RESPONSE, userdata);
+
+	/* Drop reference count - see irlap_data_request(). */
+	dev_kfree_skb(userdata);
+
+	return 0;
+}
+EXPORT_SYMBOL(irlmp_connect_response);
+
+/*
+ * Function irlmp_connect_confirm (handle, skb)
+ *
+ *    LSAP connection confirmed peer device!
+ */
+void irlmp_connect_confirm(struct lsap_cb *self, struct sk_buff *skb)
+{
+	int max_header_size;
+	int lap_header_size;
+	int max_seg_size;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(skb != NULL, return;);
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+	IRDA_ASSERT(self->lap != NULL, return;);
+
+	self->qos = *self->lap->qos;
+
+	max_seg_size    = self->lap->qos->data_size.value-LMP_HEADER;
+	lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap);
+	max_header_size = LMP_HEADER + lap_header_size;
+
+	IRDA_DEBUG(2, "%s(), max_header_size=%d\n",
+		   __FUNCTION__, max_header_size);
+
+	/* Hide LMP_CONTROL_HEADER header from layer above */
+	skb_pull(skb, LMP_CONTROL_HEADER);
+
+	if (self->notify.connect_confirm) {
+		/* Don't forget to refcount it - see irlap_driver_rcv() */
+		skb_get(skb);
+		self->notify.connect_confirm(self->notify.instance, self,
+					     &self->qos, max_seg_size,
+					     max_header_size, skb);
+	}
+}
+
+/*
+ * Function irlmp_dup (orig, instance)
+ *
+ *    Duplicate LSAP, can be used by servers to confirm a connection on a
+ *    new LSAP so it can keep listening on the old one.
+ *
+ */
+struct lsap_cb *irlmp_dup(struct lsap_cb *orig, void *instance)
+{
+	struct lsap_cb *new;
+	unsigned long flags;
+
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+	/* Only allowed to duplicate unconnected LSAP's, and only LSAPs
+	 * that have received a connect indication. Jean II */
+	if ((!hashbin_find(irlmp->unconnected_lsaps, (long) orig, NULL)) ||
+	    (orig->lap == NULL)) {
+		IRDA_DEBUG(0, "%s(), invalid LSAP (wrong state)\n",
+			   __FUNCTION__);
+		spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock,
+				       flags);
+		return NULL;
+	}
+
+	/* Allocate a new instance */
+	new = kmalloc(sizeof(struct lsap_cb), GFP_ATOMIC);
+	if (!new)  {
+		IRDA_DEBUG(0, "%s(), unable to kmalloc\n", __FUNCTION__);
+		spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock,
+				       flags);
+		return NULL;
+	}
+	/* Dup */
+	memcpy(new, orig, sizeof(struct lsap_cb));
+	/* new->lap = orig->lap; => done in the memcpy() */
+	/* new->slsap_sel = orig->slsap_sel; => done in the memcpy() */
+	new->conn_skb = NULL;
+
+	spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+	/* Not everything is the same */
+	new->notify.instance = instance;
+
+	init_timer(&new->watchdog_timer);
+
+	hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) new,
+		       (long) new, NULL);
+
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	/* Make sure that we invalidate the LSAP cache */
+	new->lap->cache.valid = FALSE;
+#endif /* CONFIG_IRDA_CACHE_LAST_LSAP */
+
+	return new;
+}
+EXPORT_SYMBOL(irlmp_dup);
+
+/*
+ * Function irlmp_disconnect_request (handle, userdata)
+ *
+ *    The service user is requesting disconnection, this will not remove the
+ *    LSAP, but only mark it as disconnected
+ */
+int irlmp_disconnect_request(struct lsap_cb *self, struct sk_buff *userdata)
+{
+	struct lsap_cb *lsap;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+	IRDA_ASSERT(userdata != NULL, return -1;);
+
+	/* Already disconnected ?
+	 * There is a race condition between irlmp_disconnect_indication()
+	 * and us that might mess up the hashbins below. This fixes it.
+	 * Jean II */
+	if (! test_and_clear_bit(0, &self->connected)) {
+		IRDA_DEBUG(0, "%s(), already disconnected!\n", __FUNCTION__);
+		dev_kfree_skb(userdata);
+		return -1;
+	}
+
+	skb_push(userdata, LMP_CONTROL_HEADER);
+
+	/*
+	 *  Do the event before the other stuff since we must know
+	 *  which lap layer that the frame should be transmitted on
+	 */
+	irlmp_do_lsap_event(self, LM_DISCONNECT_REQUEST, userdata);
+
+	/* Drop reference count - see irlap_data_request(). */
+	dev_kfree_skb(userdata);
+
+	/*
+	 *  Remove LSAP from list of connected LSAPs for the particular link
+	 *  and insert it into the list of unconnected LSAPs
+	 */
+	IRDA_ASSERT(self->lap != NULL, return -1;);
+	IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+	IRDA_ASSERT(self->lap->lsaps != NULL, return -1;);
+
+	lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL);
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	self->lap->cache.valid = FALSE;
+#endif
+
+	IRDA_ASSERT(lsap != NULL, return -1;);
+	IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;);
+	IRDA_ASSERT(lsap == self, return -1;);
+
+	hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self,
+		       (long) self, NULL);
+
+	/* Reset some values */
+	self->dlsap_sel = LSAP_ANY;
+	self->lap = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(irlmp_disconnect_request);
+
+/*
+ * Function irlmp_disconnect_indication (reason, userdata)
+ *
+ *    LSAP is being closed!
+ */
+void irlmp_disconnect_indication(struct lsap_cb *self, LM_REASON reason,
+				 struct sk_buff *skb)
+{
+	struct lsap_cb *lsap;
+
+	IRDA_DEBUG(1, "%s(), reason=%s\n", __FUNCTION__, irlmp_reasons[reason]);
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+	IRDA_DEBUG(3, "%s(), slsap_sel=%02x, dlsap_sel=%02x\n",
+		   __FUNCTION__, self->slsap_sel, self->dlsap_sel);
+
+	/* Already disconnected ?
+	 * There is a race condition between irlmp_disconnect_request()
+	 * and us that might mess up the hashbins below. This fixes it.
+	 * Jean II */
+	if (! test_and_clear_bit(0, &self->connected)) {
+		IRDA_DEBUG(0, "%s(), already disconnected!\n", __FUNCTION__);
+		return;
+	}
+
+	/*
+	 *  Remove association between this LSAP and the link it used
+	 */
+	IRDA_ASSERT(self->lap != NULL, return;);
+	IRDA_ASSERT(self->lap->lsaps != NULL, return;);
+
+	lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL);
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	self->lap->cache.valid = FALSE;
+#endif
+
+	IRDA_ASSERT(lsap != NULL, return;);
+	IRDA_ASSERT(lsap == self, return;);
+	hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) lsap,
+		       (long) lsap, NULL);
+
+	self->dlsap_sel = LSAP_ANY;
+	self->lap = NULL;
+
+	/*
+	 *  Inform service user
+	 */
+	if (self->notify.disconnect_indication) {
+		/* Don't forget to refcount it - see irlap_driver_rcv(). */
+		if(skb)
+			skb_get(skb);
+		self->notify.disconnect_indication(self->notify.instance,
+						   self, reason, skb);
+	} else {
+		IRDA_DEBUG(0, "%s(), no handler\n", __FUNCTION__);
+	}
+}
+
+/*
+ * Function irlmp_do_expiry (void)
+ *
+ *    Do a cleanup of the discovery log (remove old entries)
+ *
+ * Note : separate from irlmp_do_discovery() so that we can handle
+ * passive discovery properly.
+ */
+void irlmp_do_expiry(void)
+{
+	struct lap_cb *lap;
+
+	/*
+	 * Expire discovery on all links which are *not* connected.
+	 * On links which are connected, we can't do discovery
+	 * anymore and can't refresh the log, so we freeze the
+	 * discovery log to keep info about the device we are
+	 * connected to.
+	 * This info is mandatory if we want irlmp_connect_request()
+	 * to work properly. - Jean II
+	 */
+	lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+	while (lap != NULL) {
+		IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+
+		if (lap->lap_state == LAP_STANDBY) {
+			/* Expire discoveries discovered on this link */
+			irlmp_expire_discoveries(irlmp->cachelog, lap->saddr,
+						 FALSE);
+		}
+		lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+	}
+}
+
+/*
+ * Function irlmp_do_discovery (nslots)
+ *
+ *    Do some discovery on all links
+ *
+ * Note : log expiry is done above.
+ */
+void irlmp_do_discovery(int nslots)
+{
+	struct lap_cb *lap;
+
+	/* Make sure the value is sane */
+	if ((nslots != 1) && (nslots != 6) && (nslots != 8) && (nslots != 16)){
+		IRDA_WARNING("%s: invalid value for number of slots!\n",
+			     __FUNCTION__);
+		nslots = sysctl_discovery_slots = 8;
+	}
+
+	/* Construct new discovery info to be used by IrLAP, */
+	u16ho(irlmp->discovery_cmd.data.hints) = irlmp->hints.word;
+
+	/*
+	 *  Set character set for device name (we use ASCII), and
+	 *  copy device name. Remember to make room for a \0 at the
+	 *  end
+	 */
+	irlmp->discovery_cmd.data.charset = CS_ASCII;
+	strncpy(irlmp->discovery_cmd.data.info, sysctl_devname,
+		NICKNAME_MAX_LEN);
+	irlmp->discovery_cmd.name_len = strlen(irlmp->discovery_cmd.data.info);
+	irlmp->discovery_cmd.nslots = nslots;
+
+	/*
+	 * Try to send discovery packets on all links
+	 */
+	lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+	while (lap != NULL) {
+		IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+
+		if (lap->lap_state == LAP_STANDBY) {
+			/* Try to discover */
+			irlmp_do_lap_event(lap, LM_LAP_DISCOVERY_REQUEST,
+					   NULL);
+		}
+		lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+	}
+}
+
+/*
+ * Function irlmp_discovery_request (nslots)
+ *
+ *    Do a discovery of devices in front of the computer
+ *
+ * If the caller has registered a client discovery callback, this
+ * allow him to receive the full content of the discovery log through
+ * this callback (as normally he will receive only new discoveries).
+ */
+void irlmp_discovery_request(int nslots)
+{
+	/* Return current cached discovery log (in full) */
+	irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_LOG);
+
+	/*
+	 * Start a single discovery operation if discovery is not already
+         * running
+	 */
+	if (!sysctl_discovery) {
+		/* Check if user wants to override the default */
+		if (nslots == DISCOVERY_DEFAULT_SLOTS)
+			nslots = sysctl_discovery_slots;
+
+		irlmp_do_discovery(nslots);
+		/* Note : we never do expiry here. Expiry will run on the
+		 * discovery timer regardless of the state of sysctl_discovery
+		 * Jean II */
+	}
+}
+EXPORT_SYMBOL(irlmp_discovery_request);
+
+/*
+ * Function irlmp_get_discoveries (pn, mask, slots)
+ *
+ *    Return the current discovery log
+ *
+ * If discovery is not enabled, you should call this function again
+ * after 1 or 2 seconds (i.e. after discovery has been done).
+ */
+struct irda_device_info *irlmp_get_discoveries(int *pn, __u16 mask, int nslots)
+{
+	/* If discovery is not enabled, it's likely that the discovery log
+	 * will be empty. So, we trigger a single discovery, so that next
+	 * time the user call us there might be some results in the log.
+	 * Jean II
+	 */
+	if (!sysctl_discovery) {
+		/* Check if user wants to override the default */
+		if (nslots == DISCOVERY_DEFAULT_SLOTS)
+			nslots = sysctl_discovery_slots;
+
+		/* Start discovery - will complete sometime later */
+		irlmp_do_discovery(nslots);
+		/* Note : we never do expiry here. Expiry will run on the
+		 * discovery timer regardless of the state of sysctl_discovery
+		 * Jean II */
+	}
+
+	/* Return current cached discovery log */
+	return(irlmp_copy_discoveries(irlmp->cachelog, pn, mask, TRUE));
+}
+EXPORT_SYMBOL(irlmp_get_discoveries);
+
+/*
+ * Function irlmp_notify_client (log)
+ *
+ *    Notify all about discovered devices
+ *
+ * Clients registered with IrLMP are :
+ *	o IrComm
+ *	o IrLAN
+ *	o Any socket (in any state - ouch, that may be a lot !)
+ * The client may have defined a callback to be notified in case of
+ * partial/selective discovery based on the hints that it passed to IrLMP.
+ */
+static inline void
+irlmp_notify_client(irlmp_client_t *client,
+		    hashbin_t *log, DISCOVERY_MODE mode)
+{
+	discinfo_t *discoveries;	/* Copy of the discovery log */
+	int	number;			/* Number of nodes in the log */
+	int	i;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	/* Check if client wants or not partial/selective log (optimisation) */
+	if (!client->disco_callback)
+		return;
+
+	/*
+	 * Locking notes :
+	 * the old code was manipulating the log directly, which was
+	 * very racy. Now, we use copy_discoveries, that protects
+	 * itself while dumping the log for us.
+	 * The overhead of the copy is compensated by the fact that
+	 * we only pass new discoveries in normal mode and don't
+	 * pass the same old entry every 3s to the caller as we used
+	 * to do (virtual function calling is expensive).
+	 * Jean II
+	 */
+
+	/*
+	 * Now, check all discovered devices (if any), and notify client
+	 * only about the services that the client is interested in
+	 * We also notify only about the new devices unless the caller
+	 * explicitly request a dump of the log. Jean II
+	 */
+	discoveries = irlmp_copy_discoveries(log, &number,
+					     client->hint_mask.word,
+					     (mode == DISCOVERY_LOG));
+	/* Check if the we got some results */
+	if (discoveries == NULL)
+		return;	/* No nodes discovered */
+
+	/* Pass all entries to the listener */
+	for(i = 0; i < number; i++)
+		client->disco_callback(&(discoveries[i]), mode, client->priv);
+
+	/* Free up our buffer */
+	kfree(discoveries);
+}
+
+/*
+ * Function irlmp_discovery_confirm ( self, log)
+ *
+ *    Some device(s) answered to our discovery request! Check to see which
+ *    device it is, and give indication to the client(s)
+ *
+ */
+void irlmp_discovery_confirm(hashbin_t *log, DISCOVERY_MODE mode)
+{
+	irlmp_client_t *client;
+	irlmp_client_t *client_next;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(log != NULL, return;);
+
+	if (!(HASHBIN_GET_SIZE(log)))
+		return;
+
+	/* For each client - notify callback may touch client list */
+	client = (irlmp_client_t *) hashbin_get_first(irlmp->clients);
+	while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL,
+					 (void *) &client_next) ) {
+		/* Check if we should notify client */
+		irlmp_notify_client(client, log, mode);
+
+		client = client_next;
+	}
+}
+
+/*
+ * Function irlmp_discovery_expiry (expiry)
+ *
+ *	This device is no longer been discovered, and therefore it is being
+ *	purged from the discovery log. Inform all clients who have
+ *	registered for this event...
+ *
+ *	Note : called exclusively from discovery.c
+ *	Note : this is no longer called under discovery spinlock, so the
+ *		client can do whatever he wants in the callback.
+ */
+void irlmp_discovery_expiry(discinfo_t *expiries, int number)
+{
+	irlmp_client_t *client;
+	irlmp_client_t *client_next;
+	int		i;
+
+	IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(expiries != NULL, return;);
+
+	/* For each client - notify callback may touch client list */
+	client = (irlmp_client_t *) hashbin_get_first(irlmp->clients);
+	while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL,
+					 (void *) &client_next) ) {
+
+		/* Pass all entries to the listener */
+		for(i = 0; i < number; i++) {
+			/* Check if we should notify client */
+			if ((client->expir_callback) &&
+			    (client->hint_mask.word & u16ho(expiries[i].hints)
+			     & 0x7f7f) )
+				client->expir_callback(&(expiries[i]),
+						       EXPIRY_TIMEOUT,
+						       client->priv);
+		}
+
+		/* Next client */
+		client = client_next;
+	}
+}
+
+/*
+ * Function irlmp_get_discovery_response ()
+ *
+ *    Used by IrLAP to get the discovery info it needs when answering
+ *    discovery requests by other devices.
+ */
+discovery_t *irlmp_get_discovery_response(void)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(irlmp != NULL, return NULL;);
+
+	u16ho(irlmp->discovery_rsp.data.hints) = irlmp->hints.word;
+
+	/*
+	 *  Set character set for device name (we use ASCII), and
+	 *  copy device name. Remember to make room for a \0 at the
+	 *  end
+	 */
+	irlmp->discovery_rsp.data.charset = CS_ASCII;
+
+	strncpy(irlmp->discovery_rsp.data.info, sysctl_devname,
+		NICKNAME_MAX_LEN);
+	irlmp->discovery_rsp.name_len = strlen(irlmp->discovery_rsp.data.info);
+
+	return &irlmp->discovery_rsp;
+}
+
+/*
+ * Function irlmp_data_request (self, skb)
+ *
+ *    Send some data to peer device
+ *
+ * Note on skb management :
+ * After calling the lower layers of the IrDA stack, we always
+ * kfree() the skb, which drop the reference count (and potentially
+ * destroy it).
+ * IrLMP and IrLAP may queue the packet, and in those cases will need
+ * to use skb_get() to keep it around.
+ * Jean II
+ */
+int irlmp_data_request(struct lsap_cb *self, struct sk_buff *userdata)
+{
+	int	ret;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+	/* Make room for MUX header */
+	IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;);
+	skb_push(userdata, LMP_HEADER);
+
+	ret = irlmp_do_lsap_event(self, LM_DATA_REQUEST, userdata);
+
+	/* Drop reference count - see irlap_data_request(). */
+	dev_kfree_skb(userdata);
+
+	return ret;
+}
+EXPORT_SYMBOL(irlmp_data_request);
+
+/*
+ * Function irlmp_data_indication (handle, skb)
+ *
+ *    Got data from LAP layer so pass it up to upper layer
+ *
+ */
+void irlmp_data_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+	/* Hide LMP header from layer above */
+	skb_pull(skb, LMP_HEADER);
+
+	if (self->notify.data_indication) {
+		/* Don't forget to refcount it - see irlap_driver_rcv(). */
+		skb_get(skb);
+		self->notify.data_indication(self->notify.instance, self, skb);
+	}
+}
+
+/*
+ * Function irlmp_udata_request (self, skb)
+ */
+int irlmp_udata_request(struct lsap_cb *self, struct sk_buff *userdata)
+{
+	int	ret;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(userdata != NULL, return -1;);
+
+	/* Make room for MUX header */
+	IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;);
+	skb_push(userdata, LMP_HEADER);
+
+	ret = irlmp_do_lsap_event(self, LM_UDATA_REQUEST, userdata);
+
+	/* Drop reference count - see irlap_data_request(). */
+	dev_kfree_skb(userdata);
+
+	return ret;
+}
+
+/*
+ * Function irlmp_udata_indication (self, skb)
+ *
+ *    Send unreliable data (but still within the connection)
+ *
+ */
+void irlmp_udata_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/* Hide LMP header from layer above */
+	skb_pull(skb, LMP_HEADER);
+
+	if (self->notify.udata_indication) {
+		/* Don't forget to refcount it - see irlap_driver_rcv(). */
+		skb_get(skb);
+		self->notify.udata_indication(self->notify.instance, self,
+					      skb);
+	}
+}
+
+/*
+ * Function irlmp_connless_data_request (self, skb)
+ */
+#ifdef CONFIG_IRDA_ULTRA
+int irlmp_connless_data_request(struct lsap_cb *self, struct sk_buff *userdata,
+				__u8 pid)
+{
+	struct sk_buff *clone_skb;
+	struct lap_cb *lap;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(userdata != NULL, return -1;);
+
+	/* Make room for MUX and PID header */
+	IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER+LMP_PID_HEADER,
+		    return -1;);
+
+	/* Insert protocol identifier */
+	skb_push(userdata, LMP_PID_HEADER);
+	if(self != NULL)
+	  userdata->data[0] = self->pid;
+	else
+	  userdata->data[0] = pid;
+
+	/* Connectionless sockets must use 0x70 */
+	skb_push(userdata, LMP_HEADER);
+	userdata->data[0] = userdata->data[1] = LSAP_CONNLESS;
+
+	/* Try to send Connectionless  packets out on all links */
+	lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+	while (lap != NULL) {
+		IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return -1;);
+
+		clone_skb = skb_clone(userdata, GFP_ATOMIC);
+		if (!clone_skb) {
+			dev_kfree_skb(userdata);
+			return -ENOMEM;
+		}
+
+		irlap_unitdata_request(lap->irlap, clone_skb);
+		/* irlap_unitdata_request() don't increase refcount,
+		 * so no dev_kfree_skb() - Jean II */
+
+		lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+	}
+	dev_kfree_skb(userdata);
+
+	return 0;
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlmp_connless_data_indication (self, skb)
+ *
+ *    Receive unreliable data outside any connection. Mostly used by Ultra
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlmp_connless_data_indication(struct lsap_cb *self, struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/* Hide LMP and PID header from layer above */
+	skb_pull(skb, LMP_HEADER+LMP_PID_HEADER);
+
+	if (self->notify.udata_indication) {
+		/* Don't forget to refcount it - see irlap_driver_rcv(). */
+		skb_get(skb);
+		self->notify.udata_indication(self->notify.instance, self,
+					      skb);
+	}
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Propagate status indication from LAP to LSAPs (via LMP)
+ * This don't trigger any change of state in lap_cb, lmp_cb or lsap_cb,
+ * and the event is stateless, therefore we can bypass both state machines
+ * and send the event direct to the LSAP user.
+ * Jean II
+ */
+void irlmp_status_indication(struct lap_cb *self,
+			     LINK_STATUS link, LOCK_STATUS lock)
+{
+	struct lsap_cb *next;
+	struct lsap_cb *curr;
+
+	/* Send status_indication to all LSAPs using this link */
+	curr = (struct lsap_cb *) hashbin_get_first( self->lsaps);
+	while (NULL != hashbin_find_next(self->lsaps, (long) curr, NULL,
+					 (void *) &next) ) {
+		IRDA_ASSERT(curr->magic == LMP_LSAP_MAGIC, return;);
+		/*
+		 *  Inform service user if he has requested it
+		 */
+		if (curr->notify.status_indication != NULL)
+			curr->notify.status_indication(curr->notify.instance,
+						       link, lock);
+		else
+			IRDA_DEBUG(2, "%s(), no handler\n", __FUNCTION__);
+
+		curr = next;
+	}
+}
+
+/*
+ * Receive flow control indication from LAP.
+ * LAP want us to send it one more frame. We implement a simple round
+ * robin scheduler between the active sockets so that we get a bit of
+ * fairness. Note that the round robin is far from perfect, but it's
+ * better than nothing.
+ * We then poll the selected socket so that we can do synchronous
+ * refilling of IrLAP (which allow to minimise the number of buffers).
+ * Jean II
+ */
+void irlmp_flow_indication(struct lap_cb *self, LOCAL_FLOW flow)
+{
+	struct lsap_cb *next;
+	struct lsap_cb *curr;
+	int	lsap_todo;
+
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+	IRDA_ASSERT(flow == FLOW_START, return;);
+
+	/* Get the number of lsap. That's the only safe way to know
+	 * that we have looped around... - Jean II */
+	lsap_todo = HASHBIN_GET_SIZE(self->lsaps);
+	IRDA_DEBUG(4, "%s() : %d lsaps to scan\n", __FUNCTION__, lsap_todo);
+
+	/* Poll lsap in order until the queue is full or until we
+	 * tried them all.
+	 * Most often, the current LSAP will have something to send,
+	 * so we will go through this loop only once. - Jean II */
+	while((lsap_todo--) &&
+	      (IRLAP_GET_TX_QUEUE_LEN(self->irlap) < LAP_HIGH_THRESHOLD)) {
+		/* Try to find the next lsap we should poll. */
+		next = self->flow_next;
+		/* If we have no lsap, restart from first one */
+		if(next == NULL)
+			next = (struct lsap_cb *) hashbin_get_first(self->lsaps);
+		/* Verify current one and find the next one */
+		curr = hashbin_find_next(self->lsaps, (long) next, NULL,
+					 (void *) &self->flow_next);
+		/* Uh-oh... Paranoia */
+		if(curr == NULL)
+			break;
+		IRDA_DEBUG(4, "%s() : curr is %p, next was %p and is now %p, still %d to go - queue len = %d\n", __FUNCTION__, curr, next, self->flow_next, lsap_todo, IRLAP_GET_TX_QUEUE_LEN(self->irlap));
+
+		/* Inform lsap user that it can send one more packet. */
+		if (curr->notify.flow_indication != NULL)
+			curr->notify.flow_indication(curr->notify.instance,
+						     curr, flow);
+		else
+			IRDA_DEBUG(1, "%s(), no handler\n", __FUNCTION__);
+	}
+}
+
+#if 0
+/*
+ * Function irlmp_hint_to_service (hint)
+ *
+ *    Returns a list of all servics contained in the given hint bits. This
+ *    function assumes that the hint bits have the size of two bytes only
+ */
+__u8 *irlmp_hint_to_service(__u8 *hint)
+{
+	__u8 *service;
+	int i = 0;
+
+	/*
+	 * Allocate array to store services in. 16 entries should be safe
+	 * since we currently only support 2 hint bytes
+	 */
+	service = kmalloc(16, GFP_ATOMIC);
+	if (!service) {
+		IRDA_DEBUG(1, "%s(), Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+
+	if (!hint[0]) {
+		IRDA_DEBUG(1, "<None>\n");
+		kfree(service);
+		return NULL;
+	}
+	if (hint[0] & HINT_PNP)
+		IRDA_DEBUG(1, "PnP Compatible ");
+	if (hint[0] & HINT_PDA)
+		IRDA_DEBUG(1, "PDA/Palmtop ");
+	if (hint[0] & HINT_COMPUTER)
+		IRDA_DEBUG(1, "Computer ");
+	if (hint[0] & HINT_PRINTER) {
+		IRDA_DEBUG(1, "Printer ");
+		service[i++] = S_PRINTER;
+	}
+	if (hint[0] & HINT_MODEM)
+		IRDA_DEBUG(1, "Modem ");
+	if (hint[0] & HINT_FAX)
+		IRDA_DEBUG(1, "Fax ");
+	if (hint[0] & HINT_LAN) {
+		IRDA_DEBUG(1, "LAN Access ");
+		service[i++] = S_LAN;
+	}
+	/*
+	 *  Test if extension byte exists. This byte will usually be
+	 *  there, but this is not really required by the standard.
+	 *  (IrLMP p. 29)
+	 */
+	if (hint[0] & HINT_EXTENSION) {
+		if (hint[1] & HINT_TELEPHONY) {
+			IRDA_DEBUG(1, "Telephony ");
+			service[i++] = S_TELEPHONY;
+		} if (hint[1] & HINT_FILE_SERVER)
+			IRDA_DEBUG(1, "File Server ");
+
+		if (hint[1] & HINT_COMM) {
+			IRDA_DEBUG(1, "IrCOMM ");
+			service[i++] = S_COMM;
+		}
+		if (hint[1] & HINT_OBEX) {
+			IRDA_DEBUG(1, "IrOBEX ");
+			service[i++] = S_OBEX;
+		}
+	}
+	IRDA_DEBUG(1, "\n");
+
+	/* So that client can be notified about any discovery */
+	service[i++] = S_ANY;
+
+	service[i] = S_END;
+
+	return service;
+}
+#endif
+
+static const __u16 service_hint_mapping[S_END][2] = {
+	{ HINT_PNP,		0 },			/* S_PNP */
+	{ HINT_PDA,		0 },			/* S_PDA */
+	{ HINT_COMPUTER,	0 },			/* S_COMPUTER */
+	{ HINT_PRINTER,		0 },			/* S_PRINTER */
+	{ HINT_MODEM,		0 },			/* S_MODEM */
+	{ HINT_FAX,		0 },			/* S_FAX */
+	{ HINT_LAN,		0 },			/* S_LAN */
+	{ HINT_EXTENSION,	HINT_TELEPHONY },	/* S_TELEPHONY */
+	{ HINT_EXTENSION,	HINT_COMM },		/* S_COMM */
+	{ HINT_EXTENSION,	HINT_OBEX },		/* S_OBEX */
+	{ 0xFF,			0xFF },			/* S_ANY */
+};
+
+/*
+ * Function irlmp_service_to_hint (service)
+ *
+ *    Converts a service type, to a hint bit
+ *
+ *    Returns: a 16 bit hint value, with the service bit set
+ */
+__u16 irlmp_service_to_hint(int service)
+{
+	__u16_host_order hint;
+
+	hint.byte[0] = service_hint_mapping[service][0];
+	hint.byte[1] = service_hint_mapping[service][1];
+
+	return hint.word;
+}
+EXPORT_SYMBOL(irlmp_service_to_hint);
+
+/*
+ * Function irlmp_register_service (service)
+ *
+ *    Register local service with IrLMP
+ *
+ */
+void *irlmp_register_service(__u16 hints)
+{
+	irlmp_service_t *service;
+
+	IRDA_DEBUG(4, "%s(), hints = %04x\n", __FUNCTION__, hints);
+
+	/* Make a new registration */
+	service = kmalloc(sizeof(irlmp_service_t), GFP_ATOMIC);
+	if (!service) {
+		IRDA_DEBUG(1, "%s(), Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+	service->hints.word = hints;
+	hashbin_insert(irlmp->services, (irda_queue_t *) service,
+		       (long) service, NULL);
+
+	irlmp->hints.word |= hints;
+
+	return (void *)service;
+}
+EXPORT_SYMBOL(irlmp_register_service);
+
+/*
+ * Function irlmp_unregister_service (handle)
+ *
+ *    Unregister service with IrLMP.
+ *
+ *    Returns: 0 on success, -1 on error
+ */
+int irlmp_unregister_service(void *handle)
+{
+	irlmp_service_t *service;
+	unsigned long flags;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	if (!handle)
+		return -1;
+
+	/* Caller may call with invalid handle (it's legal) - Jean II */
+	service = hashbin_lock_find(irlmp->services, (long) handle, NULL);
+	if (!service) {
+		IRDA_DEBUG(1, "%s(), Unknown service!\n", __FUNCTION__);
+		return -1;
+	}
+
+	hashbin_remove_this(irlmp->services, (irda_queue_t *) service);
+	kfree(service);
+
+	/* Remove old hint bits */
+	irlmp->hints.word = 0;
+
+	/* Refresh current hint bits */
+	spin_lock_irqsave(&irlmp->services->hb_spinlock, flags);
+        service = (irlmp_service_t *) hashbin_get_first(irlmp->services);
+        while (service) {
+		irlmp->hints.word |= service->hints.word;
+
+                service = (irlmp_service_t *)hashbin_get_next(irlmp->services);
+        }
+	spin_unlock_irqrestore(&irlmp->services->hb_spinlock, flags);
+	return 0;
+}
+EXPORT_SYMBOL(irlmp_unregister_service);
+
+/*
+ * Function irlmp_register_client (hint_mask, callback1, callback2)
+ *
+ *    Register a local client with IrLMP
+ *	First callback is selective discovery (based on hints)
+ *	Second callback is for selective discovery expiries
+ *
+ *    Returns: handle > 0 on success, 0 on error
+ */
+void *irlmp_register_client(__u16 hint_mask, DISCOVERY_CALLBACK1 disco_clb,
+			    DISCOVERY_CALLBACK2 expir_clb, void *priv)
+{
+	irlmp_client_t *client;
+
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+	IRDA_ASSERT(irlmp != NULL, return NULL;);
+
+	/* Make a new registration */
+	client = kmalloc(sizeof(irlmp_client_t), GFP_ATOMIC);
+	if (!client) {
+		IRDA_DEBUG( 1, "%s(), Unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+
+	/* Register the details */
+	client->hint_mask.word = hint_mask;
+	client->disco_callback = disco_clb;
+	client->expir_callback = expir_clb;
+	client->priv = priv;
+
+	hashbin_insert(irlmp->clients, (irda_queue_t *) client,
+		       (long) client, NULL);
+
+	return (void *) client;
+}
+EXPORT_SYMBOL(irlmp_register_client);
+
+/*
+ * Function irlmp_update_client (handle, hint_mask, callback1, callback2)
+ *
+ *    Updates specified client (handle) with possibly new hint_mask and
+ *    callback
+ *
+ *    Returns: 0 on success, -1 on error
+ */
+int irlmp_update_client(void *handle, __u16 hint_mask,
+			DISCOVERY_CALLBACK1 disco_clb,
+			DISCOVERY_CALLBACK2 expir_clb, void *priv)
+{
+	irlmp_client_t *client;
+
+	if (!handle)
+		return -1;
+
+	client = hashbin_lock_find(irlmp->clients, (long) handle, NULL);
+	if (!client) {
+		IRDA_DEBUG(1, "%s(), Unknown client!\n", __FUNCTION__);
+		return -1;
+	}
+
+	client->hint_mask.word = hint_mask;
+	client->disco_callback = disco_clb;
+	client->expir_callback = expir_clb;
+	client->priv = priv;
+
+	return 0;
+}
+EXPORT_SYMBOL(irlmp_update_client);
+
+/*
+ * Function irlmp_unregister_client (handle)
+ *
+ *    Returns: 0 on success, -1 on error
+ *
+ */
+int irlmp_unregister_client(void *handle)
+{
+	struct irlmp_client *client;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	if (!handle)
+		return -1;
+
+	/* Caller may call with invalid handle (it's legal) - Jean II */
+	client = hashbin_lock_find(irlmp->clients, (long) handle, NULL);
+	if (!client) {
+		IRDA_DEBUG(1, "%s(), Unknown client!\n", __FUNCTION__);
+		return -1;
+	}
+
+	IRDA_DEBUG(4, "%s(), removing client!\n", __FUNCTION__);
+	hashbin_remove_this(irlmp->clients, (irda_queue_t *) client);
+	kfree(client);
+
+	return 0;
+}
+EXPORT_SYMBOL(irlmp_unregister_client);
+
+/*
+ * Function irlmp_slsap_inuse (slsap)
+ *
+ *    Check if the given source LSAP selector is in use
+ *
+ * This function is clearly not very efficient. On the mitigating side, the
+ * stack make sure that in 99% of the cases, we are called only once
+ * for each socket allocation. We could probably keep a bitmap
+ * of the allocated LSAP, but I'm not sure the complexity is worth it.
+ * Jean II
+ */
+static int irlmp_slsap_inuse(__u8 slsap_sel)
+{
+	struct lsap_cb *self;
+	struct lap_cb *lap;
+	unsigned long flags;
+
+	IRDA_ASSERT(irlmp != NULL, return TRUE;);
+	IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return TRUE;);
+	IRDA_ASSERT(slsap_sel != LSAP_ANY, return TRUE;);
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+#ifdef CONFIG_IRDA_ULTRA
+	/* Accept all bindings to the connectionless LSAP */
+	if (slsap_sel == LSAP_CONNLESS)
+		return FALSE;
+#endif /* CONFIG_IRDA_ULTRA */
+
+	/* Valid values are between 0 and 127 (0x0-0x6F) */
+	if (slsap_sel > LSAP_MAX)
+		return TRUE;
+
+	/*
+	 *  Check if slsap is already in use. To do this we have to loop over
+	 *  every IrLAP connection and check every LSAP associated with each
+	 *  the connection.
+	 */
+	spin_lock_irqsave(&irlmp->links->hb_spinlock, flags);
+	lap = (struct lap_cb *) hashbin_get_first(irlmp->links);
+	while (lap != NULL) {
+		IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, goto errlap;);
+
+		/* Careful for priority inversions here !
+		 * irlmp->links is never taken while another IrDA
+		 * spinlock is held, so we are safe. Jean II */
+		spin_lock(&lap->lsaps->hb_spinlock);
+
+		/* For this IrLAP, check all the LSAPs */
+		self = (struct lsap_cb *) hashbin_get_first(lap->lsaps);
+		while (self != NULL) {
+			IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC,
+				    goto errlsap;);
+
+			if ((self->slsap_sel == slsap_sel)) {
+				IRDA_DEBUG(4, "Source LSAP selector=%02x in use\n",
+					   self->slsap_sel);
+				goto errlsap;
+			}
+			self = (struct lsap_cb*) hashbin_get_next(lap->lsaps);
+		}
+		spin_unlock(&lap->lsaps->hb_spinlock);
+
+		/* Next LAP */
+		lap = (struct lap_cb *) hashbin_get_next(irlmp->links);
+	}
+	spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags);
+
+	/*
+	 * Server sockets are typically waiting for connections and
+	 * therefore reside in the unconnected list. We don't want
+	 * to give out their LSAPs for obvious reasons...
+	 * Jean II
+	 */
+	spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+	self = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps);
+	while (self != NULL) {
+		IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, goto erruncon;);
+		if ((self->slsap_sel == slsap_sel)) {
+			IRDA_DEBUG(4, "Source LSAP selector=%02x in use (unconnected)\n",
+				   self->slsap_sel);
+			goto erruncon;
+		}
+		self = (struct lsap_cb*) hashbin_get_next(irlmp->unconnected_lsaps);
+	}
+	spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+	return FALSE;
+
+	/* Error exit from within one of the two nested loops.
+	 * Make sure we release the right spinlock in the righ order.
+	 * Jean II */
+errlsap:
+	spin_unlock(&lap->lsaps->hb_spinlock);
+IRDA_ASSERT_LABEL(errlap:)
+	spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags);
+	return TRUE;
+
+	/* Error exit from within the unconnected loop.
+	 * Just one spinlock to release... Jean II */
+erruncon:
+	spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+	return TRUE;
+}
+
+/*
+ * Function irlmp_find_free_slsap ()
+ *
+ *    Find a free source LSAP to use. This function is called if the service
+ *    user has requested a source LSAP equal to LM_ANY
+ */
+static __u8 irlmp_find_free_slsap(void)
+{
+	__u8 lsap_sel;
+	int wrapped = 0;
+
+	IRDA_ASSERT(irlmp != NULL, return -1;);
+	IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return -1;);
+
+	/* Most users don't really care which LSAPs they are given,
+	 * and therefore we automatically give them a free LSAP.
+	 * This function try to find a suitable LSAP, i.e. which is
+	 * not in use and is within the acceptable range. Jean II */
+
+	do {
+		/* Always increment to LSAP number before using it.
+		 * In theory, we could reuse the last LSAP number, as long
+		 * as it is no longer in use. Some IrDA stack do that.
+		 * However, the previous socket may be half closed, i.e.
+		 * we closed it, we think it's no longer in use, but the
+		 * other side did not receive our close and think it's
+		 * active and still send data on it.
+		 * This is similar to what is done with PIDs and TCP ports.
+		 * Also, this reduce the number of calls to irlmp_slsap_inuse()
+		 * which is an expensive function to call.
+		 * Jean II */
+		irlmp->last_lsap_sel++;
+
+		/* Check if we need to wraparound (0x70-0x7f are reserved) */
+		if (irlmp->last_lsap_sel > LSAP_MAX) {
+			/* 0x00-0x10 are also reserved for well know ports */
+			irlmp->last_lsap_sel = 0x10;
+
+			/* Make sure we terminate the loop */
+			if (wrapped++) {
+				IRDA_ERROR("%s: no more free LSAPs !\n",
+					   __FUNCTION__);
+				return 0;
+			}
+		}
+
+		/* If the LSAP is in use, try the next one.
+		 * Despite the autoincrement, we need to check if the lsap
+		 * is really in use or not, first because LSAP may be
+		 * directly allocated in irlmp_open_lsap(), and also because
+		 * we may wraparound on old sockets. Jean II */
+	} while (irlmp_slsap_inuse(irlmp->last_lsap_sel));
+
+	/* Got it ! */
+	lsap_sel = irlmp->last_lsap_sel;
+	IRDA_DEBUG(4, "%s(), found free lsap_sel=%02x\n",
+		   __FUNCTION__, lsap_sel);
+
+	return lsap_sel;
+}
+
+/*
+ * Function irlmp_convert_lap_reason (lap_reason)
+ *
+ *    Converts IrLAP disconnect reason codes to IrLMP disconnect reason
+ *    codes
+ *
+ */
+LM_REASON irlmp_convert_lap_reason( LAP_REASON lap_reason)
+{
+	int reason = LM_LAP_DISCONNECT;
+
+	switch (lap_reason) {
+	case LAP_DISC_INDICATION: /* Received a disconnect request from peer */
+		IRDA_DEBUG( 1, "%s(), LAP_DISC_INDICATION\n", __FUNCTION__);
+		reason = LM_USER_REQUEST;
+		break;
+	case LAP_NO_RESPONSE:    /* To many retransmits without response */
+		IRDA_DEBUG( 1, "%s(), LAP_NO_RESPONSE\n", __FUNCTION__);
+		reason = LM_LAP_DISCONNECT;
+		break;
+	case LAP_RESET_INDICATION:
+		IRDA_DEBUG( 1, "%s(), LAP_RESET_INDICATION\n", __FUNCTION__);
+		reason = LM_LAP_RESET;
+		break;
+	case LAP_FOUND_NONE:
+	case LAP_MEDIA_BUSY:
+	case LAP_PRIMARY_CONFLICT:
+		IRDA_DEBUG(1, "%s(), LAP_FOUND_NONE, LAP_MEDIA_BUSY or LAP_PRIMARY_CONFLICT\n", __FUNCTION__);
+		reason = LM_CONNECT_FAILURE;
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknow IrLAP disconnect reason %d!\n",
+			   __FUNCTION__, lap_reason);
+		reason = LM_LAP_DISCONNECT;
+		break;
+	}
+
+	return reason;
+}
+
+#ifdef CONFIG_PROC_FS
+
+struct irlmp_iter_state {
+	hashbin_t *hashbin;
+};
+
+#define LSAP_START_TOKEN	((void *)1)
+#define LINK_START_TOKEN	((void *)2)
+
+static void *irlmp_seq_hb_idx(struct irlmp_iter_state *iter, loff_t *off)
+{
+	void *element;
+
+	spin_lock_irq(&iter->hashbin->hb_spinlock);
+	for (element = hashbin_get_first(iter->hashbin);
+	     element != NULL; 
+	     element = hashbin_get_next(iter->hashbin)) {
+		if (!off || *off-- == 0) {
+			/* NB: hashbin left locked */
+			return element;
+		}
+	}
+	spin_unlock_irq(&iter->hashbin->hb_spinlock);
+	iter->hashbin = NULL;
+	return NULL;
+}
+
+
+static void *irlmp_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct irlmp_iter_state *iter = seq->private;
+	void *v;
+	loff_t off = *pos;
+
+	iter->hashbin = NULL;
+	if (off-- == 0)
+		return LSAP_START_TOKEN;
+
+	iter->hashbin = irlmp->unconnected_lsaps;
+	v = irlmp_seq_hb_idx(iter, &off);
+	if (v)
+		return v;
+
+	if (off-- == 0)
+		return LINK_START_TOKEN;
+
+	iter->hashbin = irlmp->links;
+	return irlmp_seq_hb_idx(iter, &off);
+}
+
+static void *irlmp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct irlmp_iter_state *iter = seq->private;
+
+	++*pos;
+
+	if (v == LSAP_START_TOKEN) {		/* start of list of lsaps */
+		iter->hashbin = irlmp->unconnected_lsaps;
+		v = irlmp_seq_hb_idx(iter, NULL);
+		return v ? v : LINK_START_TOKEN;
+	}
+
+	if (v == LINK_START_TOKEN) {		/* start of list of links */
+		iter->hashbin = irlmp->links;
+		return irlmp_seq_hb_idx(iter, NULL);
+	}
+
+	v = hashbin_get_next(iter->hashbin);
+
+	if (v == NULL) {			/* no more in this hash bin */
+		spin_unlock_irq(&iter->hashbin->hb_spinlock);
+
+		if (iter->hashbin == irlmp->unconnected_lsaps) 
+			v =  LINK_START_TOKEN;
+
+		iter->hashbin = NULL;
+	}
+	return v;
+}
+
+static void irlmp_seq_stop(struct seq_file *seq, void *v)
+{
+	struct irlmp_iter_state *iter = seq->private;
+
+	if (iter->hashbin)
+		spin_unlock_irq(&iter->hashbin->hb_spinlock);
+}
+
+static int irlmp_seq_show(struct seq_file *seq, void *v)
+{
+	const struct irlmp_iter_state *iter = seq->private;
+	struct lsap_cb *self = v;
+
+	if (v == LSAP_START_TOKEN)
+		seq_puts(seq, "Unconnected LSAPs:\n");
+	else if (v == LINK_START_TOKEN)
+		seq_puts(seq, "\nRegistered Link Layers:\n");
+	else if (iter->hashbin == irlmp->unconnected_lsaps) {
+		self = v;
+		IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EINVAL; );
+		seq_printf(seq, "lsap state: %s, ",
+			   irlsap_state[ self->lsap_state]);
+		seq_printf(seq,
+			   "slsap_sel: %#02x, dlsap_sel: %#02x, ",
+			   self->slsap_sel, self->dlsap_sel);
+		seq_printf(seq, "(%s)", self->notify.name);
+		seq_printf(seq, "\n");
+	} else if (iter->hashbin == irlmp->links) {
+		struct lap_cb *lap = v;
+
+		seq_printf(seq, "lap state: %s, ",
+			   irlmp_state[lap->lap_state]);
+
+		seq_printf(seq, "saddr: %#08x, daddr: %#08x, ",
+			   lap->saddr, lap->daddr);
+		seq_printf(seq, "num lsaps: %d",
+			   HASHBIN_GET_SIZE(lap->lsaps));
+		seq_printf(seq, "\n");
+
+		/* Careful for priority inversions here !
+		 * All other uses of attrib spinlock are independent of
+		 * the object spinlock, so we are safe. Jean II */
+		spin_lock(&lap->lsaps->hb_spinlock);
+
+		seq_printf(seq, "\n  Connected LSAPs:\n");
+		for (self = (struct lsap_cb *) hashbin_get_first(lap->lsaps);
+		     self != NULL;
+		     self = (struct lsap_cb *)hashbin_get_next(lap->lsaps)) {
+			IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC,
+				    goto outloop;);
+			seq_printf(seq, "  lsap state: %s, ",
+				   irlsap_state[ self->lsap_state]);
+			seq_printf(seq,
+				   "slsap_sel: %#02x, dlsap_sel: %#02x, ",
+				   self->slsap_sel, self->dlsap_sel);
+			seq_printf(seq, "(%s)", self->notify.name);
+			seq_putc(seq, '\n');
+
+		}
+	IRDA_ASSERT_LABEL(outloop:)
+		spin_unlock(&lap->lsaps->hb_spinlock);
+		seq_putc(seq, '\n');
+	} else
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct seq_operations irlmp_seq_ops = {
+	.start  = irlmp_seq_start,
+	.next   = irlmp_seq_next,
+	.stop   = irlmp_seq_stop,
+	.show   = irlmp_seq_show,
+};
+
+static int irlmp_seq_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *seq;
+	int rc = -ENOMEM;
+	struct irlmp_iter_state *s;
+
+	IRDA_ASSERT(irlmp != NULL, return -EINVAL;);
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (!s)
+		goto out;
+
+	rc = seq_open(file, &irlmp_seq_ops);
+	if (rc)
+		goto out_kfree;
+
+	seq	     = file->private_data;
+	seq->private = s;
+out:
+	return rc;
+out_kfree:
+	kfree(s);
+	goto out;
+}
+
+struct file_operations irlmp_seq_fops = {
+	.owner		= THIS_MODULE,
+	.open           = irlmp_seq_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release	= seq_release_private,
+};
+
+#endif /* PROC_FS */
diff --git a/net/irda/irlmp_event.c b/net/irda/irlmp_event.c
new file mode 100644
index 00000000000..26649f6528e
--- /dev/null
+++ b/net/irda/irlmp_event.c
@@ -0,0 +1,912 @@
+/*********************************************************************
+ *
+ * Filename:      irlmp_event.c
+ * Version:       0.8
+ * Description:   An IrDA LMP event driver for Linux
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Tue Dec 14 23:04:16 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/timer.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+#include <net/irda/irlmp_event.h>
+
+const char *irlmp_state[] = {
+	"LAP_STANDBY",
+	"LAP_U_CONNECT",
+	"LAP_ACTIVE",
+};
+
+const char *irlsap_state[] = {
+	"LSAP_DISCONNECTED",
+	"LSAP_CONNECT",
+	"LSAP_CONNECT_PEND",
+	"LSAP_DATA_TRANSFER_READY",
+	"LSAP_SETUP",
+	"LSAP_SETUP_PEND",
+};
+
+#ifdef CONFIG_IRDA_DEBUG
+static const char *irlmp_event[] = {
+	"LM_CONNECT_REQUEST",
+	"LM_CONNECT_CONFIRM",
+	"LM_CONNECT_RESPONSE",
+	"LM_CONNECT_INDICATION",
+
+	"LM_DISCONNECT_INDICATION",
+	"LM_DISCONNECT_REQUEST",
+
+	"LM_DATA_REQUEST",
+	"LM_UDATA_REQUEST",
+	"LM_DATA_INDICATION",
+	"LM_UDATA_INDICATION",
+
+	"LM_WATCHDOG_TIMEOUT",
+
+	/* IrLAP events */
+	"LM_LAP_CONNECT_REQUEST",
+	"LM_LAP_CONNECT_INDICATION",
+	"LM_LAP_CONNECT_CONFIRM",
+	"LM_LAP_DISCONNECT_INDICATION",
+	"LM_LAP_DISCONNECT_REQUEST",
+	"LM_LAP_DISCOVERY_REQUEST",
+	"LM_LAP_DISCOVERY_CONFIRM",
+	"LM_LAP_IDLE_TIMEOUT",
+};
+#endif	/* CONFIG_IRDA_DEBUG */
+
+/* LAP Connection control proto declarations */
+static void irlmp_state_standby  (struct lap_cb *, IRLMP_EVENT,
+				  struct sk_buff *);
+static void irlmp_state_u_connect(struct lap_cb *, IRLMP_EVENT,
+				  struct sk_buff *);
+static void irlmp_state_active   (struct lap_cb *, IRLMP_EVENT,
+				  struct sk_buff *);
+
+/* LSAP Connection control proto declarations */
+static int irlmp_state_disconnected(struct lsap_cb *, IRLMP_EVENT,
+				    struct sk_buff *);
+static int irlmp_state_connect     (struct lsap_cb *, IRLMP_EVENT,
+				    struct sk_buff *);
+static int irlmp_state_connect_pend(struct lsap_cb *, IRLMP_EVENT,
+				    struct sk_buff *);
+static int irlmp_state_dtr         (struct lsap_cb *, IRLMP_EVENT,
+				    struct sk_buff *);
+static int irlmp_state_setup       (struct lsap_cb *, IRLMP_EVENT,
+				    struct sk_buff *);
+static int irlmp_state_setup_pend  (struct lsap_cb *, IRLMP_EVENT,
+				    struct sk_buff *);
+
+static void (*lap_state[]) (struct lap_cb *, IRLMP_EVENT, struct sk_buff *) =
+{
+	irlmp_state_standby,
+	irlmp_state_u_connect,
+	irlmp_state_active,
+};
+
+static int (*lsap_state[])( struct lsap_cb *, IRLMP_EVENT, struct sk_buff *) =
+{
+	irlmp_state_disconnected,
+	irlmp_state_connect,
+	irlmp_state_connect_pend,
+	irlmp_state_dtr,
+	irlmp_state_setup,
+	irlmp_state_setup_pend
+};
+
+static inline void irlmp_next_lap_state(struct lap_cb *self,
+					IRLMP_STATE state)
+{
+	/*
+	IRDA_DEBUG(4, "%s(), LMP LAP = %s\n", __FUNCTION__, irlmp_state[state]);
+	*/
+	self->lap_state = state;
+}
+
+static inline void irlmp_next_lsap_state(struct lsap_cb *self,
+					 LSAP_STATE state)
+{
+	/*
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_DEBUG(4, "%s(), LMP LSAP = %s\n", __FUNCTION__, irlsap_state[state]);
+	*/
+	self->lsap_state = state;
+}
+
+/* Do connection control events */
+int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event,
+			struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+	IRDA_DEBUG(4, "%s(), EVENT = %s, STATE = %s\n",
+		__FUNCTION__, irlmp_event[event], irlsap_state[ self->lsap_state]);
+
+	return (*lsap_state[self->lsap_state]) (self, event, skb);
+}
+
+/*
+ * Function do_lap_event (event, skb, info)
+ *
+ *    Do IrLAP control events
+ *
+ */
+void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event,
+			struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+	IRDA_DEBUG(4, "%s(), EVENT = %s, STATE = %s\n", __FUNCTION__,
+		   irlmp_event[event],
+		   irlmp_state[self->lap_state]);
+
+	(*lap_state[self->lap_state]) (self, event, skb);
+}
+
+void irlmp_discovery_timer_expired(void *data)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/* We always cleanup the log (active & passive discovery) */
+	irlmp_do_expiry();
+
+	/* Active discovery is conditional */
+	if (sysctl_discovery)
+		irlmp_do_discovery(sysctl_discovery_slots);
+
+	/* Restart timer */
+	irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout * HZ);
+}
+
+void irlmp_watchdog_timer_expired(void *data)
+{
+	struct lsap_cb *self = (struct lsap_cb *) data;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;);
+
+	irlmp_do_lsap_event(self, LM_WATCHDOG_TIMEOUT, NULL);
+}
+
+void irlmp_idle_timer_expired(void *data)
+{
+	struct lap_cb *self = (struct lap_cb *) data;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+	irlmp_do_lap_event(self, LM_LAP_IDLE_TIMEOUT, NULL);
+}
+
+/*
+ * Send an event on all LSAPs attached to this LAP.
+ */
+static inline void
+irlmp_do_all_lsap_event(hashbin_t *	lsap_hashbin,
+			IRLMP_EVENT	event)
+{
+	struct lsap_cb *lsap;
+	struct lsap_cb *lsap_next;
+
+	/* Note : this function use the new hashbin_find_next()
+	 * function, instead of the old hashbin_get_next().
+	 * This make sure that we are always pointing one lsap
+	 * ahead, so that if the current lsap is removed as the
+	 * result of sending the event, we don't care.
+	 * Also, as we store the context ourselves, if an enumeration
+	 * of the same lsap hashbin happens as the result of sending the
+	 * event, we don't care.
+	 * The only problem is if the next lsap is removed. In that case,
+	 * hashbin_find_next() will return NULL and we will abort the
+	 * enumeration. - Jean II */
+
+	/* Also : we don't accept any skb in input. We can *NOT* pass
+	 * the same skb to multiple clients safely, we would need to
+	 * skb_clone() it. - Jean II */
+
+	lsap = (struct lsap_cb *) hashbin_get_first(lsap_hashbin);
+
+	while (NULL != hashbin_find_next(lsap_hashbin,
+					 (long) lsap,
+					 NULL,
+					 (void *) &lsap_next) ) {
+		irlmp_do_lsap_event(lsap, event, NULL);
+		lsap = lsap_next;
+	}
+}
+
+/*********************************************************************
+ *
+ *    LAP connection control states
+ *
+ ********************************************************************/
+
+/*
+ * Function irlmp_state_standby (event, skb, info)
+ *
+ *    STANDBY, The IrLAP connection does not exist.
+ *
+ */
+static void irlmp_state_standby(struct lap_cb *self, IRLMP_EVENT event,
+				struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+	IRDA_ASSERT(self->irlap != NULL, return;);
+
+	switch (event) {
+	case LM_LAP_DISCOVERY_REQUEST:
+		/* irlmp_next_station_state( LMP_DISCOVER); */
+
+		irlap_discovery_request(self->irlap, &irlmp->discovery_cmd);
+		break;
+	case LM_LAP_CONNECT_INDICATION:
+		/*  It's important to switch state first, to avoid IrLMP to
+		 *  think that the link is free since IrLMP may then start
+		 *  discovery before the connection is properly set up. DB.
+		 */
+		irlmp_next_lap_state(self, LAP_ACTIVE);
+
+		/* Just accept connection TODO, this should be fixed */
+		irlap_connect_response(self->irlap, skb);
+		break;
+	case LM_LAP_CONNECT_REQUEST:
+		IRDA_DEBUG(4, "%s() LS_CONNECT_REQUEST\n", __FUNCTION__);
+
+		irlmp_next_lap_state(self, LAP_U_CONNECT);
+
+		/* FIXME: need to set users requested QoS */
+		irlap_connect_request(self->irlap, self->daddr, NULL, 0);
+		break;
+	case LM_LAP_DISCONNECT_INDICATION:
+		IRDA_DEBUG(4, "%s(), Error LM_LAP_DISCONNECT_INDICATION\n",
+			   __FUNCTION__);
+
+		irlmp_next_lap_state(self, LAP_STANDBY);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s\n",
+			   __FUNCTION__, irlmp_event[event]);
+		break;
+	}
+}
+
+/*
+ * Function irlmp_state_u_connect (event, skb, info)
+ *
+ *    U_CONNECT, The layer above has tried to open an LSAP connection but
+ *    since the IrLAP connection does not exist, we must first start an
+ *    IrLAP connection. We are now waiting response from IrLAP.
+ * */
+static void irlmp_state_u_connect(struct lap_cb *self, IRLMP_EVENT event,
+				  struct sk_buff *skb)
+{
+	IRDA_DEBUG(2, "%s(), event=%s\n", __FUNCTION__, irlmp_event[event]);
+
+	switch (event) {
+	case LM_LAP_CONNECT_INDICATION:
+		/*  It's important to switch state first, to avoid IrLMP to
+		 *  think that the link is free since IrLMP may then start
+		 *  discovery before the connection is properly set up. DB.
+		 */
+		irlmp_next_lap_state(self, LAP_ACTIVE);
+
+		/* Just accept connection TODO, this should be fixed */
+		irlap_connect_response(self->irlap, skb);
+
+		/* Tell LSAPs that they can start sending data */
+		irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM);
+
+		/* Note : by the time we get there (LAP retries and co),
+		 * the lsaps may already have gone. This avoid getting stuck
+		 * forever in LAP_ACTIVE state - Jean II */
+		if (HASHBIN_GET_SIZE(self->lsaps) == 0) {
+			IRDA_DEBUG(0, "%s() NO LSAPs !\n",  __FUNCTION__);
+			irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT);
+		}
+		break;
+	case LM_LAP_CONNECT_REQUEST:
+		/* Already trying to connect */
+		break;
+	case LM_LAP_CONNECT_CONFIRM:
+		/* For all lsap_ce E Associated do LS_Connect_confirm */
+		irlmp_next_lap_state(self, LAP_ACTIVE);
+
+		/* Tell LSAPs that they can start sending data */
+		irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM);
+
+		/* Note : by the time we get there (LAP retries and co),
+		 * the lsaps may already have gone. This avoid getting stuck
+		 * forever in LAP_ACTIVE state - Jean II */
+		if (HASHBIN_GET_SIZE(self->lsaps) == 0) {
+			IRDA_DEBUG(0, "%s() NO LSAPs !\n",  __FUNCTION__);
+			irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT);
+		}
+		break;
+	case LM_LAP_DISCONNECT_INDICATION:
+		IRDA_DEBUG(4, "%s(), LM_LAP_DISCONNECT_INDICATION\n",  __FUNCTION__);
+		irlmp_next_lap_state(self, LAP_STANDBY);
+
+		/* Send disconnect event to all LSAPs using this link */
+		irlmp_do_all_lsap_event(self->lsaps,
+					LM_LAP_DISCONNECT_INDICATION);
+		break;
+	case LM_LAP_DISCONNECT_REQUEST:
+		IRDA_DEBUG(4, "%s(), LM_LAP_DISCONNECT_REQUEST\n",  __FUNCTION__);
+
+		/* One of the LSAP did timeout or was closed, if it was
+		 * the last one, try to get out of here - Jean II */
+		if (HASHBIN_GET_SIZE(self->lsaps) <= 1) {
+			irlap_disconnect_request(self->irlap);
+		}
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s\n",
+			 __FUNCTION__, irlmp_event[event]);
+		break;
+	}
+}
+
+/*
+ * Function irlmp_state_active (event, skb, info)
+ *
+ *    ACTIVE, IrLAP connection is active
+ *
+ */
+static void irlmp_state_active(struct lap_cb *self, IRLMP_EVENT event,
+			       struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	switch (event) {
+	case LM_LAP_CONNECT_REQUEST:
+		IRDA_DEBUG(4, "%s(), LS_CONNECT_REQUEST\n", __FUNCTION__);
+
+		/*
+		 * IrLAP may have a pending disconnect. We tried to close
+		 * IrLAP, but it was postponed because the link was
+		 * busy or we were still sending packets. As we now
+		 * need it, make sure it stays on. Jean II
+		 */
+		irlap_clear_disconnect(self->irlap);
+
+		/*
+		 *  LAP connection already active, just bounce back! Since we
+		 *  don't know which LSAP that tried to do this, we have to
+		 *  notify all LSAPs using this LAP, but that should be safe to
+		 *  do anyway.
+		 */
+		irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM);
+
+		/* Needed by connect indication */
+		irlmp_do_all_lsap_event(irlmp->unconnected_lsaps,
+					LM_LAP_CONNECT_CONFIRM);
+		/* Keep state */
+		break;
+	case LM_LAP_DISCONNECT_REQUEST:
+		/*
+		 *  Need to find out if we should close IrLAP or not. If there
+		 *  is only one LSAP connection left on this link, that LSAP
+		 *  must be the one that tries to close IrLAP. It will be
+		 *  removed later and moved to the list of unconnected LSAPs
+		 */
+		if (HASHBIN_GET_SIZE(self->lsaps) > 0) {
+			/* Timer value is checked in irsysctl - Jean II */
+			irlmp_start_idle_timer(self, sysctl_lap_keepalive_time * HZ / 1000);
+		} else {
+			/* No more connections, so close IrLAP */
+
+			/* We don't want to change state just yet, because
+			 * we want to reflect accurately the real state of
+			 * the LAP, not the state we wish it was in,
+			 * so that we don't lose LM_LAP_CONNECT_REQUEST.
+			 * In some cases, IrLAP won't close the LAP
+			 * immediately. For example, it might still be
+			 * retrying packets or waiting for the pf bit.
+			 * As the LAP always send a DISCONNECT_INDICATION
+			 * in PCLOSE or SCLOSE, just change state on that.
+			 * Jean II */
+			irlap_disconnect_request(self->irlap);
+		}
+		break;
+	case LM_LAP_IDLE_TIMEOUT:
+		if (HASHBIN_GET_SIZE(self->lsaps) == 0) {
+			/* Same reasoning as above - keep state */
+			irlap_disconnect_request(self->irlap);
+		}
+		break;
+	case LM_LAP_DISCONNECT_INDICATION:
+		irlmp_next_lap_state(self, LAP_STANDBY);
+
+		/* In some case, at this point our side has already closed
+		 * all lsaps, and we are waiting for the idle_timer to
+		 * expire. If another device reconnect immediately, the
+		 * idle timer will expire in the midle of the connection
+		 * initialisation, screwing up things a lot...
+		 * Therefore, we must stop the timer... */
+		irlmp_stop_idle_timer(self);
+
+		/*
+		 *  Inform all connected LSAP's using this link
+		 */
+		irlmp_do_all_lsap_event(self->lsaps,
+					LM_LAP_DISCONNECT_INDICATION);
+
+		/* Force an expiry of the discovery log.
+		 * Now that the LAP is free, the system may attempt to
+		 * connect to another device. Unfortunately, our entries
+		 * are stale. There is a small window (<3s) before the
+		 * normal discovery will run and where irlmp_connect_request()
+		 * can get the wrong info, so make sure things get
+		 * cleaned *NOW* ;-) - Jean II */
+		irlmp_do_expiry();
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s\n",
+			 __FUNCTION__, irlmp_event[event]);
+		break;
+	}
+}
+
+/*********************************************************************
+ *
+ *    LSAP connection control states
+ *
+ ********************************************************************/
+
+/*
+ * Function irlmp_state_disconnected (event, skb, info)
+ *
+ *    DISCONNECTED
+ *
+ */
+static int irlmp_state_disconnected(struct lsap_cb *self, IRLMP_EVENT event,
+				    struct sk_buff *skb)
+{
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+	switch (event) {
+#ifdef CONFIG_IRDA_ULTRA
+	case LM_UDATA_INDICATION:
+		/* This is most bizzare. Those packets are  aka unreliable
+		 * connected, aka IrLPT or SOCK_DGRAM/IRDAPROTO_UNITDATA.
+		 * Why do we pass them as Ultra ??? Jean II */
+		irlmp_connless_data_indication(self, skb);
+		break;
+#endif /* CONFIG_IRDA_ULTRA */
+	case LM_CONNECT_REQUEST:
+		IRDA_DEBUG(4, "%s(), LM_CONNECT_REQUEST\n", __FUNCTION__);
+
+		if (self->conn_skb) {
+			IRDA_WARNING("%s: busy with another request!\n",
+				     __FUNCTION__);
+			return -EBUSY;
+		}
+		/* Don't forget to refcount it (see irlmp_connect_request()) */
+		skb_get(skb);
+		self->conn_skb = skb;
+
+		irlmp_next_lsap_state(self, LSAP_SETUP_PEND);
+
+		/* Start watchdog timer (5 secs for now) */
+		irlmp_start_watchdog_timer(self, 5*HZ);
+
+		irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL);
+		break;
+	case LM_CONNECT_INDICATION:
+		if (self->conn_skb) {
+			IRDA_WARNING("%s: busy with another request!\n",
+				     __FUNCTION__);
+			return -EBUSY;
+		}
+		/* Don't forget to refcount it (see irlap_driver_rcv()) */
+		skb_get(skb);
+		self->conn_skb = skb;
+
+		irlmp_next_lsap_state(self, LSAP_CONNECT_PEND);
+
+		/* Start watchdog timer
+		 * This is not mentionned in the spec, but there is a rare
+		 * race condition that can get the socket stuck.
+		 * If we receive this event while our LAP is closing down,
+		 * the LM_LAP_CONNECT_REQUEST get lost and we get stuck in
+		 * CONNECT_PEND state forever.
+		 * The other cause of getting stuck down there is if the
+		 * higher layer never reply to the CONNECT_INDICATION.
+		 * Anyway, it make sense to make sure that we always have
+		 * a backup plan. 1 second is plenty (should be immediate).
+		 * Jean II */
+		irlmp_start_watchdog_timer(self, 1*HZ);
+
+		irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL);
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown event %s on LSAP %#02x\n",
+			   __FUNCTION__, irlmp_event[event], self->slsap_sel);
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlmp_state_connect (self, event, skb)
+ *
+ *    CONNECT
+ *
+ */
+static int irlmp_state_connect(struct lsap_cb *self, IRLMP_EVENT event,
+				struct sk_buff *skb)
+{
+	struct lsap_cb *lsap;
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+	switch (event) {
+	case LM_CONNECT_RESPONSE:
+		/*
+		 *  Bind this LSAP to the IrLAP link where the connect was
+		 *  received
+		 */
+		lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self,
+				      NULL);
+
+		IRDA_ASSERT(lsap == self, return -1;);
+		IRDA_ASSERT(self->lap != NULL, return -1;);
+		IRDA_ASSERT(self->lap->lsaps != NULL, return -1;);
+
+		hashbin_insert(self->lap->lsaps, (irda_queue_t *) self,
+			       (long) self, NULL);
+
+		set_bit(0, &self->connected);	/* TRUE */
+
+		irlmp_send_lcf_pdu(self->lap, self->dlsap_sel,
+				   self->slsap_sel, CONNECT_CNF, skb);
+
+		del_timer(&self->watchdog_timer);
+
+		irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY);
+		break;
+	case LM_WATCHDOG_TIMEOUT:
+		/* May happen, who knows...
+		 * Jean II */
+		IRDA_DEBUG(0, "%s() WATCHDOG_TIMEOUT!\n",  __FUNCTION__);
+
+		/* Disconnect, get out... - Jean II */
+		self->lap = NULL;
+		self->dlsap_sel = LSAP_ANY;
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+		break;
+	default:
+		/* LM_LAP_DISCONNECT_INDICATION : Should never happen, we
+		 * are *not* yet bound to the IrLAP link. Jean II */
+		IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n", 
+			   __FUNCTION__, irlmp_event[event], self->slsap_sel);
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlmp_state_connect_pend (event, skb, info)
+ *
+ *    CONNECT_PEND
+ *
+ */
+static int irlmp_state_connect_pend(struct lsap_cb *self, IRLMP_EVENT event,
+				    struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb;
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+	switch (event) {
+	case LM_CONNECT_REQUEST:
+		/* Keep state */
+		break;
+	case LM_CONNECT_RESPONSE:
+		IRDA_DEBUG(0, "%s(), LM_CONNECT_RESPONSE, "
+			   "no indication issued yet\n",  __FUNCTION__);
+		/* Keep state */
+		break;
+	case LM_DISCONNECT_REQUEST:
+		IRDA_DEBUG(0, "%s(), LM_DISCONNECT_REQUEST, "
+			   "not yet bound to IrLAP connection\n",  __FUNCTION__);
+		/* Keep state */
+		break;
+	case LM_LAP_CONNECT_CONFIRM:
+		IRDA_DEBUG(4, "%s(), LS_CONNECT_CONFIRM\n",  __FUNCTION__);
+		irlmp_next_lsap_state(self, LSAP_CONNECT);
+
+		tx_skb = self->conn_skb;
+		self->conn_skb = NULL;
+
+		irlmp_connect_indication(self, tx_skb);
+		/* Drop reference count - see irlmp_connect_indication(). */
+		dev_kfree_skb(tx_skb);
+		break;
+	case LM_WATCHDOG_TIMEOUT:
+		/* Will happen in some rare cases because of a race condition.
+		 * Just make sure we don't stay there forever...
+		 * Jean II */
+		IRDA_DEBUG(0, "%s() WATCHDOG_TIMEOUT!\n",  __FUNCTION__);
+
+		/* Go back to disconnected mode, keep the socket waiting */
+		self->lap = NULL;
+		self->dlsap_sel = LSAP_ANY;
+		if(self->conn_skb)
+			dev_kfree_skb(self->conn_skb);
+		self->conn_skb = NULL;
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+		break;
+	default:
+		/* LM_LAP_DISCONNECT_INDICATION : Should never happen, we
+		 * are *not* yet bound to the IrLAP link. Jean II */
+		IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n",
+			   __FUNCTION__, irlmp_event[event], self->slsap_sel);
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlmp_state_dtr (self, event, skb)
+ *
+ *    DATA_TRANSFER_READY
+ *
+ */
+static int irlmp_state_dtr(struct lsap_cb *self, IRLMP_EVENT event,
+			   struct sk_buff *skb)
+{
+	LM_REASON reason;
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+	IRDA_ASSERT(self->lap != NULL, return -1;);
+
+	switch (event) {
+	case LM_DATA_REQUEST: /* Optimize for the common case */
+		irlmp_send_data_pdu(self->lap, self->dlsap_sel,
+				    self->slsap_sel, FALSE, skb);
+		break;
+	case LM_DATA_INDICATION: /* Optimize for the common case */
+		irlmp_data_indication(self, skb);
+		break;
+	case LM_UDATA_REQUEST:
+		IRDA_ASSERT(skb != NULL, return -1;);
+		irlmp_send_data_pdu(self->lap, self->dlsap_sel,
+				    self->slsap_sel, TRUE, skb);
+		break;
+	case LM_UDATA_INDICATION:
+		irlmp_udata_indication(self, skb);
+		break;
+	case LM_CONNECT_REQUEST:
+		IRDA_DEBUG(0, "%s(), LM_CONNECT_REQUEST, "
+			   "error, LSAP already connected\n", __FUNCTION__);
+		/* Keep state */
+		break;
+	case LM_CONNECT_RESPONSE:
+		IRDA_DEBUG(0, "%s(), LM_CONNECT_RESPONSE, "
+			   "error, LSAP already connected\n", __FUNCTION__);
+		/* Keep state */
+		break;
+	case LM_DISCONNECT_REQUEST:
+		irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, self->slsap_sel,
+				   DISCONNECT, skb);
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+		/* Called only from irlmp_disconnect_request(), will
+		 * unbind from LAP over there. Jean II */
+
+		/* Try to close the LAP connection if its still there */
+		if (self->lap) {
+			IRDA_DEBUG(4, "%s(), trying to close IrLAP\n",
+				   __FUNCTION__);
+			irlmp_do_lap_event(self->lap,
+					   LM_LAP_DISCONNECT_REQUEST,
+					   NULL);
+		}
+		break;
+	case LM_LAP_DISCONNECT_INDICATION:
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		reason = irlmp_convert_lap_reason(self->lap->reason);
+
+		irlmp_disconnect_indication(self, reason, NULL);
+		break;
+	case LM_DISCONNECT_INDICATION:
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		IRDA_ASSERT(self->lap != NULL, return -1;);
+		IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+		IRDA_ASSERT(skb != NULL, return -1;);
+		IRDA_ASSERT(skb->len > 3, return -1;);
+		reason = skb->data[3];
+
+		 /* Try to close the LAP connection */
+		IRDA_DEBUG(4, "%s(), trying to close IrLAP\n", __FUNCTION__);
+		irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+
+		irlmp_disconnect_indication(self, reason, skb);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n",
+			   __FUNCTION__, irlmp_event[event], self->slsap_sel);
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlmp_state_setup (event, skb, info)
+ *
+ *    SETUP, Station Control has set up the underlying IrLAP connection.
+ *    An LSAP connection request has been transmitted to the peer
+ *    LSAP-Connection Control FSM and we are awaiting reply.
+ */
+static int irlmp_state_setup(struct lsap_cb *self, IRLMP_EVENT event,
+			     struct sk_buff *skb)
+{
+	LM_REASON reason;
+	int ret = 0;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;);
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	switch (event) {
+	case LM_CONNECT_CONFIRM:
+		irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY);
+
+		del_timer(&self->watchdog_timer);
+
+		irlmp_connect_confirm(self, skb);
+		break;
+	case LM_DISCONNECT_INDICATION:
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		IRDA_ASSERT(self->lap != NULL, return -1;);
+		IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+		IRDA_ASSERT(skb != NULL, return -1;);
+		IRDA_ASSERT(skb->len > 3, return -1;);
+		reason = skb->data[3];
+
+		 /* Try to close the LAP connection */
+		IRDA_DEBUG(4, "%s(), trying to close IrLAP\n",  __FUNCTION__);
+		irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+
+		irlmp_disconnect_indication(self, reason, skb);
+		break;
+	case LM_LAP_DISCONNECT_INDICATION:
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		del_timer(&self->watchdog_timer);
+
+		IRDA_ASSERT(self->lap != NULL, return -1;);
+		IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;);
+
+		reason = irlmp_convert_lap_reason(self->lap->reason);
+
+		irlmp_disconnect_indication(self, reason, skb);
+		break;
+	case LM_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(0, "%s() WATCHDOG_TIMEOUT!\n", __FUNCTION__);
+
+		IRDA_ASSERT(self->lap != NULL, return -1;);
+		irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n",
+			   __FUNCTION__, irlmp_event[event], self->slsap_sel);
+		break;
+	}
+	return ret;
+}
+
+/*
+ * Function irlmp_state_setup_pend (event, skb, info)
+ *
+ *    SETUP_PEND, An LM_CONNECT_REQUEST has been received from the service
+ *    user to set up an LSAP connection. A request has been sent to the
+ *    LAP FSM to set up the underlying IrLAP connection, and we
+ *    are awaiting confirm.
+ */
+static int irlmp_state_setup_pend(struct lsap_cb *self, IRLMP_EVENT event,
+				  struct sk_buff *skb)
+{
+	struct sk_buff *tx_skb;
+	LM_REASON reason;
+	int ret = 0;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(irlmp != NULL, return -1;);
+
+	switch (event) {
+	case LM_LAP_CONNECT_CONFIRM:
+		IRDA_ASSERT(self->conn_skb != NULL, return -1;);
+
+		tx_skb = self->conn_skb;
+		self->conn_skb = NULL;
+
+		irlmp_send_lcf_pdu(self->lap, self->dlsap_sel,
+				   self->slsap_sel, CONNECT_CMD, tx_skb);
+		/* Drop reference count - see irlap_data_request(). */
+		dev_kfree_skb(tx_skb);
+
+		irlmp_next_lsap_state(self, LSAP_SETUP);
+		break;
+	case LM_WATCHDOG_TIMEOUT:
+		IRDA_DEBUG(0, "%s() : WATCHDOG_TIMEOUT !\n",  __FUNCTION__);
+
+		IRDA_ASSERT(self->lap != NULL, return -1;);
+		irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL);
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL);
+		break;
+	case LM_LAP_DISCONNECT_INDICATION: /* LS_Disconnect.indication */
+		del_timer( &self->watchdog_timer);
+
+		irlmp_next_lsap_state(self, LSAP_DISCONNECTED);
+
+		reason = irlmp_convert_lap_reason(self->lap->reason);
+
+		irlmp_disconnect_indication(self, reason, NULL);
+		break;
+	default:
+		IRDA_DEBUG(0, "%s(), Unknown event %s on LSAP %#02x\n",
+			   __FUNCTION__, irlmp_event[event], self->slsap_sel);
+		break;
+	}
+	return ret;
+}
diff --git a/net/irda/irlmp_frame.c b/net/irda/irlmp_frame.c
new file mode 100644
index 00000000000..91cd268172f
--- /dev/null
+++ b/net/irda/irlmp_frame.c
@@ -0,0 +1,491 @@
+/*********************************************************************
+ *                
+ * Filename:      irlmp_frame.c
+ * Version:       0.9
+ * Description:   IrLMP frame implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Aug 19 02:09:59 1997
+ * Modified at:   Mon Dec 13 13:41:12 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+#include <linux/kernel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/timer.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irlmp_frame.h>
+#include <net/irda/discovery.h>
+
+static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap, 
+				       __u8 slsap, int status, hashbin_t *);
+
+inline void irlmp_send_data_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap,
+				int expedited, struct sk_buff *skb)
+{
+	skb->data[0] = dlsap;
+	skb->data[1] = slsap;
+
+	if (expedited) {
+		IRDA_DEBUG(4, "%s(), sending expedited data\n", __FUNCTION__);
+		irlap_data_request(self->irlap, skb, TRUE);
+	} else
+		irlap_data_request(self->irlap, skb, FALSE);
+}
+
+/*
+ * Function irlmp_send_lcf_pdu (dlsap, slsap, opcode,skb)
+ *
+ *    Send Link Control Frame to IrLAP
+ */
+void irlmp_send_lcf_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap,
+			__u8 opcode, struct sk_buff *skb) 
+{
+	__u8 *frame;
+	
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+	
+	frame = skb->data;
+	
+	frame[0] = dlsap | CONTROL_BIT;
+	frame[1] = slsap;
+
+	frame[2] = opcode;
+
+	if (opcode == DISCONNECT)
+		frame[3] = 0x01; /* Service user request */
+	else
+		frame[3] = 0x00; /* rsvd */
+
+	irlap_data_request(self->irlap, skb, FALSE);
+}
+
+/*
+ * Function irlmp_input (skb)
+ *
+ *    Used by IrLAP to pass received data frames to IrLMP layer
+ *
+ */
+void irlmp_link_data_indication(struct lap_cb *self, struct sk_buff *skb, 
+				int unreliable)
+{
+	struct lsap_cb *lsap;
+	__u8   slsap_sel;   /* Source (this) LSAP address */
+	__u8   dlsap_sel;   /* Destination LSAP address */
+	__u8   *fp;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+	IRDA_ASSERT(skb->len > 2, return;);
+
+	fp = skb->data;
+
+	/*
+	 *  The next statements may be confusing, but we do this so that 
+	 *  destination LSAP of received frame is source LSAP in our view
+	 */
+	slsap_sel = fp[0] & LSAP_MASK; 
+	dlsap_sel = fp[1];	
+
+	/*
+	 *  Check if this is an incoming connection, since we must deal with
+	 *  it in a different way than other established connections.
+	 */
+	if ((fp[0] & CONTROL_BIT) && (fp[2] == CONNECT_CMD)) {
+		IRDA_DEBUG(3, "%s(), incoming connection, "
+			   "source LSAP=%d, dest LSAP=%d\n",
+			   __FUNCTION__, slsap_sel, dlsap_sel);
+		
+		/* Try to find LSAP among the unconnected LSAPs */
+		lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, CONNECT_CMD,
+				       irlmp->unconnected_lsaps);
+		
+		/* Maybe LSAP was already connected, so try one more time */
+		if (!lsap) {
+			IRDA_DEBUG(1, "%s(), incoming connection for LSAP already connected\n", __FUNCTION__);
+			lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0,
+					       self->lsaps);
+		}
+	} else
+		lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0, 
+				       self->lsaps);
+	
+	if (lsap == NULL) {
+		IRDA_DEBUG(2, "IrLMP, Sorry, no LSAP for received frame!\n");
+		IRDA_DEBUG(2, "%s(), slsap_sel = %02x, dlsap_sel = %02x\n",
+			   __FUNCTION__, slsap_sel, dlsap_sel);
+		if (fp[0] & CONTROL_BIT) {
+			IRDA_DEBUG(2, "%s(), received control frame %02x\n",
+				   __FUNCTION__, fp[2]);
+		} else {
+			IRDA_DEBUG(2, "%s(), received data frame\n", __FUNCTION__);
+		}
+		return;
+	}
+
+	/* 
+	 *  Check if we received a control frame? 
+	 */
+	if (fp[0] & CONTROL_BIT) {
+		switch (fp[2]) {
+		case CONNECT_CMD:
+			lsap->lap = self;
+			irlmp_do_lsap_event(lsap, LM_CONNECT_INDICATION, skb);
+			break;
+		case CONNECT_CNF:
+			irlmp_do_lsap_event(lsap, LM_CONNECT_CONFIRM, skb);
+			break;
+		case DISCONNECT:
+			IRDA_DEBUG(4, "%s(), Disconnect indication!\n",
+				   __FUNCTION__);
+			irlmp_do_lsap_event(lsap, LM_DISCONNECT_INDICATION, 
+					    skb);
+			break;
+		case ACCESSMODE_CMD:
+			IRDA_DEBUG(0, "Access mode cmd not implemented!\n");
+			break;
+		case ACCESSMODE_CNF:
+			IRDA_DEBUG(0, "Access mode cnf not implemented!\n");
+			break;
+		default:
+			IRDA_DEBUG(0, "%s(), Unknown control frame %02x\n",
+				   __FUNCTION__, fp[2]);
+			break;
+		}
+	} else if (unreliable) {
+		/* Optimize and bypass the state machine if possible */
+		if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY)
+			irlmp_udata_indication(lsap, skb);
+		else
+			irlmp_do_lsap_event(lsap, LM_UDATA_INDICATION, skb);
+	} else {	
+		/* Optimize and bypass the state machine if possible */
+		if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY)
+			irlmp_data_indication(lsap, skb);
+		else
+			irlmp_do_lsap_event(lsap, LM_DATA_INDICATION, skb);
+	}
+}
+
+/*
+ * Function irlmp_link_unitdata_indication (self, skb)
+ *
+ *    
+ *
+ */
+#ifdef CONFIG_IRDA_ULTRA
+void irlmp_link_unitdata_indication(struct lap_cb *self, struct sk_buff *skb)
+{
+	struct lsap_cb *lsap;
+	__u8   slsap_sel;   /* Source (this) LSAP address */
+	__u8   dlsap_sel;   /* Destination LSAP address */
+	__u8   pid;         /* Protocol identifier */
+	__u8   *fp;
+	unsigned long flags;
+	
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+	IRDA_ASSERT(skb->len > 2, return;);
+
+	fp = skb->data;
+
+	/*
+	 *  The next statements may be confusing, but we do this so that 
+	 *  destination LSAP of received frame is source LSAP in our view
+	 */
+	slsap_sel = fp[0] & LSAP_MASK; 
+	dlsap_sel = fp[1];
+	pid       = fp[2];
+	
+	if (pid & 0x80) {
+		IRDA_DEBUG(0, "%s(), extension in PID not supp!\n",
+			   __FUNCTION__);
+		return;
+	}
+
+	/* Check if frame is addressed to the connectionless LSAP */
+	if ((slsap_sel != LSAP_CONNLESS) || (dlsap_sel != LSAP_CONNLESS)) {
+		IRDA_DEBUG(0, "%s(), dropping frame!\n", __FUNCTION__);
+		return;
+	}
+	
+	/* Search the connectionless LSAP */
+	spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+	lsap = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps);
+	while (lsap != NULL) {
+		/*
+		 *  Check if source LSAP and dest LSAP selectors and PID match.
+		 */
+		if ((lsap->slsap_sel == slsap_sel) && 
+		    (lsap->dlsap_sel == dlsap_sel) && 
+		    (lsap->pid == pid)) 
+		{			
+			break;
+		}
+		lsap = (struct lsap_cb *) hashbin_get_next(irlmp->unconnected_lsaps);
+	}
+	spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags);
+
+	if (lsap)
+		irlmp_connless_data_indication(lsap, skb);
+	else {
+		IRDA_DEBUG(0, "%s(), found no matching LSAP!\n", __FUNCTION__);
+	}
+}
+#endif /* CONFIG_IRDA_ULTRA */
+
+/*
+ * Function irlmp_link_disconnect_indication (reason, userdata)
+ *
+ *    IrLAP has disconnected 
+ *
+ */
+void irlmp_link_disconnect_indication(struct lap_cb *lap, 
+				      struct irlap_cb *irlap, 
+				      LAP_REASON reason, 
+				      struct sk_buff *skb)
+{
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(lap != NULL, return;);
+	IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;);
+
+	lap->reason = reason;
+	lap->daddr = DEV_ADDR_ANY;
+
+        /* FIXME: must do something with the skb if any */
+	
+	/*
+	 *  Inform station state machine
+	 */
+	irlmp_do_lap_event(lap, LM_LAP_DISCONNECT_INDICATION, NULL);
+}
+
+/*
+ * Function irlmp_link_connect_indication (qos)
+ *
+ *    Incoming LAP connection!
+ *
+ */
+void irlmp_link_connect_indication(struct lap_cb *self, __u32 saddr, 
+				   __u32 daddr, struct qos_info *qos,
+				   struct sk_buff *skb) 
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/* Copy QoS settings for this session */
+	self->qos = qos;
+
+	/* Update destination device address */
+	self->daddr = daddr;
+	IRDA_ASSERT(self->saddr == saddr, return;);
+
+	irlmp_do_lap_event(self, LM_LAP_CONNECT_INDICATION, skb);
+}
+
+/*
+ * Function irlmp_link_connect_confirm (qos)
+ *
+ *    LAP connection confirmed!
+ *
+ */
+void irlmp_link_connect_confirm(struct lap_cb *self, struct qos_info *qos, 
+				struct sk_buff *skb)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+	IRDA_ASSERT(qos != NULL, return;);
+
+	/* Don't need use the skb for now */
+
+	/* Copy QoS settings for this session */
+	self->qos = qos;
+
+	irlmp_do_lap_event(self, LM_LAP_CONNECT_CONFIRM, NULL);
+}
+
+/*
+ * Function irlmp_link_discovery_indication (self, log)
+ *
+ *    Device is discovering us
+ *
+ * It's not an answer to our own discoveries, just another device trying
+ * to perform discovery, but we don't want to miss the opportunity
+ * to exploit this information, because :
+ *	o We may not actively perform discovery (just passive discovery)
+ *	o This type of discovery is much more reliable. In some cases, it
+ *	  seem that less than 50% of our discoveries get an answer, while
+ *	  we always get ~100% of these.
+ *	o Make faster discovery, statistically divide time of discovery
+ *	  events by 2 (important for the latency aspect and user feel)
+ *	o Even is we do active discovery, the other node might not
+ *	  answer our discoveries (ex: Palm). The Palm will just perform
+ *	  one active discovery and connect directly to us.
+ *
+ * However, when both devices discover each other, they might attempt to
+ * connect to each other following the discovery event, and it would create
+ * collisions on the medium (SNRM battle).
+ * The "fix" for that is to disable all connection requests in IrLAP
+ * for 100ms after a discovery indication by setting the media_busy flag.
+ * Previously, we used to postpone the event which was quite ugly. Now
+ * that IrLAP takes care of this problem, just pass the event up...
+ *
+ * Jean II
+ */
+void irlmp_link_discovery_indication(struct lap_cb *self, 
+				     discovery_t *discovery)
+{
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+
+	/* Add to main log, cleanup */
+	irlmp_add_discovery(irlmp->cachelog, discovery);
+	
+	/* Just handle it the same way as a discovery confirm,
+	 * bypass the LM_LAP state machine (see below) */
+	irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_PASSIVE);
+}
+
+/*
+ * Function irlmp_link_discovery_confirm (self, log)
+ *
+ *    Called by IrLAP with a list of discoveries after the discovery
+ *    request has been carried out. A NULL log is received if IrLAP
+ *    was unable to carry out the discovery request
+ *
+ */
+void irlmp_link_discovery_confirm(struct lap_cb *self, hashbin_t *log)
+{
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;);
+	
+	/* Add to main log, cleanup */
+	irlmp_add_discovery_log(irlmp->cachelog, log);
+
+	/* Propagate event to various LSAPs registered for it.
+	 * We bypass the LM_LAP state machine because
+	 *	1) We do it regardless of the LM_LAP state
+	 *	2) It doesn't affect the LM_LAP state
+	 *	3) Faster, slimer, simpler, ...
+	 * Jean II */
+	irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_ACTIVE);
+}
+
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+static inline void irlmp_update_cache(struct lap_cb *lap,
+				      struct lsap_cb *lsap)
+{
+	/* Prevent concurrent read to get garbage */
+	lap->cache.valid = FALSE;
+	/* Update cache entry */
+	lap->cache.dlsap_sel = lsap->dlsap_sel;
+	lap->cache.slsap_sel = lsap->slsap_sel;
+	lap->cache.lsap = lsap;
+	lap->cache.valid = TRUE;
+}
+#endif
+
+/*
+ * Function irlmp_find_handle (self, dlsap_sel, slsap_sel, status, queue)
+ *
+ *    Find handle associated with destination and source LSAP
+ *
+ * Any IrDA connection (LSAP/TSAP) is uniquely identified by
+ * 3 parameters, the local lsap, the remote lsap and the remote address. 
+ * We may initiate multiple connections to the same remote service
+ * (they will have different local lsap), a remote device may initiate
+ * multiple connections to the same local service (they will have
+ * different remote lsap), or multiple devices may connect to the same
+ * service and may use the same remote lsap (and they will have
+ * different remote address).
+ * So, where is the remote address ? Each LAP connection is made with
+ * a single remote device, so imply a specific remote address.
+ * Jean II
+ */
+static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap_sel,
+				       __u8 slsap_sel, int status,
+				       hashbin_t *queue) 
+{
+	struct lsap_cb *lsap;
+	unsigned long flags;
+	
+	/* 
+	 *  Optimize for the common case. We assume that the last frame
+	 *  received is in the same connection as the last one, so check in
+	 *  cache first to avoid the linear search
+	 */
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	if ((self->cache.valid) && 
+	    (self->cache.slsap_sel == slsap_sel) && 
+	    (self->cache.dlsap_sel == dlsap_sel)) 
+	{
+		return (self->cache.lsap);
+	}
+#endif
+
+	spin_lock_irqsave(&queue->hb_spinlock, flags);
+
+	lsap = (struct lsap_cb *) hashbin_get_first(queue);
+	while (lsap != NULL) {
+		/* 
+		 *  If this is an incoming connection, then the destination 
+		 *  LSAP selector may have been specified as LM_ANY so that 
+		 *  any client can connect. In that case we only need to check
+		 *  if the source LSAP (in our view!) match!
+		 */
+		if ((status == CONNECT_CMD) && 
+		    (lsap->slsap_sel == slsap_sel) &&      
+		    (lsap->dlsap_sel == LSAP_ANY)) {
+			/* This is where the dest lsap sel is set on incoming
+			 * lsaps */
+			lsap->dlsap_sel = dlsap_sel;
+			break;
+		}
+		/*
+		 *  Check if source LSAP and dest LSAP selectors match.
+		 */
+		if ((lsap->slsap_sel == slsap_sel) && 
+		    (lsap->dlsap_sel == dlsap_sel)) 
+			break;
+
+		lsap = (struct lsap_cb *) hashbin_get_next(queue);
+	}
+#ifdef CONFIG_IRDA_CACHE_LAST_LSAP
+	if(lsap)
+		irlmp_update_cache(self, lsap);
+#endif
+	spin_unlock_irqrestore(&queue->hb_spinlock, flags);
+
+	/* Return what we've found or NULL */
+	return lsap;
+}
diff --git a/net/irda/irmod.c b/net/irda/irmod.c
new file mode 100644
index 00000000000..6ffaed4544e
--- /dev/null
+++ b/net/irda/irmod.c
@@ -0,0 +1,185 @@
+/*********************************************************************
+ *                
+ * Filename:      irmod.c
+ * Version:       0.9
+ * Description:   IrDA stack main entry points
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Dec 15 13:55:39 1997
+ * Modified at:   Wed Jan  5 15:12:41 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999-2000 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+/*
+ * This file contains the main entry points of the IrDA stack.
+ * They are in this file and not af_irda.c because some developpers
+ * are using the IrDA stack without the socket API (compiling out
+ * af_irda.c).
+ * Jean II
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>		/* notify_t */
+#include <net/irda/irlap.h>		/* irlap_init */
+#include <net/irda/irlmp.h>		/* irlmp_init */
+#include <net/irda/iriap.h>		/* iriap_init */
+#include <net/irda/irttp.h>		/* irttp_init */
+#include <net/irda/irda_device.h>	/* irda_device_init */
+
+/* irproc.c */
+extern void irda_proc_register(void);
+extern void irda_proc_unregister(void);
+/* irsysctl.c */
+extern int  irda_sysctl_register(void);
+extern void irda_sysctl_unregister(void);
+/* af_irda.c */
+extern int  irsock_init(void);
+extern void irsock_cleanup(void);
+/* irlap_frame.c */
+extern int  irlap_driver_rcv(struct sk_buff *, struct net_device *, 
+			     struct packet_type *);
+
+/*
+ * Module parameters
+ */
+#ifdef CONFIG_IRDA_DEBUG
+unsigned int irda_debug = IRDA_DEBUG_LEVEL;
+module_param_named(debug, irda_debug, uint, 0);
+MODULE_PARM_DESC(debug, "IRDA debugging level");
+EXPORT_SYMBOL(irda_debug);
+#endif
+
+/* Packet type handler.
+ * Tell the kernel how IrDA packets should be handled.
+ */
+static struct packet_type irda_packet_type = {
+	.type	= __constant_htons(ETH_P_IRDA),
+	.func	= irlap_driver_rcv,	/* Packet type handler irlap_frame.c */
+};
+
+/*
+ * Function irda_notify_init (notify)
+ *
+ *    Used for initializing the notify structure
+ *
+ */
+void irda_notify_init(notify_t *notify)
+{
+	notify->data_indication = NULL;
+	notify->udata_indication = NULL;
+	notify->connect_confirm = NULL;
+	notify->connect_indication = NULL;
+	notify->disconnect_indication = NULL;
+	notify->flow_indication = NULL;
+	notify->status_indication = NULL;
+	notify->instance = NULL;
+	strlcpy(notify->name, "Unknown", sizeof(notify->name));
+}
+EXPORT_SYMBOL(irda_notify_init);
+
+/*
+ * Function irda_init (void)
+ *
+ *  Protocol stack initialisation entry point.
+ *  Initialise the various components of the IrDA stack
+ */
+static int __init irda_init(void)
+{
+	IRDA_DEBUG(0, "%s()\n", __FUNCTION__);
+
+	/* Lower layer of the stack */
+ 	irlmp_init();
+	irlap_init();
+	
+	/* Higher layers of the stack */
+	iriap_init();
+ 	irttp_init();
+	irsock_init();
+	
+	/* Add IrDA packet type (Start receiving packets) */
+        dev_add_pack(&irda_packet_type);
+
+	/* External APIs */
+#ifdef CONFIG_PROC_FS
+	irda_proc_register();
+#endif
+#ifdef CONFIG_SYSCTL
+	irda_sysctl_register();
+#endif
+
+	/* Driver/dongle support */
+ 	irda_device_init();
+
+	return 0;
+}
+
+/*
+ * Function irda_cleanup (void)
+ *
+ *  Protocol stack cleanup/removal entry point.
+ *  Cleanup the various components of the IrDA stack
+ */
+static void __exit irda_cleanup(void)
+{
+	/* Remove External APIs */
+#ifdef CONFIG_SYSCTL
+	irda_sysctl_unregister();
+#endif	
+#ifdef CONFIG_PROC_FS
+	irda_proc_unregister();
+#endif
+
+	/* Remove IrDA packet type (stop receiving packets) */
+        dev_remove_pack(&irda_packet_type);
+	
+	/* Remove higher layers */
+	irsock_cleanup();
+	irttp_cleanup();
+	iriap_cleanup();
+
+	/* Remove lower layers */
+	irda_device_cleanup();
+	irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */
+
+	/* Remove middle layer */
+	irlmp_cleanup();
+}
+
+/*
+ * The IrDA stack must be initialised *before* drivers get initialised,
+ * and *before* higher protocols (IrLAN/IrCOMM/IrNET) get initialised,
+ * otherwise bad things will happen (hashbins will be NULL for example).
+ * Those modules are at module_init()/device_initcall() level.
+ *
+ * On the other hand, it needs to be initialised *after* the basic
+ * networking, the /proc/net filesystem and sysctl module. Those are
+ * currently initialised in .../init/main.c (before initcalls).
+ * Also, IrDA drivers needs to be initialised *after* the random number
+ * generator (main stack and higher layer init don't need it anymore).
+ *
+ * Jean II
+ */
+subsys_initcall(irda_init);
+module_exit(irda_cleanup);
+ 
+MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> & Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("The Linux IrDA Protocol Stack"); 
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_NETPROTO(PF_IRDA);
diff --git a/net/irda/irnet/Kconfig b/net/irda/irnet/Kconfig
new file mode 100644
index 00000000000..28c557f0fdd
--- /dev/null
+++ b/net/irda/irnet/Kconfig
@@ -0,0 +1,13 @@
+config IRNET
+	tristate "IrNET protocol"
+	depends on IRDA && PPP
+	help
+	  Say Y here if you want to build support for the IrNET protocol.
+	  To compile it as a module, choose M here: the module will be
+	  called irnet.  IrNET is a PPP driver, so you will also need a
+	  working PPP subsystem (driver, daemon and config)...
+
+	  IrNET is an alternate way to transfer TCP/IP traffic over IrDA.  It
+	  uses synchronous PPP over a set of point to point IrDA sockets.  You
+	  can use it between Linux machine or with W2k.
+
diff --git a/net/irda/irnet/Makefile b/net/irda/irnet/Makefile
new file mode 100644
index 00000000000..b3ee01e0def
--- /dev/null
+++ b/net/irda/irnet/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux IrDA IrNET protocol layer.
+#
+
+obj-$(CONFIG_IRNET) += irnet.o
+
+irnet-objs := irnet_ppp.o irnet_irda.o
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
new file mode 100644
index 00000000000..9004f7349a7
--- /dev/null
+++ b/net/irda/irnet/irnet.h
@@ -0,0 +1,529 @@
+/*
+ *	IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ *		Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains definitions and declarations global to the IrNET module,
+ * all grouped in one place...
+ * This file is a *private* header, so other modules don't want to know
+ * what's in there...
+ *
+ * Note : as most part of the Linux kernel, this module is available
+ * under the GNU General Public License (GPL).
+ */
+
+#ifndef IRNET_H
+#define IRNET_H
+
+/************************** DOCUMENTATION ***************************/
+/*
+ * What is IrNET
+ * -------------
+ * IrNET is a protocol allowing to carry TCP/IP traffic between two
+ * IrDA peers in an efficient fashion. It is a thin layer, passing PPP
+ * packets to IrTTP and vice versa. It uses PPP in synchronous mode,
+ * because IrTTP offer a reliable sequenced packet service (as opposed
+ * to a byte stream). In fact, you could see IrNET as carrying TCP/IP
+ * in a IrDA socket, using PPP to provide the glue.
+ *
+ * The main difference with traditional PPP over IrCOMM is that we
+ * avoid the framing and serial emulation which are a performance
+ * bottleneck. It also allows multipoint communications in a sensible
+ * fashion.
+ *
+ * The main difference with IrLAN is that we use PPP for the link
+ * management, which is more standard, interoperable and flexible than
+ * the IrLAN protocol. For example, PPP adds authentication,
+ * encryption, compression, header compression and automated routing
+ * setup. And, as IrNET let PPP do the hard work, the implementation
+ * is much simpler than IrLAN.
+ *
+ * The Linux implementation
+ * ------------------------
+ * IrNET is written on top of the Linux-IrDA stack, and interface with
+ * the generic Linux PPP driver. Because IrNET depend on recent
+ * changes of the PPP driver interface, IrNET will work only with very
+ * recent kernel (2.3.99-pre6 and up).
+ * 
+ * The present implementation offer the following features :
+ *	o simple user interface using pppd
+ *	o efficient implementation (interface directly to PPP and IrTTP)
+ *	o addressing (you can specify the name of the IrNET recipient)
+ *	o multipoint operation (limited by IrLAP specification)
+ *	o information in /proc/net/irda/irnet
+ *	o IrNET events on /dev/irnet (for user space daemon)
+ *	o IrNET daemon (irnetd) to automatically handle incoming requests
+ *	o Windows 2000 compatibility (tested, but need more work)
+ * Currently missing :
+ *	o Lot's of testing (that's your job)
+ *	o Connection retries (may be too hard to do)
+ *	o Check pppd persist mode
+ *	o User space daemon (to automatically handle incoming requests)
+ *
+ * The setup is not currently the most easy, but this should get much
+ * better when everything will get integrated...
+ *
+ * Acknowledgements
+ * ----------------
+ * This module is based on :
+ *	o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras
+ *	o The IrLAN protocol (irlan_common/XXX) by Dag Brattli
+ *	o The IrSock interface (af_irda) by Dag Brattli
+ *	o Some other bits from the kernel and my drivers...
+ * Infinite thanks to those brave souls for providing the infrastructure
+ * upon which IrNET is built.
+ *
+ * Thanks to all my collegues in HP for helping me. In particular,
+ * thanks to Salil Pradhan and Bill Serra for W2k testing...
+ * Thanks to Luiz Magalhaes for irnetd and much testing...
+ *
+ * Thanks to Alan Cox for answering lot's of my stupid questions, and
+ * to Paul Mackerras answering my questions on how to best integrate
+ * IrNET and pppd.
+ *
+ * Jean II
+ *
+ * Note on some implementations choices...
+ * ------------------------------------
+ *	1) Direct interface vs tty/socket
+ * I could have used a tty interface to hook to ppp and use the full
+ * socket API to connect to IrDA. The code would have been easier to
+ * maintain, and maybe the code would have been smaller...
+ * Instead, we hook directly to ppp_generic and to IrTTP, which make
+ * things more complicated...
+ *
+ * The first reason is flexibility : this allow us to create IrNET
+ * instances on demand (no /dev/ircommX crap) and to allow linkname
+ * specification on pppd command line...
+ *
+ * Second reason is speed optimisation. If you look closely at the
+ * transmit and receive paths, you will notice that they are "super lean"
+ * (that's why they look ugly), with no function calls and as little data
+ * copy and modification as I could...
+ *
+ *	2) irnetd in user space
+ * irnetd is implemented in user space, which is necessary to call pppd.
+ * This also give maximum benefits in term of flexibility and customability,
+ * and allow to offer the event channel, useful for other stuff like debug.
+ *
+ * On the other hand, this require a loose coordination between the
+ * present module and irnetd. One critical area is how incoming request
+ * are handled.
+ * When irnet receive an incoming request, it send an event to irnetd and
+ * drop the incoming IrNET socket.
+ * irnetd start a pppd instance, which create a new IrNET socket. This new
+ * socket is then connected in the originating node to the pppd instance.
+ * At this point, in the originating node, the first socket is closed.
+ *
+ * I admit, this is a bit messy and waste some resources. The alternative
+ * is caching incoming socket, and that's also quite messy and waste
+ * resources.
+ * We also make connection time slower. For example, on a 115 kb/s link it
+ * adds 60ms to the connection time (770 ms). However, this is slower than
+ * the time it takes to fire up pppd on my P133...
+ *
+ *
+ * History :
+ * -------
+ *
+ * v1 - 15.5.00 - Jean II
+ *	o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint)
+ *	o control channel on /dev/irnet (set name/address)
+ *	o event channel on /dev/irnet (for user space daemon)
+ *
+ * v2 - 5.6.00 - Jean II
+ *	o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness...
+ *	o Add DISCONNECT_TO event and rename DISCONNECT_FROM.
+ *	o Set official device number alloaction on /dev/irnet
+ *
+ * v3 - 30.8.00 - Jean II
+ *	o Update to latest Linux-IrDA changes :
+ *		- queue_t => irda_queue_t
+ *	o Update to ppp-2.4.0 :
+ *		- move irda_irnet_connect from PPPIOCATTACH to TIOCSETD
+ *	o Add EXPIRE event (depend on new IrDA-Linux patch)
+ *	o Switch from `hashbin_remove' to `hashbin_remove_this' to fix
+ *	  a multilink bug... (depend on new IrDA-Linux patch)
+ *	o fix a self->daddr to self->raddr in irda_irnet_connect to fix
+ *	  another multilink bug (darn !)
+ *	o Remove LINKNAME_IOCTL cruft
+ *
+ * v3b - 31.8.00 - Jean II
+ *	o Dump discovery log at event channel startup
+ *
+ * v4 - 28.9.00 - Jean II
+ *	o Fix interaction between poll/select and dump discovery log
+ *	o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch)
+ *	o Add IRNET_NOANSWER_FROM event (mostly to help support)
+ *	o Release flow control in disconnect_indication
+ *	o Block packets while connecting (speed up connections)
+ *
+ * v5 - 11.01.01 - Jean II
+ *	o Init self->max_header_size, just in case...
+ *	o Set up ap->chan.hdrlen, to get zero copy on tx side working.
+ *	o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state
+ *		Thanks to Christian Gennerat for finding this bug !
+ *	---
+ *	o Declare the proper MTU/MRU that we can support
+ *		(but PPP doesn't read the MTU value :-()
+ *	o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid
+ *		disabling and enabling irq twice
+ *
+ * v6 - 31.05.01 - Jean II
+ *	o Print source address in Found, Discovery, Expiry & Request events
+ *	o Print requested source address in /proc/net/irnet
+ *	o Change control channel input. Allow multiple commands in one line.
+ *	o Add saddr command to change ap->rsaddr (and use that in IrDA)
+ *	---
+ *	o Make the IrDA connection procedure totally asynchronous.
+ *	  Heavy rewrite of the IAS query code and the whole connection
+ *	  procedure. Now, irnet_connect() no longer need to be called from
+ *	  a process context...
+ *	o Enable IrDA connect retries in ppp_irnet_send(). The good thing
+ *	  is that IrDA connect retries are directly driven by PPP LCP
+ *	  retries (we retry for each LCP packet), so that everything
+ *	  is transparently controlled from pppd lcp-max-configure.
+ *	o Add ttp_connect flag to prevent rentry on the connect procedure
+ *	o Test and fixups to eliminate side effects of retries
+ *
+ * v7 - 22.08.01 - Jean II
+ *	o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY"
+ *	o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the
+ *	  asynchronous IAS query, self->tsap is NULL when PPP send the
+ *	  first packet.  This was preventing "connect-delay 0" to work.
+ *	  Change the test in ppp_irnet_send() to self->ttp_connect.
+ *
+ * v8 - 1.11.01 - Jean II
+ *	o Tighten the use of self->ttp_connect and self->ttp_open to
+ *	  prevent various race conditions.
+ *	o Avoid leaking discovery log and skb
+ *	o Replace "self" with "server" in irnet_connect_indication() to
+ *	  better detect cut'n'paste error ;-)
+ *
+ * v9 - 29.11.01 - Jean II
+ *	o Fix event generation in disconnect indication that I broke in v8
+ *	  It was always generation "No-Answer" because I was testing ttp_open
+ *	  just after clearing it. *blush*.
+ *	o Use newly created irttp_listen() to fix potential crash when LAP
+ *	  destroyed before irnet module removed.
+ *
+ * v10 - 4.3.2 - Jean II
+ *	o When receiving a disconnect indication, don't reenable the
+ *	  PPP Tx queue, this will trigger a reconnect. Instead, close
+ *	  the channel, which will kill pppd...
+ *
+ * v11 - 20.3.02 - Jean II
+ *	o Oops ! v10 fix disabled IrNET retries and passive behaviour.
+ *	  Better fix in irnet_disconnect_indication() :
+ *	  - if connected, kill pppd via hangup.
+ *	  - if not connected, reenable ppp Tx, which trigger IrNET retry.
+ *
+ * v12 - 10.4.02 - Jean II
+ *	o Fix race condition in irnet_connect_indication().
+ *	  If the socket was already trying to connect, drop old connection
+ *	  and use new one only if acting as primary. See comments.
+ *
+ * v13 - 30.5.02 - Jean II
+ *	o Update module init code
+ *
+ * v14 - 20.2.03 - Jean II
+ *	o Add discovery hint bits in the control channel.
+ *	o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner
+ *
+ * v15 - 7.4.03 - Jean II
+ *	o Replace spin_lock_irqsave() with spin_lock_bh() so that we can
+ *	  use ppp_unit_number(). It's probably also better overall...
+ *	o Disable call to ppp_unregister_channel(), because we can't do it.
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/tty.h>
+#include <linux/proc_fs.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/netdevice.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/config.h>
+#include <linux/ctype.h>	/* isspace() */
+#include <asm/uaccess.h>
+#include <linux/init.h>
+
+#include <linux/ppp_defs.h>
+#include <linux/if_ppp.h>
+#include <linux/ppp_channel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+#include <net/irda/discovery.h>
+
+/***************************** OPTIONS *****************************/
+/*
+ * Define or undefine to compile or not some optional part of the
+ * IrNET driver...
+ * Note : the present defaults make sense, play with that at your
+ * own risk...
+ */
+/* IrDA side of the business... */
+#define DISCOVERY_NOMASK	/* To enable W2k compatibility... */
+#define ADVERTISE_HINT		/* Advertise IrLAN hint bit */
+#define ALLOW_SIMULT_CONNECT	/* This seem to work, cross fingers... */
+#define DISCOVERY_EVENTS	/* Query the discovery log to post events */
+#define INITIAL_DISCOVERY	/* Dump current discovery log as events */
+#undef STREAM_COMPAT		/* Not needed - potentially messy */
+#undef CONNECT_INDIC_KICK	/* Might mess IrDA, not needed */
+#undef FAIL_SEND_DISCONNECT	/* Might mess IrDA, not needed */
+#undef PASS_CONNECT_PACKETS	/* Not needed ? Safe */
+#undef MISSING_PPP_API		/* Stuff I wish I could do */
+
+/* PPP side of the business */
+#define BLOCK_WHEN_CONNECT	/* Block packets when connecting */
+#define CONNECT_IN_SEND		/* Retry IrDA connection procedure */
+#undef FLUSH_TO_PPP		/* Not sure about this one, let's play safe */
+#undef SECURE_DEVIRNET		/* Bah... */
+
+/****************************** DEBUG ******************************/
+
+/*
+ * This set of flags enable and disable all the various warning,
+ * error and debug message of this driver.
+ * Each section can be enabled and disabled independently
+ */
+/* In the PPP part */
+#define DEBUG_CTRL_TRACE	0	/* Control channel */
+#define DEBUG_CTRL_INFO		0	/* various info */
+#define DEBUG_CTRL_ERROR	1	/* problems */
+#define DEBUG_FS_TRACE		0	/* filesystem callbacks */
+#define DEBUG_FS_INFO		0	/* various info */
+#define DEBUG_FS_ERROR		1	/* problems */
+#define DEBUG_PPP_TRACE		0	/* PPP related functions */
+#define DEBUG_PPP_INFO		0	/* various info */
+#define DEBUG_PPP_ERROR		1	/* problems */
+#define DEBUG_MODULE_TRACE	0	/* module insertion/removal */
+#define DEBUG_MODULE_ERROR	1	/* problems */
+
+/* In the IrDA part */
+#define DEBUG_IRDA_SR_TRACE	0	/* IRDA subroutines */
+#define DEBUG_IRDA_SR_INFO	0	/* various info */
+#define DEBUG_IRDA_SR_ERROR	1	/* problems */
+#define DEBUG_IRDA_SOCK_TRACE	0	/* IRDA main socket functions */
+#define DEBUG_IRDA_SOCK_INFO	0	/* various info */
+#define DEBUG_IRDA_SOCK_ERROR	1	/* problems */
+#define DEBUG_IRDA_SERV_TRACE	0	/* The IrNET server */
+#define DEBUG_IRDA_SERV_INFO	0	/* various info */
+#define DEBUG_IRDA_SERV_ERROR	1	/* problems */
+#define DEBUG_IRDA_TCB_TRACE	0	/* IRDA IrTTP callbacks */
+#define DEBUG_IRDA_CB_INFO	0	/* various info */
+#define DEBUG_IRDA_CB_ERROR	1	/* problems */
+#define DEBUG_IRDA_OCB_TRACE	0	/* IRDA other callbacks */
+#define DEBUG_IRDA_OCB_INFO	0	/* various info */
+#define DEBUG_IRDA_OCB_ERROR	1	/* problems */
+
+#define DEBUG_ASSERT		0	/* Verify all assertions */
+
+/* 
+ * These are the macros we are using to actually print the debug
+ * statements. Don't look at it, it's ugly...
+ *
+ * One of the trick is that, as the DEBUG_XXX are constant, the
+ * compiler will optimise away the if() in all cases.
+ */
+/* All error messages (will show up in the normal logs) */
+#define DERROR(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_INFO "irnet: %s(): " format, __FUNCTION__ , ##args);}
+
+/* Normal debug message (will show up in /var/log/debug) */
+#define DEBUG(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: %s(): " format, __FUNCTION__ , ##args);}
+
+/* Entering a function (trace) */
+#define DENTER(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: -> %s" format, __FUNCTION__ , ##args);}
+
+/* Entering and exiting a function in one go (trace) */
+#define DPASS(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: <>%s" format, __FUNCTION__ , ##args);}
+
+/* Exiting a function (trace) */
+#define DEXIT(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: <-%s()" format, __FUNCTION__ , ##args);}
+
+/* Exit a function with debug */
+#define DRETURN(ret, dbg, args...) \
+	{DEXIT(dbg, ": " args);\
+	return ret; }
+
+/* Exit a function on failed condition */
+#define DABORT(cond, ret, dbg, args...) \
+	{if(cond) {\
+		DERROR(dbg, args);\
+		return ret; }}
+
+/* Invalid assertion, print out an error and exit... */
+#define DASSERT(cond, ret, dbg, args...) \
+	{if((DEBUG_ASSERT) && !(cond)) {\
+		DERROR(dbg, "Invalid assertion: " args);\
+		return ret; }}
+
+/************************ CONSTANTS & MACROS ************************/
+
+/* Paranoia */
+#define IRNET_MAGIC	0xB00754
+
+/* Number of control events in the control channel buffer... */
+#define IRNET_MAX_EVENTS	8	/* Should be more than enough... */
+
+/****************************** TYPES ******************************/
+
+/*
+ * This is the main structure where we store all the data pertaining to
+ * one instance of irnet.
+ * Note : in irnet functions, a pointer this structure is usually called
+ * "ap" or "self". If the code is borrowed from the IrDA stack, it tend
+ * to be called "self", and if it is borrowed from the PPP driver it is
+ * "ap". Apart from that, it's exactly the same structure ;-)
+ */
+typedef struct irnet_socket
+{
+  /* ------------------- Instance management ------------------- */
+  /* We manage a linked list of IrNET socket instances */
+  irda_queue_t		q;		/* Must be first - for hasbin */
+  int			magic;		/* Paranoia */
+
+  /* --------------------- FileSystem part --------------------- */
+  /* "pppd" interact directly with us on a /dev/ file */
+  struct file *		file;		/* File descriptor of this instance */
+  /* TTY stuff - to keep "pppd" happy */
+  struct termios	termios;	/* Various tty flags */
+  /* Stuff for the control channel */
+  int			event_index;	/* Last read in the event log */
+
+  /* ------------------------- PPP part ------------------------- */
+  /* We interface directly to the ppp_generic driver in the kernel */
+  int			ppp_open;	/* registered with ppp_generic */
+  struct ppp_channel	chan;		/* Interface to generic ppp layer */
+
+  int			mru;		/* Max size of PPP payload */
+  u32			xaccm[8];	/* Asynchronous character map (just */
+  u32			raccm;		/* to please pppd - dummy) */
+  unsigned int		flags;		/* PPP flags (compression, ...) */
+  unsigned int		rbits;		/* Unused receive flags ??? */
+
+  /* ------------------------ IrTTP part ------------------------ */
+  /* We create a pseudo "socket" over the IrDA tranport */
+  unsigned long		ttp_open;	/* Set when IrTTP is ready */
+  unsigned long		ttp_connect;	/* Set when IrTTP is connecting */
+  struct tsap_cb *	tsap;		/* IrTTP instance (the connection) */
+
+  char			rname[NICKNAME_MAX_LEN + 1];
+					/* IrDA nickname of destination */
+  __u32			rdaddr;		/* Requested peer IrDA address */
+  __u32			rsaddr;		/* Requested local IrDA address */
+  __u32			daddr;		/* actual peer IrDA address */
+  __u32			saddr;		/* my local IrDA address */
+  __u8			dtsap_sel;	/* Remote TSAP selector */
+  __u8			stsap_sel;	/* Local TSAP selector */
+
+  __u32			max_sdu_size_rx;/* Socket parameters used for IrTTP */
+  __u32			max_sdu_size_tx;
+  __u32			max_data_size;
+  __u8			max_header_size;
+  LOCAL_FLOW		tx_flow;	/* State of the Tx path in IrTTP */
+
+  /* ------------------- IrLMP and IrIAS part ------------------- */
+  /* Used for IrDA Discovery and socket name resolution */
+  void *		ckey;		/* IrLMP client handle */
+  __u16			mask;		/* Hint bits mask (filter discov.)*/
+  int			nslots;		/* Number of slots for discovery */
+
+  struct iriap_cb *	iriap;		/* Used to query remote IAS */
+  int			errno;		/* status of the IAS query */
+
+  /* -------------------- Discovery log part -------------------- */
+  /* Used by initial discovery on the control channel
+   * and by irnet_discover_daddr_and_lsap_sel() */
+  struct irda_device_info *discoveries;	/* Copy of the discovery log */
+  int			disco_index;	/* Last read in the discovery log */
+  int			disco_number;	/* Size of the discovery log */
+
+} irnet_socket;
+
+/*
+ * This is the various event that we will generate on the control channel
+ */
+typedef enum irnet_event
+{
+  IRNET_DISCOVER,		/* New IrNET node discovered */
+  IRNET_EXPIRE,			/* IrNET node expired */
+  IRNET_CONNECT_TO,		/* IrNET socket has connected to other node */
+  IRNET_CONNECT_FROM,		/* Other node has connected to IrNET socket */
+  IRNET_REQUEST_FROM,		/* Non satisfied connection request */
+  IRNET_NOANSWER_FROM,		/* Failed connection request */
+  IRNET_BLOCKED_LINK,		/* Link (IrLAP) is blocked for > 3s */
+  IRNET_DISCONNECT_FROM,	/* IrNET socket has disconnected */
+  IRNET_DISCONNECT_TO		/* Closing IrNET socket */
+} irnet_event;
+
+/*
+ * This is the storage for an event and its arguments
+ */
+typedef struct irnet_log
+{
+  irnet_event	event;
+  int		unit;
+  __u32		saddr;
+  __u32		daddr;
+  char		name[NICKNAME_MAX_LEN + 1];	/* 21 + 1 */
+  __u16_host_order hints;			/* Discovery hint bits */
+} irnet_log;
+
+/*
+ * This is the storage for all events and related stuff...
+ */
+typedef struct irnet_ctrl_channel
+{
+  irnet_log	log[IRNET_MAX_EVENTS];	/* Event log */
+  int		index;		/* Current index in log */
+  spinlock_t	spinlock;	/* Serialize access to the event log */
+  wait_queue_head_t	rwait;	/* processes blocked on read (or poll) */
+} irnet_ctrl_channel;
+
+/**************************** PROTOTYPES ****************************/
+/*
+ * Global functions of the IrNET module
+ * Note : we list here also functions called from one file to the other.
+ */
+
+/* -------------------------- IRDA PART -------------------------- */
+extern int
+	irda_irnet_create(irnet_socket *);	/* Initialise a IrNET socket */
+extern int
+	irda_irnet_connect(irnet_socket *);	/* Try to connect over IrDA */
+extern void
+	irda_irnet_destroy(irnet_socket *);	/* Teardown  a IrNET socket */
+extern int
+	irda_irnet_init(void);		/* Initialise IrDA part of IrNET */
+extern void
+	irda_irnet_cleanup(void);	/* Teardown IrDA part of IrNET */
+/* ---------------------------- MODULE ---------------------------- */
+extern int
+	irnet_init(void);		/* Initialise IrNET module */
+
+/**************************** VARIABLES ****************************/
+
+/* Control channel stuff - allocated in irnet_irda.h */
+extern struct irnet_ctrl_channel	irnet_events;
+
+#endif /* IRNET_H */
diff --git a/net/irda/irnet/irnet_irda.c b/net/irda/irnet/irnet_irda.c
new file mode 100644
index 00000000000..07ec326c71f
--- /dev/null
+++ b/net/irda/irnet/irnet_irda.c
@@ -0,0 +1,1866 @@
+/*
+ *	IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ *		Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file implement the IRDA interface of IrNET.
+ * Basically, we sit on top of IrTTP. We set up IrTTP, IrIAS properly,
+ * and exchange frames with IrTTP.
+ */
+
+#include "irnet_irda.h"		/* Private header */
+
+/************************* CONTROL CHANNEL *************************/
+/*
+ * When ppp is not active, /dev/irnet act as a control channel.
+ * Writing allow to set up the IrDA destination of the IrNET channel,
+ * and any application may be read events happening on IrNET...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Post an event to the control channel...
+ * Put the event in the log, and then wait all process blocked on read
+ * so they can read the log...
+ */
+static void
+irnet_post_event(irnet_socket *	ap,
+		 irnet_event	event,
+		 __u32		saddr,
+		 __u32		daddr,
+		 char *		name,
+		 __u16		hints)
+{
+  int			index;		/* In the log */
+
+  DENTER(CTRL_TRACE, "(ap=0x%p, event=%d, daddr=%08x, name=``%s'')\n",
+	 ap, event, daddr, name);
+
+  /* Protect this section via spinlock.
+   * Note : as we are the only event producer, we only need to exclude
+   * ourself when touching the log, which is nice and easy.
+   */
+  spin_lock_bh(&irnet_events.spinlock);
+
+  /* Copy the event in the log */
+  index = irnet_events.index;
+  irnet_events.log[index].event = event;
+  irnet_events.log[index].daddr = daddr;
+  irnet_events.log[index].saddr = saddr;
+  /* Try to copy IrDA nickname */
+  if(name)
+    strcpy(irnet_events.log[index].name, name);
+  else
+    irnet_events.log[index].name[0] = '\0';
+  /* Copy hints */
+  irnet_events.log[index].hints.word = hints;
+  /* Try to get ppp unit number */
+  if((ap != (irnet_socket *) NULL) && (ap->ppp_open))
+    irnet_events.log[index].unit = ppp_unit_number(&ap->chan);
+  else
+    irnet_events.log[index].unit = -1;
+
+  /* Increment the index
+   * Note that we increment the index only after the event is written,
+   * to make sure that the readers don't get garbage... */
+  irnet_events.index = (index + 1) % IRNET_MAX_EVENTS;
+
+  DEBUG(CTRL_INFO, "New event index is %d\n", irnet_events.index);
+
+  /* Spin lock end */
+  spin_unlock_bh(&irnet_events.spinlock);
+
+  /* Now : wake up everybody waiting for events... */
+  wake_up_interruptible_all(&irnet_events.rwait);
+
+  DEXIT(CTRL_TRACE, "\n");
+}
+
+/************************* IRDA SUBROUTINES *************************/
+/*
+ * These are a bunch of subroutines called from other functions
+ * down there, mostly common code or to improve readability...
+ *
+ * Note : we duplicate quite heavily some routines of af_irda.c,
+ * because our input structure (self) is quite different
+ * (struct irnet instead of struct irda_sock), which make sharing
+ * the same code impossible (at least, without templates).
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_open_tsap (self)
+ *
+ *    Open local Transport Service Access Point (TSAP)
+ *
+ * Create a IrTTP instance for us and set all the IrTTP callbacks.
+ */
+static inline int
+irnet_open_tsap(irnet_socket *	self)
+{
+  notify_t	notify;		/* Callback structure */
+
+  DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+  DABORT(self->tsap != NULL, -EBUSY, IRDA_SR_ERROR, "Already busy !\n");
+
+  /* Initialize IrTTP callbacks to be used by the IrDA stack */
+  irda_notify_init(&notify);
+  notify.connect_confirm	= irnet_connect_confirm;
+  notify.connect_indication	= irnet_connect_indication;
+  notify.disconnect_indication	= irnet_disconnect_indication;
+  notify.data_indication	= irnet_data_indication;
+  /*notify.udata_indication	= NULL;*/
+  notify.flow_indication	= irnet_flow_indication;
+  notify.status_indication	= irnet_status_indication;
+  notify.instance		= self;
+  strlcpy(notify.name, IRNET_NOTIFY_NAME, sizeof(notify.name));
+
+  /* Open an IrTTP instance */
+  self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT,
+			       &notify);	
+  DABORT(self->tsap == NULL, -ENOMEM,
+	 IRDA_SR_ERROR, "Unable to allocate TSAP !\n");
+
+  /* Remember which TSAP selector we actually got */
+  self->stsap_sel = self->tsap->stsap_sel;
+
+  DEXIT(IRDA_SR_TRACE, " - tsap=0x%p, sel=0x%X\n",
+	self->tsap, self->stsap_sel);
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_ias_to_tsap (self, result, value)
+ *
+ *    Examine an IAS object and extract TSAP
+ *
+ * We do an IAP query to find the TSAP associated with the IrNET service.
+ * When IrIAP pass us the result of the query, this function look at
+ * the return values to check for failures and extract the TSAP if
+ * possible.
+ * Also deallocate value
+ * The failure is in self->errno
+ * Return TSAP or -1
+ */
+static inline __u8
+irnet_ias_to_tsap(irnet_socket *	self,
+		  int			result,
+		  struct ias_value *	value)
+{
+  __u8	dtsap_sel = 0;		/* TSAP we are looking for */
+
+  DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+  /* By default, no error */
+  self->errno = 0;
+
+  /* Check if request succeeded */
+  switch(result)
+    {
+      /* Standard errors : service not available */
+    case IAS_CLASS_UNKNOWN:
+    case IAS_ATTRIB_UNKNOWN:
+      DEBUG(IRDA_SR_INFO, "IAS object doesn't exist ! (%d)\n", result);
+      self->errno = -EADDRNOTAVAIL;
+      break;
+
+      /* Other errors, most likely IrDA stack failure */
+    default :
+      DEBUG(IRDA_SR_INFO, "IAS query failed ! (%d)\n", result);
+      self->errno = -EHOSTUNREACH;
+      break;
+
+      /* Success : we got what we wanted */
+    case IAS_SUCCESS:
+      break;
+    }
+
+  /* Check what was returned to us */
+  if(value != NULL)
+    {
+      /* What type of argument have we got ? */
+      switch(value->type)
+	{
+	case IAS_INTEGER:
+	  DEBUG(IRDA_SR_INFO, "result=%d\n", value->t.integer);
+	  if(value->t.integer != -1)
+	    /* Get the remote TSAP selector */
+	    dtsap_sel = value->t.integer;
+	  else 
+	    self->errno = -EADDRNOTAVAIL;
+	  break;
+	default:
+	  self->errno = -EADDRNOTAVAIL;
+	  DERROR(IRDA_SR_ERROR, "bad type ! (0x%X)\n", value->type);
+	  break;
+	}
+
+      /* Cleanup */
+      irias_delete_value(value);
+    }
+  else	/* value == NULL */
+    {
+      /* Nothing returned to us - usually result != SUCCESS */
+      if(!(self->errno))
+	{
+	  DERROR(IRDA_SR_ERROR,
+		 "IrDA bug : result == SUCCESS && value == NULL\n");
+	  self->errno = -EHOSTUNREACH;
+	}
+    }
+  DEXIT(IRDA_SR_TRACE, "\n");
+
+  /* Return the TSAP */
+  return(dtsap_sel);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_find_lsap_sel (self)
+ *
+ *    Try to lookup LSAP selector in remote LM-IAS
+ *
+ * Basically, we start a IAP query, and then go to sleep. When the query
+ * return, irnet_getvalue_confirm will wake us up, and we can examine the
+ * result of the query...
+ * Note that in some case, the query fail even before we go to sleep,
+ * creating some races...
+ */
+static inline int
+irnet_find_lsap_sel(irnet_socket *	self)
+{
+  DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+  /* This should not happen */
+  DABORT(self->iriap, -EBUSY, IRDA_SR_ERROR, "busy with a previous query.\n");
+
+  /* Create an IAP instance, will be closed in irnet_getvalue_confirm() */
+  self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+			   irnet_getvalue_confirm);
+
+  /* Treat unexpected signals as disconnect */
+  self->errno = -EHOSTUNREACH;
+
+  /* Query remote LM-IAS */
+  iriap_getvaluebyclass_request(self->iriap, self->rsaddr, self->daddr,
+				IRNET_SERVICE_NAME, IRNET_IAS_VALUE);
+
+  /* The above request is non-blocking.
+   * After a while, IrDA will call us back in irnet_getvalue_confirm()
+   * We will then call irnet_ias_to_tsap() and finish the
+   * connection procedure */
+
+  DEXIT(IRDA_SR_TRACE, "\n");
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_connect_tsap (self)
+ *
+ *    Initialise the TTP socket and initiate TTP connection
+ *
+ */
+static inline int
+irnet_connect_tsap(irnet_socket *	self)
+{
+  int		err;
+
+  DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+  /* Open a local TSAP (an IrTTP instance) */
+  err = irnet_open_tsap(self);
+  if(err != 0)
+    {
+      clear_bit(0, &self->ttp_connect);
+      DERROR(IRDA_SR_ERROR, "connect aborted!\n");
+      return(err);
+    }
+
+  /* Connect to remote device */
+  err = irttp_connect_request(self->tsap, self->dtsap_sel, 
+			      self->rsaddr, self->daddr, NULL, 
+			      self->max_sdu_size_rx, NULL);
+  if(err != 0)
+    {
+      clear_bit(0, &self->ttp_connect);
+      DERROR(IRDA_SR_ERROR, "connect aborted!\n");
+      return(err);
+    }
+
+  /* The above call is non-blocking.
+   * After a while, the IrDA stack will either call us back in
+   * irnet_connect_confirm() or irnet_disconnect_indication()
+   * See you there ;-) */
+
+  DEXIT(IRDA_SR_TRACE, "\n");
+  return(err);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discover_next_daddr (self)
+ *
+ *    Query the IrNET TSAP of the next device in the log.
+ *
+ * Used in the TSAP discovery procedure.
+ */
+static inline int
+irnet_discover_next_daddr(irnet_socket *	self)
+{
+  /* Close the last instance of IrIAP, and open a new one.
+   * We can't reuse the IrIAP instance in the IrIAP callback */
+  if(self->iriap)
+    {
+      iriap_close(self->iriap);
+      self->iriap = NULL;
+    }
+  /* Create a new IAP instance */
+  self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self,
+			   irnet_discovervalue_confirm);
+  if(self->iriap == NULL)
+    return -ENOMEM;
+
+  /* Next discovery - before the call to avoid races */
+  self->disco_index++;
+
+  /* Check if we have one more address to try */
+  if(self->disco_index < self->disco_number)
+    {
+      /* Query remote LM-IAS */
+      iriap_getvaluebyclass_request(self->iriap,
+				    self->discoveries[self->disco_index].saddr,
+				    self->discoveries[self->disco_index].daddr,
+				    IRNET_SERVICE_NAME, IRNET_IAS_VALUE);
+      /* The above request is non-blocking.
+       * After a while, IrDA will call us back in irnet_discovervalue_confirm()
+       * We will then call irnet_ias_to_tsap() and come back here again... */
+      return(0);
+    }
+  else
+    return(1);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discover_daddr_and_lsap_sel (self)
+ *
+ *    This try to find a device with the requested service.
+ *
+ * Initiate a TSAP discovery procedure.
+ * It basically look into the discovery log. For each address in the list,
+ * it queries the LM-IAS of the device to find if this device offer
+ * the requested service.
+ * If there is more than one node supporting the service, we complain
+ * to the user (it should move devices around).
+ * If we find one node which have the requested TSAP, we connect to it.
+ *
+ * This function just start the whole procedure. It request the discovery
+ * log and submit the first IAS query.
+ * The bulk of the job is handled in irnet_discovervalue_confirm()
+ *
+ * Note : this procedure fails if there is more than one device in range
+ * on the same dongle, because IrLMP doesn't disconnect the LAP when the
+ * last LSAP is closed. Moreover, we would need to wait the LAP
+ * disconnection...
+ */
+static inline int
+irnet_discover_daddr_and_lsap_sel(irnet_socket *	self)
+{
+  int	ret;
+
+  DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+  /* Ask lmp for the current discovery log */
+  self->discoveries = irlmp_get_discoveries(&self->disco_number, self->mask,
+					    DISCOVERY_DEFAULT_SLOTS);
+
+  /* Check if the we got some results */
+  if(self->discoveries == NULL)
+    {
+      self->disco_number = -1;
+      clear_bit(0, &self->ttp_connect);
+      DRETURN(-ENETUNREACH, IRDA_SR_INFO, "No Cachelog...\n");
+    }
+  DEBUG(IRDA_SR_INFO, "Got the log (0x%p), size is %d\n",
+	self->discoveries, self->disco_number);
+
+  /* Start with the first discovery */
+  self->disco_index = -1;
+  self->daddr = DEV_ADDR_ANY;
+
+  /* This will fail if the log is empty - this is non-blocking */
+  ret = irnet_discover_next_daddr(self);
+  if(ret)
+    {
+      /* Close IAP */
+      if(self->iriap)
+	iriap_close(self->iriap);
+      self->iriap = NULL;
+
+      /* Cleanup our copy of the discovery log */
+      kfree(self->discoveries);
+      self->discoveries = NULL;
+
+      clear_bit(0, &self->ttp_connect);
+      DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n");
+    }
+
+  /* Follow me in irnet_discovervalue_confirm() */
+
+  DEXIT(IRDA_SR_TRACE, "\n");
+  return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_dname_to_daddr (self)
+ *
+ *    Convert an IrDA nickname to a valid IrDA address
+ *
+ * It basically look into the discovery log until there is a match.
+ */
+static inline int
+irnet_dname_to_daddr(irnet_socket *	self)
+{
+  struct irda_device_info *discoveries;	/* Copy of the discovery log */
+  int	number;			/* Number of nodes in the log */
+  int	i;
+
+  DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self);
+
+  /* Ask lmp for the current discovery log */
+  discoveries = irlmp_get_discoveries(&number, 0xffff,
+				      DISCOVERY_DEFAULT_SLOTS);
+  /* Check if the we got some results */
+  if(discoveries == NULL)
+    DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n");
+
+  /* 
+   * Now, check all discovered devices (if any), and connect
+   * client only about the services that the client is
+   * interested in...
+   */
+  for(i = 0; i < number; i++)
+    {
+      /* Does the name match ? */
+      if(!strncmp(discoveries[i].info, self->rname, NICKNAME_MAX_LEN))
+	{
+	  /* Yes !!! Get it.. */
+	  self->daddr = discoveries[i].daddr;
+	  DEBUG(IRDA_SR_INFO, "discovered device ``%s'' at address 0x%08x.\n",
+		self->rname, self->daddr);
+	  kfree(discoveries);
+	  DEXIT(IRDA_SR_TRACE, "\n");
+	  return 0;
+	}
+    }
+  /* No luck ! */
+  DEBUG(IRDA_SR_INFO, "cannot discover device ``%s'' !!!\n", self->rname);
+  kfree(discoveries);
+  return(-EADDRNOTAVAIL);
+}
+
+
+/************************* SOCKET ROUTINES *************************/
+/*
+ * This are the main operations on IrNET sockets, basically to create
+ * and destroy IrNET sockets. These are called from the PPP part...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Create a IrNET instance : just initialise some parameters...
+ */
+int
+irda_irnet_create(irnet_socket *	self)
+{
+  DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self);
+
+  self->magic = IRNET_MAGIC;	/* Paranoia */
+
+  self->ttp_open = 0;		/* Prevent higher layer from accessing IrTTP */
+  self->ttp_connect = 0;	/* Not connecting yet */
+  self->rname[0] = '\0';	/* May be set via control channel */
+  self->rdaddr = DEV_ADDR_ANY;	/* May be set via control channel */
+  self->rsaddr = DEV_ADDR_ANY;	/* May be set via control channel */
+  self->daddr = DEV_ADDR_ANY;	/* Until we get connected */
+  self->saddr = DEV_ADDR_ANY;	/* Until we get connected */
+  self->max_sdu_size_rx = TTP_SAR_UNBOUND;
+
+  /* Register as a client with IrLMP */
+  self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
+#ifdef DISCOVERY_NOMASK
+  self->mask = 0xffff;		/* For W2k compatibility */
+#else /* DISCOVERY_NOMASK */
+  self->mask = irlmp_service_to_hint(S_LAN);
+#endif /* DISCOVERY_NOMASK */
+  self->tx_flow = FLOW_START;	/* Flow control from IrTTP */
+
+  DEXIT(IRDA_SOCK_TRACE, "\n");
+  return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Connect to the other side :
+ *	o convert device name to an address
+ *	o find the socket number (dlsap)
+ *	o Establish the connection
+ *
+ * Note : We no longer mimic af_irda. The IAS query for finding the TSAP
+ * is done asynchronously, like the TTP connection. This allow us to
+ * call this function from any context (not only process).
+ * The downside is that following what's happening in there is tricky
+ * because it involve various functions all over the place...
+ */
+int
+irda_irnet_connect(irnet_socket *	self)
+{
+  int		err;
+
+  DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self);
+
+  /* Check if we are already trying to connect.
+   * Because irda_irnet_connect() can be called directly by pppd plus
+   * packet retries in ppp_generic and connect may take time, plus we may
+   * race with irnet_connect_indication(), we need to be careful there... */
+  if(test_and_set_bit(0, &self->ttp_connect))
+    DRETURN(-EBUSY, IRDA_SOCK_INFO, "Already connecting...\n");
+  if((self->iriap != NULL) || (self->tsap != NULL))
+    DERROR(IRDA_SOCK_ERROR, "Socket not cleaned up...\n");
+
+  /* Insert ourselves in the hashbin so that the IrNET server can find us.
+   * Notes : 4th arg is string of 32 char max and must be null terminated
+   *	     When 4th arg is used (string), 3rd arg isn't (int)
+   *	     Can't re-insert (MUST remove first) so check for that... */
+  if((irnet_server.running) && (self->q.q_next == NULL))
+    {
+      spin_lock_bh(&irnet_server.spinlock);
+      hashbin_insert(irnet_server.list, (irda_queue_t *) self, 0, self->rname);
+      spin_unlock_bh(&irnet_server.spinlock);
+      DEBUG(IRDA_SOCK_INFO, "Inserted ``%s'' in hashbin...\n", self->rname);
+    }
+
+  /* If we don't have anything (no address, no name) */
+  if((self->rdaddr == DEV_ADDR_ANY) && (self->rname[0] == '\0'))
+    {
+      /* Try to find a suitable address */
+      if((err = irnet_discover_daddr_and_lsap_sel(self)) != 0)
+	DRETURN(err, IRDA_SOCK_INFO, "auto-connect failed!\n");
+      /* In most cases, the call above is non-blocking */
+    }
+  else
+    {
+      /* If we have only the name (no address), try to get an address */
+      if(self->rdaddr == DEV_ADDR_ANY)
+	{
+	  if((err = irnet_dname_to_daddr(self)) != 0)
+	    DRETURN(err, IRDA_SOCK_INFO, "name connect failed!\n");
+	}
+      else
+	/* Use the requested destination address */
+	self->daddr = self->rdaddr;
+
+      /* Query remote LM-IAS to find LSAP selector */
+      irnet_find_lsap_sel(self);
+      /* The above call is non blocking */
+    }
+
+  /* At this point, we are waiting for the IrDA stack to call us back,
+   * or we have already failed.
+   * We will finish the connection procedure in irnet_connect_tsap().
+   */
+  DEXIT(IRDA_SOCK_TRACE, "\n");
+  return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_irnet_destroy(self)
+ *
+ *    Destroy irnet instance
+ *
+ * Note : this need to be called from a process context.
+ */
+void
+irda_irnet_destroy(irnet_socket *	self)
+{
+  DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self);
+  if(self == NULL)
+    return;
+
+  /* Remove ourselves from hashbin (if we are queued in hashbin)
+   * Note : `irnet_server.running' protect us from calls in hashbin_delete() */
+  if((irnet_server.running) && (self->q.q_next != NULL))
+    {
+      struct irnet_socket *	entry;
+      DEBUG(IRDA_SOCK_INFO, "Removing from hash..\n");
+      spin_lock_bh(&irnet_server.spinlock);
+      entry = hashbin_remove_this(irnet_server.list, (irda_queue_t *) self);
+      self->q.q_next = NULL;
+      spin_unlock_bh(&irnet_server.spinlock);
+      DASSERT(entry == self, , IRDA_SOCK_ERROR, "Can't remove from hash.\n");
+    }
+
+  /* If we were connected, post a message */
+  if(test_bit(0, &self->ttp_open))
+    {
+      /* Note : as the disconnect comes from ppp_generic, the unit number
+       * doesn't exist anymore when we post the event, so we need to pass
+       * NULL as the first arg... */
+      irnet_post_event(NULL, IRNET_DISCONNECT_TO,
+		       self->saddr, self->daddr, self->rname, 0);
+    }
+
+  /* Prevent various IrDA callbacks from messing up things
+   * Need to be first */
+  clear_bit(0, &self->ttp_connect);
+
+  /* Prevent higher layer from accessing IrTTP */
+  clear_bit(0, &self->ttp_open);
+
+  /* Unregister with IrLMP */
+  irlmp_unregister_client(self->ckey);
+
+  /* Unregister with LM-IAS */
+  if(self->iriap)
+    { 
+      iriap_close(self->iriap);
+      self->iriap = NULL;
+    }
+
+  /* Cleanup eventual discoveries from connection attempt or control channel */
+  if(self->discoveries != NULL)
+    {
+      /* Cleanup our copy of the discovery log */
+      kfree(self->discoveries);
+      self->discoveries = NULL;
+    }
+
+  /* Close our IrTTP connection */
+  if(self->tsap)
+    {
+      DEBUG(IRDA_SOCK_INFO, "Closing our TTP connection.\n");
+      irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+      irttp_close_tsap(self->tsap);
+      self->tsap = NULL;
+    }
+  self->stsap_sel = 0;
+
+  DEXIT(IRDA_SOCK_TRACE, "\n");
+  return;
+}
+
+
+/************************** SERVER SOCKET **************************/
+/*
+ * The IrNET service is composed of one server socket and a variable
+ * number of regular IrNET sockets. The server socket is supposed to
+ * handle incoming connections and redirect them to one IrNET sockets.
+ * It's a superset of the regular IrNET socket, but has a very distinct
+ * behaviour...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_daddr_to_dname (self)
+ *
+ *    Convert an IrDA address to a IrDA nickname
+ *
+ * It basically look into the discovery log until there is a match.
+ */
+static inline int
+irnet_daddr_to_dname(irnet_socket *	self)
+{
+  struct irda_device_info *discoveries;	/* Copy of the discovery log */
+  int	number;			/* Number of nodes in the log */
+  int	i;
+
+  DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self);
+
+  /* Ask lmp for the current discovery log */
+  discoveries = irlmp_get_discoveries(&number, 0xffff,
+				      DISCOVERY_DEFAULT_SLOTS);
+  /* Check if the we got some results */
+  if (discoveries == NULL)
+    DRETURN(-ENETUNREACH, IRDA_SERV_INFO, "Cachelog empty...\n");
+
+  /* Now, check all discovered devices (if any) */
+  for(i = 0; i < number; i++)
+    {
+      /* Does the name match ? */
+      if(discoveries[i].daddr == self->daddr)
+	{
+	  /* Yes !!! Get it.. */
+	  strlcpy(self->rname, discoveries[i].info, sizeof(self->rname));
+	  self->rname[NICKNAME_MAX_LEN + 1] = '\0';
+	  DEBUG(IRDA_SERV_INFO, "Device 0x%08x is in fact ``%s''.\n",
+		self->daddr, self->rname);
+	  kfree(discoveries);
+	  DEXIT(IRDA_SERV_TRACE, "\n");
+	  return 0;
+	}
+    }
+  /* No luck ! */
+  DEXIT(IRDA_SERV_INFO, ": cannot discover device 0x%08x !!!\n", self->daddr);
+  kfree(discoveries);
+  return(-EADDRNOTAVAIL);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_find_socket (self)
+ *
+ *    Find the correct IrNET socket
+ *
+ * Look into the list of IrNET sockets and finds one with the right
+ * properties...
+ */
+static inline irnet_socket *
+irnet_find_socket(irnet_socket *	self)
+{
+  irnet_socket *	new = (irnet_socket *) NULL;
+  int			err;
+
+  DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self);
+
+  /* Get the addresses of the requester */
+  self->daddr = irttp_get_daddr(self->tsap);
+  self->saddr = irttp_get_saddr(self->tsap);
+
+  /* Try to get the IrDA nickname of the requester */
+  err = irnet_daddr_to_dname(self);
+
+  /* Protect access to the instance list */
+  spin_lock_bh(&irnet_server.spinlock);
+
+  /* So now, try to get an socket having specifically
+   * requested that nickname */
+  if(err == 0)
+    {
+      new = (irnet_socket *) hashbin_find(irnet_server.list,
+					  0, self->rname);
+      if(new)
+	DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches rname ``%s''.\n",
+	      new, new->rname);
+    }
+
+  /* If no name matches, try to find an socket by the destination address */
+  /* It can be either the requested destination address (set via the
+   * control channel), or the current destination address if the
+   * socket is in the middle of a connection request */
+  if(new == (irnet_socket *) NULL)
+    {
+      new = (irnet_socket *) hashbin_get_first(irnet_server.list);
+      while(new !=(irnet_socket *) NULL)
+	{
+	  /* Does it have the same address ? */
+	  if((new->rdaddr == self->daddr) || (new->daddr == self->daddr))
+	    {
+	      /* Yes !!! Get it.. */
+	      DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches daddr %#08x.\n",
+		    new, self->daddr);
+	      break;
+	    }
+	  new = (irnet_socket *) hashbin_get_next(irnet_server.list);
+	}
+    }
+
+  /* If we don't have any socket, get the first unconnected socket */
+  if(new == (irnet_socket *) NULL)
+    {
+      new = (irnet_socket *) hashbin_get_first(irnet_server.list);
+      while(new !=(irnet_socket *) NULL)
+	{
+	  /* Is it available ? */
+	  if(!(test_bit(0, &new->ttp_open)) && (new->rdaddr == DEV_ADDR_ANY) &&
+	     (new->rname[0] == '\0') && (new->ppp_open))
+	    {
+	      /* Yes !!! Get it.. */
+	      DEBUG(IRDA_SERV_INFO, "Socket 0x%p is free.\n",
+		    new);
+	      break;
+	    }
+	  new = (irnet_socket *) hashbin_get_next(irnet_server.list);
+	}
+    }
+
+  /* Spin lock end */
+  spin_unlock_bh(&irnet_server.spinlock);
+
+  DEXIT(IRDA_SERV_TRACE, " - new = 0x%p\n", new);
+  return new;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_connect_socket (self)
+ *
+ *    Connect an incoming connection to the socket
+ *
+ */
+static inline int
+irnet_connect_socket(irnet_socket *	server,
+		     irnet_socket *	new,
+		     struct qos_info *	qos,
+		     __u32		max_sdu_size,
+		     __u8		max_header_size)
+{
+  DENTER(IRDA_SERV_TRACE, "(server=0x%p, new=0x%p)\n",
+	 server, new);
+
+  /* Now attach up the new socket */
+  new->tsap = irttp_dup(server->tsap, new);
+  DABORT(new->tsap == NULL, -1, IRDA_SERV_ERROR, "dup failed!\n");
+
+  /* Set up all the relevant parameters on the new socket */
+  new->stsap_sel = new->tsap->stsap_sel;
+  new->dtsap_sel = new->tsap->dtsap_sel;
+  new->saddr = irttp_get_saddr(new->tsap);
+  new->daddr = irttp_get_daddr(new->tsap);
+
+  new->max_header_size = max_header_size;
+  new->max_sdu_size_tx = max_sdu_size;
+  new->max_data_size   = max_sdu_size;
+#ifdef STREAM_COMPAT
+  /* If we want to receive "stream sockets" */
+  if(max_sdu_size == 0)
+    new->max_data_size = irttp_get_max_seg_size(new->tsap);
+#endif /* STREAM_COMPAT */
+
+  /* Clean up the original one to keep it in listen state */
+  irttp_listen(server->tsap);
+
+  /* Send a connection response on the new socket */
+  irttp_connect_response(new->tsap, new->max_sdu_size_rx, NULL);
+
+  /* Allow PPP to send its junk over the new socket... */
+  set_bit(0, &new->ttp_open);
+
+  /* Not connecting anymore, and clean up last possible remains
+   * of connection attempts on the socket */
+  clear_bit(0, &new->ttp_connect);
+  if(new->iriap)
+    {
+      iriap_close(new->iriap);
+      new->iriap = NULL;
+    }
+  if(new->discoveries != NULL)
+    {
+      kfree(new->discoveries);
+      new->discoveries = NULL;
+    }
+
+#ifdef CONNECT_INDIC_KICK
+  /* As currently we don't block packets in ppp_irnet_send() while passive,
+   * this is not really needed...
+   * Also, not doing it give IrDA a chance to finish the setup properly
+   * before being swamped with packets... */
+  ppp_output_wakeup(&new->chan);
+#endif /* CONNECT_INDIC_KICK */
+
+  /* Notify the control channel */
+  irnet_post_event(new, IRNET_CONNECT_FROM,
+		   new->saddr, new->daddr, server->rname, 0);
+
+  DEXIT(IRDA_SERV_TRACE, "\n");
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_disconnect_server (self)
+ *
+ *    Cleanup the server socket when the incoming connection abort
+ *
+ */
+static inline void
+irnet_disconnect_server(irnet_socket *	self,
+			struct sk_buff *skb)
+{
+  DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self);
+
+  /* Put the received packet in the black hole */
+  kfree_skb(skb);
+
+#ifdef FAIL_SEND_DISCONNECT
+  /* Tell the other party we don't want to be connected */
+  /* Hum... Is it the right thing to do ? And do we need to send
+   * a connect response before ? It looks ok without this... */
+  irttp_disconnect_request(self->tsap, NULL, P_NORMAL);
+#endif /* FAIL_SEND_DISCONNECT */
+
+  /* Notify the control channel (see irnet_find_socket()) */
+  irnet_post_event(NULL, IRNET_REQUEST_FROM,
+		   self->saddr, self->daddr, self->rname, 0);
+
+  /* Clean up the server to keep it in listen state */
+  irttp_listen(self->tsap);
+
+  DEXIT(IRDA_SERV_TRACE, "\n");
+  return;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_setup_server (self)
+ *
+ *    Create a IrTTP server and set it up...
+ *
+ * Register the IrLAN hint bit, create a IrTTP instance for us,
+ * set all the IrTTP callbacks and create an IrIAS entry...
+ */
+static inline int
+irnet_setup_server(void)
+{
+  __u16		hints;
+
+  DENTER(IRDA_SERV_TRACE, "()\n");
+
+  /* Initialise the regular socket part of the server */
+  irda_irnet_create(&irnet_server.s);
+
+  /* Open a local TSAP (an IrTTP instance) for the server */
+  irnet_open_tsap(&irnet_server.s);
+
+  /* PPP part setup */
+  irnet_server.s.ppp_open = 0;
+  irnet_server.s.chan.private = NULL;
+  irnet_server.s.file = NULL;
+
+  /* Get the hint bit corresponding to IrLAN */
+  /* Note : we overload the IrLAN hint bit. As it is only a "hint", and as
+   * we provide roughly the same functionality as IrLAN, this is ok.
+   * In fact, the situation is similar as JetSend overloading the Obex hint
+   */
+  hints = irlmp_service_to_hint(S_LAN);
+
+#ifdef ADVERTISE_HINT
+  /* Register with IrLMP as a service (advertise our hint bit) */
+  irnet_server.skey = irlmp_register_service(hints);
+#endif /* ADVERTISE_HINT */
+
+  /* Register with LM-IAS (so that people can connect to us) */
+  irnet_server.ias_obj = irias_new_object(IRNET_SERVICE_NAME, jiffies);
+  irias_add_integer_attrib(irnet_server.ias_obj, IRNET_IAS_VALUE, 
+			   irnet_server.s.stsap_sel, IAS_KERNEL_ATTR);
+  irias_insert_object(irnet_server.ias_obj);
+
+#ifdef DISCOVERY_EVENTS
+  /* Tell IrLMP we want to be notified of newly discovered nodes */
+  irlmp_update_client(irnet_server.s.ckey, hints,
+		      irnet_discovery_indication, irnet_expiry_indication,
+		      (void *) &irnet_server.s);
+#endif
+
+  DEXIT(IRDA_SERV_TRACE, " - self=0x%p\n", &irnet_server.s);
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_destroy_server (self)
+ *
+ *    Destroy the IrTTP server...
+ *
+ * Reverse of the previous function...
+ */
+static inline void
+irnet_destroy_server(void)
+{
+  DENTER(IRDA_SERV_TRACE, "()\n");
+
+#ifdef ADVERTISE_HINT
+  /* Unregister with IrLMP */
+  irlmp_unregister_service(irnet_server.skey);
+#endif /* ADVERTISE_HINT */
+
+  /* Unregister with LM-IAS */
+  if(irnet_server.ias_obj)
+    irias_delete_object(irnet_server.ias_obj);
+
+  /* Cleanup the socket part */
+  irda_irnet_destroy(&irnet_server.s);
+
+  DEXIT(IRDA_SERV_TRACE, "\n");
+  return;
+}
+
+
+/************************ IRDA-TTP CALLBACKS ************************/
+/*
+ * When we create a IrTTP instance, we pass to it a set of callbacks
+ * that IrTTP will call in case of various events.
+ * We take care of those events here.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_data_indication (instance, sap, skb)
+ *
+ *    Received some data from TinyTP. Just queue it on the receive queue
+ *
+ */
+static int
+irnet_data_indication(void *	instance,
+		      void *	sap,
+		      struct sk_buff *skb)
+{
+  irnet_socket *	ap = (irnet_socket *) instance;
+  unsigned char *	p;
+  int			code = 0;
+
+  DENTER(IRDA_TCB_TRACE, "(self/ap=0x%p, skb=0x%p)\n",
+	 ap, skb);
+  DASSERT(skb != NULL, 0, IRDA_CB_ERROR, "skb is NULL !!!\n");
+
+  /* Check is ppp is ready to receive our packet */
+  if(!ap->ppp_open)
+    {
+      DERROR(IRDA_CB_ERROR, "PPP not ready, dropping packet...\n");
+      /* When we return error, TTP will need to requeue the skb and
+       * will stop the sender. IrTTP will stall until we send it a
+       * flow control request... */
+      return -ENOMEM;
+    }
+
+  /* strip address/control field if present */
+  p = skb->data;
+  if((p[0] == PPP_ALLSTATIONS) && (p[1] == PPP_UI))
+    {
+      /* chop off address/control */
+      if(skb->len < 3)
+	goto err_exit;
+      p = skb_pull(skb, 2);
+    }
+
+  /* decompress protocol field if compressed */
+  if(p[0] & 1)
+    {
+      /* protocol is compressed */
+      skb_push(skb, 1)[0] = 0;
+    }
+  else
+    if(skb->len < 2)
+      goto err_exit;
+
+  /* pass to generic ppp layer */
+  /* Note : how do I know if ppp can accept or not the packet ? This is
+   * essential if I want to manage flow control smoothly... */
+  ppp_input(&ap->chan, skb);
+
+  DEXIT(IRDA_TCB_TRACE, "\n");
+  return 0;
+
+ err_exit:
+  DERROR(IRDA_CB_ERROR, "Packet too small, dropping...\n");
+  kfree_skb(skb);
+  ppp_input_error(&ap->chan, code);
+  return 0;	/* Don't return an error code, only for flow control... */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_disconnect_indication (instance, sap, reason, skb)
+ *
+ *    Connection has been closed. Chech reason to find out why
+ *
+ * Note : there are many cases where we come here :
+ *	o attempted to connect, timeout
+ *	o connected, link is broken, LAP has timeout
+ *	o connected, other side close the link
+ *	o connection request on the server not handled
+ */
+static void
+irnet_disconnect_indication(void *	instance,
+			    void *	sap, 
+			    LM_REASON	reason,
+			    struct sk_buff *skb)
+{
+  irnet_socket *	self = (irnet_socket *) instance;
+  int			test_open;
+  int			test_connect;
+
+  DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self);
+  DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n");
+
+  /* Don't care about it, but let's not leak it */
+  if(skb)
+    dev_kfree_skb(skb);
+
+  /* Prevent higher layer from accessing IrTTP */
+  test_open = test_and_clear_bit(0, &self->ttp_open);
+  /* Not connecting anymore...
+   * (note : TSAP is open, so IAP callbacks are no longer pending...) */
+  test_connect = test_and_clear_bit(0, &self->ttp_connect);
+
+  /* If both self->ttp_open and self->ttp_connect are NULL, it mean that we
+   * have a race condition with irda_irnet_destroy() or
+   * irnet_connect_indication(), so don't mess up tsap...
+   */
+  if(!(test_open || test_connect))
+    {
+      DERROR(IRDA_CB_ERROR, "Race condition detected...\n");
+      return;
+    }
+
+  /* If we were active, notify the control channel */
+  if(test_open)
+    irnet_post_event(self, IRNET_DISCONNECT_FROM,
+		     self->saddr, self->daddr, self->rname, 0);
+  else
+    /* If we were trying to connect, notify the control channel */
+    if((self->tsap) && (self != &irnet_server.s))
+      irnet_post_event(self, IRNET_NOANSWER_FROM,
+		       self->saddr, self->daddr, self->rname, 0);
+
+  /* Close our IrTTP connection, cleanup tsap */
+  if((self->tsap) && (self != &irnet_server.s))
+    {
+      DEBUG(IRDA_CB_INFO, "Closing our TTP connection.\n");
+      irttp_close_tsap(self->tsap);
+      self->tsap = NULL;
+    }
+  /* Cleanup the socket in case we want to reconnect in ppp_output_wakeup() */
+  self->stsap_sel = 0;
+  self->daddr = DEV_ADDR_ANY;
+  self->tx_flow = FLOW_START;
+
+  /* Deal with the ppp instance if it's still alive */
+  if(self->ppp_open)
+    {
+      if(test_open)
+	{
+#ifdef MISSING_PPP_API
+	  /* ppp_unregister_channel() wants a user context, which we
+	   * are guaranteed to NOT have here. What are we supposed
+	   * to do here ? Jean II */
+	  /* If we were connected, cleanup & close the PPP channel,
+	   * which will kill pppd (hangup) and the rest */
+	  ppp_unregister_channel(&self->chan);
+	  self->ppp_open = 0;
+#endif
+	}
+      else
+	{
+	  /* If we were trying to connect, flush (drain) ppp_generic
+	   * Tx queue (most often we have blocked it), which will
+	   * trigger an other attempt to connect. If we are passive,
+	   * this will empty the Tx queue after last try. */
+	  ppp_output_wakeup(&self->chan);
+	}
+    }
+
+  DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_connect_confirm (instance, sap, qos, max_sdu_size, skb)
+ *
+ *    Connections has been confirmed by the remote device
+ *
+ */
+static void
+irnet_connect_confirm(void *	instance,
+		      void *	sap, 
+		      struct qos_info *qos,
+		      __u32	max_sdu_size,
+		      __u8	max_header_size, 
+		      struct sk_buff *skb)
+{
+  irnet_socket *	self = (irnet_socket *) instance;
+
+  DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self);
+
+  /* Check if socket is closing down (via irda_irnet_destroy()) */
+  if(! test_bit(0, &self->ttp_connect))
+    {
+      DERROR(IRDA_CB_ERROR, "Socket no longer connecting. Ouch !\n");
+      return;
+    }
+
+  /* How much header space do we need to reserve */
+  self->max_header_size = max_header_size;
+
+  /* IrTTP max SDU size in transmit direction */
+  self->max_sdu_size_tx = max_sdu_size;
+  self->max_data_size = max_sdu_size;
+#ifdef STREAM_COMPAT
+  if(max_sdu_size == 0)
+    self->max_data_size = irttp_get_max_seg_size(self->tsap);
+#endif /* STREAM_COMPAT */
+
+  /* At this point, IrLMP has assigned our source address */
+  self->saddr = irttp_get_saddr(self->tsap);
+
+  /* Allow higher layer to access IrTTP */
+  set_bit(0, &self->ttp_open);
+  clear_bit(0, &self->ttp_connect);	/* Not racy, IrDA traffic is serial */
+  /* Give a kick in the ass of ppp_generic so that he sends us some data */
+  ppp_output_wakeup(&self->chan);
+
+  /* Check size of received packet */
+  if(skb->len > 0)
+    {
+#ifdef PASS_CONNECT_PACKETS
+      DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n");
+      /* Try to pass it to PPP */
+      irnet_data_indication(instance, sap, skb);
+#else /* PASS_CONNECT_PACKETS */
+      DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n");
+      kfree_skb(skb);	/* Note : will be optimised with other kfree... */
+#endif /* PASS_CONNECT_PACKETS */
+    }
+  else
+    kfree_skb(skb);
+
+  /* Notify the control channel */
+  irnet_post_event(self, IRNET_CONNECT_TO,
+		   self->saddr, self->daddr, self->rname, 0);
+
+  DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_flow_indication (instance, sap, flow)
+ *
+ *    Used by TinyTP to tell us if it can accept more data or not
+ *
+ */
+static void
+irnet_flow_indication(void *	instance,
+		      void *	sap,
+		      LOCAL_FLOW flow) 
+{
+  irnet_socket *	self = (irnet_socket *) instance;
+  LOCAL_FLOW		oldflow = self->tx_flow;
+
+  DENTER(IRDA_TCB_TRACE, "(self=0x%p, flow=%d)\n", self, flow);
+
+  /* Update our state */
+  self->tx_flow = flow;
+
+  /* Check what IrTTP want us to do... */
+  switch(flow)
+    {
+    case FLOW_START:
+      DEBUG(IRDA_CB_INFO, "IrTTP wants us to start again\n");
+      /* Check if we really need to wake up PPP */
+      if(oldflow == FLOW_STOP)
+	ppp_output_wakeup(&self->chan);
+      else
+	DEBUG(IRDA_CB_INFO, "But we were already transmitting !!!\n");
+      break;
+    case FLOW_STOP:
+      DEBUG(IRDA_CB_INFO, "IrTTP wants us to slow down\n");
+      break;
+    default:
+      DEBUG(IRDA_CB_INFO, "Unknown flow command!\n");
+      break;
+    }
+
+  DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_status_indication (instance, sap, reason, skb)
+ *
+ *    Link (IrLAP) status report.
+ *
+ */
+static void
+irnet_status_indication(void *	instance,
+			LINK_STATUS link,
+			LOCK_STATUS lock)
+{
+  irnet_socket *	self = (irnet_socket *) instance;
+
+  DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self);
+  DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n");
+
+  /* We can only get this event if we are connected */
+  switch(link)
+    {
+    case STATUS_NO_ACTIVITY:
+      irnet_post_event(self, IRNET_BLOCKED_LINK,
+		       self->saddr, self->daddr, self->rname, 0);
+      break;
+    default:
+      DEBUG(IRDA_CB_INFO, "Unknown status...\n");
+    }
+
+  DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_connect_indication(instance, sap, qos, max_sdu_size, userdata)
+ *
+ *    Incoming connection
+ *
+ * In theory, this function is called only on the server socket.
+ * Some other node is attempting to connect to the IrNET service, and has
+ * sent a connection request on our server socket.
+ * We just redirect the connection to the relevant IrNET socket.
+ * 
+ * Note : we also make sure that between 2 irnet nodes, there can
+ * exist only one irnet connection.
+ */
+static void
+irnet_connect_indication(void *		instance,
+			 void *		sap, 
+			 struct qos_info *qos,
+			 __u32		max_sdu_size,
+			 __u8		max_header_size,
+			 struct sk_buff *skb)
+{
+  irnet_socket *	server = &irnet_server.s;
+  irnet_socket *	new = (irnet_socket *) NULL;
+
+  DENTER(IRDA_TCB_TRACE, "(server=0x%p)\n", server);
+  DASSERT(instance == &irnet_server, , IRDA_CB_ERROR,
+	  "Invalid instance (0x%p) !!!\n", instance);
+  DASSERT(sap == irnet_server.s.tsap, , IRDA_CB_ERROR, "Invalid sap !!!\n");
+
+  /* Try to find the most appropriate IrNET socket */
+  new = irnet_find_socket(server);
+
+  /* After all this hard work, do we have an socket ? */
+  if(new == (irnet_socket *) NULL)
+    {
+      DEXIT(IRDA_CB_INFO, ": No socket waiting for this connection.\n");
+      irnet_disconnect_server(server, skb);
+      return;
+    }
+
+  /* Is the socket already busy ? */
+  if(test_bit(0, &new->ttp_open))
+    {
+      DEXIT(IRDA_CB_INFO, ": Socket already connected.\n");
+      irnet_disconnect_server(server, skb);
+      return;
+    }
+
+  /* The following code is a bit tricky, so need comments ;-)
+   */
+  /* If ttp_connect is set, the socket is trying to connect to the other
+   * end and may have sent a IrTTP connection request and is waiting for
+   * a connection response (that may never come).
+   * Now, the pain is that the socket may have opened a tsap and is
+   * waiting on it, while the other end is trying to connect to it on
+   * another tsap.
+   * Because IrNET can be peer to peer, we need to workaround this.
+   * Furthermore, the way the irnetd script is implemented, the
+   * target will create a second IrNET connection back to the
+   * originator and expect the originator to bind this new connection
+   * to the original PPPD instance.
+   * And of course, if we don't use irnetd, we can have a race when
+   * both side try to connect simultaneously, which could leave both
+   * connections half closed (yuck).
+   * Conclusions :
+   *	1) The "originator" must accept the new connection and get rid
+   *	   of the old one so that irnetd works
+   *	2) One side must deny the new connection to avoid races,
+   *	   but both side must agree on which side it is...
+   * Most often, the originator is primary at the LAP layer.
+   * Jean II
+   */
+  /* Now, let's look at the way I wrote the test...
+   * We need to clear up the ttp_connect flag atomically to prevent
+   * irnet_disconnect_indication() to mess up the tsap we are going to close.
+   * We want to clear the ttp_connect flag only if we close the tsap,
+   * otherwise we will never close it, so we need to check for primary
+   * *before* doing the test on the flag.
+   * And of course, ALLOW_SIMULT_CONNECT can disable this entirely...
+   * Jean II
+   */
+
+  /* Socket already connecting ? On primary ? */
+  if(0
+#ifdef ALLOW_SIMULT_CONNECT
+     || ((irttp_is_primary(server->tsap) == 1)	/* primary */
+	 && (test_and_clear_bit(0, &new->ttp_connect)))
+#endif /* ALLOW_SIMULT_CONNECT */
+     )
+    {
+      DERROR(IRDA_CB_ERROR, "Socket already connecting, but going to reuse it !\n");
+
+      /* Cleanup the old TSAP if necessary - IrIAP will be cleaned up later */
+      if(new->tsap != NULL)
+	{
+	  /* Close the old connection the new socket was attempting,
+	   * so that we can hook it up to the new connection.
+	   * It's now safe to do it... */
+	  irttp_close_tsap(new->tsap);
+	  new->tsap = NULL;
+	}
+    }
+  else
+    {
+      /* Three options :
+       * 1) socket was not connecting or connected : ttp_connect should be 0.
+       * 2) we don't want to connect the socket because we are secondary or
+       * ALLOW_SIMULT_CONNECT is undefined. ttp_connect should be 1.
+       * 3) we are half way in irnet_disconnect_indication(), and it's a
+       * nice race condition... Fortunately, we can detect that by checking
+       * if tsap is still alive. On the other hand, we can't be in
+       * irda_irnet_destroy() otherwise we would not have found this
+       * socket in the hashbin.
+       * Jean II */
+      if((test_bit(0, &new->ttp_connect)) || (new->tsap != NULL))
+	{
+	  /* Don't mess this socket, somebody else in in charge... */
+	  DERROR(IRDA_CB_ERROR, "Race condition detected, socket in use, abort connect...\n");
+	  irnet_disconnect_server(server, skb);
+	  return;
+	}
+    }
+
+  /* So : at this point, we have a socket, and it is idle. Good ! */
+  irnet_connect_socket(server, new, qos, max_sdu_size, max_header_size);
+
+  /* Check size of received packet */
+  if(skb->len > 0)
+    {
+#ifdef PASS_CONNECT_PACKETS
+      DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n");
+      /* Try to pass it to PPP */
+      irnet_data_indication(new, new->tsap, skb);
+#else /* PASS_CONNECT_PACKETS */
+      DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n");
+      kfree_skb(skb);	/* Note : will be optimised with other kfree... */
+#endif /* PASS_CONNECT_PACKETS */
+    }
+  else
+    kfree_skb(skb);
+
+  DEXIT(IRDA_TCB_TRACE, "\n");
+}
+
+
+/********************** IRDA-IAS/LMP CALLBACKS **********************/
+/*
+ * These are the callbacks called by other layers of the IrDA stack,
+ * mainly LMP for discovery and IAS for name queries.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_getvalue_confirm (result, obj_id, value, priv)
+ *
+ *    Got answer from remote LM-IAS, just connect
+ *
+ * This is the reply to a IAS query we were doing to find the TSAP of
+ * the device we want to connect to.
+ * If we have found a valid TSAP, just initiate the TTP connection
+ * on this TSAP.
+ */
+static void
+irnet_getvalue_confirm(int	result,
+		       __u16	obj_id, 
+		       struct ias_value *value,
+		       void *	priv)
+{
+  irnet_socket *	self = (irnet_socket *) priv;
+
+  DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+  DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n");
+
+  /* Check if already connected (via irnet_connect_socket())
+   * or socket is closing down (via irda_irnet_destroy()) */
+  if(! test_bit(0, &self->ttp_connect))
+    {
+      DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n");
+      return;
+    }
+
+  /* We probably don't need to make any more queries */
+  iriap_close(self->iriap);
+  self->iriap = NULL;
+
+  /* Post process the IAS reply */
+  self->dtsap_sel = irnet_ias_to_tsap(self, result, value);
+
+  /* If error, just go out */
+  if(self->errno)
+    {
+      clear_bit(0, &self->ttp_connect);
+      DERROR(IRDA_OCB_ERROR, "IAS connect failed ! (0x%X)\n", self->errno);
+      return;
+    }
+
+  DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n",
+	self->daddr, self->dtsap_sel);
+
+  /* Start up TTP - non blocking */
+  irnet_connect_tsap(self);
+
+  DEXIT(IRDA_OCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discovervalue_confirm (result, obj_id, value, priv)
+ *
+ *    Handle the TSAP discovery procedure state machine.
+ *    Got answer from remote LM-IAS, try next device
+ *
+ * We are doing a  TSAP discovery procedure, and we got an answer to
+ * a IAS query we were doing to find the TSAP on one of the address
+ * in the discovery log.
+ *
+ * If we have found a valid TSAP for the first time, save it. If it's
+ * not the first time we found one, complain.
+ *
+ * If we have more addresses in the log, just initiate a new query.
+ * Note that those query may fail (see irnet_discover_daddr_and_lsap_sel())
+ *
+ * Otherwise, wrap up the procedure (cleanup), check if we have found
+ * any device and connect to it.
+ */
+static void
+irnet_discovervalue_confirm(int		result,
+			    __u16	obj_id, 
+			    struct ias_value *value,
+			    void *	priv)
+{
+  irnet_socket *	self = (irnet_socket *) priv;
+  __u8			dtsap_sel;		/* TSAP we are looking for */
+
+  DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+  DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n");
+
+  /* Check if already connected (via irnet_connect_socket())
+   * or socket is closing down (via irda_irnet_destroy()) */
+  if(! test_bit(0, &self->ttp_connect))
+    {
+      DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n");
+      return;
+    }
+
+  /* Post process the IAS reply */
+  dtsap_sel = irnet_ias_to_tsap(self, result, value);
+
+  /* Have we got something ? */
+  if(self->errno == 0)
+    {
+      /* We found the requested service */
+      if(self->daddr != DEV_ADDR_ANY)
+	{
+	  DERROR(IRDA_OCB_ERROR, "More than one device in range supports IrNET...\n");
+	}
+      else
+	{
+	  /* First time we found that one, save it ! */
+	  self->daddr = self->discoveries[self->disco_index].daddr;
+	  self->dtsap_sel = dtsap_sel;
+	}
+    }
+
+  /* If no failure */
+  if((self->errno == -EADDRNOTAVAIL) || (self->errno == 0))
+    {
+      int	ret;
+
+      /* Search the next node */
+      ret = irnet_discover_next_daddr(self);
+      if(!ret)
+	{
+	  /* In this case, the above request was non-blocking.
+	   * We will return here after a while... */
+	  return;
+	}
+      /* In this case, we have processed the last discovery item */
+    }
+
+  /* No more queries to be done (failure or last one) */
+
+  /* We probably don't need to make any more queries */
+  iriap_close(self->iriap);
+  self->iriap = NULL;
+
+  /* No more items : remove the log and signal termination */
+  DEBUG(IRDA_OCB_INFO, "Cleaning up log (0x%p)\n",
+	self->discoveries);
+  if(self->discoveries != NULL)
+    {
+      /* Cleanup our copy of the discovery log */
+      kfree(self->discoveries);
+      self->discoveries = NULL;
+    }
+  self->disco_number = -1;
+
+  /* Check out what we found */
+  if(self->daddr == DEV_ADDR_ANY)
+    {
+      self->daddr = DEV_ADDR_ANY;
+      clear_bit(0, &self->ttp_connect);
+      DEXIT(IRDA_OCB_TRACE, ": cannot discover IrNET in any device !!!\n");
+      return;
+    }
+
+  /* We have a valid address - just connect */
+
+  DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n",
+	self->daddr, self->dtsap_sel);
+
+  /* Start up TTP - non blocking */
+  irnet_connect_tsap(self);
+
+  DEXIT(IRDA_OCB_TRACE, "\n");
+}
+
+#ifdef DISCOVERY_EVENTS
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_discovery_indication (discovery)
+ *
+ *    Got a discovery indication from IrLMP, post an event
+ *
+ * Note : IrLMP take care of matching the hint mask for us, and also
+ * check if it is a "new" node for us...
+ *
+ * As IrLMP filter on the IrLAN hint bit, we get both IrLAN and IrNET
+ * nodes, so it's only at connection time that we will know if the
+ * node support IrNET, IrLAN or both. The other solution is to check
+ * in IAS the PNP ids and service name.
+ * Note : even if a node support IrNET (or IrLAN), it's no guarantee
+ * that we will be able to connect to it, the node might already be
+ * busy...
+ *
+ * One last thing : in some case, this function will trigger duplicate
+ * discovery events. On the other hand, we should catch all
+ * discoveries properly (i.e. not miss one). Filtering duplicate here
+ * is to messy, so we leave that to user space...
+ */
+static void
+irnet_discovery_indication(discinfo_t *		discovery,
+			   DISCOVERY_MODE	mode,
+			   void *		priv)
+{
+  irnet_socket *	self = &irnet_server.s;
+	
+  DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+  DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR,
+	  "Invalid instance (0x%p) !!!\n", priv);
+
+  DEBUG(IRDA_OCB_INFO, "Discovered new IrNET/IrLAN node %s...\n",
+	discovery->info);
+
+  /* Notify the control channel */
+  irnet_post_event(NULL, IRNET_DISCOVER,
+		   discovery->saddr, discovery->daddr, discovery->info,
+		   u16ho(discovery->hints));
+
+  DEXIT(IRDA_OCB_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_expiry_indication (expiry)
+ *
+ *    Got a expiry indication from IrLMP, post an event
+ *
+ * Note : IrLMP take care of matching the hint mask for us, we only
+ * check if it is a "new" node...
+ */
+static void
+irnet_expiry_indication(discinfo_t *	expiry,
+			DISCOVERY_MODE	mode,
+			void *		priv)
+{
+  irnet_socket *	self = &irnet_server.s;
+	
+  DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self);
+  DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR,
+	  "Invalid instance (0x%p) !!!\n", priv);
+
+  DEBUG(IRDA_OCB_INFO, "IrNET/IrLAN node %s expired...\n",
+	expiry->info);
+
+  /* Notify the control channel */
+  irnet_post_event(NULL, IRNET_EXPIRE,
+		   expiry->saddr, expiry->daddr, expiry->info,
+		   u16ho(expiry->hints));
+
+  DEXIT(IRDA_OCB_TRACE, "\n");
+}
+#endif /* DISCOVERY_EVENTS */
+
+
+/*********************** PROC ENTRY CALLBACKS ***********************/
+/*
+ * We create a instance in the /proc filesystem, and here we take care
+ * of that...
+ */
+
+#ifdef CONFIG_PROC_FS
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_proc_read (buf, start, offset, len, unused)
+ *
+ *    Give some info to the /proc file system
+ */
+static int
+irnet_proc_read(char *	buf,
+		char **	start,
+		off_t	offset,
+		int	len)
+{
+  irnet_socket *	self;
+  char *		state;
+  int			i = 0;
+
+  len = 0;
+	
+  /* Get the IrNET server information... */
+  len += sprintf(buf+len, "IrNET server - ");
+  len += sprintf(buf+len, "IrDA state: %s, ",
+		 (irnet_server.running ? "running" : "dead"));
+  len += sprintf(buf+len, "stsap_sel: %02x, ", irnet_server.s.stsap_sel);
+  len += sprintf(buf+len, "dtsap_sel: %02x\n", irnet_server.s.dtsap_sel);
+
+  /* Do we need to continue ? */
+  if(!irnet_server.running)
+    return len;
+
+  /* Protect access to the instance list */
+  spin_lock_bh(&irnet_server.spinlock);
+
+  /* Get the sockets one by one... */
+  self = (irnet_socket *) hashbin_get_first(irnet_server.list);
+  while(self != NULL)
+    {
+      /* Start printing info about the socket. */
+      len += sprintf(buf+len, "\nIrNET socket %d - ", i++);
+
+      /* First, get the requested configuration */
+      len += sprintf(buf+len, "Requested IrDA name: \"%s\", ", self->rname);
+      len += sprintf(buf+len, "daddr: %08x, ", self->rdaddr);
+      len += sprintf(buf+len, "saddr: %08x\n", self->rsaddr);
+
+      /* Second, get all the PPP info */
+      len += sprintf(buf+len, "	PPP state: %s",
+		 (self->ppp_open ? "registered" : "unregistered"));
+      if(self->ppp_open)
+	{
+	  len += sprintf(buf+len, ", unit: ppp%d",
+			 ppp_unit_number(&self->chan));
+	  len += sprintf(buf+len, ", channel: %d",
+			 ppp_channel_index(&self->chan));
+	  len += sprintf(buf+len, ", mru: %d",
+			 self->mru);
+	  /* Maybe add self->flags ? Later... */
+	}
+
+      /* Then, get all the IrDA specific info... */
+      if(self->ttp_open)
+	state = "connected";
+      else
+	if(self->tsap != NULL)
+	  state = "connecting";
+	else
+	  if(self->iriap != NULL)
+	    state = "searching";
+	  else
+	    if(self->ttp_connect)
+	      state = "weird";
+	    else
+	      state = "idle";
+      len += sprintf(buf+len, "\n	IrDA state: %s, ", state);
+      len += sprintf(buf+len, "daddr: %08x, ", self->daddr);
+      len += sprintf(buf+len, "stsap_sel: %02x, ", self->stsap_sel);
+      len += sprintf(buf+len, "dtsap_sel: %02x\n", self->dtsap_sel);
+
+      /* Next socket, please... */
+      self = (irnet_socket *) hashbin_get_next(irnet_server.list);
+    }
+
+  /* Spin lock end */
+  spin_unlock_bh(&irnet_server.spinlock);
+
+  return len;
+}
+#endif /* PROC_FS */
+
+
+/********************** CONFIGURATION/CLEANUP **********************/
+/*
+ * Initialisation and teardown of the IrDA part, called at module
+ * insertion and removal...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Prepare the IrNET layer for operation...
+ */
+int __init
+irda_irnet_init(void)
+{
+  int		err = 0;
+
+  DENTER(MODULE_TRACE, "()\n");
+
+  /* Pure paranoia - should be redundant */
+  memset(&irnet_server, 0, sizeof(struct irnet_root));
+
+  /* Setup start of irnet instance list */
+  irnet_server.list = hashbin_new(HB_NOLOCK); 
+  DABORT(irnet_server.list == NULL, -ENOMEM,
+	 MODULE_ERROR, "Can't allocate hashbin!\n");
+  /* Init spinlock for instance list */
+  spin_lock_init(&irnet_server.spinlock);
+
+  /* Initialise control channel */
+  init_waitqueue_head(&irnet_events.rwait);
+  irnet_events.index = 0;
+  /* Init spinlock for event logging */
+  spin_lock_init(&irnet_events.spinlock);
+
+#ifdef CONFIG_PROC_FS
+  /* Add a /proc file for irnet infos */
+  create_proc_info_entry("irnet", 0, proc_irda, irnet_proc_read);
+#endif /* CONFIG_PROC_FS */
+
+  /* Setup the IrNET server */
+  err = irnet_setup_server();
+
+  if(!err)
+    /* We are no longer functional... */
+    irnet_server.running = 1;
+
+  DEXIT(MODULE_TRACE, "\n");
+  return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Cleanup at exit...
+ */
+void __exit
+irda_irnet_cleanup(void)
+{
+  DENTER(MODULE_TRACE, "()\n");
+
+  /* We are no longer there... */
+  irnet_server.running = 0;
+
+#ifdef CONFIG_PROC_FS
+  /* Remove our /proc file */
+  remove_proc_entry("irnet", proc_irda);
+#endif /* CONFIG_PROC_FS */
+
+  /* Remove our IrNET server from existence */
+  irnet_destroy_server();
+
+  /* Remove all instances of IrNET socket still present */
+  hashbin_delete(irnet_server.list, (FREE_FUNC) irda_irnet_destroy);
+
+  DEXIT(MODULE_TRACE, "\n");
+}
diff --git a/net/irda/irnet/irnet_irda.h b/net/irda/irnet/irnet_irda.h
new file mode 100644
index 00000000000..f2fecd32d8f
--- /dev/null
+++ b/net/irda/irnet/irnet_irda.h
@@ -0,0 +1,186 @@
+/*
+ *	IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ *		Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains all definitions and declarations necessary for the
+ * IRDA part of the IrNET module (dealing with IrTTP, IrIAS and co).
+ * This file is a private header, so other modules don't want to know
+ * what's in there...
+ */
+
+#ifndef IRNET_IRDA_H
+#define IRNET_IRDA_H
+
+/***************************** INCLUDES *****************************/
+/* Please add other headers in irnet.h */
+
+#include "irnet.h"		/* Module global include */
+
+/************************ CONSTANTS & MACROS ************************/
+
+/*
+ * Name of the service (socket name) used by IrNET
+ */
+/* IAS object name (or part of it) */
+#define IRNET_SERVICE_NAME	"IrNetv1"
+/* IAS attribute */
+#define IRNET_IAS_VALUE		"IrDA:TinyTP:LsapSel"
+/* LMP notify name for client (only for /proc/net/irda/irlmp) */
+#define IRNET_NOTIFY_NAME	"IrNET socket"
+/* LMP notify name for server (only for /proc/net/irda/irlmp) */
+#define IRNET_NOTIFY_NAME_SERV	"IrNET server"
+
+/****************************** TYPES ******************************/
+
+/*
+ * This is the main structure where we store all the data pertaining to
+ * the IrNET server (listen for connection requests) and the root
+ * of the IrNET socket list
+ */
+typedef struct irnet_root
+{
+  irnet_socket		s;		/* To pretend we are a client... */
+
+  /* Generic stuff */
+  int			magic;		/* Paranoia */
+  int			running;	/* Are we operational ? */
+
+  /* Link list of all IrNET instances opened */
+  hashbin_t *		list;
+  spinlock_t		spinlock;	/* Serialize access to the list */
+  /* Note : the way hashbin has been designed is absolutely not
+   * reentrant, beware... So, we blindly protect all with spinlock */
+
+  /* Handle for the hint bit advertised in IrLMP */
+  void *		skey;
+
+  /* Server socket part */
+  struct ias_object *	ias_obj;	/* Our service name + lsap in IAS */
+
+} irnet_root;
+
+
+/**************************** PROTOTYPES ****************************/
+
+/* ----------------------- CONTROL CHANNEL ----------------------- */
+static void
+	irnet_post_event(irnet_socket *,
+			 irnet_event,
+			 __u32,
+			 __u32,
+			 char *,
+			 __u16);
+/* ----------------------- IRDA SUBROUTINES ----------------------- */
+static inline int
+	irnet_open_tsap(irnet_socket *);
+static inline __u8
+	irnet_ias_to_tsap(irnet_socket *,
+			  int,
+			  struct ias_value *);
+static inline int
+	irnet_find_lsap_sel(irnet_socket *);
+static inline int
+	irnet_connect_tsap(irnet_socket *);
+static inline int
+	irnet_discover_next_daddr(irnet_socket *);
+static inline int
+	irnet_discover_daddr_and_lsap_sel(irnet_socket *);
+static inline int
+	irnet_dname_to_daddr(irnet_socket *);
+/* ------------------------ SERVER SOCKET ------------------------ */
+static inline int
+	irnet_daddr_to_dname(irnet_socket *);
+static inline irnet_socket *
+	irnet_find_socket(irnet_socket *);
+static inline int
+	irnet_connect_socket(irnet_socket *,
+			     irnet_socket *,
+			     struct qos_info *,
+			     __u32,
+			     __u8);
+static inline void
+	irnet_disconnect_server(irnet_socket *,
+				struct sk_buff *);
+static inline int
+	irnet_setup_server(void);
+static inline void
+	irnet_destroy_server(void);
+/* ---------------------- IRDA-TTP CALLBACKS ---------------------- */
+static int
+	irnet_data_indication(void *,		/* instance */
+			      void *,		/* sap */
+			      struct sk_buff *);
+static void
+	irnet_disconnect_indication(void *,
+				    void *,
+				    LM_REASON,
+				    struct sk_buff *);
+static void
+	irnet_connect_confirm(void *,
+			      void *,
+			      struct qos_info *,
+			      __u32,
+			      __u8,
+			      struct sk_buff *);
+static void
+	irnet_flow_indication(void *,
+			      void *,
+			      LOCAL_FLOW);
+static void
+	irnet_status_indication(void *,
+				LINK_STATUS,
+				LOCK_STATUS);
+static void
+	irnet_connect_indication(void *,
+				 void *,
+				 struct qos_info *,
+				 __u32,
+				 __u8,
+				 struct sk_buff *);
+/* -------------------- IRDA-IAS/LMP CALLBACKS -------------------- */
+static void
+	irnet_getvalue_confirm(int,
+			       __u16,
+			       struct ias_value *,
+			       void *);
+static void
+	irnet_discovervalue_confirm(int,
+				    __u16, 
+				    struct ias_value *,
+				    void *);
+#ifdef DISCOVERY_EVENTS
+static void
+	irnet_discovery_indication(discinfo_t *,
+				   DISCOVERY_MODE,
+				   void *);
+static void
+	irnet_expiry_indication(discinfo_t *,
+				DISCOVERY_MODE,
+				void *);
+#endif
+/* -------------------------- PROC ENTRY -------------------------- */
+#ifdef CONFIG_PROC_FS
+static int
+	irnet_proc_read(char *,
+			char **,
+			off_t,
+			int);
+#endif /* CONFIG_PROC_FS */
+
+/**************************** VARIABLES ****************************/
+
+/*
+ * The IrNET server. Listen to connection requests and co...
+ */
+static struct irnet_root	irnet_server;
+
+/* Control channel stuff (note : extern) */
+struct irnet_ctrl_channel	irnet_events;
+
+/* The /proc/net/irda directory, defined elsewhere... */
+#ifdef CONFIG_PROC_FS
+extern struct proc_dir_entry *proc_irda;
+#endif /* CONFIG_PROC_FS */
+
+#endif /* IRNET_IRDA_H */
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
new file mode 100644
index 00000000000..f8f984bb992
--- /dev/null
+++ b/net/irda/irnet/irnet_ppp.c
@@ -0,0 +1,1142 @@
+/*
+ *	IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ *		Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file implement the PPP interface and /dev/irnet character device.
+ * The PPP interface hook to the ppp_generic module, handle all our
+ *	relationship to the PPP code in the kernel (and by extension to pppd),
+ *	and exchange PPP frames with this module (send/receive).
+ * The /dev/irnet device is used primarily for 2 functions :
+ *	1) as a stub for pppd (the ppp daemon), so that we can appropriately
+ *	generate PPP sessions (we pretend we are a tty).
+ *	2) as a control channel (write commands, read events)
+ */
+
+#include "irnet_ppp.h"		/* Private header */
+/* Please put other headers in irnet.h - Thanks */
+
+/* Generic PPP callbacks (to call us) */
+static struct ppp_channel_ops irnet_ppp_ops = {
+	.start_xmit = ppp_irnet_send,
+	.ioctl = ppp_irnet_ioctl
+};
+
+/************************* CONTROL CHANNEL *************************/
+/*
+ * When a pppd instance is not active on /dev/irnet, it acts as a control
+ * channel.
+ * Writing allow to set up the IrDA destination of the IrNET channel,
+ * and any application may be read events happening in IrNET...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write is used to send a command to configure a IrNET channel
+ * before it is open by pppd. The syntax is : "command argument"
+ * Currently there is only two defined commands :
+ *	o name : set the requested IrDA nickname of the IrNET peer.
+ *	o addr : set the requested IrDA address of the IrNET peer.
+ * Note : the code is crude, but effective...
+ */
+static inline ssize_t
+irnet_ctrl_write(irnet_socket *	ap,
+		 const char __user *buf,
+		 size_t		count)
+{
+  char		command[IRNET_MAX_COMMAND];
+  char *	start;		/* Current command being processed */
+  char *	next;		/* Next command to process */
+  int		length;		/* Length of current command */
+
+  DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count);
+
+  /* Check for overflow... */
+  DABORT(count >= IRNET_MAX_COMMAND, -ENOMEM,
+	 CTRL_ERROR, "Too much data !!!\n");
+
+  /* Get the data in the driver */
+  if(copy_from_user(command, buf, count))
+    {
+      DERROR(CTRL_ERROR, "Invalid user space pointer.\n");
+      return -EFAULT;
+    }
+
+  /* Safe terminate the string */
+  command[count] = '\0';
+  DEBUG(CTRL_INFO, "Command line received is ``%s'' (%Zd).\n",
+	command, count);
+
+  /* Check every commands in the command line */
+  next = command;
+  while(next != NULL)
+    {
+      /* Look at the next command */
+      start = next;
+
+      /* Scrap whitespaces before the command */
+      while(isspace(*start))
+	start++;
+
+      /* ',' is our command separator */
+      next = strchr(start, ',');
+      if(next)
+	{
+	  *next = '\0';			/* Terminate command */
+	  length = next - start;	/* Length */
+	  next++;			/* Skip the '\0' */
+	}
+      else
+	length = strlen(start);
+
+      DEBUG(CTRL_INFO, "Found command ``%s'' (%d).\n", start, length);
+
+      /* Check if we recognised one of the known command
+       * We can't use "switch" with strings, so hack with "continue" */
+      
+      /* First command : name -> Requested IrDA nickname */
+      if(!strncmp(start, "name", 4))
+	{
+	  /* Copy the name only if is included and not "any" */
+	  if((length > 5) && (strcmp(start + 5, "any")))
+	    {
+	      /* Strip out trailing whitespaces */
+	      while(isspace(start[length - 1]))
+		length--;
+
+	      /* Copy the name for later reuse */
+	      memcpy(ap->rname, start + 5, length - 5);
+	      ap->rname[length - 5] = '\0';
+	    }
+	  else
+	    ap->rname[0] = '\0';
+	  DEBUG(CTRL_INFO, "Got rname = ``%s''\n", ap->rname);
+
+	  /* Restart the loop */
+	  continue;
+	}
+
+      /* Second command : addr, daddr -> Requested IrDA destination address
+       * Also process : saddr -> Requested IrDA source address */
+      if((!strncmp(start, "addr", 4)) ||
+	 (!strncmp(start, "daddr", 5)) ||
+	 (!strncmp(start, "saddr", 5)))
+	{
+	  __u32		addr = DEV_ADDR_ANY;
+
+	  /* Copy the address only if is included and not "any" */
+	  if((length > 5) && (strcmp(start + 5, "any")))
+	    {
+	      char *	begp = start + 5;
+	      char *	endp;
+
+	      /* Scrap whitespaces before the command */
+	      while(isspace(*begp))
+		begp++;
+
+	      /* Convert argument to a number (last arg is the base) */
+	      addr = simple_strtoul(begp, &endp, 16);
+	      /* Has it worked  ? (endp should be start + length) */
+	      DABORT(endp <= (start + 5), -EINVAL,
+		     CTRL_ERROR, "Invalid address.\n");
+	    }
+	  /* Which type of address ? */
+	  if(start[0] == 's')
+	    {
+	      /* Save it */
+	      ap->rsaddr = addr;
+	      DEBUG(CTRL_INFO, "Got rsaddr = %08x\n", ap->rsaddr);
+	    }
+	  else
+	    {
+	      /* Save it */
+	      ap->rdaddr = addr;
+	      DEBUG(CTRL_INFO, "Got rdaddr = %08x\n", ap->rdaddr);
+	    }
+
+	  /* Restart the loop */
+	  continue;
+	}
+
+      /* Other possible command : connect N (number of retries) */
+
+      /* No command matched -> Failed... */
+      DABORT(1, -EINVAL, CTRL_ERROR, "Not a recognised IrNET command.\n");
+    }
+
+  /* Success : we have parsed all commands successfully */
+  return(count);
+}
+
+#ifdef INITIAL_DISCOVERY
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_get_discovery_log (self)
+ *
+ *    Query the content on the discovery log if not done
+ *
+ * This function query the current content of the discovery log
+ * at the startup of the event channel and save it in the internal struct.
+ */
+static void
+irnet_get_discovery_log(irnet_socket *	ap)
+{
+  __u16		mask = irlmp_service_to_hint(S_LAN);
+
+  /* Ask IrLMP for the current discovery log */
+  ap->discoveries = irlmp_get_discoveries(&ap->disco_number, mask,
+					  DISCOVERY_DEFAULT_SLOTS);
+
+  /* Check if the we got some results */
+  if(ap->discoveries == NULL)
+    ap->disco_number = -1;
+
+  DEBUG(CTRL_INFO, "Got the log (0x%p), size is %d\n",
+	ap->discoveries, ap->disco_number);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irnet_read_discovery_log (self, event)
+ *
+ *    Read the content on the discovery log
+ *
+ * This function dump the current content of the discovery log
+ * at the startup of the event channel.
+ * Return 1 if wrote an event on the control channel...
+ *
+ * State of the ap->disco_XXX variables :
+ * Socket creation :  discoveries = NULL ; disco_index = 0 ; disco_number = 0
+ * While reading :    discoveries = ptr  ; disco_index = X ; disco_number = Y
+ * After reading :    discoveries = NULL ; disco_index = Y ; disco_number = -1
+ */
+static inline int
+irnet_read_discovery_log(irnet_socket *	ap,
+			 char *		event)
+{
+  int		done_event = 0;
+
+  DENTER(CTRL_TRACE, "(ap=0x%p, event=0x%p)\n",
+	 ap, event);
+
+  /* Test if we have some work to do or we have already finished */
+  if(ap->disco_number == -1)
+    {
+      DEBUG(CTRL_INFO, "Already done\n");
+      return 0;
+    }
+
+  /* Test if it's the first time and therefore we need to get the log */
+  if(ap->discoveries == NULL)
+    irnet_get_discovery_log(ap);
+
+  /* Check if we have more item to dump */
+  if(ap->disco_index < ap->disco_number)
+    {
+      /* Write an event */
+      sprintf(event, "Found %08x (%s) behind %08x {hints %02X-%02X}\n",
+	      ap->discoveries[ap->disco_index].daddr,
+	      ap->discoveries[ap->disco_index].info,
+	      ap->discoveries[ap->disco_index].saddr,
+	      ap->discoveries[ap->disco_index].hints[0],
+	      ap->discoveries[ap->disco_index].hints[1]);
+      DEBUG(CTRL_INFO, "Writing discovery %d : %s\n",
+	    ap->disco_index, ap->discoveries[ap->disco_index].info);
+
+      /* We have an event */
+      done_event = 1;
+      /* Next discovery */
+      ap->disco_index++;
+    }
+
+  /* Check if we have done the last item */
+  if(ap->disco_index >= ap->disco_number)
+    {
+      /* No more items : remove the log and signal termination */
+      DEBUG(CTRL_INFO, "Cleaning up log (0x%p)\n",
+	    ap->discoveries);
+      if(ap->discoveries != NULL)
+	{
+	  /* Cleanup our copy of the discovery log */
+	  kfree(ap->discoveries);
+	  ap->discoveries = NULL;
+	}
+      ap->disco_number = -1;
+    }
+
+  return done_event;
+}
+#endif /* INITIAL_DISCOVERY */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read is used to get IrNET events
+ */
+static inline ssize_t
+irnet_ctrl_read(irnet_socket *	ap,
+		struct file *	file,
+		char __user *	buf,
+		size_t		count)
+{
+  DECLARE_WAITQUEUE(wait, current);
+  char		event[64];	/* Max event is 61 char */
+  ssize_t	ret = 0;
+
+  DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count);
+
+  /* Check if we can write an event out in one go */
+  DABORT(count < sizeof(event), -EOVERFLOW, CTRL_ERROR, "Buffer to small.\n");
+
+#ifdef INITIAL_DISCOVERY
+  /* Check if we have read the log */
+  if(irnet_read_discovery_log(ap, event))
+    {
+      /* We have an event !!! Copy it to the user */
+      if(copy_to_user(buf, event, strlen(event)))
+	{
+	  DERROR(CTRL_ERROR, "Invalid user space pointer.\n");
+	  return -EFAULT;
+	}
+
+      DEXIT(CTRL_TRACE, "\n");
+      return(strlen(event));
+    }
+#endif /* INITIAL_DISCOVERY */
+
+  /* Put ourselves on the wait queue to be woken up */
+  add_wait_queue(&irnet_events.rwait, &wait);
+  current->state = TASK_INTERRUPTIBLE;
+  for(;;)
+    {
+      /* If there is unread events */
+      ret = 0;
+      if(ap->event_index != irnet_events.index)
+	break;
+      ret = -EAGAIN;
+      if(file->f_flags & O_NONBLOCK)
+	break;
+      ret = -ERESTARTSYS;
+      if(signal_pending(current))
+	break;
+      /* Yield and wait to be woken up */
+      schedule();
+    }
+  current->state = TASK_RUNNING;
+  remove_wait_queue(&irnet_events.rwait, &wait);
+
+  /* Did we got it ? */
+  if(ret != 0)
+    {
+      /* No, return the error code */
+      DEXIT(CTRL_TRACE, " - ret %Zd\n", ret);
+      return ret;
+    }
+
+  /* Which event is it ? */
+  switch(irnet_events.log[ap->event_index].event)
+    {
+    case IRNET_DISCOVER:
+      sprintf(event, "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].saddr,
+	      irnet_events.log[ap->event_index].hints.byte[0],
+	      irnet_events.log[ap->event_index].hints.byte[1]);
+      break;
+    case IRNET_EXPIRE:
+      sprintf(event, "Expired %08x (%s) behind %08x {hints %02X-%02X}\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].saddr,
+	      irnet_events.log[ap->event_index].hints.byte[0],
+	      irnet_events.log[ap->event_index].hints.byte[1]);
+      break;
+    case IRNET_CONNECT_TO:
+      sprintf(event, "Connected to %08x (%s) on ppp%d\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].unit);
+      break;
+    case IRNET_CONNECT_FROM:
+      sprintf(event, "Connection from %08x (%s) on ppp%d\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].unit);
+      break;
+    case IRNET_REQUEST_FROM:
+      sprintf(event, "Request from %08x (%s) behind %08x\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].saddr);
+      break;
+    case IRNET_NOANSWER_FROM:
+      sprintf(event, "No-answer from %08x (%s) on ppp%d\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].unit);
+      break;
+    case IRNET_BLOCKED_LINK:
+      sprintf(event, "Blocked link with %08x (%s) on ppp%d\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].unit);
+      break;
+    case IRNET_DISCONNECT_FROM:
+      sprintf(event, "Disconnection from %08x (%s) on ppp%d\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name,
+	      irnet_events.log[ap->event_index].unit);
+      break;
+    case IRNET_DISCONNECT_TO:
+      sprintf(event, "Disconnected to %08x (%s)\n",
+	      irnet_events.log[ap->event_index].daddr,
+	      irnet_events.log[ap->event_index].name);
+      break;
+    default:
+      sprintf(event, "Bug\n");
+    }
+  /* Increment our event index */
+  ap->event_index = (ap->event_index + 1) % IRNET_MAX_EVENTS;
+
+  DEBUG(CTRL_INFO, "Event is :%s", event);
+
+  /* Copy it to the user */
+  if(copy_to_user(buf, event, strlen(event)))
+    {
+      DERROR(CTRL_ERROR, "Invalid user space pointer.\n");
+      return -EFAULT;
+    }
+
+  DEXIT(CTRL_TRACE, "\n");
+  return(strlen(event));
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Poll : called when someone do a select on /dev/irnet.
+ * Just check if there are new events...
+ */
+static inline unsigned int
+irnet_ctrl_poll(irnet_socket *	ap,
+		struct file *	file,
+		poll_table *	wait)
+{
+  unsigned int mask;
+
+  DENTER(CTRL_TRACE, "(ap=0x%p)\n", ap);
+
+  poll_wait(file, &irnet_events.rwait, wait);
+  mask = POLLOUT | POLLWRNORM;
+  /* If there is unread events */
+  if(ap->event_index != irnet_events.index)
+    mask |= POLLIN | POLLRDNORM;
+#ifdef INITIAL_DISCOVERY
+  if(ap->disco_number != -1)
+    {
+      /* Test if it's the first time and therefore we need to get the log */
+      if(ap->discoveries == NULL)
+	irnet_get_discovery_log(ap);
+      /* Recheck */
+      if(ap->disco_number != -1)
+	mask |= POLLIN | POLLRDNORM;
+    }
+#endif /* INITIAL_DISCOVERY */
+
+  DEXIT(CTRL_TRACE, " - mask=0x%X\n", mask);
+  return mask;
+}
+
+
+/*********************** FILESYSTEM CALLBACKS ***********************/
+/*
+ * Implement the usual open, read, write functions that will be called
+ * by the file system when some action is performed on /dev/irnet.
+ * Most of those actions will in fact be performed by "pppd" or
+ * the control channel, we just act as a redirector...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Open : when somebody open /dev/irnet
+ * We basically create a new instance of irnet and initialise it.
+ */
+static int
+dev_irnet_open(struct inode *	inode,
+	       struct file *	file)
+{
+  struct irnet_socket *	ap;
+  int			err;
+
+  DENTER(FS_TRACE, "(file=0x%p)\n", file);
+
+#ifdef SECURE_DEVIRNET
+  /* This could (should?) be enforced by the permissions on /dev/irnet. */
+  if(!capable(CAP_NET_ADMIN))
+    return -EPERM;
+#endif /* SECURE_DEVIRNET */
+
+  /* Allocate a private structure for this IrNET instance */
+  ap = kmalloc(sizeof(*ap), GFP_KERNEL);
+  DABORT(ap == NULL, -ENOMEM, FS_ERROR, "Can't allocate struct irnet...\n");
+
+  /* initialize the irnet structure */
+  memset(ap, 0, sizeof(*ap));
+  ap->file = file;
+
+  /* PPP channel setup */
+  ap->ppp_open = 0;
+  ap->chan.private = ap;
+  ap->chan.ops = &irnet_ppp_ops;
+  ap->chan.mtu = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN);
+  ap->chan.hdrlen = 2 + TTP_MAX_HEADER;		/* for A/C + Max IrDA hdr */
+  /* PPP parameters */
+  ap->mru = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN);
+  ap->xaccm[0] = ~0U;
+  ap->xaccm[3] = 0x60000000U;
+  ap->raccm = ~0U;
+
+  /* Setup the IrDA part... */
+  err = irda_irnet_create(ap);
+  if(err)
+    {
+      DERROR(FS_ERROR, "Can't setup IrDA link...\n");
+      kfree(ap);
+      return err;
+    }
+
+  /* For the control channel */
+  ap->event_index = irnet_events.index;	/* Cancel all past events */
+
+  /* Put our stuff where we will be able to find it later */
+  file->private_data = ap;
+
+  DEXIT(FS_TRACE, " - ap=0x%p\n", ap);
+  return 0;
+}
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Close : when somebody close /dev/irnet
+ * Destroy the instance of /dev/irnet
+ */
+static int
+dev_irnet_close(struct inode *	inode,
+		struct file *	file)
+{
+  irnet_socket *	ap = (struct irnet_socket *) file->private_data;
+
+  DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n",
+	 file, ap);
+  DABORT(ap == NULL, 0, FS_ERROR, "ap is NULL !!!\n");
+
+  /* Detach ourselves */
+  file->private_data = NULL;
+
+  /* Close IrDA stuff */
+  irda_irnet_destroy(ap);
+
+  /* Disconnect from the generic PPP layer if not already done */
+  if(ap->ppp_open)
+    {
+      DERROR(FS_ERROR, "Channel still registered - deregistering !\n");
+      ap->ppp_open = 0;
+      ppp_unregister_channel(&ap->chan);
+    }
+
+  kfree(ap);
+
+  DEXIT(FS_TRACE, "\n");
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Write does nothing.
+ * (we receive packet from ppp_generic through ppp_irnet_send())
+ */
+static ssize_t
+dev_irnet_write(struct file *	file,
+		const char __user *buf,
+		size_t		count,
+		loff_t *	ppos)
+{
+  irnet_socket *	ap = (struct irnet_socket *) file->private_data;
+
+  DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%Zd)\n",
+	file, ap, count);
+  DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n");
+
+  /* If we are connected to ppp_generic, let it handle the job */
+  if(ap->ppp_open)
+    return -EAGAIN;
+  else
+    return irnet_ctrl_write(ap, buf, count);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read doesn't do much either.
+ * (pppd poll us, but ultimately reads through /dev/ppp)
+ */
+static ssize_t
+dev_irnet_read(struct file *	file,
+	       char __user *	buf,
+	       size_t		count,
+	       loff_t *		ppos)
+{
+  irnet_socket *	ap = (struct irnet_socket *) file->private_data;
+
+  DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%Zd)\n",
+	file, ap, count);
+  DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n");
+
+  /* If we are connected to ppp_generic, let it handle the job */
+  if(ap->ppp_open)
+    return -EAGAIN;
+  else
+    return irnet_ctrl_read(ap, file, buf, count);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Poll : called when someone do a select on /dev/irnet
+ */
+static unsigned int
+dev_irnet_poll(struct file *	file,
+	       poll_table *	wait)
+{
+  irnet_socket *	ap = (struct irnet_socket *) file->private_data;
+  unsigned int		mask;
+
+  DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n",
+	 file, ap);
+
+  mask = POLLOUT | POLLWRNORM;
+  DABORT(ap == NULL, mask, FS_ERROR, "ap is NULL !!!\n");
+
+  /* If we are connected to ppp_generic, let it handle the job */
+  if(!ap->ppp_open)
+    mask |= irnet_ctrl_poll(ap, file, wait);
+
+  DEXIT(FS_TRACE, " - mask=0x%X\n", mask);
+  return(mask);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * IOCtl : Called when someone does some ioctls on /dev/irnet
+ * This is the way pppd configure us and control us while the PPP
+ * instance is active.
+ */
+static int
+dev_irnet_ioctl(struct inode *	inode,
+		struct file *	file,
+		unsigned int	cmd,
+		unsigned long	arg)
+{
+  irnet_socket *	ap = (struct irnet_socket *) file->private_data;
+  int			err;
+  int			val;
+  void __user *argp = (void __user *)arg;
+
+  DENTER(FS_TRACE, "(file=0x%p, ap=0x%p, cmd=0x%X)\n",
+	 file, ap, cmd);
+
+  /* Basic checks... */
+  DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n");
+#ifdef SECURE_DEVIRNET
+  if(!capable(CAP_NET_ADMIN))
+    return -EPERM;
+#endif /* SECURE_DEVIRNET */
+
+  err = -EFAULT;
+  switch(cmd)
+    {
+      /* Set discipline (should be N_SYNC_PPP or N_TTY) */
+    case TIOCSETD:
+      if(get_user(val, (int __user *)argp))
+	break;
+      if((val == N_SYNC_PPP) || (val == N_PPP))
+	{
+	  DEBUG(FS_INFO, "Entering PPP discipline.\n");
+	  /* PPP channel setup (ap->chan in configued in dev_irnet_open())*/
+	  err = ppp_register_channel(&ap->chan);
+	  if(err == 0)
+	    {
+	      /* Our ppp side is active */
+	      ap->ppp_open = 1;
+
+	      DEBUG(FS_INFO, "Trying to establish a connection.\n");
+	      /* Setup the IrDA link now - may fail... */
+	      irda_irnet_connect(ap);
+	    }
+	  else
+	    DERROR(FS_ERROR, "Can't setup PPP channel...\n");
+	}
+      else
+	{
+	  /* In theory, should be N_TTY */
+	  DEBUG(FS_INFO, "Exiting PPP discipline.\n");
+	  /* Disconnect from the generic PPP layer */
+	  if(ap->ppp_open)
+	    {
+	      ap->ppp_open = 0;
+	      ppp_unregister_channel(&ap->chan);
+	    }
+	  else
+	    DERROR(FS_ERROR, "Channel not registered !\n");
+	  err = 0;
+	}
+      break;
+
+      /* Query PPP channel and unit number */
+    case PPPIOCGCHAN:
+      if(!ap->ppp_open)
+	break;
+      if(put_user(ppp_channel_index(&ap->chan), (int __user *)argp))
+	break;
+      DEBUG(FS_INFO, "Query channel.\n");
+      err = 0;
+      break;
+    case PPPIOCGUNIT:
+      if(!ap->ppp_open)
+	break;
+      if(put_user(ppp_unit_number(&ap->chan), (int __user *)argp))
+	break;
+      DEBUG(FS_INFO, "Query unit number.\n");
+      err = 0;
+      break;
+
+      /* All these ioctls can be passed both directly and from ppp_generic,
+       * so we just deal with them in one place...
+       */
+    case PPPIOCGFLAGS:
+    case PPPIOCSFLAGS:
+    case PPPIOCGASYNCMAP:
+    case PPPIOCSASYNCMAP:
+    case PPPIOCGRASYNCMAP:
+    case PPPIOCSRASYNCMAP:
+    case PPPIOCGXASYNCMAP:
+    case PPPIOCSXASYNCMAP:
+    case PPPIOCGMRU:
+    case PPPIOCSMRU:
+      DEBUG(FS_INFO, "Standard PPP ioctl.\n");
+      if(!capable(CAP_NET_ADMIN))
+	err = -EPERM;
+      else
+	err = ppp_irnet_ioctl(&ap->chan, cmd, arg);
+      break;
+
+      /* TTY IOCTLs : Pretend that we are a tty, to keep pppd happy */
+      /* Get termios */
+    case TCGETS:
+      DEBUG(FS_INFO, "Get termios.\n");
+      if(kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios))
+	break;
+      err = 0;
+      break;
+      /* Set termios */
+    case TCSETSF:
+      DEBUG(FS_INFO, "Set termios.\n");
+      if(user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp))
+	break;
+      err = 0;
+      break;
+
+      /* Set DTR/RTS */
+    case TIOCMBIS: 
+    case TIOCMBIC:
+      /* Set exclusive/non-exclusive mode */
+    case TIOCEXCL:
+    case TIOCNXCL:
+      DEBUG(FS_INFO, "TTY compatibility.\n");
+      err = 0;
+      break;
+
+    case TCGETA:
+      DEBUG(FS_INFO, "TCGETA\n");
+      break;
+
+    case TCFLSH:
+      DEBUG(FS_INFO, "TCFLSH\n");
+      /* Note : this will flush buffers in PPP, so it *must* be done
+       * We should also worry that we don't accept junk here and that
+       * we get rid of our own buffers */
+#ifdef FLUSH_TO_PPP
+      ppp_output_wakeup(&ap->chan);
+#endif /* FLUSH_TO_PPP */
+      err = 0;
+      break;
+
+    case FIONREAD:
+      DEBUG(FS_INFO, "FIONREAD\n");
+      val = 0;
+      if(put_user(val, (int __user *)argp))
+	break;
+      err = 0;
+      break;
+
+    default:
+      DERROR(FS_ERROR, "Unsupported ioctl (0x%X)\n", cmd);
+      err = -ENOIOCTLCMD;
+    }
+
+  DEXIT(FS_TRACE, " - err = 0x%X\n", err);
+  return err;
+}
+
+/************************** PPP CALLBACKS **************************/
+/*
+ * This are the functions that the generic PPP driver in the kernel
+ * will call to communicate to us.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Prepare the ppp frame for transmission over the IrDA socket.
+ * We make sure that the header space is enough, and we change ppp header
+ * according to flags passed by pppd.
+ * This is not a callback, but just a helper function used in ppp_irnet_send()
+ */
+static inline struct sk_buff *
+irnet_prepare_skb(irnet_socket *	ap,
+		  struct sk_buff *	skb)
+{
+  unsigned char *	data;
+  int			proto;		/* PPP protocol */
+  int			islcp;		/* Protocol == LCP */
+  int			needaddr;	/* Need PPP address */
+
+  DENTER(PPP_TRACE, "(ap=0x%p, skb=0x%p)\n",
+	 ap, skb);
+
+  /* Extract PPP protocol from the frame */
+  data  = skb->data;
+  proto = (data[0] << 8) + data[1];
+
+  /* LCP packets with codes between 1 (configure-request)
+   * and 7 (code-reject) must be sent as though no options
+   * have been negotiated. */
+  islcp = (proto == PPP_LCP) && (1 <= data[2]) && (data[2] <= 7);
+
+  /* compress protocol field if option enabled */
+  if((data[0] == 0) && (ap->flags & SC_COMP_PROT) && (!islcp))
+    skb_pull(skb,1);
+
+  /* Check if we need address/control fields */
+  needaddr = 2*((ap->flags & SC_COMP_AC) == 0 || islcp);
+
+  /* Is the skb headroom large enough to contain all IrDA-headers? */
+  if((skb_headroom(skb) < (ap->max_header_size + needaddr)) ||
+      (skb_shared(skb)))
+    {
+      struct sk_buff *	new_skb;
+
+      DEBUG(PPP_INFO, "Reallocating skb\n");
+
+      /* Create a new skb */
+      new_skb = skb_realloc_headroom(skb, ap->max_header_size + needaddr);
+
+      /* We have to free the original skb anyway */
+      dev_kfree_skb(skb);
+
+      /* Did the realloc succeed ? */
+      DABORT(new_skb == NULL, NULL, PPP_ERROR, "Could not realloc skb\n");
+
+      /* Use the new skb instead */
+      skb = new_skb;
+    }
+
+  /* prepend address/control fields if necessary */
+  if(needaddr)
+    {
+      skb_push(skb, 2);
+      skb->data[0] = PPP_ALLSTATIONS;
+      skb->data[1] = PPP_UI;
+    }
+
+  DEXIT(PPP_TRACE, "\n");
+
+  return skb;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Send a packet to the peer over the IrTTP connection.
+ * Returns 1 iff the packet was accepted.
+ * Returns 0 iff packet was not consumed.
+ * If the packet was not accepted, we will call ppp_output_wakeup
+ * at some later time to reactivate flow control in ppp_generic.
+ */
+static int
+ppp_irnet_send(struct ppp_channel *	chan,
+	       struct sk_buff *		skb)
+{
+  irnet_socket *	self = (struct irnet_socket *) chan->private;
+  int			ret;
+
+  DENTER(PPP_TRACE, "(channel=0x%p, ap/self=0x%p)\n",
+	 chan, self);
+
+  /* Check if things are somewhat valid... */
+  DASSERT(self != NULL, 0, PPP_ERROR, "Self is NULL !!!\n");
+
+  /* Check if we are connected */
+  if(!(test_bit(0, &self->ttp_open)))
+    {
+#ifdef CONNECT_IN_SEND
+      /* Let's try to connect one more time... */
+      /* Note : we won't be connected after this call, but we should be
+       * ready for next packet... */
+      /* If we are already connecting, this will fail */
+      irda_irnet_connect(self);
+#endif /* CONNECT_IN_SEND */
+
+      DEBUG(PPP_INFO, "IrTTP not ready ! (%ld-%ld)\n",
+	    self->ttp_open, self->ttp_connect);
+
+      /* Note : we can either drop the packet or block the packet.
+       *
+       * Blocking the packet allow us a better connection time,
+       * because by calling ppp_output_wakeup() we can have
+       * ppp_generic resending the LCP request immediately to us,
+       * rather than waiting for one of pppd periodic transmission of
+       * LCP request.
+       *
+       * On the other hand, if we block all packet, all those periodic
+       * transmissions of pppd accumulate in ppp_generic, creating a
+       * backlog of LCP request. When we eventually connect later on,
+       * we have to transmit all this backlog before we can connect
+       * proper (if we don't timeout before).
+       *
+       * The current strategy is as follow :
+       * While we are attempting to connect, we block packets to get
+       * a better connection time.
+       * If we fail to connect, we drain the queue and start dropping packets
+       */
+#ifdef BLOCK_WHEN_CONNECT
+      /* If we are attempting to connect */
+      if(test_bit(0, &self->ttp_connect))
+	{
+	  /* Blocking packet, ppp_generic will retry later */
+	  return 0;
+	}
+#endif /* BLOCK_WHEN_CONNECT */
+
+      /* Dropping packet, pppd will retry later */
+      dev_kfree_skb(skb);
+      return 1;
+    }
+
+  /* Check if the queue can accept any packet, otherwise block */
+  if(self->tx_flow != FLOW_START)
+    DRETURN(0, PPP_INFO, "IrTTP queue full (%d skbs)...\n",
+	    skb_queue_len(&self->tsap->tx_queue));
+
+  /* Prepare ppp frame for transmission */
+  skb = irnet_prepare_skb(self, skb);
+  DABORT(skb == NULL, 1, PPP_ERROR, "Prepare skb for Tx failed.\n");
+
+  /* Send the packet to IrTTP */
+  ret = irttp_data_request(self->tsap, skb);
+  if(ret < 0)
+    {
+      /*   
+       * > IrTTPs tx queue is full, so we just have to
+       * > drop the frame! You might think that we should
+       * > just return -1 and don't deallocate the frame,
+       * > but that is dangerous since it's possible that
+       * > we have replaced the original skb with a new
+       * > one with larger headroom, and that would really
+       * > confuse do_dev_queue_xmit() in dev.c! I have
+       * > tried :-) DB 
+       * Correction : we verify the flow control above (self->tx_flow),
+       * so we come here only if IrTTP doesn't like the packet (empty,
+       * too large, IrTTP not connected). In those rare cases, it's ok
+       * to drop it, we don't want to see it here again...
+       * Jean II
+       */
+      DERROR(PPP_ERROR, "IrTTP doesn't like this packet !!! (0x%X)\n", ret);
+      /* irttp_data_request already free the packet */
+    }
+
+  DEXIT(PPP_TRACE, "\n");
+  return 1;	/* Packet has been consumed */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Take care of the ioctls that ppp_generic doesn't want to deal with...
+ * Note : we are also called from dev_irnet_ioctl().
+ */
+static int
+ppp_irnet_ioctl(struct ppp_channel *	chan,
+		unsigned int		cmd,
+		unsigned long		arg)
+{
+  irnet_socket *	ap = (struct irnet_socket *) chan->private;
+  int			err;
+  int			val;
+  u32			accm[8];
+  void __user *argp = (void __user *)arg;
+
+  DENTER(PPP_TRACE, "(channel=0x%p, ap=0x%p, cmd=0x%X)\n",
+	 chan, ap, cmd);
+
+  /* Basic checks... */
+  DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n");
+
+  err = -EFAULT;
+  switch(cmd)
+    {
+      /* PPP flags */
+    case PPPIOCGFLAGS:
+      val = ap->flags | ap->rbits;
+      if(put_user(val, (int __user *) argp))
+	break;
+      err = 0;
+      break;
+    case PPPIOCSFLAGS:
+      if(get_user(val, (int __user *) argp))
+	break;
+      ap->flags = val & ~SC_RCV_BITS;
+      ap->rbits = val & SC_RCV_BITS;
+      err = 0;
+      break;
+
+      /* Async map stuff - all dummy to please pppd */
+    case PPPIOCGASYNCMAP:
+      if(put_user(ap->xaccm[0], (u32 __user *) argp))
+	break;
+      err = 0;
+      break;
+    case PPPIOCSASYNCMAP:
+      if(get_user(ap->xaccm[0], (u32 __user *) argp))
+	break;
+      err = 0;
+      break;
+    case PPPIOCGRASYNCMAP:
+      if(put_user(ap->raccm, (u32 __user *) argp))
+	break;
+      err = 0;
+      break;
+    case PPPIOCSRASYNCMAP:
+      if(get_user(ap->raccm, (u32 __user *) argp))
+	break;
+      err = 0;
+      break;
+    case PPPIOCGXASYNCMAP:
+      if(copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm)))
+	break;
+      err = 0;
+      break;
+    case PPPIOCSXASYNCMAP:
+      if(copy_from_user(accm, argp, sizeof(accm)))
+	break;
+      accm[2] &= ~0x40000000U;		/* can't escape 0x5e */
+      accm[3] |= 0x60000000U;		/* must escape 0x7d, 0x7e */
+      memcpy(ap->xaccm, accm, sizeof(ap->xaccm));
+      err = 0;
+      break;
+
+      /* Max PPP frame size */
+    case PPPIOCGMRU:
+      if(put_user(ap->mru, (int __user *) argp))
+	break;
+      err = 0;
+      break;
+    case PPPIOCSMRU:
+      if(get_user(val, (int __user *) argp))
+	break;
+      if(val < PPP_MRU)
+	val = PPP_MRU;
+      ap->mru = val;
+      err = 0;
+      break;
+
+    default:
+      DEBUG(PPP_INFO, "Unsupported ioctl (0x%X)\n", cmd);
+      err = -ENOIOCTLCMD;
+    }
+
+  DEXIT(PPP_TRACE, " - err = 0x%X\n", err);
+  return err;
+}
+
+/************************** INITIALISATION **************************/
+/*
+ * Module initialisation and all that jazz...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Hook our device callbacks in the filesystem, to connect our code
+ * to /dev/irnet
+ */
+static inline int __init
+ppp_irnet_init(void)
+{
+  int err = 0;
+
+  DENTER(MODULE_TRACE, "()\n");
+
+  /* Allocate ourselves as a minor in the misc range */
+  err = misc_register(&irnet_misc_device);
+
+  DEXIT(MODULE_TRACE, "\n");
+  return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Cleanup at exit...
+ */
+static inline void __exit
+ppp_irnet_cleanup(void)
+{
+  DENTER(MODULE_TRACE, "()\n");
+
+  /* De-allocate /dev/irnet minor in misc range */
+  misc_deregister(&irnet_misc_device);
+
+  DEXIT(MODULE_TRACE, "\n");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Module main entry point
+ */
+int __init
+irnet_init(void)
+{
+  int err;
+
+  /* Initialise both parts... */
+  err = irda_irnet_init();
+  if(!err)
+    err = ppp_irnet_init();
+  return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Module exit
+ */
+static void __exit
+irnet_cleanup(void)
+{
+  irda_irnet_cleanup();
+  ppp_irnet_cleanup();
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Module magic
+ */
+module_init(irnet_init);
+module_exit(irnet_cleanup);
+MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("IrNET : Synchronous PPP over IrDA"); 
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV(10, 187);
diff --git a/net/irda/irnet/irnet_ppp.h b/net/irda/irnet/irnet_ppp.h
new file mode 100644
index 00000000000..d2beb7df8f7
--- /dev/null
+++ b/net/irda/irnet/irnet_ppp.h
@@ -0,0 +1,119 @@
+/*
+ *	IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ *		Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains all definitions and declarations necessary for the
+ * PPP part of the IrNET module.
+ * This file is a private header, so other modules don't want to know
+ * what's in there...
+ */
+
+#ifndef IRNET_PPP_H
+#define IRNET_PPP_H
+
+/***************************** INCLUDES *****************************/
+
+#include "irnet.h"		/* Module global include */
+
+/************************ CONSTANTS & MACROS ************************/
+
+/* /dev/irnet file constants */
+#define IRNET_MAJOR	10	/* Misc range */
+#define IRNET_MINOR	187	/* Official allocation */
+
+/* IrNET control channel stuff */
+#define IRNET_MAX_COMMAND	256	/* Max length of a command line */
+
+/* PPP hardcore stuff */
+
+/* Bits in rbits (PPP flags in irnet struct) */
+#define SC_RCV_BITS	(SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP)
+
+/* Bit numbers in busy */
+#define XMIT_BUSY	0
+#define RECV_BUSY	1
+#define XMIT_WAKEUP	2
+#define XMIT_FULL	3
+
+/* Queue management */
+#define PPPSYNC_MAX_RQLEN	32	/* arbitrary */
+
+/****************************** TYPES ******************************/
+
+
+/**************************** PROTOTYPES ****************************/
+
+/* ----------------------- CONTROL CHANNEL ----------------------- */
+static inline ssize_t
+	irnet_ctrl_write(irnet_socket *,
+			 const char *,
+			 size_t);
+static inline ssize_t
+	irnet_ctrl_read(irnet_socket *,
+			struct file *,
+			char *,
+			size_t);
+static inline unsigned int
+	irnet_ctrl_poll(irnet_socket *,
+			struct file *,
+			poll_table *);
+/* ----------------------- CHARACTER DEVICE ----------------------- */
+static int
+	dev_irnet_open(struct inode *,	/* fs callback : open */
+		       struct file *),
+	dev_irnet_close(struct inode *,
+			struct file *);
+static ssize_t
+	dev_irnet_write(struct file *,
+			const char __user *,
+			size_t,
+			loff_t *),
+	dev_irnet_read(struct file *,
+		       char __user *,
+		       size_t,
+		       loff_t *);
+static unsigned int
+	dev_irnet_poll(struct file *,
+		       poll_table *);
+static int
+	dev_irnet_ioctl(struct inode *,
+			struct file *,
+			unsigned int,
+			unsigned long);
+/* ------------------------ PPP INTERFACE ------------------------ */
+static inline struct sk_buff *
+	irnet_prepare_skb(irnet_socket *,
+			  struct sk_buff *);
+static int
+	ppp_irnet_send(struct ppp_channel *,
+		      struct sk_buff *);
+static int
+	ppp_irnet_ioctl(struct ppp_channel *,
+			unsigned int,
+			unsigned long);
+
+/**************************** VARIABLES ****************************/
+
+/* Filesystem callbacks (to call us) */
+static struct file_operations irnet_device_fops =
+{
+	.owner		= THIS_MODULE,
+	.read		= dev_irnet_read,
+	.write		= dev_irnet_write,
+	.poll		= dev_irnet_poll,
+	.ioctl		= dev_irnet_ioctl,
+	.open		= dev_irnet_open,
+	.release	= dev_irnet_close
+  /* Also : llseek, readdir, mmap, flush, fsync, fasync, lock, readv, writev */
+};
+
+/* Structure so that the misc major (drivers/char/misc.c) take care of us... */
+static struct miscdevice irnet_misc_device =
+{
+	IRNET_MINOR,
+	"irnet",
+	&irnet_device_fops
+};
+
+#endif /* IRNET_PPP_H */
diff --git a/net/irda/irproc.c b/net/irda/irproc.c
new file mode 100644
index 00000000000..88b9c43f637
--- /dev/null
+++ b/net/irda/irproc.c
@@ -0,0 +1,100 @@
+/*********************************************************************
+ *                
+ * Filename:      irproc.c
+ * Version:       1.0
+ * Description:   Various entries in the /proc file system
+ * Status:        Experimental.
+ * Author:        Thomas Davis, <ratbert@radiks.net>
+ * Created at:    Sat Feb 21 21:33:24 1998
+ * Modified at:   Sun Nov 14 08:54:54 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1998-1999, Dag Brattli <dagb@cs.uit.no>
+ *     Copyright (c) 1998, Thomas Davis, <ratbert@radiks.net>, 
+ *     All Rights Reserved.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     I, Thomas Davis, provide no warranty for any of this software. 
+ *     This material is provided "AS-IS" and at no charge. 
+ *     
+ ********************************************************************/
+
+#include <linux/miscdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+
+extern struct file_operations discovery_seq_fops;
+extern struct file_operations irlap_seq_fops;
+extern struct file_operations irlmp_seq_fops;
+extern struct file_operations irttp_seq_fops;
+extern struct file_operations irias_seq_fops;
+
+struct irda_entry {
+	const char *name;
+	struct file_operations *fops;
+};
+
+struct proc_dir_entry *proc_irda;
+EXPORT_SYMBOL(proc_irda);
+ 
+static struct irda_entry irda_dirs[] = {
+	{"discovery",	&discovery_seq_fops},
+	{"irttp",	&irttp_seq_fops},
+	{"irlmp",	&irlmp_seq_fops},
+	{"irlap",	&irlap_seq_fops},
+	{"irias",	&irias_seq_fops},
+};
+
+/*
+ * Function irda_proc_register (void)
+ *
+ *    Register irda entry in /proc file system
+ *
+ */
+void __init irda_proc_register(void) 
+{
+	int i;
+	struct proc_dir_entry *d;
+
+	proc_irda = proc_mkdir("irda", proc_net);
+	if (proc_irda == NULL)
+		return;
+	proc_irda->owner = THIS_MODULE;
+
+	for (i=0; i<ARRAY_SIZE(irda_dirs); i++) {
+		d = create_proc_entry(irda_dirs[i].name, 0, proc_irda);
+		if (d) 
+			d->proc_fops = irda_dirs[i].fops;
+	}
+}
+
+/*
+ * Function irda_proc_unregister (void)
+ *
+ *    Unregister irda entry in /proc file system
+ *
+ */
+void __exit irda_proc_unregister(void) 
+{
+	int i;
+
+        if (proc_irda) {
+                for (i=0; i<ARRAY_SIZE(irda_dirs); i++)
+                        remove_proc_entry(irda_dirs[i].name, proc_irda);
+
+                remove_proc_entry("irda", proc_net);
+                proc_irda = NULL;
+        }
+}
+
+
diff --git a/net/irda/irqueue.c b/net/irda/irqueue.c
new file mode 100644
index 00000000000..b0dd3ea3599
--- /dev/null
+++ b/net/irda/irqueue.c
@@ -0,0 +1,915 @@
+/*********************************************************************
+ *                
+ * Filename:      irqueue.c
+ * Version:       0.3
+ * Description:   General queue implementation
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Jun  9 13:29:31 1998
+ * Modified at:   Sun Dec 12 13:48:22 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Modified at:   Thu Jan  4 14:29:10 CET 2001
+ * Modified by:   Marc Zyngier <mzyngier@freesurf.fr>
+ * 
+ *     Copyright (C) 1998-1999, Aage Kvalnes <aage@cs.uit.no>
+ *     Copyright (C) 1998, Dag Brattli, 
+ *     All Rights Reserved.
+ *
+ *     This code is taken from the Vortex Operating System written by Aage
+ *     Kvalnes. Aage has agreed that this code can use the GPL licence,
+ *     although he does not use that licence in his own code.
+ *     
+ *     This copyright does however _not_ include the ELF hash() function
+ *     which I currently don't know which licence or copyright it
+ *     has. Please inform me if you know.
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+/*
+ * NOTE :
+ * There are various problems with this package :
+ *	o the hash function for ints is pathetic (but could be changed)
+ *	o locking is sometime suspicious (especially during enumeration)
+ *	o most users have only a few elements (== overhead)
+ *	o most users never use seach, so don't benefit from hashing
+ * Problem already fixed :
+ *	o not 64 bit compliant (most users do hashv = (int) self)
+ *	o hashbin_remove() is broken => use hashbin_remove_this()
+ * I think most users would be better served by a simple linked list
+ * (like include/linux/list.h) with a global spinlock per list.
+ * Jean II
+ */
+
+/*
+ * Notes on the concurrent access to hashbin and other SMP issues
+ * -------------------------------------------------------------
+ *	Hashbins are very often in the IrDA stack a global repository of
+ * information, and therefore used in a very asynchronous manner following
+ * various events (driver calls, timers, user calls...).
+ *	Therefore, very often it is highly important to consider the
+ * management of concurrent access to the hashbin and how to guarantee the
+ * consistency of the operations on it.
+ *
+ *	First, we need to define the objective of locking :
+ *		1) Protect user data (content pointed by the hashbin)
+ *		2) Protect hashbin structure itself (linked list in each bin)
+ *
+ *			     OLD LOCKING
+ *			     -----------
+ *
+ *	The previous locking strategy, either HB_LOCAL or HB_GLOBAL were
+ * both inadequate in *both* aspect.
+ *		o HB_GLOBAL was using a spinlock for each bin (local locking).
+ *		o HB_LOCAL was disabling irq on *all* CPUs, so use a single
+ *		  global semaphore.
+ *	The problems were :
+ *		A) Global irq disabling is no longer supported by the kernel
+ *		B) No protection for the hashbin struct global data
+ *			o hashbin_delete()
+ *			o hb_current
+ *		C) No protection for user data in some cases
+ *
+ *	A) HB_LOCAL use global irq disabling, so doesn't work on kernel
+ * 2.5.X. Even when it is supported (kernel 2.4.X and earlier), its
+ * performance is not satisfactory on SMP setups. Most hashbins were
+ * HB_LOCAL, so (A) definitely need fixing.
+ *	B) HB_LOCAL could be modified to fix (B). However, because HB_GLOBAL
+ * lock only the individual bins, it will never be able to lock the
+ * global data, so can't do (B).
+ *	C) Some functions return pointer to data that is still in the
+ * hashbin :
+ *		o hashbin_find()
+ *		o hashbin_get_first()
+ *		o hashbin_get_next()
+ *	As the data is still in the hashbin, it may be changed or free'd
+ * while the caller is examinimg the data. In those case, locking can't
+ * be done within the hashbin, but must include use of the data within
+ * the caller.
+ *	The caller can easily do this with HB_LOCAL (just disable irqs).
+ * However, this is impossible with HB_GLOBAL because the caller has no
+ * way to know the proper bin, so don't know which spinlock to use.
+ *
+ *	Quick summary : can no longer use HB_LOCAL, and HB_GLOBAL is
+ * fundamentally broken and will never work.
+ *
+ *			     NEW LOCKING
+ *			     -----------
+ *
+ *	To fix those problems, I've introduce a few changes in the
+ * hashbin locking :
+ *		1) New HB_LOCK scheme
+ *		2) hashbin->hb_spinlock
+ *		3) New hashbin usage policy
+ *
+ * HB_LOCK :
+ * -------
+ *	HB_LOCK is a locking scheme intermediate between the old HB_LOCAL
+ * and HB_GLOBAL. It uses a single spinlock to protect the whole content
+ * of the hashbin. As it is a single spinlock, it can protect the global
+ * data of the hashbin and not only the bins themselves.
+ *	HB_LOCK can only protect some of the hashbin calls, so it only lock
+ * call that can be made 100% safe and leave other call unprotected.
+ *	HB_LOCK in theory is slower than HB_GLOBAL, but as the hashbin
+ * content is always small contention is not high, so it doesn't matter
+ * much. HB_LOCK is probably faster than HB_LOCAL.
+ *
+ * hashbin->hb_spinlock :
+ * --------------------
+ *	The spinlock that HB_LOCK uses is available for caller, so that
+ * the caller can protect unprotected calls (see below).
+ *	If the caller want to do entirely its own locking (HB_NOLOCK), he
+ * can do so and may use safely this spinlock.
+ *	Locking is done like this :
+ *		spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+ *	Releasing the lock :
+ *		spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+ *
+ * Safe & Protected calls :
+ * ----------------------
+ *	The following calls are safe or protected via HB_LOCK :
+ *		o hashbin_new()		-> safe
+ *		o hashbin_delete()
+ *		o hashbin_insert()
+ *		o hashbin_remove_first()
+ *		o hashbin_remove()
+ *		o hashbin_remove_this()
+ *		o HASHBIN_GET_SIZE()	-> atomic
+ *
+ *	The following calls only protect the hashbin itself :
+ *		o hashbin_lock_find()
+ *		o hashbin_find_next()
+ *
+ * Unprotected calls :
+ * -----------------
+ *	The following calls need to be protected by the caller :
+ *		o hashbin_find()
+ *		o hashbin_get_first()
+ *		o hashbin_get_next()
+ *
+ * Locking Policy :
+ * --------------
+ *	If the hashbin is used only in a single thread of execution
+ * (explicitly or implicitely), you can use HB_NOLOCK
+ *	If the calling module already provide concurrent access protection,
+ * you may use HB_NOLOCK.
+ *
+ *	In all other cases, you need to use HB_LOCK and lock the hashbin
+ * every time before calling one of the unprotected calls. You also must
+ * use the pointer returned by the unprotected call within the locked
+ * region.
+ *
+ * Extra care for enumeration :
+ * --------------------------
+ *	hashbin_get_first() and hashbin_get_next() use the hashbin to
+ * store the current position, in hb_current.
+ *	As long as the hashbin remains locked, this is safe. If you unlock
+ * the hashbin, the current position may change if anybody else modify
+ * or enumerate the hashbin.
+ *	Summary : do the full enumeration while locked.
+ *
+ *	Alternatively, you may use hashbin_find_next(). But, this will
+ * be slower, is more complex to use and doesn't protect the hashbin
+ * content. So, care is needed here as well.
+ *
+ * Other issues :
+ * ------------
+ *	I believe that we are overdoing it by using spin_lock_irqsave()
+ * and we should use only spin_lock_bh() or similar. But, I don't have
+ * the balls to try it out.
+ *	Don't believe that because hashbin are now (somewhat) SMP safe
+ * that the rest of the code is. Higher layers tend to be safest,
+ * but LAP and LMP would need some serious dedicated love.
+ *
+ * Jean II
+ */
+#include <linux/module.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irqueue.h>
+
+/************************ QUEUE SUBROUTINES ************************/
+
+/*
+ * Hashbin
+ */
+#define GET_HASHBIN(x) ( x & HASHBIN_MASK )
+
+/*
+ * Function hash (name)
+ *
+ *    This function hash the input string 'name' using the ELF hash
+ *    function for strings.
+ */
+static __u32 hash( const char* name)
+{
+	__u32 h = 0;
+	__u32 g;
+	
+	while(*name) {
+		h = (h<<4) + *name++;
+		if ((g = (h & 0xf0000000)))
+			h ^=g>>24;
+		h &=~g;
+	}
+	return h;
+}
+
+/*
+ * Function enqueue_first (queue, proc)
+ *
+ *    Insert item first in queue.
+ *
+ */
+static void enqueue_first(irda_queue_t **queue, irda_queue_t* element)
+{
+	
+	IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+	/*
+	 * Check if queue is empty.
+	 */
+	if ( *queue == NULL ) {
+		/*
+		 * Queue is empty.  Insert one element into the queue.
+		 */
+		element->q_next = element->q_prev = *queue = element;
+		
+	} else {
+		/*
+		 * Queue is not empty.  Insert element into front of queue.
+		 */
+		element->q_next          = (*queue);
+		(*queue)->q_prev->q_next = element;
+		element->q_prev          = (*queue)->q_prev;
+		(*queue)->q_prev         = element;
+		(*queue)                 = element;
+	}
+}
+
+
+/*
+ * Function dequeue (queue)
+ *
+ *    Remove first entry in queue
+ *
+ */
+static irda_queue_t *dequeue_first(irda_queue_t **queue)
+{
+	irda_queue_t *ret;
+
+	IRDA_DEBUG( 4, "dequeue_first()\n");
+	
+	/*
+	 * Set return value
+	 */
+	ret =  *queue;
+	
+	if ( *queue == NULL ) {
+		/*
+		 * Queue was empty.
+		 */
+	} else if ( (*queue)->q_next == *queue ) {
+		/* 
+		 *  Queue only contained a single element. It will now be
+		 *  empty.  
+		 */
+		*queue = NULL;
+	} else {
+		/*
+		 * Queue contained several element.  Remove the first one.
+		 */
+		(*queue)->q_prev->q_next = (*queue)->q_next;
+		(*queue)->q_next->q_prev = (*queue)->q_prev;
+		*queue = (*queue)->q_next;
+	}
+	
+	/*
+	 * Return the removed entry (or NULL of queue was empty).
+	 */
+	return ret;
+}
+
+/*
+ * Function dequeue_general (queue, element)
+ *
+ *
+ */
+static irda_queue_t *dequeue_general(irda_queue_t **queue, irda_queue_t* element)
+{
+	irda_queue_t *ret;
+	
+	IRDA_DEBUG( 4, "dequeue_general()\n");
+	
+	/*
+	 * Set return value
+	 */
+	ret =  *queue;
+		
+	if ( *queue == NULL ) {
+		/*
+		 * Queue was empty.
+		 */
+	} else if ( (*queue)->q_next == *queue ) {
+		/* 
+		 *  Queue only contained a single element. It will now be
+		 *  empty.  
+		 */
+		*queue = NULL;
+		
+	} else {
+		/*
+		 *  Remove specific element.
+		 */
+		element->q_prev->q_next = element->q_next;
+		element->q_next->q_prev = element->q_prev;
+		if ( (*queue) == element)
+			(*queue) = element->q_next;
+	}
+	
+	/*
+	 * Return the removed entry (or NULL of queue was empty).
+	 */
+	return ret;
+}
+
+/************************ HASHBIN MANAGEMENT ************************/
+
+/*
+ * Function hashbin_create ( type, name )
+ *
+ *    Create hashbin!
+ *
+ */
+hashbin_t *hashbin_new(int type)
+{
+	hashbin_t* hashbin;
+	
+	/*
+	 * Allocate new hashbin
+	 */
+	hashbin = kmalloc( sizeof(hashbin_t), GFP_ATOMIC);
+	if (!hashbin)
+		return NULL;
+
+	/*
+	 * Initialize structure
+	 */
+	memset(hashbin, 0, sizeof(hashbin_t));
+	hashbin->hb_type = type;
+	hashbin->magic = HB_MAGIC;
+	//hashbin->hb_current = NULL;
+
+	/* Make sure all spinlock's are unlocked */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_lock_init(&hashbin->hb_spinlock);
+	}
+
+	return hashbin;
+}
+EXPORT_SYMBOL(hashbin_new);
+
+
+/*
+ * Function hashbin_delete (hashbin, free_func)
+ *
+ *    Destroy hashbin, the free_func can be a user supplied special routine 
+ *    for deallocating this structure if it's complex. If not the user can 
+ *    just supply kfree, which should take care of the job.
+ */
+int hashbin_delete( hashbin_t* hashbin, FREE_FUNC free_func)
+{
+	irda_queue_t* queue;
+	unsigned long flags = 0;
+	int i;
+
+	IRDA_ASSERT(hashbin != NULL, return -1;);
+	IRDA_ASSERT(hashbin->magic == HB_MAGIC, return -1;);
+	
+	/* Synchronize */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+	}
+
+	/*
+	 *  Free the entries in the hashbin, TODO: use hashbin_clear when
+	 *  it has been shown to work
+	 */
+	for (i = 0; i < HASHBIN_SIZE; i ++ ) {
+		queue = dequeue_first((irda_queue_t**) &hashbin->hb_queue[i]);
+		while (queue ) {
+			if (free_func)
+				(*free_func)(queue);
+			queue = dequeue_first( 
+				(irda_queue_t**) &hashbin->hb_queue[i]);
+		}
+	}
+	
+	/* Cleanup local data */
+	hashbin->hb_current = NULL;
+	hashbin->magic = ~HB_MAGIC;
+
+	/* Release lock */
+	if ( hashbin->hb_type & HB_LOCK) {
+		spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+	}
+
+	/*
+	 *  Free the hashbin structure
+	 */
+	kfree(hashbin);
+
+	return 0;
+}
+EXPORT_SYMBOL(hashbin_delete);
+
+/********************* HASHBIN LIST OPERATIONS *********************/
+
+/*
+ * Function hashbin_insert (hashbin, entry, name)
+ *
+ *    Insert an entry into the hashbin
+ *
+ */
+void hashbin_insert(hashbin_t* hashbin, irda_queue_t* entry, long hashv, 
+		    const char* name)
+{
+	unsigned long flags = 0;
+	int bin;
+
+	IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT( hashbin != NULL, return;);
+	IRDA_ASSERT( hashbin->magic == HB_MAGIC, return;);
+
+	/*
+	 * Locate hashbin
+	 */
+	if ( name )
+		hashv = hash( name );
+	bin = GET_HASHBIN( hashv );
+
+	/* Synchronize */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+	
+	/*
+	 * Store name and key
+	 */
+	entry->q_hash = hashv;
+	if ( name )
+		strlcpy( entry->q_name, name, sizeof(entry->q_name));
+	
+	/*
+	 * Insert new entry first
+	 */
+	enqueue_first( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+		       entry);
+	hashbin->hb_size++;
+
+	/* Release lock */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+}
+EXPORT_SYMBOL(hashbin_insert);
+
+/* 
+ *  Function hashbin_remove_first (hashbin)
+ *
+ *    Remove first entry of the hashbin
+ *
+ * Note : this function no longer use hashbin_remove(), but does things
+ * similar to hashbin_remove_this(), so can be considered safe.
+ * Jean II
+ */
+void *hashbin_remove_first( hashbin_t *hashbin)
+{
+	unsigned long flags = 0;
+	irda_queue_t *entry = NULL;
+
+	/* Synchronize */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+
+	entry = hashbin_get_first( hashbin);
+	if ( entry != NULL) {
+		int	bin;
+		long	hashv;
+		/*
+		 * Locate hashbin
+		 */
+		hashv = entry->q_hash;
+		bin = GET_HASHBIN( hashv );
+
+		/*
+		 * Dequeue the entry...
+		 */
+		dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+				 (irda_queue_t*) entry );
+		hashbin->hb_size--;
+		entry->q_next = NULL;
+		entry->q_prev = NULL;
+
+		/*
+		 *  Check if this item is the currently selected item, and in
+		 *  that case we must reset hb_current
+		 */
+		if ( entry == hashbin->hb_current)
+			hashbin->hb_current = NULL;
+	}
+
+	/* Release lock */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+
+	return entry;
+}
+
+
+/* 
+ *  Function hashbin_remove (hashbin, hashv, name)
+ *
+ *    Remove entry with the given name
+ *
+ *  The use of this function is highly discouraged, because the whole
+ *  concept behind hashbin_remove() is broken. In many cases, it's not
+ *  possible to guarantee the unicity of the index (either hashv or name),
+ *  leading to removing the WRONG entry.
+ *  The only simple safe use is :
+ *		hashbin_remove(hasbin, (int) self, NULL);
+ *  In other case, you must think hard to guarantee unicity of the index.
+ *  Jean II
+ */
+void* hashbin_remove( hashbin_t* hashbin, long hashv, const char* name)
+{
+	int bin, found = FALSE;
+	unsigned long flags = 0;
+	irda_queue_t* entry;
+
+	IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT( hashbin != NULL, return NULL;);
+	IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+	
+	/*
+	 * Locate hashbin
+	 */
+	if ( name )
+		hashv = hash( name );
+	bin = GET_HASHBIN( hashv );
+
+	/* Synchronize */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+
+	/*
+	 * Search for entry
+	 */
+	entry = hashbin->hb_queue[ bin ];
+	if ( entry ) {
+		do {
+			/*
+			 * Check for key
+			 */
+			if ( entry->q_hash == hashv ) {
+				/*
+				 * Name compare too?
+				 */
+				if ( name ) {
+					if ( strcmp( entry->q_name, name) == 0)
+					{
+						found = TRUE;
+						break;
+					}
+				} else {
+					found = TRUE;
+					break;
+				}
+			}
+			entry = entry->q_next;
+		} while ( entry != hashbin->hb_queue[ bin ] );
+	}
+	
+	/*
+	 * If entry was found, dequeue it
+	 */
+	if ( found ) {
+		dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+				 (irda_queue_t*) entry );
+		hashbin->hb_size--;
+
+		/*
+		 *  Check if this item is the currently selected item, and in
+		 *  that case we must reset hb_current
+		 */
+		if ( entry == hashbin->hb_current)
+			hashbin->hb_current = NULL;
+	}
+
+	/* Release lock */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+       
+	
+	/* Return */
+	if ( found ) 
+		return entry;
+	else
+		return NULL;
+	
+}
+EXPORT_SYMBOL(hashbin_remove);
+
+/* 
+ *  Function hashbin_remove_this (hashbin, entry)
+ *
+ *    Remove entry with the given name
+ *
+ * In some cases, the user of hashbin can't guarantee the unicity
+ * of either the hashv or name.
+ * In those cases, using the above function is guaranteed to cause troubles,
+ * so we use this one instead...
+ * And by the way, it's also faster, because we skip the search phase ;-)
+ */
+void* hashbin_remove_this( hashbin_t* hashbin, irda_queue_t* entry)
+{
+	unsigned long flags = 0;
+	int	bin;
+	long	hashv;
+
+	IRDA_DEBUG( 4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT( hashbin != NULL, return NULL;);
+	IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+	IRDA_ASSERT( entry != NULL, return NULL;);
+	
+	/* Synchronize */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+
+	/* Check if valid and not already removed... */
+	if((entry->q_next == NULL) || (entry->q_prev == NULL)) {
+		entry = NULL;
+		goto out;
+	}
+
+	/*
+	 * Locate hashbin
+	 */
+	hashv = entry->q_hash;
+	bin = GET_HASHBIN( hashv );
+
+	/*
+	 * Dequeue the entry...
+	 */
+	dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ],
+			 (irda_queue_t*) entry );
+	hashbin->hb_size--;
+	entry->q_next = NULL;
+	entry->q_prev = NULL;
+
+	/*
+	 *  Check if this item is the currently selected item, and in
+	 *  that case we must reset hb_current
+	 */
+	if ( entry == hashbin->hb_current)
+		hashbin->hb_current = NULL;
+out:
+	/* Release lock */
+	if ( hashbin->hb_type & HB_LOCK ) {
+		spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+	} /* Default is no-lock  */
+
+	return entry;
+}
+EXPORT_SYMBOL(hashbin_remove_this);
+
+/*********************** HASHBIN ENUMERATION ***********************/
+
+/*
+ * Function hashbin_common_find (hashbin, hashv, name)
+ *
+ *    Find item with the given hashv or name
+ *
+ */
+void* hashbin_find( hashbin_t* hashbin, long hashv, const char* name )
+{
+	int bin;
+	irda_queue_t* entry;
+
+	IRDA_DEBUG( 4, "hashbin_find()\n");
+
+	IRDA_ASSERT( hashbin != NULL, return NULL;);
+	IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+	/*
+	 * Locate hashbin
+	 */
+	if ( name )
+		hashv = hash( name );
+	bin = GET_HASHBIN( hashv );
+	
+	/*
+	 * Search for entry
+	 */
+	entry = hashbin->hb_queue[ bin];
+	if ( entry ) {
+		do {
+			/*
+			 * Check for key
+			 */
+			if ( entry->q_hash == hashv ) {
+				/*
+				 * Name compare too?
+				 */
+				if ( name ) {
+					if ( strcmp( entry->q_name, name ) == 0 ) {
+						return entry;
+					}
+				} else {
+					return entry;
+				}
+			}
+			entry = entry->q_next;
+		} while ( entry != hashbin->hb_queue[ bin ] );
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(hashbin_find);
+
+/*
+ * Function hashbin_lock_find (hashbin, hashv, name)
+ *
+ *    Find item with the given hashv or name
+ *
+ * Same, but with spinlock protection...
+ * I call it safe, but it's only safe with respect to the hashbin, not its
+ * content. - Jean II
+ */
+void* hashbin_lock_find( hashbin_t* hashbin, long hashv, const char* name )
+{
+	unsigned long flags = 0;
+	irda_queue_t* entry;
+
+	/* Synchronize */
+	spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+
+	/*
+	 * Search for entry
+	 */
+	entry = (irda_queue_t* ) hashbin_find( hashbin, hashv, name );
+
+	/* Release lock */
+	spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+
+	return entry;
+}
+EXPORT_SYMBOL(hashbin_lock_find);
+
+/*
+ * Function hashbin_find (hashbin, hashv, name, pnext)
+ *
+ *    Find an item with the given hashv or name, and its successor
+ *
+ * This function allow to do concurrent enumerations without the
+ * need to lock over the whole session, because the caller keep the
+ * context of the search. On the other hand, it might fail and return
+ * NULL if the entry is removed. - Jean II
+ */
+void* hashbin_find_next( hashbin_t* hashbin, long hashv, const char* name,
+			 void ** pnext)
+{
+	unsigned long flags = 0;
+	irda_queue_t* entry;
+
+	/* Synchronize */
+	spin_lock_irqsave(&hashbin->hb_spinlock, flags);
+
+	/*
+	 * Search for current entry
+	 * This allow to check if the current item is still in the
+	 * hashbin or has been removed.
+	 */
+	entry = (irda_queue_t* ) hashbin_find( hashbin, hashv, name );
+
+	/*
+	 * Trick hashbin_get_next() to return what we want
+	 */
+	if(entry) {
+		hashbin->hb_current = entry;
+		*pnext = hashbin_get_next( hashbin );
+	} else
+		*pnext = NULL;
+
+	/* Release lock */
+	spin_unlock_irqrestore(&hashbin->hb_spinlock, flags);
+
+	return entry;
+}
+EXPORT_SYMBOL(hashbin_find_next);
+
+/*
+ * Function hashbin_get_first (hashbin)
+ *
+ *    Get a pointer to first element in hashbin, this function must be
+ *    called before any calls to hashbin_get_next()!
+ *
+ */
+irda_queue_t *hashbin_get_first( hashbin_t* hashbin) 
+{
+	irda_queue_t *entry;
+	int i;
+
+	IRDA_ASSERT( hashbin != NULL, return NULL;);
+	IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+	if ( hashbin == NULL)
+		return NULL;
+
+	for ( i = 0; i < HASHBIN_SIZE; i ++ ) {
+		entry = hashbin->hb_queue[ i];
+		if ( entry) {
+			hashbin->hb_current = entry;
+			return entry;
+		}
+	}
+	/*
+	 *  Did not find any item in hashbin
+	 */
+	return NULL;
+}
+EXPORT_SYMBOL(hashbin_get_first);
+
+/*
+ * Function hashbin_get_next (hashbin)
+ *
+ *    Get next item in hashbin. A series of hashbin_get_next() calls must
+ *    be started by a call to hashbin_get_first(). The function returns
+ *    NULL when all items have been traversed
+ * 
+ * The context of the search is stored within the hashbin, so you must
+ * protect yourself from concurrent enumerations. - Jean II
+ */
+irda_queue_t *hashbin_get_next( hashbin_t *hashbin)
+{
+	irda_queue_t* entry;
+	int bin;
+	int i;
+
+	IRDA_ASSERT( hashbin != NULL, return NULL;);
+	IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;);
+
+	if ( hashbin->hb_current == NULL) {
+		IRDA_ASSERT( hashbin->hb_current != NULL, return NULL;);
+		return NULL;
+	}	
+	entry = hashbin->hb_current->q_next;
+	bin = GET_HASHBIN( entry->q_hash);
+
+	/*  
+	 *  Make sure that we are not back at the beginning of the queue
+	 *  again 
+	 */
+	if ( entry != hashbin->hb_queue[ bin ]) {
+		hashbin->hb_current = entry;
+
+		return entry;
+	}
+
+	/*
+	 *  Check that this is not the last queue in hashbin
+	 */
+	if ( bin >= HASHBIN_SIZE)
+		return NULL;
+	
+	/*
+	 *  Move to next queue in hashbin
+	 */
+	bin++;
+	for ( i = bin; i < HASHBIN_SIZE; i++ ) {
+		entry = hashbin->hb_queue[ i];
+		if ( entry) {
+			hashbin->hb_current = entry;
+			
+			return entry;
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(hashbin_get_next);
diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c
new file mode 100644
index 00000000000..1b1c4193359
--- /dev/null
+++ b/net/irda/irsysctl.c
@@ -0,0 +1,297 @@
+/*********************************************************************
+ *                
+ * Filename:      irsysctl.c
+ * Version:       1.0
+ * Description:   Sysctl interface for IrDA
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun May 24 22:12:06 1998
+ * Modified at:   Fri Jun  4 02:50:15 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli, All Rights Reserved.
+ *     Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *      
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *  
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *     
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/ctype.h>
+#include <linux/sysctl.h>
+#include <linux/init.h>
+
+#include <net/irda/irda.h>		/* irda_debug */
+#include <net/irda/irias_object.h>
+
+#define NET_IRDA 412 /* Random number */
+enum { DISCOVERY=1, DEVNAME, DEBUG, FAST_POLL, DISCOVERY_SLOTS,
+       DISCOVERY_TIMEOUT, SLOT_TIMEOUT, MAX_BAUD_RATE, MIN_TX_TURN_TIME,
+       MAX_TX_DATA_SIZE, MAX_TX_WINDOW, MAX_NOREPLY_TIME, WARN_NOREPLY_TIME,
+       LAP_KEEPALIVE_TIME };
+
+extern int  sysctl_discovery;
+extern int  sysctl_discovery_slots;
+extern int  sysctl_discovery_timeout;
+extern int  sysctl_slot_timeout;
+extern int  sysctl_fast_poll_increase;
+extern char sysctl_devname[];
+extern int  sysctl_max_baud_rate;
+extern int  sysctl_min_tx_turn_time;
+extern int  sysctl_max_tx_data_size;
+extern int  sysctl_max_tx_window;
+extern int  sysctl_max_noreply_time;
+extern int  sysctl_warn_noreply_time;
+extern int  sysctl_lap_keepalive_time;
+
+/* this is needed for the proc_dointvec_minmax - Jean II */
+static int max_discovery_slots = 16;		/* ??? */
+static int min_discovery_slots = 1;
+/* IrLAP 6.13.2 says 25ms to 10+70ms - allow higher since some devices
+ * seems to require it. (from Dag's comment) */
+static int max_slot_timeout = 160;
+static int min_slot_timeout = 20;
+static int max_max_baud_rate = 16000000;	/* See qos.c - IrLAP spec */
+static int min_max_baud_rate = 2400;
+static int max_min_tx_turn_time = 10000;	/* See qos.c - IrLAP spec */
+static int min_min_tx_turn_time;
+static int max_max_tx_data_size = 2048;		/* See qos.c - IrLAP spec */
+static int min_max_tx_data_size = 64;
+static int max_max_tx_window = 7;		/* See qos.c - IrLAP spec */
+static int min_max_tx_window = 1;
+static int max_max_noreply_time = 40;		/* See qos.c - IrLAP spec */
+static int min_max_noreply_time = 3;
+static int max_warn_noreply_time = 3;		/* 3s == standard */
+static int min_warn_noreply_time = 1;		/* 1s == min WD_TIMER */
+static int max_lap_keepalive_time = 10000;	/* 10s */
+static int min_lap_keepalive_time = 100;	/* 100us */
+/* For other sysctl, I've no idea of the range. Maybe Dag could help
+ * us on that - Jean II */
+
+static int do_devname(ctl_table *table, int write, struct file *filp,
+		      void __user *buffer, size_t *lenp, loff_t *ppos)
+{
+	int ret;
+
+	ret = proc_dostring(table, write, filp, buffer, lenp, ppos);
+	if (ret == 0 && write) {
+		struct ias_value *val;
+
+		val = irias_new_string_value(sysctl_devname);
+		if (val)
+			irias_object_change_attribute("Device", "DeviceName", val);
+	}
+	return ret;
+}
+
+/* One file */
+static ctl_table irda_table[] = {
+	{
+		.ctl_name	= DISCOVERY,
+		.procname	= "discovery",
+		.data		= &sysctl_discovery,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec
+	},
+	{
+		.ctl_name	= DEVNAME,
+		.procname	= "devname",
+		.data		= sysctl_devname,
+		.maxlen		= 65,
+		.mode		= 0644,
+		.proc_handler	= &do_devname,
+		.strategy	= &sysctl_string
+	},
+#ifdef CONFIG_IRDA_DEBUG
+        {
+		.ctl_name	= DEBUG,
+		.procname	= "debug",
+		.data		= &irda_debug,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec
+	},
+#endif
+#ifdef CONFIG_IRDA_FAST_RR
+        {
+		.ctl_name	= FAST_POLL,
+		.procname	= "fast_poll_increase",
+		.data		= &sysctl_fast_poll_increase,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec
+	},
+#endif
+	{
+		.ctl_name	= DISCOVERY_SLOTS,
+		.procname	= "discovery_slots",
+		.data		= &sysctl_discovery_slots,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_discovery_slots,
+		.extra2		= &max_discovery_slots
+	},
+	{
+		.ctl_name	= DISCOVERY_TIMEOUT,
+		.procname	= "discovery_timeout",
+		.data		= &sysctl_discovery_timeout,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec
+	},
+	{
+		.ctl_name	= SLOT_TIMEOUT,
+		.procname	= "slot_timeout",
+		.data		= &sysctl_slot_timeout,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_slot_timeout,
+		.extra2		= &max_slot_timeout
+	},
+	{
+		.ctl_name	= MAX_BAUD_RATE,
+		.procname	= "max_baud_rate",
+		.data		= &sysctl_max_baud_rate,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_max_baud_rate,
+		.extra2		= &max_max_baud_rate
+	},
+	{
+		.ctl_name	= MIN_TX_TURN_TIME,
+		.procname	= "min_tx_turn_time",
+		.data		= &sysctl_min_tx_turn_time,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_min_tx_turn_time,
+		.extra2		= &max_min_tx_turn_time
+	},
+	{
+		.ctl_name	= MAX_TX_DATA_SIZE,
+		.procname	= "max_tx_data_size",
+		.data		= &sysctl_max_tx_data_size,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_max_tx_data_size,
+		.extra2		= &max_max_tx_data_size
+	},
+	{
+		.ctl_name	= MAX_TX_WINDOW,
+		.procname	= "max_tx_window",
+		.data		= &sysctl_max_tx_window,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_max_tx_window,
+		.extra2		= &max_max_tx_window
+	},
+	{
+		.ctl_name	= MAX_NOREPLY_TIME,
+		.procname	= "max_noreply_time",
+		.data		= &sysctl_max_noreply_time,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_max_noreply_time,
+		.extra2		= &max_max_noreply_time
+	},
+	{
+		.ctl_name	= WARN_NOREPLY_TIME,
+		.procname	= "warn_noreply_time",
+		.data		= &sysctl_warn_noreply_time,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_warn_noreply_time,
+		.extra2		= &max_warn_noreply_time
+	},
+	{
+		.ctl_name	= LAP_KEEPALIVE_TIME,
+		.procname	= "lap_keepalive_time",
+		.data		= &sysctl_lap_keepalive_time,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.strategy	= &sysctl_intvec,
+		.extra1		= &min_lap_keepalive_time,
+		.extra2		= &max_lap_keepalive_time
+	},
+	{ .ctl_name = 0 }
+};
+
+/* One directory */
+static ctl_table irda_net_table[] = {
+	{
+		.ctl_name	= NET_IRDA,
+		.procname	= "irda",
+		.maxlen		= 0,
+		.mode		= 0555,
+		.child		= irda_table
+	},
+	{ .ctl_name = 0 }
+};
+
+/* The parent directory */
+static ctl_table irda_root_table[] = {
+	{
+		.ctl_name	= CTL_NET,
+		.procname	= "net",
+		.maxlen		= 0,
+		.mode		= 0555,
+		.child		= irda_net_table
+	},
+	{ .ctl_name = 0 }
+};
+
+static struct ctl_table_header *irda_table_header;
+
+/*
+ * Function irda_sysctl_register (void)
+ *
+ *    Register our sysctl interface
+ *
+ */
+int __init irda_sysctl_register(void)
+{
+	irda_table_header = register_sysctl_table(irda_root_table, 0);
+	if (!irda_table_header)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * Function irda_sysctl_unregister (void)
+ *
+ *    Unregister our sysctl interface
+ *
+ */
+void __exit irda_sysctl_unregister(void) 
+{
+	unregister_sysctl_table(irda_table_header);
+}
+
+
+
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
new file mode 100644
index 00000000000..d091ccf773b
--- /dev/null
+++ b/net/irda/irttp.c
@@ -0,0 +1,1912 @@
+/*********************************************************************
+ *                
+ * Filename:      irttp.c
+ * Version:       1.2
+ * Description:   Tiny Transport Protocol (TTP) implementation
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sun Aug 31 20:14:31 1997
+ * Modified at:   Wed Jan  5 11:31:27 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/parameters.h>
+#include <net/irda/irttp.h>
+
+static struct irttp_cb *irttp = NULL;
+
+static void __irttp_close_tsap(struct tsap_cb *self);
+
+static int irttp_data_indication(void *instance, void *sap, 
+				 struct sk_buff *skb);
+static int irttp_udata_indication(void *instance, void *sap, 
+				  struct sk_buff *skb);
+static void irttp_disconnect_indication(void *instance, void *sap,  
+					LM_REASON reason, struct sk_buff *);
+static void irttp_connect_indication(void *instance, void *sap, 
+				     struct qos_info *qos, __u32 max_sdu_size,
+				     __u8 header_size, struct sk_buff *skb);
+static void irttp_connect_confirm(void *instance, void *sap, 
+				  struct qos_info *qos, __u32 max_sdu_size, 
+				  __u8 header_size, struct sk_buff *skb);
+static void irttp_run_tx_queue(struct tsap_cb *self);
+static void irttp_run_rx_queue(struct tsap_cb *self);
+
+static void irttp_flush_queues(struct tsap_cb *self);
+static void irttp_fragment_skb(struct tsap_cb *self, struct sk_buff *skb);
+static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self);
+static void irttp_todo_expired(unsigned long data);
+static int irttp_param_max_sdu_size(void *instance, irda_param_t *param, 
+				    int get);
+
+static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow);
+static void irttp_status_indication(void *instance,
+				    LINK_STATUS link, LOCK_STATUS lock);
+
+/* Information for parsing parameters in IrTTP */
+static pi_minor_info_t pi_minor_call_table[] = {
+	{ NULL, 0 },                                             /* 0x00 */
+	{ irttp_param_max_sdu_size, PV_INTEGER | PV_BIG_ENDIAN } /* 0x01 */
+};
+static pi_major_info_t pi_major_call_table[] = {{ pi_minor_call_table, 2 }};
+static pi_param_info_t param_info = { pi_major_call_table, 1, 0x0f, 4 };
+
+/************************ GLOBAL PROCEDURES ************************/
+
+/*
+ * Function irttp_init (void)
+ *
+ *    Initialize the IrTTP layer. Called by module initialization code
+ *
+ */
+int __init irttp_init(void)
+{
+	/* Initialize the irttp structure. */
+	if (irttp == NULL) {
+		irttp = kmalloc(sizeof(struct irttp_cb), GFP_KERNEL);
+		if (irttp == NULL)
+			return -ENOMEM;
+	}
+	memset(irttp, 0, sizeof(struct irttp_cb));
+
+	irttp->magic = TTP_MAGIC;
+
+	irttp->tsaps = hashbin_new(HB_LOCK);
+	if (!irttp->tsaps) {
+		IRDA_ERROR("%s: can't allocate IrTTP hashbin!\n",
+			   __FUNCTION__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * Function irttp_cleanup (void)
+ *
+ *    Called by module destruction/cleanup code
+ *
+ */
+void __exit irttp_cleanup(void) 
+{
+	/* Check for main structure */
+	IRDA_ASSERT(irttp != NULL, return;);
+	IRDA_ASSERT(irttp->magic == TTP_MAGIC, return;);
+
+	/*
+	 *  Delete hashbin and close all TSAP instances in it
+	 */
+	hashbin_delete(irttp->tsaps, (FREE_FUNC) __irttp_close_tsap);
+
+	irttp->magic = 0;
+
+	/* De-allocate main structure */
+	kfree(irttp);
+
+	irttp = NULL;
+}
+
+/*************************** SUBROUTINES ***************************/
+
+/*
+ * Function irttp_start_todo_timer (self, timeout)
+ *
+ *    Start todo timer.
+ *
+ * Made it more effient and unsensitive to race conditions - Jean II
+ */
+static inline void irttp_start_todo_timer(struct tsap_cb *self, int timeout)
+{
+	/* Set new value for timer */
+	mod_timer(&self->todo_timer, jiffies + timeout);
+}
+
+/*
+ * Function irttp_todo_expired (data)
+ *
+ *    Todo timer has expired!
+ *
+ * One of the restriction of the timer is that it is run only on the timer
+ * interrupt which run every 10ms. This mean that even if you set the timer
+ * with a delay of 0, it may take up to 10ms before it's run.
+ * So, to minimise latency and keep cache fresh, we try to avoid using
+ * it as much as possible.
+ * Note : we can't use tasklets, because they can't be asynchronously
+ * killed (need user context), and we can't guarantee that here...
+ * Jean II
+ */
+static void irttp_todo_expired(unsigned long data)
+{
+	struct tsap_cb *self = (struct tsap_cb *) data;
+
+	/* Check that we still exist */
+	if (!self || self->magic != TTP_TSAP_MAGIC)
+		return;
+
+	IRDA_DEBUG(4, "%s(instance=%p)\n", __FUNCTION__, self);
+
+	/* Try to make some progress, especially on Tx side - Jean II */
+	irttp_run_rx_queue(self);
+	irttp_run_tx_queue(self);
+
+	/* Check if time for disconnect */
+	if (test_bit(0, &self->disconnect_pend)) {
+		/* Check if it's possible to disconnect yet */
+		if (skb_queue_empty(&self->tx_queue)) {
+			/* Make sure disconnect is not pending anymore */
+			clear_bit(0, &self->disconnect_pend);	/* FALSE */
+
+			/* Note : self->disconnect_skb may be NULL */
+			irttp_disconnect_request(self, self->disconnect_skb,
+						 P_NORMAL);
+			self->disconnect_skb = NULL;
+		} else {
+			/* Try again later */
+			irttp_start_todo_timer(self, HZ/10);
+
+			/* No reason to try and close now */
+			return;
+		}
+	}
+
+	/* Check if it's closing time */
+	if (self->close_pend)
+		/* Finish cleanup */
+		irttp_close_tsap(self);
+}
+
+/*
+ * Function irttp_flush_queues (self)
+ *
+ *     Flushes (removes all frames) in transitt-buffer (tx_list)
+ */
+void irttp_flush_queues(struct tsap_cb *self)
+{
+	struct sk_buff* skb;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	/* Deallocate frames waiting to be sent */
+	while ((skb = skb_dequeue(&self->tx_queue)) != NULL)
+		dev_kfree_skb(skb);
+
+	/* Deallocate received frames */
+	while ((skb = skb_dequeue(&self->rx_queue)) != NULL)
+		dev_kfree_skb(skb);
+
+	/* Deallocate received fragments */
+	while ((skb = skb_dequeue(&self->rx_fragments)) != NULL)
+		dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_reassemble (self)
+ *
+ *    Makes a new (continuous) skb of all the fragments in the fragment
+ *    queue
+ *
+ */
+static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self)
+{
+	struct sk_buff *skb, *frag;
+	int n = 0;  /* Fragment index */
+
+	IRDA_ASSERT(self != NULL, return NULL;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return NULL;);
+
+	IRDA_DEBUG(2, "%s(), self->rx_sdu_size=%d\n", __FUNCTION__,
+		   self->rx_sdu_size);
+
+	skb = dev_alloc_skb(TTP_HEADER + self->rx_sdu_size);
+	if (!skb)
+		return NULL;
+
+	/*
+	 * Need to reserve space for TTP header in case this skb needs to
+	 * be requeued in case delivery failes
+	 */
+	skb_reserve(skb, TTP_HEADER);
+	skb_put(skb, self->rx_sdu_size);
+
+	/*
+	 *  Copy all fragments to a new buffer
+	 */
+	while ((frag = skb_dequeue(&self->rx_fragments)) != NULL) {
+		memcpy(skb->data+n, frag->data, frag->len);
+		n += frag->len;
+
+		dev_kfree_skb(frag);
+	}
+
+	IRDA_DEBUG(2,
+		   "%s(), frame len=%d, rx_sdu_size=%d, rx_max_sdu_size=%d\n",
+		   __FUNCTION__, n, self->rx_sdu_size, self->rx_max_sdu_size);
+	/* Note : irttp_run_rx_queue() calculate self->rx_sdu_size
+	 * by summing the size of all fragments, so we should always
+	 * have n == self->rx_sdu_size, except in cases where we
+	 * droped the last fragment (when self->rx_sdu_size exceed
+	 * self->rx_max_sdu_size), where n < self->rx_sdu_size.
+	 * Jean II */
+	IRDA_ASSERT(n <= self->rx_sdu_size, n = self->rx_sdu_size;);
+
+	/* Set the new length */
+	skb_trim(skb, n);
+
+	self->rx_sdu_size = 0;
+
+	return skb;
+}
+
+/*
+ * Function irttp_fragment_skb (skb)
+ *
+ *    Fragments a frame and queues all the fragments for transmission
+ *
+ */
+static inline void irttp_fragment_skb(struct tsap_cb *self,
+				      struct sk_buff *skb)
+{
+	struct sk_buff *frag;
+	__u8 *frame;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	/*
+	 *  Split frame into a number of segments
+	 */
+	while (skb->len > self->max_seg_size) {
+		IRDA_DEBUG(2, "%s(), fragmenting ...\n", __FUNCTION__);
+
+		/* Make new segment */
+		frag = dev_alloc_skb(self->max_seg_size+self->max_header_size);
+		if (!frag)
+			return;
+
+		skb_reserve(frag, self->max_header_size);
+
+		/* Copy data from the original skb into this fragment. */
+		memcpy(skb_put(frag, self->max_seg_size), skb->data,
+		       self->max_seg_size);
+
+		/* Insert TTP header, with the more bit set */
+		frame = skb_push(frag, TTP_HEADER);
+		frame[0] = TTP_MORE;
+
+		/* Hide the copied data from the original skb */
+		skb_pull(skb, self->max_seg_size);
+
+		/* Queue fragment */
+		skb_queue_tail(&self->tx_queue, frag);
+	}
+	/* Queue what is left of the original skb */
+	IRDA_DEBUG(2, "%s(), queuing last segment\n", __FUNCTION__);
+
+	frame = skb_push(skb, TTP_HEADER);
+	frame[0] = 0x00; /* Clear more bit */
+
+	/* Queue fragment */
+	skb_queue_tail(&self->tx_queue, skb);
+}
+
+/*
+ * Function irttp_param_max_sdu_size (self, param)
+ *
+ *    Handle the MaxSduSize parameter in the connect frames, this function
+ *    will be called both when this parameter needs to be inserted into, and
+ *    extracted from the connect frames
+ */
+static int irttp_param_max_sdu_size(void *instance, irda_param_t *param,
+				    int get)
+{
+	struct tsap_cb *self;
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+	if (get)
+		param->pv.i = self->tx_max_sdu_size;
+	else
+		self->tx_max_sdu_size = param->pv.i;
+
+	IRDA_DEBUG(1, "%s(), MaxSduSize=%d\n", __FUNCTION__, param->pv.i);
+
+	return 0;
+}
+
+/*************************** CLIENT CALLS ***************************/
+/************************** LMP CALLBACKS **************************/
+/* Everything is happily mixed up. Waiting for next clean up - Jean II */
+
+/*
+ * Function irttp_open_tsap (stsap, notify)
+ *
+ *    Create TSAP connection endpoint,
+ */
+struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify)
+{
+	struct tsap_cb *self;
+	struct lsap_cb *lsap;
+	notify_t ttp_notify;
+
+	IRDA_ASSERT(irttp != NULL, return NULL;);
+	IRDA_ASSERT(irttp->magic == TTP_MAGIC, return NULL;);
+
+	/* The IrLMP spec (IrLMP 1.1 p10) says that we have the right to
+	 * use only 0x01-0x6F. Of course, we can use LSAP_ANY as well.
+	 * JeanII */
+	if((stsap_sel != LSAP_ANY) &&
+	   ((stsap_sel < 0x01) || (stsap_sel >= 0x70))) {
+		IRDA_DEBUG(0, "%s(), invalid tsap!\n", __FUNCTION__);
+		return NULL;
+	}
+
+	self = kmalloc(sizeof(struct tsap_cb), GFP_ATOMIC);
+	if (self == NULL) {
+		IRDA_DEBUG(0, "%s(), unable to kmalloc!\n", __FUNCTION__);
+		return NULL;
+	}
+	memset(self, 0, sizeof(struct tsap_cb));
+	spin_lock_init(&self->lock);
+
+	/* Initialise todo timer */
+	init_timer(&self->todo_timer);
+	self->todo_timer.data     = (unsigned long) self;
+	self->todo_timer.function = &irttp_todo_expired;
+
+	/* Initialize callbacks for IrLMP to use */
+	irda_notify_init(&ttp_notify);
+	ttp_notify.connect_confirm = irttp_connect_confirm;
+	ttp_notify.connect_indication = irttp_connect_indication;
+	ttp_notify.disconnect_indication = irttp_disconnect_indication;
+	ttp_notify.data_indication = irttp_data_indication;
+	ttp_notify.udata_indication = irttp_udata_indication;
+	ttp_notify.flow_indication = irttp_flow_indication;
+	if(notify->status_indication != NULL)
+		ttp_notify.status_indication = irttp_status_indication;
+	ttp_notify.instance = self;
+	strncpy(ttp_notify.name, notify->name, NOTIFY_MAX_NAME);
+
+	self->magic = TTP_TSAP_MAGIC;
+	self->connected = FALSE;
+
+	skb_queue_head_init(&self->rx_queue);
+	skb_queue_head_init(&self->tx_queue);
+	skb_queue_head_init(&self->rx_fragments);
+	/*
+	 *  Create LSAP at IrLMP layer
+	 */
+	lsap = irlmp_open_lsap(stsap_sel, &ttp_notify, 0);
+	if (lsap == NULL) {
+		IRDA_WARNING("%s: unable to allocate LSAP!!\n", __FUNCTION__);
+		return NULL;
+	}
+
+	/*
+	 *  If user specified LSAP_ANY as source TSAP selector, then IrLMP
+	 *  will replace it with whatever source selector which is free, so
+	 *  the stsap_sel we have might not be valid anymore
+	 */
+	self->stsap_sel = lsap->slsap_sel;
+	IRDA_DEBUG(4, "%s(), stsap_sel=%02x\n", __FUNCTION__, self->stsap_sel);
+
+	self->notify = *notify;
+	self->lsap = lsap;
+
+	hashbin_insert(irttp->tsaps, (irda_queue_t *) self, (long) self, NULL);
+
+	if (credit > TTP_RX_MAX_CREDIT)
+		self->initial_credit = TTP_RX_MAX_CREDIT;
+	else
+		self->initial_credit = credit;
+
+	return self;
+}
+EXPORT_SYMBOL(irttp_open_tsap);
+
+/*
+ * Function irttp_close (handle)
+ *
+ *    Remove an instance of a TSAP. This function should only deal with the
+ *    deallocation of the TSAP, and resetting of the TSAPs values;
+ *
+ */
+static void __irttp_close_tsap(struct tsap_cb *self)
+{
+	/* First make sure we're connected. */
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	irttp_flush_queues(self);
+
+	del_timer(&self->todo_timer);
+
+	/* This one won't be cleaned up if we are disconnect_pend + close_pend
+	 * and we receive a disconnect_indication */
+	if (self->disconnect_skb)
+		dev_kfree_skb(self->disconnect_skb);
+
+	self->connected = FALSE;
+	self->magic = ~TTP_TSAP_MAGIC;
+
+	kfree(self);
+}
+
+/*
+ * Function irttp_close (self)
+ *
+ *    Remove TSAP from list of all TSAPs and then deallocate all resources
+ *    associated with this TSAP
+ *
+ * Note : because we *free* the tsap structure, it is the responsibility
+ * of the caller to make sure we are called only once and to deal with
+ * possible race conditions. - Jean II
+ */
+int irttp_close_tsap(struct tsap_cb *self)
+{
+	struct tsap_cb *tsap;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+	/* Make sure tsap has been disconnected */
+	if (self->connected) {
+		/* Check if disconnect is not pending */
+		if (!test_bit(0, &self->disconnect_pend)) {
+			IRDA_WARNING("%s: TSAP still connected!\n",
+				     __FUNCTION__);
+			irttp_disconnect_request(self, NULL, P_NORMAL);
+		}
+		self->close_pend = TRUE;
+		irttp_start_todo_timer(self, HZ/10);
+
+		return 0; /* Will be back! */
+	}
+
+	tsap = hashbin_remove(irttp->tsaps, (long) self, NULL);
+
+	IRDA_ASSERT(tsap == self, return -1;);
+
+	/* Close corresponding LSAP */
+	if (self->lsap) {
+		irlmp_close_lsap(self->lsap);
+		self->lsap = NULL;
+	}
+
+	__irttp_close_tsap(self);
+
+	return 0;
+}
+EXPORT_SYMBOL(irttp_close_tsap);
+
+/*
+ * Function irttp_udata_request (self, skb)
+ *
+ *    Send unreliable data on this TSAP
+ *
+ */
+int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
+{
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	/* Check that nothing bad happens */
+	if ((skb->len == 0) || (!self->connected)) {
+		IRDA_DEBUG(1, "%s(), No data, or not connected\n",
+			   __FUNCTION__);
+		goto err;
+	}
+
+	if (skb->len > self->max_seg_size) {
+		IRDA_DEBUG(1, "%s(), UData is to large for IrLAP!\n",
+			   __FUNCTION__);
+		goto err;
+	}
+
+	irlmp_udata_request(self->lsap, skb);
+	self->stats.tx_packets++;
+
+	return 0;
+
+err:
+	dev_kfree_skb(skb);
+	return -1;
+}
+EXPORT_SYMBOL(irttp_udata_request);
+
+
+/*
+ * Function irttp_data_request (handle, skb)
+ *
+ *    Queue frame for transmission. If SAR is enabled, fragement the frame
+ *    and queue the fragments for transmission
+ */
+int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb)
+{
+	__u8 *frame;
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	IRDA_DEBUG(2, "%s() : queue len = %d\n", __FUNCTION__,
+		   skb_queue_len(&self->tx_queue));
+
+	/* Check that nothing bad happens */
+	if ((skb->len == 0) || (!self->connected)) {
+		IRDA_WARNING("%s: No data, or not connected\n", __FUNCTION__);
+		ret = -ENOTCONN;
+		goto err;
+	}
+
+	/*
+	 *  Check if SAR is disabled, and the frame is larger than what fits
+	 *  inside an IrLAP frame
+	 */
+	if ((self->tx_max_sdu_size == 0) && (skb->len > self->max_seg_size)) {
+		IRDA_ERROR("%s: SAR disabled, and data is to large for IrLAP!\n",
+			   __FUNCTION__);
+		ret = -EMSGSIZE;
+		goto err;
+	}
+
+	/*
+	 *  Check if SAR is enabled, and the frame is larger than the
+	 *  TxMaxSduSize
+	 */
+	if ((self->tx_max_sdu_size != 0) &&
+	    (self->tx_max_sdu_size != TTP_SAR_UNBOUND) &&
+	    (skb->len > self->tx_max_sdu_size))
+	{
+		IRDA_ERROR("%s: SAR enabled, but data is larger than TxMaxSduSize!\n",
+			   __FUNCTION__);
+		ret = -EMSGSIZE;
+		goto err;
+	}
+	/*
+	 *  Check if transmit queue is full
+	 */
+	if (skb_queue_len(&self->tx_queue) >= TTP_TX_MAX_QUEUE) {
+		/*
+		 *  Give it a chance to empty itself
+		 */
+		irttp_run_tx_queue(self);
+
+		/* Drop packet. This error code should trigger the caller
+		 * to resend the data in the client code - Jean II */
+		ret = -ENOBUFS;
+		goto err;
+	}
+
+	/* Queue frame, or queue frame segments */
+	if ((self->tx_max_sdu_size == 0) || (skb->len < self->max_seg_size)) {
+		/* Queue frame */
+		IRDA_ASSERT(skb_headroom(skb) >= TTP_HEADER, return -1;);
+		frame = skb_push(skb, TTP_HEADER);
+		frame[0] = 0x00; /* Clear more bit */
+
+		skb_queue_tail(&self->tx_queue, skb);
+	} else {
+		/*
+		 *  Fragment the frame, this function will also queue the
+		 *  fragments, we don't care about the fact the transmit
+		 *  queue may be overfilled by all the segments for a little
+		 *  while
+		 */
+		irttp_fragment_skb(self, skb);
+	}
+
+	/* Check if we can accept more data from client */
+	if ((!self->tx_sdu_busy) &&
+	    (skb_queue_len(&self->tx_queue) > TTP_TX_HIGH_THRESHOLD)) {
+		/* Tx queue filling up, so stop client. */
+		if (self->notify.flow_indication) {
+			self->notify.flow_indication(self->notify.instance,
+						     self, FLOW_STOP);
+		}
+		/* self->tx_sdu_busy is the state of the client.
+		 * Update state after notifying client to avoid
+		 * race condition with irttp_flow_indication().
+		 * If the queue empty itself after our test but before
+		 * we set the flag, we will fix ourselves below in
+		 * irttp_run_tx_queue().
+		 * Jean II */
+		self->tx_sdu_busy = TRUE;
+	}
+
+	/* Try to make some progress */
+	irttp_run_tx_queue(self);
+
+	return 0;
+
+err:
+	dev_kfree_skb(skb);
+	return ret;
+}
+EXPORT_SYMBOL(irttp_data_request);
+
+/*
+ * Function irttp_run_tx_queue (self)
+ *
+ *    Transmit packets queued for transmission (if possible)
+ *
+ */
+static void irttp_run_tx_queue(struct tsap_cb *self)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	int n;
+
+	IRDA_DEBUG(2, "%s() : send_credit = %d, queue_len = %d\n",
+		   __FUNCTION__,
+		   self->send_credit, skb_queue_len(&self->tx_queue));
+
+	/* Get exclusive access to the tx queue, otherwise don't touch it */
+	if (irda_lock(&self->tx_queue_lock) == FALSE)
+		return;
+
+	/* Try to send out frames as long as we have credits
+	 * and as long as LAP is not full. If LAP is full, it will
+	 * poll us through irttp_flow_indication() - Jean II */
+	while ((self->send_credit > 0) &&
+	       (!irlmp_lap_tx_queue_full(self->lsap)) &&
+	       (skb = skb_dequeue(&self->tx_queue)))
+	{
+		/*
+		 *  Since we can transmit and receive frames concurrently,
+		 *  the code below is a critical region and we must assure that
+		 *  nobody messes with the credits while we update them.
+		 */
+		spin_lock_irqsave(&self->lock, flags);
+
+		n = self->avail_credit;
+		self->avail_credit = 0;
+
+		/* Only room for 127 credits in frame */
+		if (n > 127) {
+			self->avail_credit = n-127;
+			n = 127;
+		}
+		self->remote_credit += n;
+		self->send_credit--;
+
+		spin_unlock_irqrestore(&self->lock, flags);
+
+		/*
+		 *  More bit must be set by the data_request() or fragment()
+		 *  functions
+		 */
+		skb->data[0] |= (n & 0x7f);
+
+		/* Detach from socket.
+		 * The current skb has a reference to the socket that sent
+		 * it (skb->sk). When we pass it to IrLMP, the skb will be
+		 * stored in in IrLAP (self->wx_list). When we are within
+		 * IrLAP, we lose the notion of socket, so we should not
+		 * have a reference to a socket. So, we drop it here.
+		 *
+		 * Why does it matter ?
+		 * When the skb is freed (kfree_skb), if it is associated
+		 * with a socket, it release buffer space on the socket
+		 * (through sock_wfree() and sock_def_write_space()).
+		 * If the socket no longer exist, we may crash. Hard.
+		 * When we close a socket, we make sure that associated packets
+		 * in IrTTP are freed. However, we have no way to cancel
+		 * the packet that we have passed to IrLAP. So, if a packet
+		 * remains in IrLAP (retry on the link or else) after we
+		 * close the socket, we are dead !
+		 * Jean II */
+		if (skb->sk != NULL) {
+			/* IrSOCK application, IrOBEX, ... */
+			skb_orphan(skb);
+		}
+			/* IrCOMM over IrTTP, IrLAN, ... */
+
+		/* Pass the skb to IrLMP - done */
+		irlmp_data_request(self->lsap, skb);
+		self->stats.tx_packets++;
+	}
+
+	/* Check if we can accept more frames from client.
+	 * We don't want to wait until the todo timer to do that, and we
+	 * can't use tasklets (grr...), so we are obliged to give control
+	 * to client. That's ok, this test will be true not too often
+	 * (max once per LAP window) and we are called from places
+	 * where we can spend a bit of time doing stuff. - Jean II */
+	if ((self->tx_sdu_busy) &&
+	    (skb_queue_len(&self->tx_queue) < TTP_TX_LOW_THRESHOLD) &&
+	    (!self->close_pend))
+	{
+		if (self->notify.flow_indication)
+			self->notify.flow_indication(self->notify.instance,
+						     self, FLOW_START);
+
+		/* self->tx_sdu_busy is the state of the client.
+		 * We don't really have a race here, but it's always safer
+		 * to update our state after the client - Jean II */
+		self->tx_sdu_busy = FALSE;
+	}
+
+	/* Reset lock */
+	self->tx_queue_lock = 0;
+}
+
+/*
+ * Function irttp_give_credit (self)
+ *
+ *    Send a dataless flowdata TTP-PDU and give available credit to peer
+ *    TSAP
+ */
+static inline void irttp_give_credit(struct tsap_cb *self)
+{
+	struct sk_buff *tx_skb = NULL;
+	unsigned long flags;
+	int n;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	IRDA_DEBUG(4, "%s() send=%d,avail=%d,remote=%d\n",
+		   __FUNCTION__,
+		   self->send_credit, self->avail_credit, self->remote_credit);
+
+	/* Give credit to peer */
+	tx_skb = dev_alloc_skb(64);
+	if (!tx_skb)
+		return;
+
+	/* Reserve space for LMP, and LAP header */
+	skb_reserve(tx_skb, self->max_header_size);
+
+	/*
+	 *  Since we can transmit and receive frames concurrently,
+	 *  the code below is a critical region and we must assure that
+	 *  nobody messes with the credits while we update them.
+	 */
+	spin_lock_irqsave(&self->lock, flags);
+
+	n = self->avail_credit;
+	self->avail_credit = 0;
+
+	/* Only space for 127 credits in frame */
+	if (n > 127) {
+		self->avail_credit = n - 127;
+		n = 127;
+	}
+	self->remote_credit += n;
+
+	spin_unlock_irqrestore(&self->lock, flags);
+
+	skb_put(tx_skb, 1);
+	tx_skb->data[0] = (__u8) (n & 0x7f);
+
+	irlmp_data_request(self->lsap, tx_skb);
+	self->stats.tx_packets++;
+}
+
+/*
+ * Function irttp_udata_indication (instance, sap, skb)
+ *
+ *    Received some unit-data (unreliable)
+ *
+ */
+static int irttp_udata_indication(void *instance, void *sap,
+				  struct sk_buff *skb)
+{
+	struct tsap_cb *self;
+	int err;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+	IRDA_ASSERT(skb != NULL, return -1;);
+
+	self->stats.rx_packets++;
+
+	/* Just pass data to layer above */
+	if (self->notify.udata_indication) {
+		err = self->notify.udata_indication(self->notify.instance,
+						    self,skb);
+		/* Same comment as in irttp_do_data_indication() */
+		if (!err) 
+			return 0;
+	}
+	/* Either no handler, or handler returns an error */
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+/*
+ * Function irttp_data_indication (instance, sap, skb)
+ *
+ *    Receive segment from IrLMP.
+ *
+ */
+static int irttp_data_indication(void *instance, void *sap,
+				 struct sk_buff *skb)
+{
+	struct tsap_cb *self;
+	unsigned long flags;
+	int n;
+
+	self = (struct tsap_cb *) instance;
+
+	n = skb->data[0] & 0x7f;     /* Extract the credits */
+
+	self->stats.rx_packets++;
+
+	/*  Deal with inbound credit
+	 *  Since we can transmit and receive frames concurrently,
+	 *  the code below is a critical region and we must assure that
+	 *  nobody messes with the credits while we update them.
+	 */
+	spin_lock_irqsave(&self->lock, flags);
+	self->send_credit += n;
+	if (skb->len > 1)
+		self->remote_credit--;
+	spin_unlock_irqrestore(&self->lock, flags);
+
+	/*
+	 *  Data or dataless packet? Dataless frames contains only the
+	 *  TTP_HEADER.
+	 */
+	if (skb->len > 1) {
+		/*
+		 *  We don't remove the TTP header, since we must preserve the
+		 *  more bit, so the defragment routing knows what to do
+		 */
+		skb_queue_tail(&self->rx_queue, skb);
+	} else {
+		/* Dataless flowdata TTP-PDU */
+		dev_kfree_skb(skb);
+	}
+
+
+	/* Push data to the higher layer.
+	 * We do it synchronously because running the todo timer for each
+	 * receive packet would be too much overhead and latency.
+	 * By passing control to the higher layer, we run the risk that
+	 * it may take time or grab a lock. Most often, the higher layer
+	 * will only put packet in a queue.
+	 * Anyway, packets are only dripping through the IrDA, so we can
+	 * have time before the next packet.
+	 * Further, we are run from NET_BH, so the worse that can happen is
+	 * us missing the optimal time to send back the PF bit in LAP.
+	 * Jean II */
+	irttp_run_rx_queue(self);
+
+	/* We now give credits to peer in irttp_run_rx_queue().
+	 * We need to send credit *NOW*, otherwise we are going
+	 * to miss the next Tx window. The todo timer may take
+	 * a while before it's run... - Jean II */
+
+	/*
+	 * If the peer device has given us some credits and we didn't have
+         * anyone from before, then we need to shedule the tx queue.
+	 * We need to do that because our Tx have stopped (so we may not
+	 * get any LAP flow indication) and the user may be stopped as
+	 * well. - Jean II
+	 */
+	if (self->send_credit == n) {
+		/* Restart pushing stuff to LAP */
+		irttp_run_tx_queue(self);
+		/* Note : we don't want to schedule the todo timer
+		 * because it has horrible latency. No tasklets
+		 * because the tasklet API is broken. - Jean II */
+	}
+
+	return 0;
+}
+
+/*
+ * Function irttp_status_indication (self, reason)
+ *
+ *    Status_indication, just pass to the higher layer...
+ *
+ */
+static void irttp_status_indication(void *instance,
+				    LINK_STATUS link, LOCK_STATUS lock)
+{
+	struct tsap_cb *self;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	/* Check if client has already closed the TSAP and gone away */
+	if (self->close_pend)
+		return;
+
+	/*
+	 *  Inform service user if he has requested it
+	 */
+	if (self->notify.status_indication != NULL)
+		self->notify.status_indication(self->notify.instance,
+					       link, lock);
+	else
+		IRDA_DEBUG(2, "%s(), no handler\n", __FUNCTION__);
+}
+
+/*
+ * Function irttp_flow_indication (self, reason)
+ *
+ *    Flow_indication : IrLAP tells us to send more data.
+ *
+ */
+static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow)
+{
+	struct tsap_cb *self;
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	IRDA_DEBUG(4, "%s(instance=%p)\n", __FUNCTION__, self);
+
+	/* We are "polled" directly from LAP, and the LAP want to fill
+	 * its Tx window. We want to do our best to send it data, so that
+	 * we maximise the window. On the other hand, we want to limit the
+	 * amount of work here so that LAP doesn't hang forever waiting
+	 * for packets. - Jean II */
+
+	/* Try to send some packets. Currently, LAP calls us every time
+	 * there is one free slot, so we will send only one packet.
+	 * This allow the scheduler to do its round robin - Jean II */
+	irttp_run_tx_queue(self);
+
+	/* Note regarding the interraction with higher layer.
+	 * irttp_run_tx_queue() may call the client when its queue
+	 * start to empty, via notify.flow_indication(). Initially.
+	 * I wanted this to happen in a tasklet, to avoid client
+	 * grabbing the CPU, but we can't use tasklets safely. And timer
+	 * is definitely too slow.
+	 * This will happen only once per LAP window, and usually at
+	 * the third packet (unless window is smaller). LAP is still
+	 * doing mtt and sending first packet so it's sort of OK
+	 * to do that. Jean II */
+
+	/* If we need to send disconnect. try to do it now */
+	if(self->disconnect_pend)
+		irttp_start_todo_timer(self, 0);
+}
+
+/*
+ * Function irttp_flow_request (self, command)
+ *
+ *    This function could be used by the upper layers to tell IrTTP to stop
+ *    delivering frames if the receive queues are starting to get full, or
+ *    to tell IrTTP to start delivering frames again.
+ */
+void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow)
+{
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	switch (flow) {
+	case FLOW_STOP:
+		IRDA_DEBUG(1, "%s(), flow stop\n", __FUNCTION__);
+		self->rx_sdu_busy = TRUE;
+		break;
+	case FLOW_START:
+		IRDA_DEBUG(1, "%s(), flow start\n", __FUNCTION__);
+		self->rx_sdu_busy = FALSE;
+
+		/* Client say he can accept more data, try to free our
+		 * queues ASAP - Jean II */
+		irttp_run_rx_queue(self);
+
+		break;
+	default:
+		IRDA_DEBUG(1, "%s(), Unknown flow command!\n", __FUNCTION__);
+	}
+}
+EXPORT_SYMBOL(irttp_flow_request);
+
+/*
+ * Function irttp_connect_request (self, dtsap_sel, daddr, qos)
+ *
+ *    Try to connect to remote destination TSAP selector
+ *
+ */
+int irttp_connect_request(struct tsap_cb *self, __u8 dtsap_sel,
+			  __u32 saddr, __u32 daddr,
+			  struct qos_info *qos, __u32 max_sdu_size,
+			  struct sk_buff *userdata)
+{
+	struct sk_buff *tx_skb;
+	__u8 *frame;
+	__u8 n;
+
+	IRDA_DEBUG(4, "%s(), max_sdu_size=%d\n", __FUNCTION__, max_sdu_size);
+
+	IRDA_ASSERT(self != NULL, return -EBADR;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -EBADR;);
+
+	if (self->connected) {
+		if(userdata)
+			dev_kfree_skb(userdata);
+		return -EISCONN;
+	}
+
+	/* Any userdata supplied? */
+	if (userdata == NULL) {
+		tx_skb = dev_alloc_skb(64);
+		if (!tx_skb)
+			return -ENOMEM;
+
+		/* Reserve space for MUX_CONTROL and LAP header */
+		skb_reserve(tx_skb, TTP_MAX_HEADER);
+	} else {
+		tx_skb = userdata;
+		/*
+		 *  Check that the client has reserved enough space for
+		 *  headers
+		 */
+		IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER,
+			{ dev_kfree_skb(userdata); return -1; } );
+	}
+
+	/* Initialize connection parameters */
+	self->connected = FALSE;
+	self->avail_credit = 0;
+	self->rx_max_sdu_size = max_sdu_size;
+	self->rx_sdu_size = 0;
+	self->rx_sdu_busy = FALSE;
+	self->dtsap_sel = dtsap_sel;
+
+	n = self->initial_credit;
+
+	self->remote_credit = 0;
+	self->send_credit = 0;
+
+	/*
+	 *  Give away max 127 credits for now
+	 */
+	if (n > 127) {
+		self->avail_credit=n-127;
+		n = 127;
+	}
+
+	self->remote_credit = n;
+
+	/* SAR enabled? */
+	if (max_sdu_size > 0) {
+		IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER),
+			{ dev_kfree_skb(tx_skb); return -1; } );
+
+		/* Insert SAR parameters */
+		frame = skb_push(tx_skb, TTP_HEADER+TTP_SAR_HEADER);
+
+		frame[0] = TTP_PARAMETERS | n;
+		frame[1] = 0x04; /* Length */
+		frame[2] = 0x01; /* MaxSduSize */
+		frame[3] = 0x02; /* Value length */
+
+		put_unaligned(cpu_to_be16((__u16) max_sdu_size),
+			      (__u16 *)(frame+4));
+	} else {
+		/* Insert plain TTP header */
+		frame = skb_push(tx_skb, TTP_HEADER);
+
+		/* Insert initial credit in frame */
+		frame[0] = n & 0x7f;
+	}
+
+	/* Connect with IrLMP. No QoS parameters for now */
+	return irlmp_connect_request(self->lsap, dtsap_sel, saddr, daddr, qos,
+				     tx_skb);
+}
+EXPORT_SYMBOL(irttp_connect_request);
+
+/*
+ * Function irttp_connect_confirm (handle, qos, skb)
+ *
+ *    Sevice user confirms TSAP connection with peer.
+ *
+ */
+static void irttp_connect_confirm(void *instance, void *sap,
+				  struct qos_info *qos, __u32 max_seg_size,
+				  __u8 max_header_size, struct sk_buff *skb)
+{
+	struct tsap_cb *self;
+	int parameters;
+	int ret;
+	__u8 plen;
+	__u8 n;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	self->max_seg_size = max_seg_size - TTP_HEADER;
+	self->max_header_size = max_header_size + TTP_HEADER;
+
+	/*
+	 *  Check if we have got some QoS parameters back! This should be the
+	 *  negotiated QoS for the link.
+	 */
+	if (qos) {
+		IRDA_DEBUG(4, "IrTTP, Negotiated BAUD_RATE: %02x\n",
+		       qos->baud_rate.bits);
+		IRDA_DEBUG(4, "IrTTP, Negotiated BAUD_RATE: %d bps.\n",
+		       qos->baud_rate.value);
+	}
+
+	n = skb->data[0] & 0x7f;
+
+	IRDA_DEBUG(4, "%s(), Initial send_credit=%d\n", __FUNCTION__, n);
+
+	self->send_credit = n;
+	self->tx_max_sdu_size = 0;
+	self->connected = TRUE;
+
+	parameters = skb->data[0] & 0x80;
+
+	IRDA_ASSERT(skb->len >= TTP_HEADER, return;);
+	skb_pull(skb, TTP_HEADER);
+
+	if (parameters) {
+		plen = skb->data[0];
+
+		ret = irda_param_extract_all(self, skb->data+1,
+					     IRDA_MIN(skb->len-1, plen),
+					     &param_info);
+
+		/* Any errors in the parameter list? */
+		if (ret < 0) {
+			IRDA_WARNING("%s: error extracting parameters\n",
+				     __FUNCTION__);
+			dev_kfree_skb(skb);
+
+			/* Do not accept this connection attempt */
+			return;
+		}
+		/* Remove parameters */
+		skb_pull(skb, IRDA_MIN(skb->len, plen+1));
+	}
+
+	IRDA_DEBUG(4, "%s() send=%d,avail=%d,remote=%d\n", __FUNCTION__,
+	      self->send_credit, self->avail_credit, self->remote_credit);
+
+	IRDA_DEBUG(2, "%s(), MaxSduSize=%d\n", __FUNCTION__,
+		   self->tx_max_sdu_size);
+
+	if (self->notify.connect_confirm) {
+		self->notify.connect_confirm(self->notify.instance, self, qos,
+					     self->tx_max_sdu_size,
+					     self->max_header_size, skb);
+	} else
+		dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_connect_indication (handle, skb)
+ *
+ *    Some other device is connecting to this TSAP
+ *
+ */
+void irttp_connect_indication(void *instance, void *sap, struct qos_info *qos,
+			      __u32 max_seg_size, __u8 max_header_size,
+			      struct sk_buff *skb)
+{
+	struct tsap_cb *self;
+	struct lsap_cb *lsap;
+	int parameters;
+	int ret;
+	__u8 plen;
+	__u8 n;
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+	IRDA_ASSERT(skb != NULL, return;);
+
+	lsap = (struct lsap_cb *) sap;
+
+	self->max_seg_size = max_seg_size - TTP_HEADER;
+	self->max_header_size = max_header_size+TTP_HEADER;
+
+	IRDA_DEBUG(4, "%s(), TSAP sel=%02x\n", __FUNCTION__, self->stsap_sel);
+
+	/* Need to update dtsap_sel if its equal to LSAP_ANY */
+	self->dtsap_sel = lsap->dlsap_sel;
+
+	n = skb->data[0] & 0x7f;
+
+	self->send_credit = n;
+	self->tx_max_sdu_size = 0;
+
+	parameters = skb->data[0] & 0x80;
+
+	IRDA_ASSERT(skb->len >= TTP_HEADER, return;);
+	skb_pull(skb, TTP_HEADER);
+
+	if (parameters) {
+		plen = skb->data[0];
+
+		ret = irda_param_extract_all(self, skb->data+1,
+					     IRDA_MIN(skb->len-1, plen),
+					     &param_info);
+
+		/* Any errors in the parameter list? */
+		if (ret < 0) {
+			IRDA_WARNING("%s: error extracting parameters\n",
+				     __FUNCTION__);
+			dev_kfree_skb(skb);
+
+			/* Do not accept this connection attempt */
+			return;
+		}
+
+		/* Remove parameters */
+		skb_pull(skb, IRDA_MIN(skb->len, plen+1));
+	}
+
+	if (self->notify.connect_indication) {
+		self->notify.connect_indication(self->notify.instance, self,
+						qos, self->tx_max_sdu_size,
+						self->max_header_size, skb);
+	} else
+		dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_connect_response (handle, userdata)
+ *
+ *    Service user is accepting the connection, just pass it down to
+ *    IrLMP!
+ *
+ */
+int irttp_connect_response(struct tsap_cb *self, __u32 max_sdu_size,
+			   struct sk_buff *userdata)
+{
+	struct sk_buff *tx_skb;
+	__u8 *frame;
+	int ret;
+	__u8 n;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+	IRDA_DEBUG(4, "%s(), Source TSAP selector=%02x\n", __FUNCTION__,
+		   self->stsap_sel);
+
+	/* Any userdata supplied? */
+	if (userdata == NULL) {
+		tx_skb = dev_alloc_skb(64);
+		if (!tx_skb)
+			return -ENOMEM;
+
+		/* Reserve space for MUX_CONTROL and LAP header */
+		skb_reserve(tx_skb, TTP_MAX_HEADER);
+	} else {
+		tx_skb = userdata;
+		/*
+		 *  Check that the client has reserved enough space for
+		 *  headers
+		 */
+		IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER,
+			{ dev_kfree_skb(userdata); return -1; } );
+	}
+
+	self->avail_credit = 0;
+	self->remote_credit = 0;
+	self->rx_max_sdu_size = max_sdu_size;
+	self->rx_sdu_size = 0;
+	self->rx_sdu_busy = FALSE;
+
+	n = self->initial_credit;
+
+	/* Frame has only space for max 127 credits (7 bits) */
+	if (n > 127) {
+		self->avail_credit = n - 127;
+		n = 127;
+	}
+
+	self->remote_credit = n;
+	self->connected = TRUE;
+
+	/* SAR enabled? */
+	if (max_sdu_size > 0) {
+		IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER),
+			{ dev_kfree_skb(tx_skb); return -1; } );
+
+		/* Insert TTP header with SAR parameters */
+		frame = skb_push(tx_skb, TTP_HEADER+TTP_SAR_HEADER);
+
+		frame[0] = TTP_PARAMETERS | n;
+		frame[1] = 0x04; /* Length */
+
+		/* irda_param_insert(self, IRTTP_MAX_SDU_SIZE, frame+1,  */
+/*				  TTP_SAR_HEADER, &param_info) */
+
+		frame[2] = 0x01; /* MaxSduSize */
+		frame[3] = 0x02; /* Value length */
+
+		put_unaligned(cpu_to_be16((__u16) max_sdu_size),
+			      (__u16 *)(frame+4));
+	} else {
+		/* Insert TTP header */
+		frame = skb_push(tx_skb, TTP_HEADER);
+
+		frame[0] = n & 0x7f;
+	}
+
+	ret = irlmp_connect_response(self->lsap, tx_skb);
+
+	return ret;
+}
+EXPORT_SYMBOL(irttp_connect_response);
+
+/*
+ * Function irttp_dup (self, instance)
+ *
+ *    Duplicate TSAP, can be used by servers to confirm a connection on a
+ *    new TSAP so it can keep listening on the old one.
+ */
+struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance)
+{
+	struct tsap_cb *new;
+	unsigned long flags;
+
+	IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+	/* Protect our access to the old tsap instance */
+	spin_lock_irqsave(&irttp->tsaps->hb_spinlock, flags);
+
+	/* Find the old instance */
+	if (!hashbin_find(irttp->tsaps, (long) orig, NULL)) {
+		IRDA_DEBUG(0, "%s(), unable to find TSAP\n", __FUNCTION__);
+		spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
+		return NULL;
+	}
+
+	/* Allocate a new instance */
+	new = kmalloc(sizeof(struct tsap_cb), GFP_ATOMIC);
+	if (!new) {
+		IRDA_DEBUG(0, "%s(), unable to kmalloc\n", __FUNCTION__);
+		spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
+		return NULL;
+	}
+	/* Dup */
+	memcpy(new, orig, sizeof(struct tsap_cb));
+
+	/* We don't need the old instance any more */
+	spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
+
+	/* Try to dup the LSAP (may fail if we were too slow) */
+	new->lsap = irlmp_dup(orig->lsap, new);
+	if (!new->lsap) {
+		IRDA_DEBUG(0, "%s(), dup failed!\n", __FUNCTION__);
+		kfree(new);
+		return NULL;
+	}
+
+	/* Not everything should be copied */
+	new->notify.instance = instance;
+	init_timer(&new->todo_timer);
+
+	skb_queue_head_init(&new->rx_queue);
+	skb_queue_head_init(&new->tx_queue);
+	skb_queue_head_init(&new->rx_fragments);
+
+	/* This is locked */
+	hashbin_insert(irttp->tsaps, (irda_queue_t *) new, (long) new, NULL);
+
+	return new;
+}
+EXPORT_SYMBOL(irttp_dup);
+
+/*
+ * Function irttp_disconnect_request (self)
+ *
+ *    Close this connection please! If priority is high, the queued data
+ *    segments, if any, will be deallocated first
+ *
+ */
+int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *userdata,
+			     int priority)
+{
+	int ret;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
+
+	/* Already disconnected? */
+	if (!self->connected) {
+		IRDA_DEBUG(4, "%s(), already disconnected!\n", __FUNCTION__);
+		if (userdata)
+			dev_kfree_skb(userdata);
+		return -1;
+	}
+
+	/* Disconnect already pending ?
+	 * We need to use an atomic operation to prevent reentry. This
+	 * function may be called from various context, like user, timer
+	 * for following a disconnect_indication() (i.e. net_bh).
+	 * Jean II */
+	if(test_and_set_bit(0, &self->disconnect_pend)) {
+		IRDA_DEBUG(0, "%s(), disconnect already pending\n",
+			   __FUNCTION__);
+		if (userdata)
+			dev_kfree_skb(userdata);
+
+		/* Try to make some progress */
+		irttp_run_tx_queue(self);
+		return -1;
+	}
+
+	/*
+	 *  Check if there is still data segments in the transmit queue
+	 */
+	if (skb_queue_len(&self->tx_queue) > 0) {
+		if (priority == P_HIGH) {
+			/*
+			 *  No need to send the queued data, if we are
+			 *  disconnecting right now since the data will
+			 *  not have any usable connection to be sent on
+			 */
+			IRDA_DEBUG(1, "%s(): High priority!!()\n", __FUNCTION__);
+			irttp_flush_queues(self);
+		} else if (priority == P_NORMAL) {
+			/*
+			 *  Must delay disconnect until after all data segments
+			 *  have been sent and the tx_queue is empty
+			 */
+			/* We'll reuse this one later for the disconnect */
+			self->disconnect_skb = userdata;  /* May be NULL */
+
+			irttp_run_tx_queue(self);
+
+			irttp_start_todo_timer(self, HZ/10);
+			return -1;
+		}
+	}
+	/* Note : we don't need to check if self->rx_queue is full and the
+	 * state of self->rx_sdu_busy because the disconnect response will
+	 * be sent at the LMP level (so even if the peer has its Tx queue
+	 * full of data). - Jean II */
+
+	IRDA_DEBUG(1, "%s(), Disconnecting ...\n", __FUNCTION__);
+	self->connected = FALSE;
+
+	if (!userdata) {
+		struct sk_buff *tx_skb;
+		tx_skb = dev_alloc_skb(64);
+		if (!tx_skb)
+			return -ENOMEM;
+
+		/*
+		 *  Reserve space for MUX and LAP header
+		 */
+		skb_reserve(tx_skb, TTP_MAX_HEADER);
+
+		userdata = tx_skb;
+	}
+	ret = irlmp_disconnect_request(self->lsap, userdata);
+
+	/* The disconnect is no longer pending */
+	clear_bit(0, &self->disconnect_pend);	/* FALSE */
+
+	return ret;
+}
+EXPORT_SYMBOL(irttp_disconnect_request);
+
+/*
+ * Function irttp_disconnect_indication (self, reason)
+ *
+ *    Disconnect indication, TSAP disconnected by peer?
+ *
+ */
+void irttp_disconnect_indication(void *instance, void *sap, LM_REASON reason,
+				 struct sk_buff *skb)
+{
+	struct tsap_cb *self;
+
+	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
+
+	self = (struct tsap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;);
+
+	/* Prevent higher layer to send more data */
+	self->connected = FALSE;
+
+	/* Check if client has already tried to close the TSAP */
+	if (self->close_pend) {
+		/* In this case, the higher layer is probably gone. Don't
+		 * bother it and clean up the remains - Jean II */
+		if (skb)
+			dev_kfree_skb(skb);
+		irttp_close_tsap(self);
+		return;
+	}
+
+	/* If we are here, we assume that is the higher layer is still
+	 * waiting for the disconnect notification and able to process it,
+	 * even if he tried to disconnect. Otherwise, it would have already
+	 * attempted to close the tsap and self->close_pend would be TRUE.
+	 * Jean II */
+
+	/* No need to notify the client if has already tried to disconnect */
+	if(self->notify.disconnect_indication)
+		self->notify.disconnect_indication(self->notify.instance, self,
+						   reason, skb);
+	else
+		if (skb)
+			dev_kfree_skb(skb);
+}
+
+/*
+ * Function irttp_do_data_indication (self, skb)
+ *
+ *    Try to deliver reassembled skb to layer above, and requeue it if that
+ *    for some reason should fail. We mark rx sdu as busy to apply back
+ *    pressure is necessary.
+ */
+static void irttp_do_data_indication(struct tsap_cb *self, struct sk_buff *skb)
+{
+	int err;
+
+	/* Check if client has already closed the TSAP and gone away */
+	if (self->close_pend) {
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	err = self->notify.data_indication(self->notify.instance, self, skb);
+
+	/* Usually the layer above will notify that it's input queue is
+	 * starting to get filled by using the flow request, but this may
+	 * be difficult, so it can instead just refuse to eat it and just
+	 * give an error back
+	 */
+	if (err) {
+		IRDA_DEBUG(0, "%s() requeueing skb!\n", __FUNCTION__);
+
+		/* Make sure we take a break */
+		self->rx_sdu_busy = TRUE;
+
+		/* Need to push the header in again */
+		skb_push(skb, TTP_HEADER);
+		skb->data[0] = 0x00; /* Make sure MORE bit is cleared */
+
+		/* Put skb back on queue */
+		skb_queue_head(&self->rx_queue, skb);
+	}
+}
+
+/*
+ * Function irttp_run_rx_queue (self)
+ *
+ *     Check if we have any frames to be transmitted, or if we have any
+ *     available credit to give away.
+ */
+void irttp_run_rx_queue(struct tsap_cb *self)
+{
+	struct sk_buff *skb;
+	int more = 0;
+
+	IRDA_DEBUG(2, "%s() send=%d,avail=%d,remote=%d\n", __FUNCTION__,
+		   self->send_credit, self->avail_credit, self->remote_credit);
+
+	/* Get exclusive access to the rx queue, otherwise don't touch it */
+	if (irda_lock(&self->rx_queue_lock) == FALSE)
+		return;
+
+	/*
+	 *  Reassemble all frames in receive queue and deliver them
+	 */
+	while (!self->rx_sdu_busy && (skb = skb_dequeue(&self->rx_queue))) {
+		/* This bit will tell us if it's the last fragment or not */
+		more = skb->data[0] & 0x80;
+
+		/* Remove TTP header */
+		skb_pull(skb, TTP_HEADER);
+
+		/* Add the length of the remaining data */
+		self->rx_sdu_size += skb->len;
+
+		/*
+		 * If SAR is disabled, or user has requested no reassembly
+		 * of received fragments then we just deliver them
+		 * immediately. This can be requested by clients that
+		 * implements byte streams without any message boundaries
+		 */
+		if (self->rx_max_sdu_size == TTP_SAR_DISABLE) {
+			irttp_do_data_indication(self, skb);
+			self->rx_sdu_size = 0;
+
+			continue;
+		}
+
+		/* Check if this is a fragment, and not the last fragment */
+		if (more) {
+			/*
+			 *  Queue the fragment if we still are within the
+			 *  limits of the maximum size of the rx_sdu
+			 */
+			if (self->rx_sdu_size <= self->rx_max_sdu_size) {
+				IRDA_DEBUG(4, "%s(), queueing frag\n",
+					   __FUNCTION__);
+				skb_queue_tail(&self->rx_fragments, skb);
+			} else {
+				/* Free the part of the SDU that is too big */
+				dev_kfree_skb(skb);
+			}
+			continue;
+		}
+		/*
+		 *  This is the last fragment, so time to reassemble!
+		 */
+		if ((self->rx_sdu_size <= self->rx_max_sdu_size) ||
+		    (self->rx_max_sdu_size == TTP_SAR_UNBOUND))
+		{
+			/*
+			 * A little optimizing. Only queue the fragment if
+			 * there are other fragments. Since if this is the
+			 * last and only fragment, there is no need to
+			 * reassemble :-)
+			 */
+			if (!skb_queue_empty(&self->rx_fragments)) {
+				skb_queue_tail(&self->rx_fragments,
+					       skb);
+
+				skb = irttp_reassemble_skb(self);
+			}
+
+			/* Now we can deliver the reassembled skb */
+			irttp_do_data_indication(self, skb);
+		} else {
+			IRDA_DEBUG(1, "%s(), Truncated frame\n", __FUNCTION__);
+
+			/* Free the part of the SDU that is too big */
+			dev_kfree_skb(skb);
+
+			/* Deliver only the valid but truncated part of SDU */
+			skb = irttp_reassemble_skb(self);
+
+			irttp_do_data_indication(self, skb);
+		}
+		self->rx_sdu_size = 0;
+	}
+
+	/*
+	 * It's not trivial to keep track of how many credits are available
+	 * by incrementing at each packet, because delivery may fail
+	 * (irttp_do_data_indication() may requeue the frame) and because
+	 * we need to take care of fragmentation.
+	 * We want the other side to send up to initial_credit packets.
+	 * We have some frames in our queues, and we have already allowed it
+	 * to send remote_credit.
+	 * No need to spinlock, write is atomic and self correcting...
+	 * Jean II
+	 */
+	self->avail_credit = (self->initial_credit -
+			      (self->remote_credit +
+			       skb_queue_len(&self->rx_queue) +
+			       skb_queue_len(&self->rx_fragments)));
+
+	/* Do we have too much credits to send to peer ? */
+	if ((self->remote_credit <= TTP_RX_MIN_CREDIT) &&
+	    (self->avail_credit > 0)) {
+		/* Send explicit credit frame */
+		irttp_give_credit(self);
+		/* Note : do *NOT* check if tx_queue is non-empty, that
+		 * will produce deadlocks. I repeat : send a credit frame
+		 * even if we have something to send in our Tx queue.
+		 * If we have credits, it means that our Tx queue is blocked.
+		 *
+		 * Let's suppose the peer can't keep up with our Tx. He will
+		 * flow control us by not sending us any credits, and we
+		 * will stop Tx and start accumulating credits here.
+		 * Up to the point where the peer will stop its Tx queue,
+		 * for lack of credits.
+		 * Let's assume the peer application is single threaded.
+		 * It will block on Tx and never consume any Rx buffer.
+		 * Deadlock. Guaranteed. - Jean II
+		 */
+	}
+
+	/* Reset lock */
+	self->rx_queue_lock = 0;
+}
+
+#ifdef CONFIG_PROC_FS
+struct irttp_iter_state {
+	int id;
+};
+
+static void *irttp_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct irttp_iter_state *iter = seq->private;
+	struct tsap_cb *self;
+
+	/* Protect our access to the tsap list */
+	spin_lock_irq(&irttp->tsaps->hb_spinlock);
+	iter->id = 0;
+
+	for (self = (struct tsap_cb *) hashbin_get_first(irttp->tsaps); 
+	     self != NULL;
+	     self = (struct tsap_cb *) hashbin_get_next(irttp->tsaps)) {
+		if (iter->id == *pos)
+			break;
+		++iter->id;
+	}
+		
+	return self;
+}
+
+static void *irttp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct irttp_iter_state *iter = seq->private;
+
+	++*pos;
+	++iter->id;
+	return (void *) hashbin_get_next(irttp->tsaps);
+}
+
+static void irttp_seq_stop(struct seq_file *seq, void *v)
+{
+	spin_unlock_irq(&irttp->tsaps->hb_spinlock);
+}
+
+static int irttp_seq_show(struct seq_file *seq, void *v)
+{
+	const struct irttp_iter_state *iter = seq->private;
+	const struct tsap_cb *self = v;
+
+	seq_printf(seq, "TSAP %d, ", iter->id);
+	seq_printf(seq, "stsap_sel: %02x, ",
+		   self->stsap_sel);
+	seq_printf(seq, "dtsap_sel: %02x\n",
+		   self->dtsap_sel);
+	seq_printf(seq, "  connected: %s, ",
+		   self->connected? "TRUE":"FALSE");
+	seq_printf(seq, "avail credit: %d, ",
+		   self->avail_credit);
+	seq_printf(seq, "remote credit: %d, ",
+		   self->remote_credit);
+	seq_printf(seq, "send credit: %d\n",
+		   self->send_credit);
+	seq_printf(seq, "  tx packets: %ld, ",
+		   self->stats.tx_packets);
+	seq_printf(seq, "rx packets: %ld, ",
+		   self->stats.rx_packets);
+	seq_printf(seq, "tx_queue len: %d ",
+		   skb_queue_len(&self->tx_queue));
+	seq_printf(seq, "rx_queue len: %d\n",
+		   skb_queue_len(&self->rx_queue));
+	seq_printf(seq, "  tx_sdu_busy: %s, ",
+		   self->tx_sdu_busy? "TRUE":"FALSE");
+	seq_printf(seq, "rx_sdu_busy: %s\n",
+		   self->rx_sdu_busy? "TRUE":"FALSE");
+	seq_printf(seq, "  max_seg_size: %d, ",
+		   self->max_seg_size);
+	seq_printf(seq, "tx_max_sdu_size: %d, ",
+		   self->tx_max_sdu_size);
+	seq_printf(seq, "rx_max_sdu_size: %d\n",
+		   self->rx_max_sdu_size);
+
+	seq_printf(seq, "  Used by (%s)\n\n",
+		   self->notify.name);
+	return 0;
+}
+
+static struct seq_operations irttp_seq_ops = {
+	.start  = irttp_seq_start,
+	.next   = irttp_seq_next,
+	.stop   = irttp_seq_stop,
+	.show   = irttp_seq_show,
+};
+
+static int irttp_seq_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *seq;
+	int rc = -ENOMEM;
+	struct irttp_iter_state *s;
+       
+	IRDA_ASSERT(irttp != NULL, return -EINVAL;);
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (!s)
+		goto out;
+
+	rc = seq_open(file, &irttp_seq_ops);
+	if (rc)
+		goto out_kfree;
+
+	seq	     = file->private_data;
+	seq->private = s;
+	memset(s, 0, sizeof(*s));
+out:
+	return rc;
+out_kfree:
+	kfree(s);
+	goto out;
+}
+
+struct file_operations irttp_seq_fops = {
+	.owner		= THIS_MODULE,
+	.open           = irttp_seq_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release	= seq_release_private,
+};
+
+#endif /* PROC_FS */
diff --git a/net/irda/parameters.c b/net/irda/parameters.c
new file mode 100644
index 00000000000..1324942f976
--- /dev/null
+++ b/net/irda/parameters.c
@@ -0,0 +1,589 @@
+/*********************************************************************
+ *
+ * Filename:      parameters.c
+ * Version:       1.0
+ * Description:   A more general way to handle (pi,pl,pv) parameters
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Jun  7 10:25:11 1999
+ * Modified at:   Sun Jan 30 14:08:39 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ *
+ *     Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved.
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program; if not, write to the Free Software
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *     MA 02111-1307 USA
+ *
+ ********************************************************************/
+
+#include <linux/types.h>
+#include <linux/module.h>
+
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+
+static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi,
+				PV_TYPE type, PI_HANDLER func);
+static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi,
+			       PV_TYPE type, PI_HANDLER func);
+static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi,
+			       PV_TYPE type, PI_HANDLER func);
+static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi,
+				 PV_TYPE type, PI_HANDLER func);
+
+static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi,
+			       PV_TYPE type, PI_HANDLER func);
+static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi,
+				PV_TYPE type, PI_HANDLER func);
+
+static int irda_param_unpack(__u8 *buf, char *fmt, ...);
+
+/* Parameter value call table. Must match PV_TYPE */
+static PV_HANDLER pv_extract_table[] = {
+	irda_extract_integer, /* Handler for any length integers */
+	irda_extract_integer, /* Handler for 8  bits integers */
+	irda_extract_integer, /* Handler for 16 bits integers */
+	irda_extract_string,  /* Handler for strings */
+	irda_extract_integer, /* Handler for 32 bits integers */
+	irda_extract_octseq,  /* Handler for octet sequences */
+	irda_extract_no_value /* Handler for no value parameters */
+};
+
+static PV_HANDLER pv_insert_table[] = {
+	irda_insert_integer, /* Handler for any length integers */
+	irda_insert_integer, /* Handler for 8  bits integers */
+	irda_insert_integer, /* Handler for 16 bits integers */
+	NULL,                /* Handler for strings */
+	irda_insert_integer, /* Handler for 32 bits integers */
+	NULL,                /* Handler for octet sequences */
+	irda_insert_no_value /* Handler for no value parameters */
+};
+
+/*
+ * Function irda_insert_no_value (self, buf, len, pi, type, func)
+ */
+static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi,
+				PV_TYPE type, PI_HANDLER func)
+{
+	irda_param_t p;
+	int ret;
+
+	p.pi = pi;
+	p.pl = 0;
+
+	/* Call handler for this parameter */
+	ret = (*func)(self, &p, PV_GET);
+
+	/* Extract values anyway, since handler may need them */
+	irda_param_pack(buf, "bb", p.pi, p.pl);
+
+	if (ret < 0)
+		return ret;
+
+	return 2; /* Inserted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract_no_value (self, buf, len, type, func)
+ *
+ *    Extracts a parameter without a pv field (pl=0)
+ *
+ */
+static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi,
+				 PV_TYPE type, PI_HANDLER func)
+{
+	irda_param_t p;
+	int ret;
+
+	/* Extract values anyway, since handler may need them */
+	irda_param_unpack(buf, "bb", &p.pi, &p.pl);
+
+	/* Call handler for this parameter */
+	ret = (*func)(self, &p, PV_PUT);
+
+	if (ret < 0)
+		return ret;
+
+	return 2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_insert_integer (self, buf, len, pi, type, func)
+ */
+static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi,
+			       PV_TYPE type, PI_HANDLER func)
+{
+	irda_param_t p;
+	int n = 0;
+	int err;
+
+	p.pi = pi;             /* In case handler needs to know */
+	p.pl = type & PV_MASK; /* The integer type codes the lenght as well */
+	p.pv.i = 0;            /* Clear value */
+
+	/* Call handler for this parameter */
+	err = (*func)(self, &p, PV_GET);
+	if (err < 0)
+		return err;
+
+	/*
+	 * If parameter lenght is still 0, then (1) this is an any length
+	 * integer, and (2) the handler function does not care which length
+	 * we choose to use, so we pick the one the gives the fewest bytes.
+	 */
+	if (p.pl == 0) {
+		if (p.pv.i < 0xff) {
+			IRDA_DEBUG(2, "%s(), using 1 byte\n", __FUNCTION__);
+			p.pl = 1;
+		} else if (p.pv.i < 0xffff) {
+			IRDA_DEBUG(2, "%s(), using 2 bytes\n", __FUNCTION__);
+			p.pl = 2;
+		} else {
+			IRDA_DEBUG(2, "%s(), using 4 bytes\n", __FUNCTION__);
+			p.pl = 4; /* Default length */
+		}
+	}
+	/* Check if buffer is long enough for insertion */
+	if (len < (2+p.pl)) {
+		IRDA_WARNING("%s: buffer to short for insertion!\n",
+			     __FUNCTION__);
+		return -1;
+	}
+	IRDA_DEBUG(2, "%s(), pi=%#x, pl=%d, pi=%d\n", __FUNCTION__,
+		   p.pi, p.pl, p.pv.i);
+	switch (p.pl) {
+	case 1:
+		n += irda_param_pack(buf, "bbb", p.pi, p.pl, (__u8) p.pv.i);
+		break;
+	case 2:
+		if (type & PV_BIG_ENDIAN)
+			p.pv.i = cpu_to_be16((__u16) p.pv.i);
+		else
+			p.pv.i = cpu_to_le16((__u16) p.pv.i);
+		n += irda_param_pack(buf, "bbs", p.pi, p.pl, (__u16) p.pv.i);
+		break;
+	case 4:
+		if (type & PV_BIG_ENDIAN)
+			cpu_to_be32s(&p.pv.i);
+		else
+			cpu_to_le32s(&p.pv.i);
+		n += irda_param_pack(buf, "bbi", p.pi, p.pl, p.pv.i);
+
+		break;
+	default:
+		IRDA_WARNING("%s: length %d not supported\n",
+			     __FUNCTION__, p.pl);
+		/* Skip parameter */
+		return -1;
+	}
+
+	return p.pl+2; /* Inserted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract integer (self, buf, len, pi, type, func)
+ *
+ *    Extract a possibly variable length integer from buffer, and call
+ *    handler for processing of the parameter
+ */
+static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi,
+				PV_TYPE type, PI_HANDLER func)
+{
+	irda_param_t p;
+	int n = 0;
+	int extract_len;	/* Real lenght we extract */
+	int err;
+
+	p.pi = pi;     /* In case handler needs to know */
+	p.pl = buf[1]; /* Extract lenght of value */
+	p.pv.i = 0;    /* Clear value */
+	extract_len = p.pl;	/* Default : extract all */
+
+	/* Check if buffer is long enough for parsing */
+	if (len < (2+p.pl)) {
+		IRDA_WARNING("%s: buffer to short for parsing! "
+			     "Need %d bytes, but len is only %d\n",
+			     __FUNCTION__, p.pl, len);
+		return -1;
+	}
+
+	/*
+	 * Check that the integer length is what we expect it to be. If the
+	 * handler want a 16 bits integer then a 32 bits is not good enough
+	 * PV_INTEGER means that the handler is flexible.
+	 */
+	if (((type & PV_MASK) != PV_INTEGER) && ((type & PV_MASK) != p.pl)) {
+		IRDA_ERROR("%s: invalid parameter length! "
+			   "Expected %d bytes, but value had %d bytes!\n",
+			   __FUNCTION__, type & PV_MASK, p.pl);
+
+		/* Most parameters are bit/byte fields or little endian,
+		 * so it's ok to only extract a subset of it (the subset
+		 * that the handler expect). This is necessary, as some
+		 * broken implementations seems to add extra undefined bits.
+		 * If the parameter is shorter than we expect or is big
+		 * endian, we can't play those tricks. Jean II */
+		if((p.pl < (type & PV_MASK)) || (type & PV_BIG_ENDIAN)) {
+			/* Skip parameter */
+			return p.pl+2;
+		} else {
+			/* Extract subset of it, fallthrough */
+			extract_len = type & PV_MASK;
+		}
+	}
+
+
+	switch (extract_len) {
+	case 1:
+		n += irda_param_unpack(buf+2, "b", &p.pv.i);
+		break;
+	case 2:
+		n += irda_param_unpack(buf+2, "s", &p.pv.i);
+		if (type & PV_BIG_ENDIAN)
+			p.pv.i = be16_to_cpu((__u16) p.pv.i);
+		else
+			p.pv.i = le16_to_cpu((__u16) p.pv.i);
+		break;
+	case 4:
+		n += irda_param_unpack(buf+2, "i", &p.pv.i);
+		if (type & PV_BIG_ENDIAN)
+			be32_to_cpus(&p.pv.i);
+		else
+			le32_to_cpus(&p.pv.i);
+		break;
+	default:
+		IRDA_WARNING("%s: length %d not supported\n",
+			     __FUNCTION__, p.pl);
+
+		/* Skip parameter */
+		return p.pl+2;
+	}
+
+	IRDA_DEBUG(2, "%s(), pi=%#x, pl=%d, pi=%d\n", __FUNCTION__,
+		   p.pi, p.pl, p.pv.i);
+	/* Call handler for this parameter */
+	err = (*func)(self, &p, PV_PUT);
+	if (err < 0)
+		return err;
+
+	return p.pl+2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract_string (self, buf, len, type, func)
+ */
+static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi,
+			       PV_TYPE type, PI_HANDLER func)
+{
+	char str[33];
+	irda_param_t p;
+	int err;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	p.pi = pi;     /* In case handler needs to know */
+	p.pl = buf[1]; /* Extract lenght of value */
+
+	IRDA_DEBUG(2, "%s(), pi=%#x, pl=%d\n", __FUNCTION__,
+		   p.pi, p.pl);
+
+	/* Check if buffer is long enough for parsing */
+	if (len < (2+p.pl)) {
+		IRDA_WARNING("%s: buffer to short for parsing! "
+			     "Need %d bytes, but len is only %d\n",
+			     __FUNCTION__, p.pl, len);
+		return -1;
+	}
+
+	/* Should be safe to copy string like this since we have already
+	 * checked that the buffer is long enough */
+	strncpy(str, buf+2, p.pl);
+
+	IRDA_DEBUG(2, "%s(), str=0x%02x 0x%02x\n", __FUNCTION__,
+		   (__u8) str[0], (__u8) str[1]);
+
+	/* Null terminate string */
+	str[p.pl+1] = '\0';
+
+	p.pv.c = str; /* Handler will need to take a copy */
+
+	/* Call handler for this parameter */
+	err = (*func)(self, &p, PV_PUT);
+	if (err < 0)
+		return err;
+
+	return p.pl+2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_extract_octseq (self, buf, len, type, func)
+ */
+static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi,
+			       PV_TYPE type, PI_HANDLER func)
+{
+	irda_param_t p;
+
+	p.pi = pi;     /* In case handler needs to know */
+	p.pl = buf[1]; /* Extract lenght of value */
+
+	/* Check if buffer is long enough for parsing */
+	if (len < (2+p.pl)) {
+		IRDA_WARNING("%s: buffer to short for parsing! "
+			     "Need %d bytes, but len is only %d\n",
+			     __FUNCTION__, p.pl, len);
+		return -1;
+	}
+
+	IRDA_DEBUG(0, "%s(), not impl\n", __FUNCTION__);
+
+	return p.pl+2; /* Extracted pl+2 bytes */
+}
+
+/*
+ * Function irda_param_pack (skb, fmt, ...)
+ *
+ *    Format:
+ *        'i' = 32 bits integer
+ *        's' = string
+ *
+ */
+int irda_param_pack(__u8 *buf, char *fmt, ...)
+{
+	irda_pv_t arg;
+	va_list args;
+	char *p;
+	int n = 0;
+
+	va_start(args, fmt);
+
+	for (p = fmt; *p != '\0'; p++) {
+		switch (*p) {
+		case 'b':  /* 8 bits unsigned byte */
+			buf[n++] = (__u8)va_arg(args, int);
+			break;
+		case 's':  /* 16 bits unsigned short */
+			arg.i = (__u16)va_arg(args, int);
+			put_unaligned((__u16)arg.i, (__u16 *)(buf+n)); n+=2;
+			break;
+		case 'i':  /* 32 bits unsigned integer */
+			arg.i = va_arg(args, __u32);
+			put_unaligned(arg.i, (__u32 *)(buf+n)); n+=4;
+			break;
+#if 0
+		case 'c': /* \0 terminated string */
+			arg.c = va_arg(args, char *);
+			strcpy(buf+n, arg.c);
+			n += strlen(arg.c) + 1;
+			break;
+#endif
+		default:
+			va_end(args);
+			return -1;
+		}
+	}
+	va_end(args);
+
+	return 0;
+}
+EXPORT_SYMBOL(irda_param_pack);
+
+/*
+ * Function irda_param_unpack (skb, fmt, ...)
+ */
+static int irda_param_unpack(__u8 *buf, char *fmt, ...)
+{
+	irda_pv_t arg;
+	va_list args;
+	char *p;
+	int n = 0;
+
+	va_start(args, fmt);
+
+	for (p = fmt; *p != '\0'; p++) {
+		switch (*p) {
+		case 'b':  /* 8 bits byte */
+			arg.ip = va_arg(args, __u32 *);
+			*arg.ip = buf[n++];
+			break;
+		case 's':  /* 16 bits short */
+			arg.ip = va_arg(args, __u32 *);
+			*arg.ip = get_unaligned((__u16 *)(buf+n)); n+=2;
+			break;
+		case 'i':  /* 32 bits unsigned integer */
+			arg.ip = va_arg(args, __u32 *);
+			*arg.ip = get_unaligned((__u32 *)(buf+n)); n+=4;
+			break;
+#if 0
+		case 'c':   /* \0 terminated string */
+			arg.c = va_arg(args, char *);
+			strcpy(arg.c, buf+n);
+			n += strlen(arg.c) + 1;
+			break;
+#endif
+		default:
+			va_end(args);
+			return -1;
+		}
+
+	}
+	va_end(args);
+
+	return 0;
+}
+
+/*
+ * Function irda_param_insert (self, pi, buf, len, info)
+ *
+ *    Insert the specified parameter (pi) into buffer. Returns number of
+ *    bytes inserted
+ */
+int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len,
+		      pi_param_info_t *info)
+{
+	pi_minor_info_t *pi_minor_info;
+	__u8 pi_minor;
+	__u8 pi_major;
+	int type;
+	int ret = -1;
+	int n = 0;
+
+	IRDA_ASSERT(buf != NULL, return ret;);
+	IRDA_ASSERT(info != 0, return ret;);
+
+	pi_minor = pi & info->pi_mask;
+	pi_major = pi >> info->pi_major_offset;
+
+	/* Check if the identifier value (pi) is valid */
+	if ((pi_major > info->len-1) ||
+	    (pi_minor > info->tables[pi_major].len-1))
+	{
+		IRDA_DEBUG(0, "%s(), no handler for parameter=0x%02x\n",
+			   __FUNCTION__, pi);
+
+		/* Skip this parameter */
+		return -1;
+	}
+
+	/* Lookup the info on how to parse this parameter */
+	pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor];
+
+	/* Find expected data type for this parameter identifier (pi)*/
+	type = pi_minor_info->type;
+
+	/*  Check if handler has been implemented */
+	if (!pi_minor_info->func) {
+		IRDA_MESSAGE("%s: no handler for pi=%#x\n", __FUNCTION__, pi);
+		/* Skip this parameter */
+		return -1;
+	}
+
+	/* Insert parameter value */
+	ret = (*pv_insert_table[type & PV_MASK])(self, buf+n, len, pi, type,
+						 pi_minor_info->func);
+	return ret;
+}
+EXPORT_SYMBOL(irda_param_insert);
+
+/*
+ * Function irda_param_extract (self, buf, len, info)
+ *
+ *    Parse all parameters. If len is correct, then everything should be
+ *    safe. Returns the number of bytes that was parsed
+ *
+ */
+static int irda_param_extract(void *self, __u8 *buf, int len,
+			      pi_param_info_t *info)
+{
+	pi_minor_info_t *pi_minor_info;
+	__u8 pi_minor;
+	__u8 pi_major;
+	int type;
+	int ret = -1;
+	int n = 0;
+
+	IRDA_ASSERT(buf != NULL, return ret;);
+	IRDA_ASSERT(info != 0, return ret;);
+
+	pi_minor = buf[n] & info->pi_mask;
+	pi_major = buf[n] >> info->pi_major_offset;
+
+	/* Check if the identifier value (pi) is valid */
+	if ((pi_major > info->len-1) ||
+	    (pi_minor > info->tables[pi_major].len-1))
+	{
+		IRDA_DEBUG(0, "%s(), no handler for parameter=0x%02x\n",
+			   __FUNCTION__, buf[0]);
+
+		/* Skip this parameter */
+		return 2 + buf[n + 1];  /* Continue */
+	}
+
+	/* Lookup the info on how to parse this parameter */
+	pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor];
+
+	/* Find expected data type for this parameter identifier (pi)*/
+	type = pi_minor_info->type;
+
+	IRDA_DEBUG(3, "%s(), pi=[%d,%d], type=%d\n", __FUNCTION__,
+		   pi_major, pi_minor, type);
+
+	/*  Check if handler has been implemented */
+	if (!pi_minor_info->func) {
+		IRDA_MESSAGE("%s: no handler for pi=%#x\n",
+			     __FUNCTION__, buf[n]);
+		/* Skip this parameter */
+		return 2 + buf[n + 1]; /* Continue */
+	}
+
+	/* Parse parameter value */
+	ret = (*pv_extract_table[type & PV_MASK])(self, buf+n, len, buf[n],
+						  type, pi_minor_info->func);
+	return ret;
+}
+
+/*
+ * Function irda_param_extract_all (self, buf, len, info)
+ *
+ *    Parse all parameters. If len is correct, then everything should be
+ *    safe. Returns the number of bytes that was parsed
+ *
+ */
+int irda_param_extract_all(void *self, __u8 *buf, int len, 
+			   pi_param_info_t *info)
+{
+	int ret = -1;
+	int n = 0;
+
+	IRDA_ASSERT(buf != NULL, return ret;);
+	IRDA_ASSERT(info != 0, return ret;);
+
+	/*
+	 * Parse all parameters. Each parameter must be at least two bytes
+	 * long or else there is no point in trying to parse it
+	 */
+	while (len > 2) {
+		ret = irda_param_extract(self, buf+n, len, info);
+		if (ret < 0)
+			return ret;
+
+		n += ret;
+		len -= ret;
+	}
+	return n;
+}
+EXPORT_SYMBOL(irda_param_extract_all);
diff --git a/net/irda/qos.c b/net/irda/qos.c
new file mode 100644
index 00000000000..df732d56cc5
--- /dev/null
+++ b/net/irda/qos.c
@@ -0,0 +1,774 @@
+/*********************************************************************
+ *                                
+ * Filename:      qos.c
+ * Version:       1.0
+ * Description:   IrLAP QoS parameter negotiation
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Tue Sep  9 00:00:26 1997
+ * Modified at:   Sun Jan 30 14:29:16 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ * 
+ *     This program is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *     GNU General Public License for more details.
+ * 
+ *     You should have received a copy of the GNU General Public License 
+ *     along with this program; if not, write to the Free Software 
+ *     Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
+ *     MA 02111-1307 USA
+ *     
+ ********************************************************************/
+
+#include <linux/config.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/parameters.h>
+#include <net/irda/qos.h>
+#include <net/irda/irlap.h>
+
+/*
+ * Maximum values of the baud rate we negociate with the other end.
+ * Most often, you don't have to change that, because Linux-IrDA will
+ * use the maximum offered by the link layer, which usually works fine.
+ * In some very rare cases, you may want to limit it to lower speeds...
+ */
+int sysctl_max_baud_rate = 16000000;
+/*
+ * Maximum value of the lap disconnect timer we negociate with the other end.
+ * Most often, the value below represent the best compromise, but some user
+ * may want to keep the LAP alive longuer or shorter in case of link failure.
+ * Remember that the threshold time (early warning) is fixed to 3s...
+ */
+int sysctl_max_noreply_time = 12;
+/*
+ * Minimum turn time to be applied before transmitting to the peer.
+ * Nonzero values (usec) are used as lower limit to the per-connection
+ * mtt value which was announced by the other end during negotiation.
+ * Might be helpful if the peer device provides too short mtt.
+ * Default is 10us which means using the unmodified value given by the
+ * peer except if it's 0 (0 is likely a bug in the other stack).
+ */
+unsigned sysctl_min_tx_turn_time = 10;
+/*
+ * Maximum data size to be used in transmission in payload of LAP frame.
+ * There is a bit of confusion in the IrDA spec :
+ * The LAP spec defines the payload of a LAP frame (I field) to be
+ * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40).
+ * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY
+ * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header
+ * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP
+ * payload), that's only 2042 bytes. Oups !
+ * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s,
+ * so adjust to 2042... I don't know if this bug applies only for 2048
+ * bytes frames or all negotiated frame sizes, but you can use the sysctl
+ * to play with this value anyway.
+ * Jean II */
+unsigned sysctl_max_tx_data_size = 2042;
+/*
+ * Maximum transmit window, i.e. number of LAP frames between turn-around.
+ * This allow to override what the peer told us. Some peers are buggy and
+ * don't always support what they tell us.
+ * Jean II */
+unsigned sysctl_max_tx_window = 7;
+
+static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
+static int irlap_param_link_disconnect(void *instance, irda_param_t *parm, 
+				       int get);
+static int irlap_param_max_turn_time(void *instance, irda_param_t *param, 
+				     int get);
+static int irlap_param_data_size(void *instance, irda_param_t *param, int get);
+static int irlap_param_window_size(void *instance, irda_param_t *param, 
+				   int get);
+static int irlap_param_additional_bofs(void *instance, irda_param_t *parm, 
+				       int get);
+static int irlap_param_min_turn_time(void *instance, irda_param_t *param, 
+				     int get);
+
+#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
+static __u32 irlap_requested_line_capacity(struct qos_info *qos);
+#endif
+
+static __u32 min_turn_times[]  = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */
+static __u32 baud_rates[]      = { 2400, 9600, 19200, 38400, 57600, 115200, 576000, 
+				   1152000, 4000000, 16000000 };           /* bps */
+static __u32 data_sizes[]      = { 64, 128, 256, 512, 1024, 2048 };        /* bytes */
+static __u32 add_bofs[]        = { 48, 24, 12, 5, 3, 2, 1, 0 };            /* bytes */
+static __u32 max_turn_times[]  = { 500, 250, 100, 50 };                    /* ms */
+static __u32 link_disc_times[] = { 3, 8, 12, 16, 20, 25, 30, 40 };         /* secs */
+
+static __u32 max_line_capacities[10][4] = {
+       /* 500 ms     250 ms  100 ms  50 ms (max turn time) */
+	{    100,      0,      0,     0 }, /*     2400 bps */
+	{    400,      0,      0,     0 }, /*     9600 bps */
+	{    800,      0,      0,     0 }, /*    19200 bps */
+	{   1600,      0,      0,     0 }, /*    38400 bps */
+	{   2360,      0,      0,     0 }, /*    57600 bps */
+	{   4800,   2400,    960,   480 }, /*   115200 bps */
+	{  28800,  11520,   5760,  2880 }, /*   576000 bps */
+	{  57600,  28800,  11520,  5760 }, /*  1152000 bps */
+	{ 200000, 100000,  40000, 20000 }, /*  4000000 bps */
+	{ 800000, 400000, 160000, 80000 }, /* 16000000 bps */
+};
+
+static pi_minor_info_t pi_minor_call_table_type_0[] = {
+	{ NULL, 0 },
+/* 01 */{ irlap_param_baud_rate,       PV_INTEGER | PV_LITTLE_ENDIAN },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+	{ NULL, 0 },
+/* 08 */{ irlap_param_link_disconnect, PV_INT_8_BITS }
+};
+
+static pi_minor_info_t pi_minor_call_table_type_1[] = {
+	{ NULL, 0 },
+	{ NULL, 0 },
+/* 82 */{ irlap_param_max_turn_time,   PV_INT_8_BITS },
+/* 83 */{ irlap_param_data_size,       PV_INT_8_BITS },
+/* 84 */{ irlap_param_window_size,     PV_INT_8_BITS },
+/* 85 */{ irlap_param_additional_bofs, PV_INT_8_BITS },
+/* 86 */{ irlap_param_min_turn_time,   PV_INT_8_BITS },
+};
+
+static pi_major_info_t pi_major_call_table[] = {
+	{ pi_minor_call_table_type_0, 9 },
+	{ pi_minor_call_table_type_1, 7 },
+};
+
+static pi_param_info_t irlap_param_info = { pi_major_call_table, 2, 0x7f, 7 };
+
+/* ---------------------- LOCAL SUBROUTINES ---------------------- */
+/* Note : we start with a bunch of local subroutines.
+ * As the compiler is "one pass", this is the only way to get them to
+ * inline properly...
+ * Jean II
+ */
+/*
+ * Function value_index (value, array, size)
+ *
+ *    Returns the index to the value in the specified array
+ */
+static inline int value_index(__u32 value, __u32 *array, int size)
+{
+	int i;
+	
+	for (i=0; i < size; i++)
+		if (array[i] == value)
+			break;
+	return i;
+}
+
+/*
+ * Function index_value (index, array)
+ *
+ *    Returns value to index in array, easy!
+ *
+ */
+static inline __u32 index_value(int index, __u32 *array) 
+{
+	return array[index];
+}
+
+/*
+ * Function msb_index (word)
+ *
+ *    Returns index to most significant bit (MSB) in word
+ *
+ */
+static int msb_index (__u16 word) 
+{
+	__u16 msb = 0x8000;
+	int index = 15;   /* Current MSB */
+
+	/* Check for buggy peers.
+	 * Note : there is a small probability that it could be us, but I
+	 * would expect driver authors to catch that pretty early and be
+	 * able to check precisely what's going on. If a end user sees this,
+	 * it's very likely the peer. - Jean II */
+	if (word == 0) {
+		IRDA_WARNING("%s(), Detected buggy peer, adjust null PV to 0x1!\n",
+			 __FUNCTION__);
+		/* The only safe choice (we don't know the array size) */
+		word = 0x1;
+	}
+
+	while (msb) {
+		if (word & msb)
+			break;   /* Found it! */
+		msb >>=1;
+		index--;
+	}
+	return index;
+}
+
+/*
+ * Function value_lower_bits (value, array)
+ *
+ *    Returns a bit field marking all possibility lower than value.
+ */
+static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field)
+{
+	int	i;
+	__u16	mask = 0x1;
+	__u16	result = 0x0;
+
+	for (i=0; i < size; i++) {
+		/* Add the current value to the bit field, shift mask */
+		result |= mask;
+		mask <<= 1;
+		/* Finished ? */
+		if (array[i] >= value)
+			break;
+	}
+	/* Send back a valid index */
+	if(i >= size)
+	  i = size - 1;	/* Last item */
+	*field = result;
+	return i;
+}
+
+/*
+ * Function value_highest_bit (value, array)
+ *
+ *    Returns a bit field marking the highest possibility lower than value.
+ */
+static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field)
+{
+	int	i;
+	__u16	mask = 0x1;
+	__u16	result = 0x0;
+
+	for (i=0; i < size; i++) {
+		/* Finished ? */
+		if (array[i] <= value)
+			break;
+		/* Shift mask */
+		mask <<= 1;
+	}
+	/* Set the current value to the bit field */
+	result |= mask;
+	/* Send back a valid index */
+	if(i >= size)
+	  i = size - 1;	/* Last item */
+	*field = result;
+	return i;
+}
+
+/* -------------------------- MAIN CALLS -------------------------- */
+
+/*
+ * Function irda_qos_compute_intersection (qos, new)
+ *
+ *    Compute the intersection of the old QoS capabilities with new ones
+ *
+ */
+void irda_qos_compute_intersection(struct qos_info *qos, struct qos_info *new)
+{
+	IRDA_ASSERT(qos != NULL, return;);
+	IRDA_ASSERT(new != NULL, return;);
+
+	/* Apply */
+	qos->baud_rate.bits       &= new->baud_rate.bits;
+	qos->window_size.bits     &= new->window_size.bits;
+	qos->min_turn_time.bits   &= new->min_turn_time.bits;
+	qos->max_turn_time.bits   &= new->max_turn_time.bits;
+	qos->data_size.bits       &= new->data_size.bits;
+	qos->link_disc_time.bits  &= new->link_disc_time.bits;
+	qos->additional_bofs.bits &= new->additional_bofs.bits;
+
+	irda_qos_bits_to_value(qos);
+}
+
+/*
+ * Function irda_init_max_qos_capabilies (qos)
+ *
+ *    The purpose of this function is for layers and drivers to be able to
+ *    set the maximum QoS possible and then "and in" their own limitations
+ * 
+ */
+void irda_init_max_qos_capabilies(struct qos_info *qos)
+{
+	int i;
+	/* 
+	 *  These are the maximum supported values as specified on pages
+	 *  39-43 in IrLAP
+	 */
+
+	/* Use sysctl to set some configurable values... */
+	/* Set configured max speed */
+	i = value_lower_bits(sysctl_max_baud_rate, baud_rates, 10,
+			     &qos->baud_rate.bits);
+	sysctl_max_baud_rate = index_value(i, baud_rates);
+
+	/* Set configured max disc time */
+	i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8,
+			     &qos->link_disc_time.bits);
+	sysctl_max_noreply_time = index_value(i, link_disc_times);
+
+	/* LSB is first byte, MSB is second byte */
+	qos->baud_rate.bits    &= 0x03ff;
+
+	qos->window_size.bits     = 0x7f;
+	qos->min_turn_time.bits   = 0xff;
+	qos->max_turn_time.bits   = 0x0f;
+	qos->data_size.bits       = 0x3f;
+	qos->link_disc_time.bits &= 0xff;
+	qos->additional_bofs.bits = 0xff;
+}
+EXPORT_SYMBOL(irda_init_max_qos_capabilies);
+
+/*
+ * Function irlap_adjust_qos_settings (qos)
+ *
+ *     Adjust QoS settings in case some values are not possible to use because
+ *     of other settings
+ */
+static void irlap_adjust_qos_settings(struct qos_info *qos)
+{
+	__u32 line_capacity;
+	int index;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/*
+	 * Make sure the mintt is sensible.
+	 * Main culprit : Ericsson T39. - Jean II
+	 */
+	if (sysctl_min_tx_turn_time > qos->min_turn_time.value) {
+		int i;
+
+		IRDA_WARNING("%s(), Detected buggy peer, adjust mtt to %dus!\n",
+			 __FUNCTION__, sysctl_min_tx_turn_time);
+
+		/* We don't really need bits, but easier this way */
+		i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times,
+				      8, &qos->min_turn_time.bits);
+		sysctl_min_tx_turn_time = index_value(i, min_turn_times);
+		qos->min_turn_time.value = sysctl_min_tx_turn_time;
+	}
+
+	/* 
+	 * Not allowed to use a max turn time less than 500 ms if the baudrate
+	 * is less than 115200
+	 */
+	if ((qos->baud_rate.value < 115200) && 
+	    (qos->max_turn_time.value < 500))
+	{
+		IRDA_DEBUG(0, 
+			   "%s(), adjusting max turn time from %d to 500 ms\n",
+			   __FUNCTION__, qos->max_turn_time.value);
+		qos->max_turn_time.value = 500;
+	}
+	
+	/*
+	 * The data size must be adjusted according to the baud rate and max 
+	 * turn time
+	 */
+	index = value_index(qos->data_size.value, data_sizes, 6);
+	line_capacity = irlap_max_line_capacity(qos->baud_rate.value, 
+						qos->max_turn_time.value);
+
+#ifdef CONFIG_IRDA_DYNAMIC_WINDOW
+	while ((qos->data_size.value > line_capacity) && (index > 0)) {
+		qos->data_size.value = data_sizes[index--];
+		IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
+			   __FUNCTION__, qos->data_size.value);
+	}
+#else /* Use method described in section 6.6.11 of IrLAP */
+	while (irlap_requested_line_capacity(qos) > line_capacity) {
+		IRDA_ASSERT(index != 0, return;);
+
+		/* Must be able to send at least one frame */
+		if (qos->window_size.value > 1) {
+			qos->window_size.value--;
+			IRDA_DEBUG(2, "%s(), reducing window size to %d\n",
+				   __FUNCTION__, qos->window_size.value);
+		} else if (index > 1) {
+			qos->data_size.value = data_sizes[index--];
+			IRDA_DEBUG(2, "%s(), reducing data size to %d\n",
+				   __FUNCTION__, qos->data_size.value);
+		} else {
+			IRDA_WARNING("%s(), nothing more we can do!\n",
+				     __FUNCTION__);
+		}
+	}
+#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */
+	/*
+	 * Fix tx data size according to user limits - Jean II
+	 */
+	if (qos->data_size.value > sysctl_max_tx_data_size)
+		/* Allow non discrete adjustement to avoid loosing capacity */
+		qos->data_size.value = sysctl_max_tx_data_size;
+	/*
+	 * Override Tx window if user request it. - Jean II
+	 */
+	if (qos->window_size.value > sysctl_max_tx_window)
+		qos->window_size.value = sysctl_max_tx_window;
+}
+
+/*
+ * Function irlap_negotiate (qos_device, qos_session, skb)
+ *
+ *    Negotiate QoS values, not really that much negotiation :-)
+ *    We just set the QoS capabilities for the peer station
+ *
+ */
+int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb) 
+{
+	int ret;
+	
+	ret = irda_param_extract_all(self, skb->data, skb->len, 
+				     &irlap_param_info);
+	
+	/* Convert the negotiated bits to values */
+	irda_qos_bits_to_value(&self->qos_tx);
+	irda_qos_bits_to_value(&self->qos_rx);
+
+	irlap_adjust_qos_settings(&self->qos_tx);
+
+	IRDA_DEBUG(2, "Setting BAUD_RATE to %d bps.\n", 
+		   self->qos_tx.baud_rate.value);
+	IRDA_DEBUG(2, "Setting DATA_SIZE to %d bytes\n",
+		   self->qos_tx.data_size.value);
+	IRDA_DEBUG(2, "Setting WINDOW_SIZE to %d\n", 
+		   self->qos_tx.window_size.value);
+	IRDA_DEBUG(2, "Setting XBOFS to %d\n", 
+		   self->qos_tx.additional_bofs.value);
+	IRDA_DEBUG(2, "Setting MAX_TURN_TIME to %d ms.\n",
+		   self->qos_tx.max_turn_time.value);
+	IRDA_DEBUG(2, "Setting MIN_TURN_TIME to %d usecs.\n",
+		   self->qos_tx.min_turn_time.value);
+	IRDA_DEBUG(2, "Setting LINK_DISC to %d secs.\n", 
+		   self->qos_tx.link_disc_time.value);
+	return ret;
+}
+
+/*
+ * Function irlap_insert_negotiation_params (qos, fp)
+ *
+ *    Insert QoS negotiaion pararameters into frame
+ *
+ */
+int irlap_insert_qos_negotiation_params(struct irlap_cb *self, 
+					struct sk_buff *skb)
+{
+	int ret;
+
+	/* Insert data rate */
+	ret = irda_param_insert(self, PI_BAUD_RATE, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert max turnaround time */
+	ret = irda_param_insert(self, PI_MAX_TURN_TIME, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert data size */
+	ret = irda_param_insert(self, PI_DATA_SIZE, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert window size */
+	ret = irda_param_insert(self, PI_WINDOW_SIZE, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert additional BOFs */
+	ret = irda_param_insert(self, PI_ADD_BOFS, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert minimum turnaround time */
+	ret = irda_param_insert(self, PI_MIN_TURN_TIME, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	/* Insert link disconnect/threshold time */
+	ret = irda_param_insert(self, PI_LINK_DISC, skb->tail, 
+				skb_tailroom(skb), &irlap_param_info);
+	if (ret < 0)
+		return ret;
+	skb_put(skb, ret);
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_baud_rate (instance, param, get)
+ *
+ *    Negotiate data-rate
+ *
+ */
+static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get)
+{
+	__u16 final;
+
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+
+	if (get) {
+		param->pv.i = self->qos_rx.baud_rate.bits;
+		IRDA_DEBUG(2, "%s(), baud rate = 0x%02x\n", 
+			   __FUNCTION__, param->pv.i);		
+	} else {
+		/* 
+		 *  Stations must agree on baud rate, so calculate
+		 *  intersection 
+		 */
+		IRDA_DEBUG(2, "Requested BAUD_RATE: 0x%04x\n", (__u16) param->pv.i);
+		final = (__u16) param->pv.i & self->qos_rx.baud_rate.bits;
+
+		IRDA_DEBUG(2, "Final BAUD_RATE: 0x%04x\n", final);
+		self->qos_tx.baud_rate.bits = final;
+		self->qos_rx.baud_rate.bits = final;
+	}
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_link_disconnect (instance, param, get)
+ *
+ *    Negotiate link disconnect/threshold time. 
+ *
+ */
+static int irlap_param_link_disconnect(void *instance, irda_param_t *param, 
+				       int get)
+{
+	__u16 final;
+	
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.link_disc_time.bits;
+	else {
+		/*  
+		 *  Stations must agree on link disconnect/threshold 
+		 *  time.
+		 */
+		IRDA_DEBUG(2, "LINK_DISC: %02x\n", (__u8) param->pv.i);
+		final = (__u8) param->pv.i & self->qos_rx.link_disc_time.bits;
+
+		IRDA_DEBUG(2, "Final LINK_DISC: %02x\n", final);
+		self->qos_tx.link_disc_time.bits = final;
+		self->qos_rx.link_disc_time.bits = final;
+	}
+	return 0;
+}
+
+/*
+ * Function irlap_param_max_turn_time (instance, param, get)
+ *
+ *    Negotiate the maximum turnaround time. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ *
+ */
+static int irlap_param_max_turn_time(void *instance, irda_param_t *param, 
+				     int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.max_turn_time.bits;
+	else
+		self->qos_tx.max_turn_time.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_data_size (instance, param, get)
+ *
+ *    Negotiate the data size. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ *
+ */
+static int irlap_param_data_size(void *instance, irda_param_t *param, int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.data_size.bits;
+	else
+		self->qos_tx.data_size.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_window_size (instance, param, get)
+ *
+ *    Negotiate the window size. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ *
+ */
+static int irlap_param_window_size(void *instance, irda_param_t *param, 
+				   int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.window_size.bits;
+	else
+		self->qos_tx.window_size.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_additional_bofs (instance, param, get)
+ *
+ *    Negotiate additional BOF characters. This is a type 1 parameter and
+ *    will be negotiated independently for each station.
+ */
+static int irlap_param_additional_bofs(void *instance, irda_param_t *param, int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.additional_bofs.bits;
+	else
+		self->qos_tx.additional_bofs.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_param_min_turn_time (instance, param, get)
+ *
+ *    Negotiate the minimum turn around time. This is a type 1 parameter and
+ *    will be negotiated independently for each station
+ */
+static int irlap_param_min_turn_time(void *instance, irda_param_t *param, 
+				     int get)
+{
+	struct irlap_cb *self = (struct irlap_cb *) instance;
+	
+	IRDA_ASSERT(self != NULL, return -1;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;);
+	
+	if (get)
+		param->pv.i = self->qos_rx.min_turn_time.bits;
+	else
+		self->qos_tx.min_turn_time.bits = (__u8) param->pv.i;
+
+	return 0;
+}
+
+/*
+ * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time)
+ *
+ *    Calculate the maximum line capacity
+ *
+ */
+__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time)
+{
+	__u32 line_capacity;
+	int i,j;
+
+	IRDA_DEBUG(2, "%s(), speed=%d, max_turn_time=%d\n",
+		   __FUNCTION__, speed, max_turn_time);
+
+	i = value_index(speed, baud_rates, 10);
+	j = value_index(max_turn_time, max_turn_times, 4);
+
+	IRDA_ASSERT(((i >=0) && (i <10)), return 0;);
+	IRDA_ASSERT(((j >=0) && (j <4)), return 0;);
+
+	line_capacity = max_line_capacities[i][j];
+
+	IRDA_DEBUG(2, "%s(), line capacity=%d bytes\n", 
+		   __FUNCTION__, line_capacity);
+	
+	return line_capacity;
+}
+
+#ifndef CONFIG_IRDA_DYNAMIC_WINDOW
+static __u32 irlap_requested_line_capacity(struct qos_info *qos)
+{
+	__u32 line_capacity;
+
+	line_capacity = qos->window_size.value *
+		(qos->data_size.value + 6 + qos->additional_bofs.value) +
+		irlap_min_turn_time_in_bytes(qos->baud_rate.value,
+					     qos->min_turn_time.value);
+
+	IRDA_DEBUG(2, "%s(), requested line capacity=%d\n",
+		   __FUNCTION__, line_capacity);
+
+	return line_capacity;
+}
+#endif
+
+void irda_qos_bits_to_value(struct qos_info *qos)
+{
+	int index;
+
+	IRDA_ASSERT(qos != NULL, return;);
+	
+	index = msb_index(qos->baud_rate.bits);
+	qos->baud_rate.value = baud_rates[index];
+
+	index = msb_index(qos->data_size.bits);
+	qos->data_size.value = data_sizes[index];
+
+	index = msb_index(qos->window_size.bits);
+	qos->window_size.value = index+1;
+
+	index = msb_index(qos->min_turn_time.bits);
+	qos->min_turn_time.value = min_turn_times[index];
+	
+	index = msb_index(qos->max_turn_time.bits);
+	qos->max_turn_time.value = max_turn_times[index];
+
+	index = msb_index(qos->link_disc_time.bits);
+	qos->link_disc_time.value = link_disc_times[index];
+	
+	index = msb_index(qos->additional_bofs.bits);
+	qos->additional_bofs.value = add_bofs[index];
+}
+EXPORT_SYMBOL(irda_qos_bits_to_value);
diff --git a/net/irda/timer.c b/net/irda/timer.c
new file mode 100644
index 00000000000..0e17f976add
--- /dev/null
+++ b/net/irda/timer.c
@@ -0,0 +1,233 @@
+/*********************************************************************
+ *                
+ * Filename:      timer.c
+ * Version:       
+ * Description:   
+ * Status:        Experimental.
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Sat Aug 16 00:59:29 1997
+ * Modified at:   Wed Dec  8 12:50:34 1999
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, 
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *     
+ *     This program is free software; you can redistribute it and/or 
+ *     modify it under the terms of the GNU General Public License as 
+ *     published by the Free Software Foundation; either version 2 of 
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is 
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <asm/system.h>
+#include <linux/config.h>
+#include <linux/delay.h>
+
+#include <net/irda/timer.h>
+#include <net/irda/irda.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlmp.h>
+
+extern int  sysctl_slot_timeout;
+
+static void irlap_slot_timer_expired(void* data);
+static void irlap_query_timer_expired(void* data);
+static void irlap_final_timer_expired(void* data);
+static void irlap_wd_timer_expired(void* data);
+static void irlap_backoff_timer_expired(void* data);
+static void irlap_media_busy_expired(void* data); 
+
+void irlap_start_slot_timer(struct irlap_cb *self, int timeout)
+{
+	irda_start_timer(&self->slot_timer, timeout, (void *) self, 
+			 irlap_slot_timer_expired);
+}
+
+void irlap_start_query_timer(struct irlap_cb *self, int S, int s)
+{
+	int timeout;
+
+	/* Calculate when the peer discovery should end. Normally, we
+	 * get the end-of-discovery frame, so this is just in case
+	 * we miss it.
+	 * Basically, we multiply the number of remaining slots by our
+	 * slot time, plus add some extra time to properly receive the last
+	 * discovery packet (which is longer due to extra discovery info),
+	 * to avoid messing with for incomming connections requests and
+	 * to accomodate devices that perform discovery slower than us.
+	 * Jean II */
+	timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s)
+		   + XIDEXTRA_TIMEOUT + SMALLBUSY_TIMEOUT);
+
+	/* Set or re-set the timer. We reset the timer for each received
+	 * discovery query, which allow us to automatically adjust to
+	 * the speed of the peer discovery (faster or slower). Jean II */
+	irda_start_timer( &self->query_timer, timeout, (void *) self, 
+			  irlap_query_timer_expired);
+}
+
+void irlap_start_final_timer(struct irlap_cb *self, int timeout)
+{
+	irda_start_timer(&self->final_timer, timeout, (void *) self, 
+			 irlap_final_timer_expired);
+}
+
+void irlap_start_wd_timer(struct irlap_cb *self, int timeout)
+{
+	irda_start_timer(&self->wd_timer, timeout, (void *) self, 
+			 irlap_wd_timer_expired);
+}
+
+void irlap_start_backoff_timer(struct irlap_cb *self, int timeout)
+{
+	irda_start_timer(&self->backoff_timer, timeout, (void *) self, 
+			 irlap_backoff_timer_expired);
+}
+
+void irlap_start_mbusy_timer(struct irlap_cb *self, int timeout)
+{
+	irda_start_timer(&self->media_busy_timer, timeout, 
+			 (void *) self, irlap_media_busy_expired);
+}
+
+void irlap_stop_mbusy_timer(struct irlap_cb *self)
+{
+	/* If timer is activated, kill it! */
+	del_timer(&self->media_busy_timer);
+
+	/* If we are in NDM, there is a bunch of events in LAP that
+	 * that be pending due to the media_busy condition, such as
+	 * CONNECT_REQUEST and SEND_UI_FRAME. If we don't generate
+	 * an event, they will wait forever...
+	 * Jean II */
+	if (self->state == LAP_NDM)
+		irlap_do_event(self, MEDIA_BUSY_TIMER_EXPIRED, NULL, NULL);
+}
+
+void irlmp_start_watchdog_timer(struct lsap_cb *self, int timeout) 
+{
+	irda_start_timer(&self->watchdog_timer, timeout, (void *) self,
+			 irlmp_watchdog_timer_expired);
+}
+
+void irlmp_start_discovery_timer(struct irlmp_cb *self, int timeout) 
+{
+	irda_start_timer(&self->discovery_timer, timeout, (void *) self,
+			 irlmp_discovery_timer_expired);
+}
+
+void irlmp_start_idle_timer(struct lap_cb *self, int timeout) 
+{
+	irda_start_timer(&self->idle_timer, timeout, (void *) self,
+			 irlmp_idle_timer_expired);
+}
+
+void irlmp_stop_idle_timer(struct lap_cb *self) 
+{
+	/* If timer is activated, kill it! */
+	del_timer(&self->idle_timer);
+}
+
+/*
+ * Function irlap_slot_timer_expired (data)
+ *
+ *    IrLAP slot timer has expired
+ *
+ */
+static void irlap_slot_timer_expired(void *data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	irlap_do_event(self, SLOT_TIMER_EXPIRED, NULL, NULL);
+} 
+
+/*
+ * Function irlap_query_timer_expired (data)
+ *
+ *    IrLAP query timer has expired
+ *
+ */
+static void irlap_query_timer_expired(void *data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	irlap_do_event(self, QUERY_TIMER_EXPIRED, NULL, NULL);
+} 
+
+/*
+ * Function irda_final_timer_expired (data)
+ *
+ *    
+ *
+ */
+static void irlap_final_timer_expired(void *data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+
+	irlap_do_event(self, FINAL_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Function irda_wd_timer_expired (data)
+ *
+ *    
+ *
+ */
+static void irlap_wd_timer_expired(void *data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+	
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	
+	irlap_do_event(self, WD_TIMER_EXPIRED, NULL, NULL);
+}
+
+/*
+ * Function irda_backoff_timer_expired (data)
+ *
+ *    
+ *
+ */
+static void irlap_backoff_timer_expired(void *data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+	
+	IRDA_ASSERT(self != NULL, return;);
+	IRDA_ASSERT(self->magic == LAP_MAGIC, return;);
+	
+	irlap_do_event(self, BACKOFF_TIMER_EXPIRED, NULL, NULL);
+}
+
+
+/*
+ * Function irtty_media_busy_expired (data)
+ *
+ *    
+ */
+void irlap_media_busy_expired(void* data)
+{
+	struct irlap_cb *self = (struct irlap_cb *) data;
+
+	IRDA_ASSERT(self != NULL, return;);
+
+	irda_device_set_media_busy(self->netdev, FALSE);
+	/* Note : the LAP event will be send in irlap_stop_mbusy_timer(),
+	* to catch other cases where the flag is cleared (for example
+	* after a discovery) - Jean II */
+}
diff --git a/net/irda/wrapper.c b/net/irda/wrapper.c
new file mode 100644
index 00000000000..87130c1c869
--- /dev/null
+++ b/net/irda/wrapper.c
@@ -0,0 +1,491 @@
+/*********************************************************************
+ *
+ * Filename:      wrapper.c
+ * Version:       1.2
+ * Description:   IrDA SIR async wrapper layer
+ * Status:        Stable
+ * Author:        Dag Brattli <dagb@cs.uit.no>
+ * Created at:    Mon Aug  4 20:40:53 1997
+ * Modified at:   Fri Jan 28 13:21:09 2000
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * Modified at:   Fri May 28  3:11 CST 1999
+ * Modified by:   Horst von Brand <vonbrand@sleipnir.valparaiso.cl>
+ *
+ *     Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>,
+ *     All Rights Reserved.
+ *     Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ *     This program is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     Neither Dag Brattli nor University of Tromsų admit liability nor
+ *     provide warranty for any of this software. This material is
+ *     provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/crc.h>
+#include <net/irda/irlap.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/irda_device.h>
+
+/************************** FRAME WRAPPING **************************/
+/*
+ * Unwrap and unstuff SIR frames
+ *
+ * Note : at FIR and MIR, HDLC framing is used and usually handled
+ * by the controller, so we come here only for SIR... Jean II
+ */
+
+/*
+ * Function stuff_byte (byte, buf)
+ *
+ *    Byte stuff one single byte and put the result in buffer pointed to by
+ *    buf. The buffer must at all times be able to have two bytes inserted.
+ *
+ * This is in a tight loop, better inline it, so need to be prior to callers.
+ * (2000 bytes on P6 200MHz, non-inlined ~370us, inline ~170us) - Jean II
+ */
+static inline int stuff_byte(__u8 byte, __u8 *buf)
+{
+	switch (byte) {
+	case BOF: /* FALLTHROUGH */
+	case EOF: /* FALLTHROUGH */
+	case CE:
+		/* Insert transparently coded */
+		buf[0] = CE;               /* Send link escape */
+		buf[1] = byte^IRDA_TRANS;    /* Complement bit 5 */
+		return 2;
+		/* break; */
+	default:
+		 /* Non-special value, no transparency required */
+		buf[0] = byte;
+		return 1;
+		/* break; */
+	}
+}
+
+/*
+ * Function async_wrap (skb, *tx_buff, buffsize)
+ *
+ *    Makes a new buffer with wrapping and stuffing, should check that
+ *    we don't get tx buffer overflow.
+ */
+int async_wrap_skb(struct sk_buff *skb, __u8 *tx_buff, int buffsize)
+{
+	struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
+	int xbofs;
+	int i;
+	int n;
+	union {
+		__u16 value;
+		__u8 bytes[2];
+	} fcs;
+
+	/* Initialize variables */
+	fcs.value = INIT_FCS;
+	n = 0;
+
+	/*
+	 *  Send  XBOF's for required min. turn time and for the negotiated
+	 *  additional XBOFS
+	 */
+
+	if (cb->magic != LAP_MAGIC) {
+		/*
+		 * This will happen for all frames sent from user-space.
+		 * Nothing to worry about, but we set the default number of
+		 * BOF's
+		 */
+		IRDA_DEBUG(1, "%s(), wrong magic in skb!\n", __FUNCTION__);
+		xbofs = 10;
+	} else
+		xbofs = cb->xbofs + cb->xbofs_delay;
+
+	IRDA_DEBUG(4, "%s(), xbofs=%d\n", __FUNCTION__, xbofs);
+
+	/* Check that we never use more than 115 + 48 xbofs */
+	if (xbofs > 163) {
+		IRDA_DEBUG(0, "%s(), too many xbofs (%d)\n", __FUNCTION__,
+			   xbofs);
+		xbofs = 163;
+	}
+
+	memset(tx_buff + n, XBOF, xbofs);
+	n += xbofs;
+
+	/* Start of packet character BOF */
+	tx_buff[n++] = BOF;
+
+	/* Insert frame and calc CRC */
+	for (i=0; i < skb->len; i++) {
+		/*
+		 *  Check for the possibility of tx buffer overflow. We use
+		 *  bufsize-5 since the maximum number of bytes that can be
+		 *  transmitted after this point is 5.
+		 */
+		if(n >= (buffsize-5)) {
+			IRDA_ERROR("%s(), tx buffer overflow (n=%d)\n",
+				   __FUNCTION__, n);
+			return n;
+		}
+
+		n += stuff_byte(skb->data[i], tx_buff+n);
+		fcs.value = irda_fcs(fcs.value, skb->data[i]);
+	}
+
+	/* Insert CRC in little endian format (LSB first) */
+	fcs.value = ~fcs.value;
+#ifdef __LITTLE_ENDIAN
+	n += stuff_byte(fcs.bytes[0], tx_buff+n);
+	n += stuff_byte(fcs.bytes[1], tx_buff+n);
+#else /* ifdef __BIG_ENDIAN */
+	n += stuff_byte(fcs.bytes[1], tx_buff+n);
+	n += stuff_byte(fcs.bytes[0], tx_buff+n);
+#endif
+	tx_buff[n++] = EOF;
+
+	return n;
+}
+EXPORT_SYMBOL(async_wrap_skb);
+
+/************************* FRAME UNWRAPPING *************************/
+/*
+ * Unwrap and unstuff SIR frames
+ *
+ * Complete rewrite by Jean II :
+ * More inline, faster, more compact, more logical. Jean II
+ * (16 bytes on P6 200MHz, old 5 to 7 us, new 4 to 6 us)
+ * (24 bytes on P6 200MHz, old 9 to 10 us, new 7 to 8 us)
+ * (for reference, 115200 b/s is 1 byte every 69 us)
+ * And reduce wrapper.o by ~900B in the process ;-)
+ *
+ * Then, we have the addition of ZeroCopy, which is optional
+ * (i.e. the driver must initiate it) and improve final processing.
+ * (2005 B frame + EOF on P6 200MHz, without 30 to 50 us, with 10 to 25 us)
+ *
+ * Note : at FIR and MIR, HDLC framing is used and usually handled
+ * by the controller, so we come here only for SIR... Jean II
+ */
+
+/*
+ * We can also choose where we want to do the CRC calculation. We can
+ * do it "inline", as we receive the bytes, or "postponed", when
+ * receiving the End-Of-Frame.
+ * (16 bytes on P6 200MHz, inlined 4 to 6 us, postponed 4 to 5 us)
+ * (24 bytes on P6 200MHz, inlined 7 to 8 us, postponed 5 to 7 us)
+ * With ZeroCopy :
+ * (2005 B frame on P6 200MHz, inlined 10 to 25 us, postponed 140 to 180 us)
+ * Without ZeroCopy :
+ * (2005 B frame on P6 200MHz, inlined 30 to 50 us, postponed 150 to 180 us)
+ * (Note : numbers taken with irq disabled)
+ *
+ * From those numbers, it's not clear which is the best strategy, because
+ * we end up running through a lot of data one way or another (i.e. cache
+ * misses). I personally prefer to avoid the huge latency spike of the
+ * "postponed" solution, because it come just at the time when we have
+ * lot's of protocol processing to do and it will hurt our ability to
+ * reach low link turnaround times... Jean II
+ */
+//#define POSTPONE_RX_CRC
+
+/*
+ * Function async_bump (buf, len, stats)
+ *
+ *    Got a frame, make a copy of it, and pass it up the stack! We can try
+ *    to inline it since it's only called from state_inside_frame
+ */
+static inline void
+async_bump(struct net_device *dev,
+	   struct net_device_stats *stats,
+	   iobuff_t *rx_buff)
+{
+	struct sk_buff *newskb;
+	struct sk_buff *dataskb;
+	int		docopy;
+
+	/* Check if we need to copy the data to a new skb or not.
+	 * If the driver doesn't use ZeroCopy Rx, we have to do it.
+	 * With ZeroCopy Rx, the rx_buff already point to a valid
+	 * skb. But, if the frame is small, it is more efficient to
+	 * copy it to save memory (copy will be fast anyway - that's
+	 * called Rx-copy-break). Jean II */
+	docopy = ((rx_buff->skb == NULL) ||
+		  (rx_buff->len < IRDA_RX_COPY_THRESHOLD));
+
+	/* Allocate a new skb */
+	newskb = dev_alloc_skb(docopy ? rx_buff->len + 1 : rx_buff->truesize);
+	if (!newskb)  {
+		stats->rx_dropped++;
+		/* We could deliver the current skb if doing ZeroCopy Rx,
+		 * but this would stall the Rx path. Better drop the
+		 * packet... Jean II */
+		return;
+	}
+
+	/* Align IP header to 20 bytes (i.e. increase skb->data)
+	 * Note this is only useful with IrLAN, as PPP has a variable
+	 * header size (2 or 1 bytes) - Jean II */
+	skb_reserve(newskb, 1);
+
+	if(docopy) {
+		/* Copy data without CRC (lenght already checked) */
+		memcpy(newskb->data, rx_buff->data, rx_buff->len - 2);
+		/* Deliver this skb */
+		dataskb = newskb;
+	} else {
+		/* We are using ZeroCopy. Deliver old skb */
+		dataskb = rx_buff->skb;
+		/* And hook the new skb to the rx_buff */
+		rx_buff->skb = newskb;
+		rx_buff->head = newskb->data;	/* NOT newskb->head */
+		//printk(KERN_DEBUG "ZeroCopy : len = %d, dataskb = %p, newskb = %p\n", rx_buff->len, dataskb, newskb);
+	}
+
+	/* Set proper length on skb (without CRC) */
+	skb_put(dataskb, rx_buff->len - 2);
+
+	/* Feed it to IrLAP layer */
+	dataskb->dev = dev;
+	dataskb->mac.raw  = dataskb->data;
+	dataskb->protocol = htons(ETH_P_IRDA);
+
+	netif_rx(dataskb);
+
+	stats->rx_packets++;
+	stats->rx_bytes += rx_buff->len;
+
+	/* Clean up rx_buff (redundant with async_unwrap_bof() ???) */
+	rx_buff->data = rx_buff->head;
+	rx_buff->len = 0;
+}
+
+/*
+ * Function async_unwrap_bof(dev, byte)
+ *
+ *    Handle Beginning Of Frame character received within a frame
+ *
+ */
+static inline void
+async_unwrap_bof(struct net_device *dev,
+		 struct net_device_stats *stats,
+		 iobuff_t *rx_buff, __u8 byte)
+{
+	switch(rx_buff->state) {
+	case LINK_ESCAPE:
+	case INSIDE_FRAME:
+		/* Not supposed to happen, the previous frame is not
+		 * finished - Jean II */
+		IRDA_DEBUG(1, "%s(), Discarding incomplete frame\n",
+			   __FUNCTION__);
+		stats->rx_errors++;
+		stats->rx_missed_errors++;
+		irda_device_set_media_busy(dev, TRUE);
+		break;
+
+	case OUTSIDE_FRAME:
+	case BEGIN_FRAME:
+	default:
+		/* We may receive multiple BOF at the start of frame */ 
+		break;
+	}
+
+	/* Now receiving frame */
+	rx_buff->state = BEGIN_FRAME;
+	rx_buff->in_frame = TRUE;
+
+	/* Time to initialize receive buffer */
+	rx_buff->data = rx_buff->head;
+	rx_buff->len = 0;
+	rx_buff->fcs = INIT_FCS;
+}
+
+/*
+ * Function async_unwrap_eof(dev, byte)
+ *
+ *    Handle End Of Frame character received within a frame
+ *
+ */
+static inline void
+async_unwrap_eof(struct net_device *dev,
+		 struct net_device_stats *stats,
+		 iobuff_t *rx_buff, __u8 byte)
+{
+#ifdef POSTPONE_RX_CRC
+	int	i;
+#endif
+
+	switch(rx_buff->state) {
+	case OUTSIDE_FRAME:
+		/* Probably missed the BOF */
+		stats->rx_errors++;
+		stats->rx_missed_errors++;
+		irda_device_set_media_busy(dev, TRUE);
+		break;
+
+	case BEGIN_FRAME:
+	case LINK_ESCAPE:
+	case INSIDE_FRAME:
+	default:
+		/* Note : in the case of BEGIN_FRAME and LINK_ESCAPE,
+		 * the fcs will most likely not match and generate an
+		 * error, as expected - Jean II */
+		rx_buff->state = OUTSIDE_FRAME;
+		rx_buff->in_frame = FALSE;
+
+#ifdef POSTPONE_RX_CRC
+		/* If we haven't done the CRC as we receive bytes, we
+		 * must do it now... Jean II */
+		for(i = 0; i < rx_buff->len; i++)
+			rx_buff->fcs = irda_fcs(rx_buff->fcs,
+						rx_buff->data[i]);
+#endif
+
+		/* Test FCS and signal success if the frame is good */
+		if (rx_buff->fcs == GOOD_FCS) {
+			/* Deliver frame */
+			async_bump(dev, stats, rx_buff);
+			break;
+		} else {
+			/* Wrong CRC, discard frame!  */
+			irda_device_set_media_busy(dev, TRUE);
+
+			IRDA_DEBUG(1, "%s(), crc error\n", __FUNCTION__);
+			stats->rx_errors++;
+			stats->rx_crc_errors++;
+		}
+		break;
+	}
+}
+
+/*
+ * Function async_unwrap_ce(dev, byte)
+ *
+ *    Handle Character Escape character received within a frame
+ *
+ */
+static inline void
+async_unwrap_ce(struct net_device *dev,
+		 struct net_device_stats *stats,
+		 iobuff_t *rx_buff, __u8 byte)
+{
+	switch(rx_buff->state) {
+	case OUTSIDE_FRAME:
+		/* Activate carrier sense */
+		irda_device_set_media_busy(dev, TRUE);
+		break;
+
+	case LINK_ESCAPE:
+		IRDA_WARNING("%s: state not defined\n", __FUNCTION__);
+		break;
+
+	case BEGIN_FRAME:
+	case INSIDE_FRAME:
+	default:
+		/* Stuffed byte coming */
+		rx_buff->state = LINK_ESCAPE;
+		break;
+	}
+}
+
+/*
+ * Function async_unwrap_other(dev, byte)
+ *
+ *    Handle other characters received within a frame
+ *
+ */
+static inline void
+async_unwrap_other(struct net_device *dev,
+		   struct net_device_stats *stats,
+		   iobuff_t *rx_buff, __u8 byte)
+{
+	switch(rx_buff->state) {
+		/* This is on the critical path, case are ordered by
+		 * probability (most frequent first) - Jean II */
+	case INSIDE_FRAME:
+		/* Must be the next byte of the frame */
+		if (rx_buff->len < rx_buff->truesize)  {
+			rx_buff->data[rx_buff->len++] = byte;
+#ifndef POSTPONE_RX_CRC
+			rx_buff->fcs = irda_fcs(rx_buff->fcs, byte);
+#endif
+		} else {
+			IRDA_DEBUG(1, "%s(), Rx buffer overflow, aborting\n",
+				   __FUNCTION__);
+			rx_buff->state = OUTSIDE_FRAME;
+		}
+		break;
+
+	case LINK_ESCAPE:
+		/*
+		 *  Stuffed char, complement bit 5 of byte
+		 *  following CE, IrLAP p.114
+		 */
+		byte ^= IRDA_TRANS;
+		if (rx_buff->len < rx_buff->truesize)  {
+			rx_buff->data[rx_buff->len++] = byte;
+#ifndef POSTPONE_RX_CRC
+			rx_buff->fcs = irda_fcs(rx_buff->fcs, byte);
+#endif
+			rx_buff->state = INSIDE_FRAME;
+		} else {
+			IRDA_DEBUG(1, "%s(), Rx buffer overflow, aborting\n",
+				   __FUNCTION__);
+			rx_buff->state = OUTSIDE_FRAME;
+		}
+		break;
+
+	case OUTSIDE_FRAME:
+		/* Activate carrier sense */
+		if(byte != XBOF)
+			irda_device_set_media_busy(dev, TRUE);
+		break;
+
+	case BEGIN_FRAME:
+	default:
+		rx_buff->data[rx_buff->len++] = byte;
+#ifndef POSTPONE_RX_CRC
+		rx_buff->fcs = irda_fcs(rx_buff->fcs, byte);
+#endif
+		rx_buff->state = INSIDE_FRAME;
+		break;
+	}
+}
+
+/*
+ * Function async_unwrap_char (dev, rx_buff, byte)
+ *
+ *    Parse and de-stuff frame received from the IrDA-port
+ *
+ * This is the main entry point for SIR drivers.
+ */
+void async_unwrap_char(struct net_device *dev,
+		       struct net_device_stats *stats,
+		       iobuff_t *rx_buff, __u8 byte)
+{
+	switch(byte) {
+	case CE:
+		async_unwrap_ce(dev, stats, rx_buff, byte);
+		break;
+	case BOF:
+		async_unwrap_bof(dev, stats, rx_buff, byte);
+		break;
+	case EOF:
+		async_unwrap_eof(dev, stats, rx_buff, byte);
+		break;
+	default:
+		async_unwrap_other(dev, stats, rx_buff, byte);
+		break;
+	}
+}
+EXPORT_SYMBOL(async_unwrap_char);
+