mac80211: share STA information with driver

This patch changes mac80211 to share some more data about
stations with drivers. Should help iwlwifi and ath9k when
 they get around to updating, and might also help with
implementing rate control algorithms without internals.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 22 insertions, 22 deletions

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 990a4b7f6bc..debf7834dbc 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -275,7 +275,7 @@ static void mesh_plink_timer(unsigned long data)
 		return;
 	}
 	mpl_dbg("Mesh plink timer for %s fired on state %d\n",
-			print_mac(mac, sta->addr), sta->plink_state);
+			print_mac(mac, sta->sta.addr), sta->plink_state);
 	reason = 0;
 	llid = sta->llid;
 	plid = sta->plid;
@@ -288,7 +288,7 @@ static void mesh_plink_timer(unsigned long data)
 		if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
 			u32 rand;
 			mpl_dbg("Mesh plink for %s (retry, timeout): %d %d\n",
-					print_mac(mac, sta->addr),
+					print_mac(mac, sta->sta.addr),
 					sta->plink_retries, sta->plink_timeout);
 			get_random_bytes(&rand, sizeof(u32));
 			sta->plink_timeout = sta->plink_timeout +
@@ -296,7 +296,7 @@ static void mesh_plink_timer(unsigned long data)
 			++sta->plink_retries;
 			mod_plink_timer(sta, sta->plink_timeout);
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
 					    0, 0);
 			break;
 		}
@@ -309,7 +309,7 @@ static void mesh_plink_timer(unsigned long data)
 		sta->plink_state = PLINK_HOLDING;
 		mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 		spin_unlock_bh(&sta->lock);
-		mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid, plid,
+		mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
 				    reason);
 		break;
 	case PLINK_HOLDING:
@@ -352,10 +352,10 @@ int mesh_plink_open(struct sta_info *sta)
 	mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 	spin_unlock_bh(&sta->lock);
 	mpl_dbg("Mesh plink: starting establishment with %s\n",
-		print_mac(mac, sta->addr));
+		print_mac(mac, sta->sta.addr));
 
 	return mesh_plink_frame_tx(sdata, PLINK_OPEN,
-				   sta->addr, llid, 0, 0);
+				   sta->sta.addr, llid, 0, 0);
 }
 
 void mesh_plink_block(struct sta_info *sta)
@@ -379,7 +379,7 @@ int mesh_plink_close(struct sta_info *sta)
 #endif
 
 	mpl_dbg("Mesh plink: closing link with %s\n",
-			print_mac(mac, sta->addr));
+			print_mac(mac, sta->sta.addr));
 	spin_lock_bh(&sta->lock);
 	sta->reason = cpu_to_le16(MESH_LINK_CANCELLED);
 	reason = sta->reason;
@@ -400,7 +400,7 @@ int mesh_plink_close(struct sta_info *sta)
 	llid = sta->llid;
 	plid = sta->plid;
 	spin_unlock_bh(&sta->lock);
-	mesh_plink_frame_tx(sta->sdata, PLINK_CLOSE, sta->addr, llid,
+	mesh_plink_frame_tx(sta->sdata, PLINK_CLOSE, sta->sta.addr, llid,
 			    plid, reason);
 	return 0;
 }
@@ -577,9 +577,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			sta->llid = llid;
 			mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
 					    0, 0);
-			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr,
+			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr,
 					    llid, plid, 0);
 			break;
 		default:
@@ -604,7 +604,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
 					    plid, reason);
 			break;
 		case OPN_ACPT:
@@ -613,7 +613,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			sta->plid = plid;
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
 					    plid, 0);
 			break;
 		case CNF_ACPT:
@@ -646,13 +646,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
 					    plid, reason);
 			break;
 		case OPN_ACPT:
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
 					    plid, 0);
 			break;
 		case CNF_ACPT:
@@ -661,7 +661,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_inc_estab_count(sdata);
 			spin_unlock_bh(&sta->lock);
 			mpl_dbg("Mesh plink with %s ESTABLISHED\n",
-					print_mac(mac, sta->addr));
+					print_mac(mac, sta->sta.addr));
 			break;
 		default:
 			spin_unlock_bh(&sta->lock);
@@ -685,7 +685,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
 					    plid, reason);
 			break;
 		case OPN_ACPT:
@@ -694,8 +694,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_inc_estab_count(sdata);
 			spin_unlock_bh(&sta->lock);
 			mpl_dbg("Mesh plink with %s ESTABLISHED\n",
-					print_mac(mac, sta->addr));
-			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+					print_mac(mac, sta->sta.addr));
+			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
 					    plid, 0);
 			break;
 		default:
@@ -714,13 +714,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			llid = sta->llid;
 			mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
 					    plid, reason);
 			break;
 		case OPN_ACPT:
 			llid = sta->llid;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->addr, llid,
+			mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
 					    plid, 0);
 			break;
 		default:
@@ -743,8 +743,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			llid = sta->llid;
 			reason = sta->reason;
 			spin_unlock_bh(&sta->lock);
-			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->addr, llid,
-					    plid, reason);
+			mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr,
+					    llid, plid, reason);
 			break;
 		default:
 			spin_unlock_bh(&sta->lock);