summaryrefslogtreecommitdiffstats
path: root/net/mac80211/mesh_sync.c
diff options
context:
space:
mode:
authorJohn W. Linville <linville@tuxdriver.com>2012-11-28 10:56:03 -0500
committerJohn W. Linville <linville@tuxdriver.com>2012-11-28 10:56:03 -0500
commit79d38f7d6cf545ff838dd5227869f3916d1d100d (patch)
tree859c8071aab68fd32f36ffb9ebc04cf12db6e5e0 /net/mac80211/mesh_sync.c
parent03f52a0a554210d5049eeed9f1bb29047dc807cb (diff)
parent0751f8654602e4255f0b9c17784d8100d5896010 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts: drivers/net/wireless/iwlwifi/pcie/tx.c
Diffstat (limited to 'net/mac80211/mesh_sync.c')
-rw-r--r--net/mac80211/mesh_sync.c46
1 files changed, 8 insertions, 38 deletions
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index 407c8705e10..0f40086cce1 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -43,7 +43,7 @@ struct sync_method {
static bool mesh_peer_tbtt_adjusting(struct ieee802_11_elems *ie)
{
return (ie->mesh_config->meshconf_cap &
- MESHCONF_CAPAB_TBTT_ADJUSTING) != 0;
+ IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING) != 0;
}
void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
@@ -116,43 +116,13 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
goto no_sync;
}
- if (rx_status->flag & RX_FLAG_MACTIME_MPDU && rx_status->mactime) {
- /*
- * The mactime is defined as the time the first data symbol
- * of the frame hits the PHY, and the timestamp of the beacon
- * is defined as "the time that the data symbol containing the
- * first bit of the timestamp is transmitted to the PHY plus
- * the transmitting STA's delays through its local PHY from the
- * MAC-PHY interface to its interface with the WM" (802.11
- * 11.1.2)
- *
- * T_r, in 13.13.2.2.2, is just defined as "the frame reception
- * time" but we unless we interpret that time to be the same
- * time of the beacon timestamp, the offset calculation will be
- * off. Below we adjust t_r to be "the time at which the first
- * symbol of the timestamp element in the beacon is received".
- * This correction depends on the rate.
- *
- * Based on similar code in ibss.c
- */
- int rate;
-
- if (rx_status->flag & RX_FLAG_HT) {
- /* TODO:
- * In principle there could be HT-beacons (Dual Beacon
- * HT Operation options), but for now ignore them and
- * just use the primary (i.e. non-HT) beacons for
- * synchronization.
- * */
- goto no_sync;
- } else
- rate = local->hw.wiphy->bands[rx_status->band]->
- bitrates[rx_status->rate_idx].bitrate;
-
- /* 24 bytes of header * 8 bits/byte *
- * 10*(100 Kbps)/Mbps / rate (100 Kbps)*/
- t_r = rx_status->mactime + (24 * 8 * 10 / rate);
- }
+ if (ieee80211_have_rx_timestamp(rx_status))
+ /* time when timestamp field was received */
+ t_r = ieee80211_calculate_rx_timestamp(local, rx_status,
+ 24 + 12 +
+ elems->total_len +
+ FCS_LEN,
+ 24);
/* Timing offset calculation (see 13.13.2.2.2) */
t_t = le64_to_cpu(mgmt->u.beacon.timestamp);