mac80211: make BA session handling independent of STA mode

The aggregation handling isn't dependent on anything related to our
STA-mode implementation, and doesn't need to depend on it for frame
processing. This patch moves the relevant code to ht.c and adds a
hook in rx.c. For now, the relevant action frames are only processed
in STA/IBSS modes, but that's now something we can easily change.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 340 deletions

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index c22dcd605e4..25f90f7ccf3 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -445,52 +445,6 @@ static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
 	ieee80211_sta_tx(sdata, skb, 0);
 }
 
-static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *da, u16 tid,
-					u8 dialog_token, u16 status, u16 policy,
-					u16 buf_size, u16 timeout)
-{
-	struct ieee80211_if_sta *ifsta = &sdata->u.sta;
-	struct ieee80211_local *local = sdata->local;
-	struct sk_buff *skb;
-	struct ieee80211_mgmt *mgmt;
-	u16 capab;
-
-	skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
-
-	if (!skb) {
-		printk(KERN_DEBUG "%s: failed to allocate buffer "
-		       "for addba resp frame\n", sdata->dev->name);
-		return;
-	}
-
-	skb_reserve(skb, local->hw.extra_tx_headroom);
-	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
-	memset(mgmt, 0, 24);
-	memcpy(mgmt->da, da, ETH_ALEN);
-	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == IEEE80211_IF_TYPE_AP)
-		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
-	else
-		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
-	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
-					  IEEE80211_STYPE_ACTION);
-
-	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_resp));
-	mgmt->u.action.category = WLAN_CATEGORY_BACK;
-	mgmt->u.action.u.addba_resp.action_code = WLAN_ACTION_ADDBA_RESP;
-	mgmt->u.action.u.addba_resp.dialog_token = dialog_token;
-
-	capab = (u16)(policy << 1);	/* bit 1 aggregation policy */
-	capab |= (u16)(tid << 2); 	/* bit 5:2 TID number */
-	capab |= (u16)(buf_size << 6);	/* bit 15:6 max size of aggregation */
-
-	mgmt->u.action.u.addba_resp.capab = cpu_to_le16(capab);
-	mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout);
-	mgmt->u.action.u.addba_resp.status = cpu_to_le16(status);
-
-	ieee80211_sta_tx(sdata, skb, 0);
-}
-
 static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata,
 					struct ieee80211_msrment_ie *request_ie,
 					const u8 *da, const u8 *bssid,
@@ -1057,278 +1011,6 @@ static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
 			    elems.challenge_len + 2, 1);
 }
 
-/*
- * After accepting the AddBA Request we activated a timer,
- * resetting it after each frame that arrives from the originator.
- * if this timer expires ieee80211_sta_stop_rx_ba_session will be executed.
- */
-static void sta_rx_agg_session_timer_expired(unsigned long data)
-{
-	/* not an elegant detour, but there is no choice as the timer passes
-	 * only one argument, and various sta_info are needed here, so init
-	 * flow in sta_info_create gives the TID as data, while the timer_to_id
-	 * array gives the sta through container_of */
-	u8 *ptid = (u8 *)data;
-	u8 *timer_to_id = ptid - *ptid;
-	struct sta_info *sta = container_of(timer_to_id, struct sta_info,
-					 timer_to_tid[0]);
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
-	printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
-#endif
-	ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->addr,
-					 (u16)*ptid, WLAN_BACK_TIMER,
-					 WLAN_REASON_QSTA_TIMEOUT);
-}
-
-static void ieee80211_sta_process_addba_request(struct ieee80211_local *local,
-						struct ieee80211_mgmt *mgmt,
-						size_t len)
-{
-	struct ieee80211_hw *hw = &local->hw;
-	struct ieee80211_conf *conf = &hw->conf;
-	struct sta_info *sta;
-	struct tid_ampdu_rx *tid_agg_rx;
-	u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status;
-	u8 dialog_token;
-	int ret = -EOPNOTSUPP;
-	DECLARE_MAC_BUF(mac);
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, mgmt->sa);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-
-	/* extract session parameters from addba request frame */
-	dialog_token = mgmt->u.action.u.addba_req.dialog_token;
-	timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
-	start_seq_num =
-		le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4;
-
-	capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
-	ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
-	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
-	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
-
-	status = WLAN_STATUS_REQUEST_DECLINED;
-
-	/* sanity check for incoming parameters:
-	 * check if configuration can support the BA policy
-	 * and if buffer size does not exceeds max value */
-	if (((ba_policy != 1)
-		&& (!(conf->ht_conf.cap & IEEE80211_HT_CAP_DELAY_BA)))
-		|| (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
-		status = WLAN_STATUS_INVALID_QOS_PARAM;
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		if (net_ratelimit())
-			printk(KERN_DEBUG "AddBA Req with bad params from "
-				"%s on tid %u. policy %d, buffer size %d\n",
-				print_mac(mac, mgmt->sa), tid, ba_policy,
-				buf_size);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-		goto end_no_lock;
-	}
-	/* determine default buffer size */
-	if (buf_size == 0) {
-		struct ieee80211_supported_band *sband;
-
-		sband = local->hw.wiphy->bands[conf->channel->band];
-		buf_size = IEEE80211_MIN_AMPDU_BUF;
-		buf_size = buf_size << sband->ht_info.ampdu_factor;
-	}
-
-
-	/* examine state machine */
-	spin_lock_bh(&sta->lock);
-
-	if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_IDLE) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		if (net_ratelimit())
-			printk(KERN_DEBUG "unexpected AddBA Req from "
-				"%s on tid %u\n",
-				print_mac(mac, mgmt->sa), tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-		goto end;
-	}
-
-	/* prepare A-MPDU MLME for Rx aggregation */
-	sta->ampdu_mlme.tid_rx[tid] =
-			kmalloc(sizeof(struct tid_ampdu_rx), GFP_ATOMIC);
-	if (!sta->ampdu_mlme.tid_rx[tid]) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		if (net_ratelimit())
-			printk(KERN_ERR "allocate rx mlme to tid %d failed\n",
-					tid);
-#endif
-		goto end;
-	}
-	/* rx timer */
-	sta->ampdu_mlme.tid_rx[tid]->session_timer.function =
-				sta_rx_agg_session_timer_expired;
-	sta->ampdu_mlme.tid_rx[tid]->session_timer.data =
-				(unsigned long)&sta->timer_to_tid[tid];
-	init_timer(&sta->ampdu_mlme.tid_rx[tid]->session_timer);
-
-	tid_agg_rx = sta->ampdu_mlme.tid_rx[tid];
-
-	/* prepare reordering buffer */
-	tid_agg_rx->reorder_buf =
-		kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
-	if (!tid_agg_rx->reorder_buf) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		if (net_ratelimit())
-			printk(KERN_ERR "can not allocate reordering buffer "
-			       "to tid %d\n", tid);
-#endif
-		kfree(sta->ampdu_mlme.tid_rx[tid]);
-		goto end;
-	}
-	memset(tid_agg_rx->reorder_buf, 0,
-		buf_size * sizeof(struct sk_buff *));
-
-	if (local->ops->ampdu_action)
-		ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
-					       sta->addr, tid, &start_seq_num);
-#ifdef CONFIG_MAC80211_HT_DEBUG
-	printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
-	if (ret) {
-		kfree(tid_agg_rx->reorder_buf);
-		kfree(tid_agg_rx);
-		sta->ampdu_mlme.tid_rx[tid] = NULL;
-		goto end;
-	}
-
-	/* change state and send addba resp */
-	sta->ampdu_mlme.tid_state_rx[tid] = HT_AGG_STATE_OPERATIONAL;
-	tid_agg_rx->dialog_token = dialog_token;
-	tid_agg_rx->ssn = start_seq_num;
-	tid_agg_rx->head_seq_num = start_seq_num;
-	tid_agg_rx->buf_size = buf_size;
-	tid_agg_rx->timeout = timeout;
-	tid_agg_rx->stored_mpdu_num = 0;
-	status = WLAN_STATUS_SUCCESS;
-end:
-	spin_unlock_bh(&sta->lock);
-
-end_no_lock:
-	ieee80211_send_addba_resp(sta->sdata, sta->addr, tid,
-				  dialog_token, status, 1, buf_size, timeout);
-	rcu_read_unlock();
-}
-
-static void ieee80211_sta_process_addba_resp(struct ieee80211_local *local,
-					     struct ieee80211_mgmt *mgmt,
-					     size_t len)
-{
-	struct ieee80211_hw *hw = &local->hw;
-	struct sta_info *sta;
-	u16 capab;
-	u16 tid;
-	u8 *state;
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, mgmt->sa);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-
-	capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
-	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
-
-	state = &sta->ampdu_mlme.tid_state_tx[tid];
-
-	spin_lock_bh(&sta->lock);
-
-	if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
-		spin_unlock_bh(&sta->lock);
-		goto addba_resp_exit;
-	}
-
-	if (mgmt->u.action.u.addba_resp.dialog_token !=
-		sta->ampdu_mlme.tid_tx[tid]->dialog_token) {
-		spin_unlock_bh(&sta->lock);
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-		goto addba_resp_exit;
-	}
-
-	del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
-#ifdef CONFIG_MAC80211_HT_DEBUG
-	printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-	if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
-			== WLAN_STATUS_SUCCESS) {
-		*state |= HT_ADDBA_RECEIVED_MSK;
-		sta->ampdu_mlme.addba_req_num[tid] = 0;
-
-		if (*state == HT_AGG_STATE_OPERATIONAL)
-			ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
-
-		spin_unlock_bh(&sta->lock);
-	} else {
-		sta->ampdu_mlme.addba_req_num[tid]++;
-		/* this will allow the state check in stop_BA_session */
-		*state = HT_AGG_STATE_OPERATIONAL;
-		spin_unlock_bh(&sta->lock);
-		ieee80211_stop_tx_ba_session(hw, sta->addr, tid,
-					     WLAN_BACK_INITIATOR);
-	}
-
-addba_resp_exit:
-	rcu_read_unlock();
-}
-
-static void ieee80211_sta_process_delba(struct ieee80211_sub_if_data *sdata,
-			struct ieee80211_mgmt *mgmt, size_t len)
-{
-	struct ieee80211_local *local = sdata->local;
-	struct sta_info *sta;
-	u16 tid, params;
-	u16 initiator;
-	DECLARE_MAC_BUF(mac);
-
-	rcu_read_lock();
-
-	sta = sta_info_get(local, mgmt->sa);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-
-	params = le16_to_cpu(mgmt->u.action.u.delba.params);
-	tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
-	initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
-	if (net_ratelimit())
-		printk(KERN_DEBUG "delba from %s (%s) tid %d reason code %d\n",
-			print_mac(mac, mgmt->sa),
-			initiator ? "initiator" : "recipient", tid,
-			mgmt->u.action.u.delba.reason_code);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
-	if (initiator == WLAN_BACK_INITIATOR)
-		ieee80211_sta_stop_rx_ba_session(sdata, sta->addr, tid,
-						 WLAN_BACK_INITIATOR, 0);
-	else { /* WLAN_BACK_RECIPIENT */
-		spin_lock_bh(&sta->lock);
-		sta->ampdu_mlme.tid_state_tx[tid] =
-				HT_AGG_STATE_OPERATIONAL;
-		spin_unlock_bh(&sta->lock);
-		ieee80211_stop_tx_ba_session(&local->hw, sta->addr, tid,
-					     WLAN_BACK_RECIPIENT);
-	}
-	rcu_read_unlock();
-}
-
 static void ieee80211_sta_process_measurement_req(struct ieee80211_sub_if_data *sdata,
 						struct ieee80211_mgmt *mgmt,
 						size_t len)
@@ -2207,28 +1889,6 @@ static void ieee80211_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
 			break;
 		}
 		break;
-	case WLAN_CATEGORY_BACK:
-		switch (mgmt->u.action.u.addba_req.action_code) {
-		case WLAN_ACTION_ADDBA_REQ:
-			if (len < (IEEE80211_MIN_ACTION_SIZE +
-				   sizeof(mgmt->u.action.u.addba_req)))
-				break;
-			ieee80211_sta_process_addba_request(local, mgmt, len);
-			break;
-		case WLAN_ACTION_ADDBA_RESP:
-			if (len < (IEEE80211_MIN_ACTION_SIZE +
-				   sizeof(mgmt->u.action.u.addba_resp)))
-				break;
-			ieee80211_sta_process_addba_resp(local, mgmt, len);
-			break;
-		case WLAN_ACTION_DELBA:
-			if (len < (IEEE80211_MIN_ACTION_SIZE +
-				   sizeof(mgmt->u.action.u.delba)))
-				break;
-			ieee80211_sta_process_delba(sdata, mgmt, len);
-			break;
-		}
-		break;
 	case PLINK_CATEGORY:
 		if (ieee80211_vif_is_mesh(&sdata->vif))
 			mesh_rx_plink_frame(sdata, mgmt, len, rx_status);