Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

1 files changed, 0 insertions, 152 deletions

diff --git a/net/mac80211/regdomain.c b/net/mac80211/regdomain.c
deleted file mode 100644
index f42678fa62d..00000000000
--- a/net/mac80211/regdomain.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Copyright 2002-2005, Instant802 Networks, Inc.
- * Copyright 2005-2006, Devicescape Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * This regulatory domain control implementation is known to be incomplete
- * and confusing. mac80211 regulatory domain control will be significantly
- * reworked in the not-too-distant future.
- *
- * For now, drivers wishing to control which channels are and aren't available
- * are advised as follows:
- *  - set the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag
- *  - continue to include *ALL* possible channels in the modes registered
- *    through ieee80211_register_hwmode()
- *  - for each allowable ieee80211_channel structure registered in the above
- *    call, set the flag member to some meaningful value such as
- *    IEEE80211_CHAN_W_SCAN | IEEE80211_CHAN_W_ACTIVE_SCAN |
- *    IEEE80211_CHAN_W_IBSS.
- *  - leave flag as 0 for non-allowable channels
- *
- * The usual implementation is for a driver to read a device EEPROM to
- * determine which regulatory domain it should be operating under, then
- * looking up the allowable channels in a driver-local table, then performing
- * the above.
- */
-
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include "ieee80211_i.h"
-
-static int ieee80211_regdom = 0x10; /* FCC */
-module_param(ieee80211_regdom, int, 0444);
-MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK");
-
-/*
- * If firmware is upgraded by the vendor, additional channels can be used based
- * on the new Japanese regulatory rules. This is indicated by setting
- * ieee80211_japan_5ghz module parameter to one when loading the 80211 kernel
- * module.
- */
-static int ieee80211_japan_5ghz /* = 0 */;
-module_param(ieee80211_japan_5ghz, int, 0444);
-MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz");
-
-
-struct ieee80211_channel_range {
-	short start_freq;
-	short end_freq;
-	unsigned char power_level;
-	unsigned char antenna_max;
-};
-
-static const struct ieee80211_channel_range ieee80211_fcc_channels[] = {
-	{ 2412, 2462, 27, 6 } /* IEEE 802.11b/g, channels 1..11 */,
-	{ 5180, 5240, 17, 6 } /* IEEE 802.11a, channels 36..48 */,
-	{ 5260, 5320, 23, 6 } /* IEEE 802.11a, channels 52..64 */,
-	{ 5745, 5825, 30, 6 } /* IEEE 802.11a, channels 149..165, outdoor */,
-	{ 0 }
-};
-
-static const struct ieee80211_channel_range ieee80211_mkk_channels[] = {
-	{ 2412, 2472, 20, 6 } /* IEEE 802.11b/g, channels 1..13 */,
-	{ 5170, 5240, 20, 6 } /* IEEE 802.11a, channels 34..48 */,
-	{ 5260, 5320, 20, 6 } /* IEEE 802.11a, channels 52..64 */,
-	{ 0 }
-};
-
-
-static const struct ieee80211_channel_range *channel_range =
-	ieee80211_fcc_channels;
-
-
-static void ieee80211_unmask_channel(int mode, struct ieee80211_channel *chan)
-{
-	int i;
-
-	chan->flag = 0;
-
-	for (i = 0; channel_range[i].start_freq; i++) {
-		const struct ieee80211_channel_range *r = &channel_range[i];
-		if (r->start_freq <= chan->freq && r->end_freq >= chan->freq) {
-			if (ieee80211_regdom == 64 && !ieee80211_japan_5ghz &&
-			    chan->freq >= 5260 && chan->freq <= 5320) {
-				/*
-				 * Skip new channels in Japan since the
-				 * firmware was not marked having been upgraded
-				 * by the vendor.
-				 */
-				continue;
-			}
-
-			if (ieee80211_regdom == 0x10 &&
-			    (chan->freq == 5190 || chan->freq == 5210 ||
-			     chan->freq == 5230)) {
-				    /* Skip MKK channels when in FCC domain. */
-				    continue;
-			}
-
-			chan->flag |= IEEE80211_CHAN_W_SCAN |
-				IEEE80211_CHAN_W_ACTIVE_SCAN |
-				IEEE80211_CHAN_W_IBSS;
-			chan->power_level = r->power_level;
-			chan->antenna_max = r->antenna_max;
-
-			if (ieee80211_regdom == 64 &&
-			    (chan->freq == 5170 || chan->freq == 5190 ||
-			     chan->freq == 5210 || chan->freq == 5230)) {
-				/*
-				 * New regulatory rules in Japan have backwards
-				 * compatibility with old channels in 5.15-5.25
-				 * GHz band, but the station is not allowed to
-				 * use active scan on these old channels.
-				 */
-				chan->flag &= ~IEEE80211_CHAN_W_ACTIVE_SCAN;
-			}
-
-			if (ieee80211_regdom == 64 &&
-			    (chan->freq == 5260 || chan->freq == 5280 ||
-			     chan->freq == 5300 || chan->freq == 5320)) {
-				/*
-				 * IBSS is not allowed on 5.25-5.35 GHz band
-				 * due to radar detection requirements.
-				 */
-				chan->flag &= ~IEEE80211_CHAN_W_IBSS;
-			}
-
-			break;
-		}
-	}
-}
-
-
-void ieee80211_set_default_regdomain(struct ieee80211_hw_mode *mode)
-{
-	int c;
-	for (c = 0; c < mode->num_channels; c++)
-		ieee80211_unmask_channel(mode->mode, &mode->channels[c]);
-}
-
-
-void ieee80211_regdomain_init(void)
-{
-	if (ieee80211_regdom == 0x40)
-		channel_range = ieee80211_mkk_channels;
-}
-