Merge tag 'arizona-extcon-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next

Mark writes:

	ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs

	This patch series covers both ASoC and extcon subsystems and fixes an
	interaction between the HPDET function and the headphone outputs - we
	really shouldn't run HPDET while the headphone is active.  The first
	patch is a refactoring to make the extcon side easier.

4 files changed, 44 insertions, 14 deletions

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 808f5fcd1ce..fb306814576 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -3290,14 +3290,19 @@ static int ieee80211_cfg_get_channel(struct wiphy *wiphy,
 	int ret = -ENODATA;
 
 	rcu_read_lock();
-	if (local->use_chanctx) {
-		chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
-		if (chanctx_conf) {
-			*chandef = chanctx_conf->def;
-			ret = 0;
-		}
-	} else if (local->open_count == local->monitors) {
-		*chandef = local->monitor_chandef;
+	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+	if (chanctx_conf) {
+		*chandef = chanctx_conf->def;
+		ret = 0;
+	} else if (local->open_count > 0 &&
+		   local->open_count == local->monitors &&
+		   sdata->vif.type == NL80211_IFTYPE_MONITOR) {
+		if (local->use_chanctx)
+			*chandef = local->monitor_chandef;
+		else
+			cfg80211_chandef_create(chandef,
+						local->_oper_channel,
+						local->_oper_channel_type);
 		ret = 0;
 	}
 	rcu_read_unlock();
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 640afab304d..baaa8608e52 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -541,6 +541,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
 
 		ieee80211_adjust_monitor_flags(sdata, 1);
 		ieee80211_configure_filter(local);
+		mutex_lock(&local->mtx);
+		ieee80211_recalc_idle(local);
+		mutex_unlock(&local->mtx);
 
 		netif_carrier_on(dev);
 		break;
@@ -812,6 +815,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 
 		ieee80211_adjust_monitor_flags(sdata, -1);
 		ieee80211_configure_filter(local);
+		mutex_lock(&local->mtx);
+		ieee80211_recalc_idle(local);
+		mutex_unlock(&local->mtx);
 		break;
 	case NL80211_IFTYPE_P2P_DEVICE:
 		/* relies on synchronize_rcu() below */
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9f6464f3e05..141577412d8 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -647,6 +647,9 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
 		our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) &
 								mask) >> shift;
 
+		if (our_mcs == IEEE80211_VHT_MCS_NOT_SUPPORTED)
+			continue;
+
 		switch (ap_mcs) {
 		default:
 			if (our_mcs <= ap_mcs)
@@ -3503,6 +3506,14 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
 	/*
+	 * Stop timers before deleting work items, as timers
+	 * could race and re-add the work-items. They will be
+	 * re-established on connection.
+	 */
+	del_timer_sync(&ifmgd->conn_mon_timer);
+	del_timer_sync(&ifmgd->bcn_mon_timer);
+
+	/*
 	 * we need to use atomic bitops for the running bits
 	 * only because both timers might fire at the same
 	 * time -- the code here is properly synchronised.
@@ -3516,13 +3527,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->chswitch_work);
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
-	/* these will just be re-established on connection */
-	del_timer_sync(&ifmgd->conn_mon_timer);
-	del_timer_sync(&ifmgd->bcn_mon_timer);
+	cancel_work_sync(&ifmgd->chswitch_work);
 }
 
 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
@@ -4315,6 +4322,17 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/*
+	 * Make sure some work items will not run after this,
+	 * they will not do anything but might not have been
+	 * cancelled when disconnecting.
+	 */
+	cancel_work_sync(&ifmgd->monitor_work);
+	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+	cancel_work_sync(&ifmgd->request_smps_work);
+	cancel_work_sync(&ifmgd->csa_connection_drop_work);
+	cancel_work_sync(&ifmgd->chswitch_work);
+
 	mutex_lock(&ifmgd->mtx);
 	if (ifmgd->assoc_data)
 		ieee80211_destroy_assoc_data(sdata, false);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index ce78d1149f1..8914d2d2881 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2745,7 +2745,8 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw,
 				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
 		}
 
-		sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev);
 		if (!ieee80211_tx_prepare(sdata, &tx, skb))
 			break;
 		dev_kfree_skb_any(skb);