Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

5 files changed, 341 insertions, 298 deletions

diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index b8fef1d1136..ee94ea0c67e 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -131,17 +131,35 @@ TRACE_EVENT(drv_config,
 		LOCAL_ENTRY
 		__field(u32, changed)
 		__field(int, ret)
+		__field(u32, flags)
+		__field(int, power_level)
+		__field(int, dynamic_ps_timeout)
+		__field(int, max_sleep_period)
+		__field(u16, listen_interval)
+		__field(u8, long_frame_max_tx_count)
+		__field(u8, short_frame_max_tx_count)
+		__field(int, center_freq)
+		__field(int, channel_type)
 	),
 
 	TP_fast_assign(
 		LOCAL_ASSIGN;
 		__entry->changed = changed;
 		__entry->ret = ret;
+		__entry->flags = local->hw.conf.flags;
+		__entry->power_level = local->hw.conf.power_level;
+		__entry->dynamic_ps_timeout = local->hw.conf.dynamic_ps_timeout;
+		__entry->max_sleep_period = local->hw.conf.max_sleep_period;
+		__entry->listen_interval = local->hw.conf.listen_interval;
+		__entry->long_frame_max_tx_count = local->hw.conf.long_frame_max_tx_count;
+		__entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count;
+		__entry->center_freq = local->hw.conf.channel->center_freq;
+		__entry->channel_type = local->hw.conf.channel_type;
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT " ch:%#x ret:%d",
-		LOCAL_PR_ARG, __entry->changed, __entry->ret
+		LOCAL_PR_FMT " ch:%#x freq:%d ret:%d",
+		LOCAL_PR_ARG, __entry->changed, __entry->center_freq, __entry->ret
 	)
 );
 
@@ -167,6 +185,8 @@ TRACE_EVENT(drv_bss_info_changed,
 		__field(u64, timestamp)
 		__field(u32, basic_rates)
 		__field(u32, changed)
+		__field(bool, enable_beacon)
+		__field(u16, ht_operation_mode)
 	),
 
 	TP_fast_assign(
@@ -183,6 +203,8 @@ TRACE_EVENT(drv_bss_info_changed,
 		__entry->assoc_cap = info->assoc_capability;
 		__entry->timestamp = info->timestamp;
 		__entry->basic_rates = info->basic_rates;
+		__entry->enable_beacon = info->enable_beacon;
+		__entry->ht_operation_mode = info->ht_operation_mode;
 	),
 
 	TP_printk(
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 039affa7c87..419f186cfcf 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -163,8 +163,8 @@ typedef unsigned __bitwise__ ieee80211_rx_result;
 /* frame is destined to interface currently processed (incl. multicast frames) */
 #define IEEE80211_RX_RA_MATCH		BIT(1)
 #define IEEE80211_RX_AMSDU		BIT(2)
-#define IEEE80211_RX_CMNTR_REPORTED	BIT(3)
-#define IEEE80211_RX_FRAGMENTED		BIT(4)
+#define IEEE80211_RX_FRAGMENTED		BIT(3)
+/* only add flags here that do not change with subframes of an aMPDU */
 
 struct ieee80211_rx_data {
 	struct sk_buff *skb;
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 1bf12a26b45..80c16f6e2af 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -860,22 +860,18 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
 void ieee80211_remove_interfaces(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata, *tmp;
+	LIST_HEAD(unreg_list);
 
 	ASSERT_RTNL();
 
+	mutex_lock(&local->iflist_mtx);
 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
-		/*
-		 * we cannot hold the iflist_mtx across unregister_netdevice,
-		 * but we only need to hold it for list modifications to lock
-		 * out readers since we're under the RTNL here as all other
-		 * writers.
-		 */
-		mutex_lock(&local->iflist_mtx);
 		list_del(&sdata->list);
-		mutex_unlock(&local->iflist_mtx);
 
-		unregister_netdevice(sdata->dev);
+		unregister_netdevice_queue(sdata->dev, &unreg_list);
 	}
+	mutex_unlock(&local->iflist_mtx);
+	unregister_netdevice_many(&unreg_list);
 }
 
 static u32 ieee80211_idle_off(struct ieee80211_local *local,
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index beecf50fbd1..4ed60ae81b9 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -27,10 +27,6 @@
 #include "tkip.h"
 #include "wme.h"
 
-static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
-					     struct tid_ampdu_rx *tid_agg_rx,
-					     u16 head_seq_num);
-
 /*
  * monitor mode reception
  *
@@ -534,6 +530,242 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx)
 	return RX_CONTINUE;
 }
 
+#define SEQ_MODULO 0x1000
+#define SEQ_MASK   0xfff
+
+static inline int seq_less(u16 sq1, u16 sq2)
+{
+	return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
+}
+
+static inline u16 seq_inc(u16 sq)
+{
+	return (sq + 1) & SEQ_MASK;
+}
+
+static inline u16 seq_sub(u16 sq1, u16 sq2)
+{
+	return (sq1 - sq2) & SEQ_MASK;
+}
+
+
+static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
+					    struct tid_ampdu_rx *tid_agg_rx,
+					    int index,
+					    struct sk_buff_head *frames)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *rate = NULL;
+	struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
+	struct ieee80211_rx_status *status;
+
+	if (!skb)
+		goto no_frame;
+
+	status = IEEE80211_SKB_RXCB(skb);
+
+	/* release the reordered frames to stack */
+	sband = hw->wiphy->bands[status->band];
+	if (!(status->flag & RX_FLAG_HT))
+		rate = &sband->bitrates[status->rate_idx];
+	tid_agg_rx->stored_mpdu_num--;
+	tid_agg_rx->reorder_buf[index] = NULL;
+	skb_queue_tail(frames, skb);
+
+no_frame:
+	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+}
+
+static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
+					     struct tid_ampdu_rx *tid_agg_rx,
+					     u16 head_seq_num,
+					     struct sk_buff_head *frames)
+{
+	int index;
+
+	while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
+		index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+							tid_agg_rx->buf_size;
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+	}
+}
+
+/*
+ * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
+ * the skb was added to the buffer longer than this time ago, the earlier
+ * frames that have not yet been received are assumed to be lost and the skb
+ * can be released for processing. This may also release other skb's from the
+ * reorder buffer if there are no additional gaps between the frames.
+ */
+#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
+
+/*
+ * As this function belongs to the RX path it must be under
+ * rcu_read_lock protection. It returns false if the frame
+ * can be processed immediately, true if it was consumed.
+ */
+static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
+					     struct tid_ampdu_rx *tid_agg_rx,
+					     struct sk_buff *skb,
+					     struct sk_buff_head *frames)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	u16 sc = le16_to_cpu(hdr->seq_ctrl);
+	u16 mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
+	u16 head_seq_num, buf_size;
+	int index;
+
+	buf_size = tid_agg_rx->buf_size;
+	head_seq_num = tid_agg_rx->head_seq_num;
+
+	/* frame with out of date sequence number */
+	if (seq_less(mpdu_seq_num, head_seq_num)) {
+		dev_kfree_skb(skb);
+		return true;
+	}
+
+	/*
+	 * If frame the sequence number exceeds our buffering window
+	 * size release some previous frames to make room for this one.
+	 */
+	if (!seq_less(mpdu_seq_num, head_seq_num + buf_size)) {
+		head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size));
+		/* release stored frames up to new head to stack */
+		ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num,
+						 frames);
+	}
+
+	/* Now the new frame is always in the range of the reordering buffer */
+
+	index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size;
+
+	/* check if we already stored this frame */
+	if (tid_agg_rx->reorder_buf[index]) {
+		dev_kfree_skb(skb);
+		return true;
+	}
+
+	/*
+	 * If the current MPDU is in the right order and nothing else
+	 * is stored we can process it directly, no need to buffer it.
+	 */
+	if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
+	    tid_agg_rx->stored_mpdu_num == 0) {
+		tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+		return false;
+	}
+
+	/* put the frame in the reordering buffer */
+	tid_agg_rx->reorder_buf[index] = skb;
+	tid_agg_rx->reorder_time[index] = jiffies;
+	tid_agg_rx->stored_mpdu_num++;
+	/* release the buffer until next missing frame */
+	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+						tid_agg_rx->buf_size;
+	if (!tid_agg_rx->reorder_buf[index] &&
+	    tid_agg_rx->stored_mpdu_num > 1) {
+		/*
+		 * No buffers ready to be released, but check whether any
+		 * frames in the reorder buffer have timed out.
+		 */
+		int j;
+		int skipped = 1;
+		for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
+		     j = (j + 1) % tid_agg_rx->buf_size) {
+			if (!tid_agg_rx->reorder_buf[j]) {
+				skipped++;
+				continue;
+			}
+			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+					HT_RX_REORDER_BUF_TIMEOUT))
+				break;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+			if (net_ratelimit())
+				printk(KERN_DEBUG "%s: release an RX reorder "
+				       "frame due to timeout on earlier "
+				       "frames\n",
+				       wiphy_name(hw->wiphy));
+#endif
+			ieee80211_release_reorder_frame(hw, tid_agg_rx,
+							j, frames);
+
+			/*
+			 * Increment the head seq# also for the skipped slots.
+			 */
+			tid_agg_rx->head_seq_num =
+				(tid_agg_rx->head_seq_num + skipped) & SEQ_MASK;
+			skipped = 0;
+		}
+	} else while (tid_agg_rx->reorder_buf[index]) {
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+		index =	seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+							tid_agg_rx->buf_size;
+	}
+
+	return true;
+}
+
+/*
+ * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns
+ * true if the MPDU was buffered, false if it should be processed.
+ */
+static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx,
+				       struct sk_buff_head *frames)
+{
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_local *local = rx->local;
+	struct ieee80211_hw *hw = &local->hw;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct sta_info *sta = rx->sta;
+	struct tid_ampdu_rx *tid_agg_rx;
+	u16 sc;
+	int tid;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		goto dont_reorder;
+
+	/*
+	 * filter the QoS data rx stream according to
+	 * STA/TID and check if this STA/TID is on aggregation
+	 */
+
+	if (!sta)
+		goto dont_reorder;
+
+	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
+
+	if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL)
+		goto dont_reorder;
+
+	tid_agg_rx = sta->ampdu_mlme.tid_rx[tid];
+
+	/* qos null data frames are excluded */
+	if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC)))
+		goto dont_reorder;
+
+	/* new, potentially un-ordered, ampdu frame - process it */
+
+	/* reset session timer */
+	if (tid_agg_rx->timeout)
+		mod_timer(&tid_agg_rx->session_timer,
+			  TU_TO_EXP_TIME(tid_agg_rx->timeout));
+
+	/* if this mpdu is fragmented - terminate rx aggregation session */
+	sc = le16_to_cpu(hdr->seq_ctrl);
+	if (sc & IEEE80211_SCTL_FRAG) {
+		ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->sta.addr,
+			tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP);
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	if (ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, frames))
+		return;
+
+ dont_reorder:
+	__skb_queue_tail(frames, skb);
+}
 
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_check(struct ieee80211_rx_data *rx)
@@ -637,6 +869,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 	if (!(rx->flags & IEEE80211_RX_RA_MATCH))
 		return RX_CONTINUE;
 
+	/* start without a key */
+	rx->key = NULL;
+
 	if (rx->sta)
 		stakey = rcu_dereference(rx->sta->key);
 
@@ -1589,7 +1824,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 }
 
 static ieee80211_rx_result debug_noinline
-ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
+ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames)
 {
 	struct ieee80211_local *local = rx->local;
 	struct ieee80211_hw *hw = &local->hw;
@@ -1619,7 +1854,8 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
 				  TU_TO_EXP_TIME(tid_agg_rx->timeout));
 
 		/* release stored frames up to start of BAR */
-		ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num);
+		ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num,
+						 frames);
 		kfree_skb(skb);
 		return RX_QUEUED;
 	}
@@ -1868,7 +2104,7 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx,
 	struct net_device *prev_dev = NULL;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
-	if (rx->flags & IEEE80211_RX_CMNTR_REPORTED)
+	if (status->flag & RX_FLAG_INTERNAL_CMTR)
 		goto out_free_skb;
 
 	if (skb_headroom(skb) < sizeof(*rthdr) &&
@@ -1929,7 +2165,7 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx,
 	} else
 		goto out_free_skb;
 
-	rx->flags |= IEEE80211_RX_CMNTR_REPORTED;
+	status->flag |= RX_FLAG_INTERNAL_CMTR;
 	return;
 
  out_free_skb:
@@ -1942,8 +2178,11 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 					 struct sk_buff *skb,
 					 struct ieee80211_rate *rate)
 {
+	struct sk_buff_head reorder_release;
 	ieee80211_rx_result res = RX_DROP_MONITOR;
 
+	__skb_queue_head_init(&reorder_release);
+
 	rx->skb = skb;
 	rx->sdata = sdata;
 
@@ -1951,50 +2190,72 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 	do {				\
 		res = rxh(rx);		\
 		if (res != RX_CONTINUE)	\
-			goto rxh_done;  \
+			goto rxh_next;  \
 	} while (0);
 
+	/*
+	 * NB: the rxh_next label works even if we jump
+	 *     to it from here because then the list will
+	 *     be empty, which is a trivial check
+	 */
 	CALL_RXH(ieee80211_rx_h_passive_scan)
 	CALL_RXH(ieee80211_rx_h_check)
-	CALL_RXH(ieee80211_rx_h_decrypt)
-	CALL_RXH(ieee80211_rx_h_check_more_data)
-	CALL_RXH(ieee80211_rx_h_sta_process)
-	CALL_RXH(ieee80211_rx_h_defragment)
-	CALL_RXH(ieee80211_rx_h_ps_poll)
-	CALL_RXH(ieee80211_rx_h_michael_mic_verify)
-	/* must be after MMIC verify so header is counted in MPDU mic */
-	CALL_RXH(ieee80211_rx_h_remove_qos_control)
-	CALL_RXH(ieee80211_rx_h_amsdu)
+
+	ieee80211_rx_reorder_ampdu(rx, &reorder_release);
+
+	while ((skb = __skb_dequeue(&reorder_release))) {
+		/*
+		 * all the other fields are valid across frames
+		 * that belong to an aMPDU since they are on the
+		 * same TID from the same station
+		 */
+		rx->skb = skb;
+
+		CALL_RXH(ieee80211_rx_h_decrypt)
+		CALL_RXH(ieee80211_rx_h_check_more_data)
+		CALL_RXH(ieee80211_rx_h_sta_process)
+		CALL_RXH(ieee80211_rx_h_defragment)
+		CALL_RXH(ieee80211_rx_h_ps_poll)
+		CALL_RXH(ieee80211_rx_h_michael_mic_verify)
+		/* must be after MMIC verify so header is counted in MPDU mic */
+		CALL_RXH(ieee80211_rx_h_remove_qos_control)
+		CALL_RXH(ieee80211_rx_h_amsdu)
 #ifdef CONFIG_MAC80211_MESH
-	if (ieee80211_vif_is_mesh(&sdata->vif))
-		CALL_RXH(ieee80211_rx_h_mesh_fwding);
+		if (ieee80211_vif_is_mesh(&sdata->vif))
+			CALL_RXH(ieee80211_rx_h_mesh_fwding);
 #endif
-	CALL_RXH(ieee80211_rx_h_data)
-	CALL_RXH(ieee80211_rx_h_ctrl)
-	CALL_RXH(ieee80211_rx_h_action)
-	CALL_RXH(ieee80211_rx_h_mgmt)
+		CALL_RXH(ieee80211_rx_h_data)
+
+		/* special treatment -- needs the queue */
+		res = ieee80211_rx_h_ctrl(rx, &reorder_release);
+		if (res != RX_CONTINUE)
+			goto rxh_next;
+
+		CALL_RXH(ieee80211_rx_h_action)
+		CALL_RXH(ieee80211_rx_h_mgmt)
 
 #undef CALL_RXH
 
- rxh_done:
-	switch (res) {
-	case RX_DROP_MONITOR:
-		I802_DEBUG_INC(sdata->local->rx_handlers_drop);
-		if (rx->sta)
-			rx->sta->rx_dropped++;
-		/* fall through */
-	case RX_CONTINUE:
-		ieee80211_rx_cooked_monitor(rx, rate);
-		break;
-	case RX_DROP_UNUSABLE:
-		I802_DEBUG_INC(sdata->local->rx_handlers_drop);
-		if (rx->sta)
-			rx->sta->rx_dropped++;
-		dev_kfree_skb(rx->skb);
-		break;
-	case RX_QUEUED:
-		I802_DEBUG_INC(sdata->local->rx_handlers_queued);
-		break;
+ rxh_next:
+		switch (res) {
+		case RX_DROP_MONITOR:
+			I802_DEBUG_INC(sdata->local->rx_handlers_drop);
+			if (rx->sta)
+				rx->sta->rx_dropped++;
+			/* fall through */
+		case RX_CONTINUE:
+			ieee80211_rx_cooked_monitor(rx, rate);
+			break;
+		case RX_DROP_UNUSABLE:
+			I802_DEBUG_INC(sdata->local->rx_handlers_drop);
+			if (rx->sta)
+				rx->sta->rx_dropped++;
+			dev_kfree_skb(rx->skb);
+			break;
+		case RX_QUEUED:
+			I802_DEBUG_INC(sdata->local->rx_handlers_queued);
+			break;
+		}
 	}
 }
 
@@ -2187,233 +2448,6 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 		dev_kfree_skb(skb);
 }
 
-#define SEQ_MODULO 0x1000
-#define SEQ_MASK   0xfff
-
-static inline int seq_less(u16 sq1, u16 sq2)
-{
-	return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
-}
-
-static inline u16 seq_inc(u16 sq)
-{
-	return (sq + 1) & SEQ_MASK;
-}
-
-static inline u16 seq_sub(u16 sq1, u16 sq2)
-{
-	return (sq1 - sq2) & SEQ_MASK;
-}
-
-
-static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
-					    struct tid_ampdu_rx *tid_agg_rx,
-					    int index)
-{
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_rate *rate = NULL;
-	struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
-	struct ieee80211_rx_status *status;
-
-	if (!skb)
-		goto no_frame;
-
-	status = IEEE80211_SKB_RXCB(skb);
-
-	/* release the reordered frames to stack */
-	sband = hw->wiphy->bands[status->band];
-	if (!(status->flag & RX_FLAG_HT))
-		rate = &sband->bitrates[status->rate_idx];
-	__ieee80211_rx_handle_packet(hw, skb, rate);
-	tid_agg_rx->stored_mpdu_num--;
-	tid_agg_rx->reorder_buf[index] = NULL;
-
-no_frame:
-	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
-}
-
-static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
-					     struct tid_ampdu_rx *tid_agg_rx,
-					     u16 head_seq_num)
-{
-	int index;
-
-	while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
-		index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
-							tid_agg_rx->buf_size;
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
-	}
-}
-
-/*
- * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
- * the skb was added to the buffer longer than this time ago, the earlier
- * frames that have not yet been received are assumed to be lost and the skb
- * can be released for processing. This may also release other skb's from the
- * reorder buffer if there are no additional gaps between the frames.
- */
-#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
-
-/*
- * As this function belongs to the RX path it must be under
- * rcu_read_lock protection. It returns false if the frame
- * can be processed immediately, true if it was consumed.
- */
-static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
-					     struct tid_ampdu_rx *tid_agg_rx,
-					     struct sk_buff *skb)
-{
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	u16 sc = le16_to_cpu(hdr->seq_ctrl);
-	u16 mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
-	u16 head_seq_num, buf_size;
-	int index;
-
-	buf_size = tid_agg_rx->buf_size;
-	head_seq_num = tid_agg_rx->head_seq_num;
-
-	/* frame with out of date sequence number */
-	if (seq_less(mpdu_seq_num, head_seq_num)) {
-		dev_kfree_skb(skb);
-		return true;
-	}
-
-	/*
-	 * If frame the sequence number exceeds our buffering window
-	 * size release some previous frames to make room for this one.
-	 */
-	if (!seq_less(mpdu_seq_num, head_seq_num + buf_size)) {
-		head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size));
-		/* release stored frames up to new head to stack */
-		ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num);
-	}
-
-	/* Now the new frame is always in the range of the reordering buffer */
-
-	index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size;
-
-	/* check if we already stored this frame */
-	if (tid_agg_rx->reorder_buf[index]) {
-		dev_kfree_skb(skb);
-		return true;
-	}
-
-	/*
-	 * If the current MPDU is in the right order and nothing else
-	 * is stored we can process it directly, no need to buffer it.
-	 */
-	if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
-	    tid_agg_rx->stored_mpdu_num == 0) {
-		tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
-		return false;
-	}
-
-	/* put the frame in the reordering buffer */
-	tid_agg_rx->reorder_buf[index] = skb;
-	tid_agg_rx->reorder_time[index] = jiffies;
-	tid_agg_rx->stored_mpdu_num++;
-	/* release the buffer until next missing frame */
-	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
-						tid_agg_rx->buf_size;
-	if (!tid_agg_rx->reorder_buf[index] &&
-	    tid_agg_rx->stored_mpdu_num > 1) {
-		/*
-		 * No buffers ready to be released, but check whether any
-		 * frames in the reorder buffer have timed out.
-		 */
-		int j;
-		int skipped = 1;
-		for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
-		     j = (j + 1) % tid_agg_rx->buf_size) {
-			if (!tid_agg_rx->reorder_buf[j]) {
-				skipped++;
-				continue;
-			}
-			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
-					HT_RX_REORDER_BUF_TIMEOUT))
-				break;
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
-			if (net_ratelimit())
-				printk(KERN_DEBUG "%s: release an RX reorder "
-				       "frame due to timeout on earlier "
-				       "frames\n",
-				       wiphy_name(hw->wiphy));
-#endif
-			ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
-
-			/*
-			 * Increment the head seq# also for the skipped slots.
-			 */
-			tid_agg_rx->head_seq_num =
-				(tid_agg_rx->head_seq_num + skipped) & SEQ_MASK;
-			skipped = 0;
-		}
-	} else while (tid_agg_rx->reorder_buf[index]) {
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
-		index =	seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
-							tid_agg_rx->buf_size;
-	}
-
-	return true;
-}
-
-/*
- * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns
- * true if the MPDU was buffered, false if it should be processed.
- */
-static bool ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
-				       struct sk_buff *skb)
-{
-	struct ieee80211_hw *hw = &local->hw;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	struct sta_info *sta;
-	struct tid_ampdu_rx *tid_agg_rx;
-	u16 sc;
-	int tid;
-
-	if (!ieee80211_is_data_qos(hdr->frame_control))
-		return false;
-
-	/*
-	 * filter the QoS data rx stream according to
-	 * STA/TID and check if this STA/TID is on aggregation
-	 */
-
-	sta = sta_info_get(local, hdr->addr2);
-	if (!sta)
-		return false;
-
-	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
-
-	if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL)
-		return false;
-
-	tid_agg_rx = sta->ampdu_mlme.tid_rx[tid];
-
-	/* qos null data frames are excluded */
-	if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC)))
-		return false;
-
-	/* new, potentially un-ordered, ampdu frame - process it */
-
-	/* reset session timer */
-	if (tid_agg_rx->timeout)
-		mod_timer(&tid_agg_rx->session_timer,
-			  TU_TO_EXP_TIME(tid_agg_rx->timeout));
-
-	/* if this mpdu is fragmented - terminate rx aggregation session */
-	sc = le16_to_cpu(hdr->seq_ctrl);
-	if (sc & IEEE80211_SCTL_FRAG) {
-		ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->sta.addr,
-			tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP);
-		dev_kfree_skb(skb);
-		return true;
-	}
-
-	return ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb);
-}
-
 /*
  * This is the receive path handler. It is called by a low level driver when an
  * 802.11 MPDU is received from the hardware.
@@ -2495,20 +2529,7 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		return;
 	}
 
-	/*
-	 * In theory, the block ack reordering should happen after duplicate
-	 * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
-	 * the call to ieee80211_rx_reorder_ampdu() should really be moved to
-	 * happen as a new RX handler between ieee80211_rx_h_check and
-	 * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
-	 * the time being, the call can be here since RX reorder buf processing
-	 * will implicitly skip duplicates. We could, in theory at least,
-	 * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
-	 * frames from other than operational channel), but that should not
-	 * happen in normal networks.
-	 */
-	if (!ieee80211_rx_reorder_ampdu(local, skb))
-		__ieee80211_rx_handle_packet(hw, skb, rate);
+	__ieee80211_rx_handle_packet(hw, skb, rate);
 
 	rcu_read_unlock();
 
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 9f91fd8e6ef..d78f36c64c7 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -148,6 +148,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct net_device *prev_dev = NULL;
 	struct sta_info *sta;
 	int retry_count = -1, i;
+	bool injected;
 
 	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
 		/* the HW cannot have attempted that rate */
@@ -297,6 +298,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 	/* for now report the total retry_count */
 	rthdr->data_retries = retry_count;
 
+	/* Need to make a copy before skb->cb gets cleared */
+	injected = !!(info->flags & IEEE80211_TX_CTL_INJECTED);
+
 	/* XXX: is this sufficient for BPF? */
 	skb_set_mac_header(skb, 0);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -311,7 +315,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 				continue;
 
 			if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
-			    !(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+			    !injected &&
 			    (type == IEEE80211_FTYPE_DATA))
 				continue;