Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Missing cancel of work items in mac80211 MLME, from Ben Greear.

 2) Fix DMA mapping handling in iwlwifi by using coherent DMA for
    command headers, from Johannes Berg.

 3) Decrease the amount of pressure on the page allocator by using order
    1 pages less in iwlwifi, from Emmanuel Grumbach.

 4) Fix mesh PS broadcast OOPS in mac80211, from Marco Porsch.

 5) Don't forget to recalculate idle state in mac80211 monitor
    interface, from Felix Fietkau.

 6) Fix varargs in netfilter conntrack handler, from Joe Perches.

 7) Need to reset entire chip when command queue fills up in iwlwifi,
    from Emmanuel Grumbach.

 8) The TX antenna value must be valid when calibrations are performed
    in iwlwifi, fix from Dor Shaish.

 9) Don't generate netfilter audit log entries when audit is disabled,
    from Gao Feng.

10) Deal with DMA unit hang on e1000e during power state transitions,
    from Bruce Allan.

11) Remove BUILD_BUG_ON check from igb driver, from Alexander Duyck.

12) Fix lockdep warning on i2c handling of igb driver, from Carolyn
    Wyborny.

13) Fix several TTY handling issues in IRDA ircomm tty driver, from
    Peter Hurley.

14) Several QFQ packet scheduler fixes from Paolo Valente.

15) When VXLAN encapsulates on transmit, we have to reset the netfilter
    state.  From Zang MingJie.

16) Fix jiffie check in net_rx_action() so that we really cap the
    processing at 2HZ.  From Eric Dumazet.

17) Fix erroneous trigger of IP option space exhaustion, when routers
    are pre-specified and we are looking to see if we can insert a
    timestamp, we will have the space.  From David Ward.

18) Fix various issues in benet driver wrt waiting for firmware to
    finish POST after resets or errors.  From Gavin Shan and Sathya
    Perla.

19) Fix TX locking in SFC driver, from Ben Hutchings.

20) Like the VXLAN fix above, when we encap in a TUN device we have to
    reset the netfilter state.  This should fix several strange crashes
    reported by Dave Jones and others.  From Eric Dumazet.

21) Don't forget to clean up MAC address resources when shutting down a
    port in mlx4 driver, from Yan Burman.

22) Fix divide by zero in vmxnet3 driver, from Bhavesh Davda.

23) Fix device statistic regression in tg3 when the driver is using
    phylib, from Nithin Sujir.

24) Fix info leak in several netlink handlers, from Mathias Krause.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
  6lowpan: Fix endianness issue in is_addr_link_local().
  rrunner.c: fix possible memory leak in rr_init_one()
  dcbnl: fix various netlink info leaks
  rtnl: fix info leak on RTM_GETLINK request for VF devices
  bridge: fix mdb info leaks
  tg3: Update link_up flag for phylib devices
  ipv6: stop multicast forwarding to process interface scoped addresses
  bridging: fix rx_handlers return code
  netlabel: fix build problems when CONFIG_IPV6=n
  drivers/isdn: checkng length to be sure not memory overflow
  net/rds: zero last byte for strncpy
  bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario
  bnx2x: Fix intermittent long KR2 link up time
  macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.
  team: unsyc the devices addresses when port is removed
  bridge: add missing vid to br_mdb_get()
  Fix: sparse warning in inet_csk_prepare_forced_close
  afkey: fix a typo
  MAINTAINERS: Update qlcnic maintainers list
  netlabel: correctly list all the static label mappings
  ...

2 files changed, 26 insertions, 28 deletions

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 5ffff039b01..ea4155fe973 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -367,8 +367,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 	rdev->wiphy.rts_threshold = (u32) -1;
 	rdev->wiphy.coverage_class = 0;
 
-	rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH |
-			       NL80211_FEATURE_ADVERTISE_CHAN_LIMITS;
+	rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
 
 	return &rdev->wiphy;
 }
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e652d05ff71..d44ab216c0e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -557,18 +557,6 @@ static int nl80211_msg_put_channel(struct sk_buff *msg,
 	if ((chan->flags & IEEE80211_CHAN_RADAR) &&
 	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR))
 		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS))
-		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS))
-		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ))
-		goto nla_put_failure;
-	if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) &&
-	    nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ))
-		goto nla_put_failure;
 
 	if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
 			DBM_TO_MBM(chan->max_power)))
@@ -1310,15 +1298,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
 			dev->wiphy.max_acl_mac_addrs))
 		goto nla_put_failure;
 
-	if (dev->wiphy.extended_capabilities &&
-	    (nla_put(msg, NL80211_ATTR_EXT_CAPA,
-		     dev->wiphy.extended_capabilities_len,
-		     dev->wiphy.extended_capabilities) ||
-	     nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK,
-		     dev->wiphy.extended_capabilities_len,
-		     dev->wiphy.extended_capabilities_mask)))
-		goto nla_put_failure;
-
 	return genlmsg_end(msg, hdr);
 
  nla_put_failure:
@@ -1328,7 +1307,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag
 
 static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
 {
-	int idx = 0;
+	int idx = 0, ret;
 	int start = cb->args[0];
 	struct cfg80211_registered_device *dev;
 
@@ -1338,9 +1317,29 @@ static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
 			continue;
 		if (++idx <= start)
 			continue;
-		if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
-				       cb->nlh->nlmsg_seq, NLM_F_MULTI,
-				       dev) < 0) {
+		ret = nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).portid,
+					 cb->nlh->nlmsg_seq, NLM_F_MULTI,
+					 dev);
+		if (ret < 0) {
+			/*
+			 * If sending the wiphy data didn't fit (ENOBUFS or
+			 * EMSGSIZE returned), this SKB is still empty (so
+			 * it's not too big because another wiphy dataset is
+			 * already in the skb) and we've not tried to adjust
+			 * the dump allocation yet ... then adjust the alloc
+			 * size to be bigger, and return 1 but with the empty
+			 * skb. This results in an empty message being RX'ed
+			 * in userspace, but that is ignored.
+			 *
+			 * We can then retry with the larger buffer.
+			 */
+			if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
+			    !skb->len &&
+			    cb->min_dump_alloc < 4096) {
+				cb->min_dump_alloc = 4096;
+				mutex_unlock(&cfg80211_mutex);
+				return 1;
+			}
 			idx--;
 			break;
 		}
@@ -1357,7 +1356,7 @@ static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
 	struct sk_buff *msg;
 	struct cfg80211_registered_device *dev = info->user_ptr[0];
 
-	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	msg = nlmsg_new(4096, GFP_KERNEL);
 	if (!msg)
 		return -ENOMEM;