netlabel: Label incoming TCP connections correctly in SELinux

The current NetLabel/SELinux behavior for incoming TCP connections works but
only through a series of happy coincidences that rely on the limited nature of
standard CIPSO (only able to convey MLS attributes) and the write equality
imposed by the SELinux MLS constraints.  The problem is that network sockets
created as the result of an incoming TCP connection were not on-the-wire
labeled based on the security attributes of the parent socket but rather based
on the wire label of the remote peer.  The issue had to do with how IP options
were managed as part of the network stack and where the LSM hooks were in
relation to the code which set the IP options on these newly created child
sockets.  While NetLabel/SELinux did correctly set the socket's on-the-wire
label it was promptly cleared by the network stack and reset based on the IP
options of the remote peer.

This patch, in conjunction with a prior patch that adjusted the LSM hook
locations, works to set the correct on-the-wire label format for new incoming
connections through the security_inet_conn_request() hook.  Besides the
correct behavior there are many advantages to this change, the most significant
is that all of the NetLabel socket labeling code in SELinux now lives in hooks
which can return error codes to the core stack which allows us to finally get
ride of the selinux_netlbl_inode_permission() logic which greatly simplfies
the NetLabel/SELinux glue code.  In the process of developing this patch I
also ran into a small handful of AF_INET6 cleanliness issues that have been
fixed which should make the code safer and easier to extend in the future.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>

1 files changed, 53 insertions, 133 deletions

diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
index 350794ab9b4..2e984413c7b 100644
--- a/security/selinux/netlabel.c
+++ b/security/selinux/netlabel.c
@@ -100,41 +100,6 @@ static struct netlbl_lsm_secattr *selinux_netlbl_sock_genattr(struct sock *sk)
 }
 
 /**
- * selinux_netlbl_sock_setsid - Label a socket using the NetLabel mechanism
- * @sk: the socket to label
- *
- * Description:
- * Attempt to label a socket using the NetLabel mechanism.  Returns zero values
- * on success, negative values on failure.
- *
- */
-static int selinux_netlbl_sock_setsid(struct sock *sk)
-{
-	int rc;
-	struct sk_security_struct *sksec = sk->sk_security;
-	struct netlbl_lsm_secattr *secattr;
-
-	if (sksec->nlbl_state != NLBL_REQUIRE)
-		return 0;
-
-	secattr = selinux_netlbl_sock_genattr(sk);
-	if (secattr == NULL)
-		return -ENOMEM;
-	rc = netlbl_sock_setattr(sk, secattr);
-	switch (rc) {
-	case 0:
-		sksec->nlbl_state = NLBL_LABELED;
-		break;
-	case -EDESTADDRREQ:
-		sksec->nlbl_state = NLBL_REQSKB;
-		rc = 0;
-		break;
-	}
-
-	return rc;
-}
-
-/**
  * selinux_netlbl_cache_invalidate - Invalidate the NetLabel cache
  *
  * Description:
@@ -188,13 +153,9 @@ void selinux_netlbl_sk_security_free(struct sk_security_struct *ssec)
  * The caller is responsibile for all the NetLabel sk_security_struct locking.
  *
  */
-void selinux_netlbl_sk_security_reset(struct sk_security_struct *ssec,
-				      int family)
+void selinux_netlbl_sk_security_reset(struct sk_security_struct *ssec)
 {
-	if (family == PF_INET)
-		ssec->nlbl_state = NLBL_REQUIRE;
-	else
-		ssec->nlbl_state = NLBL_UNSET;
+	ssec->nlbl_state = NLBL_UNSET;
 }
 
 /**
@@ -281,127 +242,86 @@ skbuff_setsid_return:
 }
 
 /**
- * selinux_netlbl_inet_conn_established - Netlabel the newly accepted connection
- * @sk: the new connection
+ * selinux_netlbl_inet_conn_request - Label an incoming stream connection
+ * @req: incoming connection request socket
  *
  * Description:
- * A new connection has been established on @sk so make sure it is labeled
- * correctly with the NetLabel susbsystem.
+ * A new incoming connection request is represented by @req, we need to label
+ * the new request_sock here and the stack will ensure the on-the-wire label
+ * will get preserved when a full sock is created once the connection handshake
+ * is complete.  Returns zero on success, negative values on failure.
  *
  */
-void selinux_netlbl_inet_conn_established(struct sock *sk, u16 family)
+int selinux_netlbl_inet_conn_request(struct request_sock *req, u16 family)
 {
 	int rc;
-	struct sk_security_struct *sksec = sk->sk_security;
-	struct netlbl_lsm_secattr *secattr;
-	struct inet_sock *sk_inet = inet_sk(sk);
-	struct sockaddr_in addr;
-
-	if (sksec->nlbl_state != NLBL_REQUIRE)
-		return;
+	struct netlbl_lsm_secattr secattr;
 
-	secattr = selinux_netlbl_sock_genattr(sk);
-	if (secattr == NULL)
-		return;
+	if (family != PF_INET)
+		return 0;
 
-	rc = netlbl_sock_setattr(sk, secattr);
-	switch (rc) {
-	case 0:
-		sksec->nlbl_state = NLBL_LABELED;
-		break;
-	case -EDESTADDRREQ:
-		/* no PF_INET6 support yet because we don't support any IPv6
-		 * labeling protocols */
-		if (family != PF_INET) {
-			sksec->nlbl_state = NLBL_UNSET;
-			return;
-		}
-
-		addr.sin_family = family;
-		addr.sin_addr.s_addr = sk_inet->daddr;
-		if (netlbl_conn_setattr(sk, (struct sockaddr *)&addr,
-					secattr) != 0) {
-			/* we failed to label the connected socket (could be
-			 * for a variety of reasons, the actual "why" isn't
-			 * important here) so we have to go to our backup plan,
-			 * labeling the packets individually in the netfilter
-			 * local output hook.  this is okay but we need to
-			 * adjust the MSS of the connection to take into
-			 * account any labeling overhead, since we don't know
-			 * the exact overhead at this point we'll use the worst
-			 * case value which is 40 bytes for IPv4 */
-			struct inet_connection_sock *sk_conn = inet_csk(sk);
-			sk_conn->icsk_ext_hdr_len += 40 -
-				      (sk_inet->opt ? sk_inet->opt->optlen : 0);
-			sk_conn->icsk_sync_mss(sk, sk_conn->icsk_pmtu_cookie);
-
-			sksec->nlbl_state = NLBL_REQSKB;
-		} else
-			sksec->nlbl_state = NLBL_CONNLABELED;
-		break;
-	default:
-		/* note that we are failing to label the socket which could be
-		 * a bad thing since it means traffic could leave the system
-		 * without the desired labeling, however, all is not lost as
-		 * we have a check in selinux_netlbl_inode_permission() to
-		 * pick up the pieces that we might drop here because we can't
-		 * return an error code */
-		break;
-	}
+	netlbl_secattr_init(&secattr);
+	rc = security_netlbl_sid_to_secattr(req->secid, &secattr);
+	if (rc != 0)
+		goto inet_conn_request_return;
+	rc = netlbl_req_setattr(req, &secattr);
+inet_conn_request_return:
+	netlbl_secattr_destroy(&secattr);
+	return rc;
 }
 
 /**
- * selinux_netlbl_socket_post_create - Label a socket using NetLabel
- * @sock: the socket to label
+ * selinux_netlbl_inet_csk_clone - Initialize the newly created sock
+ * @sk: the new sock
  *
  * Description:
- * Attempt to label a socket using the NetLabel mechanism using the given
- * SID.  Returns zero values on success, negative values on failure.
+ * A new connection has been established using @sk, we've already labeled the
+ * socket via the request_sock struct in selinux_netlbl_inet_conn_request() but
+ * we need to set the NetLabel state here since we now have a sock structure.
  *
  */
-int selinux_netlbl_socket_post_create(struct socket *sock)
+void selinux_netlbl_inet_csk_clone(struct sock *sk, u16 family)
 {
-	return selinux_netlbl_sock_setsid(sock->sk);
+	struct sk_security_struct *sksec = sk->sk_security;
+
+	if (family == PF_INET)
+		sksec->nlbl_state = NLBL_LABELED;
+	else
+		sksec->nlbl_state = NLBL_UNSET;
 }
 
 /**
- * selinux_netlbl_inode_permission - Verify the socket is NetLabel labeled
- * @inode: the file descriptor's inode
- * @mask: the permission mask
+ * selinux_netlbl_socket_post_create - Label a socket using NetLabel
+ * @sock: the socket to label
+ * @family: protocol family
  *
  * Description:
- * Looks at a file's inode and if it is marked as a socket protected by
- * NetLabel then verify that the socket has been labeled, if not try to label
- * the socket now with the inode's SID.  Returns zero on success, negative
- * values on failure.
+ * Attempt to label a socket using the NetLabel mechanism using the given
+ * SID.  Returns zero values on success, negative values on failure.
  *
  */
-int selinux_netlbl_inode_permission(struct inode *inode, int mask)
+int selinux_netlbl_socket_post_create(struct sock *sk, u16 family)
 {
 	int rc;
-	struct sock *sk;
-	struct socket *sock;
-	struct sk_security_struct *sksec;
+	struct sk_security_struct *sksec = sk->sk_security;
+	struct netlbl_lsm_secattr *secattr;
 
-	if (!S_ISSOCK(inode->i_mode) ||
-	    ((mask & (MAY_WRITE | MAY_APPEND)) == 0))
-		return 0;
-	sock = SOCKET_I(inode);
-	sk = sock->sk;
-	if (sk == NULL)
-		return 0;
-	sksec = sk->sk_security;
-	if (sksec == NULL || sksec->nlbl_state != NLBL_REQUIRE)
+	if (family != PF_INET)
 		return 0;
 
-	local_bh_disable();
-	bh_lock_sock_nested(sk);
-	if (likely(sksec->nlbl_state == NLBL_REQUIRE))
-		rc = selinux_netlbl_sock_setsid(sk);
-	else
+	secattr = selinux_netlbl_sock_genattr(sk);
+	if (secattr == NULL)
+		return -ENOMEM;
+	rc = netlbl_sock_setattr(sk, family, secattr);
+	switch (rc) {
+	case 0:
+		sksec->nlbl_state = NLBL_LABELED;
+		break;
+	case -EDESTADDRREQ:
+		sksec->nlbl_state = NLBL_REQSKB;
 		rc = 0;
-	bh_unlock_sock(sk);
-	local_bh_enable();
+		break;
+	}
 
 	return rc;
 }