summaryrefslogtreecommitdiffstats
path: root/sound/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-12 15:29:53 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-12 15:29:53 +0900
commiteeab517b68beb9e044e869bee18e3bdfa60e5aca (patch)
tree48a47e3223786919f664824842a5a23d7a8d99cd /sound/arm
parentf095ca6b31cfd20e6e7e0338ed8548d8a4374287 (diff)
parenta6bc732b5a96b5403c2637e85c350b95ec6591f3 (diff)
Merge tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai: "There are no too intrusive changes in this update batch. The biggest LOC is found in the new DICE driver, and other small changes are scattered over the whole sound subtree (which is a common pattern). Below are highlights: - ALSA core: * Memory allocation support with genpool * Fix blocking in drain ioctl of compress_offload - HD-audio: * Improved AMD HDMI supports * Intel HDMI detection improvements * thinkpad_acpi mute-key integration * New PCI ID, New ALC255,285,293 codecs, CX20952 - USB-audio: * New buffer size management * Clean up endpoint handling codes - ASoC: * Further work on the dmaengine helpers, including support for configuring the parameters for DMA by reading the capabilities of the DMA controller which removes some guesswork and magic numbers from drivers. * A refresh of the documentation. * Conversions of many drivers to direct regmap API usage in order to allow the ASoC level register I/O code to be removed, this will hopefully be completed by v3.14. * Support for using async register I/O in DAPM, reducing the time taken to implement power transitions on systems that support it. - Firewire: DICE driver - Lots of small fixes for bugs reported by Coverity" * tag 'sound-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (382 commits) ALSA: hda/realtek - Add new codec ALC255/ALC3234 UAJ supported ALSA: hda - Apply MacBook fixups for CS4208 correctly ASoC: fsl: imx-wm8962: remove an unneeded check ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable ALSA: hda/realtek - Make fixup regs persist after resume ALSA: hda_intel: ratelimit "spurious response" message ASoC: generic-dmaengine-pcm: Use SNDRV_DMA_TYPE_DEV_IRAM as default ASoC: dapm: Use WARN_ON() instead of BUG_ON() ASoC: wm_adsp: Fix BUG_ON() and WARN_ON() usages ASoC: Replace BUG() with WARN() ASoC: wm_hubs: Replace BUG() with WARN() ASoC: wm8996: Replace BUG() with WARN() ASoC: wm8962: Replace BUG() with WARN() ASoC: wm8958: Replace BUG() with WARN() ASoC: wm8904: Replace BUG() with WARN() ASoC: wm8900: Replace BUG() with WARN() ASoC: wm8350: Replace BUG() with WARN() ASoC: txx9: Use WARN_ON() instead of BUG_ON() ASoC: sh: Use WARN_ON() instead of BUG_ON() ASoC: rcar: Use WARN_ON() instead of BUG_ON() ...
Diffstat (limited to 'sound/arm')
-rw-r--r--sound/arm/pxa2xx-ac97-lib.c31
-rw-r--r--sound/arm/pxa2xx-ac97.c2
2 files changed, 13 insertions, 20 deletions
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index e6f4633b8dd..66de90ed30c 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -117,8 +117,7 @@ static inline void pxa_ac97_warm_pxa25x(void)
{
gsr_bits = 0;
- GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
- wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
+ GCR |= GCR_WARM_RST;
}
static inline void pxa_ac97_cold_pxa25x(void)
@@ -129,8 +128,6 @@ static inline void pxa_ac97_cold_pxa25x(void)
gsr_bits = 0;
GCR = GCR_COLD_RST;
- GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
- wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
}
#endif
@@ -149,8 +146,6 @@ static inline void pxa_ac97_warm_pxa27x(void)
static inline void pxa_ac97_cold_pxa27x(void)
{
- unsigned int timeout;
-
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
@@ -161,29 +156,20 @@ static inline void pxa_ac97_cold_pxa27x(void)
udelay(5);
clk_disable(ac97conf_clk);
GCR = GCR_COLD_RST | GCR_WARM_RST;
- timeout = 100; /* wait for the codec-ready bit to be set */
- while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(1);
}
#endif
#ifdef CONFIG_PXA3xx
static inline void pxa_ac97_warm_pxa3xx(void)
{
- int timeout = 100;
-
gsr_bits = 0;
/* Can't use interrupts */
GCR |= GCR_WARM_RST;
- while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(1);
}
static inline void pxa_ac97_cold_pxa3xx(void)
{
- int timeout = 1000;
-
/* Hold CLKBPB for 100us */
GCR = 0;
GCR = GCR_CLKBPB;
@@ -199,14 +185,13 @@ static inline void pxa_ac97_cold_pxa3xx(void)
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR = GCR_WARM_RST | GCR_COLD_RST;
- while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--)
- mdelay(10);
}
#endif
bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
{
unsigned long gsr;
+ unsigned int timeout = 100;
#ifdef CONFIG_PXA25x
if (cpu_is_pxa25x())
@@ -223,7 +208,11 @@ bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97)
pxa_ac97_warm_pxa3xx();
else
#endif
- BUG();
+ snd_BUG();
+
+ while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+ mdelay(1);
+
gsr = GSR | gsr_bits;
if (!(gsr & (GSR_PCR | GSR_SCR))) {
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
@@ -239,6 +228,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
{
unsigned long gsr;
+ unsigned int timeout = 1000;
#ifdef CONFIG_PXA25x
if (cpu_is_pxa25x())
@@ -255,7 +245,10 @@ bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97)
pxa_ac97_cold_pxa3xx();
else
#endif
- BUG();
+ snd_BUG();
+
+ while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--)
+ mdelay(1);
gsr = GSR | gsr_bits;
if (!(gsr & (GSR_PCR | GSR_SCR))) {
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 5066a3768b2..9a2ac1e0f77 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -185,7 +185,7 @@ static int pxa2xx_ac97_probe(struct platform_device *dev)
goto err;
card->dev = &dev->dev;
- strncpy(card->driver, dev->dev.driver->name, sizeof(card->driver));
+ strlcpy(card->driver, dev->dev.driver->name, sizeof(card->driver));
ret = pxa2xx_pcm_new(card, &pxa2xx_ac97_pcm_client, &pxa2xx_ac97_pcm);
if (ret)