[ALSA] sound/isa: kill pnp_resource_change

This removes the pnp_resource_change use from the ALSA ISAPnP drivers. In
2.4 these were useful in providing an easy path to setting the resources,
but in 2.6 they retain function as a layering violation only.
This makes for a nice cleanup (-550 lines) of ALSA but moreover, ALSA is the
only remaining user of pnp_init_resource_table(), pnp_resource_change() and
pnp_manual_config_dev() (and, in fact, of 'struct pnp_resource_table') in
the tree outide of drivers/pnp itself meaning it makes for more cleanup
potential inside the PnP layer.
Thomas Renninger acked their removal from that side, you did from the ALSA
side (CC list just copied from that thread).
Against current alsa-kernel HG. Many more potential cleanups in there, but
this _only_ removes the pnp_resource_change code. Compile tested against
current alsa-kernel HG and compile- and use-tested against 2.6.23.x (few
offsets).
Cc: Thomas Renninger <trenn@suse.de>

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

1 files changed, 1 insertions, 49 deletions

diff --git a/sound/isa/azt2320.c b/sound/isa/azt2320.c
index b615538a928..bfe3a255815 100644
--- a/sound/isa/azt2320.c
+++ b/sound/isa/azt2320.c
@@ -72,22 +72,6 @@ module_param_array(id, charp, NULL, 0444);
 MODULE_PARM_DESC(id, "ID string for azt2320 based soundcard.");
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable azt2320 based soundcard.");
-module_param_array(port, long, NULL, 0444);
-MODULE_PARM_DESC(port, "Port # for azt2320 driver.");
-module_param_array(wss_port, long, NULL, 0444);
-MODULE_PARM_DESC(wss_port, "WSS Port # for azt2320 driver.");
-module_param_array(mpu_port, long, NULL, 0444);
-MODULE_PARM_DESC(mpu_port, "MPU-401 port # for azt2320 driver.");
-module_param_array(fm_port, long, NULL, 0444);
-MODULE_PARM_DESC(fm_port, "FM port # for azt2320 driver.");
-module_param_array(irq, int, NULL, 0444);
-MODULE_PARM_DESC(irq, "IRQ # for azt2320 driver.");
-module_param_array(mpu_irq, int, NULL, 0444);
-MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for azt2320 driver.");
-module_param_array(dma1, int, NULL, 0444);
-MODULE_PARM_DESC(dma1, "1st DMA # for azt2320 driver.");
-module_param_array(dma2, int, NULL, 0444);
-MODULE_PARM_DESC(dma2, "2nd DMA # for azt2320 driver.");
 
 struct snd_card_azt2320 {
 	int dev_no;
@@ -121,43 +105,19 @@ static int __devinit snd_card_azt2320_pnp(int dev, struct snd_card_azt2320 *acar
 					  const struct pnp_card_device_id *id)
 {
 	struct pnp_dev *pdev;
-	struct pnp_resource_table * cfg = kmalloc(sizeof(struct pnp_resource_table), GFP_KERNEL);
 	int err;
 
-	if (!cfg)
-		return -ENOMEM;
-
 	acard->dev = pnp_request_card_device(card, id->devs[0].id, NULL);
-	if (acard->dev == NULL) {
-		kfree(cfg);
+	if (acard->dev == NULL)
 		return -ENODEV;
-	}
 
 	acard->devmpu = pnp_request_card_device(card, id->devs[1].id, NULL);
 
 	pdev = acard->dev;
-	pnp_init_resource_table(cfg);
-
-	/* override resources */
-	if (port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[0], port[dev], 16);
-	if (fm_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[1], fm_port[dev], 4);
-	if (wss_port[dev] != SNDRV_AUTO_PORT)
-		pnp_resource_change(&cfg->port_resource[2], wss_port[dev], 4);
-	if (dma1[dev] != SNDRV_AUTO_DMA)
-		pnp_resource_change(&cfg->dma_resource[0], dma1[dev], 1);
-	if (dma2[dev] != SNDRV_AUTO_DMA)
-		pnp_resource_change(&cfg->dma_resource[1], dma2[dev], 1);
-	if (irq[dev] != SNDRV_AUTO_IRQ)
-		pnp_resource_change(&cfg->irq_resource[0], irq[dev], 1);
-	if ((pnp_manual_config_dev(pdev, cfg, 0)) < 0)
-		snd_printk(KERN_ERR PFX "AUDIO the requested resources are invalid, using auto config\n");
 
 	err = pnp_activate_dev(pdev);
 	if (err < 0) {
 		snd_printk(KERN_ERR PFX "AUDIO pnp configure failure\n");
-		kfree(cfg);
 		return err;
 	}
 	port[dev] = pnp_port_start(pdev, 0);
@@ -169,13 +129,6 @@ static int __devinit snd_card_azt2320_pnp(int dev, struct snd_card_azt2320 *acar
 
 	pdev = acard->devmpu;
 	if (pdev != NULL) {
-		pnp_init_resource_table(cfg);
-		if (mpu_port[dev] != SNDRV_AUTO_PORT)
-			pnp_resource_change(&cfg->port_resource[0], mpu_port[dev], 2);
-		if (mpu_irq[dev] != SNDRV_AUTO_IRQ)
-			pnp_resource_change(&cfg->irq_resource[0], mpu_irq[dev], 1);
-		if ((pnp_manual_config_dev(pdev, cfg, 0)) < 0)
-			snd_printk(KERN_ERR PFX "MPU401 the requested resources are invalid, using auto config\n");
 		err = pnp_activate_dev(pdev);
 		if (err < 0)
 			goto __mpu_error;
@@ -191,7 +144,6 @@ static int __devinit snd_card_azt2320_pnp(int dev, struct snd_card_azt2320 *acar
 	     	mpu_port[dev] = -1;
 	}
 
-	kfree (cfg);
 	return 0;
 }