diff options
| author | Axel Lin <axel.lin@ingics.com> | 2013-04-23 14:01:31 +0800 |
|---|---|---|
| committer | Thierry Reding <thierry.reding@avionic-design.de> | 2013-04-23 10:58:35 +0200 |
| commit | 08ee77b5a5de27ad63c92262ebcb4efe0da93b58 (patch) | |
| tree | 53a9b7ed0369ca015923b638457ceba14edce926 /sound/oss/dmabuf.c | |
| parent | f1a8870aeb5baeb58f0613d1f1e1dca967127fbd (diff) | |
pwm: lpc32xx: Properly set PWM_ENABLE bit in lpc32xx_pwm_[enable|disable]
According to the LPC32x0 User Manual [1]:
For both PWM1 and PWM2 Control Registers:
BIT 31:
This bit gates the PWM_CLK signal and enables the external output pin
to the PWM_PIN_STATE logical level.
0 = PWM disabled. (Default)
1 = PWM enabled
So in lpc32xx_pwm_enable(), we should set PWM_ENABLE bit.
In lpc32xx_pwm_disable(), we should just clear PWM_ENABLE bit rather than
write 0 to the register which will also clear PWMx_RELOADV and PWMx_DUTY bits.
[1] http://www.nxp.com/documents/user_manual/UM10326.pdf
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Diffstat (limited to 'sound/oss/dmabuf.c')
0 files changed, 0 insertions, 0 deletions