scheduled OSS driver removal

This patch contains the scheduled removal of OSS drivers whose config
options have been removed in 2.6.23.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 3616 deletions

diff --git a/sound/oss/via82cxxx_audio.c b/sound/oss/via82cxxx_audio.c
deleted file mode 100644
index f95aa094675..00000000000
--- a/sound/oss/via82cxxx_audio.c
+++ /dev/null
@@ -1,3616 +0,0 @@
-/*
- * Support for VIA 82Cxxx Audio Codecs
- * Copyright 1999,2000 Jeff Garzik
- *
- * Updated to support the VIA 8233/8235 audio subsystem
- * Alan Cox <alan@redhat.com> (C) Copyright 2002, 2003 Red Hat Inc
- *
- * Distributed under the GNU GENERAL PUBLIC LICENSE (GPL) Version 2.
- * See the "COPYING" file distributed with this software for more info.
- * NO WARRANTY
- *
- * For a list of known bugs (errata) and documentation,
- * see via-audio.pdf in Documentation/DocBook.
- * If this documentation does not exist, run "make pdfdocs".
- */
-
-
-#define VIA_VERSION	"1.9.1-ac4-2.5"
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/poison.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/sound.h>
-#include <linux/poll.h>
-#include <linux/soundcard.h>
-#include <linux/ac97_codec.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/mutex.h>
-
-#include "sound_config.h"
-#include "dev_table.h"
-#include "mpu401.h"
-
-
-#undef VIA_DEBUG	/* define to enable debugging output and checks */
-#ifdef VIA_DEBUG
-/* note: prints function name for you */
-#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
-#else
-#define DPRINTK(fmt, args...)
-#endif
-
-#undef VIA_NDEBUG	/* define to disable lightweight runtime checks */
-#ifdef VIA_NDEBUG
-#define assert(expr)
-#else
-#define assert(expr) \
-        if(!(expr)) {					\
-        printk( "Assertion failed! %s,%s,%s,line=%d\n",	\
-        #expr,__FILE__,__FUNCTION__,__LINE__);		\
-        }
-#endif
-
-#define VIA_SUPPORT_MMAP 1 /* buggy, for now... */
-
-#define MAX_CARDS	1
-
-#define VIA_CARD_NAME	"VIA 82Cxxx Audio driver " VIA_VERSION
-#define VIA_MODULE_NAME "via82cxxx"
-#define PFX		VIA_MODULE_NAME ": "
-
-#define VIA_COUNTER_LIMIT	100000
-
-/* size of DMA buffers */
-#define VIA_MAX_BUFFER_DMA_PAGES	32
-
-/* buffering default values in ms */
-#define VIA_DEFAULT_FRAG_TIME		20
-#define VIA_DEFAULT_BUFFER_TIME		500
-
-/* the hardware has a 256 fragment limit */
-#define VIA_MIN_FRAG_NUMBER		2
-#define VIA_MAX_FRAG_NUMBER		128
-
-#define VIA_MAX_FRAG_SIZE		PAGE_SIZE
-#define VIA_MIN_FRAG_SIZE		(VIA_MAX_BUFFER_DMA_PAGES * PAGE_SIZE / VIA_MAX_FRAG_NUMBER)
-
-
-/* 82C686 function 5 (audio codec) PCI configuration registers */
-#define VIA_ACLINK_STATUS	0x40
-#define VIA_ACLINK_CTRL		0x41
-#define VIA_FUNC_ENABLE		0x42
-#define VIA_PNP_CONTROL		0x43
-#define VIA_FM_NMI_CTRL		0x48
-
-/*
- * controller base 0 (scatter-gather) registers
- *
- * NOTE: Via datasheet lists first channel as "read"
- * channel and second channel as "write" channel.
- * I changed the naming of the constants to be more
- * clear than I felt the datasheet to be.
- */
-
-#define VIA_BASE0_PCM_OUT_CHAN	0x00 /* output PCM to user */
-#define VIA_BASE0_PCM_OUT_CHAN_STATUS 0x00
-#define VIA_BASE0_PCM_OUT_CHAN_CTRL	0x01
-#define VIA_BASE0_PCM_OUT_CHAN_TYPE	0x02
-
-#define VIA_BASE0_PCM_IN_CHAN		0x10 /* input PCM from user */
-#define VIA_BASE0_PCM_IN_CHAN_STATUS	0x10
-#define VIA_BASE0_PCM_IN_CHAN_CTRL	0x11
-#define VIA_BASE0_PCM_IN_CHAN_TYPE	0x12
-
-/* offsets from base */
-#define VIA_PCM_STATUS			0x00
-#define VIA_PCM_CONTROL			0x01
-#define VIA_PCM_TYPE			0x02
-#define VIA_PCM_LEFTVOL			0x02
-#define VIA_PCM_RIGHTVOL		0x03
-#define VIA_PCM_TABLE_ADDR		0x04
-#define VIA_PCM_STOPRATE		0x08	/* 8233+ */
-#define VIA_PCM_BLOCK_COUNT		0x0C
-
-/* XXX unused DMA channel for FM PCM data */
-#define VIA_BASE0_FM_OUT_CHAN		0x20
-#define VIA_BASE0_FM_OUT_CHAN_STATUS	0x20
-#define VIA_BASE0_FM_OUT_CHAN_CTRL	0x21
-#define VIA_BASE0_FM_OUT_CHAN_TYPE	0x22
-
-/* Six channel audio output on 8233 */
-#define VIA_BASE0_MULTI_OUT_CHAN		0x40
-#define VIA_BASE0_MULTI_OUT_CHAN_STATUS		0x40
-#define VIA_BASE0_MULTI_OUT_CHAN_CTRL		0x41
-#define VIA_BASE0_MULTI_OUT_CHAN_TYPE		0x42
-
-#define VIA_BASE0_AC97_CTRL		0x80
-#define VIA_BASE0_SGD_STATUS_SHADOW	0x84
-#define VIA_BASE0_GPI_INT_ENABLE	0x8C
-#define VIA_INTR_OUT			((1<<0) |  (1<<4) |  (1<<8))
-#define VIA_INTR_IN			((1<<1) |  (1<<5) |  (1<<9))
-#define VIA_INTR_FM			((1<<2) |  (1<<6) | (1<<10))
-#define VIA_INTR_MASK		(VIA_INTR_OUT | VIA_INTR_IN | VIA_INTR_FM)
-
-/* Newer VIA we need to monitor the low 3 bits of each channel. This
-   mask covers the channels we don't yet use as well 
- */
- 
-#define VIA_NEW_INTR_MASK		0x77077777UL
-
-/* VIA_BASE0_AUDIO_xxx_CHAN_TYPE bits */
-#define VIA_IRQ_ON_FLAG			(1<<0)	/* int on each flagged scatter block */
-#define VIA_IRQ_ON_EOL			(1<<1)	/* int at end of scatter list */
-#define VIA_INT_SEL_PCI_LAST_LINE_READ	(0)	/* int at PCI read of last line */
-#define VIA_INT_SEL_LAST_SAMPLE_SENT	(1<<2)	/* int at last sample sent */
-#define VIA_INT_SEL_ONE_LINE_LEFT	(1<<3)	/* int at less than one line to send */
-#define VIA_PCM_FMT_STEREO		(1<<4)	/* PCM stereo format (bit clear == mono) */
-#define VIA_PCM_FMT_16BIT		(1<<5)	/* PCM 16-bit format (bit clear == 8-bit) */
-#define VIA_PCM_REC_FIFO		(1<<6)	/* PCM Recording FIFO */
-#define VIA_RESTART_SGD_ON_EOL		(1<<7)	/* restart scatter-gather at EOL */
-#define VIA_PCM_FMT_MASK		(VIA_PCM_FMT_STEREO|VIA_PCM_FMT_16BIT)
-#define VIA_CHAN_TYPE_MASK		(VIA_RESTART_SGD_ON_EOL | \
-					 VIA_IRQ_ON_FLAG | \
-					 VIA_IRQ_ON_EOL)
-#define VIA_CHAN_TYPE_INT_SELECT	(VIA_INT_SEL_LAST_SAMPLE_SENT)
-
-/* PCI configuration register bits and masks */
-#define VIA_CR40_AC97_READY	0x01
-#define VIA_CR40_AC97_LOW_POWER	0x02
-#define VIA_CR40_SECONDARY_READY 0x04
-
-#define VIA_CR41_AC97_ENABLE	0x80 /* enable AC97 codec */
-#define VIA_CR41_AC97_RESET	0x40 /* clear bit to reset AC97 */
-#define VIA_CR41_AC97_WAKEUP	0x20 /* wake up from power-down mode */
-#define VIA_CR41_AC97_SDO	0x10 /* force Serial Data Out (SDO) high */
-#define VIA_CR41_VRA		0x08 /* enable variable sample rate */
-#define VIA_CR41_PCM_ENABLE	0x04 /* AC Link SGD Read Channel PCM Data Output */
-#define VIA_CR41_FM_PCM_ENABLE	0x02 /* AC Link FM Channel PCM Data Out */
-#define VIA_CR41_SB_PCM_ENABLE	0x01 /* AC Link SB PCM Data Output */
-#define VIA_CR41_BOOT_MASK	(VIA_CR41_AC97_ENABLE | \
-				 VIA_CR41_AC97_WAKEUP | \
-				 VIA_CR41_AC97_SDO)
-#define VIA_CR41_RUN_MASK	(VIA_CR41_AC97_ENABLE | \
-				 VIA_CR41_AC97_RESET | \
-				 VIA_CR41_VRA | \
-				 VIA_CR41_PCM_ENABLE)
-
-#define VIA_CR42_SB_ENABLE	0x01
-#define VIA_CR42_MIDI_ENABLE	0x02
-#define VIA_CR42_FM_ENABLE	0x04
-#define VIA_CR42_GAME_ENABLE	0x08
-#define VIA_CR42_MIDI_IRQMASK   0x40
-#define VIA_CR42_MIDI_PNP	0x80
-
-#define VIA_CR44_SECOND_CODEC_SUPPORT	(1 << 6)
-#define VIA_CR44_AC_LINK_ACCESS		(1 << 7)
-
-#define VIA_CR48_FM_TRAP_TO_NMI		(1 << 2)
-
-/* controller base 0 register bitmasks */
-#define VIA_INT_DISABLE_MASK		(~(0x01|0x02))
-#define VIA_SGD_STOPPED			(1 << 2)
-#define VIA_SGD_PAUSED			(1 << 6)
-#define VIA_SGD_ACTIVE			(1 << 7)
-#define VIA_SGD_TERMINATE		(1 << 6)
-#define VIA_SGD_FLAG			(1 << 0)
-#define VIA_SGD_EOL			(1 << 1)
-#define VIA_SGD_START			(1 << 7)
-
-#define VIA_CR80_FIRST_CODEC		0
-#define VIA_CR80_SECOND_CODEC		(1 << 30)
-#define VIA_CR80_FIRST_CODEC_VALID	(1 << 25)
-#define VIA_CR80_VALID			(1 << 25)
-#define VIA_CR80_SECOND_CODEC_VALID	(1 << 27)
-#define VIA_CR80_BUSY			(1 << 24)
-#define VIA_CR83_BUSY			(1)
-#define VIA_CR83_FIRST_CODEC_VALID	(1 << 1)
-#define VIA_CR80_READ			(1 << 23)
-#define VIA_CR80_WRITE_MODE		0
-#define VIA_CR80_REG_IDX(idx)		((((idx) & 0xFF) >> 1) << 16)
-
-/* capabilities we announce */
-#ifdef VIA_SUPPORT_MMAP
-#define VIA_DSP_CAP (DSP_CAP_REVISION | DSP_CAP_DUPLEX | DSP_CAP_MMAP | \
-		     DSP_CAP_TRIGGER | DSP_CAP_REALTIME)
-#else
-#define VIA_DSP_CAP (DSP_CAP_REVISION | DSP_CAP_DUPLEX | \
-		     DSP_CAP_TRIGGER | DSP_CAP_REALTIME)
-#endif
-
-/* scatter-gather DMA table entry, exactly as passed to hardware */
-struct via_sgd_table {
-	u32 addr;
-	u32 count;	/* includes additional VIA_xxx bits also */
-};
-
-#define VIA_EOL (1 << 31)
-#define VIA_FLAG (1 << 30)
-#define VIA_STOP (1 << 29)
-
-
-enum via_channel_states {
-	sgd_stopped = 0,
-	sgd_in_progress = 1,
-};
-
-
-struct via_buffer_pgtbl {
-	dma_addr_t handle;
-	void *cpuaddr;
-};
-
-
-struct via_channel {
-	atomic_t n_frags;
-	atomic_t hw_ptr;
-	wait_queue_head_t wait;
-
-	unsigned int sw_ptr;
-	unsigned int slop_len;
-	unsigned int n_irqs;
-	int bytes;
-
-	unsigned is_active : 1;
-	unsigned is_record : 1;
-	unsigned is_mapped : 1;
-	unsigned is_enabled : 1;
-	unsigned is_multi: 1;	/* 8233 6 channel */
-	u8 pcm_fmt;		/* VIA_PCM_FMT_xxx */
-	u8 channels;		/* Channel count */
-
-	unsigned rate;		/* sample rate */
-	unsigned int frag_size;
-	unsigned int frag_number;
-	
-	unsigned char intmask;
-
-	volatile struct via_sgd_table *sgtable;
-	dma_addr_t sgt_handle;
-
-	unsigned int page_number;
-	struct via_buffer_pgtbl pgtbl[VIA_MAX_BUFFER_DMA_PAGES];
-
-	long iobase;
-
-	const char *name;
-};
-
-
-/* data stored for each chip */
-struct via_info {
-	struct pci_dev *pdev;
-	long baseaddr;
-
-	struct ac97_codec *ac97;
-	spinlock_t ac97_lock;
-	spinlock_t lock;
-	int card_num;		/* unique card number, from 0 */
-
-	int dev_dsp;		/* /dev/dsp index from register_sound_dsp() */
-
-	unsigned rev_h : 1;
-	unsigned legacy: 1;	/* Has legacy ports */
-	unsigned intmask: 1;	/* Needs int bits */
-	unsigned sixchannel: 1;	/* 8233/35 with 6 channel support */
-	unsigned volume: 1;
-
-	unsigned locked_rate : 1;
-	
-	int mixer_vol;		/* 8233/35 volume  - not yet implemented */
-
-	struct mutex syscall_mutex;
-	struct mutex open_mutex;
-
-	/* The 8233/8235 have 4 DX audio channels, two record and
-	   one six channel out. We bind ch_in to DX 1, ch_out to multichannel
-	   and ch_fm to DX 2. DX 3 and REC0/REC1 are unused at the
-	   moment */
-	   
-	struct via_channel ch_in;
-	struct via_channel ch_out;
-	struct via_channel ch_fm;
-
-#ifdef CONFIG_MIDI_VIA82CXXX
-        void *midi_devc;
-        struct address_info midi_info;
-#endif
-};
-
-
-/* number of cards, used for assigning unique numbers to cards */
-static unsigned via_num_cards;
-
-
-
-/****************************************************************
- *
- * prototypes
- *
- *
- */
-
-static int via_init_one (struct pci_dev *dev, const struct pci_device_id *id);
-static void __devexit via_remove_one (struct pci_dev *pdev);
-
-static ssize_t via_dsp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos);
-static ssize_t via_dsp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos);
-static unsigned int via_dsp_poll(struct file *file, struct poll_table_struct *wait);
-static int via_dsp_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg);
-static int via_dsp_open (struct inode *inode, struct file *file);
-static int via_dsp_release(struct inode *inode, struct file *file);
-static int via_dsp_mmap(struct file *file, struct vm_area_struct *vma);
-
-static u16 via_ac97_read_reg (struct ac97_codec *codec, u8 reg);
-static void via_ac97_write_reg (struct ac97_codec *codec, u8 reg, u16 value);
-static u8 via_ac97_wait_idle (struct via_info *card);
-
-static void via_chan_free (struct via_info *card, struct via_channel *chan);
-static void via_chan_clear (struct via_info *card, struct via_channel *chan);
-static void via_chan_pcm_fmt (struct via_channel *chan, int reset);
-static void via_chan_buffer_free (struct via_info *card, struct via_channel *chan);
-
-
-/****************************************************************
- *
- * Various data the driver needs
- *
- *
- */
-
-
-static struct pci_device_id via_pci_tbl[] = {
-	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
-	{ 0, }
-};
-MODULE_DEVICE_TABLE(pci,via_pci_tbl);
-
-
-static struct pci_driver via_driver = {
-	.name		= VIA_MODULE_NAME,
-	.id_table	= via_pci_tbl,
-	.probe		= via_init_one,
-	.remove		= __devexit_p(via_remove_one),
-};
-
-
-/****************************************************************
- *
- * Low-level base 0 register read/write helpers
- *
- *
- */
-
-/**
- *	via_chan_stop - Terminate DMA on specified PCM channel
- *	@iobase: PCI base address for SGD channel registers
- *
- *	Terminate scatter-gather DMA operation for given
- *	channel (derived from @iobase), if DMA is active.
- *
- *	Note that @iobase is not the PCI base address,
- *	but the PCI base address plus an offset to
- *	one of three PCM channels supported by the chip.
- *
- */
-
-static inline void via_chan_stop (long iobase)
-{
-	if (inb (iobase + VIA_PCM_STATUS) & VIA_SGD_ACTIVE)
-		outb (VIA_SGD_TERMINATE, iobase + VIA_PCM_CONTROL);
-}
-
-
-/**
- *	via_chan_status_clear - Clear status flags on specified DMA channel
- *	@iobase: PCI base address for SGD channel registers
- *
- *	Clear any pending status flags for the given
- *	DMA channel (derived from @iobase), if any
- *	flags are asserted.
- *
- *	Note that @iobase is not the PCI base address,
- *	but the PCI base address plus an offset to
- *	one of three PCM channels supported by the chip.
- *
- */
-
-static inline void via_chan_status_clear (long iobase)
-{
-	u8 tmp = inb (iobase + VIA_PCM_STATUS);
-
-	if (tmp != 0)
-		outb (tmp, iobase + VIA_PCM_STATUS);
-}
-
-
-/**
- *	sg_begin - Begin recording or playback on a PCM channel
- *	@chan: Channel for which DMA operation shall begin
- *
- *	Start scatter-gather DMA for the given channel.
- *
- */
-
-static inline void sg_begin (struct via_channel *chan)
-{
-	DPRINTK("Start with intmask %d\n", chan->intmask);
-	DPRINTK("About to start from %d to %d\n", 
-		inl(chan->iobase + VIA_PCM_BLOCK_COUNT),
-		inb(chan->iobase + VIA_PCM_STOPRATE + 3));
-	outb (VIA_SGD_START|chan->intmask, chan->iobase + VIA_PCM_CONTROL);
-	DPRINTK("Status is now %02X\n", inb(chan->iobase + VIA_PCM_STATUS));
-	DPRINTK("Control is now %02X\n", inb(chan->iobase + VIA_PCM_CONTROL));
-}
-
-
-static int sg_active (long iobase)
-{
-	u8 tmp = inb (iobase + VIA_PCM_STATUS);
-	if ((tmp & VIA_SGD_STOPPED) || (tmp & VIA_SGD_PAUSED)) {
-		printk(KERN_WARNING "via82cxxx warning: SG stopped or paused\n");
-		return 0;
-	}
-	if (tmp & VIA_SGD_ACTIVE)
-		return 1;
-	return 0;
-}
-
-static int via_sg_offset(struct via_channel *chan)
-{
-	return inl (chan->iobase + VIA_PCM_BLOCK_COUNT) & 0x00FFFFFF;
-}
-
-/****************************************************************
- *
- * Miscellaneous debris
- *
- *
- */
-
-
-/**
- *	via_syscall_down - down the card-specific syscell semaphore
- *	@card: Private info for specified board
- *	@nonblock: boolean, non-zero if O_NONBLOCK is set
- *
- *	Encapsulates standard method of acquiring the syscall sem.
- *
- *	Returns negative errno on error, or zero for success.
- */
-
-static inline int via_syscall_down (struct via_info *card, int nonblock)
-{
-	/* Thomas Sailer:
-	 * EAGAIN is supposed to be used if IO is pending,
-	 * not if there is contention on some internal
-	 * synchronization primitive which should be
-	 * held only for a short time anyway
-	 */
-	nonblock = 0;
-
-	if (nonblock) {
-		if (!mutex_trylock(&card->syscall_mutex))
-			return -EAGAIN;
-	} else {
-		if (mutex_lock_interruptible(&card->syscall_mutex))
-			return -ERESTARTSYS;
-	}
-
-	return 0;
-}
-
-
-/**
- *	via_stop_everything - Stop all audio operations
- *	@card: Private info for specified board
- *
- *	Stops all DMA operations and interrupts, and clear
- *	any pending status bits resulting from those operations.
- */
-
-static void via_stop_everything (struct via_info *card)
-{
-	u8 tmp, new_tmp;
-
-	DPRINTK ("ENTER\n");
-
-	assert (card != NULL);
-
-	/*
-	 * terminate any existing operations on audio read/write channels
-	 */
-	via_chan_stop (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN);
-	via_chan_stop (card->baseaddr + VIA_BASE0_PCM_IN_CHAN);
-	via_chan_stop (card->baseaddr + VIA_BASE0_FM_OUT_CHAN);
-	if(card->sixchannel)
-		via_chan_stop (card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN);
-
-	/*
-	 * clear any existing stops / flags (sanity check mainly)
-	 */
-	via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN);
-	via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_IN_CHAN);
-	via_chan_status_clear (card->baseaddr + VIA_BASE0_FM_OUT_CHAN);
-	if(card->sixchannel)
-		via_chan_status_clear (card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN);
-
-	/*
-	 * clear any enabled interrupt bits
-	 */
-	tmp = inb (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN_TYPE);
-	new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL);
-	if (tmp != new_tmp)
-		outb (0, card->baseaddr + VIA_BASE0_PCM_OUT_CHAN_TYPE);
-
-	tmp = inb (card->baseaddr + VIA_BASE0_PCM_IN_CHAN_TYPE);
-	new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL);
-	if (tmp != new_tmp)
-		outb (0, card->baseaddr + VIA_BASE0_PCM_IN_CHAN_TYPE);
-
-	tmp = inb (card->baseaddr + VIA_BASE0_FM_OUT_CHAN_TYPE);
-	new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL);
-	if (tmp != new_tmp)
-		outb (0, card->baseaddr + VIA_BASE0_FM_OUT_CHAN_TYPE);
-
-	if(card->sixchannel)
-	{
-		tmp = inb (card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN_TYPE);
-		new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL);
-		if (tmp != new_tmp)
-			outb (0, card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN_TYPE);
-	}
-
-	udelay(10);
-
-	/*
-	 * clear any existing flags
-	 */
-	via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN);
-	via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_IN_CHAN);
-	via_chan_status_clear (card->baseaddr + VIA_BASE0_FM_OUT_CHAN);
-
-	DPRINTK ("EXIT\n");
-}
-
-
-/**
- *	via_set_rate - Set PCM rate for given channel
- *	@ac97: Pointer to generic codec info struct
- *	@chan: Private info for specified channel
- *	@rate: Desired PCM sample rate, in Khz
- *
- *	Sets the PCM sample rate for a channel.
- *
- *	Values for @rate are clamped to a range of 4000 Khz through 48000 Khz,
- *	due to hardware constraints.
- */
-
-static int via_set_rate (struct ac97_codec *ac97,
-			 struct via_channel *chan, unsigned rate)
-{
-	struct via_info *card = ac97->private_data;
-	int rate_reg;
-	u32 dacp;
-	u32 mast_vol, phone_vol, mono_vol, pcm_vol;
-	u32 mute_vol = 0x8000;	/* The mute volume? -- Seems to work! */
-
-	DPRINTK ("ENTER, rate = %d\n", rate);
-
-	if (chan->rate == rate)
-		goto out;
-	if (card->locked_rate) {
-		chan->rate = 48000;
-		goto out;
-	}
-
-	if (rate > 48000)		rate = 48000;
-	if (rate < 4000) 		rate = 4000;
-
-	rate_reg = chan->is_record ? AC97_PCM_LR_ADC_RATE :
-			    AC97_PCM_FRONT_DAC_RATE;
-
-	/* Save current state */
-	dacp=via_ac97_read_reg(ac97, AC97_POWER_CONTROL);
-	mast_vol = via_ac97_read_reg(ac97, AC97_MASTER_VOL_STEREO);
-	mono_vol = via_ac97_read_reg(ac97, AC97_MASTER_VOL_MONO);
-	phone_vol = via_ac97_read_reg(ac97, AC97_HEADPHONE_VOL);
-	pcm_vol = via_ac97_read_reg(ac97, AC97_PCMOUT_VOL);
-	/* Mute - largely reduces popping */
-	via_ac97_write_reg(ac97, AC97_MASTER_VOL_STEREO, mute_vol);
-	via_ac97_write_reg(ac97, AC97_MASTER_VOL_MONO, mute_vol);
-	via_ac97_write_reg(ac97, AC97_HEADPHONE_VOL, mute_vol);
-       	via_ac97_write_reg(ac97, AC97_PCMOUT_VOL, mute_vol);
-	/* Power down the DAC */
-	via_ac97_write_reg(ac97, AC97_POWER_CONTROL, dacp|0x0200);
-
-        /* Set new rate */
-	via_ac97_write_reg (ac97, rate_reg, rate);
-
-	/* Power DAC back up */
-	via_ac97_write_reg(ac97, AC97_POWER_CONTROL, dacp);
-	udelay (200); /* reduces popping */
-
-	/* Restore volumes */
-	via_ac97_write_reg(ac97, AC97_MASTER_VOL_STEREO, mast_vol);
-	via_ac97_write_reg(ac97, AC97_MASTER_VOL_MONO, mono_vol);
-	via_ac97_write_reg(ac97, AC97_HEADPHONE_VOL, phone_vol);
-	via_ac97_write_reg(ac97, AC97_PCMOUT_VOL, pcm_vol);
-
-	/* the hardware might return a value different than what we
-	 * passed to it, so read the rate value back from hardware
-	 * to see what we came up with
-	 */
-	chan->rate = via_ac97_read_reg (ac97, rate_reg);
-
-	if (chan->rate == 0) {
-		card->locked_rate = 1;
-		chan->rate = 48000;
-		printk (KERN_WARNING PFX "Codec rate locked at 48Khz\n");
-	}
-
-out:
-	DPRINTK ("EXIT, returning rate %d Hz\n", chan->rate);
-	return chan->rate;
-}
-
-
-/****************************************************************
- *
- * Channel-specific operations
- *
- *
- */
-
-
-/**
- *	via_chan_init_defaults - Initialize a struct via_channel
- *	@card: Private audio chip info
- *	@chan: Channel to be initialized
- *
- *	Zero @chan, and then set all static defaults for the structure.
- */
-
-static void via_chan_init_defaults (struct via_info *card, struct via_channel *chan)
-{
-	memset (chan, 0, sizeof (*chan));
-
-	if(card->intmask)
-		chan->intmask = 0x23;	/* Turn on the IRQ bits */
-		
-	if (chan == &card->ch_out) {
-		chan->name = "PCM-OUT";
-		if(card->sixchannel)
-		{
-			chan->iobase = card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN;
-			chan->is_multi = 1;
-			DPRINTK("Using multichannel for pcm out\n");
-		}
-		else
-			chan->iobase = card->baseaddr + VIA_BASE0_PCM_OUT_CHAN;
-	} else if (chan == &card->ch_in) {
-		chan->name = "PCM-IN";
-		chan->iobase = card->baseaddr + VIA_BASE0_PCM_IN_CHAN;
-		chan->is_record = 1;
-	} else if (chan == &card->ch_fm) {
-		chan->name = "PCM-OUT-FM";
-		chan->iobase = card->baseaddr + VIA_BASE0_FM_OUT_CHAN;
-	} else {
-		BUG();
-	}
-
-	init_waitqueue_head (&chan->wait);
-
-	chan->pcm_fmt = VIA_PCM_FMT_MASK;
-	chan->is_enabled = 1;
-
-	chan->frag_number = 0;
-        chan->frag_size = 0;
-	atomic_set(&chan->n_frags, 0);
-	atomic_set (&chan->hw_ptr, 0);
-}
-
-/**
- *      via_chan_init - Initialize PCM channel
- *      @card: Private audio chip info
- *      @chan: Channel to be initialized
- *
- *      Performs some of the preparations necessary to begin
- *      using a PCM channel.
- *
- *      Currently the preparations consist of
- *      setting the PCM channel to a known state.
- */
-
-
-static void via_chan_init (struct via_info *card, struct via_channel *chan)
-{
-
-        DPRINTK ("ENTER\n");
-
-	/* bzero channel structure, and init members to defaults */
-        via_chan_init_defaults (card, chan);
-
-        /* stop any existing channel output */
-        via_chan_clear (card, chan);
-        via_chan_status_clear (chan->iobase);
-        via_chan_pcm_fmt (chan, 1);
-
-	DPRINTK ("EXIT\n");
-}
-
-/**
- *	via_chan_buffer_init - Initialize PCM channel buffer
- *	@card: Private audio chip info
- *	@chan: Channel to be initialized
- *
- *	Performs some of the preparations necessary to begin
- *	using a PCM channel.
- *
- *	Currently the preparations include allocating the
- *	scatter-gather DMA table and buffers,
- *	and passing the
- *	address of the DMA table to the hardware.
- *
- *	Note that special care is taken when passing the
- *	DMA table address to hardware, because it was found
- *	during driver development that the hardware did not
- *	always "take" the address.
- */
-
-static int via_chan_buffer_init (struct via_info *card, struct via_channel *chan)
-{
-	int page, offset;
-	int i;
-
-	DPRINTK ("ENTER\n");
-
-
-	chan->intmask = 0;
-	if(card->intmask)
-		chan->intmask = 0x23;	/* Turn on the IRQ bits */
-		
-	if (chan->sgtable != NULL) {
-		DPRINTK ("EXIT\n");
-		return 0;
-	}
-
-	/* alloc DMA-able memory for scatter-gather table */
-	chan->sgtable = pci_alloc_consistent (card->pdev,
-		(sizeof (struct via_sgd_table) * chan->frag_number),
-		&chan->sgt_handle);
-	if (!chan->sgtable) {
-		printk (KERN_ERR PFX "DMA table alloc fail, aborting\n");
-		DPRINTK ("EXIT\n");
-		return -ENOMEM;
-	}
-
-	memset ((void*)chan->sgtable, 0,
-		(sizeof (struct via_sgd_table) * chan->frag_number));
-
-	/* alloc DMA-able memory for scatter-gather buffers */
-
-	chan->page_number = (chan->frag_number * chan->frag_size) / PAGE_SIZE +
-			    (((chan->frag_number * chan->frag_size) % PAGE_SIZE) ? 1 : 0);
-
-	for (i = 0; i < chan->page_number; i++) {
-		chan->pgtbl[i].cpuaddr = pci_alloc_consistent (card->pdev, PAGE_SIZE,
-					      &chan->pgtbl[i].handle);
-
-		if (!chan->pgtbl[i].cpuaddr) {
-			chan->page_number = i;
-			goto err_out_nomem;
-		}
-
-#ifndef VIA_NDEBUG
-                memset (chan->pgtbl[i].cpuaddr, 0xBC, chan->frag_size);
-#endif
-
-#if 1
-                DPRINTK ("dmabuf_pg #%d (h=%lx, v2p=%lx, a=%p)\n",
-			i, (long)chan->pgtbl[i].handle,
-			virt_to_phys(chan->pgtbl[i].cpuaddr),
-			chan->pgtbl[i].cpuaddr);
-#endif
-	}
-
-	for (i = 0; i < chan->frag_number; i++) {
-
-		page = i / (PAGE_SIZE / chan->frag_size);
-		offset = (i % (PAGE_SIZE / chan->frag_size)) * chan->frag_size;
-
-		chan->sgtable[i].count = cpu_to_le32 (chan->frag_size | VIA_FLAG);
-		chan->sgtable[i].addr = cpu_to_le32 (chan->pgtbl[page].handle + offset);
-
-#if 1
-		DPRINTK ("dmabuf #%d (32(h)=%lx)\n",
-			 i,
-			 (long)chan->sgtable[i].addr);
-#endif
-	}
-
-	/* overwrite the last buffer information */
-	chan->sgtable[chan->frag_number - 1].count = cpu_to_le32 (chan->frag_size | VIA_EOL);
-
-	/* set location of DMA-able scatter-gather info table */
-	DPRINTK ("outl (0x%X, 0x%04lX)\n",
-		chan->sgt_handle, chan->iobase + VIA_PCM_TABLE_ADDR);
-
-	via_ac97_wait_idle (card);
-	outl (chan->sgt_handle, chan->iobase + VIA_PCM_TABLE_ADDR);
-	udelay (20);
-	via_ac97_wait_idle (card);
-	/* load no rate adaption, stereo 16bit, set up ring slots */
-	if(card->sixchannel)
-	{
-		if(!chan->is_multi)
-		{
-			outl (0xFFFFF | (0x3 << 20) | (chan->frag_number << 24), chan->iobase + VIA_PCM_STOPRATE);
-			udelay (20);
-			via_ac97_wait_idle (card);
-		}
-	}
-
-	DPRINTK ("inl (0x%lX) = %x\n",
-		chan->iobase + VIA_PCM_TABLE_ADDR,
-		inl(chan->iobase + VIA_PCM_TABLE_ADDR));
-
-	DPRINTK ("EXIT\n");
-	return 0;
-
-err_out_nomem:
-	printk (KERN_ERR PFX "DMA buffer alloc fail, aborting\n");
-	via_chan_buffer_free (card, chan);
-	DPRINTK ("EXIT\n");
-	return -ENOMEM;
-}
-
-
-/**
- *	via_chan_free - Release a PCM channel
- *	@card: Private audio chip info
- *	@chan: Channel to be released
- *
- *	Performs all the functions necessary to clean up
- *	an initialized channel.
- *
- *	Currently these functions include disabled any
- *	active DMA operations, setting the PCM channel
- *	back to a known state, and releasing any allocated
- *	sound buffers.
- */
-
-static void via_chan_free (struct via_info *card, struct via_channel *chan)
-{
-	DPRINTK ("ENTER\n");
-
-	spin_lock_irq (&card->lock);
-
-	/* stop any existing channel output */
-	via_chan_status_clear (chan->iobase);
-	via_chan_stop (chan->iobase);
-	via_chan_status_clear (chan->iobase);
-
-	spin_unlock_irq (&card->lock);
-
-	synchronize_irq(card->pdev->irq);
-
-	DPRINTK ("EXIT\n");
-}
-
-static void via_chan_buffer_free (struct via_info *card, struct via_channel *chan)
-{
-	int i;
-
-        DPRINTK ("ENTER\n");
-
-	/* zero location of DMA-able scatter-gather info table */
-	via_ac97_wait_idle(card);
-	outl (0, chan->iobase + VIA_PCM_TABLE_ADDR);
-
-	for (i = 0; i < chan->page_number; i++)
-		if (chan->pgtbl[i].cpuaddr) {
-			pci_free_consistent (card->pdev, PAGE_SIZE,
-					     chan->pgtbl[i].cpuaddr,
-					     chan->pgtbl[i].handle);
-			chan->pgtbl[i].cpuaddr = NULL;
-			chan->pgtbl[i].handle = 0;
-		}
-
-	chan->page_number = 0;
-
-	if (chan->sgtable) {
-		pci_free_consistent (card->pdev,
-			(sizeof (struct via_sgd_table) * chan->frag_number),
-			(void*)chan->sgtable, chan->sgt_handle);
-		chan->sgtable = NULL;
-	}
-
-	DPRINTK ("EXIT\n");
-}
-
-
-/**
- *	via_chan_pcm_fmt - Update PCM channel settings
- *	@chan: Channel to be updated
- *	@reset: Boolean.  If non-zero, channel will be reset
- *		to 8-bit mono mode.
- *
- *	Stores the settings of the current PCM format,
- *	8-bit or 16-bit, and mono/stereo, into the
- *	hardware settings for the specified channel.
- *	If @reset is non-zero, the channel is reset
- *	to 8-bit mono mode.  Otherwise, the channel
- *	is set to the values stored in the channel
- *	information struct @chan.
- */
-
-static void via_chan_pcm_fmt (struct via_channel *chan, int reset)
-{
-	DPRINTK ("ENTER, pcm_fmt=0x%02X, reset=%s\n",
-		 chan->pcm_fmt, reset ? "yes" : "no");
-
-	assert (chan != NULL);
-
-	if (reset)
-	{
-		/* reset to 8-bit mono mode */
-		chan->pcm_fmt = 0;
-		chan->channels = 1;
-	}
-
-	/* enable interrupts on FLAG and EOL */
-	chan->pcm_fmt |= VIA_CHAN_TYPE_MASK;
-
-	/* if we are recording, enable recording fifo bit */
-	if (chan->is_record)
-		chan->pcm_fmt |= VIA_PCM_REC_FIFO;
-	/* set interrupt select bits where applicable (PCM in & out channels) */
-	if (!chan->is_record)
-		chan->pcm_fmt |= VIA_CHAN_TYPE_INT_SELECT;
-	
-	DPRINTK("SET FMT - %02x %02x\n", chan->intmask , chan->is_multi);
-	
-	if(chan->intmask)
-	{
-		u32 m;
-
-		/*
-		 *	Channel 0x4 is up to 6 x 16bit and has to be
-		 *	programmed differently 
-		 */
-		 		
-		if(chan->is_multi)
-		{
-			u8 c = 0;
-			
-			/*
-			 *	Load the type bit for num channels
-			 *	and 8/16bit
-			 */
-			 
-			if(chan->pcm_fmt & VIA_PCM_FMT_16BIT)
-				c = 1 << 7;
-			if(chan->pcm_fmt & VIA_PCM_FMT_STEREO)
-				c |= (2<<4);
-			else
-				c |= (1<<4);
-				
-			outb(c, chan->iobase + VIA_PCM_TYPE);
-			
-			/*
-			 *	Set the channel steering
-			 *	Mono
-			 *		Channel 0 to slot 3
-			 *		Channel 0 to slot 4
-			 *	Stereo
-			 *		Channel 0 to slot 3
-			 *		Channel 1 to slot 4
-			 */
-			 
-			switch(chan->channels)
-			{
-				case 1:
-					outl(0xFF000000 | (1<<0) | (1<<4) , chan->iobase + VIA_PCM_STOPRATE);
-					break;
-				case 2:
-					outl(0xFF000000 | (1<<0) | (2<<4) , chan->iobase + VIA_PCM_STOPRATE);
-					break;
-				case 4:
-					outl(0xFF000000 | (1<<0) | (2<<4) | (3<<8) | (4<<12), chan->iobase + VIA_PCM_STOPRATE);
-					break;
-				case 6:
-					outl(0xFF000000 | (1<<0) | (2<<4) | (5<<8) | (6<<12) | (3<<16) | (4<<20), chan->iobase + VIA_PCM_STOPRATE);
-					break;
-			}				
-		}
-		else
-		{
-			/*
-			 *	New style, turn off channel volume
-			 *	control, set bits in the right register
-			 */	
-			outb(0x0, chan->iobase + VIA_PCM_LEFTVOL);
-			outb(0x0, chan->iobase + VIA_PCM_RIGHTVOL);
-
-			m = inl(chan->iobase + VIA_PCM_STOPRATE);
-			m &= ~(3<<20);
-			if(chan->pcm_fmt & VIA_PCM_FMT_STEREO)
-				m |= (1 << 20);
-			if(chan->pcm_fmt & VIA_PCM_FMT_16BIT)
-				m |= (1 << 21);
-			outl(m, chan->iobase + VIA_PCM_STOPRATE);
-		}		
-	}
-	else
-		outb (chan->pcm_fmt, chan->iobase + VIA_PCM_TYPE);
-
-
-	DPRINTK ("EXIT, pcm_fmt = 0x%02X, reg = 0x%02X\n",
-		 chan->pcm_fmt,
-		 inb (chan->iobase + VIA_PCM_TYPE));
-}
-
-
-/**
- *	via_chan_clear - Stop DMA channel operation, and reset pointers
- *	@card: the chip to accessed
- *	@chan: Channel to be cleared
- *
- *	Call via_chan_stop to halt DMA operations, and then resets
- *	all software pointers which track DMA operation.
- */
-
-static void via_chan_clear (struct via_info *card, struct via_channel *chan)
-{
-	DPRINTK ("ENTER\n");
-	via_chan_stop (chan->iobase);
-	via_chan_buffer_free(card, chan);
-	chan->is_active = 0;
-	chan->is_mapped = 0;
-	chan->is_enabled = 1;
-	chan->slop_len = 0;
-	chan->sw_ptr = 0;
-	chan->n_irqs = 0;
-	atomic_set (&chan->hw_ptr, 0);
-	DPRINTK ("EXIT\n");
-}
-
-
-/**
- *	via_chan_set_speed - Set PCM sample rate for given channel
- *	@card: Private info for specified board
- *	@chan: Channel whose sample rate will be adjusted
- *	@val: New sample rate, in Khz
- *
- *	Helper function for the %SNDCTL_DSP_SPEED ioctl.  OSS semantics
- *	demand that all audio operations halt (if they are not already
- *	halted) when the %SNDCTL_DSP_SPEED is given.
- *
- *	This function halts all audio operations for the given channel
- *	@chan, and then calls via_set_rate to set the audio hardware
- *	to the new rate.
- */
-
-static int via_chan_set_speed (struct via_info *card,
-			       struct via_channel *chan, int val)
-{
-	DPRINTK ("ENTER, requested rate = %d\n", val);
-
-	via_chan_clear (card, chan);
-
-	val = via_set_rate (card->ac97, chan, val);
-
-	DPRINTK ("EXIT, returning %d\n", val);
-	return val;
-}
-
-
-/**
- *	via_chan_set_fmt - Set PCM sample size for given channel
- *	@card: Private info for specified board
- *	@chan: Channel whose sample size will be adjusted
- *	@val: New sample size, use the %AFMT_xxx constants
- *
- *	Helper function for the %SNDCTL_DSP_SETFMT ioctl.  OSS semantics
- *	demand that all audio operations halt (if they are not already
- *	halted) when the %SNDCTL_DSP_SETFMT is given.
- *
- *	This function halts all audio operations for the given channel
- *	@chan, and then calls via_chan_pcm_fmt to set the audio hardware
- *	to the new sample size, either 8-bit or 16-bit.
- */
-
-static int via_chan_set_fmt (struct via_info *card,
-			     struct via_channel *chan, int val)
-{
-	DPRINTK ("ENTER, val=%s\n",
-		 val == AFMT_U8 ? "AFMT_U8" :
-	 	 val == AFMT_S16_LE ? "AFMT_S16_LE" :
-		 "unknown");
-
-	via_chan_clear (card, chan);
-
-	assert (val != AFMT_QUERY); /* this case is handled elsewhere */
-
-	switch (val) {
-	case AFMT_S16_LE:
-		if ((chan->pcm_fmt & VIA_PCM_FMT_16BIT) == 0) {
-			chan->pcm_fmt |= VIA_PCM_FMT_16BIT;
-			via_chan_pcm_fmt (chan, 0);
-		}
-		break;
-
-	case AFMT_U8:
-		if (chan->pcm_fmt & VIA_PCM_FMT_16BIT) {
-			chan->pcm_fmt &= ~VIA_PCM_FMT_16BIT;
-			via_chan_pcm_fmt (chan, 0);
-		}
-		break;
-
-	default:
-		DPRINTK ("unknown AFMT: 0x%X\n", val);
-		val = AFMT_S16_LE;
-	}
-
-	DPRINTK ("EXIT\n");
-	return val;
-}
-
-
-/**
- *	via_chan_set_stereo - Enable or disable stereo for a DMA channel
- *	@card: Private info for specified board
- *	@chan: Channel whose stereo setting will be adjusted
- *	@val: New sample size, use the %AFMT_xxx constants
- *
- *	Helper function for the %SNDCTL_DSP_CHANNELS and %SNDCTL_DSP_STEREO ioctls.  OSS semantics
- *	demand that all audio operations halt (if they are not already
- *	halted) when %SNDCTL_DSP_CHANNELS or SNDCTL_DSP_STEREO is given.
- *
- *	This function halts all audio operations for the given channel
- *	@chan, and then calls via_chan_pcm_fmt to set the audio hardware
- *	to enable or disable stereo.
- */
-
-static int via_chan_set_stereo (struct via_info *card,
-			        struct via_channel *chan, int val)
-{
-	DPRINTK ("ENTER, channels = %d\n", val);
-
-	via_chan_clear (card, chan);
-
-	switch (val) {
-
-	/* mono */
-	case 1:
-		chan->pcm_fmt &= ~VIA_PCM_FMT_STEREO;
-		chan->channels = 1;
-		via_chan_pcm_fmt (chan, 0);
-		break;
-
-	/* stereo */
-	case 2:
-		chan->pcm_fmt |= VIA_PCM_FMT_STEREO;
-		chan->channels = 2;
-		via_chan_pcm_fmt (chan, 0);
-		break;
-
-	case 4:
-	case 6:
-		if(chan->is_multi)
-		{
-			chan->pcm_fmt |= VIA_PCM_FMT_STEREO;
-			chan->channels = val;
-			break;
-		}
-	/* unknown */
-	default:
-		val = -EINVAL;
-		break;
-	}
-
-	DPRINTK ("EXIT, returning %d\n", val);
-	return val;
-}
-
-static int via_chan_set_buffering (struct via_info *card,
-                                struct via_channel *chan, int val)
-{
-	int shift;
-
-        DPRINTK ("ENTER\n");
-
-	/* in both cases the buffer cannot be changed */
-	if (chan->is_active || chan->is_mapped) {
-		DPRINTK ("EXIT\n");
-		return -EINVAL;
-	}
-
-	/* called outside SETFRAGMENT */
-	/* set defaults or do nothing */
-	if (val < 0) {
-
-		if (chan->frag_size && chan->frag_number)
-			goto out;
-
-		DPRINTK ("\n");
-
-		chan->frag_size = (VIA_DEFAULT_FRAG_TIME * chan->rate * chan->channels
-				   * ((chan->pcm_fmt & VIA_PCM_FMT_16BIT) ? 2 : 1)) / 1000 - 1;
-
-		shift = 0;
-		while (chan->frag_size) {
-			chan->frag_size >>= 1;
-			shift++;
-		}
-		chan->frag_size = 1 << shift;
-
-		chan->frag_number = (VIA_DEFAULT_BUFFER_TIME / VIA_DEFAULT_FRAG_TIME);
-
-		DPRINTK ("setting default values %d %d\n", chan->frag_size, chan->frag_number);
-	} else {
-		chan->frag_size = 1 << (val & 0xFFFF);
-		chan->frag_number = (val >> 16) & 0xFFFF;
-
-		DPRINTK ("using user values %d %d\n", chan->frag_size, chan->frag_number);
-	}
-
-	/* quake3 wants frag_number to be a power of two */
-	shift = 0;
-	while (chan->frag_number) {
-		chan->frag_number >>= 1;
-		shift++;
-	}
-	chan->frag_number = 1 << shift;
-
-	if (chan->frag_size > VIA_MAX_FRAG_SIZE)
-		chan->frag_size = VIA_MAX_FRAG_SIZE;
-	else if (chan->frag_size < VIA_MIN_FRAG_SIZE)
-		chan->frag_size = VIA_MIN_FRAG_SIZE;
-
-	if (chan->frag_number < VIA_MIN_FRAG_NUMBER)
-                chan->frag_number = VIA_MIN_FRAG_NUMBER;
-        if (chan->frag_number > VIA_MAX_FRAG_NUMBER)
-        	chan->frag_number = VIA_MAX_FRAG_NUMBER;
-
-	if ((chan->frag_number * chan->frag_size) / PAGE_SIZE > VIA_MAX_BUFFER_DMA_PAGES)
-		chan->frag_number = (VIA_MAX_BUFFER_DMA_PAGES * PAGE_SIZE) / chan->frag_size;
-
-out:
-	if (chan->is_record)
-		atomic_set (&chan->n_frags, 0);
-	else
-		atomic_set (&chan->n_frags, chan->frag_number);
-
-	DPRINTK ("EXIT\n");
-
-	return 0;
-}
-
-#ifdef VIA_CHAN_DUMP_BUFS
-/**
- *	via_chan_dump_bufs - Display DMA table contents
- *	@chan: Channel whose DMA table will be displayed
- *
- *	Debugging function which displays the contents of the
- *	scatter-gather DMA table for the given channel @chan.
- */
-
-static void via_chan_dump_bufs (struct via_channel *chan)
-{
-	int i;
-
-	for (i = 0; i < chan->frag_number; i++) {
-		DPRINTK ("#%02d: addr=%x, count=%u, flag=%d, eol=%d\n",
-			 i, chan->sgtable[i].addr,
-			 chan->sgtable[i].count & 0x00FFFFFF,
-			 chan->sgtable[i].count & VIA_FLAG ? 1 : 0,
-			 chan->sgtable[i].count & VIA_EOL ? 1 : 0);
-	}
-	DPRINTK ("buf_in_use = %d, nextbuf = %d\n",
-		 atomic_read (&chan->buf_in_use),
-		 atomic_read (&chan->sw_ptr));
-}
-#endif /* VIA_CHAN_DUMP_BUFS */
-
-
-/**
- *	via_chan_flush_frag - Flush partially-full playback buffer to hardware
- *	@chan: Channel whose DMA table will be flushed
- *
- *	Flushes partially-full playback buffer to hardware.
- */
-
-static void via_chan_flush_frag (struct via_channel *chan)
-{
-	DPRINTK ("ENTER\n");
-
-	assert (chan->slop_len > 0);
-
-	if (chan->sw_ptr == (chan->frag_number - 1))
-		chan->sw_ptr = 0;
-	else
-		chan->sw_ptr++;
-
-	chan->slop_len = 0;
-
-	assert (atomic_read (&chan->n_frags) > 0);
-	atomic_dec (&chan->n_frags);
-
-	DPRINTK ("EXIT\n");
-}
-
-
-
-/**
- *	via_chan_maybe_start - Initiate audio hardware DMA operation
- *	@chan: Channel whose DMA is to be started
- *
- *	Initiate DMA operation, if the DMA engine for the given
- *	channel @chan is not already active.
- */
-
-static inline void via_chan_maybe_start (struct via_channel *chan)
-{
-	assert (chan->is_active == sg_active(chan->iobase));
-
-	DPRINTK ("MAYBE START %s\n", chan->name);
-	if (!chan->is_active && chan->is_enabled) {
-		chan->is_active = 1;
-		sg_begin (chan);
-		DPRINTK ("starting channel %s\n", chan->name);
-	}
-}
-
-
-/****************************************************************
- *
- * Interface to ac97-codec module
- *
- *
- */
-
-/**
- *	via_ac97_wait_idle - Wait until AC97 codec is not busy
- *	@card: Private info for specified board
- *
- *	Sleep until the AC97 codec is no longer busy.
- *	Returns the final value read from the SGD
- *	register being polled.
- */
-
-static u8 via_ac97_wait_idle (struct via_info *card)
-{
-	u8 tmp8;
-	int counter = VIA_COUNTER_LIMIT;
-
-	DPRINTK ("ENTER/EXIT\n");
-
-	assert (card != NULL);
-	assert (card->pdev != NULL);
-
-	do {
-		udelay (15);
-
-		tmp8 = inb (card->baseaddr + 0x83);
-	} while ((tmp8 & VIA_CR83_BUSY) && (counter-- > 0));
-
-	if (tmp8 & VIA_CR83_BUSY)
-		printk (KERN_WARNING PFX "timeout waiting on AC97 codec\n");
-	return tmp8;
-}
-
-
-/**
- *	via_ac97_read_reg - Read AC97 standard register
- *	@codec: Pointer to generic AC97 codec info
- *	@reg: Index of AC97 register to be read
- *
- *	Read the value of a single AC97 codec register,
- *	as defined by the Intel AC97 specification.
- *
- *	Defines the standard AC97 read-register operation
- *	required by the kernel's ac97_codec interface.
- *
- *	Returns the 16-bit value stored in the specified
- *	register.
- */
-
-static u16 via_ac97_read_reg (struct ac97_codec *codec, u8 reg)
-{
-	unsigned long data;
-	struct via_info *card;
-	int counter;
-
-	DPRINTK ("ENTER\n");
-
-	assert (codec != NULL);
-	assert (codec->private_data != NULL);
-
-	card = codec->private_data;
-	
-	spin_lock(&card->ac97_lock);
-
-	/* Every time we write to register 80 we cause a transaction.
-	   The only safe way to clear the valid bit is to write it at
-	   the same time as the command */
-	data = (reg << 16) | VIA_CR80_READ | VIA_CR80_VALID;
-
-	outl (data, card->baseaddr + VIA_BASE0_AC97_CTRL);
-	udelay (20);
-
-	for (counter = VIA_COUNTER_LIMIT; counter > 0; counter--) {
-		udelay (1);
-		if ((((data = inl(card->baseaddr + VIA_BASE0_AC97_CTRL)) &
-		      (VIA_CR80_VALID|VIA_CR80_BUSY)) == VIA_CR80_VALID))
-			goto out;
-	}
-
-	printk (KERN_WARNING PFX "timeout while reading AC97 codec (0x%lX)\n", data);
-	goto err_out;
-
-out:
-	/* Once the valid bit has become set, we must wait a complete AC97
-	   frame before the data has settled. */
-	udelay(25);
-	data = (unsigned long) inl (card->baseaddr + VIA_BASE0_AC97_CTRL);
-
-	outb (0x02, card->baseaddr + 0x83);
-
-	if (((data & 0x007F0000) >> 16) == reg) {
-		DPRINTK ("EXIT, success, data=0x%lx, retval=0x%lx\n",
-			 data, data & 0x0000FFFF);
-		spin_unlock(&card->ac97_lock);
-		return data & 0x0000FFFF;
-	}
-
-	printk (KERN_WARNING "via82cxxx_audio: not our index: reg=0x%x, newreg=0x%lx\n",
-		reg, ((data & 0x007F0000) >> 16));
-
-err_out:
-	spin_unlock(&card->ac97_lock);
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-}
-
-
-/**
- *	via_ac97_write_reg - Write AC97 standard register
- *	@codec: Pointer to generic AC97 codec info
- *	@reg: Index of AC97 register to be written
- *	@value: Value to be written to AC97 register
- *
- *	Write the value of a single AC97 codec register,
- *	as defined by the Intel AC97 specification.
- *
- *	Defines the standard AC97 write-register operation
- *	required by the kernel's ac97_codec interface.
- */
-
-static void via_ac97_write_reg (struct ac97_codec *codec, u8 reg, u16 value)
-{
-	u32 data;
-	struct via_info *card;
-	int counter;
-
-	DPRINTK ("ENTER\n");
-
-	assert (codec != NULL);
-	assert (codec->private_data != NULL);
-
-	card = codec->private_data;
-
-	spin_lock(&card->ac97_lock);
-	
-	data = (reg << 16) + value;
-	outl (data, card->baseaddr + VIA_BASE0_AC97_CTRL);
-	udelay (10);
-
-	for (counter = VIA_COUNTER_LIMIT; counter > 0; counter--) {
-		if ((inb (card->baseaddr + 0x83) & VIA_CR83_BUSY) == 0)
-			goto out;
-
-		udelay (15);
-	}
-
-	printk (KERN_WARNING PFX "timeout after AC97 codec write (0x%X, 0x%X)\n", reg, value);
-
-out:
-	spin_unlock(&card->ac97_lock);
-	DPRINTK ("EXIT\n");
-}
-
-
-static int via_mixer_open (struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	struct via_info *card;
-	struct pci_dev *pdev = NULL;
-	struct pci_driver *drvr;
-
-	DPRINTK ("ENTER\n");
-
-	while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
-		drvr = pci_dev_driver (pdev);
-		if (drvr == &via_driver) {
-			assert (pci_get_drvdata (pdev) != NULL);
-
-			card = pci_get_drvdata (pdev);
-			if (card->ac97->dev_mixer == minor)
-				goto match;
-		}
-	}
-
-	DPRINTK ("EXIT, returning -ENODEV\n");
-	return -ENODEV;
-
-match:
-	pci_dev_put(pdev);
-	file->private_data = card->ac97;
-
-	DPRINTK ("EXIT, returning 0\n");
-	return nonseekable_open(inode, file);
-}
-
-static int via_mixer_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
-			    unsigned long arg)
-{
-	struct ac97_codec *codec = file->private_data;
-	struct via_info *card;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-	int rc;
-
-	DPRINTK ("ENTER\n");
-
-	assert (codec != NULL);
-	card = codec->private_data;
-	assert (card != NULL);
-
-	rc = via_syscall_down (card, nonblock);
-	if (rc) goto out;
-	
-#if 0
-	/*
-	 *	Intercept volume control on 8233 and 8235
-	 */
-	if(card->volume)
-	{
-		switch(cmd)
-		{
-			case SOUND_MIXER_READ_VOLUME:
-				return card->mixer_vol;
-			case SOUND_MIXER_WRITE_VOLUME:
-			{
-				int v;
-				if(get_user(v, (int *)arg))
-				{
-					rc = -EFAULT;
-					goto out;
-				}
-				card->mixer_vol = v;
-			}
-		}
-	}		
-#endif
-	rc = codec->mixer_ioctl(codec, cmd, arg);
-
-	mutex_unlock(&card->syscall_mutex);
-
-out:
-	DPRINTK ("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-
-static const struct file_operations via_mixer_fops = {
-	.owner		= THIS_MODULE,
-	.open		= via_mixer_open,
-	.llseek		= no_llseek,
-	.ioctl		= via_mixer_ioctl,
-};
-
-
-static int __devinit via_ac97_reset (struct via_info *card)
-{
-	struct pci_dev *pdev = card->pdev;
-	u8 tmp8;
-	u16 tmp16;
-
-	DPRINTK ("ENTER\n");
-
-	assert (pdev != NULL);
-
-#ifndef NDEBUG
-	{
-		u8 r40,r41,r42,r43,r44,r48;
-		pci_read_config_byte (card->pdev, 0x40, &r40);
-		pci_read_config_byte (card->pdev, 0x41, &r41);
-		pci_read_config_byte (card->pdev, 0x42, &r42);
-		pci_read_config_byte (card->pdev, 0x43, &r43);
-		pci_read_config_byte (card->pdev, 0x44, &r44);
-		pci_read_config_byte (card->pdev, 0x48, &r48);
-		DPRINTK ("PCI config: %02X %02X %02X %02X %02X %02X\n",
-			r40,r41,r42,r43,r44,r48);
-
-		spin_lock_irq (&card->lock);
-		DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n",
-			 inb (card->baseaddr + 0x00),
-			 inb (card->baseaddr + 0x01),
-			 inb (card->baseaddr + 0x02),
-			 inl (card->baseaddr + 0x04),
-			 inl (card->baseaddr + 0x0C),
-			 inl (card->baseaddr + 0x80),
-			 inl (card->baseaddr + 0x84));
-		spin_unlock_irq (&card->lock);
-
-	}
-#endif
-
-        /*
-         * Reset AC97 controller: enable, disable, enable,
-         * pausing after each command for good luck.  Only
-	 * do this if the codec is not ready, because it causes
-	 * loud pops and such due to such a hard codec reset.
-         */
-	pci_read_config_byte (pdev, VIA_ACLINK_STATUS, &tmp8);
-	if ((tmp8 & VIA_CR40_AC97_READY) == 0) {
-        	pci_write_config_byte (pdev, VIA_ACLINK_CTRL,
-				       VIA_CR41_AC97_ENABLE |
-                		       VIA_CR41_AC97_RESET |
-				       VIA_CR41_AC97_WAKEUP);
-        	udelay (100);
-
-        	pci_write_config_byte (pdev, VIA_ACLINK_CTRL, 0);
-        	udelay (100);
-
-        	pci_write_config_byte (pdev, VIA_ACLINK_CTRL,
-				       VIA_CR41_AC97_ENABLE |
-				       VIA_CR41_PCM_ENABLE |
-                		       VIA_CR41_VRA | VIA_CR41_AC97_RESET);
-        	udelay (100);
-	}
-
-	/* Make sure VRA is enabled, in case we didn't do a
-	 * complete codec reset, above
-	 */
-	pci_read_config_byte (pdev, VIA_ACLINK_CTRL, &tmp8);
-	if (((tmp8 & VIA_CR41_VRA) == 0) ||
-	    ((tmp8 & VIA_CR41_AC97_ENABLE) == 0) ||
-	    ((tmp8 & VIA_CR41_PCM_ENABLE) == 0) ||
-	    ((tmp8 & VIA_CR41_AC97_RESET) == 0)) {
-        	pci_write_config_byte (pdev, VIA_ACLINK_CTRL,
-				       VIA_CR41_AC97_ENABLE |
-				       VIA_CR41_PCM_ENABLE |
-                		       VIA_CR41_VRA | VIA_CR41_AC97_RESET);
-        	udelay (100);
-	}
-
-	if(card->legacy)
-	{
-#if 0 /* this breaks on K7M */
-		/* disable legacy stuff */
-		pci_write_config_byte (pdev, 0x42, 0x00);
-		udelay(10);
-#endif
-
-		/* route FM trap to IRQ, disable FM trap */
-		pci_write_config_byte (pdev, 0x48, 0x05);
-		udelay(10);
-	}
-	
-	/* disable all codec GPI interrupts */
-	outl (0, pci_resource_start (pdev, 0) + 0x8C);
-
-	/* WARNING: this line is magic.  Remove this
-	 * and things break. */
-	/* enable variable rate */
- 	tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS);
- 	if ((tmp16 & 1) == 0)
- 		via_ac97_write_reg (card->ac97, AC97_EXTENDED_STATUS, tmp16 | 1);
-
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-}
-
-
-static void via_ac97_codec_wait (struct ac97_codec *codec)
-{
-	assert (codec->private_data != NULL);
-	via_ac97_wait_idle (codec->private_data);
-}
-
-
-static int __devinit via_ac97_init (struct via_info *card)
-{
-	int rc;
-	u16 tmp16;
-
-	DPRINTK ("ENTER\n");
-
-	assert (card != NULL);
-
-	card->ac97 = ac97_alloc_codec();
-	if(card->ac97 == NULL)
-		return -ENOMEM;
-		
-	card->ac97->private_data = card;
-	card->ac97->codec_read = via_ac97_read_reg;
-	card->ac97->codec_write = via_ac97_write_reg;
-	card->ac97->codec_wait = via_ac97_codec_wait;
-
-	card->ac97->dev_mixer = register_sound_mixer (&via_mixer_fops, -1);
-	if (card->ac97->dev_mixer < 0) {
-		printk (KERN_ERR PFX "unable to register AC97 mixer, aborting\n");
-		DPRINTK ("EXIT, returning -EIO\n");
-		ac97_release_codec(card->ac97);
-		return -EIO;
-	}
-
-	rc = via_ac97_reset (card);
-	if (rc) {
-		printk (KERN_ERR PFX "unable to reset AC97 codec, aborting\n");
-		goto err_out;
-	}
-	
-	mdelay(10);
-	
-	if (ac97_probe_codec (card->ac97) == 0) {
-		printk (KERN_ERR PFX "unable to probe AC97 codec, aborting\n");
-		rc = -EIO;
-		goto err_out;
-	}
-
-	/* enable variable rate */
-	tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS);
-	via_ac97_write_reg (card->ac97, AC97_EXTENDED_STATUS, tmp16 | 1);
-
- 	/*
- 	 * If we cannot enable VRA, we have a locked-rate codec.
- 	 * We try again to enable VRA before assuming so, however.
- 	 */
- 	tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS);
- 	if ((tmp16 & 1) == 0) {
- 		via_ac97_write_reg (card->ac97, AC97_EXTENDED_STATUS, tmp16 | 1);
- 		tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS);
- 		if ((tmp16 & 1) == 0) {
- 			card->locked_rate = 1;
- 			printk (KERN_WARNING PFX "Codec rate locked at 48Khz\n");
- 		}
- 	}
-
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-
-err_out:
-	unregister_sound_mixer (card->ac97->dev_mixer);
-	DPRINTK ("EXIT, returning %d\n", rc);
-	ac97_release_codec(card->ac97);
-	return rc;
-}
-
-
-static void via_ac97_cleanup (struct via_info *card)
-{
-	DPRINTK ("ENTER\n");
-
-	assert (card != NULL);
-	assert (card->ac97->dev_mixer >= 0);
-
-	unregister_sound_mixer (card->ac97->dev_mixer);
-	ac97_release_codec(card->ac97);
-
-	DPRINTK ("EXIT\n");
-}
-
-
-
-/****************************************************************
- *
- * Interrupt-related code
- *
- */
-
-/**
- *	via_intr_channel - handle an interrupt for a single channel
- *      @card: unused
- *	@chan: handle interrupt for this channel
- *
- *	This is the "meat" of the interrupt handler,
- *	containing the actions taken each time an interrupt
- *	occurs.  All communication and coordination with
- *	userspace takes place here.
- *
- *	Locking: inside card->lock
- */
-
-static void via_intr_channel (struct via_info *card, struct via_channel *chan)
-{
-	u8 status;
-	int n;
-	
-	/* check pertinent bits of status register for action bits */
-	status = inb (chan->iobase) & (VIA_SGD_FLAG | VIA_SGD_EOL | VIA_SGD_STOPPED);
-	if (!status)
-		return;
-
-	/* acknowledge any flagged bits ASAP */
-	outb (status, chan->iobase);
-
-	if (!chan->sgtable) /* XXX: temporary solution */
-		return;
-
-	/* grab current h/w ptr value */
-	n = atomic_read (&chan->hw_ptr);
-
-	/* sanity check: make sure our h/w ptr doesn't have a weird value */
-	assert (n >= 0);
-	assert (n < chan->frag_number);
-
-	
-	/* reset SGD data structure in memory to reflect a full buffer,
-	 * and advance the h/w ptr, wrapping around to zero if needed
-	 */
-	if (n == (chan->frag_number - 1)) {
-		chan->sgtable[n].count = cpu_to_le32(chan->frag_size | VIA_EOL);
-		atomic_set (&chan->hw_ptr, 0);
-	} else {
-		chan->sgtable[n].count = cpu_to_le32(chan->frag_size | VIA_FLAG);
-		atomic_inc (&chan->hw_ptr);
-	}
-
-	/* accounting crap for SNDCTL_DSP_GETxPTR */
-	chan->n_irqs++;
-	chan->bytes += chan->frag_size;
-	/* FIXME - signed overflow is undefined */
-	if (chan->bytes < 0) /* handle overflow of 31-bit value */
-		chan->bytes = chan->frag_size;
-	/* all following checks only occur when not in mmap(2) mode */
-	if (!chan->is_mapped)
-	{
-		/* If we are recording, then n_frags represents the number
-		 * of fragments waiting to be handled by userspace.
-		 * If we are playback, then n_frags represents the number
-		 * of fragments remaining to be filled by userspace.
-		 * We increment here.  If we reach max number of fragments,
-		 * this indicates an underrun/overrun.  For this case under OSS,
-		 * we stop the record/playback process.
-		 */
-		if (atomic_read (&chan->n_frags) < chan->frag_number)
-			atomic_inc (&chan->n_frags);
-		assert (atomic_read (&chan->n_frags) <= chan->frag_number);
-		if (atomic_read (&chan->n_frags) == chan->frag_number) {
-			chan->is_active = 0;
-			via_chan_stop (chan->iobase);
-		}
-	}
-	/* wake up anyone listening to see when interrupts occur */
-	wake_up_all (&chan->wait);
-
-	DPRINTK ("%s intr, status=0x%02X, hwptr=0x%lX, chan->hw_ptr=%d\n",
-		 chan->name, status, (long) inl (chan->iobase + 0x04),
-		 atomic_read (&chan->hw_ptr));
-
-	DPRINTK ("%s intr, channel n_frags == %d, missed %d\n", chan->name,
-		 atomic_read (&chan->n_frags), missed);
-}
-
-
-static irqreturn_t  via_interrupt(int irq, void *dev_id)
-{
-	struct via_info *card = dev_id;
-	u32 status32;
-
-	/* to minimize interrupt sharing costs, we use the SGD status
-	 * shadow register to check the status of all inputs and
-	 * outputs with a single 32-bit bus read.  If no interrupt
-	 * conditions are flagged, we exit immediately
-	 */
-	status32 = inl (card->baseaddr + VIA_BASE0_SGD_STATUS_SHADOW);
-	if (!(status32 & VIA_INTR_MASK))
-        {
-#ifdef CONFIG_MIDI_VIA82CXXX
-	    	 if (card->midi_devc)
-                    	uart401intr(irq, card->midi_devc);
-#endif
-		return IRQ_HANDLED;
-    	}
-	DPRINTK ("intr, status32 == 0x%08X\n", status32);
-
-	/* synchronize interrupt handling under SMP.  this spinlock
-	 * goes away completely on UP
-	 */
-	spin_lock (&card->lock);
-
-	if (status32 & VIA_INTR_OUT)
-		via_intr_channel (card, &card->ch_out);
-	if (status32 & VIA_INTR_IN)
-		via_intr_channel (card, &card->ch_in);
-	if (status32 & VIA_INTR_FM)
-		via_intr_channel (card, &card->ch_fm);
-
-	spin_unlock (&card->lock);
-	
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t via_new_interrupt(int irq, void *dev_id)
-{
-	struct via_info *card = dev_id;
-	u32 status32;
-
-	/* to minimize interrupt sharing costs, we use the SGD status
-	 * shadow register to check the status of all inputs and
-	 * outputs with a single 32-bit bus read.  If no interrupt
-	 * conditions are flagged, we exit immediately
-	 */
-	status32 = inl (card->baseaddr + VIA_BASE0_SGD_STATUS_SHADOW);
-	if (!(status32 & VIA_NEW_INTR_MASK))
-		return IRQ_NONE;
-	/*
-	 * goes away completely on UP
-	 */
-	spin_lock (&card->lock);
-
-	via_intr_channel (card, &card->ch_out);
-	via_intr_channel (card, &card->ch_in);
-	via_intr_channel (card, &card->ch_fm);
-
-	spin_unlock (&card->lock);
-	return IRQ_HANDLED;
-}
-
-
-/**
- *	via_interrupt_init - Initialize interrupt handling
- *	@card: Private info for specified board
- *
- *	Obtain and reserve IRQ for using in handling audio events.
- *	Also, disable any IRQ-generating resources, to make sure
- *	we don't get interrupts before we want them.
- */
-
-static int via_interrupt_init (struct via_info *card)
-{
-	u8 tmp8;
-
-	DPRINTK ("ENTER\n");
-
-	assert (card != NULL);
-	assert (card->pdev != NULL);
-
-	/* check for sane IRQ number. can this ever happen? */
-	if (card->pdev->irq < 2) {
-		printk (KERN_ERR PFX "insane IRQ %d, aborting\n",
-			card->pdev->irq);
-		DPRINTK ("EXIT, returning -EIO\n");
-		return -EIO;
-	}
-
-	/* VIA requires this is done */
-	pci_write_config_byte(card->pdev, PCI_INTERRUPT_LINE, card->pdev->irq);
-	
-	if(card->legacy)
-	{
-		/* make sure FM irq is not routed to us */
-		pci_read_config_byte (card->pdev, VIA_FM_NMI_CTRL, &tmp8);
-		if ((tmp8 & VIA_CR48_FM_TRAP_TO_NMI) == 0) {
-			tmp8 |= VIA_CR48_FM_TRAP_TO_NMI;
-			pci_write_config_byte (card->pdev, VIA_FM_NMI_CTRL, tmp8);
-		}
-		if (request_irq (card->pdev->irq, via_interrupt, IRQF_SHARED, VIA_MODULE_NAME, card)) {
-			printk (KERN_ERR PFX "unable to obtain IRQ %d, aborting\n",
-				card->pdev->irq);
-			DPRINTK ("EXIT, returning -EBUSY\n");
-			return -EBUSY;
-		}
-	}
-	else 
-	{
-		if (request_irq (card->pdev->irq, via_new_interrupt, IRQF_SHARED, VIA_MODULE_NAME, card)) {
-			printk (KERN_ERR PFX "unable to obtain IRQ %d, aborting\n",
-				card->pdev->irq);
-			DPRINTK ("EXIT, returning -EBUSY\n");
-			return -EBUSY;
-		}
-	}
-
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-}
-
-
-/****************************************************************
- *
- * OSS DSP device
- *
- */
-
-static const struct file_operations via_dsp_fops = {
-	.owner		= THIS_MODULE,
-	.open		= via_dsp_open,
-	.release	= via_dsp_release,
-	.read		= via_dsp_read,
-	.write		= via_dsp_write,
-	.poll		= via_dsp_poll,
-	.llseek		= no_llseek,
-	.ioctl		= via_dsp_ioctl,
-	.mmap		= via_dsp_mmap,
-};
-
-
-static int __devinit via_dsp_init (struct via_info *card)
-{
-	u8 tmp8;
-
-	DPRINTK ("ENTER\n");
-
-	assert (card != NULL);
-
-	if(card->legacy)
-	{
-		/* turn off legacy features, if not already */
-		pci_read_config_byte (card->pdev, VIA_FUNC_ENABLE, &tmp8);
-		if (tmp8 & (VIA_CR42_SB_ENABLE |  VIA_CR42_FM_ENABLE)) {
-			tmp8 &= ~(VIA_CR42_SB_ENABLE | VIA_CR42_FM_ENABLE);
-			pci_write_config_byte (card->pdev, VIA_FUNC_ENABLE, tmp8);
-		}
-	}
-
-	via_stop_everything (card);
-
-	card->dev_dsp = register_sound_dsp (&via_dsp_fops, -1);
-	if (card->dev_dsp < 0) {
-		DPRINTK ("EXIT, returning -ENODEV\n");
-		return -ENODEV;
-	}
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-}
-
-
-static void via_dsp_cleanup (struct via_info *card)
-{
-	DPRINTK ("ENTER\n");
-
-	assert (card != NULL);
-	assert (card->dev_dsp >= 0);
-
-	via_stop_everything (card);
-
-	unregister_sound_dsp (card->dev_dsp);
-
-	DPRINTK ("EXIT\n");
-}
-
-
-static struct page * via_mm_nopage (struct vm_area_struct * vma,
-				    unsigned long address, int *type)
-{
-	struct via_info *card = vma->vm_private_data;
-	struct via_channel *chan = &card->ch_out;
-	unsigned long max_bufs;
-	struct page *dmapage;
-	unsigned long pgoff;
-	int rd, wr;
-
-	DPRINTK ("ENTER, start %lXh, ofs %lXh, pgoff %ld, addr %lXh\n",
-		 vma->vm_start,
-		 address - vma->vm_start,
-		 (address - vma->vm_start) >> PAGE_SHIFT,
-		 address);
-
-        if (address > vma->vm_end) {
-		DPRINTK ("EXIT, returning NOPAGE_SIGBUS\n");
-		return NOPAGE_SIGBUS; /* Disallow mremap */
-	}
-        if (!card) {
-		DPRINTK ("EXIT, returning NOPAGE_SIGBUS\n");
-		return NOPAGE_SIGBUS;	/* Nothing allocated */
-	}
-
-	pgoff = vma->vm_pgoff + ((address - vma->vm_start) >> PAGE_SHIFT);
-	rd = card->ch_in.is_mapped;
-	wr = card->ch_out.is_mapped;
-
-	max_bufs = chan->frag_number;
-	if (rd && wr)
-		max_bufs *= 2;
-	if (pgoff >= max_bufs)
-		return NOPAGE_SIGBUS;
-
-	/* if full-duplex (read+write) and we have two sets of bufs,
-	 * then the playback buffers come first, sez soundcard.c */
-	if (pgoff >= chan->page_number) {
-		pgoff -= chan->page_number;
-		chan = &card->ch_in;
-	} else if (!wr)
-		chan = &card->ch_in;
-
-	assert ((((unsigned long)chan->pgtbl[pgoff].cpuaddr) % PAGE_SIZE) == 0);
-
-	dmapage = virt_to_page (chan->pgtbl[pgoff].cpuaddr);
-	DPRINTK ("EXIT, returning page %p for cpuaddr %lXh\n",
-		 dmapage, (unsigned long) chan->pgtbl[pgoff].cpuaddr);
-	get_page (dmapage);
-	if (type)
-		*type = VM_FAULT_MINOR;
-	return dmapage;
-}
-
-
-#ifndef VM_RESERVED
-static int via_mm_swapout (struct page *page, struct file *filp)
-{
-	return 0;
-}
-#endif /* VM_RESERVED */
-
-
-static struct vm_operations_struct via_mm_ops = {
-	.nopage		= via_mm_nopage,
-
-#ifndef VM_RESERVED
-	.swapout	= via_mm_swapout,
-#endif
-};
-
-
-static int via_dsp_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct via_info *card;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-	int rc = -EINVAL, rd=0, wr=0;
-	unsigned long max_size, size, start, offset;
-
-	assert (file != NULL);
-	assert (vma != NULL);
-	card = file->private_data;
-	assert (card != NULL);
-
-	DPRINTK ("ENTER, start %lXh, size %ld, pgoff %ld\n",
-		 vma->vm_start,
-		 vma->vm_end - vma->vm_start,
-		 vma->vm_pgoff);
-
-	max_size = 0;
-	if (vma->vm_flags & VM_READ) {
-		rd = 1;
-		via_chan_set_buffering(card, &card->ch_in, -1);
-		via_chan_buffer_init (card, &card->ch_in);
-		max_size += card->ch_in.page_number << PAGE_SHIFT;
-	}
-	if (vma->vm_flags & VM_WRITE) {
-		wr = 1;
-		via_chan_set_buffering(card, &card->ch_out, -1);
-		via_chan_buffer_init (card, &card->ch_out);
-		max_size += card->ch_out.page_number << PAGE_SHIFT;
-	}
-
-	start = vma->vm_start;
-	offset = (vma->vm_pgoff << PAGE_SHIFT);
-	size = vma->vm_end - vma->vm_start;
-
-	/* some basic size/offset sanity checks */
-	if (size > max_size)
-		goto out;
-	if (offset > max_size - size)
-		goto out;
-
-	rc = via_syscall_down (card, nonblock);
-	if (rc) goto out;
-
-	vma->vm_ops = &via_mm_ops;
-	vma->vm_private_data = card;
-
-#ifdef VM_RESERVED
-	vma->vm_flags |= VM_RESERVED;
-#endif
-
-	if (rd)
-		card->ch_in.is_mapped = 1;
-	if (wr)
-		card->ch_out.is_mapped = 1;
-
-	mutex_unlock(&card->syscall_mutex);
-	rc = 0;
-
-out:
-	DPRINTK ("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-
-static ssize_t via_dsp_do_read (struct via_info *card,
-				char __user *userbuf, size_t count,
-				int nonblock)
-{
-        DECLARE_WAITQUEUE(wait, current);
-	const char __user *orig_userbuf = userbuf;
-	struct via_channel *chan = &card->ch_in;
-	size_t size;
-	int n, tmp;
-	ssize_t ret = 0;
-
-	/* if SGD has not yet been started, start it */
-	via_chan_maybe_start (chan);
-
-handle_one_block:
-	/* just to be a nice neighbor */
-	/* Thomas Sailer:
-	 * But also to ourselves, release semaphore if we do so */
-	if (need_resched()) {
-		mutex_unlock(&card->syscall_mutex);
-		schedule ();
-		ret = via_syscall_down (card, nonblock);
-		if (ret)
-			goto out;
-	}
-
-	/* grab current channel software pointer.  In the case of
-	 * recording, this is pointing to the next buffer that
-	 * will receive data from the audio hardware.
-	 */
-	n = chan->sw_ptr;
-
-	/* n_frags represents the number of fragments waiting
-	 * to be copied to userland.  sleep until at least
-	 * one buffer has been read from the audio hardware.
-	 */
-	add_wait_queue(&chan->wait, &wait);
-	for (;;) {
-		__set_current_state(TASK_INTERRUPTIBLE);
-		tmp = atomic_read (&chan->n_frags);
-		assert (tmp >= 0);
-		assert (tmp <= chan->frag_number);
-		if (tmp)
-			break;
-		if (nonblock || !chan->is_active) {
-			ret = -EAGAIN;
-			break;
-		}
-
-		mutex_unlock(&card->syscall_mutex);
-
-		DPRINTK ("Sleeping on block %d\n", n);
-		schedule();
-
-		ret = via_syscall_down (card, nonblock);
-		if (ret)
-			break;
-
-		if (signal_pending (current)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&chan->wait, &wait);
-	if (ret)
-		goto out;
-
-	/* Now that we have a buffer we can read from, send
-	 * as much as sample data possible to userspace.
-	 */
-	while ((count > 0) && (chan->slop_len < chan->frag_size)) {
-		size_t slop_left = chan->frag_size - chan->slop_len;
-		void *base = chan->pgtbl[n / (PAGE_SIZE / chan->frag_size)].cpuaddr;
-		unsigned ofs = (n % (PAGE_SIZE / chan->frag_size)) * chan->frag_size;
-
-		size = (count < slop_left) ? count : slop_left;
-		if (copy_to_user (userbuf,
-				  base + ofs + chan->slop_len,
-				  size)) {
-			ret = -EFAULT;
-			goto out;
-		}
-
-		count -= size;
-		chan->slop_len += size;
-		userbuf += size;
-	}
-
-	/* If we didn't copy the buffer completely to userspace,
-	 * stop now.
-	 */
-	if (chan->slop_len < chan->frag_size)
-		goto out;
-
-	/*
-	 * If we get to this point, we copied one buffer completely
-	 * to userspace, give the buffer back to the hardware.
-	 */
-
-	/* advance channel software pointer to point to
-	 * the next buffer from which we will copy
-	 */
-	if (chan->sw_ptr == (chan->frag_number - 1))
-		chan->sw_ptr = 0;
-	else
-		chan->sw_ptr++;
-
-	/* mark one less buffer waiting to be processed */
-	assert (atomic_read (&chan->n_frags) > 0);
-	atomic_dec (&chan->n_frags);
-
-	/* we are at a block boundary, there is no fragment data */
-	chan->slop_len = 0;
-
-	DPRINTK ("Flushed block %u, sw_ptr now %u, n_frags now %d\n",
-		n, chan->sw_ptr, atomic_read (&chan->n_frags));
-
-	DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n",
-		 inb (card->baseaddr + 0x00),
-		 inb (card->baseaddr + 0x01),
-		 inb (card->baseaddr + 0x02),
-		 inl (card->baseaddr + 0x04),
-		 inl (card->baseaddr + 0x0C),
-		 inl (card->baseaddr + 0x80),
-		 inl (card->baseaddr + 0x84));
-
-	if (count > 0)
-		goto handle_one_block;
-
-out:
-	return (userbuf != orig_userbuf) ? (userbuf - orig_userbuf) : ret;
-}
-
-
-static ssize_t via_dsp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct via_info *card;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-	int rc;
-
-	DPRINTK ("ENTER, file=%p, buffer=%p, count=%u, ppos=%lu\n",
-		 file, buffer, count, ppos ? ((unsigned long)*ppos) : 0);
-
-	assert (file != NULL);
-	card = file->private_data;
-	assert (card != NULL);
-
-	rc = via_syscall_down (card, nonblock);
-	if (rc) goto out;
-
-	if (card->ch_in.is_mapped) {
-		rc = -ENXIO;
-		goto out_up;
-	}
-
-	via_chan_set_buffering(card, &card->ch_in, -1);
-        rc = via_chan_buffer_init (card, &card->ch_in);
-
-	if (rc)
-		goto out_up;
-
-	rc = via_dsp_do_read (card, buffer, count, nonblock);
-
-out_up:
-	mutex_unlock(&card->syscall_mutex);
-out:
-	DPRINTK ("EXIT, returning %ld\n",(long) rc);
-	return rc;
-}
-
-
-static ssize_t via_dsp_do_write (struct via_info *card,
-				 const char __user *userbuf, size_t count,
-				 int nonblock)
-{
-        DECLARE_WAITQUEUE(wait, current);
-	const char __user *orig_userbuf = userbuf;
-	struct via_channel *chan = &card->ch_out;
-	volatile struct via_sgd_table *sgtable = chan->sgtable;
-	size_t size;
-	int n, tmp;
-	ssize_t ret = 0;
-
-handle_one_block:
-	/* just to be a nice neighbor */
-	/* Thomas Sailer:
-	 * But also to ourselves, release semaphore if we do so */
-	if (need_resched()) {
-		mutex_unlock(&card->syscall_mutex);
-		schedule ();
-		ret = via_syscall_down (card, nonblock);
-		if (ret)
-			goto out;
-	}
-
-	/* grab current channel fragment pointer.  In the case of
-	 * playback, this is pointing to the next fragment that
-	 * should receive data from userland.
-	 */
-	n = chan->sw_ptr;
-
-	/* n_frags represents the number of fragments remaining
-	 * to be filled by userspace.  Sleep until
-	 * at least one fragment is available for our use.
-	 */
-	add_wait_queue(&chan->wait, &wait);
-	for (;;) {
-		__set_current_state(TASK_INTERRUPTIBLE);
-		tmp = atomic_read (&chan->n_frags);
-		assert (tmp >= 0);
-		assert (tmp <= chan->frag_number);
-		if (tmp)
-			break;
-		if (nonblock || !chan->is_active) {
-			ret = -EAGAIN;
-			break;
-		}
-
-		mutex_unlock(&card->syscall_mutex);
-
-		DPRINTK ("Sleeping on page %d, tmp==%d, ir==%d\n", n, tmp, chan->is_record);
-		schedule();
-
-		ret = via_syscall_down (card, nonblock);
-		if (ret)
-			break;
-
-		if (signal_pending (current)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&chan->wait, &wait);
-	if (ret)
-		goto out;
-
-	/* Now that we have at least one fragment we can write to, fill the buffer
-	 * as much as possible with data from userspace.
-	 */
-	while ((count > 0) && (chan->slop_len < chan->frag_size)) {
-		size_t slop_left = chan->frag_size - chan->slop_len;
-
-		size = (count < slop_left) ? count : slop_left;
-		if (copy_from_user (chan->pgtbl[n / (PAGE_SIZE / chan->frag_size)].cpuaddr + (n % (PAGE_SIZE / chan->frag_size)) * chan->frag_size + chan->slop_len,
-				    userbuf, size)) {
-			ret = -EFAULT;
-			goto out;
-		}
-
-		count -= size;
-		chan->slop_len += size;
-		userbuf += size;
-	}
-
-	/* If we didn't fill up the buffer with data, stop now.
-         * Put a 'stop' marker in the DMA table too, to tell the
-         * audio hardware to stop if it gets here.
-         */
-	if (chan->slop_len < chan->frag_size) {
-		sgtable[n].count = cpu_to_le32 (chan->slop_len | VIA_EOL | VIA_STOP);
-		goto out;
-	}
-
-	/*
-         * If we get to this point, we have filled a buffer with
-         * audio data, flush the buffer to audio hardware.
-         */
-
-	/* Record the true size for the audio hardware to notice */
-        if (n == (chan->frag_number - 1))
-                sgtable[n].count = cpu_to_le32 (chan->frag_size | VIA_EOL);
-        else
-                sgtable[n].count = cpu_to_le32 (chan->frag_size | VIA_FLAG);
-
-	/* advance channel software pointer to point to
-	 * the next buffer we will fill with data
-	 */
-	if (chan->sw_ptr == (chan->frag_number - 1))
-		chan->sw_ptr = 0;
-	else
-		chan->sw_ptr++;
-
-	/* mark one less buffer as being available for userspace consumption */
-	assert (atomic_read (&chan->n_frags) > 0);
-	atomic_dec (&chan->n_frags);
-
-	/* we are at a block boundary, there is no fragment data */
-	chan->slop_len = 0;
-
-	/* if SGD has not yet been started, start it */
-	via_chan_maybe_start (chan);
-
-	DPRINTK ("Flushed block %u, sw_ptr now %u, n_frags now %d\n",
-		n, chan->sw_ptr, atomic_read (&chan->n_frags));
-
-	DPRINTK ("regs==S=%02X C=%02X TP=%02X BP=%08X RT=%08X SG=%08X CC=%08X SS=%08X\n",
-		 inb (card->baseaddr + 0x00),
-		 inb (card->baseaddr + 0x01),
-		 inb (card->baseaddr + 0x02),
-		 inl (card->baseaddr + 0x04),
-		 inl (card->baseaddr + 0x08),
-		 inl (card->baseaddr + 0x0C),
-		 inl (card->baseaddr + 0x80),
-		 inl (card->baseaddr + 0x84));
-
-	if (count > 0)
-		goto handle_one_block;
-
-out:
-	if (userbuf - orig_userbuf)
-		return userbuf - orig_userbuf;
-	else
-		return ret;
-}
-
-
-static ssize_t via_dsp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
-{
-	struct via_info *card;
-	ssize_t rc;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-
-	DPRINTK ("ENTER, file=%p, buffer=%p, count=%u, ppos=%lu\n",
-		 file, buffer, count, ppos ? ((unsigned long)*ppos) : 0);
-
-	assert (file != NULL);
-	card = file->private_data;
-	assert (card != NULL);
-
-	rc = via_syscall_down (card, nonblock);
-	if (rc) goto out;
-
-	if (card->ch_out.is_mapped) {
-		rc = -ENXIO;
-		goto out_up;
-	}
-
-	via_chan_set_buffering(card, &card->ch_out, -1);
-	rc = via_chan_buffer_init (card, &card->ch_out);
-
-	if (rc)
-		goto out_up;
-
-	rc = via_dsp_do_write (card, buffer, count, nonblock);
-
-out_up:
-	mutex_unlock(&card->syscall_mutex);
-out:
-	DPRINTK ("EXIT, returning %ld\n",(long) rc);
-	return rc;
-}
-
-
-static unsigned int via_dsp_poll(struct file *file, struct poll_table_struct *wait)
-{
-	struct via_info *card;
-	struct via_channel *chan;
-	unsigned int mask = 0;
-
-	DPRINTK ("ENTER\n");
-
-	assert (file != NULL);
-	card = file->private_data;
-	assert (card != NULL);
-
-	if (file->f_mode & FMODE_READ) {
-		chan = &card->ch_in;
-		if (sg_active (chan->iobase))
-	                poll_wait(file, &chan->wait, wait);
-		if (atomic_read (&chan->n_frags) > 0)
-			mask |= POLLIN | POLLRDNORM;
-	}
-
-	if (file->f_mode & FMODE_WRITE) {
-		chan = &card->ch_out;
-		if (sg_active (chan->iobase))
-	                poll_wait(file, &chan->wait, wait);
-		if (atomic_read (&chan->n_frags) > 0)
-			mask |= POLLOUT | POLLWRNORM;
-	}
-
-	DPRINTK ("EXIT, returning %u\n", mask);
-	return mask;
-}
-
-
-/**
- *	via_dsp_drain_playback - sleep until all playback samples are flushed
- *	@card: Private info for specified board
- *	@chan: Channel to drain
- *	@nonblock: boolean, non-zero if O_NONBLOCK is set
- *
- *	Sleeps until all playback has been flushed to the audio
- *	hardware.
- *
- *	Locking: inside card->syscall_mutex
- */
-
-static int via_dsp_drain_playback (struct via_info *card,
-				   struct via_channel *chan, int nonblock)
-{
-        DECLARE_WAITQUEUE(wait, current);
-	int ret = 0;
-
-	DPRINTK ("ENTER, nonblock = %d\n", nonblock);
-
-	if (chan->slop_len > 0)
-		via_chan_flush_frag (chan);
-
-	if (atomic_read (&chan->n_frags) == chan->frag_number)
-		goto out;
-
-	via_chan_maybe_start (chan);
-
-	add_wait_queue(&chan->wait, &wait);
-	for (;;) {
-		DPRINTK ("FRAGS %d FRAGNUM %d\n", atomic_read(&chan->n_frags), chan->frag_number);
-		__set_current_state(TASK_INTERRUPTIBLE);
-		if (atomic_read (&chan->n_frags) >= chan->frag_number)
-			break;
-
-		if (nonblock) {
-			DPRINTK ("EXIT, returning -EAGAIN\n");
-			ret = -EAGAIN;
-			break;
-		}
-
-#ifdef VIA_DEBUG
-		{
-		u8 r40,r41,r42,r43,r44,r48;
-		pci_read_config_byte (card->pdev, 0x40, &r40);
-		pci_read_config_byte (card->pdev, 0x41, &r41);
-		pci_read_config_byte (card->pdev, 0x42, &r42);
-		pci_read_config_byte (card->pdev, 0x43, &r43);
-		pci_read_config_byte (card->pdev, 0x44, &r44);
-		pci_read_config_byte (card->pdev, 0x48, &r48);
-		DPRINTK ("PCI config: %02X %02X %02X %02X %02X %02X\n",
-			r40,r41,r42,r43,r44,r48);
-
-		DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n",
-			 inb (card->baseaddr + 0x00),
-			 inb (card->baseaddr + 0x01),
-			 inb (card->baseaddr + 0x02),
-			 inl (card->baseaddr + 0x04),
-			 inl (card->baseaddr + 0x0C),
-			 inl (card->baseaddr + 0x80),
-			 inl (card->baseaddr + 0x84));
-		}
-
-		if (!chan->is_active)
-			printk (KERN_ERR "sleeping but not active\n");
-#endif
-
-		mutex_unlock(&card->syscall_mutex);
-
-		DPRINTK ("sleeping, nbufs=%d\n", atomic_read (&chan->n_frags));
-		schedule();
-
-		if ((ret = via_syscall_down (card, nonblock)))
-			break;
-
-		if (signal_pending (current)) {
-			DPRINTK ("EXIT, returning -ERESTARTSYS\n");
-			ret = -ERESTARTSYS;
-			break;
-		}
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&chan->wait, &wait);
-
-#ifdef VIA_DEBUG
-	{
-		u8 r40,r41,r42,r43,r44,r48;
-		pci_read_config_byte (card->pdev, 0x40, &r40);
-		pci_read_config_byte (card->pdev, 0x41, &r41);
-		pci_read_config_byte (card->pdev, 0x42, &r42);
-		pci_read_config_byte (card->pdev, 0x43, &r43);
-		pci_read_config_byte (card->pdev, 0x44, &r44);
-		pci_read_config_byte (card->pdev, 0x48, &r48);
-		DPRINTK ("PCI config: %02X %02X %02X %02X %02X %02X\n",
-			r40,r41,r42,r43,r44,r48);
-
-		DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n",
-			 inb (card->baseaddr + 0x00),
-			 inb (card->baseaddr + 0x01),
-			 inb (card->baseaddr + 0x02),
-			 inl (card->baseaddr + 0x04),
-			 inl (card->baseaddr + 0x0C),
-			 inl (card->baseaddr + 0x80),
-			 inl (card->baseaddr + 0x84));
-
-		DPRINTK ("final nbufs=%d\n", atomic_read (&chan->n_frags));
-	}
-#endif
-
-out:
-	DPRINTK ("EXIT, returning %d\n", ret);
-	return ret;
-}
-
-
-/**
- *	via_dsp_ioctl_space - get information about channel buffering
- *	@card: Private info for specified board
- *	@chan: pointer to channel-specific info
- *	@arg: user buffer for returned information
- *
- *	Handles SNDCTL_DSP_GETISPACE and SNDCTL_DSP_GETOSPACE.
- *
- *	Locking: inside card->syscall_mutex
- */
-
-static int via_dsp_ioctl_space (struct via_info *card,
-				struct via_channel *chan,
-				void __user *arg)
-{
-	audio_buf_info info;
-
-	via_chan_set_buffering(card, chan, -1);
-
-	info.fragstotal = chan->frag_number;
-	info.fragsize = chan->frag_size;
-
-	/* number of full fragments we can read/write without blocking */
-	info.fragments = atomic_read (&chan->n_frags);
-
-	if ((chan->slop_len % chan->frag_size > 0) && (info.fragments > 0))
-		info.fragments--;
-
-	/* number of bytes that can be read or written immediately
-	 * without blocking.
-	 */
-	info.bytes = (info.fragments * chan->frag_size);
-	if (chan->slop_len % chan->frag_size > 0)
-		info.bytes += chan->frag_size - (chan->slop_len % chan->frag_size);
-
-	DPRINTK ("EXIT, returning fragstotal=%d, fragsize=%d, fragments=%d, bytes=%d\n",
-		info.fragstotal,
-		info.fragsize,
-		info.fragments,
-		info.bytes);
-
-	return copy_to_user (arg, &info, sizeof (info))?-EFAULT:0;
-}
-
-
-/**
- *	via_dsp_ioctl_ptr - get information about hardware buffer ptr
- *	@card: Private info for specified board
- *	@chan: pointer to channel-specific info
- *	@arg: user buffer for returned information
- *
- *	Handles SNDCTL_DSP_GETIPTR and SNDCTL_DSP_GETOPTR.
- *
- *	Locking: inside card->syscall_mutex
- */
-
-static int via_dsp_ioctl_ptr (struct via_info *card,
-				struct via_channel *chan,
-				void __user *arg)
-{
-	count_info info;
-
-	spin_lock_irq (&card->lock);
-
-	info.bytes = chan->bytes;
-	info.blocks = chan->n_irqs;
-	chan->n_irqs = 0;
-
-	spin_unlock_irq (&card->lock);
-
-	if (chan->is_active) {
-		unsigned long extra;
-		info.ptr = atomic_read (&chan->hw_ptr) * chan->frag_size;
-		extra = chan->frag_size - via_sg_offset(chan);
-		info.ptr += extra;
-		info.bytes += extra;
-	} else {
-		info.ptr = 0;
-	}
-
-	DPRINTK ("EXIT, returning bytes=%d, blocks=%d, ptr=%d\n",
-		info.bytes,
-		info.blocks,
-		info.ptr);
-
-	return copy_to_user (arg, &info, sizeof (info))?-EFAULT:0;
-}
-
-
-static int via_dsp_ioctl_trigger (struct via_channel *chan, int val)
-{
-	int enable, do_something;
-
-	if (chan->is_record)
-		enable = (val & PCM_ENABLE_INPUT);
-	else
-		enable = (val & PCM_ENABLE_OUTPUT);
-
-	if (!chan->is_enabled && enable) {
-		do_something = 1;
-	} else if (chan->is_enabled && !enable) {
-		do_something = -1;
-	} else {
-		do_something = 0;
-	}
-
-	DPRINTK ("enable=%d, do_something=%d\n",
-		 enable, do_something);
-
-	if (chan->is_active && do_something)
-		return -EINVAL;
-
-	if (do_something == 1) {
-		chan->is_enabled = 1;
-		via_chan_maybe_start (chan);
-		DPRINTK ("Triggering input\n");
-	}
-
-	else if (do_something == -1) {
-		chan->is_enabled = 0;
-		DPRINTK ("Setup input trigger\n");
-	}
-
-	return 0;
-}
-
-
-static int via_dsp_ioctl (struct inode *inode, struct file *file,
-			  unsigned int cmd, unsigned long arg)
-{
-	int rc, rd=0, wr=0, val=0;
-	struct via_info *card;
-	struct via_channel *chan;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-	int __user *ip = (int __user *)arg;
-	void __user *p = (void __user *)arg;
-
-	assert (file != NULL);
-	card = file->private_data;
-	assert (card != NULL);
-
-	if (file->f_mode & FMODE_WRITE)
-		wr = 1;
-	if (file->f_mode & FMODE_READ)
-		rd = 1;
-
-	rc = via_syscall_down (card, nonblock);
-	if (rc)
-		return rc;
-	rc = -EINVAL;
-
-	switch (cmd) {
-
-	/* OSS API version.  XXX unverified */
-	case OSS_GETVERSION:
-		DPRINTK ("ioctl OSS_GETVERSION, EXIT, returning SOUND_VERSION\n");
-		rc = put_user (SOUND_VERSION, ip);
-		break;
-
-	/* list of supported PCM data formats */
-	case SNDCTL_DSP_GETFMTS:
-		DPRINTK ("DSP_GETFMTS, EXIT, returning AFMT U8|S16_LE\n");
-                rc = put_user (AFMT_U8 | AFMT_S16_LE, ip);
-		break;
-
-	/* query or set current channel's PCM data format */
-	case SNDCTL_DSP_SETFMT:
-		if (get_user(val, ip)) {
-			rc = -EFAULT;
-			break;
-		}
-		DPRINTK ("DSP_SETFMT, val==%d\n", val);
-		if (val != AFMT_QUERY) {
-			rc = 0;
-
-			if (rd)
-				rc = via_chan_set_fmt (card, &card->ch_in, val);
-
-			if (rc >= 0 && wr)
-				rc = via_chan_set_fmt (card, &card->ch_out, val);
-
-			if (rc < 0)
-				break;
-
-			val = rc;
-		} else {
-			if ((rd && (card->ch_in.pcm_fmt & VIA_PCM_FMT_16BIT)) ||
-			    (wr && (card->ch_out.pcm_fmt & VIA_PCM_FMT_16BIT)))
-				val = AFMT_S16_LE;
-			else
-				val = AFMT_U8;
-		}
-		DPRINTK ("SETFMT EXIT, returning %d\n", val);
-                rc = put_user (val, ip);
-		break;
-
-	/* query or set number of channels (1=mono, 2=stereo, 4/6 for multichannel) */
-        case SNDCTL_DSP_CHANNELS:
-		if (get_user(val, ip)) {
-			rc = -EFAULT;
-			break;
-		}
-		DPRINTK ("DSP_CHANNELS, val==%d\n", val);
-		if (val != 0) {
-			rc = 0;
-
-			if (rd)
-				rc = via_chan_set_stereo (card, &card->ch_in, val);
-
-			if (rc >= 0 && wr)
-				rc = via_chan_set_stereo (card, &card->ch_out, val);
-
-			if (rc < 0)
-				break;
-
-			val = rc;
-		} else {
-			if (rd)
-				val = card->ch_in.channels;
-			else
-				val = card->ch_out.channels;
-		}
-		DPRINTK ("CHANNELS EXIT, returning %d\n", val);
-                rc = put_user (val, ip);
-		break;
-
-	/* enable (val is not zero) or disable (val == 0) stereo */
-        case SNDCTL_DSP_STEREO:
-		if (get_user(val, ip)) {
-			rc = -EFAULT;
-			break;
-		}
-		DPRINTK ("DSP_STEREO, val==%d\n", val);
-		rc = 0;
-
-		if (rd)
-			rc = via_chan_set_stereo (card, &card->ch_in, val ? 2 : 1);
-		if (rc >= 0 && wr)
-			rc = via_chan_set_stereo (card, &card->ch_out, val ? 2 : 1);
-
-		if (rc < 0)
-			break;
-
-		val = rc - 1;
-
-		DPRINTK ("STEREO EXIT, returning %d\n", val);
-		rc = put_user(val, ip);
-		break;
-
-	/* query or set sampling rate */
-        case SNDCTL_DSP_SPEED:
-		if (get_user(val, ip)) {
-			rc = -EFAULT;
-			break;
-		}
-		DPRINTK ("DSP_SPEED, val==%d\n", val);
-		if (val < 0) {
-			rc = -EINVAL;
-			break;
-		}
-		if (val > 0) {
-			rc = 0;
-
-			if (rd)
-				rc = via_chan_set_speed (card, &card->ch_in, val);
-			if (rc >= 0 && wr)
-				rc = via_chan_set_speed (card, &card->ch_out, val);
-
-			if (rc < 0)
-				break;
-
-			val = rc;
-		} else {
-			if (rd)
-				val = card->ch_in.rate;
-			else if (wr)
-				val = card->ch_out.rate;
-			else
-				val = 0;
-		}
-		DPRINTK ("SPEED EXIT, returning %d\n", val);
-                rc = put_user (val, ip);
-		break;
-
-	/* wait until all buffers have been played, and then stop device */
-	case SNDCTL_DSP_SYNC:
-		DPRINTK ("DSP_SYNC\n");
-		rc = 0;
-		if (wr) {
-			DPRINTK ("SYNC EXIT (after calling via_dsp_drain_playback)\n");
-			rc = via_dsp_drain_playback (card, &card->ch_out, nonblock);
-		}
-		break;
-
-	/* stop recording/playback immediately */
-        case SNDCTL_DSP_RESET:
-		DPRINTK ("DSP_RESET\n");
-		if (rd) {
-			via_chan_clear (card, &card->ch_in);
-			card->ch_in.frag_number = 0;
-			card->ch_in.frag_size = 0;
-			atomic_set(&card->ch_in.n_frags, 0);
-		}
-
-		if (wr) {
-			via_chan_clear (card, &card->ch_out);
-			card->ch_out.frag_number = 0;
-			card->ch_out.frag_size = 0;
-			atomic_set(&card->ch_out.n_frags, 0);
-		}
-
-		rc = 0;
-		break;
-
-	case SNDCTL_DSP_NONBLOCK:
-		file->f_flags |= O_NONBLOCK;
-		rc = 0;
-		break;
-
-	/* obtain bitmask of device capabilities, such as mmap, full duplex, etc. */
-	case SNDCTL_DSP_GETCAPS:
-		DPRINTK ("DSP_GETCAPS\n");
-		rc = put_user(VIA_DSP_CAP, ip);
-		break;
-
-	/* obtain buffer fragment size */
-	case SNDCTL_DSP_GETBLKSIZE:
-		DPRINTK ("DSP_GETBLKSIZE\n");
-
-		if (rd) {
-			via_chan_set_buffering(card, &card->ch_in, -1);
-			rc = put_user(card->ch_in.frag_size, ip);
-		} else if (wr) {
-			via_chan_set_buffering(card, &card->ch_out, -1);
-			rc = put_user(card->ch_out.frag_size, ip);
-		}
-		break;
-
-	/* obtain information about input buffering */
-	case SNDCTL_DSP_GETISPACE:
-		DPRINTK ("DSP_GETISPACE\n");
-		if (rd)
-			rc = via_dsp_ioctl_space (card, &card->ch_in, p);
-		break;
-
-	/* obtain information about output buffering */
-	case SNDCTL_DSP_GETOSPACE:
-		DPRINTK ("DSP_GETOSPACE\n");
-		if (wr)
-			rc = via_dsp_ioctl_space (card, &card->ch_out, p);
-		break;
-
-	/* obtain information about input hardware pointer */
-	case SNDCTL_DSP_GETIPTR:
-		DPRINTK ("DSP_GETIPTR\n");
-		if (rd)
-			rc = via_dsp_ioctl_ptr (card, &card->ch_in, p);
-		break;
-
-	/* obtain information about output hardware pointer */
-	case SNDCTL_DSP_GETOPTR:
-		DPRINTK ("DSP_GETOPTR\n");
-		if (wr)
-			rc = via_dsp_ioctl_ptr (card, &card->ch_out, p);
-		break;
-
-	/* return number of bytes remaining to be played by DMA engine */
-	case SNDCTL_DSP_GETODELAY:
-		{
-		DPRINTK ("DSP_GETODELAY\n");
-
-		chan = &card->ch_out;
-
-		if (!wr)
-			break;
-
-		if (chan->is_active) {
-
-			val = chan->frag_number - atomic_read (&chan->n_frags);
-
-			assert(val >= 0);
-				
-			if (val > 0) {
-				val *= chan->frag_size;
-				val -= chan->frag_size - via_sg_offset(chan);
-			}
-			val += chan->slop_len % chan->frag_size;
-		} else
-			val = 0;
-
-		assert (val <= (chan->frag_size * chan->frag_number));
-
-		DPRINTK ("GETODELAY EXIT, val = %d bytes\n", val);
-                rc = put_user (val, ip);
-		break;
-		}
-
-	/* handle the quick-start of a channel,
-	 * or the notification that a quick-start will
-	 * occur in the future
-	 */
-	case SNDCTL_DSP_SETTRIGGER:
-		if (get_user(val, ip)) {
-			rc = -EFAULT;
-			break;
-		}
-		DPRINTK ("DSP_SETTRIGGER, rd=%d, wr=%d, act=%d/%d, en=%d/%d\n",
-			rd, wr, card->ch_in.is_active, card->ch_out.is_active,
-			card->ch_in.is_enabled, card->ch_out.is_enabled);
-
-		rc = 0;
-
-		if (rd)
-			rc = via_dsp_ioctl_trigger (&card->ch_in, val);
-
-		if (!rc && wr)
-			rc = via_dsp_ioctl_trigger (&card->ch_out, val);
-
-		break;
-
-	case SNDCTL_DSP_GETTRIGGER:
-		val = 0;
-		if ((file->f_mode & FMODE_READ) && card->ch_in.is_enabled)
-			val |= PCM_ENABLE_INPUT;
-		if ((file->f_mode & FMODE_WRITE) && card->ch_out.is_enabled)
-			val |= PCM_ENABLE_OUTPUT;
-		rc = put_user(val, ip);
-		break;
-
-	/* Enable full duplex.  Since we do this as soon as we are opened
-	 * with O_RDWR, this is mainly a no-op that always returns success.
-	 */
-	case SNDCTL_DSP_SETDUPLEX:
-		DPRINTK ("DSP_SETDUPLEX\n");
-		if (!rd || !wr)
-			break;
-		rc = 0;
-		break;
-
-	/* set fragment size.  implemented as a successful no-op for now */
-	case SNDCTL_DSP_SETFRAGMENT:
-		if (get_user(val, ip)) {
-			rc = -EFAULT;
-			break;
-		}
-		DPRINTK ("DSP_SETFRAGMENT, val==%d\n", val);
-
-		if (rd)
-			rc = via_chan_set_buffering(card, &card->ch_in, val);
-
-		if (wr)
-			rc = via_chan_set_buffering(card, &card->ch_out, val);
-
-		DPRINTK ("SNDCTL_DSP_SETFRAGMENT (fragshift==0x%04X (%d), maxfrags==0x%04X (%d))\n",
-			 val & 0xFFFF,
-			 val & 0xFFFF,
-			 (val >> 16) & 0xFFFF,
-			 (val >> 16) & 0xFFFF);
-
-		rc = 0;
-		break;
-
-	/* inform device of an upcoming pause in input (or output). */
-	case SNDCTL_DSP_POST:
-		DPRINTK ("DSP_POST\n");
-		if (wr) {
-			if (card->ch_out.slop_len > 0)
-				via_chan_flush_frag (&card->ch_out);
-			via_chan_maybe_start (&card->ch_out);
-		}
-
-		rc = 0;
-		break;
-
-	/* not implemented */
-	default:
-		DPRINTK ("unhandled ioctl, cmd==%u, arg==%p\n",
-			 cmd, p);
-		break;
-	}
-
-	mutex_unlock(&card->syscall_mutex);
-	DPRINTK ("EXIT, returning %d\n", rc);
-	return rc;
-}
-
-
-static int via_dsp_open (struct inode *inode, struct file *file)
-{
-	int minor = iminor(inode);
-	struct via_info *card;
-	struct pci_dev *pdev = NULL;
-	struct via_channel *chan;
-	struct pci_driver *drvr;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-
-	DPRINTK ("ENTER, minor=%d, file->f_mode=0x%x\n", minor, file->f_mode);
-
-	if (!(file->f_mode & (FMODE_READ | FMODE_WRITE))) {
-		DPRINTK ("EXIT, returning -EINVAL\n");
-		return -EINVAL;
-	}
-
-	card = NULL;
-	while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
-		drvr = pci_dev_driver (pdev);
-		if (drvr == &via_driver) {
-			assert (pci_get_drvdata (pdev) != NULL);
-
-			card = pci_get_drvdata (pdev);
-			DPRINTK ("dev_dsp = %d, minor = %d, assn = %d\n",
-				 card->dev_dsp, minor,
-				 (card->dev_dsp ^ minor) & ~0xf);
-
-			if (((card->dev_dsp ^ minor) & ~0xf) == 0)
-				goto match;
-		}
-	}
-
-	DPRINTK ("no matching %s found\n", card ? "minor" : "driver");
-	return -ENODEV;
-
-match:
-	pci_dev_put(pdev);
-	if (nonblock) {
-		if (!mutex_trylock(&card->open_mutex)) {
-			DPRINTK ("EXIT, returning -EAGAIN\n");
-			return -EAGAIN;
-		}
-	} else {
-		if (mutex_lock_interruptible(&card->open_mutex)) {
-			DPRINTK ("EXIT, returning -ERESTARTSYS\n");
-			return -ERESTARTSYS;
-		}
-	}
-
-	file->private_data = card;
-	DPRINTK ("file->f_mode == 0x%x\n", file->f_mode);
-
-	/* handle input from analog source */
-	if (file->f_mode & FMODE_READ) {
-		chan = &card->ch_in;
-
-		via_chan_init (card, chan);
-
-		/* why is this forced to 16-bit stereo in all drivers? */
-		chan->pcm_fmt = VIA_PCM_FMT_16BIT | VIA_PCM_FMT_STEREO;
-		chan->channels = 2;
-
-		// TO DO - use FIFO: via_capture_fifo(card, 1);
-		via_chan_pcm_fmt (chan, 0);
-		via_set_rate (card->ac97, chan, 44100);
-	}
-
-	/* handle output to analog source */
-	if (file->f_mode & FMODE_WRITE) {
-		chan = &card->ch_out;
-
-		via_chan_init (card, chan);
-
-		if (file->f_mode & FMODE_READ) {
-			/* if in duplex mode make the recording and playback channels
-			   have the same settings */
-			chan->pcm_fmt = VIA_PCM_FMT_16BIT | VIA_PCM_FMT_STEREO;
-			chan->channels = 2;
-			via_chan_pcm_fmt (chan, 0);
-                        via_set_rate (card->ac97, chan, 44100);
-		} else {
-			 if ((minor & 0xf) == SND_DEV_DSP16) {
-				chan->pcm_fmt = VIA_PCM_FMT_16BIT;
-				via_chan_pcm_fmt (chan, 0);
-				via_set_rate (card->ac97, chan, 44100);
-			} else {
-				via_chan_pcm_fmt (chan, 1);
-				via_set_rate (card->ac97, chan, 8000);
-			}
-		}
-	}
-
-	DPRINTK ("EXIT, returning 0\n");
-	return nonseekable_open(inode, file);
-}
-
-
-static int via_dsp_release(struct inode *inode, struct file *file)
-{
-	struct via_info *card;
-	int nonblock = (file->f_flags & O_NONBLOCK);
-	int rc;
-
-	DPRINTK ("ENTER\n");
-
-	assert (file != NULL);
-	card = file->private_data;
-	assert (card != NULL);
-
-	rc = via_syscall_down (card, nonblock);
-	if (rc) {
-		DPRINTK ("EXIT (syscall_down error), rc=%d\n", rc);
-		return rc;
-	}
-
-	if (file->f_mode & FMODE_WRITE) {
-		rc = via_dsp_drain_playback (card, &card->ch_out, nonblock);
-		if (rc && rc != -ERESTARTSYS)	/* Nobody needs to know about ^C */
-			printk (KERN_DEBUG "via_audio: ignoring drain playback error %d\n", rc);
-
-		via_chan_free (card, &card->ch_out);
-		via_chan_buffer_free(card, &card->ch_out);
-	}
-
-	if (file->f_mode & FMODE_READ) {
-		via_chan_free (card, &card->ch_in);
-		via_chan_buffer_free (card, &card->ch_in);
-	}
-
-	mutex_unlock(&card->syscall_mutex);
-	mutex_unlock(&card->open_mutex);
-
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-}
-
-
-/****************************************************************
- *
- * Chip setup and kernel registration
- *
- *
- */
-
-static int __devinit via_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
-{
-#ifdef CONFIG_MIDI_VIA82CXXX
-	u8 r42;
-#endif
-	int rc;
-	struct via_info *card;
-	static int printed_version;
-
-	DPRINTK ("ENTER\n");
-
-	if (printed_version++ == 0)
-		printk (KERN_INFO "Via 686a/8233/8235 audio driver " VIA_VERSION "\n");
-
-	rc = pci_enable_device (pdev);
-	if (rc)
-		goto err_out;
-
-	rc = pci_request_regions (pdev, "via82cxxx_audio");
-	if (rc)
-		goto err_out_disable;
-
-	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-	if (rc)
-		goto err_out_res;
-	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-	if (rc)
-		goto err_out_res;
-
-	card = kmalloc (sizeof (*card), GFP_KERNEL);
-	if (!card) {
-		printk (KERN_ERR PFX "out of memory, aborting\n");
-		rc = -ENOMEM;
-		goto err_out_res;
-	}
-
-	pci_set_drvdata (pdev, card);
-
-	memset (card, 0, sizeof (*card));
-	card->pdev = pdev;
-	card->baseaddr = pci_resource_start (pdev, 0);
-	card->card_num = via_num_cards++;
-	spin_lock_init (&card->lock);
-	spin_lock_init (&card->ac97_lock);
-	mutex_init(&card->syscall_mutex);
-	mutex_init(&card->open_mutex);
-
-	/* we must init these now, in case the intr handler needs them */
-	via_chan_init_defaults (card, &card->ch_out);
-	via_chan_init_defaults (card, &card->ch_in);
-	via_chan_init_defaults (card, &card->ch_fm);
-
-	/* if BAR 2 is present, chip is Rev H or later,
-	 * which means it has a few extra features */
-	if (pci_resource_start (pdev, 2) > 0)
-		card->rev_h = 1;
-		
-	/* Overkill for now, but more flexible done right */
-	
-	card->intmask = id->driver_data;
-	card->legacy = !card->intmask;
-	card->sixchannel = id->driver_data;
-	
-	if(card->sixchannel)
-		printk(KERN_INFO PFX "Six channel audio available\n");
-	if (pdev->irq < 1) {
-		printk (KERN_ERR PFX "invalid PCI IRQ %d, aborting\n", pdev->irq);
-		rc = -ENODEV;
-		goto err_out_kfree;
-	}
-
-	if (!(pci_resource_flags (pdev, 0) & IORESOURCE_IO)) {
-		printk (KERN_ERR PFX "unable to locate I/O resources, aborting\n");
-		rc = -ENODEV;
-		goto err_out_kfree;
-	}
-
-	pci_set_master(pdev);
-	
-	/*
-	 * init AC97 mixer and codec
-	 */
-	rc = via_ac97_init (card);
-	if (rc) {
-		printk (KERN_ERR PFX "AC97 init failed, aborting\n");
-		goto err_out_kfree;
-	}
-
-	/*
-	 * init DSP device
-	 */
-	rc = via_dsp_init (card);
-	if (rc) {
-		printk (KERN_ERR PFX "DSP device init failed, aborting\n");
-		goto err_out_have_mixer;
-	}
-
-	/*
-	 * init and turn on interrupts, as the last thing we do
-	 */
-	rc = via_interrupt_init (card);
-	if (rc) {
-		printk (KERN_ERR PFX "interrupt init failed, aborting\n");
-		goto err_out_have_dsp;
-	}
-
-	printk (KERN_INFO PFX "board #%d at 0x%04lX, IRQ %d\n",
-		card->card_num + 1, card->baseaddr, pdev->irq);
-
-#ifdef CONFIG_MIDI_VIA82CXXX
-	/* Disable by default */
-	card->midi_info.io_base = 0;
-
-	if(card->legacy)
-	{
-		pci_read_config_byte (pdev, 0x42, &r42);
-		/* Disable MIDI interrupt */
-		pci_write_config_byte (pdev, 0x42, r42 | VIA_CR42_MIDI_IRQMASK);
-		if (r42 & VIA_CR42_MIDI_ENABLE)
-		{
-			if (r42 & VIA_CR42_MIDI_PNP) /* Address selected by iobase 2 - not tested */
-				card->midi_info.io_base = pci_resource_start (pdev, 2);
-			else /* Address selected by byte 0x43 */
-			{
-				u8 r43;
-				pci_read_config_byte (pdev, 0x43, &r43);
-				card->midi_info.io_base = 0x300 + ((r43 & 0x0c) << 2);
-			}
-
-			card->midi_info.irq = -pdev->irq;
-			if (probe_uart401(& card->midi_info, THIS_MODULE))
-			{
-				card->midi_devc=midi_devs[card->midi_info.slots[4]]->devc;
-				pci_write_config_byte(pdev, 0x42, r42 & ~VIA_CR42_MIDI_IRQMASK);
-				printk("Enabled Via MIDI\n");
-			}
-		}
-	}
-#endif
-
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-
-err_out_have_dsp:
-	via_dsp_cleanup (card);
-
-err_out_have_mixer:
-	via_ac97_cleanup (card);
-
-err_out_kfree:
-#ifndef VIA_NDEBUG
-	memset (card, OSS_POISON_FREE, sizeof (*card)); /* poison memory */
-#endif
-	kfree (card);
-
-err_out_res:
-	pci_release_regions (pdev);
-
-err_out_disable:
-	pci_disable_device (pdev);
-
-err_out:
-	pci_set_drvdata (pdev, NULL);
-	DPRINTK ("EXIT - returning %d\n", rc);
-	return rc;
-}
-
-
-static void __devexit via_remove_one (struct pci_dev *pdev)
-{
-	struct via_info *card;
-
-	DPRINTK ("ENTER\n");
-
-	assert (pdev != NULL);
-	card = pci_get_drvdata (pdev);
-	assert (card != NULL);
-
-#ifdef CONFIG_MIDI_VIA82CXXX
-	if (card->midi_info.io_base)
-		unload_uart401(&card->midi_info);
-#endif
-
-	free_irq (card->pdev->irq, card);
-	via_dsp_cleanup (card);
-	via_ac97_cleanup (card);
-
-#ifndef VIA_NDEBUG
-	memset (card, OSS_POISON_FREE, sizeof (*card)); /* poison memory */
-#endif
-	kfree (card);
-
-	pci_set_drvdata (pdev, NULL);
-
-	pci_release_regions (pdev);
-	pci_disable_device (pdev);
-	pci_set_power_state (pdev, 3); /* ...zzzzzz */
-
-	DPRINTK ("EXIT\n");
-	return;
-}
-
-
-/****************************************************************
- *
- * Driver initialization and cleanup
- *
- *
- */
-
-static int __init init_via82cxxx_audio(void)
-{
-	int rc;
-
-	DPRINTK ("ENTER\n");
-
-	rc = pci_register_driver (&via_driver);
-	if (rc) {
-		DPRINTK ("EXIT, returning %d\n", rc);
-		return rc;
-	}
-
-	DPRINTK ("EXIT, returning 0\n");
-	return 0;
-}
-
-
-static void __exit cleanup_via82cxxx_audio(void)
-{
-	DPRINTK ("ENTER\n");
-
-	pci_unregister_driver (&via_driver);
-
-	DPRINTK ("EXIT\n");
-}
-
-
-module_init(init_via82cxxx_audio);
-module_exit(cleanup_via82cxxx_audio);
-
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_DESCRIPTION("DSP audio and mixer driver for Via 82Cxxx audio devices");
-MODULE_LICENSE("GPL");
-