summaryrefslogtreecommitdiffstats
path: root/sound/pci/ca0106/ca0106.h
diff options
context:
space:
mode:
authorJames Courtier-Dutton <James@superbug.co.uk>2005-05-27 22:07:23 +0200
committerJaroslav Kysela <perex@suse.cz>2005-06-22 12:27:06 +0200
commit7199acdc74dc16d2e75f83b8c65301ad19c40ef3 (patch)
tree923cbbe39b3e82e3f24ffcc04dce864995d6a199 /sound/pci/ca0106/ca0106.h
parentda04b128cf0d74dd4cab270c53d9264e70f9203e (diff)
[ALSA] Implement support for Line-in capture on SB Live 24bit.
CA0106 driver Notes: MIC capture not tested yet. Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Diffstat (limited to 'sound/pci/ca0106/ca0106.h')
-rw-r--r--sound/pci/ca0106/ca0106.h61
1 files changed, 57 insertions, 4 deletions
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index c623858428c..67e56a530b2 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -1,7 +1,7 @@
/*
* Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
* Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
- * Version: 0.0.20
+ * Version: 0.0.21
*
* FEATURES currently supported:
* See ca0106_main.c for features.
@@ -45,6 +45,8 @@
* Added I2C and SPI registers. Filled in interrupt enable.
* 0.0.20
* Added GPIO info for SB Live 24bit.
+ * 0.0.21
+ * Implement support for Line-in capture on SB Live 24bit.
*
*
* This code was initally based on code from ALSA's emu10k1x.c which is:
@@ -475,9 +477,56 @@
/* Causes interrupts based on timer intervals. */
#define SPI 0x7a /* SPI: Serial Interface Register */
#define I2C_A 0x7b /* I2C Address. 32 bit */
-#define I2C_0 0x7c /* I2C Data Port 0. 32 bit */
-#define I2C_1 0x7d /* I2C Data Port 1. 32 bit */
-
+#define I2C_D0 0x7c /* I2C Data Port 0. 32 bit */
+#define I2C_D1 0x7d /* I2C Data Port 1. 32 bit */
+//I2C values
+#define I2C_A_ADC_ADD_MASK 0x000000fe //The address is a 7 bit address
+#define I2C_A_ADC_RW_MASK 0x00000001 //bit mask for R/W
+#define I2C_A_ADC_TRANS_MASK 0x00000010 //Bit mask for I2c address DAC value
+#define I2C_A_ADC_ABORT_MASK 0x00000020 //Bit mask for I2C transaction abort flag
+#define I2C_A_ADC_LAST_MASK 0x00000040 //Bit mask for Last word transaction
+#define I2C_A_ADC_BYTE_MASK 0x00000080 //Bit mask for Byte Mode
+
+#define I2C_A_ADC_ADD 0x00000034 //This is the Device address for ADC
+#define I2C_A_ADC_READ 0x00000001 //To perform a read operation
+#define I2C_A_ADC_START 0x00000100 //Start I2C transaction
+#define I2C_A_ADC_ABORT 0x00000200 //I2C transaction abort
+#define I2C_A_ADC_LAST 0x00000400 //I2C last transaction
+#define I2C_A_ADC_BYTE 0x00000800 //I2C one byte mode
+
+#define I2C_D_ADC_REG_MASK 0xfe000000 //ADC address register
+#define I2C_D_ADC_DAT_MASK 0x01ff0000 //ADC data register
+
+#define ADC_TIMEOUT 0x00000007 //ADC Timeout Clock Disable
+#define ADC_IFC_CTRL 0x0000000b //ADC Interface Control
+#define ADC_MASTER 0x0000000c //ADC Master Mode Control
+#define ADC_POWER 0x0000000d //ADC PowerDown Control
+#define ADC_ATTEN_ADCL 0x0000000e //ADC Attenuation ADCL
+#define ADC_ATTEN_ADCR 0x0000000f //ADC Attenuation ADCR
+#define ADC_ALC_CTRL1 0x00000010 //ADC ALC Control 1
+#define ADC_ALC_CTRL2 0x00000011 //ADC ALC Control 2
+#define ADC_ALC_CTRL3 0x00000012 //ADC ALC Control 3
+#define ADC_NOISE_CTRL 0x00000013 //ADC Noise Gate Control
+#define ADC_LIMIT_CTRL 0x00000014 //ADC Limiter Control
+#define ADC_MUX 0x00000015 //ADC Mux offset
+
+#if 0
+/* FIXME: Not tested yet. */
+#define ADC_GAIN_MASK 0x000000ff //Mask for ADC Gain
+#define ADC_ZERODB 0x000000cf //Value to set ADC to 0dB
+#define ADC_MUTE_MASK 0x000000c0 //Mask for ADC mute
+#define ADC_MUTE 0x000000c0 //Value to mute ADC
+#define ADC_OSR 0x00000008 //Mask for ADC oversample rate select
+#define ADC_TIMEOUT_DISABLE 0x00000008 //Value and mask to disable Timeout clock
+#define ADC_HPF_DISABLE 0x00000100 //Value and mask to disable High pass filter
+#define ADC_TRANWIN_MASK 0x00000070 //Mask for Length of Transient Window
+#endif
+
+#define ADC_MUX_MASK 0x0000000f //Mask for ADC Mux
+#define ADC_MUX_MIC 0x00000002 //Value to select Mic at ADC Mux
+#define ADC_MUX_LINEIN 0x00000004 //Value to select LineIn at ADC Mux
+#define ADC_MUX_PHONE 0x00000001 //Value to select TAD at ADC Mux (Not used)
+#define ADC_MUX_AUX 0x00000008 //Value to select Aux at ADC Mux
#define SET_CHANNEL 0 /* Testing channel outputs 0=Front, 1=Center/LFE, 2=Unknown, 3=Rear */
#define PCM_FRONT_CHANNEL 0
@@ -513,6 +562,7 @@ typedef struct {
char * name;
int ac97;
int gpio_type;
+ int i2c_adc;
} ca0106_details_t;
// definition of the chip-specific record
@@ -555,3 +605,6 @@ void snd_ca0106_ptr_write(ca0106_t *emu,
unsigned int chn,
unsigned int data);
+int snd_ca0106_i2c_write(ca0106_t *emu, u32 reg, u32 value);
+
+