[ALSA] Add echoaudio sound drivers

From: Giuliano Pochini <pochini@shiny.it>Add echoaudio sound drivers (darla20, darla24, echo3g, gina20, gina24,
indigo, indigodj, indigoio, layla20, lala24, mia, mona)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

1 files changed, 198 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/echoaudio_gml.c b/sound/pci/echoaudio/echoaudio_gml.c
new file mode 100644
index 00000000000..3aa37e76eba
--- /dev/null
+++ b/sound/pci/echoaudio/echoaudio_gml.c
@@ -0,0 +1,198 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software
+   Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+/* These functions are common for Gina24, Layla24 and Mona cards */
+
+
+/* ASIC status check - some cards have one or two ASICs that need to be
+loaded.  Once that load is complete, this function is called to see if
+the load was successful.
+If this load fails, it does not necessarily mean that the hardware is
+defective - the external box may be disconnected or turned off. */
+static int check_asic_status(struct echoaudio *chip)
+{
+	u32 asic_status;
+
+	send_vector(chip, DSP_VC_TEST_ASIC);
+
+	/* The DSP will return a value to indicate whether or not the
+	   ASIC is currently loaded */
+	if (read_dsp(chip, &asic_status) < 0) {
+		DE_INIT(("check_asic_status: failed on read_dsp\n"));
+		chip->asic_loaded = FALSE;
+		return -EIO;
+	}
+
+	chip->asic_loaded = (asic_status == ASIC_ALREADY_LOADED);
+	return chip->asic_loaded ? 0 : -EIO;
+}
+
+
+
+/* Most configuration of Gina24, Layla24, or Mona is accomplished by writing
+the control register.  write_control_reg sends the new control register
+value to the DSP. */
+static int write_control_reg(struct echoaudio *chip, u32 value, char force)
+{
+	/* Handle the digital input auto-mute */
+	if (chip->digital_in_automute)
+		value |= GML_DIGITAL_IN_AUTO_MUTE;
+	else
+		value &= ~GML_DIGITAL_IN_AUTO_MUTE;
+
+	DE_ACT(("write_control_reg: 0x%x\n", value));
+
+	/* Write the control register */
+	value = cpu_to_le32(value);
+	if (value != chip->comm_page->control_register || force) {
+		if (wait_handshake(chip))
+			return -EIO;
+		chip->comm_page->control_register = value;
+		clear_handshake(chip);
+		return send_vector(chip, DSP_VC_WRITE_CONTROL_REG);
+	}
+	return 0;
+}
+
+
+
+/* Gina24, Layla24, and Mona support digital input auto-mute.  If the digital
+input auto-mute is enabled, the DSP will only enable the digital inputs if
+the card is syncing to a valid clock on the ADAT or S/PDIF inputs.
+If the auto-mute is disabled, the digital inputs are enabled regardless of
+what the input clock is set or what is connected. */
+static int set_input_auto_mute(struct echoaudio *chip, int automute)
+{
+	DE_ACT(("set_input_auto_mute %d\n", automute));
+
+	chip->digital_in_automute = automute;
+
+	/* Re-set the input clock to the current value - indirectly causes
+	the auto-mute flag to be sent to the DSP */
+	return set_input_clock(chip, chip->input_clock);
+}
+
+
+
+/* S/PDIF coax / S/PDIF optical / ADAT - switch */
+static int set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u8 previous_mode;
+	int err, i, o;
+
+	if (chip->bad_board)
+		return -EIO;
+
+	/* All audio channels must be closed before changing the digital mode */
+	snd_assert(!chip->pipe_alloc_mask, return -EAGAIN);
+
+	snd_assert(chip->digital_modes & (1 << mode), return -EINVAL);
+
+	previous_mode = chip->digital_mode;
+	err = dsp_set_digital_mode(chip, mode);
+
+	/* If we successfully changed the digital mode from or to ADAT,
+	   then make sure all output, input and monitor levels are
+	   updated by the DSP comm object. */
+	if (err >= 0 && previous_mode != mode &&
+	    (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) {
+		spin_lock_irq(&chip->lock);
+		for (o = 0; o < num_busses_out(chip); o++)
+			for (i = 0; i < num_busses_in(chip); i++)
+				set_monitor_gain(chip, o, i,
+						 chip->monitor_gain[o][i]);
+
+#ifdef ECHOCARD_HAS_INPUT_GAIN
+		for (i = 0; i < num_busses_in(chip); i++)
+			set_input_gain(chip, i, chip->input_gain[i]);
+		update_input_line_level(chip);
+#endif
+
+		for (o = 0; o < num_busses_out(chip); o++)
+			set_output_gain(chip, o, chip->output_gain[o]);
+		update_output_line_level(chip);
+		spin_unlock_irq(&chip->lock);
+	}
+
+	return err;
+}
+
+
+
+/* Set the S/PDIF output format */
+static int set_professional_spdif(struct echoaudio *chip, char prof)
+{
+	u32 control_reg;
+	int err;
+
+	/* Clear the current S/PDIF flags */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_SPDIF_FORMAT_CLEAR_MASK;
+
+	/* Set the new S/PDIF flags depending on the mode */
+	control_reg |= GML_SPDIF_TWO_CHANNEL | GML_SPDIF_24_BIT |
+		GML_SPDIF_COPY_PERMIT;
+	if (prof) {
+		/* Professional mode */
+		control_reg |= GML_SPDIF_PRO_MODE;
+
+		switch (chip->sample_rate) {
+		case 32000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+				GML_SPDIF_SAMPLE_RATE1;
+			break;
+		case 44100:
+			control_reg |= GML_SPDIF_SAMPLE_RATE0;
+			break;
+		case 48000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE1;
+			break;
+		}
+	} else {
+		/* Consumer mode */
+		switch (chip->sample_rate) {
+		case 32000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE0 |
+				GML_SPDIF_SAMPLE_RATE1;
+			break;
+		case 48000:
+			control_reg |= GML_SPDIF_SAMPLE_RATE1;
+			break;
+		}
+	}
+
+	if ((err = write_control_reg(chip, control_reg, FALSE)))
+		return err;
+	chip->professional_spdif = prof;
+	DE_ACT(("set_professional_spdif to %s\n",
+		prof ? "Professional" : "Consumer"));
+	return 0;
+}