Merge branch 'master' of /home/trondmy/kernel/linux-2.6/

1 files changed, 394 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/layla24_dsp.c b/sound/pci/echoaudio/layla24_dsp.c
new file mode 100644
index 00000000000..7ec5b63d0dc
--- /dev/null
+++ b/sound/pci/echoaudio/layla24_dsp.c
@@ -0,0 +1,394 @@
+/****************************************************************************
+
+   Copyright Echo Digital Audio Corporation (c) 1998 - 2004
+   All rights reserved
+   www.echoaudio.com
+
+   This file is part of Echo Digital Audio's generic driver library.
+
+   Echo Digital Audio's generic driver library is free software;
+   you can redistribute it and/or modify it under the terms of
+   the GNU General Public License as published by the Free Software Foundation.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+   MA  02111-1307, USA.
+
+   *************************************************************************
+
+ Translation from C++ and adaptation for use in ALSA-Driver
+ were made by Giuliano Pochini <pochini@shiny.it>
+
+****************************************************************************/
+
+
+static int write_control_reg(struct echoaudio *chip, u32 value, char force);
+static int set_input_clock(struct echoaudio *chip, u16 clock);
+static int set_professional_spdif(struct echoaudio *chip, char prof);
+static int set_digital_mode(struct echoaudio *chip, u8 mode);
+static int load_asic_generic(struct echoaudio *chip, u32 cmd,
+			     const struct firmware *asic);
+static int check_asic_status(struct echoaudio *chip);
+
+
+static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
+{
+	int err;
+
+	DE_INIT(("init_hw() - Layla24\n"));
+	snd_assert((subdevice_id & 0xfff0) == LAYLA24, return -ENODEV);
+
+	if ((err = init_dsp_comm_page(chip))) {
+		DE_INIT(("init_hw - could not initialize DSP comm page\n"));
+		return err;
+	}
+
+	chip->device_id = device_id;
+	chip->subdevice_id = subdevice_id;
+	chip->bad_board = TRUE;
+	chip->has_midi = TRUE;
+	chip->dsp_code_to_load = &card_fw[FW_LAYLA24_DSP];
+	chip->input_clock_types =
+		ECHO_CLOCK_BIT_INTERNAL | ECHO_CLOCK_BIT_SPDIF |
+		ECHO_CLOCK_BIT_WORD | ECHO_CLOCK_BIT_ADAT;
+	chip->digital_modes =
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_RCA |
+		ECHOCAPS_HAS_DIGITAL_MODE_SPDIF_OPTICAL |
+		ECHOCAPS_HAS_DIGITAL_MODE_ADAT;
+	chip->digital_mode =		DIGITAL_MODE_SPDIF_RCA;
+	chip->professional_spdif = FALSE;
+	chip->digital_in_automute = TRUE;
+
+	if ((err = load_firmware(chip)) < 0)
+		return err;
+	chip->bad_board = FALSE;
+
+	if ((err = init_line_levels(chip)) < 0)
+		return err;
+
+	err = set_digital_mode(chip, DIGITAL_MODE_SPDIF_RCA);
+	snd_assert(err >= 0, return err);
+	err = set_professional_spdif(chip, TRUE);
+
+	DE_INIT(("init_hw done\n"));
+	return err;
+}
+
+
+
+static u32 detect_input_clocks(const struct echoaudio *chip)
+{
+	u32 clocks_from_dsp, clock_bits;
+
+	/* Map the DSP clock detect bits to the generic driver clock detect bits */
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	clock_bits = ECHO_CLOCK_BIT_INTERNAL;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_SPDIF)
+		clock_bits |= ECHO_CLOCK_BIT_SPDIF;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_ADAT)
+		clock_bits |= ECHO_CLOCK_BIT_ADAT;
+
+	if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD)
+		clock_bits |= ECHO_CLOCK_BIT_WORD;
+
+	return clock_bits;
+}
+
+
+
+/* Layla24 has an ASIC on the PCI card and another ASIC in the external box;
+both need to be loaded. */
+static int load_asic(struct echoaudio *chip)
+{
+	int err;
+
+	if (chip->asic_loaded)
+		return 1;
+
+	DE_INIT(("load_asic\n"));
+
+	/* Give the DSP a few milliseconds to settle down */
+	mdelay(10);
+
+	/* Load the ASIC for the PCI card */
+	err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_PCI_CARD_ASIC,
+				&card_fw[FW_LAYLA24_1_ASIC]);
+	if (err < 0)
+		return err;
+
+	chip->asic_code = &card_fw[FW_LAYLA24_2S_ASIC];
+
+	/* Now give the new ASIC a little time to set up */
+	mdelay(10);
+
+	/* Do the external one */
+	err = load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+				&card_fw[FW_LAYLA24_2S_ASIC]);
+	if (err < 0)
+		return FALSE;
+
+	/* Now give the external ASIC a little time to set up */
+	mdelay(10);
+
+	/* See if it worked */
+	err = check_asic_status(chip);
+
+	/* Set up the control register if the load succeeded -
+	   48 kHz, internal clock, S/PDIF RCA mode */
+	if (!err)
+		err = write_control_reg(chip, GML_CONVERTER_ENABLE | GML_48KHZ,
+					TRUE);
+	
+	DE_INIT(("load_asic() done\n"));
+	return err;
+}
+
+
+
+static int set_sample_rate(struct echoaudio *chip, u32 rate)
+{
+	u32 control_reg, clock, base_rate;
+
+	snd_assert(rate < 50000 || chip->digital_mode != DIGITAL_MODE_ADAT,
+		   return -EINVAL);
+
+	/* Only set the clock for internal mode. */
+	if (chip->input_clock != ECHO_CLOCK_INTERNAL) {
+		DE_ACT(("set_sample_rate: Cannot set sample rate - "
+			"clock not set to CLK_CLOCKININTERNAL\n"));
+		/* Save the rate anyhow */
+		chip->comm_page->sample_rate = cpu_to_le32(rate);
+		chip->sample_rate = rate;
+		return 0;
+	}
+
+	/* Get the control register & clear the appropriate bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_CLOCK_CLEAR_MASK & GML_SPDIF_RATE_CLEAR_MASK;
+
+	clock = 0;
+
+	switch (rate) {
+	case 96000:
+		clock = GML_96KHZ;
+		break;
+	case 88200:
+		clock = GML_88KHZ;
+		break;
+	case 48000:
+		clock = GML_48KHZ | GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 44100:
+		clock = GML_44KHZ;
+		/* Professional mode */
+		if (control_reg & GML_SPDIF_PRO_MODE)
+			clock |= GML_SPDIF_SAMPLE_RATE0;
+		break;
+	case 32000:
+		clock = GML_32KHZ | GML_SPDIF_SAMPLE_RATE0 |
+			GML_SPDIF_SAMPLE_RATE1;
+		break;
+	case 22050:
+		clock = GML_22KHZ;
+		break;
+	case 16000:
+		clock = GML_16KHZ;
+		break;
+	case 11025:
+		clock = GML_11KHZ;
+		break;
+	case 8000:
+		clock = GML_8KHZ;
+		break;
+	default:
+		/* If this is a non-standard rate, then the driver needs to
+		use Layla24's special "continuous frequency" mode */
+		clock = LAYLA24_CONTINUOUS_CLOCK;
+		if (rate > 50000) {
+			base_rate = rate >> 1;
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		} else {
+			base_rate = rate;
+		}
+
+		if (base_rate < 25000)
+			base_rate = 25000;
+
+		if (wait_handshake(chip))
+			return -EIO;
+
+		chip->comm_page->sample_rate =
+			cpu_to_le32(LAYLA24_MAGIC_NUMBER / base_rate - 2);
+
+		clear_handshake(chip);
+		send_vector(chip, DSP_VC_SET_LAYLA24_FREQUENCY_REG);
+	}
+
+	control_reg |= clock;
+
+	chip->comm_page->sample_rate = cpu_to_le32(rate);	/* ignored by the DSP ? */
+	chip->sample_rate = rate;
+	DE_ACT(("set_sample_rate: %d clock %d\n", rate, control_reg));
+
+	return write_control_reg(chip, control_reg, FALSE);
+}
+
+
+
+static int set_input_clock(struct echoaudio *chip, u16 clock)
+{
+	u32 control_reg, clocks_from_dsp;
+
+	/* Mask off the clock select bits */
+	control_reg = le32_to_cpu(chip->comm_page->control_register) &
+		GML_CLOCK_CLEAR_MASK;
+	clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks);
+
+	/* Pick the new clock */
+	switch (clock) {
+	case ECHO_CLOCK_INTERNAL:
+		DE_ACT(("Set Layla24 clock to INTERNAL\n"));
+		chip->input_clock = ECHO_CLOCK_INTERNAL;
+		return set_sample_rate(chip, chip->sample_rate);
+	case ECHO_CLOCK_SPDIF:
+		if (chip->digital_mode == DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_SPDIF_CLOCK;
+		/* Layla24 doesn't support 96KHz S/PDIF */
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		DE_ACT(("Set Layla24 clock to SPDIF\n"));
+		break;
+	case ECHO_CLOCK_WORD:
+		control_reg |= GML_WORD_CLOCK;
+		if (clocks_from_dsp & GML_CLOCK_DETECT_BIT_WORD96)
+			control_reg |= GML_DOUBLE_SPEED_MODE;
+		else
+			control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		DE_ACT(("Set Layla24 clock to WORD\n"));
+		break;
+	case ECHO_CLOCK_ADAT:
+		if (chip->digital_mode != DIGITAL_MODE_ADAT)
+			return -EAGAIN;
+		control_reg |= GML_ADAT_CLOCK;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		DE_ACT(("Set Layla24 clock to ADAT\n"));
+		break;
+	default:
+		DE_ACT(("Input clock 0x%x not supported for Layla24\n", clock));
+		return -EINVAL;
+	}
+
+	chip->input_clock = clock;
+	return write_control_reg(chip, control_reg, TRUE);
+}
+
+
+
+/* Depending on what digital mode you want, Layla24 needs different ASICs
+loaded.  This function checks the ASIC needed for the new mode and sees
+if it matches the one already loaded. */
+static int switch_asic(struct echoaudio *chip, const struct firmware *asic)
+{
+	s8 *monitors;
+
+	/*  Check to see if this is already loaded */
+	if (asic != chip->asic_code) {
+		monitors = kmalloc(MONITOR_ARRAY_SIZE, GFP_KERNEL);
+		if (! monitors)
+			return -ENOMEM;
+
+		memcpy(monitors, chip->comm_page->monitors, MONITOR_ARRAY_SIZE);
+		memset(chip->comm_page->monitors, ECHOGAIN_MUTED,
+		       MONITOR_ARRAY_SIZE);
+
+		/* Load the desired ASIC */
+		if (load_asic_generic(chip, DSP_FNC_LOAD_LAYLA24_EXTERNAL_ASIC,
+				      asic) < 0) {
+			memcpy(chip->comm_page->monitors, monitors,
+			       MONITOR_ARRAY_SIZE);
+			kfree(monitors);
+			return -EIO;
+		}
+		chip->asic_code = asic;
+		memcpy(chip->comm_page->monitors, monitors, MONITOR_ARRAY_SIZE);
+		kfree(monitors);
+	}
+
+	return 0;
+}
+
+
+
+static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode)
+{
+	u32 control_reg;
+	int err, incompatible_clock;
+	const struct firmware *asic;
+
+	/* Set clock to "internal" if it's not compatible with the new mode */
+	incompatible_clock = FALSE;
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+	case DIGITAL_MODE_SPDIF_RCA:
+		if (chip->input_clock == ECHO_CLOCK_ADAT)
+			incompatible_clock = TRUE;
+		asic = &card_fw[FW_LAYLA24_2S_ASIC];
+		break;
+	case DIGITAL_MODE_ADAT:
+		if (chip->input_clock == ECHO_CLOCK_SPDIF)
+			incompatible_clock = TRUE;
+		asic = &card_fw[FW_LAYLA24_2A_ASIC];
+		break;
+	default:
+		DE_ACT(("Digital mode not supported: %d\n", mode));
+		return -EINVAL;
+	}
+
+	if (incompatible_clock) {	/* Switch to 48KHz, internal */
+		chip->sample_rate = 48000;
+		spin_lock_irq(&chip->lock);
+		set_input_clock(chip, ECHO_CLOCK_INTERNAL);
+		spin_unlock_irq(&chip->lock);
+	}
+
+	/* switch_asic() can sleep */
+	if (switch_asic(chip, asic) < 0)
+		return -EIO;
+
+	spin_lock_irq(&chip->lock);
+
+	/* Tweak the control register */
+	control_reg = le32_to_cpu(chip->comm_page->control_register);
+	control_reg &= GML_DIGITAL_MODE_CLEAR_MASK;
+
+	switch (mode) {
+	case DIGITAL_MODE_SPDIF_OPTICAL:
+		control_reg |= GML_SPDIF_OPTICAL_MODE;
+		break;
+	case DIGITAL_MODE_SPDIF_RCA:
+		/* GML_SPDIF_OPTICAL_MODE bit cleared */
+		break;
+	case DIGITAL_MODE_ADAT:
+		control_reg |= GML_ADAT_MODE;
+		control_reg &= ~GML_DOUBLE_SPEED_MODE;
+		break;
+	}
+
+	err = write_control_reg(chip, control_reg, TRUE);
+	spin_unlock_irq(&chip->lock);
+	if (err < 0)
+		return err;
+	chip->digital_mode = mode;
+
+	DE_ACT(("set_digital_mode to %d\n", mode));
+	return incompatible_clock;
+}