Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 138 insertions, 0 deletions

diff --git a/sound/pci/ice1712/phase.c b/sound/pci/ice1712/phase.c
new file mode 100644
index 00000000000..d1f90832443
--- /dev/null
+++ b/sound/pci/ice1712/phase.c
@@ -0,0 +1,138 @@
+/*
+ *   ALSA driver for ICEnsemble ICE1724 (Envy24)
+ *
+ *   Lowlevel functions for Terratec PHASE 22
+ *
+ *	Copyright (c) 2005 Misha Zhilin <misha@epiphan.com>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* PHASE 22 overview:
+ *   Audio controller: VIA Envy24HT-S (slightly trimmed down version of Envy24HT)
+ *   Analog chip: AK4524 (partially via Philip's 74HCT125)
+ *   Digital receiver: CS8414-CS (not supported in this release)
+ *
+ *   Envy connects to AK4524
+ *	- CS directly from GPIO 10
+ *	- CCLK via 74HCT125's gate #4 from GPIO 4
+ *	- CDTI via 74HCT125's gate #2 from GPIO 5
+ *		CDTI may be completely blocked by 74HCT125's gate #1 controlled by GPIO 3
+ */
+
+#include <sound/driver.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "phase.h"
+
+static akm4xxx_t akm_phase22 __devinitdata = {
+	.type = SND_AK4524,
+	.num_dacs = 2,
+	.num_adcs = 2,
+};
+
+static struct snd_ak4xxx_private akm_phase22_priv __devinitdata = {
+	.caddr =	2,
+	.cif =		1,
+	.data_mask =	1 << 4,
+	.clk_mask =	1 << 5,
+	.cs_mask =	1 << 10,
+	.cs_addr =	1 << 10,
+	.cs_none =	0,
+	.add_flags = 	1 << 3,
+	.mask_flags =	0,
+};
+
+static int __devinit phase22_init(ice1712_t *ice)
+{
+	akm4xxx_t *ak;
+	int err;
+
+	// Configure DAC/ADC description for generic part of ice1724
+	switch (ice->eeprom.subvendor) {
+	case VT1724_SUBDEVICE_PHASE22:
+		ice->num_total_dacs = 2;
+		ice->num_total_adcs = 2;
+		ice->vt1720 = 1; // Envy24HT-S have 16 bit wide GPIO
+		break;
+	default:
+		snd_BUG();
+		return -EINVAL;
+	}
+
+	// Initialize analog chips
+	ak = ice->akm = kcalloc(1, sizeof(akm4xxx_t), GFP_KERNEL);
+	if (! ak)
+		return -ENOMEM;
+	ice->akm_codecs = 1;
+	switch (ice->eeprom.subvendor) {
+	case VT1724_SUBDEVICE_PHASE22:
+		if ((err = snd_ice1712_akm4xxx_init(ak, &akm_phase22, &akm_phase22_priv, ice)) < 0)
+			return err;
+		break;
+	}
+
+	return 0;
+}
+
+static int __devinit phase22_add_controls(ice1712_t *ice)
+{
+	int err = 0;
+
+	switch (ice->eeprom.subvendor) {
+	case VT1724_SUBDEVICE_PHASE22:
+		err = snd_ice1712_akm4xxx_build_controls(ice);
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+
+static unsigned char phase22_eeprom[] __devinitdata = {
+	0x00,	/* SYSCONF: 1xADC, 1xDACs */
+	0x80,	/* ACLINK: I2S */
+	0xf8,	/* I2S: vol, 96k, 24bit*/
+	0xc3,	/* SPDIF: out-en, out-int, spdif-in */
+	0xFF,	/* GPIO_DIR */
+	0xFF,	/* GPIO_DIR1 */
+	0xFF,	/* GPIO_DIR2 */
+	0x00,	/* GPIO_MASK */
+	0x00,	/* GPIO_MASK1 */
+	0x00,	/* GPIO_MASK2 */
+	0x00,	/* GPIO_STATE: */
+	0x00,	/* GPIO_STATE1: */
+	0x00,	/* GPIO_STATE2 */
+};
+
+struct snd_ice1712_card_info snd_vt1724_phase_cards[] __devinitdata = {
+	{
+		.subvendor = VT1724_SUBDEVICE_PHASE22,
+		.name = "Terratec PHASE 22",
+		.model = "phase22",
+		.chip_init = phase22_init,
+		.build_controls = phase22_add_controls,
+		.eeprom_size = sizeof(phase22_eeprom),
+		.eeprom_data = phase22_eeprom,
+	},
+	{ } /* terminator */
+};