Merge branch 'linus' into tracing/core

Merge reason: tracing/core was on a .30-rc1 base and was missing out on
              on a handful of tracing fixes present in .30-rc5-almost.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 78 insertions, 27 deletions

diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 57648810eaf..173bebf9f51 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -355,6 +355,9 @@ struct ichdev {
         unsigned int fragsize1;
         unsigned int position;
 	unsigned int pos_shift;
+	unsigned int last_pos;
+	unsigned long last_pos_jiffies;
+	unsigned int jiffy_to_bytes;
         int frags;
         int lvi;
         int lvi_frag;
@@ -838,7 +841,10 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd
 		ichdev->suspended = 0;
 		/* fallthru */
 	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		val = ICH_IOCE | ICH_STARTBM;
+		ichdev->last_pos = ichdev->position;
+		ichdev->last_pos_jiffies = jiffies;
 		break;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 		ichdev->suspended = 1;
@@ -849,9 +855,6 @@ static int snd_intel8x0_pcm_trigger(struct snd_pcm_substream *substream, int cmd
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		val = ICH_IOCE;
 		break;
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		val = ICH_IOCE | ICH_STARTBM;
-		break;
 	default:
 		return -EINVAL;
 	}
@@ -1045,6 +1048,7 @@ static int snd_intel8x0_pcm_prepare(struct snd_pcm_substream *substream)
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
+	ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
 	return 0;
 }
 
@@ -1053,7 +1057,7 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs
 	struct intel8x0 *chip = snd_pcm_substream_chip(substream);
 	struct ichdev *ichdev = get_ichdev(substream);
 	size_t ptr1, ptr;
-	int civ, timeout = 100;
+	int civ, timeout = 10;
 	unsigned int position;
 
 	spin_lock(&chip->reg_lock);
@@ -1069,9 +1073,19 @@ static snd_pcm_uframes_t snd_intel8x0_pcm_pointer(struct snd_pcm_substream *subs
 		    ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
 			break;
 	} while (timeout--);
-	ptr1 <<= ichdev->pos_shift;
-	ptr = ichdev->fragsize1 - ptr1;
-	ptr += position;
+	if (ptr1 != 0) {
+		ptr1 <<= ichdev->pos_shift;
+		ptr = ichdev->fragsize1 - ptr1;
+		ptr += position;
+		ichdev->last_pos = ptr;
+		ichdev->last_pos_jiffies = jiffies;
+	} else {
+		ptr1 = jiffies - ichdev->last_pos_jiffies;
+		if (ptr1)
+			ptr1 -= 1;
+		ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
+		ptr %= ichdev->size;
+	}
 	spin_unlock(&chip->reg_lock);
 	if (ptr >= ichdev->size)
 		return 0;
@@ -1840,6 +1854,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 	},
 	{
 		.subvendor = 0x1028,
+		.subdevice = 0x016a,
+		.name = "Dell Inspiron 8600",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
+	{
+		.subvendor = 0x1028,
 		.subdevice = 0x0186,
 		.name = "Dell Latitude D810", /* cf. Malone #41015 */
 		.type = AC97_TUNE_HP_MUTE_LED
@@ -1882,12 +1902,6 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 	},
 	{
 		.subvendor = 0x103c,
-		.subdevice = 0x0934,
-		.name = "HP nx8220",
-		.type = AC97_TUNE_MUTE_LED
-	},
-	{
-		.subvendor = 0x103c,
 		.subdevice = 0x129d,
 		.name = "HP xw8000",
 		.type = AC97_TUNE_HP_ONLY
@@ -2661,12 +2675,14 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	struct snd_pcm_substream *subs;
 	struct ichdev *ichdev;
 	unsigned long port;
-	unsigned long pos, t;
-	struct timeval start_time, stop_time;
+	unsigned long pos, pos1, t;
+	int civ, timeout = 1000, attempt = 1;
+	struct timespec start_time, stop_time;
 
 	if (chip->ac97_bus->clock != 48000)
 		return; /* specified in module option */
 
+      __again:
 	subs = chip->pcm[0]->streams[0].substream;
 	if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
 		snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
@@ -2674,7 +2690,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	}
 	ichdev = &chip->ichd[ICHD_PCMOUT];
 	ichdev->physbuf = subs->dma_buffer.addr;
-	ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE;
+	ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE;
 	ichdev->substream = NULL; /* don't process interrupts */
 
 	/* set rate */
@@ -2693,16 +2709,31 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 		iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE);
 		iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot);
 	}
-	do_gettimeofday(&start_time);
+	do_posix_clock_monotonic_gettime(&start_time);
 	spin_unlock_irq(&chip->reg_lock);
 	msleep(50);
 	spin_lock_irq(&chip->reg_lock);
 	/* check the position */
-	pos = ichdev->fragsize1;
-	pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift;
-	pos += ichdev->position;
+	do {
+		civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV);
+		pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb);
+		if (pos1 == 0) {
+			udelay(10);
+			continue;
+		}
+		if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
+		    pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+			break;
+	} while (timeout--);
+	if (pos1 == 0) {	/* oops, this value is not reliable */
+		pos = 0;
+	} else {
+		pos = ichdev->fragsize1;
+		pos -= pos1 << ichdev->pos_shift;
+		pos += ichdev->position;
+	}
 	chip->in_measurement = 0;
-	do_gettimeofday(&stop_time);
+	do_posix_clock_monotonic_gettime(&stop_time);
 	/* stop */
 	if (chip->device_type == DEVICE_ALI) {
 		iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16));
@@ -2717,22 +2748,42 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip)
 	iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
 	spin_unlock_irq(&chip->reg_lock);
 
+	if (pos == 0) {
+		snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+	      __retry:
+		if (attempt < 3) {
+			msleep(300);
+			attempt++;
+			goto __again;
+		}
+		goto __end;
+	}
+
+	pos /= 4;
 	t = stop_time.tv_sec - start_time.tv_sec;
 	t *= 1000000;
-	t += stop_time.tv_usec - start_time.tv_usec;
-	printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t);
+	t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
+	printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
 	if (t == 0) {
-		snd_printk(KERN_ERR "?? calculation error..\n");
-		return;
+		snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
+		goto __retry;
 	}
-	pos = (pos / 4) * 1000;
+	pos *= 1000;
 	pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
-	if (pos < 40000 || pos >= 60000) 
+	if (pos < 40000 || pos >= 60000) {
 		/* abnormal value. hw problem? */
 		printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
+		goto __retry;
+	} else if (pos > 40500 && pos < 41500)
+		/* first exception - 41000Hz reference clock */
+		chip->ac97_bus->clock = 41000;
+	else if (pos > 43600 && pos < 44600)
+		/* second exception - 44100HZ reference clock */
+		chip->ac97_bus->clock = 44100;
 	else if (pos < 47500 || pos > 48500)
 		/* not 48000Hz, tuning the clock.. */
 		chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
+      __end:
 	printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
 	snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
 }