Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 145 insertions, 0 deletions

diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h
new file mode 100644
index 00000000000..25190cc88cf
--- /dev/null
+++ b/sound/pci/mixart/mixart_hwdep.h
@@ -0,0 +1,145 @@
+/*
+ * Driver for Digigram miXart soundcards
+ *
+ * definitions and makros for basic card access
+ *
+ * Copyright (c) 2003 by Digigram <alsa@digigram.com>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef __SOUND_MIXART_HWDEP_H
+#define __SOUND_MIXART_HWDEP_H
+
+#include <sound/hwdep.h>
+
+#define readl_be(x) be32_to_cpu(__raw_readl(x))
+#define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+
+#define readl_le(x) le32_to_cpu(__raw_readl(x))
+#define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
+
+#define MIXART_MEM(mgr,x)	((mgr)->mem[0].virt + (x))
+#define MIXART_REG(mgr,x)	((mgr)->mem[1].virt + (x))
+
+
+/* Daughter board Type */
+#define DAUGHTER_TYPE_MASK     0x0F 
+#define DAUGHTER_VER_MASK      0xF0 
+#define DAUGHTER_TYPEVER_MASK  (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK)
+ 
+#define MIXART_DAUGHTER_TYPE_NONE     0x00 
+#define MIXART_DAUGHTER_TYPE_COBRANET 0x08 
+#define MIXART_DAUGHTER_TYPE_AES      0x0E
+
+
+
+#define MIXART_BA0_SIZE 	(16 * 1024 * 1024) /* 16M */
+#define MIXART_BA1_SIZE 	(4  * 1024)        /* 4k */
+
+/*
+ * -----------BAR 0 --------------------------------------------------------------------------------------------------------
+ */
+#define  MIXART_PSEUDOREG                          0x2000                    /* base address for pseudoregister */
+
+#define  MIXART_PSEUDOREG_BOARDNUMBER              MIXART_PSEUDOREG+0        /* board number */
+
+/* perfmeter (available when elf loaded)*/
+#define  MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET  MIXART_PSEUDOREG+0x70     /* streaming load */
+#define  MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET  MIXART_PSEUDOREG+0x78     /* system load (reference)*/
+#define  MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET  MIXART_PSEUDOREG+0x7C     /* mailbox load */
+#define  MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET  MIXART_PSEUDOREG+0x74     /* interrupt handling  load */
+
+/* motherboard xilinx loader info */
+#define  MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET    MIXART_PSEUDOREG+0x9C     /* 0x00600000 */ 
+#define  MIXART_PSEUDOREG_MXLX_SIZE_OFFSET         MIXART_PSEUDOREG+0xA0     /* xilinx size in bytes */ 
+#define  MIXART_PSEUDOREG_MXLX_STATUS_OFFSET       MIXART_PSEUDOREG+0xA4     /* status = EMBEBBED_STAT_XXX */ 
+
+/* elf loader info */
+#define  MIXART_PSEUDOREG_ELF_STATUS_OFFSET        MIXART_PSEUDOREG+0xB0     /* status = EMBEBBED_STAT_XXX */ 
+
+/* 
+*  after the elf code is loaded, and the flowtable info was passed to it,
+*  the driver polls on this address, until it shows 1 (presence) or 2 (absence)
+*  once it is non-zero, the daughter board type may be read
+*/
+#define  MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET     MIXART_PSEUDOREG+0x990   
+
+/* Global info structure */
+#define  MIXART_PSEUDOREG_DBRD_TYPE_OFFSET         MIXART_PSEUDOREG+0x994    /* Type and version of daughterboard  */
+
+
+/* daughterboard xilinx loader info */
+#define  MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET    MIXART_PSEUDOREG+0x998    /* get the address here where to write the file */ 
+#define  MIXART_PSEUDOREG_DXLX_SIZE_OFFSET         MIXART_PSEUDOREG+0x99C    /* xilinx size in bytes */ 
+#define  MIXART_PSEUDOREG_DXLX_STATUS_OFFSET       MIXART_PSEUDOREG+0x9A0    /* status = EMBEBBED_STAT_XXX */ 
+
+/*  */
+#define  MIXART_FLOWTABLE_PTR                      0x3000                    /* pointer to flow table */
+
+/* mailbox addresses  */
+
+/* message DRV -> EMB */
+#define MSG_INBOUND_POST_HEAD       0x010008	/* DRV posts MF + increment4 */
+#define	MSG_INBOUND_POST_TAIL       0x01000C	/* EMB gets MF + increment4 */
+/* message EMB -> DRV */
+#define	MSG_OUTBOUND_POST_TAIL      0x01001C	/* DRV gets MF + increment4 */
+#define	MSG_OUTBOUND_POST_HEAD      0x010018	/* EMB posts MF + increment4 */
+/* Get Free Frames */
+#define MSG_INBOUND_FREE_TAIL       0x010004	/* DRV gets MFA + increment4 */
+#define MSG_OUTBOUND_FREE_TAIL      0x010014	/* EMB gets MFA + increment4 */
+/* Put Free Frames */
+#define MSG_OUTBOUND_FREE_HEAD      0x010010	/* DRV puts MFA + increment4 */
+#define MSG_INBOUND_FREE_HEAD       0x010000    /* EMB puts MFA + increment4 */
+
+/* firmware addresses of the message fifos */
+#define MSG_BOUND_STACK_SIZE        0x004000    /* size of each following stack */
+/* posted messages */
+#define MSG_OUTBOUND_POST_STACK     0x108000    /* stack of messages to the DRV */
+#define MSG_INBOUND_POST_STACK      0x104000    /* stack of messages to the EMB */
+/* available empty messages */
+#define MSG_OUTBOUND_FREE_STACK     0x10C000    /* stack of free enveloped for EMB */
+#define MSG_INBOUND_FREE_STACK      0x100000    /* stack of free enveloped for DRV */
+
+
+/* defines for mailbox message frames */
+#define MSG_FRAME_OFFSET            0x64
+#define MSG_FRAME_SIZE              0x6400
+#define MSG_FRAME_NUMBER            32
+#define MSG_FROM_AGENT_ITMF_OFFSET  (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER))
+#define MSG_TO_AGENT_ITMF_OFFSET    (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
+#define MSG_HOST_RSC_PROTECTION     (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE)
+#define MSG_AGENT_RSC_PROTECTION    (MSG_HOST_RSC_PROTECTION + 4)
+
+
+/*
+ * -----------BAR 1 --------------------------------------------------------------------------------------------------------
+ */
+
+/* interrupt addresses and constants */
+#define MIXART_PCI_OMIMR_OFFSET                 0x34    /* outbound message interrupt mask register */
+#define MIXART_PCI_OMISR_OFFSET                 0x30    /* outbound message interrupt status register */
+#define MIXART_PCI_ODBR_OFFSET                  0x60    /* outbound doorbell register */
+
+#define MIXART_BA1_BRUTAL_RESET_OFFSET          0x68    /* write 1 in LSBit to reset board */
+
+#define MIXART_HOST_ALL_INTERRUPT_MASKED        0x02B   /* 0000 0010 1011 */
+#define MIXART_ALLOW_OUTBOUND_DOORBELL          0x023   /* 0000 0010 0011 */
+#define MIXART_OIDI                             0x008   /* 0000 0000 1000 */
+
+
+int snd_mixart_setup_firmware(mixart_mgr_t *mgr);
+
+#endif /* __SOUND_MIXART_HWDEP_H */