diff options
| author | Lars-Peter Clausen <lars@metafoo.de> | 2014-02-17 13:16:56 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@linaro.org> | 2014-02-18 10:30:25 +0900 |
| commit | 0c2d6964562835501280409cac5d4ee28e07e8c2 (patch) | |
| tree | d00f9a8e13c5211f6759ac59642f8928b5c4a67d /sound/soc/blackfin | |
| parent | f96a5d3f1c09ce85ac1a90d733ca3585b9f2f70a (diff) | |
ASoC: adav80x: Split SPI and I2C code into different modules
There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
* We need to be extra careful to make sure to not build the driver into the
kernel if one of the subsystems is build as a module (Currently only I2C
can be build as a module).
* The module init path error handling is rather ugly. E.g. what should be
done if either the SPI or the I2C driver fails to register. Most drivers
that implement SPI and I2C in the same module currently fallback to
undefined behavior in that case. Splitting the the driver into two
modules, one for each bus, allows the registration of the other bus drive
to continue without problems if one of them fails.
This patch splits the ADAV80X driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'sound/soc/blackfin')
| -rw-r--r-- | sound/soc/blackfin/Kconfig | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index 54f74f8cbb7..18abd884d84 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -47,7 +47,8 @@ config SND_SOC_BFIN_EVAL_ADAV80X tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" depends on SND_BF5XX_I2S && (SPI_MASTER || I2C) select SND_BF5XX_SOC_I2S - select SND_SOC_ADAV80X + select SND_SOC_ADAV801 if SPI_MASTER + select SND_SOC_ADAV803 if I2C help Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or EVAL-ADAV803 board connected to one of the Blackfin evaluation boards |