Merge with mainline to remove plat-omap/Kconfig conflict

Conflicts:
	arch/arm/plat-omap/Kconfig

1 files changed, 75 insertions, 16 deletions

diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index ffe122d1cd7..dfbeb2db61b 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -28,6 +28,7 @@
 #include <sound/initval.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
+#include <linux/regulator/consumer.h>
 
 #include "cs4270.h"
 
@@ -106,6 +107,10 @@
 #define CS4270_MUTE_DAC_A	0x01
 #define CS4270_MUTE_DAC_B	0x02
 
+static const char *supply_names[] = {
+	"va", "vd", "vlc"
+};
+
 /* Private data for the CS4270 */
 struct cs4270_private {
 	struct snd_soc_codec codec;
@@ -114,6 +119,9 @@ struct cs4270_private {
 	unsigned int mode; /* The mode (I2S or left-justified) */
 	unsigned int slave_mode;
 	unsigned int manual_mute;
+
+	/* power domain regulators */
+	struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
 };
 
 /**
@@ -192,6 +200,11 @@ static struct cs4270_mode_ratios cs4270_mode_ratios[] = {
  * This function must be called by the machine driver's 'startup' function,
  * otherwise the list of supported sample rates will not be available in
  * time for ALSA.
+ *
+ * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause
+ * theoretically possible sample rates to be enabled. Call it again with a
+ * proper value set one the external clock is set (most probably you would do
+ * that from a machine's driver 'hw_param' hook.
  */
 static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 				 int clk_id, unsigned int freq, int dir)
@@ -205,20 +218,27 @@ static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 
 	cs4270->mclk = freq;
 
-	for (i = 0; i < NUM_MCLK_RATIOS; i++) {
-		unsigned int rate = freq / cs4270_mode_ratios[i].ratio;
-		rates |= snd_pcm_rate_to_rate_bit(rate);
-		if (rate < rate_min)
-			rate_min = rate;
-		if (rate > rate_max)
-			rate_max = rate;
-	}
-	/* FIXME: soc should support a rate list */
-	rates &= ~SNDRV_PCM_RATE_KNOT;
+	if (cs4270->mclk) {
+		for (i = 0; i < NUM_MCLK_RATIOS; i++) {
+			unsigned int rate = freq / cs4270_mode_ratios[i].ratio;
+			rates |= snd_pcm_rate_to_rate_bit(rate);
+			if (rate < rate_min)
+				rate_min = rate;
+			if (rate > rate_max)
+				rate_max = rate;
+		}
+		/* FIXME: soc should support a rate list */
+		rates &= ~SNDRV_PCM_RATE_KNOT;
 
-	if (!rates) {
-		dev_err(codec->dev, "could not find a valid sample rate\n");
-		return -EINVAL;
+		if (!rates) {
+			dev_err(codec->dev, "could not find a valid sample rate\n");
+			return -EINVAL;
+		}
+	} else {
+		/* enable all possible rates */
+		rates = SNDRV_PCM_RATE_8000_192000;
+		rate_min = 8000;
+		rate_max = 192000;
 	}
 
 	codec_dai->playback.rates = rates;
@@ -579,7 +599,8 @@ static int cs4270_probe(struct platform_device *pdev)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = cs4270_codec;
-	int ret;
+	struct cs4270_private *cs4270 = codec->private_data;
+	int i, ret;
 
 	/* Connect the codec to the socdev.  snd_soc_new_pcms() needs this. */
 	socdev->card->codec = codec;
@@ -599,8 +620,26 @@ static int cs4270_probe(struct platform_device *pdev)
 		goto error_free_pcms;
 	}
 
+	/* get the power supply regulators */
+	for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+		cs4270->supplies[i].supply = supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
+				 cs4270->supplies);
+	if (ret < 0)
+		goto error_free_pcms;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
+				    cs4270->supplies);
+	if (ret < 0)
+		goto error_free_regulators;
+
 	return 0;
 
+error_free_regulators:
+	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
+			    cs4270->supplies);
+
 error_free_pcms:
 	snd_soc_free_pcms(socdev);
 
@@ -616,8 +655,12 @@ error_free_pcms:
 static int cs4270_remove(struct platform_device *pdev)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = cs4270_codec;
+	struct cs4270_private *cs4270 = codec->private_data;
 
 	snd_soc_free_pcms(socdev);
+	regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
+	regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
 
 	return 0;
 };
@@ -799,17 +842,33 @@ MODULE_DEVICE_TABLE(i2c, cs4270_id);
 static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
 	struct snd_soc_codec *codec = cs4270_codec;
-	int reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+	struct cs4270_private *cs4270 = codec->private_data;
+	int reg, ret;
 
-	return snd_soc_write(codec, CS4270_PWRCTL, reg);
+	reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL;
+	if (reg < 0)
+		return reg;
+
+	ret = snd_soc_write(codec, CS4270_PWRCTL, reg);
+	if (ret < 0)
+		return ret;
+
+	regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies),
+			       cs4270->supplies);
+
+	return 0;
 }
 
 static int cs4270_soc_resume(struct platform_device *pdev)
 {
 	struct snd_soc_codec *codec = cs4270_codec;
+	struct cs4270_private *cs4270 = codec->private_data;
 	struct i2c_client *i2c_client = codec->control_data;
 	int reg;
 
+	regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
+			      cs4270->supplies);
+
 	/* In case the device was put to hard reset during sleep, we need to
 	 * wait 500ns here before any I2C communication. */
 	ndelay(500);