Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This contains pretty many small commits covering fairly large range of
  files in sound/ directory.  Partly because of additional API support
  and partly because of constantly developed ASoC and ARM stuff.

  Some highlights:

   - Introduced the helper function and documentation for exposing the
     channel map via control API, as discussed in Plumbers; most of PCI
     drivers are covered, will follow more drivers later

   - Most of drivers have been replaced with the new PM callbacks (if
     the bus is supported)

   - HD-audio controller got the support of runtime PM and the support
     of D3 clock-stop.  Also changing the power_save option in sysfs
     kicks off immediately to enable / disable the power-save mode.

   - Another significant code change in HD-audio is the rewrite of
     firmware loading code.  Other than that, most of changes in
     HD-audio are continued cleanups and standardization for the generic
     auto parser and bug fixes (HBR, device-specific fixups), in
     addition to the support of channel-map API.

   - Addition of ASoC bindings for the compressed API, used by the
     mid-x86 drivers.

   - Lots of cleanups and API refreshes for ASoC codec drivers and
     DaVinci.

   - Conversion of OMAP to dmaengine.

   - New machine driver for Wolfson Microelectronics Bells.

   - New CODEC driver for Wolfson Microelectronics WM0010.

   - Enhancements to the ux500 and wm2000 drivers

   - A new driver for DA9055 and the support for regulator bypass mode."

Fix up various arm soc header file reorg conflicts.

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)
  ALSA: hda - Add new codec ALC283 ALC290 support
  ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls
  ALSA: hda - fix indices on boost volume on Conexant
  ALSA: aloop - add locking to timer access
  ALSA: hda - Fix hang caused by race during suspend.
  sound: Remove unnecessary semicolon
  ALSA: hda/realtek - Fix detection of ALC271X codec
  ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
  ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event
  ALSA: hda - make a generic unsol event handler
  ASoC: codecs: Add DA9055 codec driver
  ASoC: eukrea-tlv320: Convert it to platform driver
  ALSA: ASoC: add DT bindings for CS4271
  ASoC: wm_hubs: Ensure volume updates are handled during class W startup
  ASoC: wm5110: Adding missing volume update bits
  ASoC: wm5110: Add OUT3R support
  ASoC: wm5110: Add AEC loopback support
  ASoC: wm5110: Rename EPOUT to HPOUT3
  ASoC: arizona: Add more clock rates
  ASoC: arizona: Add more DSP options for mixer input muxes
  ...

1 files changed, 96 insertions, 55 deletions

diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c
index 8d717f4b5a8..0935bfe6247 100644
--- a/sound/soc/codecs/sta32x.c
+++ b/sound/soc/codecs/sta32x.c
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
+#include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
@@ -55,12 +56,50 @@
 	 SNDRV_PCM_FMTBIT_S32_LE  | SNDRV_PCM_FMTBIT_S32_BE)
 
 /* Power-up register defaults */
-static const u8 sta32x_regs[STA32X_REGISTER_COUNT] = {
-	0x63, 0x80, 0xc2, 0x40, 0xc2, 0x5c, 0x10, 0xff, 0x60, 0x60,
-	0x60, 0x80, 0x00, 0x00, 0x00, 0x40, 0x80, 0x77, 0x6a, 0x69,
-	0x6a, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2d,
-	0xc0, 0xf3, 0x33, 0x00, 0x0c,
+static const struct reg_default sta32x_regs[] = {
+	{  0x0, 0x63 },
+	{  0x1, 0x80 },
+	{  0x2, 0xc2 },
+	{  0x3, 0x40 },
+	{  0x4, 0xc2 },
+	{  0x5, 0x5c },
+	{  0x6, 0x10 },
+	{  0x7, 0xff },
+	{  0x8, 0x60 },
+	{  0x9, 0x60 },
+	{  0xa, 0x60 },
+	{  0xb, 0x80 },
+	{  0xc, 0x00 },
+	{  0xd, 0x00 },
+	{  0xe, 0x00 },
+	{  0xf, 0x40 },
+	{ 0x10, 0x80 },
+	{ 0x11, 0x77 },
+	{ 0x12, 0x6a },
+	{ 0x13, 0x69 },
+	{ 0x14, 0x6a },
+	{ 0x15, 0x69 },
+	{ 0x16, 0x00 },
+	{ 0x17, 0x00 },
+	{ 0x18, 0x00 },
+	{ 0x19, 0x00 },
+	{ 0x1a, 0x00 },
+	{ 0x1b, 0x00 },
+	{ 0x1c, 0x00 },
+	{ 0x1d, 0x00 },
+	{ 0x1e, 0x00 },
+	{ 0x1f, 0x00 },
+	{ 0x20, 0x00 },
+	{ 0x21, 0x00 },
+	{ 0x22, 0x00 },
+	{ 0x23, 0x00 },
+	{ 0x24, 0x00 },
+	{ 0x25, 0x00 },
+	{ 0x26, 0x00 },
+	{ 0x27, 0x2d },
+	{ 0x28, 0xc0 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x0c },
 };
 
 /* regulator power supply names */
@@ -72,6 +111,7 @@ static const char *sta32x_supply_names[] = {
 
 /* codec private data */
 struct sta32x_priv {
+	struct regmap *regmap;
 	struct regulator_bulk_data supplies[ARRAY_SIZE(sta32x_supply_names)];
 	struct snd_soc_codec *codec;
 	struct sta32x_platform_data *pdata;
@@ -291,17 +331,15 @@ static int sta32x_sync_coef_shadow(struct snd_soc_codec *codec)
 
 static int sta32x_cache_sync(struct snd_soc_codec *codec)
 {
+	struct sta32x_priv *sta32x = codec->control_data;
 	unsigned int mute;
 	int rc;
 
-	if (!codec->cache_sync)
-		return 0;
-
 	/* mute during register sync */
 	mute = snd_soc_read(codec, STA32X_MMUTE);
 	snd_soc_write(codec, STA32X_MMUTE, mute | STA32X_MMUTE_MMUTE);
 	sta32x_sync_coef_shadow(codec);
-	rc = snd_soc_cache_sync(codec);
+	rc = regcache_sync(sta32x->regmap);
 	snd_soc_write(codec, STA32X_MMUTE, mute);
 	return rc;
 }
@@ -316,11 +354,11 @@ static void sta32x_watchdog(struct work_struct *work)
 
 	/* check if sta32x has reset itself */
 	confa_cached = snd_soc_read(codec, STA32X_CONFA);
-	codec->cache_bypass = 1;
+	regcache_cache_bypass(sta32x->regmap, true);
 	confa = snd_soc_read(codec, STA32X_CONFA);
-	codec->cache_bypass = 0;
+	regcache_cache_bypass(sta32x->regmap, false);
 	if (confa != confa_cached) {
-		codec->cache_sync = 1;
+		regcache_mark_dirty(sta32x->regmap);
 		sta32x_cache_sync(codec);
 	}
 
@@ -825,31 +863,21 @@ static int sta32x_probe(struct snd_soc_codec *codec)
 	sta32x->codec = codec;
 	sta32x->pdata = dev_get_platdata(codec->dev);
 
-	/* regulators */
-	for (i = 0; i < ARRAY_SIZE(sta32x->supplies); i++)
-		sta32x->supplies[i].supply = sta32x_supply_names[i];
-
-	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sta32x->supplies),
-				 sta32x->supplies);
-	if (ret != 0) {
-		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
-		goto err;
-	}
-
 	ret = regulator_bulk_enable(ARRAY_SIZE(sta32x->supplies),
 				    sta32x->supplies);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
-		goto err_get;
+		return ret;
 	}
 
 	/* Tell ASoC what kind of I/O to use to read the registers.  ASoC will
 	 * then do the I2C transactions itself.
 	 */
-	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
+	codec->control_data = sta32x->regmap;
+	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_REGMAP);
 	if (ret < 0) {
 		dev_err(codec->dev, "failed to set cache I/O (ret=%i)\n", ret);
-		return ret;
+		goto err;
 	}
 
 	/* Chip documentation explicitly requires that the reset values
@@ -858,13 +886,15 @@ static int sta32x_probe(struct snd_soc_codec *codec)
 	 * so the write to the these registers are suppressed by the cache
 	 * restore code when it skips writes of default registers.
 	 */
-	snd_soc_cache_write(codec, STA32X_CONFC, 0xc2);
-	snd_soc_cache_write(codec, STA32X_CONFE, 0xc2);
-	snd_soc_cache_write(codec, STA32X_CONFF, 0x5c);
-	snd_soc_cache_write(codec, STA32X_MMUTE, 0x10);
-	snd_soc_cache_write(codec, STA32X_AUTO1, 0x60);
-	snd_soc_cache_write(codec, STA32X_AUTO3, 0x00);
-	snd_soc_cache_write(codec, STA32X_C3CFG, 0x40);
+	regcache_cache_only(sta32x->regmap, true);
+	snd_soc_write(codec, STA32X_CONFC, 0xc2);
+	snd_soc_write(codec, STA32X_CONFE, 0xc2);
+	snd_soc_write(codec, STA32X_CONFF, 0x5c);
+	snd_soc_write(codec, STA32X_MMUTE, 0x10);
+	snd_soc_write(codec, STA32X_AUTO1, 0x60);
+	snd_soc_write(codec, STA32X_AUTO3, 0x00);
+	snd_soc_write(codec, STA32X_C3CFG, 0x40);
+	regcache_cache_only(sta32x->regmap, false);
 
 	/* set thermal warning adjustment and recovery */
 	if (!(sta32x->pdata->thermal_conf & STA32X_THERMAL_ADJUSTMENT_ENABLE))
@@ -915,9 +945,8 @@ static int sta32x_probe(struct snd_soc_codec *codec)
 
 	return 0;
 
-err_get:
-	regulator_bulk_free(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
 err:
+	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
 	return ret;
 }
 
@@ -928,13 +957,11 @@ static int sta32x_remove(struct snd_soc_codec *codec)
 	sta32x_watchdog_stop(sta32x);
 	sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF);
 	regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
-	regulator_bulk_free(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
 
 	return 0;
 }
 
-static int sta32x_reg_is_volatile(struct snd_soc_codec *codec,
-				  unsigned int reg)
+static bool sta32x_reg_is_volatile(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case STA32X_CONFA ... STA32X_L2ATRT:
@@ -949,10 +976,6 @@ static const struct snd_soc_codec_driver sta32x_codec = {
 	.remove =		sta32x_remove,
 	.suspend =		sta32x_suspend,
 	.resume =		sta32x_resume,
-	.reg_cache_size =	STA32X_REGISTER_COUNT,
-	.reg_word_size =	sizeof(u8),
-	.reg_cache_default =	sta32x_regs,
-	.volatile_register =	sta32x_reg_is_volatile,
 	.set_bias_level =	sta32x_set_bias_level,
 	.controls =		sta32x_snd_controls,
 	.num_controls =		ARRAY_SIZE(sta32x_snd_controls),
@@ -962,17 +985,45 @@ static const struct snd_soc_codec_driver sta32x_codec = {
 	.num_dapm_routes =	ARRAY_SIZE(sta32x_dapm_routes),
 };
 
+static const struct regmap_config sta32x_regmap = {
+	.reg_bits =		8,
+	.val_bits =		8,
+	.max_register =		STA32X_FDRC2,
+	.reg_defaults =		sta32x_regs,
+	.num_reg_defaults =	ARRAY_SIZE(sta32x_regs),
+	.cache_type =		REGCACHE_RBTREE,
+	.volatile_reg =		sta32x_reg_is_volatile,
+};
+
 static __devinit int sta32x_i2c_probe(struct i2c_client *i2c,
 				      const struct i2c_device_id *id)
 {
 	struct sta32x_priv *sta32x;
-	int ret;
+	int ret, i;
 
 	sta32x = devm_kzalloc(&i2c->dev, sizeof(struct sta32x_priv),
 			      GFP_KERNEL);
 	if (!sta32x)
 		return -ENOMEM;
 
+	/* regulators */
+	for (i = 0; i < ARRAY_SIZE(sta32x->supplies); i++)
+		sta32x->supplies[i].supply = sta32x_supply_names[i];
+
+	ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(sta32x->supplies),
+				      sta32x->supplies);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+		return ret;
+	}
+
+	sta32x->regmap = devm_regmap_init_i2c(i2c, &sta32x_regmap);
+	if (IS_ERR(sta32x->regmap)) {
+		ret = PTR_ERR(sta32x->regmap);
+		dev_err(&i2c->dev, "Failed to init regmap: %d\n", ret);
+		return ret;
+	}
+
 	i2c_set_clientdata(i2c, sta32x);
 
 	ret = snd_soc_register_codec(&i2c->dev, &sta32x_codec, &sta32x_dai, 1);
@@ -1006,17 +1057,7 @@ static struct i2c_driver sta32x_i2c_driver = {
 	.id_table = sta32x_i2c_id,
 };
 
-static int __init sta32x_init(void)
-{
-	return i2c_add_driver(&sta32x_i2c_driver);
-}
-module_init(sta32x_init);
-
-static void __exit sta32x_exit(void)
-{
-	i2c_del_driver(&sta32x_i2c_driver);
-}
-module_exit(sta32x_exit);
+module_i2c_driver(sta32x_i2c_driver);
 
 MODULE_DESCRIPTION("ASoC STA32X driver");
 MODULE_AUTHOR("Johannes Stezenbach <js@sig21.net>");