summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8903.c
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2010-03-15 21:22:58 +0000
committerMark Brown <broonie@opensource.wolfsonmicro.com>2010-03-16 15:57:43 +0000
commit7245387e36e16ae918467685c34510606fd74b7c (patch)
tree40ecf5eb8fb9eaa287c37d0dd99645380d3b0b90 /sound/soc/codecs/wm8903.c
parent8abd16a65d81756706016720e2cc7eeb81d06a2e (diff)
ASoC: Implement interrupt driven microphone detection for WM8903
Support use of the WM8903 IRQ for reporting of microphone presence and short detection. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'sound/soc/codecs/wm8903.c')
-rw-r--r--sound/soc/codecs/wm8903.c106
1 files changed, 103 insertions, 3 deletions
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 7aa2adbe6fb..b5427b47d6f 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -23,6 +23,7 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <sound/core.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/tlv.h>
@@ -223,6 +224,12 @@ struct wm8903_priv {
struct completion wseq;
+ struct snd_soc_jack *mic_jack;
+ int mic_det;
+ int mic_short;
+ int mic_last_report;
+ int mic_delay;
+
struct snd_pcm_substream *master_substream;
struct snd_pcm_substream *slave_substream;
};
@@ -1437,19 +1444,112 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
return 0;
}
+/**
+ * wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
+ *
+ * @codec: WM8903 codec
+ * @jack: jack to report detection events on
+ * @det: value to report for presence detection
+ * @shrt: value to report for short detection
+ *
+ * Enable microphone detection via IRQ on the WM8903. If GPIOs are
+ * being used to bring out signals to the processor then only platform
+ * data configuration is needed for WM8903 and processor GPIOs should
+ * be configured using snd_soc_jack_add_gpios() instead.
+ *
+ * The current threasholds for detection should be configured using
+ * micdet_cfg in the platform data. Using this function will force on
+ * the microphone bias for the device.
+ */
+int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
+ int det, int shrt)
+{
+ struct wm8903_priv *wm8903 = codec->private_data;
+ int irq_mask = 0;
+
+ dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
+ det, shrt);
+
+ /* Store the configuration */
+ wm8903->mic_jack = jack;
+ wm8903->mic_det = det;
+ wm8903->mic_short = shrt;
+
+ /* Enable interrupts we've got a report configured for */
+ if (det)
+ irq_mask &= ~WM8903_MICDET_EINT;
+ if (shrt)
+ irq_mask &= ~WM8903_MICSHRT_EINT;
+
+ snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
+ WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
+ irq_mask);
+
+ /* Enable mic detection, this may not have been set through
+ * platform data (eg, if the defaults are OK). */
+ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
+ WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
+ snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
+ WM8903_MICDET_ENA, WM8903_MICDET_ENA);
+
+ /* Force the microphone bias on; this will trigger an initial
+ * detection. */
+ snd_soc_dapm_force_enable_pin(codec, "Mic Bias");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm8903_mic_detect);
+
static irqreturn_t wm8903_irq(int irq, void *data)
{
struct wm8903_priv *wm8903 = data;
struct snd_soc_codec *codec = &wm8903->codec;
- int reg;
+ int mic_report;
+ int int_pol;
+ int int_val = 0;
+ int mask = ~snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1_MASK);
- reg = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1);
+ int_val = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1) & mask;
- if (reg & WM8903_WSEQ_BUSY_EINT) {
+ if (int_val & WM8903_WSEQ_BUSY_EINT) {
dev_dbg(codec->dev, "Write sequencer done\n");
complete(&wm8903->wseq);
}
+ /*
+ * The rest is microphone jack detection. We need to manually
+ * invert the polarity of the interrupt after each event - to
+ * simplify the code keep track of the last state we reported
+ * and just invert the relevant bits in both the report and
+ * the polarity register.
+ */
+ mic_report = wm8903->mic_last_report;
+ int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1);
+
+ if (int_val & WM8903_MICSHRT_EINT) {
+ dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol);
+
+ mic_report ^= wm8903->mic_short;
+ int_pol ^= WM8903_MICSHRT_INV;
+ }
+
+ if (int_val & WM8903_MICDET_EINT) {
+ dev_dbg(codec->dev, "Microphone detect (pol=%x)\n", int_pol);
+
+ mic_report ^= wm8903->mic_det;
+ int_pol ^= WM8903_MICDET_INV;
+
+ msleep(wm8903->mic_delay);
+ }
+
+ snd_soc_update_bits(codec, WM8903_INTERRUPT_POLARITY_1,
+ WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
+
+ snd_soc_jack_report(wm8903->mic_jack, mic_report,
+ wm8903->mic_short | wm8903->mic_det);
+
+ wm8903->mic_last_report = mic_report;
+
return IRQ_HANDLED;
}